summaryrefslogtreecommitdiffstats
path: root/openwrt/package/linux/kernel-source/include/bcm4710.h
diff options
context:
space:
mode:
Diffstat (limited to 'openwrt/package/linux/kernel-source/include/bcm4710.h')
-rw-r--r--openwrt/package/linux/kernel-source/include/bcm4710.h91
1 files changed, 0 insertions, 91 deletions
diff --git a/openwrt/package/linux/kernel-source/include/bcm4710.h b/openwrt/package/linux/kernel-source/include/bcm4710.h
deleted file mode 100644
index 8b059978b..000000000
--- a/openwrt/package/linux/kernel-source/include/bcm4710.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * BCM4710 address space map and definitions
- * Think twice before adding to this file, this is not the kitchen sink
- * These definitions are not guaranteed for all 47xx chips, only the 4710
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#ifndef _bcm4710_h_
-#define _bcm4710_h_
-
-/* Address map */
-#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */
-#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */
-#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */
-#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
-#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
-#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */
-
-/* Core register space */
-#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */
-#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */
-#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */
-#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */
-#define BCM4710_REG_USB 0x18004000 /* USB core registers */
-#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */
-#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */
-#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */
-#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */
-
-#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */
-#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */
-#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */
-#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */
-#define BCM4710_PROG 0x1f800000 /* Programable interface */
-#define BCM4710_FLASH 0x1fc00000 /* Flash */
-
-#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
-
-#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300)
-
-#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000)
-#define BCM4710_LED (BCM4710_EXTIF + 0x00900000)
-
-#define SBFLAG_PCI 0
-#define SBFLAG_ENET0 1
-#define SBFLAG_ILINE20 2
-#define SBFLAG_CODEC 3
-#define SBFLAG_USB 4
-#define SBFLAG_EXTIF 5
-#define SBFLAG_ENET1 6
-
-#ifdef CONFIG_HWSIM
-#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0)
-#else
-#define BCM4710_TRACE(trval)
-#endif
-
-
-/* BCM94702 CPCI -ExtIF used for LocalBus devs */
-
-#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF
-#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000)
-#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000)
-#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR
-#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000)
-#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000)
-#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
-
-#define LED_REG(x) \
- (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
-
-/*
- * Reset function implemented in PLD. Read or write should trigger hard reset
- */
-#define SYS_HARD_RESET() \
- { for (;;) \
- *( (volatile unsigned char *)\
- KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
- }
-
-#endif /* _bcm4710_h_ */