move package/linux into target/linux, use wbx' new kernel code. support building images with more than one kernel, split kernel module parts off of packages that use their own kernel modules (fuse, shfs, openswan). some cleanup in the image building process in target/. image builder is disabled for now, needs some fixing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1085 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 91 deletions

diff --git a/openwrt/package/linux/kernel-source/include/bcm4710.h b/openwrt/package/linux/kernel-source/include/bcm4710.h
deleted file mode 100644
index 8b059978b..000000000
--- a/openwrt/package/linux/kernel-source/include/bcm4710.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * BCM4710 address space map and definitions
- * Think twice before adding to this file, this is not the kitchen sink
- * These definitions are not guaranteed for all 47xx chips, only the 4710
- *
- * Copyright 2004, Broadcom Corporation   
- * All Rights Reserved.   
- *    
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
- *
- * $Id$
- */
-
-#ifndef _bcm4710_h_
-#define _bcm4710_h_
-
-/* Address map */
-#define BCM4710_SDRAM		0x00000000	/* Physical SDRAM */
-#define BCM4710_PCI_MEM		0x08000000	/* Host Mode PCI memory access space (64 MB) */
-#define BCM4710_PCI_CFG		0x0c000000	/* Host Mode PCI configuration space (64 MB) */
-#define BCM4710_PCI_DMA		0x40000000	/* Client Mode PCI memory access space (1 GB) */
-#define	BCM4710_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
-#define BCM4710_ENUM		0x18000000	/* Beginning of core enumeration space */
-
-/* Core register space */
-#define BCM4710_REG_SDRAM	0x18000000	/* SDRAM core registers */
-#define BCM4710_REG_ILINE20	0x18001000	/* InsideLine20 core registers */
-#define BCM4710_REG_EMAC0	0x18002000	/* Ethernet MAC 0 core registers */
-#define BCM4710_REG_CODEC	0x18003000	/* Codec core registers */
-#define BCM4710_REG_USB		0x18004000	/* USB core registers */
-#define BCM4710_REG_PCI		0x18005000	/* PCI core registers */
-#define BCM4710_REG_MIPS	0x18006000	/* MIPS core registers */
-#define BCM4710_REG_EXTIF	0x18007000	/* External Interface core registers */
-#define BCM4710_REG_EMAC1	0x18008000	/* Ethernet MAC 1 core registers */
-
-#define	BCM4710_EXTIF		0x1f000000	/* External Interface base address */
-#define BCM4710_PCMCIA_MEM	0x1f000000	/* External Interface PCMCIA memory access */
-#define BCM4710_PCMCIA_IO	0x1f100000	/* PCMCIA I/O access */
-#define BCM4710_PCMCIA_CONF	0x1f200000	/* PCMCIA configuration */
-#define BCM4710_PROG		0x1f800000	/* Programable interface */
-#define BCM4710_FLASH		0x1fc00000	/* Flash */
-
-#define	BCM4710_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
-
-#define	BCM4710_UART		(BCM4710_REG_EXTIF + 0x00000300)
-
-#define	BCM4710_EUART		(BCM4710_EXTIF + 0x00800000)
-#define	BCM4710_LED		(BCM4710_EXTIF + 0x00900000)
-
-#define	SBFLAG_PCI	0
-#define	SBFLAG_ENET0	1
-#define	SBFLAG_ILINE20	2
-#define	SBFLAG_CODEC	3
-#define	SBFLAG_USB	4
-#define	SBFLAG_EXTIF	5
-#define	SBFLAG_ENET1	6
-
-#ifdef	CONFIG_HWSIM
-#define	BCM4710_TRACE(trval)        do { *((int *)0xa0000f18) = (trval); } while (0)
-#else
-#define	BCM4710_TRACE(trval)
-#endif
-
-
-/* BCM94702 CPCI -ExtIF used for LocalBus devs */
-
-#define BCM94702_CPCI_RESET_ADDR    	 BCM4710_EXTIF
-#define BCM94702_CPCI_BOARDID_ADDR  	(BCM4710_EXTIF | 0x4000)
-#define BCM94702_CPCI_DOC_ADDR      	(BCM4710_EXTIF | 0x6000)
-#define BCM94702_DOC_ADDR                BCM94702_CPCI_DOC_ADDR
-#define BCM94702_CPCI_LED_ADDR      	(BCM4710_EXTIF | 0xc000)
-#define BCM94702_CPCI_NVRAM_ADDR    	(BCM4710_EXTIF | 0xe000)
-#define BCM94702_CPCI_NVRAM_SIZE         0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-#define BCM94702_CPCI_TOD_REG_BASE       (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
-
-#define LED_REG(x)      \
- (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
-
-/* 
- * Reset function implemented in PLD.  Read or write should trigger hard reset 
- */
-#define SYS_HARD_RESET()   \
-    { for (;;) \
-     *( (volatile unsigned char *)\
-      KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
-    }
-
-#endif /* _bcm4710_h_ */