allow building of kernel-specific stuff in package/ instead of target/linux/package/ and merge target/linux/package/base-files into package/base-files

git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3855 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 66 insertions, 0 deletions

diff --git a/package/base-files/brcm-2.4/etc/init.d/S04nvram b/package/base-files/brcm-2.4/etc/init.d/S04nvram
new file mode 100755
index 000000000..4de124735
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/init.d/S04nvram
@@ -0,0 +1,66 @@
+#!/bin/sh
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware.
+
+# WGT634u
+grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
+
+alias debug=${DEBUG:-:}
+
+nvram_default() {
+	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+nvram_set() { # for the linksys fixup part
+	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
+		COMMIT=1
+		/usr/sbin/nvram set "$1=$2"
+	}
+}
+
+# work around braindead CFE defaults in linksys routers
+boardtype=$(nvram get boardtype)
+boardnum=$(nvram get boardnum)
+boardflags=$(($(nvram get boardflags)))
+adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
+
+case "$(( $boardtype ))" in
+	"1800") #0x708
+		if [ "$adm_switch" = 0 ]; then
+			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+			[ "$COMMIT" = 1 ] && {
+				nvram_set sdram_config 0x0062
+				nvram_set clkfreq 216
+				nvram_set sdram_ncdl 0x0
+				nvram_set pa0itssit 62
+				nvram_set pa0b0 0x15eb
+				nvram_set pa0b1 0xfa82
+				nvram_set pa0b2 0xfe66
+				nvram_set pa0maxpwr 0x4e
+			}
+		fi
+	;;
+	"1127") #0x467
+		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+		[ "$COMMIT" = 1 ] && {
+			nvram_set sdram_config 0x0062
+			nvram_set sdram_ncdl 0x0
+			nvram_set pa0itssit 62
+			nvram_set pa0b0 0x168b
+			nvram_set pa0b1 0xfabf
+			nvram_set pa0b2 0xfeaf
+			nvram_set pa0maxpwr 0x4e
+		}
+	;;
+esac
+[ "$COMMIT" = "1" ] && nvram commit
+
+# hack for some motorola routers
+nvram unset wl0gpio0
+
+[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+	# if default wifi mac, set two higher than the lan mac
+	nvram set il0macaddr=$(nvram get et0macaddr|
+	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+}