allow building of kernel-specific stuff in package/ instead of target/linux/package/ and merge target/linux/package/base-files into package/base-files

git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3855 3c298f89-4303-0410-b956-a3cf2f4a3e73

23 files changed, 729 insertions, 14 deletions

diff --git a/package/base-files/Makefile b/package/base-files/Makefile
index 263794969..536857657 100644
--- a/package/base-files/Makefile
+++ b/package/base-files/Makefile
@@ -3,14 +3,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=7
+PKG_RELEASE:=8
 PKG_BUILD_DIR:=$(BUILD_DIR)/base-files
 
-BOARD:=$(shell LANG=C grep ^CONFIG_LINUX_2_._ $(TOPDIR)/.config|sed -e "s/=y//" \
-	-e "s/.*_//"| tr "[:upper:]" "[:lower:]")
-KERNEL:=$(shell LANG=C grep ^CONFIG_LINUX_2_._ $(TOPDIR)/.config|sed -e "s/=y//" \
-	-e "s/CONFIG_LINUX_//" -e "s/_BRCM//" -e "s/_/./"| tr "[:upper:]" "[:lower:]")
-
 REV:=$(shell LANG=C svn info | awk '/^Revision:/ { print$$2 }' )
 ifeq ($(REV),)
 REV:=0
@@ -18,16 +13,23 @@ endif
 
 include $(TOPDIR)/package/rules.mk
 
-#FIXME: use the version from ./toolchain/uclibc
-UCLIBC_VERSION:=0.9.28
-LIBGCC_VERSION:=$(CONFIG_GCC_VERSION)
+ifneq ($(DUMP),1)
+include $(BUILD_DIR)/kernel.mk
+include $(TOPDIR)/target/linux/rules.mk
+TARGET:=-$(BOARD)-$(KERNEL)
+
+UCLIBC_VERSION:=${shell cat $(STAGING_DIR)/uclibc_version}
+LIBGCC_VERSION:=${shell cat $(STAGING_DIR)/gcc_version}
+endif
+
+CONFIG_PACKAGE_base-files$(TARGET):=CONFIG_PACKAGE_base-files
 
-define Package/base-files
+define Package/base-files$(TARGET)
  SECTION:=base
  CATEGORY:=Base system
  DEFAULT:=y
  TITLE:=OpenWrt system scripts
- DESCRIPTION:=OpenWrt system scripts
+ DESCRIPTION:=Base filesystem for OpenWrt
 endef
 
 define Package/libgcc
@@ -40,7 +42,7 @@ define Package/libgcc
 endef
 
 define Package/uclibc
- $(call Package/base-files)
+ $(call Package/base-files$(TARGET))
  VERSION:=$(UCLIBC_VERSION)-$(PKG_RELEASE)
  TITLE:=C library
  DESCRIPTION:=C library for embedded systems
@@ -51,11 +53,35 @@ define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)
 endef
 
+
+define Build/Compile/ar7
+	$(TARGET_CC) -o $(PKG_BUILD_DIR)/adam2patcher src/adam2patcher.c
+endef
+
+define Build/Compile/brcm
+	$(TARGET_CC) -o $(PKG_BUILD_DIR)/jffs2root src/jffs2root.c
+endef
+
 define Build/Compile
+$(call Build/Compile/$(BOARD))
+endef
+
+
+define Package/base-files$(TARGET)/install-ar7
+	mkdir -p $(1)/sbin
+	$(CP) $(PKG_BUILD_DIR)/adam2patcher $(1)/sbin
+endef
+define Package/base-files$(TARGET)/install-brcm
+	mkdir -p $(1)/sbin
+	$(CP) $(PKG_BUILD_DIR)/jffs2root $(1)/sbin
 endef
 
-define Package/base-files/install
+define Package/base-files$(TARGET)/install
+$(call Package/base-files$(TARGET)/install-$(BOARD),$(1))
 	$(CP) ./default/* $(1)
+	if [ -d $(BOARD)-$(KERNEL) ]; then \
+		$(CP) $(BOARD)-$(KERNEL)/* $(1)/; \
+	fi
 	$(SED) 's,$$$$R,r$(REV),g' $(1)/etc/banner
 	$(SED) 's,$$$$S,$(BOARD)-$(KERNEL),g' $(1)/etc/ipkg.conf
 	mkdir -p $(1)/dev
@@ -92,6 +118,6 @@ define Package/libgcc/install
 	$(CP) $(STAGING_DIR)/lib/libgcc_s.so.* $(1)/lib/
 endef
 
-$(eval $(call BuildPackage,base-files))
+$(eval $(call BuildPackage,base-files$(TARGET)))
 $(eval $(call BuildPackage,libgcc))
 $(eval $(call BuildPackage,uclibc))
diff --git a/package/base-files/ar7-2.4/etc/config/network b/package/base-files/ar7-2.4/etc/config/network
new file mode 100644
index 000000000..353538bf4
--- /dev/null
+++ b/package/base-files/ar7-2.4/etc/config/network
@@ -0,0 +1,27 @@
+# Network configuration file
+# Uncomment the following statements to change the network configuration
+
+## LAN configuration
+lan_ifname="eth0"
+lan_proto="static"
+lan_ipaddr="192.168.1.1"
+lan_netmask="255.255.255.0"
+# lan_gateway=""
+# lan_dns=""
+
+## WAN configuration
+# wan_proto=pppoe
+wan_ifname=ppp0
+wan_device=nas0
+atm_vpi=8
+atm_vci=35
+# ppp_username=my_username
+# ppp_passwd=my_passwd
+
+## WAN configuration (pppoe)
+pppoe_atm=1
+ppp_mtu=1492
+
+## WAN configuration (pppoa)
+# ppp_mtu=1500
+
diff --git a/package/base-files/ar7-2.4/etc/init.d/S00adam2 b/package/base-files/ar7-2.4/etc/init.d/S00adam2
new file mode 100755
index 000000000..0ca4c0145
--- /dev/null
+++ b/package/base-files/ar7-2.4/etc/init.d/S00adam2
@@ -0,0 +1,8 @@
+#!/bin/sh
+# ADAM2 patcher for Netgear DG834 and compatible
+MD5="$(md5sum /dev/mtdblock/0  | awk '{print $1}')"
+[ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && {
+	mtd unlock adam2
+	/sbin/adam2patcher /dev/mtdblock/0
+}
+rm -f /etc/init.d/S00adam2 /sbin/adam2patcher >&- 2>&-
diff --git a/package/base-files/aruba-2.6/etc/config/network b/package/base-files/aruba-2.6/etc/config/network
new file mode 100644
index 000000000..f60332cd8
--- /dev/null
+++ b/package/base-files/aruba-2.6/etc/config/network
@@ -0,0 +1,5 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="eth0"
+lan_proto="dhcp"
diff --git a/package/base-files/aruba-2.6/etc/init.d/S00aruba b/package/base-files/aruba-2.6/etc/init.d/S00aruba
new file mode 100755
index 000000000..9836de423
--- /dev/null
+++ b/package/base-files/aruba-2.6/etc/init.d/S00aruba
@@ -0,0 +1,4 @@
+#!/bin/sh
+mount none /proc -t proc
+mount_root failsafe
+mount -o remount,rw /dev/root /
diff --git a/package/base-files/aruba-2.6/init b/package/base-files/aruba-2.6/init
new file mode 100755
index 000000000..8ca48a04c
--- /dev/null
+++ b/package/base-files/aruba-2.6/init
@@ -0,0 +1,3 @@
+#!/bin/ash
+mount none /dev -t devfs
+exec /bin/busybox init
diff --git a/package/base-files/au1000-2.6/etc/config/network b/package/base-files/au1000-2.6/etc/config/network
new file mode 100644
index 000000000..2cc9e2671
--- /dev/null
+++ b/package/base-files/au1000-2.6/etc/config/network
@@ -0,0 +1,12 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="br0"
+lan_ifnames="eth0 ath0"
+lan_proto="static"
+lan_ipaddr="192.168.1.1"
+lan_netmask="255.255.255.0"
+
+## WAN configuration
+wan_ifname=""
+wan_proto="none"
diff --git a/package/base-files/au1000-2.6/sbin/mount_root b/package/base-files/au1000-2.6/sbin/mount_root
new file mode 100755
index 000000000..5dd1b0c56
--- /dev/null
+++ b/package/base-files/au1000-2.6/sbin/mount_root
@@ -0,0 +1,23 @@
+#!/bin/sh
+size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo)
+mount none /tmp -t tmpfs -o size=$size
+
+if [ "$1" != "failsafe" ]; then 
+	mtd unlock filesystem
+	mount | grep jffs2 >&-
+	if [ $? = 0 ] ; then
+		if [ $(cat /proc/mtd | wc -l) = 6 ]; then
+			mtd erase filesystem
+			jffs2root --move
+		else
+			mount -o remount,rw /dev/root /
+		fi
+	else
+		. /bin/firstboot
+	fi
+fi
+
+mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777
+mkdir -p /dev/pts
+mount none /dev/pts -t devpts
+mount -t sysfs none /sys 2>&-
diff --git a/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net b/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net
new file mode 100644
index 000000000..9dd77963b
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/hotplug.d/net/09-net
@@ -0,0 +1,43 @@
+#!/bin/sh
+setup_wl()
+{
+	[ -f /proc/net/wl0 ] && {
+		lsmod | grep wlcompat >&- || insmod wlcompat
+	}
+	iwconfig "$INTERFACE" 2>&- | grep -v 'no wireless' >&- && {
+		/sbin/wifi
+	}
+}
+setup_eth()
+{
+	[ -d /proc/switch ] || {
+		insmod switch-core
+		insmod switch-robo || insmod switch-adm
+	}
+	if="$(echo "$INTERFACE" | sed s,eth,et,)"
+	ifconfig "$INTERFACE" up 2>&- >&-
+	[ -d "/proc/switch/$INTERFACE" ] || return 0
+	echo "1" > "/proc/switch/$INTERFACE/reset"
+	echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
+	for vlan in $(seq 0 15); do
+		eval "hwname=\"\${vlan${vlan}hwname}\""
+		[ "$hwname" = "$if" ] && {
+			eval "vports=\"\${vlan${vlan}ports}\""
+			[ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
+			$DEBUG vconfig add "$INTERFACE" "$vlan"
+		}
+	done
+}
+
+do_register()
+{
+	case "${INTERFACE%%[0-9]*}" in
+		eth) setup_eth;;
+		wl) setup_wl;;
+	esac
+}
+
+
+case "$ACTION" in
+	add|register) do_register;;
+esac
diff --git a/package/base-files/brcm-2.4/etc/init.d/S04nvram b/package/base-files/brcm-2.4/etc/init.d/S04nvram
new file mode 100755
index 000000000..4de124735
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/init.d/S04nvram
@@ -0,0 +1,66 @@
+#!/bin/sh
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware.
+
+# WGT634u
+grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
+
+alias debug=${DEBUG:-:}
+
+nvram_default() {
+	[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+nvram_set() { # for the linksys fixup part
+	[ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
+		COMMIT=1
+		/usr/sbin/nvram set "$1=$2"
+	}
+}
+
+# work around braindead CFE defaults in linksys routers
+boardtype=$(nvram get boardtype)
+boardnum=$(nvram get boardnum)
+boardflags=$(($(nvram get boardflags)))
+adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
+
+case "$(( $boardtype ))" in
+	"1800") #0x708
+		if [ "$adm_switch" = 0 ]; then
+			nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+			[ "$COMMIT" = 1 ] && {
+				nvram_set sdram_config 0x0062
+				nvram_set clkfreq 216
+				nvram_set sdram_ncdl 0x0
+				nvram_set pa0itssit 62
+				nvram_set pa0b0 0x15eb
+				nvram_set pa0b1 0xfa82
+				nvram_set pa0b2 0xfe66
+				nvram_set pa0maxpwr 0x4e
+			}
+		fi
+	;;
+	"1127") #0x467
+		nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+		[ "$COMMIT" = 1 ] && {
+			nvram_set sdram_config 0x0062
+			nvram_set sdram_ncdl 0x0
+			nvram_set pa0itssit 62
+			nvram_set pa0b0 0x168b
+			nvram_set pa0b1 0xfabf
+			nvram_set pa0b2 0xfeaf
+			nvram_set pa0maxpwr 0x4e
+		}
+	;;
+esac
+[ "$COMMIT" = "1" ] && nvram commit
+
+# hack for some motorola routers
+nvram unset wl0gpio0
+
+[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+	# if default wifi mac, set two higher than the lan mac
+	nvram set il0macaddr=$(nvram get et0macaddr|
+	awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+}
diff --git a/package/base-files/brcm-2.4/etc/init.d/S05netconfig b/package/base-files/brcm-2.4/etc/init.d/S05netconfig
new file mode 100755
index 000000000..6a626f54a
--- /dev/null
+++ b/package/base-files/brcm-2.4/etc/init.d/S05netconfig
@@ -0,0 +1,108 @@
+#!/bin/sh
+[ -e /etc/config/network ] && exit 0
+
+mkdir -p /etc/config
+
+(
+	if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
+		# WGT634u
+		echo boardtype=wgt634u
+	else
+		strings /dev/mtdblock/3
+	fi
+) | awk '
+function p(name) {
+	if (c[name] != "") print name "=\"" c[name] "\""
+}
+
+BEGIN {
+	FS="="
+	c["lan_ifname"]="br0"
+	c["lan_ifnames"]="vlan0 eth1"
+	c["wan_proto"]="none"
+	c["wan_ifname"]="vlan1"
+	c["vlan0ports"]="1 2 3 4 5*"
+	c["vlan1ports"]="0 5"
+}
+
+($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+	nvram[$1] = $2
+}
+
+END {
+	# v1 hardware
+	if (nvram["boardtype"] == "bcm94710dev") {
+		# Linksys WRT54G v1.x
+		if (nvram["boardnum"] == "42") {
+			c["vlan0ports"]=""
+			c["vlan1ports"]=""
+			c["lan_ifnames"]="vlan2 eth2"
+		}
+
+		# Asus WL-500g
+		if (nvram["boardnum"] == "asusX") {
+			c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
+			# wan_ifname=eth1
+		}
+	}
+	if (nvram["boardtype"] == "wgt634u") {
+		c["vlan0ports"] = "0 1 2 3 5*"
+		c["vlan1ports"] = "4 5"
+		c["lan_ifnames"] = "vlan0 ath0"
+	}
+	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+		c["vlan0ports"] = "0 1 2 3 5*"
+		c["vlan1ports"] = "4 5"
+	}
+
+	# WAP54G
+	if ((nvram["boardnum"] == "2") || \
+		(nvram["boardnum"] == "1024")) {
+		c["lan_ifnames"]="eth0 eth1"
+		c["wan_ifname"]=""
+	}
+
+	print "#### VLAN configuration "
+	print "vlan0hwname=et0"
+	print "vlan1hwname=et0"
+	p("vlan0ports")
+	p("vlan1ports")
+	print ""
+	print ""
+	
+	print "#### LAN configuration"
+	print "lan_proto=\"static\""
+	p("lan_ifname")
+	p("lan_ifnames")
+	print "lan_ipaddr=\"192.168.1.1\""
+	print "lan_netmask=\"255.255.255.0\""
+	print "# lan_dns=\"192.168.1.1\""
+	print "# lan_gateway=\"192.168.1.1\""
+
+	print ""
+	print ""
+
+	print "#### WAN configuration"
+	print "# wan_proto: WAN protocol, available protocols:"
+	print "#   none: disable"
+	print "#   dhcp: DHCP"
+	print "#   static: Static IP"
+	print "#   pppoe: PPP over Ethernet"
+	print "#   pptp: Point-to-Point tunneling Protocol"
+	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
+	print ""
+	print "wan_proto=dhcp"
+	p("wan_ifname")
+	print "wan_device=\"" c["wan_ifname"] "\""
+	print "# wan_ipaddr=\"192.168.0.2\""
+	print "# wan_netmask=\"255.255.255.0\""
+	print "# wan_gateway=\"192.168.0.1\""
+	print "# wan_dns=\"192.168.0.1\""
+	print ""
+	print "## PPP over Ethernet and PPTP"
+	print "# wan_ifname=\"ppp0\""
+	print "# ppp_username=\"my_username\""
+	print "# ppp_passwd=\"my_password\""
+	print "# pptp_server_ip=\"192.168.0.1\""
+}
+' > /etc/config/network
diff --git a/package/base-files/brcm-2.6/etc/hotplug.d/net/09-net b/package/base-files/brcm-2.6/etc/hotplug.d/net/09-net
new file mode 100644
index 000000000..8bbf604df
--- /dev/null
+++ b/package/base-files/brcm-2.6/etc/hotplug.d/net/09-net
@@ -0,0 +1,33 @@
+#!/bin/sh
+setup_eth()
+{
+	[ -d /proc/switch ] || {
+		insmod switch-core
+		insmod switch-robo || insmod switch-adm
+	}
+	if="$(echo "$INTERFACE" | sed s,eth,et,)"
+	ifconfig "$INTERFACE" up 2>&- >&-
+	[ -d "/proc/switch/$INTERFACE" ] || return 0
+	echo "1" > "/proc/switch/$INTERFACE/reset"
+	echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
+	for vlan in $(seq 0 15); do
+		eval "hwname=\"\${vlan${vlan}hwname}\""
+		[ "$hwname" = "$if" ] && {
+			eval "vports=\"\${vlan${vlan}ports}\""
+			[ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
+			$DEBUG vconfig add "$INTERFACE" "$vlan"
+		}
+	done
+}
+
+do_register()
+{
+	case "${INTERFACE%%[0-9]*}" in
+		eth) setup_eth;;
+	esac
+}
+
+
+case "$ACTION" in
+	add|register) do_register;;
+esac
diff --git a/package/base-files/brcm-2.6/etc/init.d/S05netconfig b/package/base-files/brcm-2.6/etc/init.d/S05netconfig
new file mode 100755
index 000000000..6a626f54a
--- /dev/null
+++ b/package/base-files/brcm-2.6/etc/init.d/S05netconfig
@@ -0,0 +1,108 @@
+#!/bin/sh
+[ -e /etc/config/network ] && exit 0
+
+mkdir -p /etc/config
+
+(
+	if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
+		# WGT634u
+		echo boardtype=wgt634u
+	else
+		strings /dev/mtdblock/3
+	fi
+) | awk '
+function p(name) {
+	if (c[name] != "") print name "=\"" c[name] "\""
+}
+
+BEGIN {
+	FS="="
+	c["lan_ifname"]="br0"
+	c["lan_ifnames"]="vlan0 eth1"
+	c["wan_proto"]="none"
+	c["wan_ifname"]="vlan1"
+	c["vlan0ports"]="1 2 3 4 5*"
+	c["vlan1ports"]="0 5"
+}
+
+($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+	nvram[$1] = $2
+}
+
+END {
+	# v1 hardware
+	if (nvram["boardtype"] == "bcm94710dev") {
+		# Linksys WRT54G v1.x
+		if (nvram["boardnum"] == "42") {
+			c["vlan0ports"]=""
+			c["vlan1ports"]=""
+			c["lan_ifnames"]="vlan2 eth2"
+		}
+
+		# Asus WL-500g
+		if (nvram["boardnum"] == "asusX") {
+			c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
+			# wan_ifname=eth1
+		}
+	}
+	if (nvram["boardtype"] == "wgt634u") {
+		c["vlan0ports"] = "0 1 2 3 5*"
+		c["vlan1ports"] = "4 5"
+		c["lan_ifnames"] = "vlan0 ath0"
+	}
+	if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+		c["vlan0ports"] = "0 1 2 3 5*"
+		c["vlan1ports"] = "4 5"
+	}
+
+	# WAP54G
+	if ((nvram["boardnum"] == "2") || \
+		(nvram["boardnum"] == "1024")) {
+		c["lan_ifnames"]="eth0 eth1"
+		c["wan_ifname"]=""
+	}
+
+	print "#### VLAN configuration "
+	print "vlan0hwname=et0"
+	print "vlan1hwname=et0"
+	p("vlan0ports")
+	p("vlan1ports")
+	print ""
+	print ""
+	
+	print "#### LAN configuration"
+	print "lan_proto=\"static\""
+	p("lan_ifname")
+	p("lan_ifnames")
+	print "lan_ipaddr=\"192.168.1.1\""
+	print "lan_netmask=\"255.255.255.0\""
+	print "# lan_dns=\"192.168.1.1\""
+	print "# lan_gateway=\"192.168.1.1\""
+
+	print ""
+	print ""
+
+	print "#### WAN configuration"
+	print "# wan_proto: WAN protocol, available protocols:"
+	print "#   none: disable"
+	print "#   dhcp: DHCP"
+	print "#   static: Static IP"
+	print "#   pppoe: PPP over Ethernet"
+	print "#   pptp: Point-to-Point tunneling Protocol"
+	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
+	print ""
+	print "wan_proto=dhcp"
+	p("wan_ifname")
+	print "wan_device=\"" c["wan_ifname"] "\""
+	print "# wan_ipaddr=\"192.168.0.2\""
+	print "# wan_netmask=\"255.255.255.0\""
+	print "# wan_gateway=\"192.168.0.1\""
+	print "# wan_dns=\"192.168.0.1\""
+	print ""
+	print "## PPP over Ethernet and PPTP"
+	print "# wan_ifname=\"ppp0\""
+	print "# ppp_username=\"my_username\""
+	print "# ppp_passwd=\"my_password\""
+	print "# pptp_server_ip=\"192.168.0.1\""
+}
+' > /etc/config/network
diff --git a/package/base-files/sibyte-2.6/etc/config/network b/package/base-files/sibyte-2.6/etc/config/network
new file mode 100644
index 000000000..2cc9e2671
--- /dev/null
+++ b/package/base-files/sibyte-2.6/etc/config/network
@@ -0,0 +1,12 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="br0"
+lan_ifnames="eth0 ath0"
+lan_proto="static"
+lan_ipaddr="192.168.1.1"
+lan_netmask="255.255.255.0"
+
+## WAN configuration
+wan_ifname=""
+wan_proto="none"
diff --git a/package/base-files/sibyte-2.6/etc/inittab b/package/base-files/sibyte-2.6/etc/inittab
new file mode 100644
index 000000000..6eef29efb
--- /dev/null
+++ b/package/base-files/sibyte-2.6/etc/inittab
@@ -0,0 +1,3 @@
+::sysinit:/etc/init.d/rcS
+duart/0::askfirst:/bin/ash --login
+#tts/1::askfirst:/bin/ash --login
diff --git a/package/base-files/sibyte-2.6/init b/package/base-files/sibyte-2.6/init
new file mode 100755
index 000000000..1f98589eb
--- /dev/null
+++ b/package/base-files/sibyte-2.6/init
@@ -0,0 +1,6 @@
+#!/bin/ash
+mount none /dev -t devfs
+mount none /proc -t proc
+mount_root failsafe
+mount -o remount,rw /dev/root /
+exec /bin/busybox init
diff --git a/package/base-files/src/adam2patcher.c b/package/base-files/src/adam2patcher.c
new file mode 100644
index 000000000..25a78074a
--- /dev/null
+++ b/package/base-files/src/adam2patcher.c
@@ -0,0 +1,59 @@
+/*
+ * patcher.c - ADAM2 patcher for Netgear DG834 (and compatible)
+ *
+ * Copyright (C) 2006 Felix Fietkau
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <stdint.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <string.h>
+
+#include <sys/ioctl.h>
+
+int main(int argc, char **argv)
+{
+	int fd;
+	char *ptr;
+	uint32_t *i;
+
+	if (argc != 2) {
+		fprintf(stderr, "Usage: %s <filename>\n", argv[0]);
+		exit(1);
+	}
+
+	if (((fd = open(argv[1], O_RDWR)) < 0)
+			|| ((ptr = mmap(0, 128 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))) {
+		fprintf(stderr, "Can't open file\n");
+		exit(1);
+	}
+
+	i = (uint32_t *) &ptr[0x3944];
+	if (*i == 0x0c000944) {
+		fprintf(stderr, "Unpatched ADAM2 detected. Patching... ");
+		*i = 0x00000000;
+		msync(i, sizeof(*i), MS_SYNC|MS_INVALIDATE);
+		fprintf(stderr, "done!\n");
+	} else if (*i == 0x00000000) {
+		fprintf(stderr, "Patched ADAM2 detected.\n");
+	} else {
+		fprintf(stderr, "Unknown ADAM2 detected. Can't patch!\n");
+	}
+
+	close(fd);		
+}
diff --git a/package/base-files/src/jffs2root.c b/package/base-files/src/jffs2root.c
new file mode 100644
index 000000000..14662fc94
--- /dev/null
+++ b/package/base-files/src/jffs2root.c
@@ -0,0 +1,133 @@
+/*
+ * jffs2root.c
+ *
+ * Copyright (C) 2005 Mike Baker 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * $Id$
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <string.h>
+
+#include <sys/ioctl.h>
+#include <linux/mtd/mtd.h>
+
+#define FILENAME "/dev/mtdblock/1"
+
+struct trx_header {
+	unsigned magic;		/* "HDR0" */
+	unsigned len;		/* Length of file including header */
+	unsigned crc32;		/* 32-bit CRC from flag_version to end of file */
+	unsigned flag_version;	/* 0:15 flags, 16:31 version */
+	unsigned offsets[3];	/* Offsets of partitions from start of header */
+};
+
+unsigned long *crc32;
+
+void init_crc32()
+{
+	unsigned long crc;
+	unsigned long poly = 0xEDB88320L;
+	int n, bit;
+	if ((crc32 = (unsigned long *) malloc(256 * sizeof(unsigned long))) == (void *)-1) {
+		perror("malloc");
+		exit(1);
+	}
+	for (n = 0; n < 256; n++) {
+	crc = (unsigned long) n;
+	for (bit = 0; bit < 8; bit++)
+		crc = (crc & 1) ? (poly ^ (crc >> 1)) : (crc >> 1);
+	crc32[n] = crc;
+	}
+}
+
+unsigned int crc32buf(char *buf, size_t len)
+{
+	unsigned int crc = 0xFFFFFFFF;
+	for (; len; len--, buf++)
+	crc = crc32[(crc ^ *buf) & 0xff] ^ (crc >> 8);
+	return crc;
+}
+
+int main(int argc, char **argv)
+{
+	int fd;
+	struct mtd_info_user mtdInfo;
+	unsigned long len;
+	struct trx_header *ptr;
+	char *buf;
+	
+	if (((fd = open(FILENAME, O_RDWR))	< 0)
+			|| ((len = lseek(fd, 0, SEEK_END)) < 0)
+			|| ((ptr = (struct trx_header *) mmap(0, len, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))
+			|| (ptr->magic != 0x30524448)) {
+		printf("Error reading trx info\n");
+		exit(-1);
+	}
+	close (fd);
+
+	if (((fd = open("/dev/mtd/1", O_RDWR))	< 0)
+			|| (ioctl(fd, MEMGETINFO, &mtdInfo))) {
+		fprintf(stderr, "Could not get MTD device info from %s\n", FILENAME);
+		close(fd);
+		exit(1);
+	}
+	close(fd);
+
+	if (argc > 1 && !strcmp(argv[1],"--move")) {
+		if (ptr->offsets[2] >= ptr->len) {
+			printf("Partition already moved outside trx\n");
+		} else {
+			init_crc32();
+			ptr->offsets[2] +=	(mtdInfo.erasesize - 1);
+			ptr->offsets[2] &= ~(mtdInfo.erasesize - 1);
+			ptr->len = ptr->offsets[2];
+			ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version));
+			msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE);
+			printf("Partition moved; please reboot\n");
+		}
+	} else if (argc > 1 && !strcmp(argv[1], "--clean")) {
+		buf = (char *) ptr;
+		if (buf[ptr->offsets[1] - 1] == 0) {
+			init_crc32();
+			buf[ptr->offsets[1] - 1] = 1;
+			ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version));
+			msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE);
+			printf("Partition marked as clean\n");
+		}
+	} else {
+		int x;
+		printf(" erase: 0x%08x\n",mtdInfo.erasesize);
+		printf("=== trx ===\n");
+		printf("mapped: 0x%08x\n", (unsigned)ptr);
+		printf(" magic: 0x%08x\n", ptr->magic);
+		printf("	 len: 0x%08x\n", ptr->len);
+		printf("	 crc: 0x%08x\n", ptr->crc32);
+		for (x = 0; x < 3; x++)
+			printf(" offset[%d]: 0x%08x\n", x, ptr->offsets[x]);
+	}
+
+	munmap((void *) ptr, len);
+	return 0;
+}
diff --git a/package/base-files/x86-2.4/etc/config/network b/package/base-files/x86-2.4/etc/config/network
new file mode 100644
index 000000000..fd0f557c0
--- /dev/null
+++ b/package/base-files/x86-2.4/etc/config/network
@@ -0,0 +1,12 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="br0"
+lan_ifnames="eth1 eth2"
+lan_proto="static"
+lan_ipaddr="192.168.1.1"
+lan_netmask="255.255.255.0"
+
+## WAN configuration
+wan_ifname="eth0"
+wan_proto="dhcp"
diff --git a/package/base-files/x86-2.6/etc/config/network b/package/base-files/x86-2.6/etc/config/network
new file mode 100644
index 000000000..fd0f557c0
--- /dev/null
+++ b/package/base-files/x86-2.6/etc/config/network
@@ -0,0 +1,12 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="br0"
+lan_ifnames="eth1 eth2"
+lan_proto="static"
+lan_ipaddr="192.168.1.1"
+lan_netmask="255.255.255.0"
+
+## WAN configuration
+wan_ifname="eth0"
+wan_proto="dhcp"
diff --git a/package/base-files/xscale-2.6/etc/config/network b/package/base-files/xscale-2.6/etc/config/network
new file mode 100644
index 000000000..f60332cd8
--- /dev/null
+++ b/package/base-files/xscale-2.6/etc/config/network
@@ -0,0 +1,5 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="eth0"
+lan_proto="dhcp"
diff --git a/package/base-files/xscale-2.6/etc/init.d/S00xscale b/package/base-files/xscale-2.6/etc/init.d/S00xscale
new file mode 100755
index 000000000..9836de423
--- /dev/null
+++ b/package/base-files/xscale-2.6/etc/init.d/S00xscale
@@ -0,0 +1,4 @@
+#!/bin/sh
+mount none /proc -t proc
+mount_root failsafe
+mount -o remount,rw /dev/root /
diff --git a/package/base-files/xscale-2.6/init b/package/base-files/xscale-2.6/init
new file mode 100755
index 000000000..8ca48a04c
--- /dev/null
+++ b/package/base-files/xscale-2.6/init
@@ -0,0 +1,3 @@
+#!/bin/ash
+mount none /dev -t devfs
+exec /bin/busybox init