path: root/target/linux/realtek/files/drivers/net/wireless/rtl8192e/8192cd_host.c

/*
 *  Routines to handle host CPU related functions
 *
 *  $Id: 8192cd_host.c,v 1.1 2012/05/04 13:48:37 jimmylin Exp $
 *
 *  Copyright (c) 2012 Realtek Semiconductor Corp.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 */

#define _8192CD_HOST_C_

#ifdef __KERNEL__
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/if.h>
#include <asm/io.h>
#include <linux/major.h>
#include <linux/fcntl.h>
#include <asm/uaccess.h>
#endif

#include "./8192cd_cfg.h"

#ifdef __KERNEL__
#ifdef __LINUX_2_6__
#include <linux/syscalls.h>
#include <linux/file.h>
#include <asm/unistd.h>
#endif
#elif defined(__ECOS)
#include <cyg/hal/plf_intr.h>
#include <cyg/io/eth/rltk/819x/wrapper/sys_support.h>
#include <cyg/io/eth/rltk/819x/wrapper/skbuff.h>
#include <cyg/io/eth/rltk/819x/wrapper/timer.h>
#include <cyg/io/eth/rltk/819x/wrapper/wrapper.h>
#else
#include "./sys-support.h"
#endif

#include "./8192cd.h"
#include "./8192cd_headers.h"
#include "./8192cd_debug.h"

#ifdef CONFIG_RTL8672
	#ifdef USE_RLX_BSP
		#include <bspchip.h>
		#include <gpio.h>

		#ifdef CONFIG_RTL_8196C
		#undef CONFIG_RTL_8196C
		#endif
		#ifdef CONFIG_RTL8196C_REVISION_B
		#undef CONFIG_RTL8196C_REVISION_B
		#endif
	#else
		#include <platform.h>
		#include "../../../arch/mips/realtek/rtl8672/gpio.h"
	#endif

#else
#if !defined(CONFIG_NET_PCI) && defined(CONFIG_RTL8196B)
#include <asm/rtl865x/platform.h>
#endif

#if !defined(CONFIG_NET_PCI) && defined(CONFIG_RTL8196C)
#include <asm/rtl865x/platform.h>
#endif
#endif

#if defined(CONFIG_RTL_819X) && defined(__LINUX_2_6__)
#if !defined(USE_RLX_BSP)
#include <platform.h>
#else
#include <bsp/bspchip.h>
#endif
#endif

#ifndef REG32
	#define REG32(reg)	 	(*(volatile unsigned int *)(reg))
#endif


#ifdef CONFIG_RTL_92D_DMDP
void Sw_PCIE_Func(int func)
{
#if (RTL_USED_PCIE_SLOT==1)
	REG32(0xb8b2100c)=REG32(0xb8b2100c)|func; // switch to function #
#else
	REG32(0xb8b0100c)=REG32(0xb8b0100c)|func; // switch to function #
#endif
}
#endif

#if !defined(CONFIG_NET_PCI) && (defined(CONFIG_RTL8196B) || defined(CONFIG_RTL_819X))
#define MAX_PAYLOAD_SIZE_128B    0x00

#ifndef __ECOS
#if !(defined(CONFIG_RTL8196C) || defined(CONFIG_RTL_8196C) || defined(CONFIG_RTL_8196E))
int rtl8196b_pci_reset(unsigned long conf_addr)
{
   /* If PCI needs to be reset, put code here.
    * Note:
    *    Software may need to do hot reset for a period of time, say ~100us.
    *    Here we put 2ms.
    */
	//Modified for PCIE PHY parameter due to RD center suggestion by Jason 12252009
	WRITE_MEM32(0xb8000044, 0x9);//Enable PCIE PLL
	delay_ms(10);
	REG32(0xb8000010)=REG32(0xb8000010)|(0x500); //Active LX & PCIE Clock in 8196B system register
	delay_ms(10);
	WRITE_MEM32(0xb800003C, 0x1);//PORT0 PCIE PHY MDIO Reset
	delay_ms(10);
	WRITE_MEM32(0xb800003C, 0x3);//PORT0 PCIE PHY MDIO Reset
	delay_ms(10);
	WRITE_MEM32(0xb8000040, 0x1);//PORT1 PCIE PHY MDIO Reset
	delay_ms(10);
	WRITE_MEM32(0xb8000040, 0x3);//PORT1 PCIE PHY MDIO Reset
	delay_ms(10);
	WRITE_MEM32(0xb8b01008, 0x1);// PCIE PHY Reset Close:Port 0
	delay_ms(10);
	WRITE_MEM32(0xb8b01008, 0x81);// PCIE PHY Reset On:Port 0
	delay_ms(10);
#ifdef PIN_208
	WRITE_MEM32(0xb8b21008, 0x1);// PCIE PHY Reset Close:Port 1
	delay_ms(10);
	WRITE_MEM32(0xb8b21008, 0x81);// PCIE PHY Reset On:Port 1
	delay_ms(10);
#endif
#ifdef OUT_CYSTALL
	WRITE_MEM32(0xb8b01000, 0xcc011901);// PCIE PHY Reset On:Port 0
	delay_ms(10);
#ifdef PIN_208
	WRITE_MEM32(0xb8b21000, 0xcc011901);// PCIE PHY Reset On:Port 1
	delay_ms(10);
#endif
#endif
	REG32(0xb8000010)=REG32(0xb8000010)|(0x01000000); //PCIE PHY Reset On:Port 0
	delay_ms(10);

#if (defined(__LINUX_2_6__) && defined(USE_RLX_BSP)) || defined(__ECOS)
   WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) & 0xFFFFFF7F);
#ifdef PIN_208
   WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) & 0xFFFFFF7F);
#endif
   delay_ms(100);
   WRITE_MEM32(BSP_PCIE0_H_PWRCR, READ_MEM32(BSP_PCIE0_H_PWRCR) | 0x00000080);
#ifdef PIN_208
   WRITE_MEM32(BSP_PCIE1_H_PWRCR, READ_MEM32(BSP_PCIE1_H_PWRCR) | 0x00000080);
#endif
#else
   WRITE_MEM32(PCIE0_H_PWRCR, READ_MEM32(PCIE0_H_PWRCR) & 0xFFFFFF7F);
#ifdef PIN_208
   WRITE_MEM32(PCIE1_H_PWRCR, READ_MEM32(PCIE1_H_PWRCR) & 0xFFFFFF7F);
#endif
   delay_ms(100);
   WRITE_MEM32(PCIE0_H_PWRCR, READ_MEM32(PCIE0_H_PWRCR) | 0x00000080);
#ifdef PIN_208
   WRITE_MEM32(PCIE1_H_PWRCR, READ_MEM32(PCIE1_H_PWRCR) | 0x00000080);
#endif
#endif

   delay_ms(10);

	if ((READ_MEM32(0xb8b00728)&0x1f)!=0x11)
	{
		_DEBUG_INFO("PCIE LINK FAIL\n");
		return FAIL;
	}

   // Enable PCIE host
#if (defined(__LINUX_2_6__) && defined(USE_RLX_BSP)) || defined(__ECOS)
	WRITE_MEM32(BSP_PCIE0_H_CFG + 0x04, 0x00100007);
	WRITE_MEM8(BSP_PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#else
	WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
	WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#endif
	return SUCCESS;
}
#endif // !defined(CONFIG_NET_PCI) && (defined(CONFIG_RTL8196B) || defined(CONFIG_RTL_819X))
#endif
#endif


#if defined(CONFIG_RTL_8198) || defined(CONFIG_RTL8196C) || defined(CONFIG_RTL_8196C) || defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E) || defined(CONFIG_RTL_8198B)
#define MAX_PAYLOAD_SIZE_128B    0x00

#define CLK_MANAGE     0xb8000010
#define PCIE0_RC_EXT_BASE (0xb8b01000)
#define PCIE1_RC_EXT_BASE (0xb8b21000)
//RC Extended register
#define PCIE0_MDIO      (PCIE0_RC_EXT_BASE+0x00)
#define PCIE1_MDIO      (PCIE1_RC_EXT_BASE+0x00)
//MDIO
#define PCIE_MDIO_DATA_OFFSET (16)
#define PCIE_MDIO_DATA_MASK (0xffff <<PCIE_MDIO_DATA_OFFSET)
#define PCIE_MDIO_REG_OFFSET (8)
#define PCIE_MDIO_RDWR_OFFSET (0)
#if !defined(CONFIG_NET_PCI) &&  (defined(CONFIG_RTL_8198) || defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E))
#define PHY_EAT_40MHZ 1
#endif

#if !defined(CONFIG_NET_PCI) && !defined(CONFIG_PCI)
#if (defined(__LINUX_2_6__) && defined(USE_RLX_BSP)) || defined(__ECOS)
#define	PCIE0_H_CFG	BSP_PCIE0_H_CFG
#define	PCIE1_H_CFG	BSP_PCIE1_H_CFG
#endif

#define GPIO_BASE			0xB8003500
#define PEFGHCNR_REG		(0x01C + GPIO_BASE)     /* Port EFGH control */
#define PEFGHPTYPE_REG		(0x020 + GPIO_BASE)     /* Port EFGH type */
#define PEFGHDIR_REG		(0x024 + GPIO_BASE)     /* Port EFGH direction */
#define PEFGHDAT_REG		(0x028 + GPIO_BASE)     /* Port EFGH data */


void HostPCIe_SetPhyMdioWrite(unsigned int portnum, unsigned int regaddr, unsigned short val)
{
        unsigned int mdioaddr;
        volatile int i;
 
        if(portnum==0)          mdioaddr=PCIE0_MDIO;
        else if(portnum==1)     mdioaddr=PCIE1_MDIO;
        else return;
 
        REG32(mdioaddr)= ( (regaddr&0x1f)<<PCIE_MDIO_REG_OFFSET) | ((val&0xffff)<<PCIE_MDIO_DATA_OFFSET)  | (1<<PCIE_MDIO_RDWR_OFFSET) ;
        //delay
        for(i=0;i<5555;i++)  ;
	delay_ms(1);
}


#if  defined(CONFIG_RTL_8196CS) || defined(CONFIG_RTL_8197B)
static void GPIO6_PCIE_Device_PERST(void)

{

#if defined(CONFIG_RTL_8197B)
        REG32(0xb8000040)=REG32(0xb8000040)|0x00018;

        REG32(0xb8003500)=REG32(0xb8003500)&(~0x10);

        REG32(0xb8003508)= REG32(0xb8003508)|0x10;

        REG32(0xb800350c)= REG32(0xb800350c)|0x10;

        delay_ms(500);

        delay_ms(500);



        // 6. PCIE Device Reset

        //REG32(CLK_MANAGE) &= ~(1<<26);    //perst=0 off.

        REG32(0xb800350c)= REG32(0xb800350c)&(~0x10);

        delay_ms(500);   //PCIE standadrd: poweron: 100us, after poweron: 100ms

        delay_ms(500);

        REG32(0xb800350c)= REG32(0xb800350c)|0x10;
#else
        REG32(0xb8000040)=REG32(0xb8000040)|0x300000;

        REG32(0xb8003500)=REG32(0xb8003500)&(~0x40);

        REG32(0xb8003508)= REG32(0xb8003508)|0x40;

        REG32(0xb800350c)= REG32(0xb800350c)|0x40;

        delay_ms(500);

        delay_ms(500);



        // 6. PCIE Device Reset

        //REG32(CLK_MANAGE) &= ~(1<<26);    //perst=0 off.

        REG32(0xb800350c)= REG32(0xb800350c)&(~0x40);

        delay_ms(500);   //PCIE standadrd: poweron: 100us, after poweron: 100ms

        delay_ms(500);

        REG32(0xb800350c)= REG32(0xb800350c)|0x40;

        //      REG32(CLK_MANAGE) |=  (1<<26);   //PERST=1
#endif
}
#endif


#ifdef CONFIG_RTL_8196C_iNIC //mark_inic
static void iNIC_PCIE_Device_PERST(void)

{

        REG32(0xb8000040)=REG32(0xb8000040)|0x300000;

        REG32(0xb8003500)=REG32(0xb8003500)&(~0x40);

        REG32(0xb8003508)= REG32(0xb8003508)|0x40;

        REG32(0xb800350c)= REG32(0xb800350c)|0x40;

        delay_ms(500);

        delay_ms(500);



        // 6. PCIE Device Reset

        //REG32(CLK_MANAGE) &= ~(1<<26);    //perst=0 off.

        REG32(0xb800350c)= REG32(0xb800350c)&(~0x40);

        delay_ms(500);   //PCIE standadrd: poweron: 100us, after poweron: 100ms

        delay_ms(500);

        REG32(0xb800350c)= REG32(0xb800350c)|0x40;

        //      REG32(CLK_MANAGE) |=  (1<<26);   //PERST=1

}
#endif


#if defined(CONFIG_RTL_8198) || defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E) || defined(CONFIG_RTL_8198B)
static int at2_mode=0;
static void PCIE_Device_PERST(int portnum)
{
#if defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E)
	REG32(0xb8000010)|= (1<<12)|(1<<13)|(1<<19)|(1<<20)|(1<<18)|(1<<16);
#endif
	if (portnum==0)
	{
		REG32(CLK_MANAGE) &= ~(1<<26);    //perst=0 off.    
		delay_ms(500);   //PCIE standadrd: poweron: 100us, after poweron: 100ms
		delay_ms(500);  		
		REG32(CLK_MANAGE) |=  (1<<26);   //PERST=1
	}
	else if (portnum==1)
	{
	/*	PCIE Device Reset
	*	The pcei1 slot reset register depends on the hw
	*/

#if defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN) || (RTL_USED_PCIE_SLOT==1) || defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D) 
#if defined(CONFIG_RTL_8197B)
                GPIO6_PCIE_Device_PERST();
#else
#if defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E)

		REG32(0xb8000040) = (REG32(0xb8000040) & ~(7)) |(6);
							
                REG32(0xb8003500)=REG32(0xb8003500)&(~(1<<2));

                 REG32(0xb8003508)= REG32(0xb8003508)|(1<<2);




                REG32(0xb800350C) &= ~(1<<2);    //perst=0 off.
                delay_ms(300);   //PCIE standadrd: poweron: 100us, after poweron: 100ms
                delay_ms(300);

                REG32(0xb800350C) |=  (1<<2);   //PERST=1



		
#if defined(QA_BOARD)
		REG32(0xb8000040)=REG32(0xb8000040)|0x30000000;

		REG32(0xb8003500)=REG32(0xb8003500)&(~0x200000);
 
		 REG32(0xb8003508)= REG32(0xb8003508)|0x200000;




		REG32(0xb800350C) &= ~(0x200000);    //perst=0 off.  
		delay_ms(300);   //PCIE standadrd: poweron: 100us, after poweron: 100ms
		delay_ms(300); 

		REG32(0xb800350C) |=  (0x200000);   //PERST=1
#endif
#else
		REG32(PEFGHDAT_REG) &= ~(0x1000);    //perst=0 off.  
		delay_ms(300);   //PCIE standadrd: poweron: 100us, after poweron: 100ms
		delay_ms(300); 
		REG32(PEFGHDAT_REG) |=  (0x1000);   //PERST=1
#endif
#endif
#elif defined(CONFIG_RTL_92D_SUPPORT)
		REG32(CLK_MANAGE) &= ~(1<<26);    //perst=0 off.    
		delay_ms(500);   //PCIE standadrd: poweron: 100us, after poweron: 100ms
		delay_ms(500);  		
		REG32(CLK_MANAGE) |=  (1<<26);   //PERST=1
#endif
	}
	else
		return;
}


void PCIE_MDIO_Reset(unsigned int portnum)
{
        #define SYS_PCIE_PHY0   (0xb8000000 +0x50)
        #define SYS_PCIE_PHY1   (0xb8000000 +0x54)      
 
        unsigned int sys_pcie_phy;
 
        if(portnum==0)  sys_pcie_phy=SYS_PCIE_PHY0;
        else if(portnum==1)     sys_pcie_phy=SYS_PCIE_PHY1;
        else return;
 
       // 3.MDIO Reset
           REG32(sys_pcie_phy) = (1<<3) |(0<<1) | (0<<0);     //mdio reset=0,               
           REG32(sys_pcie_phy) = (1<<3) |(0<<1) | (1<<0);     //mdio reset=1,   
           REG32(sys_pcie_phy) = (1<<3) |(1<<1) | (1<<0);     //bit1 load_done=1
}


void PCIE_PHY_Reset(unsigned int portnum)
{
         #define PCIE_PHY0      0xb8b01008
         #define PCIE_PHY1      0xb8b21008
 
        unsigned int pcie_phy;
 
        if(portnum==0)  pcie_phy=BSP_PCIE0_H_PWRCR;
        else if(portnum==1)     pcie_phy=BSP_PCIE1_H_PWRCR;
        else return;
 
        //4. PCIE PHY Reset
	REG32(pcie_phy) = 0x01; //bit7:PHY reset=0   bit0: Enable LTSSM=1
	REG32(pcie_phy) = 0x81;   //bit7: PHY reset=1   bit0: Enable LTSSM=1
}


int PCIE_Check_Link(unsigned int portnum)
{
        unsigned int dbgaddr;
        unsigned int cfgaddr=0;
        int i=10;
 
        if(portnum==0)  dbgaddr=0xb8b00728;
        else if(portnum==1)     dbgaddr=0xb8b20728;
        else return 1;

 	
  //wait for LinkUP

        while(--i)
        {
              if( (REG32(dbgaddr)&0x1f)==0x11)
                        break;

                delay_ms(100); 
        }

        if(i==0)
        {       if(at2_mode==0)  //not auto test, show message
                printk("i=%x  Cannot LinkUP \n",i);
                return 0;
        }
        else
        {
                if(portnum==0) cfgaddr=0xb8b10000;
                else if(portnum==1) cfgaddr=0xb8b30000;
 
                if(at2_mode==0)
                printk("Find Port=%x Device:Vender ID=%x\n", portnum, REG32(cfgaddr) );
        }
        return 1;
}

#ifdef CONFIG_RTL_8198B
#define IP_Enable_Control_Register  0xb8000600 //page74
#define PCIE_Control_Register  0xb8000504 //page7

int PCIE_reset_procedure(int portnum, int Use_External_PCIE_CLK, int mdio_reset, unsigned long conf_addr)
{
	static int pcie_reset_done[RTL_MAX_PCIE_SLOT_NUM] = {0};
	int status=FAIL;
	
	if (pcie_reset_done[portnum]) 
	{
		printk("PCIE reset Already (%d) \n", pcie_reset_done[portnum]);
		return SUCCESS;	
	}

	printk("PCIE  %d reset (%d) \n", portnum,pcie_reset_done[portnum]);

	 if(portnum==0)
 		 REG32(IP_Enable_Control_Register) |= (1<<6) ; //Enable PCIE Port0 IP clock 
	 else if(portnum==1)     REG32(IP_Enable_Control_Register) |=  (1<<7);        //Enable PCIE Port1 IP clock 
 	 else return; 

      delay_ms(500);	

	 if(mdio_reset)
 	{
 		
  		 printk("Do MDIO_RESET\n");  
 
 		if(portnum==0)      REG32(PCIE_Control_Register) |=  (1<<24);        //Reset EPHY0
 		else if(portnum==1)     REG32(PCIE_Control_Register) |=  (1<<21);        //Reset EPHY1 
 		else return; 
  
 	}  
 
    delay_ms(500);
  //add compatible, slove sata pcie card.

	if((mdio_reset)&&(portnum==0))
    {
 
  		printk("\nSet PCIE P0 EPHY\n");
  		HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf848);  //25MHZ
  		HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0711);   //for sloving low performance
  		HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);  
  		HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766);   
  		HostPCIe_SetPhyMdioWrite(portnum, 0x1d, 0xa0eb); 
    }
 
    if((mdio_reset)&&(portnum==1))
    {
   		 printk("\nSet PCIE P1 EPHY\n");
  		HostPCIe_SetPhyMdioWrite(portnum, 4, 0xf56b);  //25MHZ
  		HostPCIe_SetPhyMdioWrite(portnum, 0x6, 0x5881);   //for sloving low performance
 		 HostPCIe_SetPhyMdioWrite(portnum, 0x8, 0x6c1c);  
  		HostPCIe_SetPhyMdioWrite(portnum, 0x9, 0x0fbf);   
  		HostPCIe_SetPhyMdioWrite(portnum, 0xb, 0x7bb0); 
    }

    // Step 4. PCIE Device Reset
    //   #if 1 
     //Pseudo code:{set 8198B PCIE Port0/1 GPIO reset here }
    //#endif
     PCIE_PHY_Reset(portnum);
	
     delay_ms(500);	
  
	 printk("\nPCIE_Check_Link\n");
    status=PCIE_Check_Link(portnum); 

   if(status==FAIL)
		return FAIL;

  //set BAR

   if (portnum==0)
	{
		// Enable PCIE host
		if (pcie_reset_done[portnum] == 0) {
#if defined(__LINUX_2_6__) && defined(USE_RLX_BSP)
		WRITE_MEM32(BSP_PCIE0_H_CFG + 0x04, 0x00100007);
		WRITE_MEM8(BSP_PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#else
			WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#endif
			pcie_reset_done[portnum] = 1;
		}
	}
	else if (portnum==1)
	{
		// Enable PCIE host
#if defined(__LINUX_2_6__) && defined(USE_RLX_BSP)
		if (pcie_reset_done[portnum] == 0) {
			WRITE_MEM32(BSP_PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(BSP_PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
			pcie_reset_done[portnum] = 1;
		}
		#else	/*	defined(__LINUX_2_6__) && defined(USE_RLX_BSP)	*/
			WRITE_MEM32(PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
		#endif	/*	defined(__LINUX_2_6__) && defined(USE_RLX_BSP)	*/
	}
	else
		return FAIL;
	
	delay_ms(500);

	return SUCCESS;
		
}
#else
int PCIE_reset_procedure(int portnum, int Use_External_PCIE_CLK, int mdio_reset, unsigned long conf_addr)
{
	static int pcie_reset_done[RTL_MAX_PCIE_SLOT_NUM] = {0};
	int status=FAIL;
	

	#if defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN) || (RTL_USED_PCIE_SLOT==1) || defined(CONFIG_RTL_DUAL_PCIESLOT_BIWLAN_D)
	if (portnum==0)
	{
		//REG32(CLK_MANAGE) |=  (1<<26);   //PERST=1  //Modified for PERST initial value to origianl GPIO setting low level.
	}
	else if (portnum==1)
	{
          #if defined(CONFIG_RTL_8197B)
               REG32(0xb8000040)|=0x18;
		REG32(0xb8003500) &= ~(0x10);	/*port Abit 4 */
		REG32(0xb8003508) |= (0x10);	/*port A bit 4 */
		REG32(0xb800350c) |=  (0x10);   //PERST=1

          #else
		REG32(0xb8000040)|=0x300;
		REG32(PEFGHCNR_REG) &= ~(0x1000);	/*port F bit 4 */
		REG32(PEFGHDIR_REG) |= (0x1000);	/*port F bit 4 */
		REG32(PEFGHDAT_REG) |=  (0x1000);   //PERST=1
          #endif
	}
	#endif

	if (pcie_reset_done[portnum]) 
		goto SET_BAR;

	printk("PCIE reset (%d) \n", pcie_reset_done[portnum]);
	if(portnum==0)		    REG32(CLK_MANAGE) |=  (1<<14);        //enable active_pcie0
	else if(portnum==1)	    REG32(CLK_MANAGE) |=  (1<<16);        //enable active_pcie1	
	else return 0;

	delay_ms(500);

	#ifdef CONFIG_RTL8198_REVISION_B
	if(portnum==1)
	{
		#define PAD_CONTROL 0xb8000048
		REG32(PAD_CONTROL)|=(1<<27);
	}	
	#endif 
	delay_ms(500);


	if(mdio_reset)
	{
		if(at2_mode==0)  //no auto test, show message
		printk("Do MDIO_RESET\n");

		// 3.MDIO Reset
		PCIE_MDIO_Reset(portnum);
	}  

	/*	
	PCIE_PHY_Reset(portnum);	
	*/	
	delay_ms(500);
	delay_ms(500);

	//----------------------------------------
	if(mdio_reset)
	{
		//fix 8198 test chip pcie tx problem.	
		#if defined(CONFIG_RTL8198_REVISION_B) || defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E)

		#if defined(CONFIG_RTL_8196E)
		if ((REG32(BSP_REVR) & 0xFFFFF000) == BSP_RTL8196E)
		#else		
		if ((REG32(BSP_REVR) >= BSP_RTL8198_REVISION_B) || ((REG32(BSP_REVR) & 0xFFFFF000) == BSP_RTL8197D)) 
		#endif
		{
			HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD086);  //bokai tell, and fix

			HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
			HostPCIe_SetPhyMdioWrite(portnum, 2, 0x4d19);   ///1119 bokai
			#if  CONFIG_PHY_EAT_40MHZ
				HostPCIe_SetPhyMdioWrite(portnum, 4, 0x7C00);
			#else
				HostPCIe_SetPhyMdioWrite(portnum, 4, 0x7000);
			#endif
			#if defined(CONFIG_AUTO_PCIE_PHY_SCAN) && (defined(CONFIG_RTL_8196E) || defined(CONFIG_RTL_819XD))
			
				if ((REG32(0xb8000008)&0x2000000)==0x2000000)  //40MHz
				{
					HostPCIe_SetPhyMdioWrite(portnum, 4, 0x7C00);
					HostPCIe_SetPhyMdioWrite(portnum, 5, 0x09DB);   //40M  //1119 bokai
					HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf048);   //40M
					HostPCIe_SetPhyMdioWrite(portnum, 7, 0x41ff);
					HostPCIe_SetPhyMdioWrite(portnum, 8, 0x13F6); 
				}
				else //25MHz
				{
					printk("98 - 25MHz Clock Source\n");
					HostPCIe_SetPhyMdioWrite(portnum, 4, 0x7000);
					HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0B13); 
					HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf048);  //25M
					HostPCIe_SetPhyMdioWrite(portnum, 7, 0xa7ff);  //-0.5%
					HostPCIe_SetPhyMdioWrite(portnum, 8, 0x0c56);  
				
				}
			#else

			#if  CONFIG_PHY_EAT_40MHZ
			printk("98 - 40MHz Clock Source\n");
			HostPCIe_SetPhyMdioWrite(portnum, 5, 0x09DB);   //40M  //1119 bokai
			HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf048);   //40M

			//HostPCIe_SetPhyMdioWrite(portnum, 5, 0x08db);   //40M
			//HostPCIe_SetPhyMdioWrite(portnum, 6, 0xF148);  //40M
			#else
			printk("98 - 25MHz Clock Source\n");
			HostPCIe_SetPhyMdioWrite(portnum, 5, 0x0B13); 
			HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf048);  //25M
			#endif
			#endif
			
			
			#if  CONFIG_PHY_EAT_40MHZ
			HostPCIe_SetPhyMdioWrite(portnum, 7, 0x41ff);
			#else
			HostPCIe_SetPhyMdioWrite(portnum, 7, 0xa7ff);  //-0.5%
			#endif
			
#if defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E)
		#if  CONFIG_PHY_EAT_40MHZ
			 HostPCIe_SetPhyMdioWrite(portnum, 8, 0x13F6); 			
		#else	
			HostPCIe_SetPhyMdioWrite(portnum, 8, 0x0c56);  //peisi tune  //@@@@@@-->7 jasonwang 0902
		#endif
#else
			HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d7);  //peisi tune
#endif
			//saving more power, 8196c pe-si tune
			HostPCIe_SetPhyMdioWrite(portnum, 0x09, 0x539c); 	
			HostPCIe_SetPhyMdioWrite(portnum, 0x0a, 0x20eb); 	
			HostPCIe_SetPhyMdioWrite(portnum, 0x0d, 0x1766); 			
#if defined(CONFIG_RTL_819XD) || defined(CONFIG_RTL_8196E)
			HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0711);   //for sloving low performance
#else
			HostPCIe_SetPhyMdioWrite(portnum, 0x0b, 0x0511);   //for sloving low performance
#endif

#if defined(CONFIG_RTL_8196E)
			HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0f0f);
#else
			HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0a00);
#endif
			HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0);

			HostPCIe_SetPhyMdioWrite(portnum, 0x1a, 0x7e40);   //formal chip, reg 0x1a.4=0
			HostPCIe_SetPhyMdioWrite(portnum, 0x1b, 0xFC01);   //formal chip	 reg 0x1b.0=1		

			HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);	
		}
		else
		#endif
		{
			HostPCIe_SetPhyMdioWrite(portnum, 0, 0xD087);

			HostPCIe_SetPhyMdioWrite(portnum, 1, 0x0003);
			HostPCIe_SetPhyMdioWrite(portnum, 6, 0xf448); //new
			HostPCIe_SetPhyMdioWrite(portnum, 6, 0x408); 	//avoid noise infuse	 //15-12=0, 7-5=0,    0448

			HostPCIe_SetPhyMdioWrite(portnum, 7, 0x31ff);
			HostPCIe_SetPhyMdioWrite(portnum, 8, 0x18d5);  //new		
			HostPCIe_SetPhyMdioWrite(portnum, 9, 0x531c); 		
		
			HostPCIe_SetPhyMdioWrite(portnum, 0xd, 0x1766); 
			HostPCIe_SetPhyMdioWrite(portnum, 0xf, 0x0010);//ori				

			HostPCIe_SetPhyMdioWrite(portnum, 0x19, 0xFCE0); 
			HostPCIe_SetPhyMdioWrite(portnum, 0x1e, 0xC280);	
		}
	}

	//---------------------------------------
	PCIE_Device_PERST(portnum);
	PCIE_PHY_Reset(portnum);

#ifdef CONFIG_RTL_ULINKER
	{
		extern void eth_led_recover(void);
		eth_led_recover();
	}
#endif

	delay_ms(500);
	delay_ms(500);
	status=PCIE_Check_Link(portnum); 
	if(status==FAIL)
		return FAIL;
		

SET_BAR:
	if (portnum==0)
	{
		// Enable PCIE host
		if (pcie_reset_done[portnum] == 0) {
#if (defined(__LINUX_2_6__) && defined(USE_RLX_BSP)) || defined(__ECOS)
		WRITE_MEM32(BSP_PCIE0_H_CFG + 0x04, 0x00100007);
		WRITE_MEM8(BSP_PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#else
			WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#endif
			pcie_reset_done[portnum] = 1;
		}
#ifdef CONFIG_RTL_92D_DMDP		
		else {
			Sw_PCIE_Func(1);
			//choose the PCIE port number 
			WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
			Sw_PCIE_Func(0);
		}
#endif
	}
	else if (portnum==1)
	{
		// Enable PCIE host
#if (defined(__LINUX_2_6__) && defined(USE_RLX_BSP))  || defined(__ECOS)
		if (pcie_reset_done[portnum] == 0) {
			WRITE_MEM32(BSP_PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(BSP_PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
			pcie_reset_done[portnum] = 1;
		}
		#ifdef CONFIG_RTL_92D_DMDP
		else {
			Sw_PCIE_Func(1);
			//choose the PCIE port number 
			WRITE_MEM32(BSP_PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(BSP_PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
			Sw_PCIE_Func(0);
		}
		#endif
		#else	/*	defined(__LINUX_2_6__) && defined(USE_RLX_BSP)	*/
			WRITE_MEM32(PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
		#endif	/*	defined(__LINUX_2_6__) && defined(USE_RLX_BSP)	*/
	}
	else
		return FAIL;
	
	delay_ms(500);
	return SUCCESS;

}
#endif
#elif defined(CONFIG_RTL8196C) || defined(CONFIG_RTL_8196C)


static int pcie_reset_done = 0;
#ifdef CONFIG_RTL8672
#ifdef USE_RLX_BSP
#define PCI_MISC		BSP_PCI_MISC
#define MISC_IP_SEL		BSP_IP_SEL
	#define EN_PCIE			BSP_EN_PCIE
#define PCI_MISC		BSP_PCI_MISC
#define PCIE0_H_PWRCR	BSP_PCIE0_H_PWRCR
#define MISC_PINSR		BSP_MISC_PINSR
	#define CLKSEL			BSP_CLKSEL
#define PCIE0_H_CFG		BSP_PCIE0_H_CFG
#endif //USE_RLX_BSP

unsigned char clk_src_40M = 0;

struct pcie_para{
	unsigned char port;
	unsigned char reg;	
	unsigned short value;
};

enum clk_source{
	CLK35_328_6166 = 0,		//6166 35.328M clk
	CLK25_6166,				//6166 25M clk
	CLK35_328_8676,			//8676 35.328M clk
	CLK40_8676,				//8676 40M clk
	CLK40_8686,				//8686 40M clk
	CLK25_8686,                      //8686 25M clk
	NOT_DEFINED_CLK
};

struct pcie_para ePHY[][29] = {
     { {0, 1, 0x0003},   	{0, 2, 0x2d18}, 	{0, 3, 0x6d09},  	{0, 4, 0x5000},   
	{0, 0, 0x1046},		{0, 6, 0x0068}, 	{0, 5, 0x0bcb}, 	{0, 7, 0x30ff},   
	{0, 8, 0x18d7},		{0, 9, 0x530c}, 	{0, 0xa, 0x00e8},	{0, 0xb, 0x0511}, 
	{0, 0xc, 0x0828}, 	{0, 0xd, 0x17a6},	{0, 0xe, 0x98c5},	{0, 0xf, 0x0f0f}, 
	{0, 0x10, 0x000c},	{0, 0x11, 0x3c00},	{0, 0x12, 0xfc00},	{0, 0x13, 0x0c81},
	{0, 0x14, 0xde01},	{0, 0x19, 0xfc20},	{0, 0x1a, 0xfc00},	{0, 0x1b, 0xfc00},
	{0, 0x1c, 0xfc00},	{0, 0x1d, 0xa0eb},	{0, 0x1e, 0xc280},	{0, 0x1f, 0x05e0},
	{0xff,0xff,0xffff}},  //6166 35.328M clk
     {	{0, 1, 0x0003},		{0, 2, 0x2d18},		{0, 3, 0x6d09},		{0, 4, 0x5000},   
	{0, 0, 0x1047},		{0, 6, 0xf848},		{0, 5, 0x08ab},		{0, 7, 0x30ff},   
	{0, 8, 0x18d7},   	{0, 9, 0x530c},		{0, 0xa, 0x00e8},	{0, 0xb, 0x0511}, 
	{0, 0xc, 0x0828}, 	{0, 0xd, 0x17a6}, 	{0, 0xe, 0x98c5}, 	{0, 0xf, 0x0f0f}, 
	{0, 0x10, 0x000c},	{0, 0x11, 0x3c00},	{0, 0x12, 0xfc00},	{0, 0x13, 0x0c81},
	{0, 0x14, 0xde01},	{0, 0x19, 0xfc20},	{0, 0x1a, 0xfc00},	{0, 0x1b, 0xfc00},
	{0, 0x1c, 0xfc00},	{0, 0x1d, 0xa0eb},	{0, 0x1e, 0xc280},	{0, 0x1f, 0x05e0},
	{0xff,0xff,0xffff}}, //6166 25M clk
     {	{0, 1, 0x0003}, 	{0, 2, 0x2d18},		{0, 3, 0x4d09},		{0, 4, 0x5c3f},   
	{0, 0, 0x1046},   	{0, 6, 0x9048},		{0, 5, 0x2213},		{0, 7, 0x31ff},   
	{0, 8, 0x18d7},   	{0, 9, 0x539c},  	{0, 0xa, 0x00e8}, 	{0, 0xb, 0x0711}, 
	{0, 0xc, 0x0828}, 	{0, 0xd, 0x17a6},	{0, 0xe, 0x98c5},	{0, 0xf, 0x0f0f}, 
	{0, 0x10, 0x000c},	{0, 0x11, 0x3c00},	{0, 0x12, 0xfc00},	{0, 0x13, 0x0c81},
	{0, 0x14, 0xde01},	{0, 0x19, 0xfce0},	{0, 0x1a, 0x7c00},	{0, 0x1b, 0xfc00},
	{0, 0x1c, 0xfc00},	{0, 0x1d, 0xa0eb},	{0, 0x1e, 0xc280},	{0, 0x1f, 0x0600},
	{0xff,0xff,0xffff}}, //8676 35.328M clk
	 {	{0, 1, 0x0003}, 	{0, 2, 0x2d18},		{0, 3, 0x4d09},		{0, 4, 0x5000},   
	{0, 0, 0x1047},   	{0, 6, 0x9148},		{0, 5, 0x23cb},		{0, 7, 0x31ff},   
	{0, 8, 0x18d7},   	{0, 9, 0x539c},  	{0, 0xa, 0x00e8}, 	{0, 0xb, 0x0711}, 
	{0, 0xc, 0x0828}, 	{0, 0xd, 0x17a6},	{0, 0xe, 0x98c5},	{0, 0xf, 0x0f0f}, 
	{0, 0x10, 0x000c},	{0, 0x11, 0x3c00},	{0, 0x12, 0xfc00},	{0, 0x13, 0x0c81},
	{0, 0x14, 0xde01},	{0, 0x19, 0xfce0},	{0, 0x1a, 0x7c00},	{0, 0x1b, 0xfc00},
	{0, 0x1c, 0xfc00},	{0, 0x1d, 0xa0eb},	{0, 0x1e, 0xc280},	{0, 0x1f, 0x0600},
	{0xff,0xff,0xffff}}, //8676 40M clk
	{	{0, 0, 0x1086}, 	{0, 4, 0x5800},		{0, 5, 0x05d3},		{0, 6, 0xf048},   
	{0, 0x0d, 0x1766},   	{0, 0x0f, 0x0a00},		{0, 0x01d, 0xa0eb},
	{0xff,0xff,0xffff}},//8686 40M clk
	{	{0, 6, 0xf848},   {0, 0x0b, 0x0711}, {0, 0x0d, 0x1766},   	{0, 0x0f, 0x0a00}, 
		{0, 0x01d, 0xa0eb},
	{0xff,0xff,0xffff}}//8686 25M clk
};

int PCIE_reset_procedure(int PCIE_Port0and1_8196B_208pin, int Use_External_PCIE_CLK, int mdio_reset,unsigned long conf_addr)
{
	extern void PCIE_reset_pin(int *reset);
	int PCIE_gpio_RST,i, idx;

	if (pcie_reset_done) 
		goto SET_BAR;

	PCIE_reset_pin(&PCIE_gpio_RST);

	//0. Assert PCIE Device Reset
	gpioClear(PCIE_gpio_RST);
	gpioConfig(PCIE_gpio_RST, GPIO_FUNC_OUTPUT);
	delay_ms(10);

	//1. PCIE phy mdio reset
	REG32(PCI_MISC) = BSP_PCI_MDIO_RESET_ASSERT;
	REG32(PCI_MISC) = BSP_PCI_MDIO_RESET_RELEASE;

	//2. PCIE MAC reset
	REG32(MISC_IP_SEL) &= ~EN_PCIE;
	REG32(MISC_IP_SEL) |= EN_PCIE;

	if(mdio_reset)
	{
		//printk("Do MDIO_RESET\n");
		// 5.MDIO Reset
		REG32(PCI_MISC) = BSP_PCI_MDIO_RESET_RELEASE;
	}
	//6. PCIE PHY Reset
	REG32(PCIE0_H_PWRCR) = 0x1; //bit7 PHY reset=0   bit0 Enable LTSSM=1
	REG32(PCIE0_H_PWRCR) = 0x81;   //bit7 PHY reset=1   bit0 Enable LTSSM=1
	delay_ms(100);

	//----------------------------------------
	if (mdio_reset)
	{
		if (IS_6166 && (REG32(MISC_PINSR) & CLKSEL))
			idx = CLK35_328_6166;
		else if (IS_6166 && !(REG32(MISC_PINSR) & CLKSEL))
			idx = CLK25_6166;
		else if (IS_RTL8676 && !(REG32(MISC_PINSR) & CLKSEL))
			idx = CLK35_328_8676;
		else if (IS_RTL8676 && (REG32(MISC_PINSR) & CLKSEL))
			idx = CLK40_8676;
		else if (IS_RTL8686 && (REG32(MISC_PINSR) & CLKSEL)){
			printk("8686 40Mhz\n");
			idx = CLK40_8686;
		}
		else if(IS_RTL8686 && !(REG32(MISC_PINSR) & CLKSEL)){
			printk("8686 25Mhz\n");
			idx = CLK25_8686;
		}
		else
			idx = NOT_DEFINED_CLK;

		if (CLK40_8676 == idx)
			clk_src_40M = 1;

		for (i = 0; NOT_DEFINED_CLK != idx; ) {
			if(ePHY[idx][i].port != 0xff){
				HostPCIe_SetPhyMdioWrite(ePHY[idx][i].port, ePHY[idx][i].reg, ePHY[idx][i].value);
				i++;
			}
			else
				break;
		}
	}

	// 7. PCIE Device Reset
	gpioSet(PCIE_gpio_RST);

	//4. PCIE PHY Reset
	REG32(PCIE0_H_PWRCR) = 0x1; //bit7 PHY reset=0   bit0 Enable LTSSM=1
	REG32(PCIE0_H_PWRCR) = 0x81;   //bit7 PHY reset=1   bit0 Enable LTSSM=1
	delay_ms(100);

	//8. Set BAR
	REG32(0xb8b10010) = 0x18c00001;
	REG32(0xb8b10018) = 0x19000004;
	REG32(0xb8b10004) = 0x00180007;
	REG32(0xb8b00004) = 0x00100007;

	//wait for LinkUP
	i = 100;
	while(--i)
	{
		if( (REG32(0xb8b00728)&0x1f)==0x11)
			break;
		delay_ms(100);
	}
	if(i==0)
	{
		printk("Cannot LinkUP (0x%08X)\n", REG32(0xb8b00728));
		return FAIL;
	}

SET_BAR:
	// Enable PCIE host
	if (pcie_reset_done == 0) {
		WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
		WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
		set_rtl8192cd_gpio();
		pcie_reset_done = 1;
	}
#ifdef CONFIG_RTL_92D_DMDP
	else {
		Sw_PCIE_Func(1);	//choose the PCIE port number 
		WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
		WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);
		Sw_PCIE_Func(0);
	}
#endif
	return SUCCESS;
}


#else	

int PCIE_reset_procedure(int PCIE_Port0and1_8196B_208pin, int Use_External_PCIE_CLK, int mdio_reset,unsigned long conf_addr)
{
	
	int i=100;
#define SYS_PCIE_PHY0   (0xb8000000 +0x50)
	//PCIE Register
#define CLK_MANAGE  0xb8000010
#define PCIE_PHY0_REG  0xb8b01000
	//#define PCIE_PHY1_REG  0xb8b21000
#define PCIE_PHY0  0xb8b01008
	// #define PCIE_PHY1  0xb8b21008
	int port =0;

	if (pcie_reset_done) 
		goto SET_BAR;

	//2.Active LX & PCIE Clock
    REG32(CLK_MANAGE) |=  (1<<11);        //enable active_pcie0
    delay_ms(100);

#if 1
	if(mdio_reset)
	{
		//printk("Do MDIO_RESET\n");
		// 3.MDIO Reset
		REG32(SYS_PCIE_PHY0) = (1<<3) |(0<<1) | (0<<0);     //mdio reset=0,
		REG32(SYS_PCIE_PHY0) = (1<<3) |(0<<1) | (1<<0);     //mdio reset=1,
		REG32(SYS_PCIE_PHY0) = (1<<3) |(1<<1) | (1<<0);     //bit1 load_done=1
	}
	//4. PCIE PHY Reset
	REG32(PCIE_PHY0) = 0x1; //bit7 PHY reset=0   bit0 Enable LTSSM=1
	REG32(PCIE_PHY0) = 0x81;   //bit7 PHY reset=1   bit0 Enable LTSSM=1
	delay_ms(100);
#endif

	delay_ms(100);

   //----------------------------------------
   if(mdio_reset)
	{
		if (REG32(REVR) == RTL8196C_REVISION_A)
		{
		HostPCIe_SetPhyMdioWrite(port, 0, 0x5027);
		HostPCIe_SetPhyMdioWrite(port, 2, 0x6d18);
		HostPCIe_SetPhyMdioWrite(port, 6, 0x8828);
		HostPCIe_SetPhyMdioWrite(port, 7, 0x30ff);
		HostPCIe_SetPhyMdioWrite(port, 8, 0x18d7);
		HostPCIe_SetPhyMdioWrite(port, 0xa, 0xe9);
		HostPCIe_SetPhyMdioWrite(port, 0xb, 0x0511);
		HostPCIe_SetPhyMdioWrite(port, 0xd, 0x15b6);
		HostPCIe_SetPhyMdioWrite(port, 0xf, 0x0f0f);
#if 1 // PHY_EAT_40MHZ
		HostPCIe_SetPhyMdioWrite(port, 5, 0xbcb);    //[9:3]=1111001 (binary)   121 (10)
		HostPCIe_SetPhyMdioWrite(port, 6, 0x8128);  //[11]=0   [9:8]=01
#endif
		/*
		emdiow 0 5027
		emdiow 2 6d18
		emdiow 6 8828
		emdiow 7 30ff
		emdiow 8 18dd
		emdiow a e9
		emdiow b 0511
		emdiow d 15b6
		emdiow f 0f0f
		*/
		}
		else
		{
				HostPCIe_SetPhyMdioWrite(port, 0, 0xD087);
		HostPCIe_SetPhyMdioWrite(port, 1, 0x0003);
		HostPCIe_SetPhyMdioWrite(port, 2, 0x4d18);

#ifdef CONFIG_PHY_EAT_40MHZ

		printk("96C - 40MHz Clock Source\n");
#ifdef HIGH_POWER_EXT_PA
		HostPCIe_SetPhyMdioWrite(port, 5, 0x0BF3);   //40M
#else
		HostPCIe_SetPhyMdioWrite(port, 5, 0x0BCB);   //40M
#endif
		HostPCIe_SetPhyMdioWrite(port, 6, 0xF148);  //40M

#else

		printk("96C - 25MHz Clock Source\n");
		HostPCIe_SetPhyMdioWrite(port, 6, 0xf848);  //25M
#endif

		HostPCIe_SetPhyMdioWrite(port, 7, 0x31ff);
		HostPCIe_SetPhyMdioWrite(port, 8, 0x18d7);
		HostPCIe_SetPhyMdioWrite(port, 9, 0x539c);
		HostPCIe_SetPhyMdioWrite(port, 0xa, 0x20eb);
		HostPCIe_SetPhyMdioWrite(port, 0xb, 0x0511);
		HostPCIe_SetPhyMdioWrite(port, 0xd, 0x1764);
		HostPCIe_SetPhyMdioWrite(port, 0xf, 0x0a00);

#ifdef HAVING_FIB
		HostPCIe_SetPhyMdioWrite(port,8, 0x18dd);
		HostPCIe_SetPhyMdioWrite(port, 0xd, 0x1776);
#endif

		HostPCIe_SetPhyMdioWrite(port, 0x19, 0xFCE0);
		HostPCIe_SetPhyMdioWrite(port, 0x1e, 0xC280);
		}
	}

	//---------------------------------------
	// 6. PCIE Device Reset
#ifndef CONFIG_RTL_8196C_iNIC
	REG32(CLK_MANAGE) &= ~(1<<12);    //perst=0 off.
	delay_ms(300);
#endif
        //mark_inic , from jason patch
#ifdef CONFIG_RTL_8196C_iNIC
        iNIC_PCIE_Device_PERST();
#endif
#if  defined(CONFIG_RTL_8196CS) || defined(CONFIG_RTL_8197B)
	GPIO6_PCIE_Device_PERST();
#endif
	//4. PCIE PHY Reset
	REG32(PCIE_PHY0) = 0x1; //bit7 PHY reset=0   bit0 Enable LTSSM=1
	REG32(PCIE_PHY0) = 0x81;   //bit7 PHY reset=1   bit0 Enable LTSSM=1
	delay_ms(300);
#ifndef CONFIG_RTL_8196C_iNIC
        REG32(CLK_MANAGE) |=  (1<<12);   //PERST=1
#endif
	//4. PCIE PHY Reset

	//prom_printf("\nCLK_MANAGE(0x%x)=0x%x\n\n",CLK_MANAGE,READ_MEM32(CLK_MANAGE));
	delay_ms(100);
#if 1  //wait for LinkUP
	while(--i)
	{
		if( (REG32(0xb8b00728)&0x1f)==0x11)
		break;
		delay_ms(100);
	}
	if(i==0)
	{
		printk("i=%x Cannot LinkUP \n",i);
		return FAIL;
	}
#endif
	
SET_BAR:
	if (port==0)
	{
	// Enable PCIE host
		if (pcie_reset_done == 0) {
#if defined(__LINUX_2_6__) && defined(USE_RLX_BSP)
			WRITE_MEM32(BSP_PCIE0_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(BSP_PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B			
#else
			WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#endif
			pcie_reset_done = 1;
		}
#ifdef CONFIG_RTL_92D_DMDP		
		else {
			Sw_PCIE_Func(1);
			//choose the PCIE port number 
#if defined(__LINUX_2_6__) && defined(USE_RLX_BSP)
			WRITE_MEM32(BSP_PCIE0_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(BSP_PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#else
			WRITE_MEM32(PCIE0_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE0_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#endif
			Sw_PCIE_Func(0);
		}
#endif
	}
	else if (port==1)
	{
		// Enable PCIE host
		if (pcie_reset_done == 0) {
#if defined(__LINUX_2_6__) && defined(USE_RLX_BSP)
			WRITE_MEM32(BSP_PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(BSP_PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#else
			WRITE_MEM32(PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#endif
			pcie_reset_done = 1;
		}
#ifdef CONFIG_RTL_92D_DMDP
		else {
			Sw_PCIE_Func(1);
#if defined(__LINUX_2_6__) && defined(USE_RLX_BSP)
			//choose the PCIE port number 
			WRITE_MEM32(BSP_PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(BSP_PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#else
			WRITE_MEM32(PCIE1_H_CFG + 0x04, 0x00100007);
			WRITE_MEM8(PCIE1_H_CFG + 0x78, (READ_MEM8(conf_addr + 0x78) & (~0xE0)) | MAX_PAYLOAD_SIZE_128B);  // Set MAX_PAYLOAD_SIZE to 128B
#endif
			Sw_PCIE_Func(0);
		}
#endif
	}
	else
		return FAIL;
	return SUCCESS;
}

#endif	


void HostPCIe_Close(void)
{
	REG32(0xb8b10044) &= (~(3));
	REG32(0xb8b10044) |= (3);
	HostPCIe_SetPhyMdioWrite(0, 0xf, 0x0708);	
	 //.DeActive LX & PCIE Clock
#ifdef CONFIG_RTL8672
	REG32(MISC_IP_SEL) &= ~EN_PCIE;        //enable active_pcie0
#else
	REG32(CLK_MANAGE) &=(0xFFFFFFFF-  (1<<11));        //enable active_pcie0
#endif
	pcie_reset_done=0;
}
#endif	/*	#elif (defined(CONFIG_RTL8196C) || defined(CONFIG_RTL_8196C))	*/

#endif	/*	!defined(CONFIG_NET_PCI)	*/
#endif


#ifdef CONFIG_RTL8671
/*6/7/04 hrchen, invalidate the dcache with a 0->1 transition*/

#ifdef CONFIG_CPU_RLX4181
int r3k_flush_dcache_range(int a, int b)
{
  int garbage_tmp;
	__asm__ __volatile__(
                ".set\tnoreorder\n\t"
                ".set\tnoat\n\t"
		"mfc0 %0, $20\n\t"
		"nop\n\t"
		"nop\n\t"
		"andi %0, 0xFDFF\n\t"
		"mtc0 %0, $20\n\t"
		"nop\n\t"
		"nop\n\t"
		"ori %0, 0x200\n\t"
		"mtc0 %0, $20\n\t"
		"nop\n\t"
		"nop\n\t"
                ".set\tat\n\t"
                ".set\treorder"
                : "=r" (garbage_tmp));
        return 0;
}
#else
int r3k_flush_dcache_range(int a, int b)
{
  int garbage_tmp;
	__asm__ __volatile__(
                ".set\tnoreorder\n\t"
                ".set\tnoat\n\t"
		"mfc0 %0, $20\n\t"
		"nop\n\t"
		"nop\n\t"
		"andi %0, 0xFFFE\n\t"
		"mtc0 %0, $20\n\t"
		"nop\n\t"
		"nop\n\t"
		"ori %0, 1\n\t"
		"mtc0 %0, $20\n\t"
		"nop\n\t"
		"nop\n\t"
                ".set\tat\n\t"
                ".set\treorder"
                : "=r" (garbage_tmp));
        return 0;
}
#endif

#ifdef _USE_DRAM_
//init DRAM
void r3k_enable_DRAM(void)
{
  int tmp, tmp1;
	//--- initialize and start COP3
	__asm__ __volatile__(
                ".set\tnoreorder\n\t"
                ".set\tnoat\n\t"
		"mfc0	%0,$12\n\t"
		"nop\n\t"
		"lui	%1,0x8000\n\t"
		"or	%1,%0\n\t"
		"mtc0	%1,$12\n\t"
		"nop\n\t"
		"nop\n\t"
                ".set\tat\n\t"
                ".set\treorder"
		: "=r" (tmp), "=r" (tmp1));

	//set base
	__asm__ __volatile__(
                ".set\tnoreorder\n\t"
                ".set\tnoat\n\t"
	 	"mtc3 %0, $4	# $4: d-ram base\n\t"
 	 	"nop\n\t"
	 	"nop\n\t"
                ".set\tat\n\t"
                ".set\treorder"
		:
		: "r" (DRAM_START_ADDR&0x0fffffff));

	//set size
	__asm__ __volatile__(
                ".set\tnoreorder\n\t"
                ".set\tnoat\n\t"
	 	"mtc3 %0, $5    # $5: d-ram top\n\t"
	 	"nop\n\t"
	 	"nop\n\t"
                ".set\tat\n\t"
                ".set\treorder"
		:
		: "r" (R3K_DRAM_SIZE-1));

	//clear DRAM
	__asm__ __volatile__(
"1:\n\t"
	 	"sw	$0,0(%1)\n\t"
	 	"addiu	%1,4\n\t"
	 	"bne	%0,%1,1b\n\t"
	 	"nop\n\t"
                ".set\tat\n\t"
                ".set\treorder"
                :
                : "r" (DRAM_START_ADDR+R3K_DRAM_SIZE), "r" (DRAM_START_ADDR));
}
#endif // _USE_DRAM_
#endif // CONFIG_RTL8671