path: root/target/linux/realtek/files/arch/rlx/bsp/vmlinux.lds.S

#include <asm/asm-offsets.h>
#include <asm-generic/vmlinux.lds.h>

#undef mips
#define mips mips
OUTPUT_ARCH(mips)
ENTRY(kernel_entry)
PHDRS {
	text PT_LOAD FLAGS(7);	/* RWX */
	note PT_NOTE FLAGS(4);	/* R__ */
}
jiffies = JIFFIES;

SECTIONS
{
	. = LOADADDR;
	/* read-only */
	_text = .;	/* Text and read-only data */
	.text : {
		TEXT_TEXT
		SCHED_TEXT
		LOCK_TEXT
		KPROBES_TEXT
		*(.text.*)
		*(.fixup)
		*(.gnu.warning)
/*#ifdef CONFIG_RTL8192SE*/
#if 1
		/* start of wlan f/w definition */
		__fw_start = . ;
		*(.rtl8192sfw.bin)
		__fw_end = . ;

		__AGC_TAB_start = . ;
		*(.AGC_TAB.txt)
		__AGC_TAB_end = . ;

		__phy_reg_start = . ;
		*(.phy_reg.txt)
		__phy_reg_end = . ;

		__phy_reg_MP_start = . ;
		*(.phy_reg_MP.txt)
		__phy_reg_MP_end = . ;

		__MACPHY_REG_start = . ;
		*(.MACPHY_REG.txt)
		__MACPHY_REG_end = . ;

		__radio_a_start = . ;
		*(.radio_a.txt)
		__radio_a_end = . ;                                                       

		__radio_b_start = . ;
		*(.radio_b.txt)
		__radio_b_end = . ;

		__PHY_REG_PG_start = .;
		*(.PHY_REG_PG.txt)
		__PHY_REG_PG_end = .;

		__PHY_to1T2R_start = .;
		*(.PHY_to1T2R.txt)
		__PHY_to1T2R_end = .;

		__PHY_to1T2R_b_start = .;
		*(.PHY_to1T2R_b.txt)
		__PHY_to1T2R_b_end = .;

		__PHY_to1T1R_start = .;
		*(.PHY_to1T1R.txt)
		__PHY_to1T1R_end = .;

		__PHY_to1T1R_b_start = .;
		*(.PHY_to1T1R_b.txt)
		__PHY_to1T1R_b_end = .;

		__radio_a_hp_start = . ;
		*(.radio_a_hp.txt)
		__radio_a_hp_end = . ;

		/* end of wlan f/w definition */
#endif

	} :text = 0
	_etext = .;	/* End of text section */

	/* Exception table */
	. = ALIGN(16);
	__ex_table : {
		__start___ex_table = .;
		*(__ex_table)
		__stop___ex_table = .;
	}

	/* Exception table for data bus errors */
	__dbe_table : {
		__start___dbe_table = .;
		*(__dbe_table)
		__stop___dbe_table = .;
	}

   	. = ALIGN(16384);
   	__iram = . ;
   	.iram        :
   	{
		*(.iram-gen)		/* general usage (essential) */
		*(.iram-fwd)            /* general packet forwarding used */
		*(.iram-rtkwlan)	/* realtek wlan driver */
		*(.iram-l2-fwd)         /* L2 packet forwarding */
		*(.iram-l34-fwd)        /* L34 packet forwarding */
		*(.iram-tx)		/* protocol stack TX */
		*(.iram-extdev)		/* ROMEDRV extension device fwd */
		*(.iram-crypto)		/* authetication / crypto-engine */
		*(.iram-voip)		/* voip */
		*(.iram)		/* other usage */
		*(.iram.1)
   	}
  
   	. = ALIGN(8192);
   	__dram = . ;
   	__dram_start = . ;
   	.dram	:
   	{
		*(.dram-wapi)           /*wapi encryption/decryption used*/
   		*(.dram-gen)		/* general usage (essential) */
		*(.dram-fwd)            /* general packet forwarding used */
   		*(.dram-l2-fwd)		/* L2 packet forwarding */
		*(.dram-l34-fwd)        /* L34 packet forwarding */
   		*(.dram-extdev)		/* ROMEDRV extension device fwd */
   		*(.dram-rtkwlan)	/* realtek wlan driver */
		*(.dram-crypto)		/* authetication / crypto-engine */
   		*(.dram-voip)		/* voip */
		*(.dram-tx)		/* protocol stack TX */
		*(.dram)		/* other usage */
		*(.dram.1)
   	}
   	. = ALIGN(8192);
   	__dram_end = . ;

	NOTES :text :note
	.dummy : { *(.dummy) } :text

	RODATA

	/* writeable */
	.data : {	/* Data */
		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
		/*
		 * This ALIGN is needed as a workaround for a bug a
		 * gcc bug upto 4.1 which limits the maximum alignment
		 * to at most 32kB and results in the following
		 * warning:
		 *
		 *  CC      arch/mips/kernel/init_task.o
		 * arch/mips/kernel/init_task.c:30: warning: alignment
		 * of ‘init_thread_union�is greater than maximum
		 * object file alignment.  Using 32768
		 */
		. = ALIGN(_PAGE_SIZE);
		*(.data.init_task)

		DATA_DATA
		CONSTRUCTORS
	}
	_gp = . + 0x8000;
	.lit8 : {
		*(.lit8)
	}
	.lit4 : {
		*(.lit4)
	}
	/* We want the small data sections together, so single-instruction offsets
	   can access them all, and initialized data all before uninitialized, so
	   we can shorten the on-disk segment size.  */
	.sdata : {
		*(.sdata)
	}

	. = ALIGN(_PAGE_SIZE);
	.data_nosave : {
		__nosave_begin = .;
		*(.data.nosave)
	}
	. = ALIGN(_PAGE_SIZE);
	__nosave_end = .;

	. = ALIGN(1 << 5);
	.data.cacheline_aligned : {
		*(.data.cacheline_aligned)
	}
	_edata =  .;			/* End of data section */

	/* will be freed after init */
	. = ALIGN(_PAGE_SIZE);		/* Init code and data */
	__init_begin = .;
	.init.text : {
		_sinittext = .;
		INIT_TEXT
		_einittext = .;
	}
	.init.data : {
		INIT_DATA
	}
	. = ALIGN(16);
	.init.setup : {
		__setup_start = .;
		*(.init.setup)
		__setup_end = .;
	}

	.initcall.init : {
		__initcall_start = .;
		INITCALLS
		__initcall_end = .;
	}

	.con_initcall.init : {
		__con_initcall_start = .;
		*(.con_initcall.init)
		__con_initcall_end = .;
	}
	SECURITY_INIT

	/* .exit.text is discarded at runtime, not link time, to deal with
	 * references from .rodata
	 */
	.exit.text : {
		EXIT_TEXT
	}
	.exit.data : {
		EXIT_DATA
	}
#if defined(CONFIG_BLK_DEV_INITRD)
	. = ALIGN(_PAGE_SIZE);
	.init.ramfs : {
		__initramfs_start = .;
		*(.init.ramfs)
		__initramfs_end = .;
	}
#endif
	PERCPU(_PAGE_SIZE)
	. = ALIGN(_PAGE_SIZE);
	__init_end = .;
	/* freed after init ends here */

	__bss_start = .;	/* BSS */
	.sbss  : {
		*(.sbss)
		*(.scommon)
	}
	.bss : {
		*(.bss)
		*(COMMON)
	}
	__bss_stop = .;

	_end = . ;

	/* Sections to be discarded */
	/DISCARD/ : {
		*(.exitcall.exit)

		/* ABI crap starts here */
		*(.MIPS.options)
		*(.options)
		*(.pdr)
		*(.reginfo)
	}

	/* These mark the ABI of the kernel for debuggers.  */
	.mdebug.abi32 : {
		KEEP(*(.mdebug.abi32))
	}
	.mdebug.abi64 : {
		KEEP(*(.mdebug.abi64))
	}

	/* This is the MIPS specific mdebug section.  */
	.mdebug : {
		*(.mdebug)
	}

	STABS_DEBUG
	DWARF_DEBUG

	/* These must appear regardless of  .  */
	.gptab.sdata : {
		*(.gptab.data)
		*(.gptab.sdata)
	}
	.gptab.sbss : {
		*(.gptab.bss)
		*(.gptab.sbss)
	}
}