1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
|
/*******************************************************************************
Copyright (C) Marvell International Ltd. and its affiliates
********************************************************************************
Marvell GPL License Option
If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File in accordance with the terms and conditions of the General
Public License Version 2, June 1991 (the "GPL License"), a copy of which is
available along with the File in the license.txt file or by writing to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED. The GPL License provides additional details about this warranty
disclaimer.
*******************************************************************************/
/*******************************************************************************
* mvSysHwCfg.h - Marvell system HW configuration file
*
* DESCRIPTION:
* None.
*
* DEPENDENCIES:
* None.
*
*******************************************************************************/
#ifndef __INCmvSysHwConfigh
#define __INCmvSysHwConfigh
#include "../../../../include/linux/autoconf.h"
#define CONFIG_MARVELL 1
/* includes */
#define _1K 0x00000400
#define _4K 0x00001000
#define _8K 0x00002000
#define _16K 0x00004000
#define _32K 0x00008000
#define _64K 0x00010000
#define _128K 0x00020000
#define _256K 0x00040000
#define _512K 0x00080000
#define _1M 0x00100000
#define _2M 0x00200000
#define _4M 0x00400000
#define _8M 0x00800000
#define _16M 0x01000000
#define _32M 0x02000000
#define _64M 0x04000000
#define _128M 0x08000000
#define _256M 0x10000000
#define _512M 0x20000000
#define _1G 0x40000000
#define _2G 0x80000000
/****************************************/
/* Soc supporeted Units definitions */
/****************************************/
#ifdef CONFIG_MV_INCLUDE_PEX
#define MV_INCLUDE_PEX
#endif
#ifdef CONFIG_MV_INCLUDE_TWSI
#define MV_INCLUDE_TWSI
#endif
#ifdef CONFIG_MV_INCLUDE_CESA
#define MV_INCLUDE_CESA
#endif
#ifdef CONFIG_MV_INCLUDE_GIG_ETH
#define MV_INCLUDE_GIG_ETH
#endif
#ifdef CONFIG_MV_INCLUDE_INTEG_SATA
#define MV_INCLUDE_INTEG_SATA
#define MV_INCLUDE_SATA
#endif
#ifdef CONFIG_MV_INCLUDE_USB
#define MV_INCLUDE_USB
#define MV_USB_VOLTAGE_FIX
#endif
#ifdef CONFIG_MV_INCLUDE_NAND
#define MV_INCLUDE_NAND
#endif
#ifdef CONFIG_MV_INCLUDE_TDM
#define MV_INCLUDE_TDM
#endif
#ifdef CONFIG_MV_INCLUDE_XOR
#define MV_INCLUDE_XOR
#endif
#ifdef CONFIG_MV_INCLUDE_TWSI
#define MV_INCLUDE_TWSI
#endif
#ifdef CONFIG_MV_INCLUDE_UART
#define MV_INCLUDE_UART
#endif
#ifdef CONFIG_MV_INCLUDE_SPI
#define MV_INCLUDE_SPI
#endif
#ifdef CONFIG_MV_INCLUDE_SFLASH_MTD
#define MV_INCLUDE_SFLASH_MTD
#endif
#ifdef CONFIG_MV_INCLUDE_AUDIO
#define MV_INCLUDE_AUDIO
#endif
#ifdef CONFIG_MV_INCLUDE_TS
#define MV_INCLUDE_TS
#endif
#ifdef CONFIG_MV_INCLUDE_SDIO
#define MV_INCLUDE_SDIO
#endif
/* NAND flash stuff */
#ifdef CONFIG_MV_NAND_BOOT
#define MV_NAND_BOOT
#endif
#ifdef CONFIG_MV_NAND
#define MV_NAND
#endif
/* SPI flash stuff */
#ifdef CONFIG_MV_SPI_BOOT
#define MV_SPI_BOOT
#endif
/****************************************************************/
/************* General configuration ********************/
/****************************************************************/
/* Enable Clock Power Control */
#define MV_INCLUDE_CLK_PWR_CNTRL
/* Disable the DEVICE BAR in the PEX */
#define MV_DISABLE_PEX_DEVICE_BAR
/* Allow the usage of early printings during initialization */
#define MV_INCLUDE_EARLY_PRINTK
/****************************************************************/
/************* NFP configuration ********************************/
/****************************************************************/
#define MV_NFP_SEC_Q_SIZE 64
#define MV_NFP_SEC_REQ_Q_SIZE 1000
/****************************************************************/
/************* CESA configuration ********************/
/****************************************************************/
#ifdef MV_INCLUDE_CESA
#define MV_CESA_MAX_CHAN 4
/* Use 2K of SRAM */
#define MV_CESA_MAX_BUF_SIZE 1600
#endif /* MV_INCLUDE_CESA */
#if defined(CONFIG_MV_INCLUDE_GIG_ETH)
#ifdef CONFIG_MV_NFP_STATS
#define MV_FP_STATISTICS
#else
#undef MV_FP_STATISTICS
#endif
/* Default configuration for SKB_REUSE: 0 - Disabled, 1 - Enabled */
#define MV_ETH_SKB_REUSE_DEFAULT 1
/* Default configuration for TX_EN workaround: 0 - Disabled, 1 - Enabled */
#define MV_ETH_TX_EN_DEFAULT 0
/* un-comment if you want to perform tx_done from within the poll function */
/* #define ETH_TX_DONE_ISR */
/* put descriptors in uncached memory */
/* #define ETH_DESCR_UNCACHED */
/* Descriptors location: DRAM/internal-SRAM */
#define ETH_DESCR_IN_SDRAM
#undef ETH_DESCR_IN_SRAM /* No integrated SRAM in 88Fxx81 devices */
#if defined(ETH_DESCR_IN_SRAM)
#if defined(ETH_DESCR_UNCACHED)
#define ETH_DESCR_CONFIG_STR "Uncached descriptors in integrated SRAM"
#else
#define ETH_DESCR_CONFIG_STR "Cached descriptors in integrated SRAM"
#endif
#elif defined(ETH_DESCR_IN_SDRAM)
#if defined(ETH_DESCR_UNCACHED)
#define ETH_DESCR_CONFIG_STR "Uncached descriptors in DRAM"
#else
#define ETH_DESCR_CONFIG_STR "Cached descriptors in DRAM"
#endif
#else
#error "Ethernet descriptors location undefined"
#endif /* ETH_DESCR_IN_SRAM or ETH_DESCR_IN_SDRAM*/
/* SW Sync-Barrier: not relevant for 88fxx81*/
/* Reasnable to define this macro when descriptors in SRAM and buffers in DRAM */
/* In RX the CPU theoretically might see himself as the descriptor owner, */
/* although the buffer hadn't been written to DRAM yet. Performance cost. */
/* #define INCLUDE_SYNC_BARR */
/* Buffers cache coherency method (buffers in DRAM) */
#ifndef MV_CACHE_COHER_SW
/* Taken from mvCommon.h */
/* Memory uncached, HW or SW cache coherency is not needed */
#define MV_UNCACHED 0
/* Memory cached, HW cache coherency supported in WriteThrough mode */
#define MV_CACHE_COHER_HW_WT 1
/* Memory cached, HW cache coherency supported in WriteBack mode */
#define MV_CACHE_COHER_HW_WB 2
/* Memory cached, No HW cache coherency, Cache coherency must be in SW */
#define MV_CACHE_COHER_SW 3
#endif
/* DRAM cache coherency configuration */
#define MV_CACHE_COHERENCY MV_CACHE_COHER_SW
#define ETHER_DRAM_COHER MV_CACHE_COHER_SW /* No HW coherency in 88Fxx81 devices */
#if (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB)
#define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-back)"
#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT)
#define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-through)"
#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_SW)
#define ETH_SDRAM_CONFIG_STR "DRAM SW cache-coherency"
#elif (ETHER_DRAM_COHER == MV_UNCACHED)
# define ETH_SDRAM_CONFIG_STR "DRAM uncached"
#else
#error "Ethernet-DRAM undefined"
#endif /* ETHER_DRAM_COHER */
/****************************************************************/
/************* Ethernet driver configuration ********************/
/****************************************************************/
/* port's default queueus */
#define ETH_DEF_TXQ 0
#define ETH_DEF_RXQ 0
#define MV_ETH_RX_Q_NUM CONFIG_MV_ETH_RX_Q_NUM
#define MV_ETH_TX_Q_NUM CONFIG_MV_ETH_TX_Q_NUM
/* interrupt coalescing setting */
#define ETH_TX_COAL 200
#define ETH_RX_COAL 200
/* Checksum offloading */
#define TX_CSUM_OFFLOAD
#define RX_CSUM_OFFLOAD
#endif /* CONFIG_MV_INCLUDE_GIG_ETH */
/****************************************************************/
/*************** Telephony configuration ************************/
/****************************************************************/
#if defined(CONFIG_MV_TDM_LINEAR_MODE)
#define MV_TDM_LINEAR_MODE
#elif defined(CONFIG_MV_TDM_ULAW_MODE)
#define MV_TDM_ULAW_MODE
#endif
#if defined(CONFIG_MV_TDM_5CHANNELS)
#define MV_TDM_5CHANNELS
#endif
#if defined(CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE)
#define MV_TDM_USE_EXTERNAL_PCLK_SOURCE
#endif
/* We use the following registers to store DRAM interface pre configuration */
/* auto-detection results */
/* IMPORTANT: We are using mask register for that purpose. Before writing */
/* to units mask register, make sure main maks register is set to disable */
/* all interrupts. */
#define DRAM_BUF_REG0 0x30810 /* sdram bank 0 size */
#define DRAM_BUF_REG1 0x30820 /* sdram config */
#define DRAM_BUF_REG2 0x30830 /* sdram mode */
#define DRAM_BUF_REG3 0x308c4 /* dunit control low */
#define DRAM_BUF_REG4 0x60a90 /* sdram address control */
#define DRAM_BUF_REG5 0x60a94 /* sdram timing control low */
#define DRAM_BUF_REG6 0x60a98 /* sdram timing control high */
#define DRAM_BUF_REG7 0x60a9c /* sdram ODT control low */
#define DRAM_BUF_REG8 0x60b90 /* sdram ODT control high */
#define DRAM_BUF_REG9 0x60b94 /* sdram Dunit ODT control */
#define DRAM_BUF_REG10 0x60b98 /* sdram Extended Mode */
#define DRAM_BUF_REG11 0x60b9c /* sdram Ddr2 Time Low Reg */
#define DRAM_BUF_REG12 0x60a00 /* sdram Ddr2 Time High Reg */
#define DRAM_BUF_REG13 0x60a04 /* dunit Ctrl High */
#define DRAM_BUF_REG14 0x60b00 /* sdram second DIMM exist */
/* Following the pre-configuration registers default values restored after */
/* auto-detection is done */
#define DRAM_BUF_REG_DV 0
/* System Mapping */
#define SDRAM_CS0_BASE 0x00000000
#define SDRAM_CS0_SIZE _256M
#define SDRAM_CS1_BASE 0x10000000
#define SDRAM_CS1_SIZE _256M
#define SDRAM_CS2_BASE 0x20000000
#define SDRAM_CS2_SIZE _256M
#define SDRAM_CS3_BASE 0x30000000
#define SDRAM_CS3_SIZE _256M
/* PEX */
#define PEX0_MEM_BASE 0xe8000000
#define PEX0_MEM_SIZE _128M
#define PEX0_IO_BASE 0xf2000000
#define PEX0_IO_SIZE _1M
/* Device Chip Selects */
#define NFLASH_CS_BASE 0xfa000000
#define NFLASH_CS_SIZE _2M
#define SPI_CS_BASE 0xf4000000
#define SPI_CS_SIZE _16M
#define CRYPT_ENG_BASE 0xf0000000
#define CRYPT_ENG_SIZE _2M
#define BOOTDEV_CS_BASE 0xff800000
#define BOOTDEV_CS_SIZE _8M
/* CS2 - BOOTROM */
#define DEVICE_CS2_BASE 0xff900000
#define DEVICE_CS2_SIZE _1M
/* PEX Work arround */
/* the target we will use for the workarround */
#define PEX_CONFIG_RW_WA_TARGET PEX0_MEM
/*a flag that indicates if we are going to use the
size and base of the target we using for the workarround
window */
#define PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES 1
/* if the above flag is 0 then the following values
will be used for the workarround window base and size,
otherwise the following defines will be ignored */
#define PEX_CONFIG_RW_WA_BASE 0xF3000000
#define PEX_CONFIG_RW_WA_SIZE _16M
/* Internal registers: size is defined in Controllerenvironment */
#define INTER_REGS_BASE 0xFEE00000
/* DRAM detection stuff */
#define MV_DRAM_AUTO_SIZE
/* Board clock detection */
#define TCLK_AUTO_DETECT /* Use Tclk auto detection */
#define SYSCLK_AUTO_DETECT /* Use SysClk auto detection */
#define PCLCK_AUTO_DETECT /* Use PClk auto detection */
#define L2CLK_AUTO_DETECT /* Use L2Clk auto detection */
/* PEX-PCI\PCI-PCI Bridge*/
#define PCI0_IF_PTP 0 /* Bridge exist on pciIf0*/
#endif /* __INCmvSysHwConfigh */
|
