1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
|
/*
* D-Link DIR-600 rev. A1 board support
*
* Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap91-eth.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define DIR_600_A1_GPIO_LED_WPS 0
#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
#define DIR_600_A1_GPIO_BTN_RESET 8
#define DIR_600_A1_GPIO_BTN_WPS 12
#define DIR_600_A1_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir_600_a1_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "nvram",
.offset = 0x030000,
.size = 0x010000,
}, {
.name = "kernel",
.offset = 0x040000,
.size = 0x0e0000,
}, {
.name = "rootfs",
.offset = 0x120000,
.size = 0x2c0000,
}, {
.name = "mac",
.offset = 0x3e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "art",
.offset = 0x3f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "firmware",
.offset = 0x040000,
.size = 0x3a0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data dir_600_a1_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = dir_600_a1_partitions,
.nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
#endif
};
static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
{
.name = "dir-600-a1:green:power",
.gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
}, {
.name = "dir-600-a1:amber:power",
.gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
}, {
.name = "dir-600-a1:blue:wps",
.gpio = DIR_600_A1_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 3,
.gpio = DIR_600_A1_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = BTN_1,
.threshold = 3,
.gpio = DIR_600_A1_GPIO_BTN_WPS,
.active_low = 1,
}
};
static void __init dir_600_a1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
dir_600_a1_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir_600_a1_gpio_buttons),
dir_600_a1_gpio_buttons);
ap91_eth_init(mac);
ap91_pci_init(ee, NULL);
}
MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
dir_600_a1_setup);
|