path: root/openwrt/package/linux/kernel-patches/027-drivers_net_port_based_qos

diff -Nur linux-mips-cvs/drivers/net/port_based_qos/Atan.c linux-broadcom/drivers/net/port_based_qos/Atan.c
--- linux-mips-cvs/drivers/net/port_based_qos/Atan.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-broadcom/drivers/net/port_based_qos/Atan.c	2005-01-31 13:13:14.000000000 +0100
@@ -0,0 +1,177 @@
+#include "Atan.h"
+#include "c47xx.h"
+
+extern void conf_gpio(int x);
+
+/*----------------------------------------------------------------------------
+Write specified data to eeprom
+entry:	*src	= pointer to specified data to write
+		len		= number of short(2 bytes) to be written
+*/
+void write_eeprom( short RegNumber, unsigned short *data, int len )
+{
+    int i2;
+    unsigned short s_addr, s_data;
+    unsigned short *src;
+
+    src = data;
+    SetEEpromToSendState();
+//  the write enable(WEN) instruction must be executed before any device
+//  programming can be done
+
+    s_data = 0x04c0;
+    SendAddrToEEprom(s_data); //00000001 0011000000B
+    SetCSToLowForEEprom();
+
+    s_addr = 0x0500 | (RegNumber & 0x0ff); //00000001 01dddddddd
+    s_data = *src;
+
+    for (i2 = len; i2 > 0 ; i2 --)
+    {
+      SendAddrToEEprom(s_addr); //00000001 01dddddd
+      SendDataToEEprom(s_data); //dddddddd dddddddd
+      SetCSToLowForEEprom();
+      SetCSToLowForEEprom();
+      //WriteWait();     
+      s_addr ++;
+      src ++;
+      s_data = *src;
+    }
+//  after all data has been written to EEprom , the write disable(WDS) 
+//  instruction must be executed
+    SetCSToHighForEEprom();
+    s_data = 0x0400;
+    SendAddrToEEprom(s_data); //00000001 00000000B
+    SetCSToLowForEEprom();
+    SetCSToLowForEEprom();
+}
+
+void SetEEpromToSendState()
+{
+  conf_gpio(0x0);
+  conf_gpio(0x0);
+  conf_gpio(B_ECS);
+  conf_gpio(B_ECS);
+  
+//  ;cs     __--   ,bit 2
+//  ;sck    ____   ,bit 3
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 4
+//  ;
+}
+
+void ResetEEpromToSendState()
+{
+  conf_gpio(0x0);
+  conf_gpio(0x0);
+  conf_gpio(0x0);
+  conf_gpio(0x0);
+  
+//  ;cs     ____   ,bit 2  
+//  ;sck    ____   ,bit 3
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 4 
+//  ;
+}
+
+void SetCSToLowForEEprom()
+{
+  conf_gpio(0x0);
+  conf_gpio(B_ECK);
+  conf_gpio(B_ECK);
+  conf_gpio(0x0);
+  
+//  ;cs     ____   ,bit 2
+//  ;sck    _--_   ,bit 3
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 4 
+//  ;
+}
+
+void SetCSToHighForEEprom()
+{
+  conf_gpio(B_ECS);
+  conf_gpio(B_ECS|B_ECK);
+  conf_gpio(B_ECS|B_ECK);
+  conf_gpio(B_ECS);
+  
+//  ;cs     ----   ,bit 2
+//  ;sck    _--_   ,bit 3
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 4  
+//  ;
+}
+
+void send_1ToEEprom()
+{
+  conf_gpio(B_ECS|B_EDI);
+  conf_gpio(B_ECS|B_ECK|B_EDI);
+  conf_gpio(B_ECS|B_ECK|B_EDI);
+  conf_gpio(B_ECS|B_EDI);
+  
+//  ;cs     ----   ,bit 2
+//  ;sck    _--_   ,bit 3
+//  ;di     ----   ,bit 5
+//  ;do     ____   ,bit 4
+//  ;       
+}
+
+void send_0ToEEprom()
+{
+  conf_gpio(B_ECS);
+  conf_gpio(B_ECS|B_ECK);
+  conf_gpio(B_ECS|B_ECK);
+  conf_gpio(B_ECS);
+  
+//  ;cs     ----   ,bit 2
+//  ;sck    _--_   ,bit 3
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 4
+//  ;       
+}
+
+#if 0
+void WriteWait()
+{
+  unsigned int status;
+  
+  SetCSToLowForEEprom();
+  SetCSToHighForEEprom();
+  do {
+  	SetCSToHighForEEprom();
+  	//status = ReadGPIOData(EDO);
+  	status = gpio & B_EDO;	// read EDO bit
+  }
+  while (!status);   // wait for write - ready
+  SetCSToLowForEEprom();
+}
+#endif
+
+void SendDataToEEprom(short s_data) 
+{
+  int data_mask;
+  
+  for (data_mask = 0x8000; data_mask != 0; )
+  {
+    if (s_data & data_mask) 
+      send_1ToEEprom();
+    else
+      send_0ToEEprom();  
+    data_mask = data_mask >> 1;
+  }
+}
+
+void SendAddrToEEprom(short s_data) 
+{
+  int data_mask;
+  
+  for (data_mask = 0x0400 ;data_mask != 0; )
+  {
+    if (s_data & data_mask) 
+      send_1ToEEprom();
+    else
+      send_0ToEEprom();  
+    data_mask = data_mask >> 1;
+  }
+}
+
diff -Nur linux-mips-cvs/drivers/net/port_based_qos/Atan.h linux-broadcom/drivers/net/port_based_qos/Atan.h
--- linux-mips-cvs/drivers/net/port_based_qos/Atan.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-broadcom/drivers/net/port_based_qos/Atan.h	2005-01-31 13:13:14.000000000 +0100
@@ -0,0 +1,18 @@
+#ifndef _ATAN_H_
+#define _ATAN_H_
+
+#define SINGLECOLOUR				0x1
+#define DUALCOLOUR					0x2
+
+void write_eeprom(short,unsigned short *,int);
+void SetEEpromToSendState(void);
+void ResetEEpromToSendState(void); 
+void SetCSToLowForEEprom(void);
+void SetCSToHighForEEprom(void);  
+void send_1ToEEprom(void);
+void send_0ToEEprom(void);
+//void WriteWait(void);
+void SendAddrToEEprom(short);
+void SendDataToEEprom(short);
+
+#endif
diff -Nur linux-mips-cvs/drivers/net/port_based_qos/Makefile linux-broadcom/drivers/net/port_based_qos/Makefile
--- linux-mips-cvs/drivers/net/port_based_qos/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-broadcom/drivers/net/port_based_qos/Makefile	2005-01-31 13:13:14.000000000 +0100
@@ -0,0 +1,27 @@
+#  Copyright 2001, Cybertan Corporation
+#  All Rights Reserved.
+#  
+#  This is UNPUBLISHED PROPRIETARY SOURCE CODE of Cybertan Corporation;
+#  the contents of this file may not be disclosed to third parties, copied or
+#  duplicated in any form, in whole or in part, without the prior written
+#  permission of Cybertan Corporation.
+#
+#
+# $Id$
+#
+
+O_TARGET	:= port_based_qos_mod.o 
+
+PORT_BASED_QOS_MOD_OBJS	:= port_based_qos.o Atan.o c47xx.o eeprom.o 
+
+export-objs	:= 
+obj-y		:= $(PORT_BASED_QOS_MOD_OBJS)
+obj-m		:= $(O_TARGET)
+
+SRCBASE		:= $(TOPDIR)/../..
+EXTRA_CFLAGS	+= -I$(SRCBASE)/include -Wall -I$(SRCBASE)/
+
+vpath %.c $(SRCBASE)/shared
+
+include $(TOPDIR)/Rules.make
+
diff -Nur linux-mips-cvs/drivers/net/port_based_qos/c47xx.c linux-broadcom/drivers/net/port_based_qos/c47xx.c
--- linux-mips-cvs/drivers/net/port_based_qos/c47xx.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-broadcom/drivers/net/port_based_qos/c47xx.c	2005-01-31 13:13:14.000000000 +0100
@@ -0,0 +1,85 @@
+#include <typedefs.h>
+#include <sbutils.h>
+#include <bcmdevs.h>
+#include <osl.h>
+#include <bcmnvram.h>
+#include <bcmutils.h>
+
+#include <sbpci.h>
+#include <sbchipc.h>
+#include <sbconfig.h>
+#include <sbextif.h>
+#include <sbmips.h>
+#include "c47xx.h"
+extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val);
+extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val);
+extern uint32 sb_gpioin(void *sbh);
+extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val);
+
+#define OUTENMASK	B_RESET|B_ECS|B_ECK|B_EDI
+#define CFGMASK		B_ECS|B_ECK|B_EDI
+#define BIT(x)	(1 << (x))
+#define	ASSERT(exp)		do {} while (0)
+
+void
+conf_gpio(int x)
+{
+	ASSERT(sbh);
+
+	/* Enable all of output pins */
+	sb_gpioouten(sbh, OUTENMASK, OUTENMASK);
+
+	/* We don't want the B_RESET pin changed, unless
+	 * it tries to set the B_RESET pin.
+	 */
+	if (x & B_RESET)
+		sb_gpioout(sbh, OUTENMASK, x);
+	else
+		sb_gpioout(sbh, CFGMASK, x);
+	
+}
+	
+void
+gpio_line_set(int x, unsigned int value)
+{
+	ASSERT(sbh);
+
+	if (value == 1)
+		sb_gpioout(sbh, BIT(x), BIT(x));
+	else if (value == 0)
+		sb_gpioout(sbh, BIT(x), 0);
+}
+
+void
+gpio_line_get(int x, int *value)
+{
+	ASSERT(sbh);
+
+	*value = (sb_gpioin(sbh) >> x) & 0x1;
+}
+
+void
+gpio_line_config_in(int x)
+{
+	ASSERT(sbh);
+	
+	sb_gpioouten(sbh, BIT(x), 0);
+	sb_gpiointmask(sbh, BIT(x), BIT(x));
+}
+
+void
+gpio_line_config_out(int x)
+{
+	ASSERT(sbh);
+
+	sb_gpiointmask(sbh, BIT(x), 0);
+	sb_gpioouten(sbh, BIT(x), BIT(x));
+}
+
+void
+gpio_line_config_out_all(int x)
+{
+	ASSERT(sbh);
+
+	sb_gpioouten(sbh, OUTENMASK, OUTENMASK);
+}
diff -Nur linux-mips-cvs/drivers/net/port_based_qos/c47xx.h linux-broadcom/drivers/net/port_based_qos/c47xx.h
--- linux-mips-cvs/drivers/net/port_based_qos/c47xx.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-broadcom/drivers/net/port_based_qos/c47xx.h	2005-01-31 13:13:14.000000000 +0100
@@ -0,0 +1,23 @@
+#ifndef _C47XX_H_
+#define _C47XX_H_
+
+extern void	*bcm947xx_sbh;
+#define sbh bcm947xx_sbh
+
+#define GPIO0	0
+#define GPIO1	1
+#define GPIO2	2
+#define GPIO3	3
+#define GPIO4	4
+#define GPIO5	5
+#define GPIO6	6
+#define GPIO7	7
+#define GPIO8	8
+
+#define B_RESET		1<<GPIO0
+#define B_ECS		1<<GPIO2
+#define B_ECK		1<<GPIO3
+#define B_EDO		1<<GPIO4
+#define B_EDI		1<<GPIO5
+
+#endif
diff -Nur linux-mips-cvs/drivers/net/port_based_qos/eeprom.c linux-broadcom/drivers/net/port_based_qos/eeprom.c
--- linux-mips-cvs/drivers/net/port_based_qos/eeprom.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-broadcom/drivers/net/port_based_qos/eeprom.c	2005-01-31 13:13:14.000000000 +0100
@@ -0,0 +1,355 @@
+#include <linux/delay.h>
+
+#define EEDO_PIN	4
+#define EECS_PIN	2
+#define EECK_PIN	3
+#define EEDI_PIN	5
+#define RESET_PIN	0
+
+static void SetCSToLowForEEprom(void);
+//static void SetCSToHighForEEprom(void);
+static void send1ToEEprom(void);
+static void send0ToEEprom(void);
+static void InitSerialInterface(void);
+static void SerialPulse(void);
+static void WriteDataToRegister(unsigned short RegNumber, unsigned short data);
+void ReadDataFromRegister(unsigned short addr, unsigned short *hidata, unsigned short *lodata,int select_count);
+static void WriteDataToEEprom(unsigned short addr, unsigned short data);
+static void WriteCmdToEEprom(unsigned short cmd);
+extern void gpio_line_set(int x, unsigned int value);
+extern void gpio_line_get(int x, int *value);
+extern void gpio_line_config_out(int x);
+extern void gpio_line_config_in(int x);
+extern void gpio_line_config_out_all(void);
+//  ;cs     __--   ,bit 3
+//  ;sck    ____   ,bit 4
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 6
+//  ;
+
+static void SetEEpromToSendState(void)
+{        
+	gpio_line_set(EECS_PIN, 0); 
+        gpio_line_set(EECK_PIN, 0);       
+	gpio_line_set(EEDI_PIN, 1);	
+//	gpio_line_set(EEDO_PIN, 1);    /* high impedance */	
+	
+        mdelay(1);
+        gpio_line_set(EECS_PIN, 1);
+//	gpio_line_set(EEDO_PIN, 1);    /* high impedance */
+}
+
+#if 0
+static void EEpromInit(void)
+{
+	gpio_line_set(EECS_PIN, 0); 
+        gpio_line_set(EECK_PIN, 0);       
+	gpio_line_set(EEDI_PIN, 1);	
+	gpio_line_set(EEDO_PIN, 1);    /* high impedance */	
+	
+        mdelay(1);
+}
+   
+//  ;cs     ____   ,bit 3  
+//  ;sck    ____   ,bit 4
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 6 
+//  ;
+static void ResetEEpromToSendState(void)
+{
+	gpio_line_set(EECS_PIN, 0);
+	gpio_line_set(EEDI_PIN, 0);
+	//gpio_line_set(EEDO_PIN, 0);
+	gpio_line_set(EECK_PIN, 0);
+}
+#endif /* 0 */
+   
+//  ;cs     ____   ,bit 3  
+//  ;sck    _--_   ,bit 4
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 6 
+//  ;
+static void SetCSToLowForEEprom(void)
+{
+        /* minimum tcs is 1us */      
+	gpio_line_set(EECS_PIN, 0);        
+        gpio_line_set(EECS_PIN, 0); 	  
+
+	gpio_line_set(EECK_PIN, 0);
+	gpio_line_set(EECK_PIN, 1);
+	gpio_line_set(EECK_PIN, 1);
+	gpio_line_set(EECK_PIN, 1);
+	gpio_line_set(EECK_PIN, 1);
+	gpio_line_set(EECK_PIN, 0);
+
+	gpio_line_set(EECS_PIN, 1);     
+
+        udelay(10);
+}
+
+#if 0  
+//  ;cs     ----   ,bit 3
+//  ;sck    _--_   ,bit 4
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 6  
+//  ;
+static void SetCSToHighForEEprom(void)
+{
+	gpio_line_set(EECS_PIN, 1);
+	
+        /* min tskh and tskl is 1us */
+	gpio_line_set(EECK_PIN, 1);
+	udelay(2);
+	gpio_line_set(EECK_PIN, 0); 
+}
+#endif /* 0 */
+  
+//  ;cs     ----   ,bit 3
+//  ;sck    _--_   ,bit 4
+//  ;di     ----   ,bit 5
+//  ;do     ____   ,bit 6
+//  ;       
+static void send1ToEEprom(void)
+{	   
+//printf("send1ToEEprom(1)...");
+	gpio_line_set(EEDI_PIN, 1);	    	     
+	    
+	gpio_line_set(EECK_PIN, 0);
+        udelay(1);	    
+	gpio_line_set(EECK_PIN, 1);             
+	gpio_line_set(EECK_PIN, 1);	 
+	gpio_line_set(EECK_PIN, 1);   	
+        udelay(1);
+	gpio_line_set(EECK_PIN, 0);
+}
+
+//  ;cs     ----   ,bit 3
+//  ;sck    _--_   ,bit 4
+//  ;di     ____   ,bit 5
+//  ;do     ____   ,bit 6
+//  ;       
+static void send0ToEEprom(void)
+{
+//printf("send0ToEEprom(0)...");
+	gpio_line_set(EEDI_PIN, 0);	    	     
+	    
+	gpio_line_set(EECK_PIN, 0);	    
+	udelay(1);
+	gpio_line_set(EECK_PIN, 1);             
+	gpio_line_set(EECK_PIN, 1);	 
+	gpio_line_set(EECK_PIN, 1);   	
+	udelay(1);
+	gpio_line_set(EECK_PIN, 0);
+}
+
+static void WriteDataToEEprom(unsigned short addr, unsigned short data) 
+{
+  unsigned short addr_mask, data_mask;
+  
+  SetEEpromToSendState();
+  for (addr_mask = 0x400; addr_mask != 0; )
+  {
+    if (addr & addr_mask) 
+      send1ToEEprom();
+    else
+      send0ToEEprom();  
+    addr_mask = addr_mask >> 1;    
+  }
+  for (data_mask = 0x8000; data_mask != 0; )
+  {
+    if (data & data_mask) 
+      send1ToEEprom();
+    else
+      send0ToEEprom();  
+    data_mask = data_mask >> 1;    
+  }
+  SetCSToLowForEEprom();
+}
+
+static void WriteCmdToEEprom(unsigned short cmd) 
+{
+  unsigned short cmd_mask;
+  
+  SetEEpromToSendState();
+  for (cmd_mask = 0x0400 ;cmd_mask != 0; )
+  {
+    if (cmd & cmd_mask) 
+      send1ToEEprom();
+    else
+      send0ToEEprom();  
+    cmd_mask = cmd_mask >> 1;
+  }
+   SetCSToLowForEEprom();
+}
+
+/*
+ * Write data to configure registers through EEPROM interface, even we do not have
+ * an external EEPROM connectted, ADM6996 got a virtual AT39C66 inside
+ */
+static void WriteDataToRegister(unsigned short RegNumber, unsigned short data)
+{
+    unsigned short cmd, addr;   
+
+    printk("WriteDataToRegister(RegNumber=0x%x, data=0x%x)\n", RegNumber, data);
+   
+//  the write enable(WEN) instruction must be executed before any device
+//  programming can be done
+    cmd = 0x04c0;
+    WriteCmdToEEprom(cmd); //00000001 0011000000B    
+
+    addr = 0x0500 | (RegNumber & 0x0ff); //00000001 01dddddddd   
+    WriteDataToEEprom(addr, data); //00000001 01dddddd
+    
+     
+//  after all data has been written to EEprom , the write disable(WDS) 
+//  instruction must be executed   
+    cmd = 0x0400;
+    WriteCmdToEEprom(cmd); //00000001 00000000B   
+}
+
+static void SerialDelay(int count)
+{        
+     udelay(count);
+}
+
+static void InitSerialInterface(void)
+{
+        gpio_line_set(EECK_PIN, 0);  
+        gpio_line_set(EEDI_PIN, 0);  
+}
+
+static void SerialPulse(void)
+{
+	 gpio_line_set(EECK_PIN, 0);  
+	 gpio_line_set(EECK_PIN, 1);  	
+         SerialDelay(10);
+         gpio_line_set(EECK_PIN, 1);  
+         gpio_line_set(EECK_PIN, 0);  
+}
+/* 
+ * Since there is no EEPROM is our board, read from EEPROM need to obey the timing alike
+ *  MII interface, EECK = MDC, EEDI = MDIO, please refer to section 4.3 of ADM6996 datasheet
+ */
+void ReadDataFromRegister(unsigned short addr, unsigned short *hidata, unsigned short *lodata, int select_count) 
+{
+  	unsigned short addr_mask, data_mask;
+  	int value, i;
+        unsigned char StartBits, Opcode, TAbits;
+	
+	gpio_line_config_out_all();
+	mdelay(1);	
+	/* initialize serial interface */
+        gpio_line_set(EECS_PIN, 0);  
+	InitSerialInterface();        
+
+        /* Preamble, 35 bits */
+        gpio_line_set(EECK_PIN, 0); 
+        gpio_line_set(EEDI_PIN, 1);
+        for (i = 0; i < 35; i++)        
+        {    
+            gpio_line_set(EECK_PIN, 1); 	                
+            SerialDelay(10);
+            gpio_line_set(EECK_PIN, 0); 
+	    SerialDelay(10);
+        }
+ 
+        /* Start bits, 2-bit(01b) */
+        InitSerialInterface();
+        StartBits = 0x01;
+        for (i = 0; i < 2; i++)
+        {
+             value = (StartBits & 2) ? 1 : 0;
+             gpio_line_set(EEDI_PIN, value);  
+             SerialDelay(1);
+             SerialPulse();
+             StartBits <<= 1;
+         }
+          
+         /* Opcode, read = 10b */
+         InitSerialInterface();
+         Opcode = 0x02;
+         for (i = 0; i < 2; i++)
+         {
+             value = (Opcode & 0x02) ? 1 : 0;
+             gpio_line_set(EEDI_PIN, value);  
+	     SerialDelay(1);
+             SerialPulse();
+             Opcode <<= 1;
+         }         
+
+         /* 10 bits register address */
+         /* 1-bit Table Select, 2-bit Device Address, 7-bit Register Address  */         
+         InitSerialInterface();
+	 if (select_count)
+	 	addr = (addr & 0x7f) | 0x200; 
+	 else
+	 	addr = addr & 0x7f ; 
+         for (addr_mask = 0x200; addr_mask != 0; addr_mask >>= 1)
+         {
+             value = (addr & addr_mask) ? 1 : 0;
+             gpio_line_set(EEDI_PIN, value);  
+	     SerialDelay(1);
+             SerialPulse();           
+         }      	
+
+         /* TA, turnaround 2-bit */
+         InitSerialInterface();
+         TAbits = 0x02;	
+          gpio_line_config_in(EEDI_PIN);
+         for (i = 0; i < 2; i++)
+         {
+             gpio_line_set(EECK_PIN, 1);  	     
+	     SerialDelay(4);  	     
+	     gpio_line_get(EEDI_PIN, &value); 
+	     SerialDelay(4);  
+             TAbits <<= 1;            
+	     gpio_line_set(EECK_PIN, 1);
+         }
+ 
+	
+         /* Latch data from serial management EEDI pin */
+         *hidata = 0;
+         gpio_line_set(EECK_PIN, 0);  
+	 for (data_mask = 0x8000; data_mask != 0; data_mask >>= 1)       
+         {
+             SerialDelay(4);             
+             gpio_line_set(EECK_PIN, 1);  
+             gpio_line_get(EEDI_PIN, &value); 
+             if (value)
+             {
+                 *hidata |= data_mask;                 
+	     }
+             gpio_line_set(EECK_PIN, 0); 
+	     SerialDelay(4);
+         }
+	 *lodata = 0;
+         gpio_line_set(EECK_PIN, 0);  
+	 for (data_mask = 0x8000; data_mask != 0; data_mask >>= 1)       
+         {
+             SerialDelay(4);           
+             gpio_line_set(EECK_PIN, 1);  
+             gpio_line_get(EEDI_PIN, &value); 
+             if (value)
+             {
+                 *lodata |= data_mask;                 
+	     }
+             gpio_line_set(EECK_PIN, 0); 
+	     SerialDelay(4);
+         }
+  	
+         SerialDelay(2);
+
+         /* Idle, EECK must send at least one clock at idle time */
+         SerialPulse();
+         gpio_line_set(EECK_PIN, 0);  
+         SerialDelay(10);
+         gpio_line_set(EECK_PIN, 1);  
+         SerialDelay(10);
+         gpio_line_set(EECK_PIN, 0);  
+         SerialPulse();
+
+         gpio_line_config_out(EEDI_PIN);
+	 gpio_line_set(EECS_PIN, 1);
+
+   printk("ReadDataFromRegister(addr=0x%x, hidata=0x%x, lodata=0x%x)\n", addr, *hidata, *lodata);
+}
diff -Nur linux-mips-cvs/drivers/net/port_based_qos/port_based_qos.c linux-broadcom/drivers/net/port_based_qos/port_based_qos.c
--- linux-mips-cvs/drivers/net/port_based_qos/port_based_qos.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-broadcom/drivers/net/port_based_qos/port_based_qos.c	2005-01-31 13:13:14.000000000 +0100
@@ -0,0 +1,460 @@
+ /*
+ * Remaining issues:
+ *   + stats support
+ *   + multicast support
+ *   + media sense
+ *   + half/full duplex
+ *   - random MAC addr.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <asm/io.h>
+
+#include <linux/sysctl.h>
+#include <cy_conf.h>
+
+#define MODULE_NAME "port_based_qos_mod"
+#define DEVICE_NAME "qos"
+#define MODULE_VERSION "0.0.1"
+
+extern void ReadDataFromRegister(unsigned short addr, unsigned short *hidata, unsigned short *lodata,int select_count);
+
+#ifdef PERFORMANCE_SUPPORT
+static struct ctl_table_header *qos_sysctl_header;
+static unsigned long qos[28];
+
+static ctl_table mytable[] = {
+         { 2000, "qos", 
+	   qos, sizeof(qos), 
+	   0644, NULL, 
+	   proc_dointvec },
+         { 0 }
+};
+
+static unsigned short statis_addr_map[7][6] ={
+	{0x04, 0x06, 0x08, 0x0a, 0x0b, 0x0c},
+	{0x16, 0x18, 0x1a, 0x1c, 0x1d, 0x1e},
+	{0x0d, 0x0f, 0x11, 0x13, 0x14, 0x15},
+	{0x1f, 0x21, 0x23, 0x25, 0x26, 0x27},
+	{0x31, 0x33, 0x35, 0x37, 0x38, 0x39},
+	{0x28, 0x2a, 0x2c, 0x2e, 0x2f, 0x30},
+	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01}
+};
+
+unsigned long get_statistic_from_serial(unsigned short port, unsigned short item)
+{
+    unsigned short hidata, lodata;
+	
+    ReadDataFromRegister(statis_addr_map[item][port], &hidata, &lodata, 1); 
+	return ((hidata << 16) | lodata);
+}
+#endif
+
+#ifdef HW_QOS_SUPPORT
+struct port_qos_t{
+	int addr;
+	int content_mask;
+	int *content_set; 
+};
+
+void WriteDataToRegister_(unsigned short reg_idx, unsigned short content_idx);
+extern void write_eeprom(short,short *,int);
+
+#define BANDWIDTH_1_BIT	2
+#define BANDWIDTH_2_BIT	4
+#define BANDWIDTH_3_BIT	6
+#define BANDWIDTH_4_BIT	7
+
+#define PORT_CONFIG_1	0x3
+#define PORT_CONFIG_2	0x5
+#define PORT_CONFIG_3	0x7
+#define PORT_CONFIG_4	0x8
+#define BANDWIDTH_CTL_123	0x31
+#define BANDWIDTH_CTL_4	0x32
+#define BANDWIDTH_CTL_ENABLE	0x33
+#define DISCARD_MODE	0x10
+#define TOS_PRIO_MAP	0xf
+
+#define PRIORITY_MASK	0xfc7f
+#define PRIORITY_DISABLE_MASK	0xfc7e
+#define FLOW_CTL_MASK	0xfffe
+#define RATE_LIMIT_MASK_1	0xff8f
+#define RATE_LIMIT_MASK_2	0xf8ff
+#define RATE_LIMIT_MASK_3	0x8fff
+#define RATE_LIMIT_MASK_4	0xfff8
+#define BANDWIDTH_CTL_MASK	0xff2b
+#define DISCARD_MASK	0x0fff
+
+#define BANDWIDTH_ENABLE_1	1 << BANDWIDTH_1_BIT//04 
+#define BANDWIDTH_ENABLE_2	1 << BANDWIDTH_2_BIT//10 
+#define BANDWIDTH_ENABLE_3	1 << BANDWIDTH_3_BIT//40 
+#define BANDWIDTH_ENABLE_4	1 << BANDWIDTH_4_BIT//80 
+#define BANDWIDTH_CTL_MASK_1	0xffff^BANDWIDTH_ENABLE_1//0xfffb 
+#define BANDWIDTH_CTL_MASK_2	0xffff^BANDWIDTH_ENABLE_2//0xffef 
+#define BANDWIDTH_CTL_MASK_3	0xffff^BANDWIDTH_ENABLE_3//0xffbf 
+#define BANDWIDTH_CTL_MASK_4	0xffff^BANDWIDTH_ENABLE_4//0xff7f 
+
+/*static int disable_content[] = {0x0};
+//static int enable_content[] = {0xd4, 0x0cff};//bit 7,6,4,2; Q1=11(50%),Q0=00(0%)*/
+//static int sw_content[] = {0x0,0x0c00};//bit 7,6,4,2; Q1=11(50%),Q0=00(0%)
+static int sw_content[] = {0x0,0xc000};//bit 7,6,4,2; Q1=11(50%),Q0=00(0%)
+static int port_priority_content[] = {0x080,0x380};//Q0,Q3
+//static int port_priority_content[] = {0x300,0x0};//Q1,Q0
+static int port_flow_ctl_content[] = {0x0,0x1};
+static int port_rate_limit_content_1[] = {0x0,0x00,0x10,0x20,0x30,0x40,0x50,0x60,0x70};
+static int port_rate_limit_content_2[] = {0x0,0x000,0x100,0x200,0x300,0x400,0x500,0x600,0x700};
+static int port_rate_limit_content_3[] = {0x0,0x0000,0x1000,0x2000,0x3000,0x4000,0x5000,0x6000,0x7000};
+static int port_rate_limit_content_4[] = {0x0,0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7};
+static int port_rate_limit_enable_1[] = {0x0, BANDWIDTH_ENABLE_1};
+static int port_rate_limit_enable_2[] = {0x0, BANDWIDTH_ENABLE_2};
+static int port_rate_limit_enable_3[] = {0x0, BANDWIDTH_ENABLE_3};
+static int port_rate_limit_enable_4[] = {0x0, BANDWIDTH_ENABLE_4};
+
+static struct port_qos_t port_mii_disable[] = {
+	{ BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK, sw_content},
+	//{ DISCARD_MODE, DISCARD_MASK, sw_content},
+	{ PORT_CONFIG_1, PRIORITY_MASK, sw_content},//port_priority_1
+	{ PORT_CONFIG_2, PRIORITY_MASK, sw_content},//port_priority_2
+	{ PORT_CONFIG_3, PRIORITY_MASK, sw_content},//port_priority_3
+	{ PORT_CONFIG_4, PRIORITY_MASK, sw_content},//port_priority_4
+	{ PORT_CONFIG_1, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_1
+	{ PORT_CONFIG_2, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_2
+	{ PORT_CONFIG_3, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_3
+	{ PORT_CONFIG_4, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_4
+	{ -1}
+};
+
+static struct port_qos_t port_mii_enable[] = {
+	//{ BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK, enable_content},
+	//{ DISCARD_MODE, DISCARD_MASK, sw_content},
+	{ -1}
+};
+
+struct port_qos_t *port_mii_sw_array[] = {port_mii_disable, port_mii_enable};
+
+/*static struct port_qos_t port_mii_addr[] = {
+	{ PORT_CONFIG_1, PRIORITY_MASK, port_priority_content},//port_priority_1
+	{ PORT_CONFIG_1, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_1
+	//{ "port_frame_type_1", 0x3},
+	{ BANDWIDTH_CTL_123, RATE_LIMIT_MASK_14, port_rate_limit_content_14},//port_rate_limit_1
+	{ PORT_CONFIG_2, PRIORITY_MASK, port_priority_content},//port_priority_2
+	{ PORT_CONFIG_2, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_2
+	//{ "port_frame_type_2", 0x5},
+	{ BANDWIDTH_CTL_123, RATE_LIMIT_MASK_2, port_rate_limit_content_2},//port_rate_limit_2
+	{ PORT_CONFIG_3, PRIORITY_MASK, port_priority_content},//port_priority_3
+	{ PORT_CONFIG_3, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_3
+	//{ "port_frame_type_3", 0x7},
+	{ BANDWIDTH_CTL_123, RATE_LIMIT_MASK_3, port_rate_limit_content_3},//port_rate_limit_3
+	//{ "port_priority_4", 0x8, 0x380},
+	{ PORT_CONFIG_4, PRIORITY_MASK, port_priority_content},//port_priority_4
+	{ PORT_CONFIG_4, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_4
+	//{ "port_frame_type_4", 0x8},
+	{ BANDWIDTH_CTL_4, RATE_LIMIT_MASK_14, port_rate_limit_content_14},//port_rate_limit_4
+	{ -1}
+};*/
+
+static struct port_qos_t priority_1[] = {
+	{ PORT_CONFIG_1, PRIORITY_MASK, port_priority_content},//port_priority_1
+	{ -1}
+};
+static struct port_qos_t flow_control_1[] = {
+	{ PORT_CONFIG_1, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_1
+	{ -1}
+};
+static struct port_qos_t rate_limit_1[] = {
+	{ BANDWIDTH_CTL_123, RATE_LIMIT_MASK_1, port_rate_limit_content_1},//port_rate_limit_1
+	{ BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_1, port_rate_limit_enable_1},//port_rate_limit_4
+	{ -1}
+};
+static struct port_qos_t priority_2[] = {
+	{ PORT_CONFIG_2, PRIORITY_MASK, port_priority_content},//port_priority_2
+	{ -1}
+};
+static struct port_qos_t flow_control_2[] = {
+	{ PORT_CONFIG_2, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_2
+	{ -1}
+};
+static struct port_qos_t rate_limit_2[] = {
+	{ BANDWIDTH_CTL_123, RATE_LIMIT_MASK_2, port_rate_limit_content_2},//port_rate_limit_2
+	{ BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_2, port_rate_limit_enable_2},//port_rate_limit_4
+	{ -1}
+};
+static struct port_qos_t priority_3[] = {
+	{ PORT_CONFIG_3, PRIORITY_MASK, port_priority_content},//port_priority_3
+	{ -1}
+};
+static struct port_qos_t flow_control_3[] = {
+	{ PORT_CONFIG_3, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_3
+	{ -1}
+};
+static struct port_qos_t rate_limit_3[] = {
+	{ BANDWIDTH_CTL_123, RATE_LIMIT_MASK_3, port_rate_limit_content_3},//port_rate_limit_3
+	{ BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_3, port_rate_limit_enable_3},//port_rate_limit_4
+	{ -1}
+};
+static struct port_qos_t priority_4[] = {
+	{ PORT_CONFIG_4, PRIORITY_MASK, port_priority_content},//port_priority_4
+	{ -1}
+};
+static struct port_qos_t flow_control_4[] = {
+	{ PORT_CONFIG_4, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_4
+	{ -1}
+};
+static struct port_qos_t rate_limit_4[] = {
+	{ BANDWIDTH_CTL_4, RATE_LIMIT_MASK_4, port_rate_limit_content_4},//port_rate_limit_4
+	{ BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_4, port_rate_limit_enable_4},//port_rate_limit_4
+	{ -1}
+};
+
+static struct port_qos_t *port_mii_addr[] = {
+	priority_1,
+	flow_control_1,
+	rate_limit_1,
+	priority_2,
+	flow_control_2,
+	rate_limit_2,
+	priority_3,
+	flow_control_3,
+	rate_limit_3,
+	priority_4,
+	flow_control_4,
+	rate_limit_4,
+	NULL
+};
+
+void WriteDataToRegister_(unsigned short reg_idx, unsigned short content_idx)
+{
+    short RegNumber;
+    unsigned short data, hidata=0x0, lodata=0x0;
+    int i;
+    struct port_qos_t *port_qos = port_mii_addr[reg_idx];
+    
+    //printk("\nWriteDataToRegister_:reg_idx=%d content_idx=%d\n", reg_idx, content_idx);
+    if (!port_qos)
+	 port_qos = port_mii_sw_array[content_idx];
+	
+    for (i=0; port_qos[i].addr != -1; i++)
+    {
+    	RegNumber = port_qos[i].addr;
+ 	ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
+
+        if (!(RegNumber % 2)) /* even port number use lower word */
+		hidata = lodata;
+
+        data = (hidata & port_qos[i].content_mask) | (((i > 0) && (content_idx > 1))? port_qos[i].content_set[1] : port_qos[i].content_set[content_idx]);
+	
+	write_eeprom(RegNumber, &data, 1);
+   	ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
+    }
+   	ReadDataFromRegister(0xf, &hidata, &lodata, 0);
+    	
+	/*RegNumber = port_mii_addr[reg_idx].addr;
+	if (RegNumber == -1)//Disable or Enable
+	{
+		struct port_qos_t *port_mii_sw = port_mii_sw_array[content_idx];
+	
+    		printk("\nWriteDataToRegister_:reg_idx=%d content_idx=%d\n", reg_idx, content_idx);
+		for (i=0; port_mii_sw[i].addr != -1; i++)
+		{
+    			RegNumber = port_mii_sw[i].addr;
+				
+			ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
+        		
+			if (!(RegNumber % 2)) 
+				hidata = lodata;
+			 
+		        data = (hidata & port_mii_sw[i].content_mask) | port_mii_sw[i].content_set[i];
+	
+			write_eeprom(RegNumber, &data, 1);
+    			
+   			ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
+			printk("\n============== %s===============\n", (content_idx==0)?"disable":"enable");
+		}
+	}
+	else
+	{
+    		ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
+
+        	if (!(RegNumber % 2)) 
+			hidata = lodata;
+
+	        data = (hidata & port_mii_addr[reg_idx].content_mask) | port_mii_addr[reg_idx].content_set[content_idx];
+	
+		write_eeprom(RegNumber, &data, 1);
+   		ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
+	}*/
+}
+#endif
+
+static int dev_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+    struct mii_ioctl_data *data = (struct mii_ioctl_data *)req->ifr_data;
+#ifdef PERFORMANCE_SUPPORT
+    int item, port; 
+    
+    unsigned long status_item;
+#endif
+    
+    switch (cmd)
+    {
+    case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+    case SIOCDEVPRIVATE:	/* for binary compat, remove in 2.5 */
+
+	/* Fall through to the SIOCGMIIREG, taken from eepro100 and rtl
+	 * drivers */
+#ifdef PERFORMANCE_SUPPORT
+    case SIOCGMIIREG:		/* Read MII PHY register. */
+	for (item=0; item<6; item++)
+		for (port=1; port<5; port++){
+			qos[(item * 4) + (port-1)] = get_statistic_from_serial(port, item);	
+		}
+	
+	status_item = get_statistic_from_serial(0, 6);
+	
+	qos[24] = (0x1 & (status_item >> 8));
+	qos[25] = (0x1 & (status_item >> 16));
+	qos[26] = (0x1 & (status_item >> 24));
+	qos[27] = (0x1 & (status_item >> 28));
+	
+	return 0;
+#endif
+
+    case SIOCDEVPRIVATE+1:	/* for binary compat, remove in 2.5 */
+#ifdef HW_QOS_SUPPORT
+    case SIOCSMIIREG:		/* Write MII PHY register. */
+	{
+	printk("\n x phy_id=%x\n", data->phy_id);
+	printk("\n x reg_num=%x\n", data->reg_num);
+	printk("\n x val_in=%x\n", data->val_in);
+	printk("\n x val_out=%x\n", data->val_out);
+		
+   	WriteDataToRegister_(data->phy_id, data->val_in); 
+	return 0;
+	}
+#endif
+    case SIOCDEVPRIVATE+2:	/* for binary compat, remove in 2.5 */
+    default:
+	return -EOPNOTSUPP;
+    }
+}
+
+static int __devinit qos_eth_probe(struct net_device *dev)
+{
+    
+    SET_MODULE_OWNER(dev);
+
+    ether_setup(dev);
+
+    strcpy(dev->name, DEVICE_NAME "0");
+
+    dev->do_ioctl = dev_do_ioctl;
+
+    return 0;
+}
+
+#ifdef HW_QOS_SUPPORT
+static char *port_option_name[] = {
+ 	"port_priority_1",
+	"port_flow_control_1",
+	//{ "port_frame_type_1",
+	"port_rate_limit_1",
+	"port_priority_2",
+	"port_flow_control_2",
+	//{ "port_frame_type_2",
+	"port_rate_limit_2",
+	"port_priority_3",
+	"port_flow_control_3",
+	//{ "port_frame_type_3",
+	"port_rate_limit_3",
+	"port_priority_4",
+	//{ "port_priority_4", PORT_CONFIG_4, PRIORITY_MASK, port_priority_content},
+	"port_flow_control_4",
+	//{ "port_frame_type_4",
+	"port_rate_limit_4",
+	"QoS",
+	NULL
+};
+
+extern char *nvram_get(const char *name);
+extern uint bcm_atoi(char *s);
+
+static int set_port_option(struct net_device *dev, unsigned short port_addr, char *option_content)
+{
+    struct ifreq ifr;
+    struct mii_ioctl_data stats;
+	
+    stats.phy_id=port_addr;
+    stats.val_in=bcm_atoi(option_content);
+
+    ifr.ifr_data = (void *)&stats;
+    
+    return dev_do_ioctl(dev, &ifr, SIOCSMIIREG);
+}
+
+
+void
+restore_default_from_NV(struct net_device *dev)
+{
+	unsigned short i;
+	char *value = NULL;
+	
+	for (i = 0; port_option_name[i]; i++)
+	{
+		if((value = nvram_get(port_option_name[i])))
+			set_port_option(dev, i, value);
+	}
+	return;
+}
+#endif
+
+static struct net_device qos_devices;
+
+/* Module initialization and cleanup */
+int init_module(void)
+{
+    int res;
+    struct net_device *dev;
+
+    printk("Initializing " MODULE_NAME " driver " MODULE_VERSION "\n");
+
+	dev = &qos_devices;
+
+	dev->init = qos_eth_probe;
+
+	if ((res = register_netdev(dev)))
+	    printk("Failed to register netdev. res = %d\n", res);
+
+#ifdef PERFORMANCE_SUPPORT
+    	qos_sysctl_header = register_sysctl_table(mytable, 0);
+#endif
+#ifdef HW_QOS_SUPPORT
+	restore_default_from_NV(dev);
+	write_eeprom(TOS_PRIO_MAP, &sw_content[0], 1);/* disable TOS priority map*/
+#endif
+    return 0;
+}
+
+void cleanup_module(void)
+{
+	struct net_device *dev = &qos_devices;
+	if (dev->priv != NULL)
+	{
+	    unregister_netdev(dev);
+	    kfree(dev->priv);
+	    dev->priv = NULL;
+	}
+    	
+#ifdef PERFORMANCE_SUPPORT
+	unregister_sysctl_table(qos_sysctl_header);
+#endif
+}
+