rtl819xx - Realtek rtl819xx port to OpenWrt

	Commit message (Expand)	Author	Age	Files	Lines
*	ramips: extract eeprom for the built-in wlan module on the RT-N56U	juhosg	2012-02-16	1	-1/+3
*	ramips: rt3883: change eeprom file name	juhosg	2012-02-16	1	-1/+1
*	ramips: select HW_HAS_PCI on per-board basis	juhosg	2012-02-16	3	-2/+2
*	ramips: rt3883: remove a stray character from rt3883.h	juhosg	2012-02-16	1	-1/+0
*	ramips: rt288x: don't register the PCI controller on each board	juhosg	2012-02-16	3	-3/+8
*	ramips: raeth: separate ring allocation and setup	juhosg	2012-02-16	1	-44/+90
*	ramips: rt288x: fix PCI resource conflict	juhosg	2012-02-15	1	-0/+8
*	[ramips] correct PCI IO/Mem resource swapping	florian	2012-02-15	1	-4/+4
*	[ramips] add Ralink V11ST-FE board support	florian	2012-02-15	11	-0/+134
*	ramips: raeth: add a helper function for skb allocation	juhosg	2012-02-15	1	-6/+16
*	ramips: raeth: use netdev_alloc_skb	juhosg	2012-02-15	1	-2/+3
*	ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor struct...	juhosg	2012-02-15	1	-2/+2
*	ramips: raeth: use 're' instead of 'priv' everywhere	juhosg	2012-02-15	1	-73/+73
*	ramips: raeth: force link down in ramips_phy_stop	juhosg	2012-02-15	1	-7/+6
*	ramips: raeth: serialize ramips_link_adjust calls	juhosg	2012-02-15	1	-0/+8
*	ramips: raeth: add PHYLIB support	juhosg	2012-02-15	5	-10/+229
*	ramips: extract eeprom for the PCIe wlan module on the RT-N56U	juhosg	2012-02-14	1	-4/+12
*	ramips: rt3883: enable PCI on the RT-N56U board	juhosg	2012-02-14	1	-0/+16
*	ramips: rt3883: add PCI support	juhosg	2012-02-14	8	-1/+548
*	ramips: rt3883: sync 2.6.39 config	juhosg	2012-02-14	1	-7/+3
*	ramips: use SoC specific irq.h	juhosg	2012-02-14	3	-3/+36
*	ramips: rt3883: update package list in the default profile	juhosg	2012-02-13	1	-1/+1
*	ramips: add preliminary support for the Asus RT-N56U board	juhosg	2012-02-13	11	-0/+174
*	ramips: raeth: enable MDIO code for RT3883	juhosg	2012-02-13	1	-2/+2
*	ramips: add preliminary support for the RT3662/RT3883 SoCs	juhosg	2012-02-13	40	-9/+2286
*	ramips: use GENERIC_{4,8}M image template for WR5123GN	juhosg	2012-02-12	1	-5/+2
*	ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline	juhosg	2012-02-12	1	-1/+2
*	ramips: add initial support for 3.2	juhosg	2012-02-12	13	-1/+607
*	ramips: include 'linux/module.h' in the ramips_spi driver	juhosg	2012-02-12	1	-0/+1
*	ramips: rt288x: remove per-board physmap_flash_data instances	juhosg	2012-02-12	6	-28/+30
*	ramips: rt305x: remove per-board physmap_flash_data instances	juhosg	2012-02-12	21	-120/+93
*	ramips: load gpio-polled keys module	juhosg	2012-02-11	1	-1/+1
*	ramips: remove yet another CONFIG_MTD_PARTITION ifdef	juhosg	2012-02-11	1	-2/+0
*	ramips: use gpio-keys-polled instead of gpio-buttons	juhosg	2012-02-11	27	-138/+159
*	ramips: add MIPS platform file	juhosg	2012-02-11	2	-29/+29
*	ramips: add MDIO bus support for RT288X	juhosg	2012-02-11	2	-2/+154
*	ramips: fix Belkin F5D8235-v2 VLAN setup	juhosg	2012-02-11	1	-4/+10
*	ramips: raeth: make debugging messages configurable	juhosg	2012-02-11	4	-4/+16
*	ramips: raeth: use device pointer in DMA API calls	juhosg	2012-02-11	1	-11/+12
*	ramips: raeth: add netdev pointer to private structure	juhosg	2012-02-11	2	-0/+2
*	ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit	juhosg	2012-02-11	1	-5/+4
*	ramips: raeth: unmap rx DMA address in ramips_cleanup_dma	juhosg	2012-02-11	1	-1/+4
*	ramips: raeth: add rx_dma array to store the DMA address of the rx packets	juhosg	2012-02-11	2	-10/+17
*	ramips: raeth: use dma_addr_t for the descriptors	juhosg	2012-02-11	2	-9/+10
*	ramips: raeth: unmap DMA memory when a packet is received	juhosg	2012-02-11	1	-0/+4
*	ramips: raeth: add a temporary pktlen variable	juhosg	2012-02-11	1	-3/+6
*	ramips: raeth: protect macro parameters	juhosg	2012-02-11	1	-4/+4
*	ramips: raeth: indicate dropped packets in stats	juhosg	2012-02-11	1	-0/+2
*	ramips: raeth: use the NUM_TX_DESC for the tx_skb array	juhosg	2012-02-11	1	-1/+1
*	ramips: use uncached address in detect_mem_size	juhosg	2012-02-11	1	-2/+3