summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/drivers/net
Commit message (Expand)AuthorAgeFilesLines
* ar71xx: improve MDIO busy wait codejuhosg2012-07-031-21/+30
* ar71xx: do not override the mdio clock for ar9330. the override value (obtain...nbd2012-05-281-2/+0
* ar71xx: improve rx performance of the ethernet driver by using build_skb to d...nbd2012-05-282-41/+49
* ar71xx: fix MII clock settings for various chips, improves ethernet stability...nbd2012-05-272-2/+16
* ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eri...nbd2012-05-151-2/+1
* kernel: rewrite the phy packet hook, put it in the network stack to avoid hav...nbd2012-05-061-26/+14
* ar71xx: allow to disable link polling on unused PHYsjuhosg2012-04-291-4/+11
* ar71xx: enable MIB counters in the built-in switch of the AR934xjuhosg2012-04-251-2/+11
* ar71xx: move micrel PHY driver to the generic linux targetjuhosg2012-03-151-83/+0
* ar71xx: ag71xx: fix ARP frame reception on AR934x switch portsjuhosg2012-03-131-11/+35
* ar71xx: ag71xx: start aneg on switch PHYs after resetjuhosg2012-03-131-0/+10
* ar71xx: ag71xx: poll PHY status of all available switch portsjuhosg2012-03-131-1/+2
* ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switchjuhosg2012-03-131-2/+6
* ar71xx: ag71xx: fix get_port_link callbackjuhosg2012-03-071-2/+8
* ar71xx: ag71xx: use the generic get_port_link implementationjuhosg2012-03-071-66/+0
* ar71xx: ag71xx: keep VLAN tags if VLAN is not enabledjuhosg2012-03-011-4/+8
* ar71xx: ag71xx: add BQL supportjuhosg2012-02-101-5/+13
* ar71xx: add preliminary support for 3.3juhosg2012-02-101-0/+294
* ar71xx: merge files-3.2 to filesjuhosg2012-02-1010-0/+3895
* ar71xx: move arch specific files to files-2.6.39juhosg2012-01-2210-3904/+0
* ar71xx: include linux/module.h in the micrel phy driverjuhosg2012-01-221-0/+1
* ar71xx: ag71xx: implement get_port_{link,stats} callbacksjuhosg2011-12-311-0/+142
* ar71xx: set a reserved bit that resets to 1 when writing the address table co...nbd2011-12-221-0/+2
* ar71xx: ag71xx: fix switch port setup for AR934Xjuhosg2011-12-151-11/+41
* ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934Xjuhosg2011-12-151-3/+7
* ar71xx: ag71xx: setup switch interface mode on AR934Xjuhosg2011-12-151-0/+19
* ar71xx: ag71xx: detect the built-in switch of the AR934X SoCsjuhosg2011-12-151-12/+36
* ar71xx: introduce ar71xx_switch_datajuhosg2011-12-152-5/+8
* ar71xx: ag71xx: check PHY IDs before accessing the switch registersjuhosg2011-12-151-9/+8
* ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724xjuhosg2011-12-151-13/+25
* ar71xx: ag71xx: nuke ar7240sw_initjuhosg2011-12-151-6/+1
* ar71xx: ag71xx: add support for getting switch port link statusjuhosg2011-11-131-0/+67
* ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xxjuhosg2011-11-132-19/+1
* ar71xx: ag71xx: remove unused mii_cfg related functions and definesjuhosg2011-11-131-40/+0
* ar71xx: set MII interface speed from the set_speed callbacksjuhosg2011-11-131-6/+0
* ar71xx: rename set_pll callback to set_speed in ag71xx_platform_datajuhosg2011-11-131-2/+2
* ar71xx: ag71xx: remove MII interface setup codejuhosg2011-11-132-15/+0
* ar71xx: ag71xx: use fixed link parameters if the mii bus is not registeredjuhosg2011-11-121-0/+4
* ar71xx: remove dead codenbd2011-11-081-15/+0
* ar71xx: on ar7240, exclude ports from their own port vlan destination masknbd2011-11-081-2/+1
* ag71xx: close a race between the phy state machine and link statejogo2011-10-081-3/+7
* ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)nbd2011-09-111-1/+1
* ar71xx: add some code to detect DMA stuck conditions on ar7240nbd2011-08-132-1/+33
* ar71xx: on ar724x only reset the link status in the restart handler, the fast...nbd2011-08-131-0/+6
* ar71xx: fix ethernet FIFO state corruption on ar7240nbd2011-08-042-20/+61
* ag71xx: fix memory corruption issues on ar7240 on ethernet start/stopnbd2011-08-042-3/+19
* ar71xx: fix MAC/MDIO reset mask handlingnbd2011-08-041-2/+2
* ar71xx: reinitialize global switch settings after reset on ar7240nbd2011-07-201-23/+24
* ar71xx: configure address aging on ar7240nbd2011-07-201-2/+12
* ar71xx: reset the phy in the ethernet init on ar724xnbd2011-07-201-0/+13