summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/arch/mips
Commit message (Expand)AuthorAgeFilesLines
* ar71xx: move leds-gpio device support into a spearate filejuhosg2009-12-2626-48/+121
* ar71xx: move PB42 specific PCI init code into a separate filejuhosg2009-12-2510-101/+83
* ar71xx: remove unnecessary includesjuhosg2009-12-252-5/+1
* ar71xx: fix bi-color led on the TL-WR841N v1.5juhosg2009-12-251-4/+7
* ar71xx: add support for the TL-WR841N v1.5 boardjuhosg2009-12-225-0/+168
* ar71xx: update AR7240 PCI codejuhosg2009-12-208-84/+223
* ar71xx: Fix LED active_low for the TL-WR1043ND boardjuhosg2009-12-191-4/+4
* tl-wr1043nd: Register missing leds.juhosg2009-12-181-2/+12
* ar71xx: ar913x_wmac device support into a separate filejuhosg2009-12-1816-53/+116
* ar71xx: move AP94 specific PCI init code into a separate filejuhosg2009-12-186-262/+205
* ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on thejuhosg2009-12-185-0/+164
* ar71xx: add common m25p80 devicejuhosg2009-12-1819-208/+98
* ar71xx: add driver for the USB LED on the WNDR3700juhosg2009-12-111-0/+1
* ar71xx: add ar71xx_device_stopped functionjuhosg2009-12-112-0/+36
* ar71xx: merge DSA switch patchjuhosg2009-12-112-2/+12
* ar71xx: register rtl8366-smi device on the DIR-825 B1 boardjuhosg2009-12-091-4/+21
* rtl8306: manage the wan port as a separate phy device with proper link status...nbd2009-12-091-2/+0
* ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160n...nbd2009-12-081-1/+1
* ar71xx: TL-WR1043ND support cleanupjuhosg2009-12-082-7/+7
* ar71xx: preliminary support for the TL-WR1043NDjuhosg2009-12-085-0/+145
* ar71xx: register rtl8366_smi device on the WNDR3700juhosg2009-12-081-1/+20
* ar71xx: add support for external mii_busjuhosg2009-12-082-0/+4
* ar71xx: DIR-825 support cleanupjuhosg2009-12-035-46/+29
* ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks tojuhosg2009-12-035-0/+326
* ar71xx: override fifo_cfg[123] values on AR7240juhosg2009-11-303-2/+16
* ar71xx: add usb support for ubnt rocket mnbd2009-11-294-3/+53
* ar71xx: fix mac address for 5GHz interface on WNDR3700juhosg2009-11-281-5/+9
* ar71xx: add PCI fixup for the WNDR3700 boardjuhosg2009-11-271-0/+77
* ar71xx: fix pll_1000 values for the WNDR3700juhosg2009-11-271-0/+2
* ar71xx: add AR724x GPIO_FUNC register bit definesjuhosg2009-11-271-0/+18
* ar71xx: fix AR724X_GPIO_COUNTjuhosg2009-11-271-1/+1
* ar71xx: add AR724x register definesjuhosg2009-11-271-0/+2
* ar71xx: use a separate board id for rocket mnbd2009-11-183-5/+10
* ar71xx: add Ubiquiti Rocket M and Nanostation M supportmatteo2009-11-183-33/+55
* ar71xx: setup platform data for ath9k on the TL-WR741ND, Bullet M and on the ...juhosg2009-11-163-5/+96
* ar71xx: register LEDs and buttons on the WNDR3700juhosg2009-11-161-1/+60
* ar71xx: use __init for ar{71,91}xx_usb_setupjuhosg2009-11-161-2/+2
* ar71xx: add preliminary support for the Netgear WNDR3700juhosg2009-11-135-0/+140
* ar71xx: use soc specific divider for mdio clockjuhosg2009-10-302-3/+6
* ar71xx: Compex WPJ543 board is supported as welljuhosg2009-10-202-2/+2
* ar71xx: fix PCI IRQ map of the WP543juhosg2009-10-201-2/+6
* ar71xx: reset the phy chip along with the ethernet mac on the WP543 boardjuhosg2009-10-191-0/+2
* ar71xx: reset the ethernet device before registrationjuhosg2009-10-191-0/+7
* ar71xx: initialize PCI controller on the Bullet Mjuhosg2009-10-011-0/+11
* ar71xx: init ethernet mac address on the Bullet Mjuhosg2009-10-011-0/+3
* ar71xx: register GPIO button on the Bullet Mjuhosg2009-10-011-0/+16
* ar71xx: add PCI Host Controller fixup for ar724xjuhosg2009-10-011-0/+23
* ar71xx: use ar71xx_pci_fixup on ar71xx SoCs onlyjuhosg2009-10-011-0/+5
* ar71xx: fix a typo in the ar724x PCI codejuhosg2009-10-011-1/+1
* ar71xx: don't use mac_base2 in the ag71xx driverjuhosg2009-09-231-12/+2
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 11:38:17 +0000