summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/magicbox-2.6/config/default22
-rw-r--r--target/linux/magicbox-2.6/patches/100-cf_slot.patch2306
2 files changed, 2325 insertions, 3 deletions
diff --git a/target/linux/magicbox-2.6/config/default b/target/linux/magicbox-2.6/config/default
index f17b33f64..dc33f83c0 100644
--- a/target/linux/magicbox-2.6/config/default
+++ b/target/linux/magicbox-2.6/config/default
@@ -13,6 +13,17 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_BASE_SMALL=0
CONFIG_BIOS_FIXUP=y
# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_IDE=m
+# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_MAGICBOX_IDE=y
# CONFIG_BOOKE_WDT is not set
CONFIG_BOOT_LOAD=0x00400000
# CONFIG_BT is not set
@@ -47,12 +58,19 @@ CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
CONFIG_IBM_EMAC_TXB=8
CONFIG_IBM_OCP=y
-# CONFIG_IDE is not set
+CONFIG_IDE=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_IDE_GENERIC=m
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_ISA_DMA_API=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_KERNEL_START=0xc0000000
# CONFIG_KEXEC is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_MAGICBOX=y
CONFIG_MATH_EMULATION=y
@@ -93,7 +111,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_NAND is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_OTP is not set
@@ -114,7 +131,6 @@ CONFIG_NOT_COHERENT_CACHE=y
# CONFIG_NVRAM is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PC_KEYBOARD is not set
# CONFIG_PM is not set
CONFIG_PPC=y
diff --git a/target/linux/magicbox-2.6/patches/100-cf_slot.patch b/target/linux/magicbox-2.6/patches/100-cf_slot.patch
new file mode 100644
index 000000000..b5e12438f
--- /dev/null
+++ b/target/linux/magicbox-2.6/patches/100-cf_slot.patch
@@ -0,0 +1,2306 @@
+diff -purN linux.old/drivers/ide/ide.c linux.dev/drivers/ide/ide.c
+--- linux.old/drivers/ide/ide.c 2007-01-10 20:10:37.000000000 +0100
++++ linux.dev/drivers/ide/ide.c 2007-04-09 01:25:30.866800288 +0200
+@@ -1783,6 +1783,7 @@ done:
+
+ extern void pnpide_init(void);
+ extern void h8300_ide_init(void);
++extern void ide_magicbox_init(void);
+
+ /*
+ * probe_for_hwifs() finds/initializes "known" IDE interfaces
+@@ -1847,6 +1848,9 @@ static void __init probe_for_hwifs (void
+ #ifdef CONFIG_H8300
+ h8300_ide_init();
+ #endif
++#ifdef CONFIG_BLK_DEV_MAGICBOX_IDE
++ ide_magicbox_init();
++#endif
+ }
+
+ void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
+diff -purN linux.old/drivers/ide/ide.c.orig linux.dev/drivers/ide/ide.c.orig
+--- linux.old/drivers/ide/ide.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/ide/ide.c.orig 2007-01-10 20:10:37.000000000 +0100
+@@ -0,0 +1,2099 @@
++/*
++ * linux/drivers/ide/ide.c Version 7.00beta2 Mar 05 2003
++ *
++ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
++ */
++
++/*
++ * Mostly written by Mark Lord <mlord@pobox.com>
++ * and Gadi Oxman <gadio@netvision.net.il>
++ * and Andre Hedrick <andre@linux-ide.org>
++ *
++ * See linux/MAINTAINERS for address of current maintainer.
++ *
++ * This is the multiple IDE interface driver, as evolved from hd.c.
++ * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
++ * (usually 14 & 15).
++ * There can be up to two drives per interface, as per the ATA-2 spec.
++ *
++ * Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64
++ * Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
++ * Tertiary: ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
++ * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
++ * ...
++ *
++ * From hd.c:
++ * |
++ * | It traverses the request-list, using interrupts to jump between functions.
++ * | As nearly all functions can be called within interrupts, we may not sleep.
++ * | Special care is recommended. Have Fun!
++ * |
++ * | modified by Drew Eckhardt to check nr of hd's from the CMOS.
++ * |
++ * | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
++ * | in the early extended-partition checks and added DM partitions.
++ * |
++ * | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
++ * |
++ * | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
++ * | and general streamlining by Mark Lord (mlord@pobox.com).
++ *
++ * October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
++ *
++ * Mark Lord (mlord@pobox.com) (IDE Perf.Pkg)
++ * Delman Lee (delman@ieee.org) ("Mr. atdisk2")
++ * Scott Snyder (snyder@fnald0.fnal.gov) (ATAPI IDE cd-rom)
++ *
++ * This was a rewrite of just about everything from hd.c, though some original
++ * code is still sprinkled about. Think of it as a major evolution, with
++ * inspiration from lots of linux users, esp. hamish@zot.apana.org.au
++ *
++ * Version 1.0 ALPHA initial code, primary i/f working okay
++ * Version 1.3 BETA dual i/f on shared irq tested & working!
++ * Version 1.4 BETA added auto probing for irq(s)
++ * Version 1.5 BETA added ALPHA (untested) support for IDE cd-roms,
++ * ...
++ * Version 5.50 allow values as small as 20 for idebus=
++ * Version 5.51 force non io_32bit in drive_cmd_intr()
++ * change delay_10ms() to delay_50ms() to fix problems
++ * Version 5.52 fix incorrect invalidation of removable devices
++ * add "hdx=slow" command line option
++ * Version 5.60 start to modularize the driver; the disk and ATAPI
++ * drivers can be compiled as loadable modules.
++ * move IDE probe code to ide-probe.c
++ * move IDE disk code to ide-disk.c
++ * add support for generic IDE device subdrivers
++ * add m68k code from Geert Uytterhoeven
++ * probe all interfaces by default
++ * add ioctl to (re)probe an interface
++ * Version 6.00 use per device request queues
++ * attempt to optimize shared hwgroup performance
++ * add ioctl to manually adjust bandwidth algorithms
++ * add kerneld support for the probe module
++ * fix bug in ide_error()
++ * fix bug in the first ide_get_lock() call for Atari
++ * don't flush leftover data for ATAPI devices
++ * Version 6.01 clear hwgroup->active while the hwgroup sleeps
++ * support HDIO_GETGEO for floppies
++ * Version 6.02 fix ide_ack_intr() call
++ * check partition table on floppies
++ * Version 6.03 handle bad status bit sequencing in ide_wait_stat()
++ * Version 6.10 deleted old entries from this list of updates
++ * replaced triton.c with ide-dma.c generic PCI DMA
++ * added support for BIOS-enabled UltraDMA
++ * rename all "promise" things to "pdc4030"
++ * fix EZ-DRIVE handling on small disks
++ * Version 6.11 fix probe error in ide_scan_devices()
++ * fix ancient "jiffies" polling bugs
++ * mask all hwgroup interrupts on each irq entry
++ * Version 6.12 integrate ioctl and proc interfaces
++ * fix parsing of "idex=" command line parameter
++ * Version 6.13 add support for ide4/ide5 courtesy rjones@orchestream.com
++ * Version 6.14 fixed IRQ sharing among PCI devices
++ * Version 6.15 added SMP awareness to IDE drivers
++ * Version 6.16 fixed various bugs; even more SMP friendly
++ * Version 6.17 fix for newest EZ-Drive problem
++ * Version 6.18 default unpartitioned-disk translation now "BIOS LBA"
++ * Version 6.19 Re-design for a UNIFORM driver for all platforms,
++ * model based on suggestions from Russell King and
++ * Geert Uytterhoeven
++ * Promise DC4030VL now supported.
++ * add support for ide6/ide7
++ * delay_50ms() changed to ide_delay_50ms() and exported.
++ * Version 6.20 Added/Fixed Generic ATA-66 support and hwif detection.
++ * Added hdx=flash to allow for second flash disk
++ * detection w/o the hang loop.
++ * Added support for ide8/ide9
++ * Added idex=ata66 for the quirky chipsets that are
++ * ATA-66 compliant, but have yet to determine a method
++ * of verification of the 80c cable presence.
++ * Specifically Promise's PDC20262 chipset.
++ * Version 6.21 Fixing/Fixed SMP spinlock issue with insight from an old
++ * hat that clarified original low level driver design.
++ * Version 6.30 Added SMP support; fixed multmode issues. -ml
++ * Version 6.31 Debug Share INTR's and request queue streaming
++ * Native ATA-100 support
++ * Prep for Cascades Project
++ * Version 7.00alpha First named revision of ide rearrange
++ *
++ * Some additional driver compile-time options are in ./include/linux/ide.h
++ *
++ * To do, in likely order of completion:
++ * - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
++ *
++ */
++
++#define REVISION "Revision: 7.00alpha2"
++#define VERSION "Id: ide.c 7.00a2 20020906"
++
++#undef REALLY_SLOW_IO /* most systems can safely undef this */
++
++#define _IDE_C /* Tell ide.h it's really us */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/timer.h>
++#include <linux/mm.h>
++#include <linux/interrupt.h>
++#include <linux/major.h>
++#include <linux/errno.h>
++#include <linux/genhd.h>
++#include <linux/blkpg.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <linux/ide.h>
++#include <linux/completion.h>
++#include <linux/reboot.h>
++#include <linux/cdrom.h>
++#include <linux/seq_file.h>
++#include <linux/device.h>
++#include <linux/bitops.h>
++
++#include <asm/byteorder.h>
++#include <asm/irq.h>
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++
++/* default maximum number of failures */
++#define IDE_DEFAULT_MAX_FAILURES 1
++
++static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
++ IDE2_MAJOR, IDE3_MAJOR,
++ IDE4_MAJOR, IDE5_MAJOR,
++ IDE6_MAJOR, IDE7_MAJOR,
++ IDE8_MAJOR, IDE9_MAJOR };
++
++static int idebus_parameter; /* holds the "idebus=" parameter */
++static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */
++static int initializing; /* set while initializing built-in drivers */
++
++DECLARE_MUTEX(ide_cfg_sem);
++ __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
++
++#ifdef CONFIG_BLK_DEV_IDEPCI
++static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
++#endif
++
++#ifdef CONFIG_IDEDMA_AUTO
++int noautodma = 0;
++#else
++int noautodma = 1;
++#endif
++
++EXPORT_SYMBOL(noautodma);
++
++/*
++ * This is declared extern in ide.h, for access by other IDE modules:
++ */
++ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */
++
++EXPORT_SYMBOL(ide_hwifs);
++
++/*
++ * Do not even *think* about calling this!
++ */
++static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
++{
++ unsigned int unit;
++
++ /* bulk initialize hwif & drive info with zeros */
++ memset(hwif, 0, sizeof(ide_hwif_t));
++
++ /* fill in any non-zero initial values */
++ hwif->index = index;
++ hwif->major = ide_hwif_to_major[index];
++
++ hwif->name[0] = 'i';
++ hwif->name[1] = 'd';
++ hwif->name[2] = 'e';
++ hwif->name[3] = '0' + index;
++
++ hwif->bus_state = BUSSTATE_ON;
++
++ hwif->atapi_dma = 0; /* disable all atapi dma */
++ hwif->ultra_mask = 0x80; /* disable all ultra */
++ hwif->mwdma_mask = 0x80; /* disable all mwdma */
++ hwif->swdma_mask = 0x80; /* disable all swdma */
++
++ init_completion(&hwif->gendev_rel_comp);
++
++ default_hwif_iops(hwif);
++ default_hwif_transport(hwif);
++ for (unit = 0; unit < MAX_DRIVES; ++unit) {
++ ide_drive_t *drive = &hwif->drives[unit];
++
++ drive->media = ide_disk;
++ drive->select.all = (unit<<4)|0xa0;
++ drive->hwif = hwif;
++ drive->ctl = 0x08;
++ drive->ready_stat = READY_STAT;
++ drive->bad_wstat = BAD_W_STAT;
++ drive->special.b.recalibrate = 1;
++ drive->special.b.set_geometry = 1;
++ drive->name[0] = 'h';
++ drive->name[1] = 'd';
++ drive->name[2] = 'a' + (index * MAX_DRIVES) + unit;
++ drive->max_failures = IDE_DEFAULT_MAX_FAILURES;
++ drive->using_dma = 0;
++ drive->vdma = 0;
++ INIT_LIST_HEAD(&drive->list);
++ init_completion(&drive->gendev_rel_comp);
++ }
++}
++
++static void init_hwif_default(ide_hwif_t *hwif, unsigned int index)
++{
++ hw_regs_t hw;
++
++ memset(&hw, 0, sizeof(hw_regs_t));
++
++ ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq);
++
++ memcpy(&hwif->hw, &hw, sizeof(hw));
++ memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
++
++ hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
++#ifdef CONFIG_BLK_DEV_HD
++ if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA)
++ hwif->noprobe = 1; /* may be overridden by ide_setup() */
++#endif
++}
++
++extern void ide_arm_init(void);
++
++/*
++ * init_ide_data() sets reasonable default values into all fields
++ * of all instances of the hwifs and drives, but only on the first call.
++ * Subsequent calls have no effect (they don't wipe out anything).
++ *
++ * This routine is normally called at driver initialization time,
++ * but may also be called MUCH earlier during kernel "command-line"
++ * parameter processing. As such, we cannot depend on any other parts
++ * of the kernel (such as memory allocation) to be functioning yet.
++ *
++ * This is too bad, as otherwise we could dynamically allocate the
++ * ide_drive_t structs as needed, rather than always consuming memory
++ * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
++ *
++ * FIXME: We should stuff the setup data into __init and copy the
++ * relevant hwifs/allocate them properly during boot.
++ */
++#define MAGIC_COOKIE 0x12345678
++static void __init init_ide_data (void)
++{
++ ide_hwif_t *hwif;
++ unsigned int index;
++ static unsigned long magic_cookie = MAGIC_COOKIE;
++
++ if (magic_cookie != MAGIC_COOKIE)
++ return; /* already initialized */
++ magic_cookie = 0;
++
++ /* Initialise all interface structures */
++ for (index = 0; index < MAX_HWIFS; ++index) {
++ hwif = &ide_hwifs[index];
++ init_hwif_data(hwif, index);
++ init_hwif_default(hwif, index);
++#if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI)
++ hwif->irq = hwif->hw.irq =
++ ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
++#endif
++ }
++#ifdef CONFIG_IDE_ARM
++ initializing = 1;
++ ide_arm_init();
++ initializing = 0;
++#endif
++}
++
++/**
++ * ide_system_bus_speed - guess bus speed
++ *
++ * ide_system_bus_speed() returns what we think is the system VESA/PCI
++ * bus speed (in MHz). This is used for calculating interface PIO timings.
++ * The default is 40 for known PCI systems, 50 otherwise.
++ * The "idebus=xx" parameter can be used to override this value.
++ * The actual value to be used is computed/displayed the first time
++ * through. Drivers should only use this as a last resort.
++ *
++ * Returns a guessed speed in MHz.
++ */
++
++static int ide_system_bus_speed(void)
++{
++#ifdef CONFIG_PCI
++ static struct pci_device_id pci_default[] = {
++ { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
++ { }
++ };
++#else
++#define pci_default 0
++#endif /* CONFIG_PCI */
++
++ if (!system_bus_speed) {
++ if (idebus_parameter) {
++ /* user supplied value */
++ system_bus_speed = idebus_parameter;
++ } else if (pci_dev_present(pci_default)) {
++ /* safe default value for PCI */
++ system_bus_speed = 33;
++ } else {
++ /* safe default value for VESA and PCI */
++ system_bus_speed = 50;
++ }
++ printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
++ "for PIO modes%s\n", system_bus_speed,
++ idebus_parameter ? "" : "; override with idebus=xx");
++ }
++ return system_bus_speed;
++}
++
++#ifdef CONFIG_PROC_FS
++struct proc_dir_entry *proc_ide_root;
++#endif
++
++static struct resource* hwif_request_region(ide_hwif_t *hwif,
++ unsigned long addr, int num)
++{
++ struct resource *res = request_region(addr, num, hwif->name);
++
++ if (!res)
++ printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
++ hwif->name, addr, addr+num-1);
++ return res;
++}
++
++/**
++ * ide_hwif_request_regions - request resources for IDE
++ * @hwif: interface to use
++ *
++ * Requests all the needed resources for an interface.
++ * Right now core IDE code does this work which is deeply wrong.
++ * MMIO leaves it to the controller driver,
++ * PIO will migrate this way over time.
++ */
++
++int ide_hwif_request_regions(ide_hwif_t *hwif)
++{
++ unsigned long addr;
++ unsigned int i;
++
++ if (hwif->mmio == 2)
++ return 0;
++ BUG_ON(hwif->mmio == 1);
++ addr = hwif->io_ports[IDE_CONTROL_OFFSET];
++ if (addr && !hwif_request_region(hwif, addr, 1))
++ goto control_region_busy;
++ hwif->straight8 = 0;
++ addr = hwif->io_ports[IDE_DATA_OFFSET];
++ if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) {
++ if (!hwif_request_region(hwif, addr, 8))
++ goto data_region_busy;
++ hwif->straight8 = 1;
++ return 0;
++ }
++ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
++ addr = hwif->io_ports[i];
++ if (!hwif_request_region(hwif, addr, 1)) {
++ while (--i)
++ release_region(addr, 1);
++ goto data_region_busy;
++ }
++ }
++ return 0;
++
++data_region_busy:
++ addr = hwif->io_ports[IDE_CONTROL_OFFSET];
++ if (addr)
++ release_region(addr, 1);
++control_region_busy:
++ /* If any errors are return, we drop the hwif interface. */
++ return -EBUSY;
++}
++
++/**
++ * ide_hwif_release_regions - free IDE resources
++ *
++ * Note that we only release the standard ports,
++ * and do not even try to handle any extra ports
++ * allocated for weird IDE interface chipsets.
++ *
++ * Note also that we don't yet handle mmio resources here. More
++ * importantly our caller should be doing this so we need to
++ * restructure this as a helper function for drivers.
++ */
++
++void ide_hwif_release_regions(ide_hwif_t *hwif)
++{
++ u32 i = 0;
++
++ if (hwif->mmio == 2)
++ return;
++ if (hwif->io_ports[IDE_CONTROL_OFFSET])
++ release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
++ if (hwif->straight8) {
++ release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
++ return;
++ }
++ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
++ if (hwif->io_ports[i])
++ release_region(hwif->io_ports[i], 1);
++}
++
++/**
++ * ide_hwif_restore - restore hwif to template
++ * @hwif: hwif to update
++ * @tmp_hwif: template
++ *
++ * Restore hwif to a previous state by copying most settings
++ * from the template.
++ */
++
++static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
++{
++ hwif->hwgroup = tmp_hwif->hwgroup;
++
++ hwif->gendev.parent = tmp_hwif->gendev.parent;
++
++ hwif->proc = tmp_hwif->proc;
++
++ hwif->major = tmp_hwif->major;
++ hwif->straight8 = tmp_hwif->straight8;
++ hwif->bus_state = tmp_hwif->bus_state;
++
++ hwif->atapi_dma = tmp_hwif->atapi_dma;
++ hwif->ultra_mask = tmp_hwif->ultra_mask;
++ hwif->mwdma_mask = tmp_hwif->mwdma_mask;
++ hwif->swdma_mask = tmp_hwif->swdma_mask;
++
++ hwif->chipset = tmp_hwif->chipset;
++ hwif->hold = tmp_hwif->hold;
++
++#ifdef CONFIG_BLK_DEV_IDEPCI
++ hwif->pci_dev = tmp_hwif->pci_dev;
++ hwif->cds = tmp_hwif->cds;
++#endif
++
++ hwif->tuneproc = tmp_hwif->tuneproc;
++ hwif->speedproc = tmp_hwif->speedproc;
++ hwif->selectproc = tmp_hwif->selectproc;
++ hwif->reset_poll = tmp_hwif->reset_poll;
++ hwif->pre_reset = tmp_hwif->pre_reset;
++ hwif->resetproc = tmp_hwif->resetproc;
++ hwif->intrproc = tmp_hwif->intrproc;
++ hwif->maskproc = tmp_hwif->maskproc;
++ hwif->quirkproc = tmp_hwif->quirkproc;
++ hwif->busproc = tmp_hwif->busproc;
++
++ hwif->ata_input_data = tmp_hwif->ata_input_data;
++ hwif->ata_output_data = tmp_hwif->ata_output_data;
++ hwif->atapi_input_bytes = tmp_hwif->atapi_input_bytes;
++ hwif->atapi_output_bytes = tmp_hwif->atapi_output_bytes;
++
++ hwif->dma_setup = tmp_hwif->dma_setup;
++ hwif->dma_exec_cmd = tmp_hwif->dma_exec_cmd;
++ hwif->dma_start = tmp_hwif->dma_start;
++ hwif->ide_dma_end = tmp_hwif->ide_dma_end;
++ hwif->ide_dma_check = tmp_hwif->ide_dma_check;
++ hwif->ide_dma_on = tmp_hwif->ide_dma_on;
++ hwif->ide_dma_off_quietly = tmp_hwif->ide_dma_off_quietly;
++ hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq;
++ hwif->ide_dma_host_on = tmp_hwif->ide_dma_host_on;
++ hwif->ide_dma_host_off = tmp_hwif->ide_dma_host_off;
++ hwif->ide_dma_lostirq = tmp_hwif->ide_dma_lostirq;
++ hwif->ide_dma_timeout = tmp_hwif->ide_dma_timeout;
++
++ hwif->OUTB = tmp_hwif->OUTB;
++ hwif->OUTBSYNC = tmp_hwif->OUTBSYNC;
++ hwif->OUTW = tmp_hwif->OUTW;
++ hwif->OUTL = tmp_hwif->OUTL;
++ hwif->OUTSW = tmp_hwif->OUTSW;
++ hwif->OUTSL = tmp_hwif->OUTSL;
++
++ hwif->INB = tmp_hwif->INB;
++ hwif->INW = tmp_hwif->INW;
++ hwif->INL = tmp_hwif->INL;
++ hwif->INSW = tmp_hwif->INSW;
++ hwif->INSL = tmp_hwif->INSL;
++
++ hwif->sg_max_nents = tmp_hwif->sg_max_nents;
++
++ hwif->mmio = tmp_hwif->mmio;
++ hwif->rqsize = tmp_hwif->rqsize;
++ hwif->no_lba48 = tmp_hwif->no_lba48;
++
++#ifndef CONFIG_BLK_DEV_IDECS
++ hwif->irq = tmp_hwif->irq;
++#endif
++
++ hwif->dma_base = tmp_hwif->dma_base;
++ hwif->dma_master = tmp_hwif->dma_master;
++ hwif->dma_command = tmp_hwif->dma_command;
++ hwif->dma_vendor1 = tmp_hwif->dma_vendor1;
++ hwif->dma_status = tmp_hwif->dma_status;
++ hwif->dma_vendor3 = tmp_hwif->dma_vendor3;
++ hwif->dma_prdtable = tmp_hwif->dma_prdtable;
++
++ hwif->config_data = tmp_hwif->config_data;
++ hwif->select_data = tmp_hwif->select_data;
++ hwif->extra_base = tmp_hwif->extra_base;
++ hwif->extra_ports = tmp_hwif->extra_ports;
++ hwif->autodma = tmp_hwif->autodma;
++ hwif->udma_four = tmp_hwif->udma_four;
++ hwif->no_dsc = tmp_hwif->no_dsc;
++
++ hwif->hwif_data = tmp_hwif->hwif_data;
++}
++
++/**
++ * ide_unregister - free an IDE interface
++ * @index: index of interface (will change soon to a pointer)
++ *
++ * Perform the final unregister of an IDE interface. At the moment
++ * we don't refcount interfaces so this will also get split up.
++ *
++ * Locking:
++ * The caller must not hold the IDE locks
++ * The drive present/vanishing is not yet properly locked
++ * Take care with the callbacks. These have been split to avoid
++ * deadlocking the IDE layer. The shutdown callback is called
++ * before we take the lock and free resources. It is up to the
++ * caller to be sure there is no pending I/O here, and that
++ * the interface will not be reopened (present/vanishing locking
++ * isn't yet done BTW). After we commit to the final kill we
++ * call the cleanup callback with the ide locks held.
++ *
++ * Unregister restores the hwif structures to the default state.
++ * This is raving bonkers.
++ */
++
++void ide_unregister(unsigned int index)
++{
++ ide_drive_t *drive;
++ ide_hwif_t *hwif, *g;
++ static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */
++ ide_hwgroup_t *hwgroup;
++ int irq_count = 0, unit;
++
++ BUG_ON(index >= MAX_HWIFS);
++
++ BUG_ON(in_interrupt());
++ BUG_ON(irqs_disabled());
++ down(&ide_cfg_sem);
++ spin_lock_irq(&ide_lock);
++ hwif = &ide_hwifs[index];
++ if (!hwif->present)
++ goto abort;
++ for (unit = 0; unit < MAX_DRIVES; ++unit) {
++ drive = &hwif->drives[unit];
++ if (!drive->present)
++ continue;
++ spin_unlock_irq(&ide_lock);
++ device_unregister(&drive->gendev);
++ wait_for_completion(&drive->gendev_rel_comp);
++ spin_lock_irq(&ide_lock);
++ }
++ hwif->present = 0;
++
++ spin_unlock_irq(&ide_lock);
++
++ destroy_proc_ide_interface(hwif);
++
++ hwgroup = hwif->hwgroup;
++ /*
++ * free the irq if we were the only hwif using it
++ */
++ g = hwgroup->hwif;
++ do {
++ if (g->irq == hwif->irq)
++ ++irq_count;
++ g = g->next;
++ } while (g != hwgroup->hwif);
++ if (irq_count == 1)
++ free_irq(hwif->irq, hwgroup);
++
++ spin_lock_irq(&ide_lock);
++ /*
++ * Note that we only release the standard ports,
++ * and do not even try to handle any extra ports
++ * allocated for weird IDE interface chipsets.
++ */
++ ide_hwif_release_regions(hwif);
++
++ /*
++ * Remove us from the hwgroup, and free
++ * the hwgroup if we were the only member
++ */
++ if (hwif->next == hwif) {
++ BUG_ON(hwgroup->hwif != hwif);
++ kfree(hwgroup);
++ } else {
++ /* There is another interface in hwgroup.
++ * Unlink us, and set hwgroup->drive and ->hwif to
++ * something sane.
++ */
++ g = hwgroup->hwif;
++ while (g->next != hwif)
++ g = g->next;
++ g->next = hwif->next;
++ if (hwgroup->hwif == hwif) {
++ /* Chose a random hwif for hwgroup->hwif.
++ * It's guaranteed that there are no drives
++ * left in the hwgroup.
++ */
++ BUG_ON(hwgroup->drive != NULL);
++ hwgroup->hwif = g;
++ }
++ BUG_ON(hwgroup->hwif == hwif);
++ }
++
++ /* More messed up locking ... */
++ spin_unlock_irq(&ide_lock);
++ device_unregister(&hwif->gendev);
++ wait_for_completion(&hwif->gendev_rel_comp);
++
++ /*
++ * Remove us from the kernel's knowledge
++ */
++ blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
++ kfree(hwif->sg_table);
++ unregister_blkdev(hwif->major, hwif->name);
++ spin_lock_irq(&ide_lock);
++
++ if (hwif->dma_base) {
++ (void) ide_release_dma(hwif);
++
++ hwif->dma_base = 0;
++ hwif->dma_master = 0;
++ hwif->dma_command = 0;
++ hwif->dma_vendor1 = 0;
++ hwif->dma_status = 0;
++ hwif->dma_vendor3 = 0;
++ hwif->dma_prdtable = 0;
++
++ hwif->extra_base = 0;
++ hwif->extra_ports = 0;
++ }
++
++ /* copy original settings */
++ tmp_hwif = *hwif;
++
++ /* restore hwif data to pristine status */
++ init_hwif_data(hwif, index);
++ init_hwif_default(hwif, index);
++
++ ide_hwif_restore(hwif, &tmp_hwif);
++
++abort:
++ spin_unlock_irq(&ide_lock);
++ up(&ide_cfg_sem);
++}
++
++EXPORT_SYMBOL(ide_unregister);
++
++
++/**
++ * ide_setup_ports - set up IDE interface ports
++ * @hw: register descriptions
++ * @base: base register
++ * @offsets: table of register offsets
++ * @ctrl: control register
++ * @ack_irq: IRQ ack
++ * @irq: interrupt lie
++ *
++ * Setup hw_regs_t structure described by parameters. You
++ * may set up the hw structure yourself OR use this routine to
++ * do it for you. This is basically a helper
++ *
++ */
++
++void ide_setup_ports ( hw_regs_t *hw,
++ unsigned long base, int *offsets,
++ unsigned long ctrl, unsigned long intr,
++ ide_ack_intr_t *ack_intr,
++/*
++ * ide_io_ops_t *iops,
++ */
++ int irq)
++{
++ int i;
++
++ memset(hw, 0, sizeof(hw_regs_t));
++ for (i = 0; i < IDE_NR_PORTS; i++) {
++ if (offsets[i] == -1) {
++ switch(i) {
++ case IDE_CONTROL_OFFSET:
++ hw->io_ports[i] = ctrl;
++ break;
++#if defined(CONFIG_AMIGA) || defined(CONFIG_MAC)
++ case IDE_IRQ_OFFSET:
++ hw->io_ports[i] = intr;
++ break;
++#endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */
++ default:
++ hw->io_ports[i] = 0;
++ break;
++ }
++ } else {
++ hw->io_ports[i] = base + offsets[i];
++ }
++ }
++ hw->irq = irq;
++ hw->dma = NO_DMA;
++ hw->ack_intr = ack_intr;
++/*
++ * hw->iops = iops;
++ */
++}
++
++/**
++ * ide_register_hw_with_fixup - register IDE interface
++ * @hw: hardware registers
++ * @hwifp: pointer to returned hwif
++ * @fixup: fixup function
++ *
++ * Register an IDE interface, specifying exactly the registers etc.
++ * Set init=1 iff calling before probes have taken place.
++ *
++ * Returns -1 on error.
++ */
++
++int ide_register_hw_with_fixup(hw_regs_t *hw, ide_hwif_t **hwifp, void(*fixup)(ide_hwif_t *hwif))
++{
++ int index, retry = 1;
++ ide_hwif_t *hwif;
++
++ do {
++ for (index = 0; index < MAX_HWIFS; ++index) {
++ hwif = &ide_hwifs[index];
++ if (hwif->hw.io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
++ goto found;
++ }
++ for (index = 0; index < MAX_HWIFS; ++index) {
++ hwif = &ide_hwifs[index];
++ if (hwif->hold)
++ continue;
++ if ((!hwif->present && !hwif->mate && !initializing) ||
++ (!hwif->hw.io_ports[IDE_DATA_OFFSET] && initializing))
++ goto found;
++ }
++ for (index = 0; index < MAX_HWIFS; index++)
++ ide_unregister(index);
++ } while (retry--);
++ return -1;
++found:
++ if (hwif->present)
++ ide_unregister(index);
++ else if (!hwif->hold) {
++ init_hwif_data(hwif, index);
++ init_hwif_default(hwif, index);
++ }
++ if (hwif->present)
++ return -1;
++ memcpy(&hwif->hw, hw, sizeof(*hw));
++ memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
++ hwif->irq = hw->irq;
++ hwif->noprobe = 0;
++ hwif->chipset = hw->chipset;
++ hwif->gendev.parent = hw->dev;
++
++ if (!initializing) {
++ probe_hwif_init_with_fixup(hwif, fixup);
++ create_proc_ide_interfaces();
++ }
++
++ if (hwifp)
++ *hwifp = hwif;
++
++ return (initializing || hwif->present) ? index : -1;
++}
++
++EXPORT_SYMBOL(ide_register_hw_with_fixup);
++
++int ide_register_hw(hw_regs_t *hw, ide_hwif_t **hwifp)
++{
++ return ide_register_hw_with_fixup(hw, hwifp, NULL);
++}
++
++EXPORT_SYMBOL(ide_register_hw);
++
++/*
++ * Locks for IDE setting functionality
++ */
++
++DECLARE_MUTEX(ide_setting_sem);
++
++/**
++ * __ide_add_setting - add an ide setting option
++ * @drive: drive to use
++ * @name: setting name
++ * @rw: true if the function is read write
++ * @read_ioctl: function to call on read
++ * @write_ioctl: function to call on write
++ * @data_type: type of data
++ * @min: range minimum
++ * @max: range maximum
++ * @mul_factor: multiplication scale
++ * @div_factor: divison scale
++ * @data: private data field
++ * @set: setting
++ * @auto_remove: setting auto removal flag
++ *
++ * Removes the setting named from the device if it is present.
++ * The function takes the settings_lock to protect against
++ * parallel changes. This function must not be called from IRQ
++ * context. Returns 0 on success or -1 on failure.
++ *
++ * BUGS: This code is seriously over-engineered. There is also
++ * magic about how the driver specific features are setup. If
++ * a driver is attached we assume the driver settings are auto
++ * remove.
++ */
++
++static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
++{
++ ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
++
++ down(&ide_setting_sem);
++ while ((*p) && strcmp((*p)->name, name) < 0)
++ p = &((*p)->next);
++ if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
++ goto abort;
++ if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
++ goto abort;
++ strcpy(setting->name, name);
++ setting->rw = rw;
++ setting->read_ioctl = read_ioctl;
++ setting->write_ioctl = write_ioctl;
++ setting->data_type = data_type;
++ setting->min = min;
++ setting->max = max;
++ setting->mul_factor = mul_factor;
++ setting->div_factor = div_factor;
++ setting->data = data;
++ setting->set = set;
++
++ setting->next = *p;
++ if (auto_remove)
++ setting->auto_remove = 1;
++ *p = setting;
++ up(&ide_setting_sem);
++ return 0;
++abort:
++ up(&ide_setting_sem);
++ kfree(setting);
++ return -1;
++}
++
++int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
++{
++ return __ide_add_setting(drive, name, rw, read_ioctl, write_ioctl, data_type, min, max, mul_factor, div_factor, data, set, 1);
++}
++
++EXPORT_SYMBOL(ide_add_setting);
++
++/**
++ * __ide_remove_setting - remove an ide setting option
++ * @drive: drive to use
++ * @name: setting name
++ *
++ * Removes the setting named from the device if it is present.
++ * The caller must hold the setting semaphore.
++ */
++
++static void __ide_remove_setting (ide_drive_t *drive, char *name)
++{
++ ide_settings_t **p, *setting;
++
++ p = (ide_settings_t **) &drive->settings;
++
++ while ((*p) && strcmp((*p)->name, name))
++ p = &((*p)->next);
++ if ((setting = (*p)) == NULL)
++ return;
++
++ (*p) = setting->next;
++
++ kfree(setting->name);
++ kfree(setting);
++}
++
++/**
++ * ide_find_setting_by_ioctl - find a drive specific ioctl
++ * @drive: drive to scan
++ * @cmd: ioctl command to handle
++ *
++ * Scan's the device setting table for a matching entry and returns
++ * this or NULL if no entry is found. The caller must hold the
++ * setting semaphore
++ */
++
++static ide_settings_t *ide_find_setting_by_ioctl (ide_drive_t *drive, int cmd)
++{
++ ide_settings_t *setting = drive->settings;
++
++ while (setting) {
++ if (setting->read_ioctl == cmd || setting->write_ioctl == cmd)
++ break;
++ setting = setting->next;
++ }
++
++ return setting;
++}
++
++/**
++ * ide_find_setting_by_name - find a drive specific setting
++ * @drive: drive to scan
++ * @name: setting name
++ *
++ * Scan's the device setting table for a matching entry and returns
++ * this or NULL if no entry is found. The caller must hold the
++ * setting semaphore
++ */
++
++ide_settings_t *ide_find_setting_by_name (ide_drive_t *drive, char *name)
++{
++ ide_settings_t *setting = drive->settings;
++
++ while (setting) {
++ if (strcmp(setting->name, name) == 0)
++ break;
++ setting = setting->next;
++ }
++ return setting;
++}
++
++/**
++ * auto_remove_settings - remove driver specific settings
++ * @drive: drive
++ *
++ * Automatically remove all the driver specific settings for this
++ * drive. This function may sleep and must not be called from IRQ
++ * context. The caller must hold ide_setting_sem.
++ */
++
++static void auto_remove_settings (ide_drive_t *drive)
++{
++ ide_settings_t *setting;
++repeat:
++ setting = drive->settings;
++ while (setting) {
++ if (setting->auto_remove) {
++ __ide_remove_setting(drive, setting->name);
++ goto repeat;
++ }
++ setting = setting->next;
++ }
++}
++
++/**
++ * ide_read_setting - read an IDE setting
++ * @drive: drive to read from
++ * @setting: drive setting
++ *
++ * Read a drive setting and return the value. The caller
++ * must hold the ide_setting_sem when making this call.
++ *
++ * BUGS: the data return and error are the same return value
++ * so an error -EINVAL and true return of the same value cannot
++ * be told apart
++ */
++
++int ide_read_setting (ide_drive_t *drive, ide_settings_t *setting)
++{
++ int val = -EINVAL;
++ unsigned long flags;
++
++ if ((setting->rw & SETTING_READ)) {
++ spin_lock_irqsave(&ide_lock, flags);
++ switch(setting->data_type) {
++ case TYPE_BYTE:
++ val = *((u8 *) setting->data);
++ break;
++ case TYPE_SHORT:
++ val = *((u16 *) setting->data);
++ break;
++ case TYPE_INT:
++ case TYPE_INTA:
++ val = *((u32 *) setting->data);
++ break;
++ }
++ spin_unlock_irqrestore(&ide_lock, flags);
++ }
++ return val;
++}
++
++/**
++ * ide_spin_wait_hwgroup - wait for group
++ * @drive: drive in the group
++ *
++ * Wait for an IDE device group to go non busy and then return
++ * holding the ide_lock which guards the hwgroup->busy status
++ * and right to use it.
++ */
++
++int ide_spin_wait_hwgroup (ide_drive_t *drive)
++{
++ ide_hwgroup_t *hwgroup = HWGROUP(drive);
++ unsigned long timeout = jiffies + (3 * HZ);
++
++ spin_lock_irq(&ide_lock);
++
++ while (hwgroup->busy) {
++ unsigned long lflags;
++ spin_unlock_irq(&ide_lock);
++ local_irq_set(lflags);
++ if (time_after(jiffies, timeout)) {
++ local_irq_restore(lflags);
++ printk(KERN_ERR "%s: channel busy\n", drive->name);
++ return -EBUSY;
++ }
++ local_irq_restore(lflags);
++ spin_lock_irq(&ide_lock);
++ }
++ return 0;
++}
++
++EXPORT_SYMBOL(ide_spin_wait_hwgroup);
++
++/**
++ * ide_write_setting - read an IDE setting
++ * @drive: drive to read from
++ * @setting: drive setting
++ * @val: value
++ *
++ * Write a drive setting if it is possible. The caller
++ * must hold the ide_setting_sem when making this call.
++ *
++ * BUGS: the data return and error are the same return value
++ * so an error -EINVAL and true return of the same value cannot
++ * be told apart
++ *
++ * FIXME: This should be changed to enqueue a special request
++ * to the driver to change settings, and then wait on a sema for completion.
++ * The current scheme of polling is kludgy, though safe enough.
++ */
++
++int ide_write_setting (ide_drive_t *drive, ide_settings_t *setting, int val)
++{
++ int i;
++ u32 *p;
++
++ if (!capable(CAP_SYS_ADMIN))
++ return -EACCES;
++ if (!(setting->rw & SETTING_WRITE))
++ return -EPERM;
++ if (val < setting->min || val > setting->max)
++ return -EINVAL;
++ if (setting->set)
++ return setting->set(drive, val);
++ if (ide_spin_wait_hwgroup(drive))
++ return -EBUSY;
++ switch (setting->data_type) {
++ case TYPE_BYTE:
++ *((u8 *) setting->data) = val;
++ break;
++ case TYPE_SHORT:
++ *((u16 *) setting->data) = val;
++ break;
++ case TYPE_INT:
++ *((u32 *) setting->data) = val;
++ break;
++ case TYPE_INTA:
++ p = (u32 *) setting->data;
++ for (i = 0; i < 1 << PARTN_BITS; i++, p++)
++ *p = val;
++ break;
++ }
++ spin_unlock_irq(&ide_lock);
++ return 0;
++}
++
++static int set_io_32bit(ide_drive_t *drive, int arg)
++{
++ drive->io_32bit = arg;
++#ifdef CONFIG_BLK_DEV_DTC2278
++ if (HWIF(drive)->chipset == ide_dtc2278)
++ HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
++#endif /* CONFIG_BLK_DEV_DTC2278 */
++ return 0;
++}
++
++static int set_using_dma (ide_drive_t *drive, int arg)
++{
++#ifdef CONFIG_BLK_DEV_IDEDMA
++ if (!drive->id || !(drive->id->capability & 1))
++ return -EPERM;
++ if (HWIF(drive)->ide_dma_check == NULL)
++ return -EPERM;
++ if (arg) {
++ if (HWIF(drive)->ide_dma_check(drive)) return -EIO;
++ if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
++ } else {
++ if (__ide_dma_off(drive))
++ return -EIO;
++ }
++ return 0;
++#else
++ return -EPERM;
++#endif
++}
++
++static int set_pio_mode (ide_drive_t *drive, int arg)
++{
++ struct request rq;
++
++ if (!HWIF(drive)->tuneproc)
++ return -ENOSYS;
++ if (drive->special.b.set_tune)
++ return -EBUSY;
++ ide_init_drive_cmd(&rq);
++ drive->tune_req = (u8) arg;
++ drive->special.b.set_tune = 1;
++ (void) ide_do_drive_cmd(drive, &rq, ide_wait);
++ return 0;
++}
++
++static int set_xfer_rate (ide_drive_t *drive, int arg)
++{
++ int err = ide_wait_cmd(drive,
++ WIN_SETFEATURES, (u8) arg,
++ SETFEATURES_XFER, 0, NULL);
++
++ if (!err && arg) {
++ ide_set_xfer_rate(drive, (u8) arg);
++ ide_driveid_update(drive);
++ }
++ return err;
++}
++
++/**
++ * ide_add_generic_settings - generic ide settings
++ * @drive: drive being configured
++ *
++ * Add the generic parts of the system settings to the /proc files and
++ * ioctls for this IDE device. The caller must not be holding the
++ * ide_setting_sem.
++ */
++
++void ide_add_generic_settings (ide_drive_t *drive)
++{
++/*
++ * drive setting name read/write access read ioctl write ioctl data type min max mul_factor div_factor data pointer set function
++ */
++ __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, HDIO_GET_32BIT, HDIO_SET_32BIT, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
++ __ide_add_setting(drive, "keepsettings", SETTING_RW, HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0);
++ __ide_add_setting(drive, "nice1", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0);
++ __ide_add_setting(drive, "pio_mode", SETTING_WRITE, -1, HDIO_SET_PIO_MODE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0);
++ __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0);
++ __ide_add_setting(drive, "using_dma", SETTING_RW, HDIO_GET_DMA, HDIO_SET_DMA, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0);
++ __ide_add_setting(drive, "init_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
++ __ide_add_setting(drive, "current_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
++ __ide_add_setting(drive, "number", SETTING_RW, -1, -1, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0);
++}
++
++/**
++ * system_bus_clock - clock guess
++ *
++ * External version of the bus clock guess used by very old IDE drivers
++ * for things like VLB timings. Should not be used.
++ */
++
++int system_bus_clock (void)
++{
++ return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
++}
++
++EXPORT_SYMBOL(system_bus_clock);
++
++static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
++{
++ ide_drive_t *drive = dev->driver_data;
++ struct request rq;
++ struct request_pm_state rqpm;
++ ide_task_t args;
++
++ memset(&rq, 0, sizeof(rq));
++ memset(&rqpm, 0, sizeof(rqpm));
++ memset(&args, 0, sizeof(args));
++ rq.cmd_type = REQ_TYPE_PM_SUSPEND;
++ rq.special = &args;
++ rq.data = &rqpm;
++ rqpm.pm_step = ide_pm_state_start_suspend;
++ if (mesg.event == PM_EVENT_PRETHAW)
++ mesg.event = PM_EVENT_FREEZE;
++ rqpm.pm_state = mesg.event;
++
++ return ide_do_drive_cmd(drive, &rq, ide_wait);
++}
++
++static int generic_ide_resume(struct device *dev)
++{
++ ide_drive_t *drive = dev->driver_data;
++ struct request rq;
++ struct request_pm_state rqpm;
++ ide_task_t args;
++
++ memset(&rq, 0, sizeof(rq));
++ memset(&rqpm, 0, sizeof(rqpm));
++ memset(&args, 0, sizeof(args));
++ rq.cmd_type = REQ_TYPE_PM_RESUME;
++ rq.special = &args;
++ rq.data = &rqpm;
++ rqpm.pm_step = ide_pm_state_start_resume;
++ rqpm.pm_state = PM_EVENT_ON;
++
++ return ide_do_drive_cmd(drive, &rq, ide_head_wait);
++}
++
++int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
++ unsigned int cmd, unsigned long arg)
++{
++ ide_settings_t *setting;
++ ide_driver_t *drv;
++ int err = 0;
++ void __user *p = (void __user *)arg;
++
++ down(&ide_setting_sem);
++ if ((setting = ide_find_setting_by_ioctl(drive, cmd)) != NULL) {
++ if (cmd == setting->read_ioctl) {
++ err = ide_read_setting(drive, setting);
++ up(&ide_setting_sem);
++ return err >= 0 ? put_user(err, (long __user *)arg) : err;
++ } else {
++ if (bdev != bdev->bd_contains)
++ err = -EINVAL;
++ else
++ err = ide_write_setting(drive, setting, arg);
++ up(&ide_setting_sem);
++ return err;
++ }
++ }
++ up(&ide_setting_sem);
++
++ switch (cmd) {
++ case HDIO_OBSOLETE_IDENTITY:
++ case HDIO_GET_IDENTITY:
++ if (bdev != bdev->bd_contains)
++ return -EINVAL;
++ if (drive->id_read == 0)
++ return -ENOMSG;
++ if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
++ return -EFAULT;
++ return 0;
++
++ case HDIO_GET_NICE:
++ return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP |
++ drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP |
++ drive->nice0 << IDE_NICE_0 |
++ drive->nice1 << IDE_NICE_1 |
++ drive->nice2 << IDE_NICE_2,
++ (long __user *) arg);
++
++#ifdef CONFIG_IDE_TASK_IOCTL
++ case HDIO_DRIVE_TASKFILE:
++ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
++ return -EACCES;
++ switch(drive->media) {
++ case ide_disk:
++ return ide_taskfile_ioctl(drive, cmd, arg);
++ default:
++ return -ENOMSG;
++ }
++#endif /* CONFIG_IDE_TASK_IOCTL */
++
++ case HDIO_DRIVE_CMD:
++ if (!capable(CAP_SYS_RAWIO))
++ return -EACCES;
++ return ide_cmd_ioctl(drive, cmd, arg);
++
++ case HDIO_DRIVE_TASK:
++ if (!capable(CAP_SYS_RAWIO))
++ return -EACCES;
++ return ide_task_ioctl(drive, cmd, arg);
++
++ case HDIO_SCAN_HWIF:
++ {
++ hw_regs_t hw;
++ int args[3];
++ if (!capable(CAP_SYS_RAWIO)) return -EACCES;
++ if (copy_from_user(args, p, 3 * sizeof(int)))
++ return -EFAULT;
++ memset(&hw, 0, sizeof(hw));
++ ide_init_hwif_ports(&hw, (unsigned long) args[0],
++ (unsigned long) args[1], NULL);
++ hw.irq = args[2];
++ if (ide_register_hw(&hw, NULL) == -1)
++ return -EIO;
++ return 0;
++ }
++ case HDIO_UNREGISTER_HWIF:
++ if (!capable(CAP_SYS_RAWIO)) return -EACCES;
++ /* (arg > MAX_HWIFS) checked in function */
++ ide_unregister(arg);
++ return 0;
++ case HDIO_SET_NICE:
++ if (!capable(CAP_SYS_ADMIN)) return -EACCES;
++ if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
++ return -EPERM;
++ drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
++ drv = *(ide_driver_t **)bdev->bd_disk->private_data;
++ if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
++ drive->dsc_overlap = 0;
++ return -EPERM;
++ }
++ drive->nice1 = (arg >> IDE_NICE_1) & 1;
++ return 0;
++ case HDIO_DRIVE_RESET:
++ {
++ unsigned long flags;
++ if (!capable(CAP_SYS_ADMIN)) return -EACCES;
++
++ /*
++ * Abort the current command on the
++ * group if there is one, taking
++ * care not to allow anything else
++ * to be queued and to die on the
++ * spot if we miss one somehow
++ */
++
++ spin_lock_irqsave(&ide_lock, flags);
++
++ if (HWGROUP(drive)->resetting) {
++ spin_unlock_irqrestore(&ide_lock, flags);
++ return -EBUSY;
++ }
++
++ ide_abort(drive, "drive reset");
++
++ BUG_ON(HWGROUP(drive)->handler);
++
++ /* Ensure nothing gets queued after we
++ drop the lock. Reset will clear the busy */
++
++ HWGROUP(drive)->busy = 1;
++ spin_unlock_irqrestore(&ide_lock, flags);
++ (void) ide_do_reset(drive);
++
++ return 0;
++ }
++
++ case CDROMEJECT:
++ case CDROMCLOSETRAY:
++ return scsi_cmd_ioctl(file, bdev->bd_disk, cmd, p);
++
++ case HDIO_GET_BUSSTATE:
++ if (!capable(CAP_SYS_ADMIN))
++ return -EACCES;
++ if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
++ return -EFAULT;
++ return 0;
++
++ case HDIO_SET_BUSSTATE:
++ if (!capable(CAP_SYS_ADMIN))
++ return -EACCES;
++ if (HWIF(drive)->busproc)
++ return HWIF(drive)->busproc(drive, (int)arg);
++ return -EOPNOTSUPP;
++ default:
++ return -EINVAL;
++ }
++}
++
++EXPORT_SYMBOL(generic_ide_ioctl);
++
++/*
++ * stridx() returns the offset of c within s,
++ * or -1 if c is '\0' or not found within s.
++ */
++static int __init stridx (const char *s, char c)
++{
++ char *i = strchr(s, c);
++ return (i && c) ? i - s : -1;
++}
++
++/*
++ * match_parm() does parsing for ide_setup():
++ *
++ * 1. the first char of s must be '='.
++ * 2. if the remainder matches one of the supplied keywords,
++ * the index (1 based) of the keyword is negated and returned.
++ * 3. if the remainder is a series of no more than max_vals numbers
++ * separated by commas, the numbers are saved in vals[] and a
++ * count of how many were saved is returned. Base10 is assumed,
++ * and base16 is allowed when prefixed with "0x".
++ * 4. otherwise, zero is returned.
++ */
++static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
++{
++ static const char *decimal = "0123456789";
++ static const char *hex = "0123456789abcdef";
++ int i, n;
++
++ if (*s++ == '=') {
++ /*
++ * Try matching against the supplied keywords,
++ * and return -(index+1) if we match one
++ */
++ if (keywords != NULL) {
++ for (i = 0; *keywords != NULL; ++i) {
++ if (!strcmp(s, *keywords++))
++ return -(i+1);
++ }
++ }
++ /*
++ * Look for a series of no more than "max_vals"
++ * numeric values separated by commas, in base10,
++ * or base16 when prefixed with "0x".
++ * Return a count of how many were found.
++ */
++ for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
++ vals[n] = i;
++ while ((i = stridx(decimal, *++s)) >= 0)
++ vals[n] = (vals[n] * 10) + i;
++ if (*s == 'x' && !vals[n]) {
++ while ((i = stridx(hex, *++s)) >= 0)
++ vals[n] = (vals[n] * 0x10) + i;
++ }
++ if (++n == max_vals)
++ break;
++ if (*s == ',' || *s == ';')
++ ++s;
++ }
++ if (!*s)
++ return n;
++ }
++ return 0; /* zero = nothing matched */
++}
++
++#ifdef CONFIG_BLK_DEV_ALI14XX
++static int __initdata probe_ali14xx;
++extern int ali14xx_init(void);
++#endif
++#ifdef CONFIG_BLK_DEV_UMC8672
++static int __initdata probe_umc8672;
++extern int umc8672_init(void);
++#endif
++#ifdef CONFIG_BLK_DEV_DTC2278
++static int __initdata probe_dtc2278;
++extern int dtc2278_init(void);
++#endif
++#ifdef CONFIG_BLK_DEV_HT6560B
++static int __initdata probe_ht6560b;
++extern int ht6560b_init(void);
++#endif
++#ifdef CONFIG_BLK_DEV_QD65XX
++static int __initdata probe_qd65xx;
++extern int qd65xx_init(void);
++#endif
++
++static int __initdata is_chipset_set[MAX_HWIFS];
++
++/*
++ * ide_setup() gets called VERY EARLY during initialization,
++ * to handle kernel "command line" strings beginning with "hdx=" or "ide".
++ *
++ * Remember to update Documentation/ide.txt if you change something here.
++ */
++static int __init ide_setup(char *s)
++{
++ int i, vals[3];
++ ide_hwif_t *hwif;
++ ide_drive_t *drive;
++ unsigned int hw, unit;
++ const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
++ const char max_hwif = '0' + (MAX_HWIFS - 1);
++
++
++ if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */
++ return 0; /* driver and not us */
++
++ if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
++ return 0;
++
++ printk(KERN_INFO "ide_setup: %s", s);
++ init_ide_data ();
++
++#ifdef CONFIG_BLK_DEV_IDEDOUBLER
++ if (!strcmp(s, "ide=doubler")) {
++ extern int ide_doubler;
++
++ printk(" : Enabled support for IDE doublers\n");
++ ide_doubler = 1;
++ return 1;
++ }
++#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
++
++ if (!strcmp(s, "ide=nodma")) {
++ printk(" : Prevented DMA\n");
++ noautodma = 1;
++ return 1;
++ }
++
++#ifdef CONFIG_BLK_DEV_IDEPCI
++ if (!strcmp(s, "ide=reverse")) {
++ ide_scan_direction = 1;
++ printk(" : Enabled support for IDE inverse scan order.\n");
++ return 1;
++ }
++#endif /* CONFIG_BLK_DEV_IDEPCI */
++
++ /*
++ * Look for drive options: "hdx="
++ */
++ if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
++ const char *hd_words[] = {
++ "none", "noprobe", "nowerr", "cdrom", "serialize",
++ "autotune", "noautotune", "minus8", "swapdata", "bswap",
++ "noflush", "remap", "remap63", "scsi", NULL };
++ unit = s[2] - 'a';
++ hw = unit / MAX_DRIVES;
++ unit = unit % MAX_DRIVES;
++ hwif = &ide_hwifs[hw];
++ drive = &hwif->drives[unit];
++ if (strncmp(s + 4, "ide-", 4) == 0) {
++ strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
++ goto done;
++ }
++ switch (match_parm(&s[3], hd_words, vals, 3)) {
++ case -1: /* "none" */
++ case -2: /* "noprobe" */
++ drive->noprobe = 1;
++ goto done;
++ case -3: /* "nowerr" */
++ drive->bad_wstat = BAD_R_STAT;
++ hwif->noprobe = 0;
++ goto done;
++ case -4: /* "cdrom" */
++ drive->present = 1;
++ drive->media = ide_cdrom;
++ /* an ATAPI device ignores DRDY */
++ drive->ready_stat = 0;
++ hwif->noprobe = 0;
++ goto done;
++ case -5: /* "serialize" */
++ printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
++ goto do_serialize;
++ case -6: /* "autotune" */
++ drive->autotune = IDE_TUNE_AUTO;
++ goto obsolete_option;
++ case -7: /* "noautotune" */
++ drive->autotune = IDE_TUNE_NOAUTO;
++ goto obsolete_option;
++ case -9: /* "swapdata" */
++ case -10: /* "bswap" */
++ drive->bswap = 1;
++ goto done;
++ case -11: /* noflush */
++ drive->noflush = 1;
++ goto done;
++ case -12: /* "remap" */
++ drive->remap_0_to_1 = 1;
++ goto done;
++ case -13: /* "remap63" */
++ drive->sect0 = 63;
++ goto done;
++ case -14: /* "scsi" */
++ drive->scsi = 1;
++ goto done;
++ case 3: /* cyl,head,sect */
++ drive->media = ide_disk;
++ drive->ready_stat = READY_STAT;
++ drive->cyl = drive->bios_cyl = vals[0];
++ drive->head = drive->bios_head = vals[1];
++ drive->sect = drive->bios_sect = vals[2];
++ drive->present = 1;
++ drive->forced_geom = 1;
++ hwif->noprobe = 0;
++ goto done;
++ default:
++ goto bad_option;
++ }
++ }
++
++ if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
++ goto bad_option;
++ /*
++ * Look for bus speed option: "idebus="
++ */
++ if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
++ if (match_parm(&s[6], NULL, vals, 1) != 1)
++ goto bad_option;
++ if (vals[0] >= 20 && vals[0] <= 66) {
++ idebus_parameter = vals[0];
++ } else
++ printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
++ goto done;
++ }
++ /*
++ * Look for interface options: "idex="
++ */
++ if (s[3] >= '0' && s[3] <= max_hwif) {
++ /*
++ * Be VERY CAREFUL changing this: note hardcoded indexes below
++ * (-8, -9, -10) are reserved to ease the hardcoding.
++ */
++ static const char *ide_words[] = {
++ "noprobe", "serialize", "autotune", "noautotune",
++ "reset", "dma", "ata66", "minus8", "minus9",
++ "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
++ "dtc2278", "umc8672", "ali14xx", NULL };
++ hw = s[3] - '0';
++ hwif = &ide_hwifs[hw];
++ i = match_parm(&s[4], ide_words, vals, 3);
++
++ /*
++ * Cryptic check to ensure chipset not already set for hwif.
++ * Note: we can't depend on hwif->chipset here.
++ */
++ if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
++ /* chipset already specified */
++ if (is_chipset_set[hw])
++ goto bad_option;
++ if (i > -18 && i <= -11) {
++ /* these drivers are for "ide0=" only */
++ if (hw != 0)
++ goto bad_hwif;
++ /* chipset already specified for 2nd port */
++ if (is_chipset_set[hw+1])
++ goto bad_option;
++ }
++ is_chipset_set[hw] = 1;
++ printk("\n");
++ }
++
++ switch (i) {
++#ifdef CONFIG_BLK_DEV_ALI14XX
++ case -17: /* "ali14xx" */
++ probe_ali14xx = 1;
++ goto done;
++#endif
++#ifdef CONFIG_BLK_DEV_UMC8672
++ case -16: /* "umc8672" */
++ probe_umc8672 = 1;
++ goto done;
++#endif
++#ifdef CONFIG_BLK_DEV_DTC2278
++ case -15: /* "dtc2278" */
++ probe_dtc2278 = 1;
++ goto done;
++#endif
++#ifdef CONFIG_BLK_DEV_CMD640
++ case -14: /* "cmd640_vlb" */
++ {
++ extern int cmd640_vlb; /* flag for cmd640.c */
++ cmd640_vlb = 1;
++ goto done;
++ }
++#endif
++#ifdef CONFIG_BLK_DEV_HT6560B
++ case -13: /* "ht6560b" */
++ probe_ht6560b = 1;
++ goto done;
++#endif
++#ifdef CONFIG_BLK_DEV_QD65XX
++ case -12: /* "qd65xx" */
++ probe_qd65xx = 1;
++ goto done;
++#endif
++#ifdef CONFIG_BLK_DEV_4DRIVES
++ case -11: /* "four" drives on one set of ports */
++ {
++ ide_hwif_t *mate = &ide_hwifs[hw^1];
++ mate->drives[0].select.all ^= 0x20;
++ mate->drives[1].select.all ^= 0x20;
++ hwif->chipset = mate->chipset = ide_4drives;
++ mate->irq = hwif->irq;
++ memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
++ goto do_serialize;
++ }
++#endif /* CONFIG_BLK_DEV_4DRIVES */
++ case -10: /* minus10 */
++ case -9: /* minus9 */
++ case -8: /* minus8 */
++ goto bad_option;
++ case -7: /* ata66 */
++#ifdef CONFIG_BLK_DEV_IDEPCI
++ hwif->udma_four = 1;
++ goto obsolete_option;
++#else
++ goto bad_hwif;
++#endif
++ case -6: /* dma */
++ hwif->autodma = 1;
++ goto obsolete_option;
++ case -5: /* "reset" */
++ hwif->reset = 1;
++ goto obsolete_option;
++ case -4: /* "noautotune" */
++ hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
++ hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
++ goto obsolete_option;
++ case -3: /* "autotune" */
++ hwif->drives[0].autotune = IDE_TUNE_AUTO;
++ hwif->drives[1].autotune = IDE_TUNE_AUTO;
++ goto obsolete_option;
++ case -2: /* "serialize" */
++ do_serialize:
++ hwif->mate = &ide_hwifs[hw^1];
++ hwif->mate->mate = hwif;
++ hwif->serialized = hwif->mate->serialized = 1;
++ goto obsolete_option;
++
++ case -1: /* "noprobe" */
++ hwif->noprobe = 1;
++ goto done;
++
++ case 1: /* base */
++ vals[1] = vals[0] + 0x206; /* default ctl */
++ case 2: /* base,ctl */
++ vals[2] = 0; /* default irq = probe for it */
++ case 3: /* base,ctl,irq */
++ hwif->hw.irq = vals[2];
++ ide_init_hwif_ports(&hwif->hw, (unsigned long) vals[0], (unsigned long) vals[1], &hwif->irq);
++ memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
++ hwif->irq = vals[2];
++ hwif->noprobe = 0;
++ hwif->chipset = ide_forced;
++ goto obsolete_option;
++
++ case 0: goto bad_option;
++ default:
++ printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
++ return 1;
++ }
++ }
++bad_option:
++ printk(" -- BAD OPTION\n");
++ return 1;
++obsolete_option:
++ printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
++ return 1;
++bad_hwif:
++ printk("-- NOT SUPPORTED ON ide%d", hw);
++done:
++ printk("\n");
++ return 1;
++}
++
++extern void pnpide_init(void);
++extern void h8300_ide_init(void);
++
++/*
++ * probe_for_hwifs() finds/initializes "known" IDE interfaces
++ */
++static void __init probe_for_hwifs (void)
++{
++#ifdef CONFIG_BLK_DEV_IDEPCI
++ ide_scan_pcibus(ide_scan_direction);
++#endif /* CONFIG_BLK_DEV_IDEPCI */
++
++#ifdef CONFIG_ETRAX_IDE
++ {
++ extern void init_e100_ide(void);
++ init_e100_ide();
++ }
++#endif /* CONFIG_ETRAX_IDE */
++#ifdef CONFIG_BLK_DEV_CMD640
++ {
++ extern void ide_probe_for_cmd640x(void);
++ ide_probe_for_cmd640x();
++ }
++#endif /* CONFIG_BLK_DEV_CMD640 */
++#ifdef CONFIG_BLK_DEV_IDE_PMAC
++ {
++ extern void pmac_ide_probe(void);
++ pmac_ide_probe();
++ }
++#endif /* CONFIG_BLK_DEV_IDE_PMAC */
++#ifdef CONFIG_BLK_DEV_GAYLE
++ {
++ extern void gayle_init(void);
++ gayle_init();
++ }
++#endif /* CONFIG_BLK_DEV_GAYLE */
++#ifdef CONFIG_BLK_DEV_FALCON_IDE
++ {
++ extern void falconide_init(void);
++ falconide_init();
++ }
++#endif /* CONFIG_BLK_DEV_FALCON_IDE */
++#ifdef CONFIG_BLK_DEV_MAC_IDE
++ {
++ extern void macide_init(void);
++ macide_init();
++ }
++#endif /* CONFIG_BLK_DEV_MAC_IDE */
++#ifdef CONFIG_BLK_DEV_Q40IDE
++ {
++ extern void q40ide_init(void);
++ q40ide_init();
++ }
++#endif /* CONFIG_BLK_DEV_Q40IDE */
++#ifdef CONFIG_BLK_DEV_BUDDHA
++ {
++ extern void buddha_init(void);
++ buddha_init();
++ }
++#endif /* CONFIG_BLK_DEV_BUDDHA */
++#ifdef CONFIG_BLK_DEV_IDEPNP
++ pnpide_init();
++#endif
++#ifdef CONFIG_H8300
++ h8300_ide_init();
++#endif
++}
++
++void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
++{
++#ifdef CONFIG_PROC_FS
++ ide_add_proc_entries(drive->proc, driver->proc, drive);
++#endif
++}
++
++EXPORT_SYMBOL(ide_register_subdriver);
++
++/**
++ * ide_unregister_subdriver - disconnect drive from driver
++ * @drive: drive to unplug
++ * @driver: driver
++ *
++ * Disconnect a drive from the driver it was attached to and then
++ * clean up the various proc files and other objects attached to it.
++ *
++ * Takes ide_setting_sem and ide_lock.
++ * Caller must hold none of the locks.
++ */
++
++void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver)
++{
++ unsigned long flags;
++
++ down(&ide_setting_sem);
++ spin_lock_irqsave(&ide_lock, flags);
++#ifdef CONFIG_PROC_FS
++ ide_remove_proc_entries(drive->proc, driver->proc);
++#endif
++ auto_remove_settings(drive);
++ spin_unlock_irqrestore(&ide_lock, flags);
++ up(&ide_setting_sem);
++}
++
++EXPORT_SYMBOL(ide_unregister_subdriver);
++
++/*
++ * Probe module
++ */
++
++EXPORT_SYMBOL(ide_lock);
++
++static int ide_bus_match(struct device *dev, struct device_driver *drv)
++{
++ return 1;
++}
++
++static char *media_string(ide_drive_t *drive)
++{
++ switch (drive->media) {
++ case ide_disk:
++ return "disk";
++ case ide_cdrom:
++ return "cdrom";
++ case ide_tape:
++ return "tape";
++ case ide_floppy:
++ return "floppy";
++ default:
++ return "UNKNOWN";
++ }
++}
++
++static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ ide_drive_t *drive = to_ide_device(dev);
++ return sprintf(buf, "%s\n", media_string(drive));
++}
++
++static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ ide_drive_t *drive = to_ide_device(dev);
++ return sprintf(buf, "%s\n", drive->name);
++}
++
++static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ ide_drive_t *drive = to_ide_device(dev);
++ return sprintf(buf, "ide:m-%s\n", media_string(drive));
++}
++
++static struct device_attribute ide_dev_attrs[] = {
++ __ATTR_RO(media),
++ __ATTR_RO(drivename),
++ __ATTR_RO(modalias),
++ __ATTR_NULL
++};
++
++static int ide_uevent(struct device *dev, char **envp, int num_envp,
++ char *buffer, int buffer_size)
++{
++ ide_drive_t *drive = to_ide_device(dev);
++ int i = 0;
++ int length = 0;
++
++ add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
++ "MEDIA=%s", media_string(drive));
++ add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
++ "DRIVENAME=%s", drive->name);
++ add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
++ "MODALIAS=ide:m-%s", media_string(drive));
++ envp[i] = NULL;
++ return 0;
++}
++
++static int generic_ide_probe(struct device *dev)
++{
++ ide_drive_t *drive = to_ide_device(dev);
++ ide_driver_t *drv = to_ide_driver(dev->driver);
++
++ return drv->probe ? drv->probe(drive) : -ENODEV;
++}
++
++static int generic_ide_remove(struct device *dev)
++{
++ ide_drive_t *drive = to_ide_device(dev);
++ ide_driver_t *drv = to_ide_driver(dev->driver);
++
++ if (drv->remove)
++ drv->remove(drive);
++
++ return 0;
++}
++
++static void generic_ide_shutdown(struct device *dev)
++{
++ ide_drive_t *drive = to_ide_device(dev);
++ ide_driver_t *drv = to_ide_driver(dev->driver);
++
++ if (dev->driver && drv->shutdown)
++ drv->shutdown(drive);
++}
++
++struct bus_type ide_bus_type = {
++ .name = "ide",
++ .match = ide_bus_match,
++ .uevent = ide_uevent,
++ .probe = generic_ide_probe,
++ .remove = generic_ide_remove,
++ .shutdown = generic_ide_shutdown,
++ .dev_attrs = ide_dev_attrs,
++ .suspend = generic_ide_suspend,
++ .resume = generic_ide_resume,
++};
++
++EXPORT_SYMBOL_GPL(ide_bus_type);
++
++/*
++ * This is gets invoked once during initialization, to set *everything* up
++ */
++static int __init ide_init(void)
++{
++ int ret;
++
++ printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
++ system_bus_speed = ide_system_bus_speed();
++
++ ret = bus_register(&ide_bus_type);
++ if (ret < 0) {
++ printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
++ return ret;
++ }
++
++ init_ide_data();
++
++#ifdef CONFIG_PROC_FS
++ proc_ide_root = proc_mkdir("ide", NULL);
++#endif
++
++#ifdef CONFIG_BLK_DEV_ALI14XX
++ if (probe_ali14xx)
++ (void)ali14xx_init();
++#endif
++#ifdef CONFIG_BLK_DEV_UMC8672
++ if (probe_umc8672)
++ (void)umc8672_init();
++#endif
++#ifdef CONFIG_BLK_DEV_DTC2278
++ if (probe_dtc2278)
++ (void)dtc2278_init();
++#endif
++#ifdef CONFIG_BLK_DEV_HT6560B
++ if (probe_ht6560b)
++ (void)ht6560b_init();
++#endif
++#ifdef CONFIG_BLK_DEV_QD65XX
++ if (probe_qd65xx)
++ (void)qd65xx_init();
++#endif
++
++ initializing = 1;
++ /* Probe for special PCI and other "known" interface chipsets. */
++ probe_for_hwifs();
++ initializing = 0;
++
++#ifdef CONFIG_PROC_FS
++ proc_ide_create();
++#endif
++ return 0;
++}
++
++#ifdef MODULE
++static char *options = NULL;
++module_param(options, charp, 0);
++MODULE_LICENSE("GPL");
++
++static void __init parse_options (char *line)
++{
++ char *next = line;
++
++ if (line == NULL || !*line)
++ return;
++ while ((line = next) != NULL) {
++ if ((next = strchr(line,' ')) != NULL)
++ *next++ = 0;
++ if (!ide_setup(line))
++ printk (KERN_INFO "Unknown option '%s'\n", line);
++ }
++}
++
++int __init init_module (void)
++{
++ parse_options(options);
++ return ide_init();
++}
++
++void cleanup_module (void)
++{
++ int index;
++
++ for (index = 0; index < MAX_HWIFS; ++index)
++ ide_unregister(index);
++
++#ifdef CONFIG_PROC_FS
++ proc_ide_destroy();
++#endif
++
++ bus_unregister(&ide_bus_type);
++}
++
++#else /* !MODULE */
++
++__setup("", ide_setup);
++
++module_init(ide_init);
++
++#endif /* MODULE */
+diff -purN linux.old/drivers/ide/Kconfig linux.dev/drivers/ide/Kconfig
+--- linux.old/drivers/ide/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux.dev/drivers/ide/Kconfig 2007-04-09 01:15:27.570515264 +0200
+@@ -925,6 +925,14 @@ config BLK_DEV_MPC8xx_IDE
+
+ If unsure, say N.
+
++config BLK_DEV_MAGICBOX_IDE
++ bool "MagicBox 2.0 CF IDE support"
++ depends on 4xx && IDE
++ help
++ This option provides support for IDE on MagicBox 2.0 boards.
++
++ If unsure, say N.
++
+ choice
+ prompt "Type of MPC8xx IDE interface"
+ depends on BLK_DEV_MPC8xx_IDE
+diff -purN linux.old/drivers/ide/Makefile linux.dev/drivers/ide/Makefile
+--- linux.old/drivers/ide/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux.dev/drivers/ide/Makefile 2007-04-09 00:23:29.332559488 +0200
+@@ -36,6 +36,7 @@ ide-core-$(CONFIG_BLK_DEV_Q40IDE) += leg
+ # built-in only drivers from ppc/
+ ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
+ ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
++ide-core-$(CONFIG_BLK_DEV_MAGICBOX_IDE) += ppc/magicbox_ide.o
+
+ # built-in only drivers from h8300/
+ ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
+diff -purN linux.old/drivers/ide/ppc/magicbox_ide.c linux.dev/drivers/ide/ppc/magicbox_ide.c
+--- linux.old/drivers/ide/ppc/magicbox_ide.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/ide/ppc/magicbox_ide.c 2007-04-09 01:25:39.119545680 +0200
+@@ -0,0 +1,149 @@
++/* Driver for MagicBox 2.0 onboard CompactFlash adapter.
++ * Written by Wojtek Kaniewski <wojtekka@toxygen.net>
++ *
++ * GNU General Public License.
++ */
++
++#include <linux/types.h>
++#include <linux/mm.h>
++#include <linux/interrupt.h>
++#include <linux/blkdev.h>
++#include <linux/hdreg.h>
++#include <linux/ide.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++
++
++#define UIC0_PR 0xc4
++#define UIC0_TR 0xc5
++#define IRQ 25
++
++static int ide_offsets[IDE_NR_PORTS] = {0, 2, 4, 6, 8, 10, 12, 14, -1, -1};
++
++static u8 magicbox_ide_inb (unsigned long port)
++{
++ return (u8) (readw((void __iomem *) port) >> 8) & 255;
++}
++
++static u16 magicbox_ide_inw (unsigned long port)
++{
++ return (u16) readw((void __iomem *) port);
++}
++
++static void magicbox_ide_insw (unsigned long port, void *addr, u32 count)
++{
++ u16 *ptr;
++
++ for (ptr = addr; count--; ptr++)
++ *ptr = readw((void __iomem *) port);
++}
++
++static u32 magicbox_ide_inl (unsigned long port)
++{
++ return (u32) readl((void __iomem *) port);
++}
++
++static void magicbox_ide_insl (unsigned long port, void *addr, u32 count)
++{
++ u32 *ptr;
++
++ for (ptr = addr; count--; ptr++)
++ *ptr = readl((void __iomem *) port);
++}
++
++static void magicbox_ide_outb (u8 value, unsigned long port)
++{
++ writew(value << 8, (void __iomem *) port);
++}
++
++static void magicbox_ide_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
++{
++ writew(value << 8, (void __iomem *) port);
++}
++
++static void magicbox_ide_outw (u16 value, unsigned long port)
++{
++ writew(value, (void __iomem *) port);
++}
++
++static void magicbox_ide_outsw (unsigned long port, void *addr, u32 count)
++{
++ u16 *ptr;
++
++ for (ptr = addr; count--; ptr++)
++ writew(*ptr, (void __iomem *) port);
++}
++
++static void magicbox_ide_outl (u32 value, unsigned long port)
++{
++ writel(value, (void __iomem *) port);
++}
++
++static void magicbox_ide_outsl (unsigned long port, void *addr, u32 count)
++{
++ u32 *ptr;
++
++ for (ptr = addr; count--; ptr++)
++ writel(*ptr, (void __iomem *) port);
++}
++
++
++static void __init ide_magicbox_register(unsigned long addr,
++ unsigned long caddr, int irq)
++{
++ hw_regs_t hw;
++ ide_hwif_t *hwif;
++
++ memset(&hw, 0, sizeof(hw));
++ ide_setup_ports(&hw, addr, ide_offsets, caddr + 12, 0, NULL,irq);
++
++ if (ide_register_hw(&hw, &hwif) != -1)
++ {
++ printk(KERN_NOTICE "magicbox-ide: Registered IDE-CF driver\n");
++ hwif->mmio = 2;
++ hwif->drives[0].unmask = 1;
++ hwif->OUTB = magicbox_ide_outb;
++ hwif->OUTBSYNC = magicbox_ide_outbsync;
++ hwif->OUTW = magicbox_ide_outw;
++ hwif->OUTL = magicbox_ide_outl;
++ hwif->OUTSW = magicbox_ide_outsw;
++ hwif->OUTSL = magicbox_ide_outsl;
++ hwif->INB = magicbox_ide_inb;
++ hwif->INW = magicbox_ide_inw;
++ hwif->INL = magicbox_ide_inl;
++ hwif->INSW = magicbox_ide_insw;
++ hwif->INSL = magicbox_ide_insl;
++ }
++}
++
++void __init ide_magicbox_init(void)
++{
++ volatile u16 *addr;
++ volatile u16 *caddr;
++
++ /* Turn on PerWE instead of PCIsomething */
++ mtdcr(DCRN_CPC0_PCI_BASE, mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
++
++ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
++ mtdcr(DCRN_EBC_BASE, 1);
++ mtdcr(DCRN_EBC_BASE + 1, 0xff11a000);
++ mtdcr(DCRN_EBC_BASE, 0x11);
++ mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
++
++ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
++ mtdcr(DCRN_EBC_BASE, 2);
++ mtdcr(DCRN_EBC_BASE + 1, 0xff21a000);
++ mtdcr(DCRN_EBC_BASE, 0x12);
++ mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
++
++ /* Remap physical address space */
++ addr = ioremap_nocache(0xff100000, 4096);
++ caddr = ioremap_nocache(0xff200000, 4096);
++
++ /* Set interrupt to low-to-high-edge-triggered */
++ mtdcr(UIC0_TR, mfdcr(UIC0_TR) & ~(0x80000000L >> IRQ));
++ mtdcr(UIC0_PR, mfdcr(UIC0_PR) | (0x80000000L >> IRQ));
++
++ ide_magicbox_register((unsigned long)addr, (unsigned long)caddr, IRQ);
++}
++
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 18:41:02 +0000