diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/ramips/files/drivers/net/ramips_esw.c | 55 |
1 files changed, 31 insertions, 24 deletions
diff --git a/target/linux/ramips/files/drivers/net/ramips_esw.c b/target/linux/ramips/files/drivers/net/ramips_esw.c index df0873e67..18008919c 100644 --- a/target/linux/ramips/files/drivers/net/ramips_esw.c +++ b/target/linux/ramips/files/drivers/net/ramips_esw.c @@ -45,20 +45,18 @@ ramips_esw_rr(struct rt305x_esw *esw, unsigned reg) return __raw_readl(esw->base + reg); } -u32 +static u32 mii_mgr_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register, u32 write_data) { - unsigned long volatile t_start = jiffies; + unsigned long t_start = jiffies; int ret = 0; - while(1) - { + while (1) { if (!(ramips_esw_rr(esw, RT305X_ESW_REG_PCR1) & RT305X_ESW_PCR1_WT_DONE)) break; - if(time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) - { + if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) { ret = 1; goto out; } @@ -72,19 +70,18 @@ mii_mgr_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register, RT305X_ESW_REG_PCR0); t_start = jiffies; - while(1) - { + while (1) { if (ramips_esw_rr(esw, RT305X_ESW_REG_PCR1) & RT305X_ESW_PCR1_WT_DONE) break; - if(time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) - { + + if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) { ret = 1; break; } } out: - if(ret) + if (ret) printk(KERN_ERR "ramips_eth: MDIO timeout\n"); return ret; } @@ -109,20 +106,30 @@ rt305x_esw_hw_init(struct rt305x_esw *esw) ramips_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA); mii_mgr_write(esw, 0, 31, 0x8000); - for(i = 0; i < 5; i++) - { - mii_mgr_write(esw, i, 0, 0x3100); //TX10 waveform coefficient - mii_mgr_write(esw, i, 26, 0x1601); //TX10 waveform coefficient - mii_mgr_write(esw, i, 29, 0x7058); //TX100/TX10 AD/DA current bias - mii_mgr_write(esw, i, 30, 0x0018); //TX100 slew rate control + for (i = 0; i < 5; i++) { + /* TX10 waveform coefficient */ + mii_mgr_write(esw, i, 0, 0x3100); + /* TX10 waveform coefficient */ + mii_mgr_write(esw, i, 26, 0x1601); + /* TX100/TX10 AD/DA current bias */ + mii_mgr_write(esw, i, 29, 0x7058); + /* TX100 slew rate control */ + mii_mgr_write(esw, i, 30, 0x0018); } + /* PHY IOT */ - mii_mgr_write(esw, 0, 31, 0x0); //select global register - mii_mgr_write(esw, 0, 22, 0x052f); //tune TP_IDL tail and head waveform - mii_mgr_write(esw, 0, 17, 0x0fe0); //set TX10 signal amplitude threshold to minimum - mii_mgr_write(esw, 0, 18, 0x40ba); //set squelch amplitude to higher threshold - mii_mgr_write(esw, 0, 14, 0x65); //longer TP_IDL tail length - mii_mgr_write(esw, 0, 31, 0x8000); //select local register + /* select global register */ + mii_mgr_write(esw, 0, 31, 0x0); + /* tune TP_IDL tail and head waveform */ + mii_mgr_write(esw, 0, 22, 0x052f); + /* set TX10 signal amplitude threshold to minimum */ + mii_mgr_write(esw, 0, 17, 0x0fe0); + /* set squelch amplitude to higher threshold */ + mii_mgr_write(esw, 0, 18, 0x40ba); + /* longer TP_IDL tail length */ + mii_mgr_write(esw, 0, 14, 0x65); + /* select local register */ + mii_mgr_write(esw, 0, 31, 0x8000); /* set default vlan */ ramips_esw_wr(esw, 0x2001, RT305X_ESW_REG_VLANI(0)); @@ -147,7 +154,7 @@ rt305x_esw_probe(struct platform_device *pdev) return -ENOMEM; } - esw = kzalloc(sizeof (struct rt305x_esw), GFP_KERNEL); + esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL); if (!esw) { dev_err(&pdev->dev, "no memory for private data\n"); return -ENOMEM; |