diff options
Diffstat (limited to 'target/linux/ramips/files/arch/mips/ralink')
4 files changed, 169 insertions, 2 deletions
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 3e5824216..3149af4c8 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -76,6 +76,11 @@ config RT305X_MACH_V22RW_2X2 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_WL351 + bool "Sitecom WL-351 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_WCR150GN bool "Sparklan WCR-150GN support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 5da73155f..2778f54f0 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -28,4 +28,4 @@ obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o - +obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c index 5dfbddbf2..615f32dac 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c @@ -24,6 +24,7 @@ #include "devices.h" #include <ramips_eth_platform.h> +#include <rt305x_esw_platform.h> static struct resource rt305x_flash0_resources[] = { { @@ -142,7 +143,12 @@ static struct resource rt305x_esw_resources[] = { }, }; -struct rt305x_esw_platform_data rt305x_esw_data; +struct rt305x_esw_platform_data rt305x_esw_data = { + .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE, + .reg_initval_fct2 = 0x00d6500c, + .reg_initval_fpa2 = 0x3f502b28, +}; + static struct platform_device rt305x_esw_device = { .name = "rt305x-esw", .resource = rt305x_esw_resources, diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c new file mode 100644 index 000000000..3ebc7fee8 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c @@ -0,0 +1,156 @@ +/* + * Sitecom WL-351 v1 002 board support + * + * Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <linux/rtl8366.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL351_GPIO_LED_POWER_AMBER 8 +#define WL351_GPIO_LED_UNPOPULATED_AMBER 12 +#define WL351_GPIO_LED_UNPOPULATED_BLUE 13 + +#define WL351_GPIO_BUTTON_RESET 10 +#define WL351_GPIO_BUTTON_WPS 0 + +#define WL351_BUTTONS_POLL_INTERVAL 20 + + +static struct gpio_led wl351_leds_gpio[] __initdata = { + { + .name = "wl-351:amber:power", + .gpio = WL351_GPIO_LED_POWER_AMBER, + .active_low = 1, + }, { + .name = "wl-351:amber:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_AMBER, + .active_low = 1, + }, { + .name = "wl-351:blue:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_BLUE, + .active_low = 1, + } +}; + + +static struct gpio_button wl351_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = WL351_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = WL351_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wl351_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x110000, + }, { + .name = "rootfs", + .offset = 0x160000, + .size = 0x230000, + }, { + .name = "user (jffs2)", + .offset = 0x3F0000, + .size = 0x010000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x3a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data wl351_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(wl351_partitions), + .parts = wl351_partitions, +#endif +}; + + +static struct rtl8366_platform_data wl351_switch_data = { + .gpio_sda = RT305X_GPIO_I2C_SD, + .gpio_sck = RT305X_GPIO_I2C_SCLK, +}; + +static struct platform_device wl351_switch = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wl351_switch_data, + } +}; + +static void __init wl351_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_MDIO); + rt305x_register_flash(0, &wl351_flash_data); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio), + wl351_leds_gpio); + ramips_register_gpio_buttons(-1, WL351_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(wl351_gpio_buttons), + wl351_gpio_buttons); + // external rtl8366rb + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS; + rt305x_esw_data.reg_initval_fct2 = 0x0002500c; + rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff; + rt305x_register_ethernet(); + platform_device_register(&wl351_switch); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002", + wl351_init); |