diff options
Diffstat (limited to 'target/linux/ramips/dts')
73 files changed, 8240 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/3G-6200N.dts b/target/linux/ramips/dts/3G-6200N.dts new file mode 100644 index 000000000..9f600276e --- /dev/null +++ b/target/linux/ramips/dts/3G-6200N.dts @@ -0,0 +1,110 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "3G-6200N", "ralink,rt3050-soc"; + model = "Edimax 3g-6200n"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@3e0000 { + label = "cimage"; + reg = <0x3e0000 0x20000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x390000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "edimax:green:power"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "edimax:amber:wlan"; + gpios = <&gpio0 14 1>; + }; + 3g { + label = "edimax:blue:3g"; + gpios = <&gpio0 7 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x211>; + }; + wlanswitch { + label = "wlanswitch"; + gpios = <&gpio0 13 1>; + linux,code = <0x100>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/3G-6200NL.dts b/target/linux/ramips/dts/3G-6200NL.dts new file mode 100644 index 000000000..0dca09874 --- /dev/null +++ b/target/linux/ramips/dts/3G-6200NL.dts @@ -0,0 +1,97 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "3G-6200N", "ralink,rt3050-soc"; + model = "Edimax 3g-6200n"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@3e0000 { + label = "cimage"; + reg = <0x3e0000 0x20000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x390000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wlan { + label = "edimax:amber:wlan"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/3G300M.dts b/target/linux/ramips/dts/3G300M.dts new file mode 100644 index 000000000..6d2411b3c --- /dev/null +++ b/target/linux/ramips/dts/3G300M.dts @@ -0,0 +1,118 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "3G300M", "ralink,rt3052-soc"; + model = "Tenda 3G300M"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3grouter { + label = "tenda:blue:3grouter"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "tenda:blue:ap"; + gpios = <&gpio0 12 1>; + }; + wisprouter { + label = "tenda:blue:wisprouter"; + gpios = <&gpio0 9 1>; + }; + wirelessrouter { + label = "tenda:blue:wirelessrouter"; + gpios = <&gpio0 13 1>; + }; + 3g { + label = "tenda:blue:3g"; + gpios = <&gpio0 7 1>; + }; + wpsreset { + label = "tenda:blue:wpsreset"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 10 1>; + linux,code = <0x100>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/AIR3GII.dts b/target/linux/ramips/dts/AIR3GII.dts new file mode 100644 index 000000000..36a8f1055 --- /dev/null +++ b/target/linux/ramips/dts/AIR3GII.dts @@ -0,0 +1,92 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "AIR3GII", "ralink,rt5350-soc"; + model = "AirLive Air3GII"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25q32b"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q32b"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wlan { + label = "airlive:green:wlan"; + gpios = <&gpio0 8 0>; + }; + mobile { + label = "airlive:green:mobile"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 7 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL0239-3G.dts b/target/linux/ramips/dts/ALL0239-3G.dts new file mode 100644 index 000000000..023ccd2fa --- /dev/null +++ b/target/linux/ramips/dts/ALL0239-3G.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "ALL0239-3G", "ralink,rt3052-soc"; + model = "Allnet ALL0239-3G"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "hw550-3g:green:usb"; + gpios = <&gpio0 8 1>; + }; + 3g { + label = "hw550-3g:green:3g"; + gpios = <&gpio0 11 1>; + }; + status { + label = "hw550-3g:green:status"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "hw550-3g:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + connect { + label = "connect"; + gpios = <&gpio0 7 1>; + linux,code = <0xda>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL0256N-4M.dts b/target/linux/ramips/dts/ALL0256N-4M.dts new file mode 100644 index 000000000..ae5723812 --- /dev/null +++ b/target/linux/ramips/dts/ALL0256N-4M.dts @@ -0,0 +1,96 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "ALL0256N", "ralink,rt3050-soc"; + model = "Allnet ALL0256N"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3c8000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + rssilow { + label = "all0256n:green:rssilow"; + gpios = <&gpio0 14 1>; + }; + rssimed { + label = "all0256n:green:rssimed"; + gpios = <&gpio0 12 1>; + }; + rssihigh { + label = "all0256n:green:rssihigh"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL0256N-8M.dts b/target/linux/ramips/dts/ALL0256N-8M.dts new file mode 100644 index 000000000..74a95bc09 --- /dev/null +++ b/target/linux/ramips/dts/ALL0256N-8M.dts @@ -0,0 +1,96 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "ALL0256N", "ralink,rt3050-soc"; + model = "Allnet ALL0256N"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + rssilow { + label = "all0256n:green:rssilow"; + gpios = <&gpio0 14 1>; + }; + rssimed { + label = "all0256n:green:rssimed"; + gpios = <&gpio0 12 1>; + }; + rssihigh { + label = "all0256n:green:rssihigh"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ALL5002.dts b/target/linux/ramips/dts/ALL5002.dts new file mode 100644 index 000000000..0ede2e321 --- /dev/null +++ b/target/linux/ramips/dts/ALL5002.dts @@ -0,0 +1,108 @@ +/dts-v1/; + +/include/ "rt3352.dtsi" + +/ { + compatible = "ALL5002", "ralink,rt3352-soc"; + model = "Allnet ALL5002"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l25635e"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + + gpios = <&gpio0 1 0 &gpio0 2 0>; + i2c-gpio,delay-us = <10>; + + pcf0: iexp@38 { + #gpio-cells = <2>; + compatible = "inxp,pcf8574a"; + reg = <0x38>; + gpio-controller; + }; + + hwmon@4b { + compatible = "national,lm92"; + reg = <0x4b>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + ld1 { + label = "allnet:green:ld1"; + gpios = <&pcf0 0 1>; + }; + ld2 { + label = "allnet:green:ld2"; + gpios = <&pcf0 1 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/ALL5003.dts b/target/linux/ramips/dts/ALL5003.dts new file mode 100644 index 000000000..581304e3a --- /dev/null +++ b/target/linux/ramips/dts/ALL5003.dts @@ -0,0 +1,108 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "ALL5003", "ralink,rt5350-soc"; + model = "Allnet ALL5003"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l25635e"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + + gpios = <&gpio0 1 0 &gpio0 2 0>; + i2c-gpio,delay-us = <10>; + + pcf0: iexp@38 { + #gpio-cells = <2>; + compatible = "inxp,pcf8574a"; + reg = <0x38>; + gpio-controller; + }; + + hwmon@4b { + compatible = "national,lm92"; + reg = <0x4b>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + ld1 { + label = "allnet:green:ld1"; + gpios = <&pcf0 0 1>; + }; + ld2 { + label = "allnet:green:ld2"; + gpios = <&pcf0 1 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/ARGUS_ATP52B.dts b/target/linux/ramips/dts/ARGUS_ATP52B.dts new file mode 100644 index 000000000..b5c94a5f3 --- /dev/null +++ b/target/linux/ramips/dts/ARGUS_ATP52B.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "ARGUS_ATP52B", "ralink,rt3052-soc"; + model = "Argus ATP-52B"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7a0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + run { + label = "argus-atp52b:green:run"; + gpios = <&gpio0 9 1>; + }; + net { + label = "argus-atp52b:amber:net"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/ASL26555-16M.dts b/target/linux/ramips/dts/ASL26555-16M.dts new file mode 100644 index 000000000..e9477b47d --- /dev/null +++ b/target/linux/ramips/dts/ASL26555-16M.dts @@ -0,0 +1,138 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "ASL26555", "ralink,rt3050-soc"; + model = "Alpha ASL26555"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25sl12801"; + reg = <0 0>; + linux,modalias = "m25p80", "s25sl12801"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + partition@fd0000 { + label = "cert"; + reg = <0xfd0000 0x10000>; + read-only; + }; + partition@fe0000 { + label = "langpack"; + reg = <0xfe0000 0x10000>; + read-only; + }; + partition@ff0000 { + label = "devdata"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x1e>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 0>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 12 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + eth { + label = "asl26555:green:eth"; + gpios = <&gpio0 0 1>; + }; + wan-red { + label = "asl26555:red:wan"; + gpios = <&gpio0 1 0>; + }; + wan-green { + label = "asl26555:green:wan"; + gpios = <&gpio0 2 0>; + }; + wlan { + label = "asl26555:green:wlan"; + gpios = <&gpio0 7 0>; + }; + power-green { + label = "asl26555:green:power"; + gpios = <&gpio0 8 0>; + }; + power-red { + label = "asl26555:red:power"; + gpios = <&gpio0 9 0>; + }; + 3g-green { + label = "asl26555:green:3g"; + gpios = <&gpio0 14 1>; + }; + 3g-red { + label = "asl26555:red:3g"; + gpios = <&gpio0 17 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/ASL26555-8M.dts b/target/linux/ramips/dts/ASL26555-8M.dts new file mode 100644 index 000000000..0a403c195 --- /dev/null +++ b/target/linux/ramips/dts/ASL26555-8M.dts @@ -0,0 +1,133 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "ASL26555", "ralink,rt3050-soc"; + model = "Alpha ASL26555"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25sl064p"; + reg = <0 0>; + linux,modalias = "m25p80", "s25sl064p"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "rgdb"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "firmware"; + reg = <0x50000 0x790000>; + }; + partition@7e0000 { + label = "cert"; + reg = <0x7e0000 0x10000>; + read-only; + }; + partition@7f0000 { + label = "langpack"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x1e>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 0>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 12 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + eth { + label = "asl26555:green:eth"; + gpios = <&gpio0 0 1>; + }; + wan-red { + label = "asl26555:red:wan"; + gpios = <&gpio0 1 0>; + }; + wan-green { + label = "asl26555:green:wan"; + gpios = <&gpio0 2 0>; + }; + wlan { + label = "asl26555:green:wlan"; + gpios = <&gpio0 7 0>; + }; + power-green { + label = "asl26555:green:power"; + gpios = <&gpio0 8 0>; + }; + power-red { + label = "asl26555:red:power"; + gpios = <&gpio0 9 0>; + }; + 3g-green { + label = "asl26555:green:3g"; + gpios = <&gpio0 14 1>; + }; + 3g-red { + label = "asl26555:red:3g"; + gpios = <&gpio0 17 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/BC2.dts b/target/linux/ramips/dts/BC2.dts new file mode 100644 index 000000000..8b97169ac --- /dev/null +++ b/target/linux/ramips/dts/BC2.dts @@ -0,0 +1,92 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "BC2", "ralink,rt3052-soc"; + model = "NexAira BC2"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "bc2:blue:usb"; + gpios = <&gpio0 20 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 17 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/BR-6425.dts b/target/linux/ramips/dts/BR-6425.dts new file mode 100644 index 000000000..7529b6b6e --- /dev/null +++ b/target/linux/ramips/dts/BR-6425.dts @@ -0,0 +1,73 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "BR-6425", "ralink,rt3052-soc"; + model = "Edimax BR-6425"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "edimax:green:power"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "edimax:orange:wlan"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + rfkill { + label = "RFKILL switch"; + gpios = <&gpio0 13 1>; + linux,code = <0xf7>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/BROADWAY.dts b/target/linux/ramips/dts/BROADWAY.dts new file mode 100644 index 000000000..a24d829a7 --- /dev/null +++ b/target/linux/ramips/dts/BROADWAY.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "BROADWAY", "ralink,rt3052-soc"; + model = "Hauppauge Broadway"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x790000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + diskmounted { + label = "red:diskmounted"; + gpios = <&gpio0 9 1>; + }; + wps_active { + label = "red:wps_active"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + factory { + label = "Factory Reset button"; + gpios = <&gpio0 13 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/CARAMBOLA.dts b/target/linux/ramips/dts/CARAMBOLA.dts new file mode 100644 index 000000000..68048edcf --- /dev/null +++ b/target/linux/ramips/dts/CARAMBOLA.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "CARAMBOLA", "ralink,rt3050-soc"; + model = "8devices Carambola"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite", "sdram", "rgmii"; + ralink,gpiomux = "i2c", "spi", "jtag", "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + + gpios = <&gpio0 1 0 &gpio0 2 0>; + i2c-gpio,delay-us = <10>; + }; +}; diff --git a/target/linux/ramips/dts/D105.dts b/target/linux/ramips/dts/D105.dts new file mode 100644 index 000000000..9b1df68a1 --- /dev/null +++ b/target/linux/ramips/dts/D105.dts @@ -0,0 +1,96 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "D105", "ralink,rt3050-soc"; + model = "Huawei D105"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "d105:red:power"; + gpios = <&gpio0 0 1>; + }; + wps { + label = "d105:green:usb"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DAP-1350.dts b/target/linux/ramips/dts/DAP-1350.dts new file mode 100644 index 000000000..4eab53abe --- /dev/null +++ b/target/linux/ramips/dts/DAP-1350.dts @@ -0,0 +1,124 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "DAP-1350", "ralink,rt3052-soc"; + model = "D-Link DAP-1350"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x30000>; + read-only; + }; + + partition@70000 { + label = "devlang"; + reg = <0x70000 0x40000>; + read-only; + }; + + partition@b0000 { + label = "firmware"; + reg = <0xb0000 0x750000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "d-link:blue:power"; + gpios = <&gpio0 8 1>; + }; + power2 { + label = "d-link:red:power"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + rt { + label = "rt"; + gpios = <&gpio0 11 1>; + linux,code = <0x100>; + }; + ap { + label = "ap"; + gpios = <&gpio0 7 1>; + linux,code = <0x101>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DIR-300-B1.dts b/target/linux/ramips/dts/DIR-300-B1.dts new file mode 100644 index 000000000..0297b8cf9 --- /dev/null +++ b/target/linux/ramips/dts/DIR-300-B1.dts @@ -0,0 +1,108 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "DIR-300-B1", "ralink,rt3050-soc"; + model = "D-Link DIR-300 B1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-600-B1.dts b/target/linux/ramips/dts/DIR-600-B1.dts new file mode 100644 index 000000000..5d78538b0 --- /dev/null +++ b/target/linux/ramips/dts/DIR-600-B1.dts @@ -0,0 +1,107 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "DIR-600-B1", "ralink,rt3050-soc"; + model = "D-Link DIR-600 B1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-600-B2.dts b/target/linux/ramips/dts/DIR-600-B2.dts new file mode 100644 index 000000000..ff15ac843 --- /dev/null +++ b/target/linux/ramips/dts/DIR-600-B2.dts @@ -0,0 +1,107 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "DIR-600-B2", "ralink,rt3050-soc"; + model = "D-Link DIR-600 B2"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-615-D.dts b/target/linux/ramips/dts/DIR-615-D.dts new file mode 100644 index 000000000..21de0e8cc --- /dev/null +++ b/target/linux/ramips/dts/DIR-615-D.dts @@ -0,0 +1,108 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "DIR-615-D", "ralink,rt3050-soc"; + model = "D-Link DIR-615 D"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/DIR-615-H1.dts b/target/linux/ramips/dts/DIR-615-H1.dts new file mode 100644 index 000000000..be852cd06 --- /dev/null +++ b/target/linux/ramips/dts/DIR-615-H1.dts @@ -0,0 +1,109 @@ +/dts-v1/; + +/include/ "rt3352.dtsi" + +/ { + compatible = "DIR-615-H1", "ralink,rt3352-soc"; + model = "D-Link DIR-615 H1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 7 0>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 0>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 12 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 13 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DIR-620-A1.dts b/target/linux/ramips/dts/DIR-620-A1.dts new file mode 100644 index 000000000..87292246e --- /dev/null +++ b/target/linux/ramips/dts/DIR-620-A1.dts @@ -0,0 +1,116 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "DIR-620-A1", "ralink,rt3050-soc"; + model = "D-Link DIR-620 A1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:amber:status"; + gpios = <&gpio0 8 1>; + }; + status2 { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wan { + label = "d-link:amber:wan"; + gpios = <&gpio0 14 1>; + }; + wan2 { + label = "d-link:green:wan"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "d-link:blue:wps"; + gpios = <&gpio0 13 0>; + }; + wps2 { + label = "d-link:amber:wps"; + gpios = <&gpio0 11 0>; + }; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DIR-620-D1.dts b/target/linux/ramips/dts/DIR-620-D1.dts new file mode 100644 index 000000000..d2650330c --- /dev/null +++ b/target/linux/ramips/dts/DIR-620-D1.dts @@ -0,0 +1,101 @@ +/dts-v1/; + +/include/ "rt3352.dtsi" + +/ { + compatible = "DIR-620-D1", "ralink,rt3352-soc"; + model = "D-Link DIR-620 D1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "d-link:green:status"; + gpios = <&gpio0 9 1>; + }; + wifi { + label = "d-link:green:wifi"; + gpios = <&gpio0 17 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 7 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/DIR-645.dts b/target/linux/ramips/dts/DIR-645.dts new file mode 100644 index 000000000..e0b375200 --- /dev/null +++ b/target/linux/ramips/dts/DIR-645.dts @@ -0,0 +1,138 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "DIR-645", "ralink,rt3883-soc"; + model = "D-Link DIR-645"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite", "spi"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <25000000>; + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x4000>; + read-only; + }; + factory: partition@34000 { + label = "factory"; + reg = <0x34000 0x4000>; + read-only; + }; + partition@38000 { + label = "nvram"; + reg = <0x38000 0x8000>; + read-only; + }; + partition@40000 { + label = "devdata"; + reg = <0x40000 0x10000>; + }; + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + + mtd-mac-address = <&factory 0x28>; + ralink,fixed-link = <1000 1 1 1>; + }; + + wmac@10180000 { + status = "okay"; + ralink,5ghz = <0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + rtl8367b { + compatible = "realtek,rtl8367b"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + realtek,extif1 = <1 0 1 1 1 1 1 1 2>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 9 0>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 14 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + inet { + label = "d-link:green:inet"; + gpios = <&gpio0 0 1>; + }; + wps { + label = "d-link:green:wps"; + gpios = <&gpio1 2 0>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio1 6 0>; + }; + }; +}; diff --git a/target/linux/ramips/dts/ESR-9753.dts b/target/linux/ramips/dts/ESR-9753.dts new file mode 100644 index 000000000..5c5f0bbbe --- /dev/null +++ b/target/linux/ramips/dts/ESR-9753.dts @@ -0,0 +1,96 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "ESR-9753", "ralink,rt3052-soc"; + model = "Senao / EnGenius ESR-9753"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "esr-9753:orange:power"; + gpios = <&gpio0 8 1>; + }; + wps { + label = "esr-9753:orange:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/F5D8235_V1.dts b/target/linux/ramips/dts/F5D8235_V1.dts new file mode 100644 index 000000000..41a7f122c --- /dev/null +++ b/target/linux/ramips/dts/F5D8235_V1.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "F5D8235_V1", "ralink,rt2880-soc"; + model = "Belkin F5D8235 v1"; + + palmbus@300000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@400000 { + status = "okay"; + + ralink,fixed-link = <1000 1 1 1>; + }; + + wmac@480000 { + status = "okay"; + }; + + rtl8367s { + compatible = "realtek,rtl8367s"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + storage { + label = "f5d8235-v1:blue:storage"; + gpios = <&gpio0 7 1>; + }; + storage2 { + label = "f5d8235-v1:orange:storage"; + gpios = <&gpio0 8 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/F5D8235_V2.dts b/target/linux/ramips/dts/F5D8235_V2.dts new file mode 100644 index 000000000..10b803781 --- /dev/null +++ b/target/linux/ramips/dts/F5D8235_V2.dts @@ -0,0 +1,116 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "F5D8235_V2", "ralink,rt3052-soc"; + model = "Belkin F5D8235 v2"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "i2c", "spi", "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x50000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x790000>; + }; + + partition@7e0000 { + label = "nvram"; + reg = <0x7e0000 0x10000>; + }; + + factory: partition@7f0000 { + label = "factory"; + reg = <0x7f0000 0x10000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + rtl8366rb { + compatible = "rtl8367rb"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + internet { + label = "f5d8235v2:blue:internet"; + gpios = <&gpio0 5 1>; + }; + internet2 { + label = "f5d8235v2:amber:internet"; + gpios = <&gpio0 6 1>; + }; + modem { + label = "f5d8235v2:blue:modem"; + gpios = <&gpio0 11 1>; + }; + modem2 { + label = "f5d8235v2:amber:modem"; + gpios = <&gpio0 8 1>; + }; + router { + label = "f5d8235v2:blue:router"; + gpios = <&gpio0 9 1>; + }; + storage { + label = "f5d8235v2:blue:storage"; + gpios = <&gpio0 23 1>; + }; + storage2 { + label = "f5d8235v2:amber:storage"; + gpios = <&gpio0 22 1>; + }; + security { + label = "f5d8235v2:blue:security"; + gpios = <&gpio0 13 1>; + }; + security2 { + label = "f5d8235v2:amber:security"; + gpios = <&gpio0 12 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/FONERA20N.dts b/target/linux/ramips/dts/FONERA20N.dts new file mode 100644 index 000000000..38007a7bc --- /dev/null +++ b/target/linux/ramips/dts/FONERA20N.dts @@ -0,0 +1,130 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "FONERA20N", "ralink,rt3052-soc"; + model = "La Fonera 2.0N"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "fonera20n:orange:wifi"; + gpios = <&gpio0 7 1>; + }; + power { + label = "fonera20n:green:power"; + gpios = <&gpio0 9 1>; + }; + usb { + label = "fonera20n:orange:usb"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + switch { + label = "switch"; + gpios = <&gpio0 13 1>; + linux,code = <0x101>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + + port@0 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <0 4>; + }; + port@1 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <1 3>; + }; + port@2 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <2 2>; + }; + port@3 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <3 1>; + }; + port@4 { + compatible = "swconfig,port"; + swconfig,segment = "wan"; + swconfig,portmap = <4 0>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts new file mode 100644 index 000000000..a3cc8fc97 --- /dev/null +++ b/target/linux/ramips/dts/FREESTATION5.dts @@ -0,0 +1,103 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "FREESTATION5", "ralink,rt3050-soc"; + model = "ARC FreeStation5"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x01>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + gpio-export { + compatible = "gpio-export"; + // Used to enable power-over-ethernet passthrough from port0 to port1. + // Disable passthrough by default to prevent accidental equipment damage. + poe { + gpio-export,name = "poe-passthrough"; + gpio-export,output = <1>; // OUT_INIT_HIGH + gpios = <&gpio0 11 1>; // GPIO 11, ACTIVE_LOW + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + // The following leds are defined in the ArcOS firmware, but reportedly + // not present in the Freestation5 device. + wifi { + label = "freestation:unknown:wifi"; + gpios = <&gpio0 7 1>; + }; + powerg { + label = "freestation:unknown:powerg"; + gpios = <&gpio0 9 1>; + }; + usb { + label = "freestation:unknown:usb"; + gpios = <&gpio0 14 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/HW550-3G.dts b/target/linux/ramips/dts/HW550-3G.dts new file mode 100644 index 000000000..80adb0af3 --- /dev/null +++ b/target/linux/ramips/dts/HW550-3G.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "HW550-3G", "ralink,rt3052-soc"; + model = "Aztech HW550-3G"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "hw550-3g:green:usb"; + gpios = <&gpio0 8 1>; + }; + 3g { + label = "hw550-3g:green:3g"; + gpios = <&gpio0 11 1>; + }; + status { + label = "hw550-3g:green:status"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "hw550-3g:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + connect { + label = "connect"; + gpios = <&gpio0 7 1>; + linux,code = <0xda>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/MOFI3500-3GN.dts b/target/linux/ramips/dts/MOFI3500-3GN.dts new file mode 100644 index 000000000..80cd72746 --- /dev/null +++ b/target/linux/ramips/dts/MOFI3500-3GN.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "MOFI3500-3GN", "ralink,rt3052-soc"; + model = "MoFi Network MOFI3500-3GN"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "mofi3500-3gn:green:usb"; + gpios = <&gpio0 8 1>; + }; + 3g { + label = "mofi3500-3gn:green:3g"; + gpios = <&gpio0 11 1>; + }; + status { + label = "mofi3500-3gn:green:status"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "mofi3500-3gn:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + connect { + label = "connect"; + gpios = <&gpio0 7 1>; + linux,code = <0xda>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/MZK-W300NH2.dts b/target/linux/ramips/dts/MZK-W300NH2.dts new file mode 100644 index 000000000..29032b450 --- /dev/null +++ b/target/linux/ramips/dts/MZK-W300NH2.dts @@ -0,0 +1,111 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "MZK-W300NH2", "ralink,rt3052-soc"; + model = "Planex MZK-W300NH2"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "i2c", "spi", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@3e0000 { + label = "cimage"; + reg = <0x3e0000 0x20000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x390000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "mzkw300nh2:green:power"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "mzkw300nh2:amber:wlan"; + gpios = <&gpio0 14 1>; + }; + wps { + label = "mzkw300nh2:amber:wps"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + rt { + label = "rt"; + gpios = <&gpio0 13 1>; + linux,code = <0x100>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/NBG-419N.dts b/target/linux/ramips/dts/NBG-419N.dts new file mode 100644 index 000000000..694812005 --- /dev/null +++ b/target/linux/ramips/dts/NBG-419N.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "NBG-419N", "ralink,rt3052-soc"; + model = "ZyXEL NBG-419N"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "nbg-419n:green:power"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "nbg-419n:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/NW718.dts b/target/linux/ramips/dts/NW718.dts new file mode 100644 index 000000000..78ad1d63a --- /dev/null +++ b/target/linux/ramips/dts/NW718.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "NW718", "ralink,rt3050-soc"; + model = "Netcore NW718"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,gpiomux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <25000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x20000>; + read-only; + }; + + factory: partition@50000 { + label = "factory"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0x3a0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + cpu { + label = "nw718:amber:cpu"; + gpios = <&gpio0 13 1>; + }; + usb { + label = "nw718:amber:usb"; + gpios = <&gpio0 8 1>; + }; + wps { + label = "nw718:amber:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts new file mode 100644 index 000000000..814829489 --- /dev/null +++ b/target/linux/ramips/dts/OMNI-EMB-HPM.dts @@ -0,0 +1,149 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc"; + model = "Omnima EMB HPM"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite", "spi"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + compatible = "macronix,mx25l12805d"; + spi-max-frequency = <25000000>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "config"; + read-only; + }; + + partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x00fb0000>; + label = "firmware"; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + + phy-handle = <&phy0>; + phy-mode = "rgmii"; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@4 { + reg = <4>; + }; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 14 0>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "emb:orange:power"; + gpios = <&gpio0 7 1>; + }; + status { + label = "emb:green:status"; + gpios = <&gpio0 21 1>; + }; + eth { + label = "emb:green:eth"; + gpios = <&gpio0 20 1>; + }; + eth2 { + label = "emb:red:eth"; + gpios = <&gpio0 18 1>; + }; + wifi { + label = "emb:green:wifi"; + gpios = <&gpio0 17 1>; + }; + wifi2 { + label = "emb:red:wifi"; + gpios = <&gpio0 19 1>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + /* gpio 12 and 13 handle the OC input */ + usb0 { + gpio-export,name = "usb0"; + gpio-export,output = <1>; + gpios = <&gpio0 2 0>; + }; + usb1 { + gpio-export,name = "usb1"; + gpio-export,output = <1>; + gpios = <&gpio0 1 0>; + }; + }; +}; diff --git a/target/linux/ramips/dts/OMNI-EMB.dts b/target/linux/ramips/dts/OMNI-EMB.dts new file mode 100644 index 000000000..704a5a166 --- /dev/null +++ b/target/linux/ramips/dts/OMNI-EMB.dts @@ -0,0 +1,94 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "OMNI-EMB", "ralink,rt3052-soc"; + model = "Omnima MiniEMBWiFi"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "emb:green:status"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "emb:green:wlan"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/PSR-680W.dts b/target/linux/ramips/dts/PSR-680W.dts new file mode 100644 index 000000000..f91eb2fe7 --- /dev/null +++ b/target/linux/ramips/dts/PSR-680W.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "PSR-680W", "ralink,rt3052-soc"; + model = "Petatel PSR-680W Wireless 3G Router"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "uartlite", "sdram"; + ralink,gpiomux = "spi", "jtag", "mdio", "rgmii"; + ralink,uartmux = "i2s uartf"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wan { + label = "psr-680w:red:wan"; + gpios = <&gpio0 19 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/PWH2004.dts b/target/linux/ramips/dts/PWH2004.dts new file mode 100644 index 000000000..d526e836d --- /dev/null +++ b/target/linux/ramips/dts/PWH2004.dts @@ -0,0 +1,91 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "PWH2004", "ralink,rt3052-soc"; + model = "Prolink PWH2004"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "pwh2004:red:wifi"; + gpios = <&gpio0 14 1>; + }; + power { + label = "pwh2004:green:power"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RT-G32-B1.dts b/target/linux/ramips/dts/RT-G32-B1.dts new file mode 100644 index 000000000..9a5cab45b --- /dev/null +++ b/target/linux/ramips/dts/RT-G32-B1.dts @@ -0,0 +1,85 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "RT-G32-B1", "ralink,rt3050-soc"; + model = "Asus RT-G32 B1"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RT-N10-PLUS.dts b/target/linux/ramips/dts/RT-N10-PLUS.dts new file mode 100644 index 000000000..2f070b741 --- /dev/null +++ b/target/linux/ramips/dts/RT-N10-PLUS.dts @@ -0,0 +1,91 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "RT-N10-PLUS", "ralink,rt3050-soc"; + model = "Asus RT-N10+"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "asus:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RT-N13U.dts b/target/linux/ramips/dts/RT-N13U.dts new file mode 100644 index 000000000..162a5c85d --- /dev/null +++ b/target/linux/ramips/dts/RT-N13U.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "RT-N13U", "ralink,rt3052-soc"; + model = "Asus RT-N13U"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "rt-n13u:power"; + gpios = <&gpio0 7 1>; + }; + wifi { + label = "rt-n13u:wifi"; + gpios = <&gpio0 8 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <10>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/RT-N15.dts b/target/linux/ramips/dts/RT-N15.dts new file mode 100644 index 000000000..2ff266cfd --- /dev/null +++ b/target/linux/ramips/dts/RT-N15.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "RT-N15", "ralink,rt2880-soc"; + model = "Asus RT-N15"; + + palmbus@300000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@400000 { + status = "okay"; + + ralink,fixed-link = <1000 1 1 1>; + }; + + wmac@480000 { + status = "okay"; + }; + + rtl8366s { + compatible = "realtek,rtl8366s"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 0>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 12 0>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "rt-n15:blue:power"; + gpios = <&gpio0 11 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/RTN56U.dts b/target/linux/ramips/dts/RTN56U.dts new file mode 100644 index 000000000..0c09904f5 --- /dev/null +++ b/target/linux/ramips/dts/RTN56U.dts @@ -0,0 +1,136 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "RT-N56U", "ralink,rt3883-soc"; + model = "Asus RT-N56U"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,pcimux = "pci-fnc"; + ralink,wdtmux = <0>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + }; + + ethernet@10100000 { + status = "okay"; + + ralink,fixed-link = <1000 1 1 1>; + }; + + pci@10140000 { + status = "okay"; + + host-bridge { + pci-bridge@1 { + status = "okay"; + }; + }; + }; + + wmac@10180000 { + status = "okay"; + ralink,2ghz = <0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + nor-flash@1c000000 { + compatible = "cfi-flash"; + reg = <0x1c000000 0x800000>; + + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "u-boot-env"; + read-only; + }; + + partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x007b0000>; + label = "firmware"; + }; + }; + + rtl8367 { + compatible = "realtek,rtl8367"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + realtek,extif1 = <1 0 1 1 1 1 1 1 2>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 13 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio1 2 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "asus:blue:power"; + gpios = <&gpio0 0 1>; + }; + lan { + label = "asus:blue:lan"; + gpios = <&gpio0 19 1>; + }; + wan { + label = "asus:blue:wan"; + gpios = <&gpio1 3 1>; + }; + usb { + label = "asus:blue:usb"; + gpios = <&gpio1 0 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/SL-R7205.dts b/target/linux/ramips/dts/SL-R7205.dts new file mode 100644 index 000000000..8f1fe851f --- /dev/null +++ b/target/linux/ramips/dts/SL-R7205.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "SL-R7205", "ralink,rt3052-soc"; + model = "Skyline SL-R7205 Wireless 3G Router"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "sl-r7205:green:wifi"; + gpios = <&gpio0 7 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts new file mode 100644 index 000000000..eb2d4bc6a --- /dev/null +++ b/target/linux/ramips/dts/TEW-691GR.dts @@ -0,0 +1,111 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "TEW-691GR", "ralink,rt3883-soc"; + model = "TRENDnet TEW-691GR"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,pcimux = "pci-fnc"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + }; + + ethernet@10100000 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii"; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + wmac@10180000 { + status = "okay"; + ralink,5ghz = <0>; + }; + + nor-flash@1c000000 { + compatible = "cfi-flash"; + reg = <0x1c000000 0x800000>; + + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "u-boot-env"; + read-only; + }; + + partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x007b0000>; + label = "firmware"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio1 2 1>; + linux,code = <0x211>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio0 0 1>; + linux,code = <0xf7>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "trendnet:green:wps"; + gpios = <&gpio0 9 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts new file mode 100644 index 000000000..f5d0d0484 --- /dev/null +++ b/target/linux/ramips/dts/TEW-692GR.dts @@ -0,0 +1,112 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "TEW-692GR", "ralink,rt3883-soc"; + model = "TRENDnet TEW-692GR"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c", "jtag", "spi"; + ralink,uartmux = "gpio"; + ralink,pcimux = "pci-fnc"; + ralink,wdtmux = <1>; + }; + + timer@100 { + status = "okay"; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + }; + + ethernet@10100000 { + status = "okay"; + ralink,phy-mask = <0x1>; + phy-mode = "rgmii"; + }; + + pci@10140000 { + status = "okay"; + + host-bridge { + pci-bridge@1 { + status = "okay"; + }; + }; + }; + + wmac@10180000 { + status = "okay"; + ralink,5ghz = <0>; + }; + + nor-flash@1c000000 { + compatible = "cfi-flash"; + reg = <0x1c000000 0x800000>; + + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "u-boot-env"; + read-only; + }; + + partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x007b0000>; + label = "firmware"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio1 2 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "trendnet:orange:wps"; + gpios = <&gpio0 9 1>; + }; + wps2 { + label = "trendnet:green:wps"; + gpios = <&gpio1 4 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/UR-326N4G.dts b/target/linux/ramips/dts/UR-326N4G.dts new file mode 100644 index 000000000..6bb360d9d --- /dev/null +++ b/target/linux/ramips/dts/UR-326N4G.dts @@ -0,0 +1,112 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "UR-326N4G", "ralink,rt3052-soc"; + model = "UR-326N4G Wireless N router"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "ur326:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "ur326:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "ur326:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "ur326:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "ur326:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/UR-336UN.dts b/target/linux/ramips/dts/UR-336UN.dts new file mode 100644 index 000000000..a5c284121 --- /dev/null +++ b/target/linux/ramips/dts/UR-336UN.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "UR-336UN", "ralink,rt3052-soc"; + model = "UR-336UN Wireless N router"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "ur336:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "ur336:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "ur336:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "ur336:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "ur336:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/V11STFE.dts b/target/linux/ramips/dts/V11STFE.dts new file mode 100644 index 000000000..20cbaea49 --- /dev/null +++ b/target/linux/ramips/dts/V11STFE.dts @@ -0,0 +1,93 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + compatible = "V11ST-FE", "ralink,rt2880-soc"; + model = "Ralink V11ST-FE"; + + palmbus@300000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,pcimux = "pci-fnc"; + ralink,wdtmux = <0>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + ethernet@400000 { + status = "okay"; + }; + + wmac@480000 { + status = "okay"; + }; + + pci@10140000 { + status = "okay"; + + host-bridge { + pci-bridge@1 { + status = "okay"; + }; + }; + }; + + nor-flash@1c000000 { + compatible = "cfi-flash"; + reg = <0x1c000000 0x800000>; + + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "u-boot-env"; + read-only; + }; + + partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x003b0000>; + label = "firmware"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 0>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "v11st-fe:green:status"; + gpios = <&gpio0 12 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/V22RW-2X2.dts b/target/linux/ramips/dts/V22RW-2X2.dts new file mode 100644 index 000000000..a4f8c3c77 --- /dev/null +++ b/target/linux/ramips/dts/V22RW-2X2.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "V22RW-2X2", "ralink,rt3052-soc"; + model = "Ralink AP-RT3052-V22RW-2X2"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + security { + label = "v22rw-2x2:green:security"; + gpios = <&gpio0 13 1>; + }; + wps { + label = "v22rw-2x2:red:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/W150M.dts b/target/linux/ramips/dts/W150M.dts new file mode 100644 index 000000000..94f196064 --- /dev/null +++ b/target/linux/ramips/dts/W150M.dts @@ -0,0 +1,111 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "3G300M", "ralink,rt3050-soc"; + model = "Tenda 3G300M"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3c8000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3grouter { + label = "tenda:blue:3grouter"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "tenda:blue:ap"; + gpios = <&gpio0 12 1>; + }; + wisprouter { + label = "tenda:blue:wisprouter"; + gpios = <&gpio0 9 1>; + }; + wirelessrouter { + label = "tenda:blue:wirelessrouter"; + gpios = <&gpio0 13 1>; + }; + 3g { + label = "tenda:blue:3g"; + gpios = <&gpio0 7 1>; + }; + wpsreset { + label = "tenda:blue:wpsreset"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 10 1>; + linux,code = <0x100>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/W306R_V20.dts b/target/linux/ramips/dts/W306R_V20.dts new file mode 100644 index 000000000..f5b341444 --- /dev/null +++ b/target/linux/ramips/dts/W306R_V20.dts @@ -0,0 +1,90 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "W306R_V20", "ralink,rt3052-soc"; + model = "Tenda W306R V2.0"; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + sys { + label = "w306r-v20:green:sys"; + gpios = <&gpio0 9 1>; + }; + wps { + label = "w306r-v20:green:wps"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "RESET/WPS"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/W502U.dts b/target/linux/ramips/dts/W502U.dts new file mode 100644 index 000000000..89ddc7940 --- /dev/null +++ b/target/linux/ramips/dts/W502U.dts @@ -0,0 +1,103 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "W502U", "ralink,rt3052-soc"; + model = "ALFA Networks W502U"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "alfa:blue:usb"; + gpios = <&gpio0 13 1>; + }; + wps { + label = "alfa:blue:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WCR150GN.dts b/target/linux/ramips/dts/WCR150GN.dts new file mode 100644 index 000000000..380af7d55 --- /dev/null +++ b/target/linux/ramips/dts/WCR150GN.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WCR150GN", "ralink,rt3052-soc"; + model = "Sparklan WCR-150GN"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + user { + label = "wcr150gn:amber:user"; + gpios = <&gpio0 12 1>; + }; + power { + label = "wcr150gn:amber:power"; + gpios = <&gpio0 8 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts new file mode 100644 index 000000000..bd18f4cdf --- /dev/null +++ b/target/linux/ramips/dts/WHR-G300N.dts @@ -0,0 +1,86 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WHR-G300N", "ralink,rt3052-soc"; + model = "Buffalo WHR-G300N"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + diag { + label = "whr-g300n:red:diag"; + gpios = <&gpio0 7 1>; + }; + router { + label = "whr-g300n:green:router"; + gpios = <&gpio0 9 1>; + }; + security { + label = "whr-g300n:amber:security"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + aoss { + label = "aoss"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + router-off { + label = "router-off"; + gpios = <&gpio0 11 1>; + linux,code = <0x102>; + }; + router-on { + label = "router-on"; + gpios = <&gpio0 8 1>; + linux,code = <0x103>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts new file mode 100644 index 000000000..f9e0595f1 --- /dev/null +++ b/target/linux/ramips/dts/WL-351.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WL-351", "ralink,rt3052-soc"; + model = "Sitecom WL-351 v1 002"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "i2c", "spi", "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3f>; + ralink,fct2 = <0x0002500c>; + /* + * ext phy base addr 31, rx/tx clock skew 0, + * turbo mii off, rgmi 3.3v off, port 5 polling off + * port5: enabled, gige, full-duplex, rx/tx-flow-control + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ + ralink,fpa2 = <0x1f003fff>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "wl-351:amber:power"; + gpios = <&gpio0 8 1>; + }; + unpopulated { + label = "wl-351:amber:unpopulated"; + gpios = <&gpio0 12 1>; + }; + unpopulated2 { + label = "wl-351:blue:unpopulated"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + rtl8366rb { + compatible = "rtl8367rb"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; +}; diff --git a/target/linux/ramips/dts/WL341V3.dts b/target/linux/ramips/dts/WL341V3.dts new file mode 100644 index 000000000..09ef84495 --- /dev/null +++ b/target/linux/ramips/dts/WL341V3.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WL341V3", "ralink,rt3052-soc"; + model = "Sitecom WL-341 v3"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "board-nvram"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + first { + label = "wl341v3:amber:first"; + gpios = <&gpio0 9 1>; + }; + first2 { + label = "wl341v3:blue:first"; + gpios = <&gpio0 13 1>; + }; + third { + label = "wl341v3:amber:third"; + gpios = <&gpio0 11 1>; + }; + third2 { + label = "wl341v3:blue:third"; + gpios = <&gpio0 14 1>; + }; + fourth { + label = "wl341v3:blue:fourth"; + gpios = <&gpio0 10 1>; + }; + fifth { + label = "wl341v3:amber:fifth"; + gpios = <&gpio0 12 1>; + }; + fifth2 { + label = "wl341v3:blue:fifth"; + gpios = <&gpio0 8 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 7 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 5 1>; + linux,code = <0x211>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WLI-TX4-AG300N.dts b/target/linux/ramips/dts/WLI-TX4-AG300N.dts new file mode 100644 index 000000000..ff33a8a4d --- /dev/null +++ b/target/linux/ramips/dts/WLI-TX4-AG300N.dts @@ -0,0 +1,101 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc"; + model = "Buffalo WLI-TX4-AG300N"; + + palmbus@300000 { + sysc@0 { + ralink,pinmux = "uartlite"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@400000 { + status = "okay"; + + ralink,fixed-link = <100 1 1 1>; + }; + + wmac@480000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + bandwidth { + label = "bandwidth"; + gpios = <&gpio0 8 0>; + linux,code = <0x198>; + }; + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + diag { + label = "buffalo:red:diag"; + gpios = <&gpio0 10 1>; + }; + power { + label = "buffalo:blue:power"; + gpios = <&gpio0 12 1>; + }; + security { + label = "buffalo:blue:security"; + gpios = <&gpio0 13 1>; + }; + }; +}; diff --git a/target/linux/ramips/dts/WL_330N.dts b/target/linux/ramips/dts/WL_330N.dts new file mode 100644 index 000000000..4ffced1ba --- /dev/null +++ b/target/linux/ramips/dts/WL_330N.dts @@ -0,0 +1,97 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WL_330N", "ralink,rt3050-soc"; + model = "Asus WL-330N"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + link { + label = "asus:blue:link"; + gpios = <&gpio0 9 1>; + }; + power { + label = "asus:blue:power"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WL_330N3G.dts b/target/linux/ramips/dts/WL_330N3G.dts new file mode 100644 index 000000000..04a46237b --- /dev/null +++ b/target/linux/ramips/dts/WL_330N3G.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WL_330N3G", "ralink,rt3050-soc"; + model = "Asus WL-330N3G"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "asus:blue:3g"; + gpios = <&gpio0 9 1>; + }; + 3g2 { + label = "asus:red:3g"; + gpios = <&gpio0 13 1>; + }; + power { + label = "asus:blue:power"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WNCE2001.dts b/target/linux/ramips/dts/WNCE2001.dts new file mode 100644 index 000000000..d7ad3aae9 --- /dev/null +++ b/target/linux/ramips/dts/WNCE2001.dts @@ -0,0 +1,138 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WNCE2001", "ralink,rt3052-soc"; + model = "Netgear WNCE2001"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "spi", "uartlite", "jtag", "sdram"; + ralink,gpiomux = "i2c", "mdio", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "config"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "language"; + reg = <0x60000 0x30000>; + read-only; + }; + + partition@90000 { + label = "pot"; + reg = <0x90000 0x10000>; + read-only; + }; + + partition@a0000 { + label = "checksum"; + reg = <0xa0000 0x10000>; + }; + + partition@b0000 { + label = "firmware"; + reg = <0xb0000 0x350000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + }; + + wmac@10180000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + power-green { + label = "netgear:green:power"; + gpios = <&gpio0 8 1>; + }; + power-red { + label = "netgear:red:power"; + gpios = <&gpio0 9 1>; + }; + wlan-green { + label = "netgear:green:wlan"; + gpios = <&gpio0 12 0>; + }; + wlan-red { + label = "netgear:red:wlan"; + gpios = <&gpio0 13 0>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + rt { + label = "rt"; + gpios = <&gpio0 11 1>; + linux,code = <0x100>; + }; + ap { + label = "ap"; + gpios = <&gpio0 7 1>; + linux,code = <0x101>; + }; + }; +}; diff --git a/target/linux/ramips/dts/WR512-3GN-4M.dts b/target/linux/ramips/dts/WR512-3GN-4M.dts new file mode 100644 index 000000000..cef7464d4 --- /dev/null +++ b/target/linux/ramips/dts/WR512-3GN-4M.dts @@ -0,0 +1,112 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WR512-3GN", "ralink,rt3052-soc"; + model = "WR512-3GN-like router"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3c8000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "wr512:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "wr512:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "wr512:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "wr512:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "wr512:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WR512-3GN-8M.dts b/target/linux/ramips/dts/WR512-3GN-8M.dts new file mode 100644 index 000000000..9325dbb87 --- /dev/null +++ b/target/linux/ramips/dts/WR512-3GN-8M.dts @@ -0,0 +1,112 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WR512-3GN", "ralink,rt3052-soc"; + model = "WR512-3GN-like router"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + 3g { + label = "wr512:green:3g"; + gpios = <&gpio0 9 1>; + }; + gateway { + label = "wr512:green:gateway"; + gpios = <&gpio0 11 1>; + }; + ap { + label = "wr512:green:ap"; + gpios = <&gpio0 12 1>; + }; + wps { + label = "wr512:green:wps"; + gpios = <&gpio0 14 1>; + }; + station { + label = "wr512:green:station"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + mode { + label = "mode"; + gpios = <&gpio0 7 1>; + linux,code = <0x32>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts new file mode 100644 index 000000000..a970849e3 --- /dev/null +++ b/target/linux/ramips/dts/WR6202.dts @@ -0,0 +1,115 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "WR6202", "ralink,rt3052-soc"; + model = "AWB WR6202"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + gpio-leds { + compatible = "gpio-leds"; + wps { + label = "wr6202:blue:wps"; + gpios = <&gpio0 14 1>; + }; + 3g { + label = "wr6202:blue:3g"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <0>; + gpios = <&gpio0 11 0>; + }; + }; +}; diff --git a/target/linux/ramips/dts/XDXRN502J.dts b/target/linux/ramips/dts/XDXRN502J.dts new file mode 100644 index 000000000..3df097cde --- /dev/null +++ b/target/linux/ramips/dts/XDXRN502J.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "XDXRN502J", "ralink,rt3052-soc"; + model = "XDX RN502J"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "xdxrn502j:green:wifi"; + gpios = <&gpio0 7 1>; + }; + power { + label = "xdxrn502j:green:power"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/mt7620.dtsi b/target/linux/ramips/dts/mt7620.dtsi new file mode 100644 index 000000000..9f913cd85 --- /dev/null +++ b/target/linux/ramips/dts/mt7620.dtsi @@ -0,0 +1,140 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,mtk7620n-soc", "ralink,mt7620-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,mt7620-sysc", "ralink,mt7620n-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,mt7620-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,mt7620-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,mt7620-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,mt7620-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <0>; + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + }; + + gpio1: gpio@638 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <24>; + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + gpio2: gpio@660 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <40>; + ralink,num-gpios = <32>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + gpio3: gpio@688 { + compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; + reg = <0x688 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <72>; + ralink,num-gpios = <1>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + spi@b00 { + compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,mt7620-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi new file mode 100644 index 000000000..637409f35 --- /dev/null +++ b/target/linux/ramips/dts/rt2880.dtsi @@ -0,0 +1,157 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt2880-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memorydetect { + ralink,memory = <0x8000000 0x200000 0x8000000>; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@300000 { + compatible = "palmbus"; + reg = <0x300000 0x200000>; + ranges = <0x0 0x300000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt2880-sysc"; + reg = <0x000 0x100>; + }; + + timer@100 { + compatible = "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + + status = "disabled"; + }; + + watchdog@120 { + compatible = "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt2880-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <0>; + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <24>; + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <40>; + ralink,num-gpios = <32>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + reg-shift = <2>; + }; + }; + + ethernet@400000 { + compatible = "ralink,rt2880-eth"; + reg = <0x00400000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + wmac@480000 { + compatible = "ralink,rt2880-wmac"; + reg = <0x480000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + +}; diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi new file mode 100644 index 000000000..45d923853 --- /dev/null +++ b/target/linux/ramips/dts/rt3050.dtsi @@ -0,0 +1,179 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt3052-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt3052-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3052-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <0>; + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <24>; + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <40>; + ralink,num-gpios = <12>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi@b00 { + compatible = "ralink,rt3050-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + + }; + + ethernet@10100000 { + compatible = "ralink,rt3050-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + }; + + esw@10110000 { + compatible = "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; + + status = "disabled"; + }; + + wmac@10180000 { + compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + otg@101c0000 { + compatible = "ralink,rt3050-otg"; + reg = <0x101c0000 40000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi new file mode 100644 index 000000000..9c7c268b8 --- /dev/null +++ b/target/linux/ramips/dts/rt3352.dtsi @@ -0,0 +1,188 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3352-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt3352-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt3352-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3352-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <0>; + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <24>; + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <40>; + ralink,num-gpios = <12>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi@b00 { + compatible = "ralink,rt3352-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; + + ethernet@10100000 { + compatible = "ralink,rt3352-eth", "ralink,rt3050-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + }; + + esw@10110000 { + compatible = "ralink,rt3352-esw", "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; + + status = "disabled"; + }; + + wmac@10180000 { + compatible = "ralink,rt3352-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + ehci@101c0000 { + compatible = "ralink,rt3352-ehci", "ehci-platform"; + reg = <0x101c0000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; + + ohci@101c1000 { + compatible = "ralink,rt3352-ohci", "ohci-platform"; + reg = <0x101c1000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi new file mode 100644 index 000000000..6f824d5e8 --- /dev/null +++ b/target/linux/ramips/dts/rt3883.dtsi @@ -0,0 +1,291 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3883-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips74Kc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + aliases { + spi0 = &spi0; + }; + + memorydetect { + ralink,memory = <0x0 0x200000 0x10000000>; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt3883-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <0>; + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <24>; + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <40>; + ralink,num-gpios = <32>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio3: gpio@688 { + compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + reg = <0x688 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <72>; + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi0: spi@b00 { + compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; + + ethernet@10100000 { + compatible = "ralink,rt3883-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + pci@10140000 { + compatible = "ralink,rt3883-pci"; + reg = <0x10140000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; /* direct mapping */ + + status = "disabled"; + + pciintc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <4>; + }; + + host-bridge { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + device_type = "pci"; + + bus-range = <0 255>; + ranges = < + 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */ + 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */ + >; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 17 */ + 0x8800 0 0 1 &pciintc 18 + 0x8800 0 0 2 &pciintc 18 + 0x8800 0 0 3 &pciintc 18 + 0x8800 0 0 4 &pciintc 18 + /* IDSEL 18 */ + 0x9000 0 0 1 &pciintc 19 + 0x9000 0 0 2 &pciintc 19 + 0x9000 0 0 3 &pciintc 19 + 0x9000 0 0 4 &pciintc 19 + >; + + pci-bridge@1 { + reg = <0x0800 0 0 0 0>; + device_type = "pci"; + #interrupt-cells = <1>; + #address-cells = <3>; + #size-cells = <2>; + + status = "disabled"; + + ralink,pci-slot = <1>; + + interrupt-map-mask = <0x0 0 0 0>; + interrupt-map = <0x0 0 0 0 &pciintc 20>; + }; + + pci-slot@17 { + reg = <0x8800 0 0 0 0>; + device_type = "pci"; + #interrupt-cells = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ralink,pci-slot = <17>; + + status = "disabled"; + }; + + pci-slot@18 { + reg = <0x9000 0 0 0 0>; + device_type = "pci"; + #interrupt-cells = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ralink,pci-slot = <18>; + + status = "disabled"; + }; + }; + }; + + wmac@10180000 { + compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + ehci@101c0000 { + compatible = "ralink,rt3883-ehci", "ehci-platform"; + reg = <0x101c0000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; + + ohci@101c1000 { + compatible = "ralink,rt3883-ohci", "ohci-platform"; + reg = <0x101c1000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi new file mode 100644 index 000000000..c48d7810f --- /dev/null +++ b/target/linux/ramips/dts/rt5350.dtsi @@ -0,0 +1,188 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt5350-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt5350-timer", "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; + + watchdog@120 { + compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + }; + + intc: intc@200 { + compatible = "ralink,rt5350-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt5350-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <0>; + ralink,num-gpios = <24>; + ralink,register-map = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + + status = "disabled"; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <24>; + ralink,num-gpios = <16>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,gpio-base = <40>; + ralink,num-gpios = <12>; + ralink,register-map = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + + status = "disabled"; + }; + + spi@b00 { + compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; + + ethernet@10100000 { + compatible = "ralink,rt5350-eth", "ralink,rt3050-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + status = "disabled"; + }; + + esw@10110000 { + compatible = "ralink,rt5350-esw", "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; + + status = "disabled"; + }; + + wmac@10180000 { + compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac"; + reg = <0x10180000 40000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + ralink,eeprom = "soc_wmac.eeprom"; + + status = "disabled"; + }; + + ehci@101c0000 { + compatible = "ralink,rt5350-ehci", "ehci-platform"; + reg = <0x101c0000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; + + ohci@101c1000 { + compatible = "ralink,rt5350-ohci", "ohci-platform"; + reg = <0x101c1000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; |