diff options
Diffstat (limited to 'target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram')
| -rwxr-xr-x | target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram | 166 |
1 files changed, 0 insertions, 166 deletions
diff --git a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram deleted file mode 100755 index b985948d7..000000000 --- a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram +++ /dev/null @@ -1,166 +0,0 @@ -#!/bin/sh -# NVRAM setup -# -# This file handles the NVRAM quirks of various hardware. - -. /etc/network.overrides -alias debug=${DEBUG:-:} - -# WGT634u -grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit - -remap () { - for type in lan wifi wan pppoe - do - for s in '' s - do - eval nvram set ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\" - done - done -} - -nvram_default() { - [ -z "$(nvram get $1)" ] && nvram set "$1=$2" -} - -nvram_set() { # for the linksys fixup part - [ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || { - COMMIT=1 - /usr/sbin/nvram set "$1=$2" - } -} - -# work around braindead CFE defaults in linksys routers -boardtype=$(nvram get boardtype) -boardflags=$(($(nvram get boardflags))) -[ "$boardtype" = "bcm94710dev" ] && boardtype="0xdeadbeef" -adm_switch="$(( ($boardflags & 0x80) >> 7 ))" -case "$(( $boardtype ))" in - "$((0x708))") - if [ "$adm_switch" = 0 ]; then - nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" - [ "$COMMIT" = 1 ] && { - nvram_set sdram_config 0x0062 - nvram_set clkfreq 216 - nvram_set sdram_ncdl 0x0 - nvram_set pa0itssit 62 - nvram_set pa0b0 0x15eb - nvram_set pa0b1 0xfa82 - nvram_set pa0b2 0xfe66 - nvram_set pa0maxpwr 0x4e - } - fi - ;; - "$((0x467))") - nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" - [ "$COMMIT" = 1 ] && { - nvram_set sdram_config 0x0062 - nvram_set sdram_ncdl 0x0 - nvram_set pa0itssit 62 - nvram_set pa0b0 0x168b - nvram_set pa0b1 0xfabf - nvram_set pa0b2 0xfeaf - nvram_set pa0maxpwr 0x4e - } - ;; -esac -[ "$COMMIT" = "1" ] && nvram commit - - -# linksys bug; remove when not using static configuration for lan -nvram set lan_proto="static" - -# hacks for wrt54g 1.x hardware -[ "$(nvram get boardnum)" = "42" \ --a "$(nvram get boardtype)" = "bcm94710dev" ] && { - debug "### wrt54g 1.x hack ###" - nvram set vlan1hwname="et0" - nvram set vlan2hwname="et0" - remap eth0 vlan2 - remap eth1 vlan1 -} - -# hacks for asus wl-500g deluxe -[ "$(nvram get boardtype)" = "bcm95365r" \ --a "$(nvram get boardnum)" = "45" ] && { - debug "### wl-500g deluxe hacks ###" - nvram set vlan0hwname="et0" - nvram set vlan1hwname="et0" - remap eth0.1 vlan0 - remap eth0 vlan1 - - # set up the vlan*ports variables for the asus wl-500g deluxe - # if they don't already exist - nvram_default vlan0ports "1 2 3 4 5*" - nvram_default vlan1ports "0 5" -} - -# hacks for asus -case "$(nvram get productid)" in - WL300g) - debug "### wl-300g hacks ###" - nvram set lan_ifnames="eth0 eth2" - nvram set wan_ifname="none" - ;; - WLHDD) - debug "### wl-hdd hacks ###" - nvram set lan_ifnames="eth1 eth2" - nvram set wan_ifname="none" - ;; - *) - # wl-500g defaults. these are placed here, because WL-HDD and WL-300g - # might have the same nvram settings. - [ "$(nvram get boardnum)" = "asusX" \ - -a "$(nvram get boardtype)" = "bcm94710dev" ] && { - nvram_default wan_device "eth1" - } - ;; -esac - -# hacks for wap54g hardware -[ "$(nvram get boardnum)" = "2" \ --o "$(nvram get boardnum)" = "1024" ] && { - debug "### wap54g hack ###" - nvram set wan_ifname="none" -} - -# hacks for buffalo wla2-g54l -[ "$(nvram get boardnum)" = "00" \ --a "$(nvram get product_name)" = "Product_name" \ --o "$(nvram get product_name)" = "WLA2-G54L" ] && { - debug "### wla2-g54l hacks ###" - nvram set wan_ifname="none" - nvram set lan_ifnames="vlan0" -} - -# needed at least for wrt54gs v1.1 and wrt54g v2.0, v2.2 -[ \! -z "$(nvram get boardrev)" ] && { - nvram_default wl0id 0x4320 -} - -# defaults -nvram_default lan_ifname "br0" -nvram_default lan_ifnames "$FAILSAFE_ifnames" - -nvram_default wan_ifname "vlan1" -nvram_default wan_device "vlan1" -nvram_default wan_proto "dhcp" - -nvram_default wl0_ssid OpenWrt -nvram_default wl0_mode ap -nvram_default wl0_infra 1 -nvram_default wl0_radio 1 - -WAN_PROTO="$(nvram get wan_proto)" -WAN_IFNAME="$(nvram get wan_ifname)" -case "$WAN_PROTO" in - pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;; - *) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";; -esac - -[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && { - # if default wifi mac, set two higher than the lan mac - nvram set il0macaddr=$(nvram get et0macaddr| - awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}') -} - |