summaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch')
-rw-r--r--target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch46
1 files changed, 46 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch b/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch
new file mode 100644
index 000000000..3759741db
--- /dev/null
+++ b/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch
@@ -0,0 +1,46 @@
+The Armada XP DB evaluation board has one SD card slot, directly
+connected to the SDIO IP of the SoC, so we add a device tree
+description for it.
+
+However, in the default configuration of the board, the SD card slot
+is not usable: the connector plugged into CON40 must be changed
+against a different one, provided with the board by the
+manufacturer. Since such a manual modification of the hardware is
+needed, we did not enable the SDIO interface by default, and left it
+to the board user to modify the Device Tree if needed. Since this
+board is really only an evaluation board for developers and not a
+final product, it is not too bad.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+[florian: changed status to "okay" for RD-A370-A1]
+ arch/arm/boot/dts/armada-370-db.dts | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
+index 0004402..43ff156 100644
+--- a/arch/arm/boot/dts/armada-370-db.dts
++++ b/arch/arm/boot/dts/armada-370-db.dts
+@@ -59,5 +59,20 @@
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
++
++ mvsdio@d00d4000 {
++ pinctrl-0 = <&sdio_pins1>;
++ pinctrl-names = "default";
++ /*
++ * This device is disabled by default, because
++ * using the SD card connector requires
++ * changing the default CON40 connector
++ * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
++ * different connector
++ * "DB-88F6710_MPP_RGMII_SD_Jumper".
++ */
++ status = "okay";
++ /* No CD or WP GPIOs */
++ };
+ };
+ };
+--
+1.7.9.5