summaryrefslogtreecommitdiffstats
path: root/target/linux/linux-2.4/patches
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/linux-2.4/patches')
-rw-r--r--target/linux/linux-2.4/patches/ar7/000-ar7_support.patch5597
1 files changed, 5597 insertions, 0 deletions
diff --git a/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch b/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch
new file mode 100644
index 000000000..19580b11b
--- /dev/null
+++ b/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch
@@ -0,0 +1,5597 @@
+diff -urN linux-2.4.30/Makefile linux-2.4.30.current/Makefile
+--- linux-2.4.30/Makefile 2005-06-11 20:24:07.000000000 +0200
++++ linux-2.4.30.current/Makefile 2005-06-12 20:14:28.000000000 +0200
+@@ -91,7 +91,7 @@
+
+ CPPFLAGS := -D__KERNEL__ -I$(HPATH)
+
+-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
++CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+ -fno-strict-aliasing -fno-common
+ ifndef CONFIG_FRAME_POINTER
+ CFLAGS += -fomit-frame-pointer
+diff -urN linux-2.4.30/arch/mips/Makefile linux-2.4.30.current/arch/mips/Makefile
+--- linux-2.4.30/arch/mips/Makefile 2005-06-11 20:24:07.000000000 +0200
++++ linux-2.4.30.current/arch/mips/Makefile 2005-06-12 20:14:28.000000000 +0200
+@@ -369,6 +369,16 @@
+ endif
+
+ #
++# Texas Instruments AR7
++#
++
++ifdef CONFIG_AR7
++LIBS += arch/mips/ar7/ar7.o arch/mips/ar7/avalanche/avalanche.o
++SUBDIRS += arch/mips/ar7 arch/mips/ar7/avalanche
++LOADADDR += 0x94020000
++endif
++
++#
+ # DECstation family
+ #
+ ifdef CONFIG_DECSTATION
+diff -urN linux-2.4.30/arch/mips/ar7/Makefile linux-2.4.30.current/arch/mips/ar7/Makefile
+--- linux-2.4.30/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/Makefile 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,12 @@
++.S.s:
++ $(CPP) $(AFLAGS) $< -o $*.s
++
++.S.o:
++ $(CC) $(AFLAGS) -c $< -o $*.o
++
++O_TARGET := ar7.o
++
++obj-y := tnetd73xx_misc.o
++obj-y += setup.o irq.o mipsIRQ.o reset.o init.o memory.o printf.o cmdline.o time.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux-2.4.30/arch/mips/ar7/avalanche/Makefile linux-2.4.30.current/arch/mips/ar7/avalanche/Makefile
+--- linux-2.4.30/arch/mips/ar7/avalanche/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/avalanche/Makefile 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,13 @@
++.S.s:
++ $(CPP) $(AFLAGS) $< -o $*.s
++
++.S.o:
++ $(CC) $(AFLAGS) -c $< -o $*.o
++
++EXTRA_CFLAGS := -DLITTLE_ENDIAN -D_LINK_KSEG0_
++
++O_TARGET := avalanche.o
++
++obj-y += avalanche_paging.o avalanche_jump.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux-2.4.30/arch/mips/ar7/avalanche/avalanche_jump.S linux-2.4.30.current/arch/mips/ar7/avalanche/avalanche_jump.S
+--- linux-2.4.30/arch/mips/ar7/avalanche/avalanche_jump.S 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/avalanche/avalanche_jump.S 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,69 @@
++#include <linux/config.h>
++#include <linux/threads.h>
++
++#include <asm/asm.h>
++#include <asm/cacheops.h>
++#include <asm/current.h>
++#include <asm/offset.h>
++#include <asm/processor.h>
++#include <asm/regdef.h>
++#include <asm/cachectl.h>
++#include <asm/mipsregs.h>
++#include <asm/stackframe.h>
++
++.text
++
++.set noreorder
++.set noat
++
++/* TLB Miss Vector */
++
++LEAF(jump_tlb_miss)
++ .set mips2
++ lui k0,0x9400
++ ori k0,0
++ jr k0
++ nop
++END(jump_tlb_miss)
++
++ /* Unused TLB Miss Vector */
++
++LEAF(jump_tlb_miss_unused)
++ .set mips2
++ lui k0,0x9400
++ ori k0,0x80
++ jr k0
++ nop
++END(jump_tlb_miss_unused)
++
++ /* Cache Error Vector */
++
++LEAF(jump_cache_error)
++ .set mips2
++ lui k0,0x9400
++ ori k0,0x100
++ jr k0
++ nop
++END(jump_cache_error)
++
++ /* General Exception */
++
++LEAF(jump_general_exception)
++ .set mips2
++ lui k0,0x9400
++ ori k0,0x180
++ jr k0
++ nop
++END(jump_general_exception)
++
++ /* Dedicated Interrupt */
++
++LEAF(jump_dedicated_interrupt)
++ .set mips2
++ lui k0,0x9400
++ ori k0,0x200
++ jr k0
++ nop
++END(jump_dedicated_interrupt)
++
++ .set at
+diff -urN linux-2.4.30/arch/mips/ar7/avalanche/avalanche_paging.c linux-2.4.30.current/arch/mips/ar7/avalanche/avalanche_paging.c
+--- linux-2.4.30/arch/mips/ar7/avalanche/avalanche_paging.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/avalanche/avalanche_paging.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,314 @@
++/*
++ * -*- linux-c -*-
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2002 by Jeff Harrell (jharrell@ti.com)
++ * Copyright (C) 2002 Texas Instruments, Inc.
++ *
++ */
++
++/*
++ * This file takes care of the "memory hole" issue that exists with the standard
++ * linux kernel and the TI Avalanche ASIC. The Avalanche ASIC requires an offset
++ * of 0x14000000 due to the ASIC's memory map constraints. This file corrects the
++ * paging tables so that the only reflect valid memory (i.e. > 0x14000000)
++ *
++ * -JAH
++ */
++#include <linux/config.h>
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/types.h>
++#include <linux/ptrace.h>
++#include <linux/mman.h>
++#include <linux/mm.h>
++#include <linux/swap.h>
++#include <linux/smp.h>
++#include <linux/init.h>
++#ifdef CONFIG_BLK_DEV_INITRD
++#include <linux/blk.h>
++#endif /* CONFIG_BLK_DEV_INITRD */
++#include <linux/highmem.h>
++#include <linux/bootmem.h>
++
++#include <asm/processor.h>
++#include <asm/system.h>
++#include <asm/uaccess.h>
++#include <asm/pgtable.h>
++#include <asm/pgalloc.h>
++#include <asm/mmu_context.h>
++#include <asm/io.h>
++#include <asm/tlb.h>
++#include <asm/cpu.h>
++
++#define __MEMORY_START CONFIG_AR7_MEMORY
++
++#ifdef CONFIG_DISCONTIGMEM
++pg_data_t discontig_page_data[NR_NODES];
++bootmem_data_t discontig_node_bdata[NR_NODES];
++#endif
++
++static unsigned long totalram_pages;
++/* static unsigned long totalhigh_pages; */
++
++#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
++#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
++
++#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
++#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
++#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
++
++unsigned long bootmap_size;
++
++extern char *prom_getenv(char *envname);
++
++/*
++ * We have upto 8 empty zeroed pages so we can map one of the right colour
++ * when needed. This is necessary only on R4000 / R4400 SC and MC versions
++ * where we have to avoid VCED / VECI exceptions for good performance at
++ * any price. Since page is never written to after the initialization we
++ * don't have to care about aliases on other CPUs.
++ */
++
++static inline unsigned long setup_zero_pages(void)
++{
++ unsigned long order, size;
++ struct page *page;
++ if(current_cpu_data.options & MIPS_CPU_VCE)
++ order = 3;
++ else
++ order = 0;
++
++ empty_zero_page = __get_free_pages(GFP_KERNEL, order);
++
++ if (!empty_zero_page)
++ panic("Oh boy, that early out of memory?");
++
++ page = virt_to_page(empty_zero_page);
++
++ while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) {
++ set_bit(PG_reserved, &page->flags);
++ set_page_count(page, 0);
++ page++;
++ }
++
++ size = PAGE_SIZE << order;
++ zero_page_mask = (size - 1) & PAGE_MASK;
++ memset((void *)empty_zero_page, 0, size);
++
++ return 1UL << order;
++}
++
++/*
++ * paging_init() sets up the page tables
++ *
++ * This routines also unmaps the page at virtual kernel address 0, so
++ * that we can trap those pesky NULL-reference errors in the kernel.
++ */
++void __init paging_init(void)
++{
++ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
++ unsigned long low, start_pfn;
++
++ /* Initialize the entire pgd. */
++ pgd_init((unsigned long)swapper_pg_dir);
++ pgd_init((unsigned long)swapper_pg_dir + PAGE_SIZE / 2);
++
++
++ start_pfn = START_PFN;
++ // max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
++ low = MAX_LOW_PFN;
++
++ /* Avalanche DMA-able memory 0x14000000+memsize */
++
++ zones_size[ZONE_DMA] = low - start_pfn;
++
++ free_area_init_node(0, NODE_DATA(0), 0, zones_size, __MEMORY_START, 0);
++
++#ifdef CONFIG_DISCONTIGMEM
++ zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT;
++ zones_size[ZONE_NORMAL] = 0;
++ free_area_init_node(1, NODE_DATA(1), 0, zones_size, __MEMORY_START_2ND, 0);
++#endif /* CONFIG_DISCONTIGMEM */
++
++}
++
++extern char _ftext, _etext, _fdata, _edata, _end;
++extern char __init_begin, __init_end;
++
++void __init mem_init(void)
++{
++ int codesize, reservedpages, datasize, initsize;
++ int tmp;
++
++ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
++ high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
++
++ /* free up the memory associated with Adam2 -
++ * that is the, after the first page that is
++ * reserved all the way up to the start of the kernel
++ */
++ free_bootmem_node(NODE_DATA(0), (__MEMORY_START+PAGE_SIZE),
++ (__pa(&_ftext))-(__MEMORY_START+PAGE_SIZE) );
++
++ /* this will put all low memory onto the freelists */
++ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
++
++ /* Setup zeroed pages */
++ totalram_pages -= setup_zero_pages();
++
++
++#ifdef CONFIG_DISCONTIGMEM
++ totalram_pages += free_all_bootmem_node(NODE_DATA(1));
++#endif
++ reservedpages = 0;
++ for (tmp = 0; tmp < num_physpages; tmp++)
++ /*
++ * Only count reserved RAM pages
++ */
++ if (PageReserved(mem_map+tmp))
++ reservedpages++;
++
++ codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
++ datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
++ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
++
++ printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
++ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
++ max_mapnr << (PAGE_SHIFT-10),
++ codesize >> 10,
++ reservedpages << (PAGE_SHIFT-10),
++ datasize >> 10,
++ initsize >> 10);
++
++}
++
++/* fixes paging routines for avalanche (utilized in /arch/mips/kernel/setup.c) */
++
++void avalanche_bootmem_init(void)
++{
++ unsigned long start_pfn, max_pfn;
++ unsigned long max_low_pfn;
++ unsigned int memsize,memory_end,memory_start;
++ char *memsize_str;
++
++ memsize_str = prom_getenv("memsize");
++ if (!memsize_str) {
++ memsize = 0x02000000;
++ } else {
++ memsize = simple_strtol(memsize_str, NULL, 0);
++ }
++
++
++ memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
++ memory_end = memory_start + memsize;
++
++ /*
++ * Find the highest memory page fram number we have available
++ */
++
++ max_pfn = PFN_DOWN(__pa(memory_end));
++
++ /*
++ * Determine the low and high memory ranges
++ */
++
++ max_low_pfn = max_pfn;
++
++ /*
++ * Partially used pages are not usable - thus we are
++ * rounding upwards:
++ */
++
++ start_pfn = PFN_UP(__pa(&_end));
++
++ /*
++ * Find a proper area for the bootmem bitmap. After this
++ * bootstrap step all allocations (until the page allocator is
++ * intact) must be done via bootmem_alloc().
++ */
++
++ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
++ __MEMORY_START>>PAGE_SHIFT, max_low_pfn);
++
++
++ /*
++ * Register fully available low RAM pages with the bootmem allocator.
++ */
++
++ {
++ unsigned long curr_pfn, last_pfn, pages;
++
++ /*
++ * We are rounding up the start address of usable memory:
++ */
++ curr_pfn = PFN_UP(__MEMORY_START);
++
++ /*
++ * ... and at the end of the usable range downwards:
++ */
++ last_pfn = PFN_DOWN(__pa(memory_end));
++
++ if (last_pfn > max_low_pfn)
++ last_pfn = max_low_pfn;
++
++ pages = last_pfn - curr_pfn;
++
++
++ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
++ PFN_PHYS(pages));
++ }
++
++ /*
++ * Reserve the kernel text and
++ * Reserve the bootmem bitmap. We do this in two steps (first step
++ * was init_bootmem()), because this catches the (definitely buggy)
++ * case of us accidentally initializing the bootmem allocator with
++ * an invalid RAM area.
++ */
++ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE,
++ (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
++
++ /*
++ * reserve physical page 0 - it's a special BIOS page on many boxes,
++ * enabling clean reboots, SMP operation, laptop functions.
++ */
++ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);
++}
++
++extern char __init_begin, __init_end;
++
++void free_initmem(void)
++{
++ unsigned long addr;
++ // prom_free_prom_memory ();
++
++ addr = (unsigned long) &__init_begin;
++ while (addr < (unsigned long) &__init_end) {
++ ClearPageReserved(virt_to_page(addr));
++ set_page_count(virt_to_page(addr), 1);
++ free_page(addr);
++ totalram_pages++;
++ addr += PAGE_SIZE;
++ }
++ printk("Freeing unused kernel memory: %dk freed\n",
++ (&__init_end - &__init_begin) >> 10);
++}
++
++void si_meminfo(struct sysinfo *val)
++{
++ val->totalram = totalram_pages;
++ val->sharedram = 0;
++ val->freeram = nr_free_pages();
++ val->bufferram = atomic_read(&buffermem_pages);
++ val->totalhigh = 0;
++ val->freehigh = nr_free_highpages();
++ val->mem_unit = PAGE_SIZE;
++
++ return;
++}
+diff -urN linux-2.4.30/arch/mips/ar7/cmdline.c linux-2.4.30.current/arch/mips/ar7/cmdline.c
+--- linux-2.4.30/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/cmdline.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,64 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
++ */
++#include <linux/init.h>
++#include <linux/string.h>
++
++#include <asm/bootinfo.h>
++
++extern int prom_argc;
++extern int *_prom_argv;
++
++/*
++ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
++ * This macro take care of sign extension.
++ */
++#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
++
++char arcs_cmdline[CL_SIZE];
++
++char * __init prom_getcmdline(void)
++{
++ return &(arcs_cmdline[0]);
++}
++
++
++void __init prom_init_cmdline(void)
++{
++ char *cp;
++ int actr;
++
++ actr = 1; /* Always ignore argv[0] */
++
++ cp = &(arcs_cmdline[0]);
++#ifdef CONFIG_CMDLINE_BOOL
++ strcpy(cp, CONFIG_CMDLINE);
++ cp += strlen(CONFIG_CMDLINE);
++ *cp++ = ' ';
++#endif
++ while(actr < prom_argc) {
++ strcpy(cp, prom_argv(actr));
++ cp += strlen(prom_argv(actr));
++ *cp++ = ' ';
++ actr++;
++ }
++ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
++ --cp;
++ *cp = '\0';
++}
+diff -urN linux-2.4.30/arch/mips/ar7/init.c linux-2.4.30.current/arch/mips/ar7/init.c
+--- linux-2.4.30/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/init.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,127 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * PROM library initialisation code.
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++
++#include <asm/io.h>
++#include <asm/mips-boards/prom.h>
++#include <asm/mips-boards/generic.h>
++
++/* Environment variable */
++typedef struct {
++ char *name;
++ char *val;
++} t_env_var;
++
++int prom_argc;
++int *_prom_argv, *_prom_envp;
++
++/*
++ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
++ * This macro take care of sign extension, if running in 64-bit mode.
++ */
++#define prom_envp(index) ((char *)(((int *)(int)_prom_envp)[(index)]))
++
++int init_debug = 0;
++
++char *prom_getenv(char *envname)
++{
++ /*
++ * Return a pointer to the given environment variable.
++ * In 64-bit mode: we're using 64-bit pointers, but all pointers
++ * in the PROM structures are only 32-bit, so we need some
++ * workarounds, if we are running in 64-bit mode.
++ */
++ int i, index=0;
++
++ i = strlen(envname);
++
++ while (prom_envp(index)) {
++ if(strncmp(envname, prom_envp(index), i) == 0) {
++ return(prom_envp(index+1));
++ }
++ index += 2;
++ }
++
++ return NULL;
++}
++
++static inline unsigned char str2hexnum(unsigned char c)
++{
++ if (c >= '0' && c <= '9')
++ return c - '0';
++ if (c >= 'a' && c <= 'f')
++ return c - 'a' + 10;
++ return 0; /* foo */
++}
++
++static inline void str2eaddr(unsigned char *ea, unsigned char *str)
++{
++ int i;
++
++ for (i = 0; i < 6; i++) {
++ unsigned char num;
++
++ if((*str == '.') || (*str == ':'))
++ str++;
++ num = str2hexnum(*str++) << 4;
++ num |= (str2hexnum(*str++));
++ ea[i] = num;
++ }
++}
++
++int get_ethernet_addr(char *ethernet_addr)
++{
++ char *ethaddr_str;
++
++ ethaddr_str = prom_getenv("ethaddr");
++ if (!ethaddr_str) {
++ printk("ethaddr not set in boot prom\n");
++ return -1;
++ }
++ str2eaddr(ethernet_addr, ethaddr_str);
++
++ if (init_debug > 1) {
++ int i;
++ printk("get_ethernet_addr: ");
++ for (i=0; i<5; i++)
++ printk("%02x:", (unsigned char)*(ethernet_addr+i));
++ printk("%02x\n", *(ethernet_addr+i));
++ }
++
++ return 0;
++}
++
++int __init prom_init(int argc, char **argv, char **envp)
++{
++ prom_argc = argc;
++ _prom_argv = (int *)argv;
++ _prom_envp = (int *)envp;
++
++ set_io_port_base(0);
++
++ prom_printf("\nLINUX started...\n");
++ prom_init_cmdline();
++ prom_meminit();
++
++ return 0;
++}
+diff -urN linux-2.4.30/arch/mips/ar7/irq.c linux-2.4.30.current/arch/mips/ar7/irq.c
+--- linux-2.4.30/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/irq.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,669 @@
++/*
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Routines for generic manipulation of the interrupts found on the Texas
++ * Instruments avalanche board
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/proc_fs.h>
++#include <asm/irq.h>
++#include <asm/mips-boards/prom.h>
++#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
++#include <asm/gdb-stub.h>
++
++
++#define shutdown_avalanche_irq disable_avalanche_irq
++#define mask_and_ack_avalanche_irq disable_avalanche_irq
++
++static unsigned int startup_avalanche_irq(unsigned int irq);
++static void end_avalanche_irq(unsigned int irq);
++void enable_avalanche_irq(unsigned int irq_nr);
++void disable_avalanche_irq(unsigned int irq_nr);
++
++static struct hw_interrupt_type avalanche_irq_type = {
++ "TI AVALANCHE",
++ startup_avalanche_irq,
++ shutdown_avalanche_irq,
++ enable_avalanche_irq,
++ disable_avalanche_irq,
++ mask_and_ack_avalanche_irq,
++ end_avalanche_irq,
++ NULL
++};
++
++irq_desc_t irq_desc_ti[AVALANCHE_INT_END+1] __cacheline_aligned =
++{ [0 ... AVALANCHE_INT_END] = { 0, &avalanche_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}};
++
++
++unsigned long spurious_count = 0;
++
++struct avalanche_ictrl_regs *avalanche_hw0_icregs; /* Interrupt control regs (primary) */
++struct avalanche_exctrl_regs *avalanche_hw0_ecregs; /* Exception control regs (secondary) */
++struct avalanche_ipace_regs *avalanche_hw0_ipaceregs;
++struct avalanche_channel_int_number *avalanche_hw0_chregs; /* Channel control registers */
++
++extern asmlinkage void mipsIRQ(void);
++
++
++/*
++ * The avalanche/MIPS interrupt line numbers are used to represent the
++ * interrupts within the irqaction arrays. The index notation is
++ * is as follows:
++ *
++ * 0-7 MIPS CPU Exceptions (HW/SW)
++ * 8-47 Primary Interrupts (Avalanche)
++ * 48-79 Secondary Interrupts (Avalanche)
++ *
++ */
++
++
++static struct irqaction *hw0_irq_action_primary[AVINTNUM(AVALANCHE_INT_END_PRIMARY)] =
++{
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL
++};
++
++static struct irqaction *hw0_irq_action_secondary[AVINTNUM(AVALANCHE_INT_END_SECONDARY)] =
++{
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL,
++ NULL, NULL, NULL, NULL
++};
++
++/*
++ This remaps interrupts to exist on other channels than the default
++ channels. essentially we can use the line # as the index for this
++ array
++ */
++
++
++static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
++unsigned long uni_secondary_interrupt = 0;
++
++static struct irqaction r4ktimer_action = {
++ NULL, 0, 0, "R4000 timer/counter", NULL, NULL,
++};
++
++static struct irqaction *irq_action[8] = {
++ NULL, /* SW int 0 */
++ NULL, /* SW int 1 */
++ NULL, /* HW int 0 */
++ NULL,
++ NULL,
++ NULL, /* HW int 3 */
++ NULL, /* HW int 4 */
++ &r4ktimer_action /* HW int 5 */
++};
++
++static void end_avalanche_irq(unsigned int irq)
++{
++ if (!(irq_desc_ti[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ enable_avalanche_irq(irq);
++}
++
++void disable_avalanche_irq(unsigned int irq_nr)
++{
++ unsigned long flags;
++ unsigned long chan_nr=0;
++ unsigned long int_bit=0;
++
++ if(irq_nr >= AVALANCHE_INT_END)
++ {
++ printk("whee, invalid irq_nr %d\n", irq_nr);
++ panic("IRQ, you lose...");
++ }
++
++ save_and_cli(flags);
++
++
++ if(irq_nr < MIPS_EXCEPTION_OFFSET)
++ {
++ /* disable mips exception */
++
++ int_bit = read_c0_status() & ~(1 << (8+irq_nr));
++ change_c0_status(ST0_IM,int_bit);
++ restore_flags(flags);
++ return;
++ }
++
++ /* irq_nr represents the line number for the interrupt. We must
++ * disable the channel number associated with that line number.
++ */
++
++ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++ chan_nr = AVINTNUM(irq_nr); /*CHECK THIS ALSO*/
++ else
++ chan_nr = line_to_channel[AVINTNUM(irq_nr)];/* WE NEED A LINE TO CHANNEL MAPPING FUNCTION HERE*/
++
++ /* disable the interrupt channel bit */
++
++ /* primary interrupt #'s 0-31 */
++
++ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++ avalanche_hw0_icregs->intecr1 = (1 << chan_nr);
++
++ /* primary interrupt #'s 32-39 */
++
++ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++ avalanche_hw0_icregs->intecr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++
++ else /* secondary interrupt #'s 0-31 */
++ avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++
++ restore_flags(flags);
++}
++
++void enable_avalanche_irq(unsigned int irq_nr)
++{
++ unsigned long flags;
++ unsigned long chan_nr=0;
++ unsigned long int_bit=0;
++
++ if(irq_nr > AVALANCHE_INT_END) {
++ printk("whee, invalid irq_nr %d\n", irq_nr);
++ panic("IRQ, you lose...");
++ }
++
++ save_and_cli(flags);
++
++
++ if(irq_nr < MIPS_EXCEPTION_OFFSET)
++ {
++ /* Enable MIPS exceptions */
++ int_bit = read_c0_status();
++ change_c0_status(ST0_IM,int_bit | (1<<(8+irq_nr)));
++ restore_flags(flags);
++ return;
++ }
++
++ /* irq_nr represents the line number for the interrupt. We must
++ * disable the channel number associated with that line number.
++ */
++
++ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++ chan_nr = AVINTNUM(irq_nr);
++ else
++ chan_nr = line_to_channel[AVINTNUM(irq_nr)];
++
++ /* enable the interrupt channel bit */
++
++ /* primary interrupt #'s 0-31 */
++ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++ avalanche_hw0_icregs->intesr1 = (1 << chan_nr);
++
++ /* primary interrupt #'s 32 throuth 39 */
++ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++ avalanche_hw0_icregs->intesr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++
++ else /* secondary interrupt #'s 0-31 */
++ avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++
++ restore_flags(flags);
++}
++
++static unsigned int startup_avalanche_irq(unsigned int irq)
++{
++ enable_avalanche_irq(irq);
++ return 0; /* never anything pending */
++}
++
++
++int get_irq_list(char *buf)
++{
++ int i, len = 0;
++ int num = 0;
++ struct irqaction *action;
++
++ for (i = 0; i < MIPS_EXCEPTION_OFFSET; i++, num++)
++ {
++ action = irq_action[i];
++ if (!action)
++ continue;
++ len += sprintf(buf+len, "%2d: %8d %c %s",
++ num, kstat.irqs[0][num],
++ (action->flags & SA_INTERRUPT) ? '+' : ' ',
++ action->name);
++ for (action=action->next; action; action = action->next) {
++ len += sprintf(buf+len, ",%s %s",
++ (action->flags & SA_INTERRUPT) ? " +" : "",
++ action->name);
++ }
++ len += sprintf(buf+len, " [MIPS interrupt]\n");
++ }
++
++
++ for (i = 0; i < AVINTNUM(AVALANCHE_INT_END); i++,num++)
++ {
++ if(i < AVINTNUM(AVALANCHE_INT_END_PRIMARY))
++ action = hw0_irq_action_primary[i];
++ else
++ action = hw0_irq_action_secondary[i-AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
++ if (!action)
++ continue;
++ len += sprintf(buf+len, "%2d: %8d %c %s",
++ num, kstat.irqs[0][ LNXINTNUM(i) ],
++ (action->flags & SA_INTERRUPT) ? '+' : ' ',
++ action->name);
++
++ for (action=action->next; action; action = action->next)
++ {
++ len += sprintf(buf+len, ",%s %s",
++ (action->flags & SA_INTERRUPT) ? " +" : "",
++ action->name);
++ }
++
++ if(i < AVINTNUM(AVALANCHE_INT_END_PRIMARY))
++ len += sprintf(buf+len, " [hw0 (Avalanche Primary)]\n");
++ else
++ len += sprintf(buf+len, " [hw0 (Avalanche Secondary)]\n");
++
++ }
++
++ return len;
++}
++
++int request_irq(unsigned int irq,
++ void (*handler)(int, void *, struct pt_regs *),
++ unsigned long irqflags,
++ const char * devname,
++ void *dev_id)
++{
++ struct irqaction *action;
++
++ if (irq > AVALANCHE_INT_END)
++ return -EINVAL;
++ if (!handler)
++ return -EINVAL;
++
++ action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
++ if(!action)
++ return -ENOMEM;
++
++ action->handler = handler;
++ action->flags = irqflags;
++ action->mask = 0;
++ action->name = devname;
++ irq_desc_ti[irq].action = action;
++ action->dev_id = dev_id;
++
++ action->next = 0;
++
++ if(irq < MIPS_EXCEPTION_OFFSET)
++ {
++ irq_action[irq] = action;
++ enable_avalanche_irq(irq);
++ return 0;
++ }
++
++ if(irq < AVALANCHE_INT_END_PRIMARY)
++ hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]] = action;
++ else
++ hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY] = action;
++
++ enable_avalanche_irq(irq);
++
++ return 0;
++}
++
++void free_irq(unsigned int irq, void *dev_id)
++{
++ struct irqaction *action;
++
++ if (irq > AVALANCHE_INT_END) {
++ printk("Trying to free IRQ%d\n",irq);
++ return;
++ }
++
++ if(irq < MIPS_EXCEPTION_OFFSET)
++ {
++ action = irq_action[irq];
++ irq_action[irq] = NULL;
++ irq_desc_ti[irq].action = NULL;
++ disable_avalanche_irq(irq);
++ kfree(action);
++ return;
++ }
++
++ if(irq < AVALANCHE_INT_END_PRIMARY) {
++ action = hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]];
++ hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]] = NULL;
++ irq_desc_ti[irq].action = NULL;
++ }
++ else {
++ action = hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY];
++ hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY] = NULL;
++ irq_desc_ti[irq].action = NULL;
++ }
++
++ disable_avalanche_irq(irq);
++ kfree(action);
++}
++
++#ifdef CONFIG_KGDB
++extern void breakpoint(void);
++extern int remote_debug;
++#endif
++
++//void init_IRQ(void) __init;
++void __init init_IRQ(void)
++{
++ int i;
++
++ avalanche_hw0_icregs = (struct avalanche_ictrl_regs *)AVALANCHE_ICTRL_REGS_BASE;
++ avalanche_hw0_ecregs = (struct avalanche_exctrl_regs *)AVALANCHE_ECTRL_REGS_BASE;
++ avalanche_hw0_ipaceregs = (struct avalanche_ipace_regs *)AVALANCHE_IPACE_REGS_BASE;
++ avalanche_hw0_chregs = (struct avalanche_channel_int_number *)AVALANCHE_CHCTRL_REGS_BASE;
++
++ /* Disable interrupts and clear pending
++ */
++
++ avalanche_hw0_icregs->intecr1 = 0xffffffff; /* disable interrupts 0:31 */
++ avalanche_hw0_icregs->intcr1 = 0xffffffff; /* clear interrupts 0:31 */
++ avalanche_hw0_icregs->intecr2 = 0xff; /* disable interrupts 32:39 */
++ avalanche_hw0_icregs->intcr2 = 0xff; /* clear interrupts 32:39 */
++ avalanche_hw0_ecregs->exiecr = 0xffffffff; /* disable secondary interrupts 0:31 */
++ avalanche_hw0_ecregs->excr = 0xffffffff; /* clear secondary interrupts 0:31 */
++
++
++ // avalanche_hw0_ipaceregs->ipacep = (2*get_avalanche_vbus_freq()/1000000)*4;
++ /* hack for speeding up the pacing. */
++ printk("the pacing pre-scalar has been set as 600.\n");
++ avalanche_hw0_ipaceregs->ipacep = 600;
++ /* Channel to line mapping, Line to Channel mapping */
++
++ for(i = 0; i < 40; i++)
++ avalanche_int_set(i,i);
++
++ /* Now safe to set the exception vector. */
++ set_except_vector(0, mipsIRQ);
++
++ /* Setup the IRQ description array. These will be mapped
++ * as flat interrupts numbers. The mapping is as follows
++ *
++ * 0-7 MIPS CPU Exceptions (HW/SW)
++ * 8-46 Primary Interrupts (Avalanche)
++ * 47-78 Secondary Interrupts (Avalanche)
++ */
++
++ for (i = 0; i <= AVALANCHE_INT_END; i++)
++ {
++ irq_desc_ti[i].status = IRQ_DISABLED;
++ irq_desc_ti[i].action = 0;
++ irq_desc_ti[i].depth = 1;
++ irq_desc_ti[i].handler = &avalanche_irq_type;
++ }
++
++#ifdef CONFIG_KGDB
++ if (remote_debug)
++ {
++ set_debug_traps();
++ breakpoint();
++ }
++#endif
++}
++
++
++void avalanche_hw0_irqdispatch(struct pt_regs *regs)
++{
++ struct irqaction *action;
++ int irq, cpu = smp_processor_id();
++ unsigned long int_line_number,status;
++ int i,secondary = 0;
++ int chan_nr=0;
++
++ int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F);
++ chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F);
++
++
++ if(chan_nr < 32)
++ {
++ if( chan_nr != uni_secondary_interrupt)
++ avalanche_hw0_icregs->intcr1 = (1<<chan_nr);
++
++ }
++
++ if((chan_nr < 40) && (chan_nr > 31))
++ {
++ avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++ }
++
++
++ /* If the Priority Interrupt Index Register returns 40 then no
++ * interrupts are pending
++ */
++
++ if(chan_nr == 40)
++ return;
++
++ if(chan_nr == uni_secondary_interrupt)
++ {
++ status = avalanche_hw0_ecregs->exsr;
++ for(i=0; i < AVINTNUM(AVALANCHE_INT_END_SECONDARY); i++)
++ {
++ if (status & 1<<i)
++ {
++ /* clear secondary interrupt */
++ avalanche_hw0_ecregs->excr = 1 << i;
++ break;
++ }
++ }
++ irq = i;
++ secondary = 1;
++
++ /* clear the universal secondary interrupt */
++ avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt;
++
++ }
++ else
++ irq = chan_nr;
++
++ /* Suraj Add code to clear secondary interrupt */
++
++ if(secondary)
++ action = hw0_irq_action_secondary[irq];
++ else
++ action = hw0_irq_action_primary[irq];
++
++ /* if action == NULL, then we don't have a handler for the irq */
++
++ if ( action == NULL ) {
++ printk("No handler for hw0 irq: %i\n", irq);
++ return;
++ }
++
++ irq_enter(cpu,irq);
++ if(secondary)
++ {
++ kstat.irqs[0][(irq + AVINTNUM(AVALANCHE_INT_END_PRIMARY)) + 8]++;
++ action->handler((irq + AVALANCHE_INT_END_PRIMARY), action->dev_id, regs);
++ }
++ else
++ {
++ kstat.irqs[0][irq + 8]++;
++ action->handler(LNXINTNUM(irq), action->dev_id, regs);
++ }
++
++ irq_exit(cpu,irq);
++
++ if(softirq_pending(cpu))
++ do_softirq();
++
++ return;
++}
++
++void avalanche_int_set(int channel, int line)
++{
++ switch(channel)
++ {
++ case(0):
++ avalanche_hw0_chregs->cintnr0 = line;
++ break;
++ case(1):
++ avalanche_hw0_chregs->cintnr1 = line;
++ break;
++ case(2):
++ avalanche_hw0_chregs->cintnr2 = line;
++ break;
++ case(3):
++ avalanche_hw0_chregs->cintnr3 = line;
++ break;
++ case(4):
++ avalanche_hw0_chregs->cintnr4 = line;
++ break;
++ case(5):
++ avalanche_hw0_chregs->cintnr5 = line;
++ break;
++ case(6):
++ avalanche_hw0_chregs->cintnr6 = line;
++ break;
++ case(7):
++ avalanche_hw0_chregs->cintnr7 = line;
++ break;
++ case(8):
++ avalanche_hw0_chregs->cintnr8 = line;
++ break;
++ case(9):
++ avalanche_hw0_chregs->cintnr9 = line;
++ break;
++ case(10):
++ avalanche_hw0_chregs->cintnr10 = line;
++ break;
++ case(11):
++ avalanche_hw0_chregs->cintnr11 = line;
++ break;
++ case(12):
++ avalanche_hw0_chregs->cintnr12 = line;
++ break;
++ case(13):
++ avalanche_hw0_chregs->cintnr13 = line;
++ break;
++ case(14):
++ avalanche_hw0_chregs->cintnr14 = line;
++ break;
++ case(15):
++ avalanche_hw0_chregs->cintnr15 = line;
++ break;
++ case(16):
++ avalanche_hw0_chregs->cintnr16 = line;
++ break;
++ case(17):
++ avalanche_hw0_chregs->cintnr17 = line;
++ break;
++ case(18):
++ avalanche_hw0_chregs->cintnr18 = line;
++ break;
++ case(19):
++ avalanche_hw0_chregs->cintnr19 = line;
++ break;
++ case(20):
++ avalanche_hw0_chregs->cintnr20 = line;
++ break;
++ case(21):
++ avalanche_hw0_chregs->cintnr21 = line;
++ break;
++ case(22):
++ avalanche_hw0_chregs->cintnr22 = line;
++ break;
++ case(23):
++ avalanche_hw0_chregs->cintnr23 = line;
++ break;
++ case(24):
++ avalanche_hw0_chregs->cintnr24 = line;
++ break;
++ case(25):
++ avalanche_hw0_chregs->cintnr25 = line;
++ break;
++ case(26):
++ avalanche_hw0_chregs->cintnr26 = line;
++ break;
++ case(27):
++ avalanche_hw0_chregs->cintnr27 = line;
++ break;
++ case(28):
++ avalanche_hw0_chregs->cintnr28 = line;
++ break;
++ case(29):
++ avalanche_hw0_chregs->cintnr29 = line;
++ break;
++ case(30):
++ avalanche_hw0_chregs->cintnr30 = line;
++ break;
++ case(31):
++ avalanche_hw0_chregs->cintnr31 = line;
++ break;
++ case(32):
++ avalanche_hw0_chregs->cintnr32 = line;
++ break;
++ case(33):
++ avalanche_hw0_chregs->cintnr33 = line;
++ break;
++ case(34):
++ avalanche_hw0_chregs->cintnr34 = line;
++ break;
++ case(35):
++ avalanche_hw0_chregs->cintnr35 = line;
++ break;
++ case(36):
++ avalanche_hw0_chregs->cintnr36 = line;
++ break;
++ case(37):
++ avalanche_hw0_chregs->cintnr37 = line;
++ break;
++ case(38):
++ avalanche_hw0_chregs->cintnr38 = line;
++ break;
++ case(39):
++ avalanche_hw0_chregs->cintnr39 = line;
++ break;
++ default:
++ printk("Error: Unknown Avalanche interrupt channel\n");
++ }
++
++ line_to_channel[line] = channel; /* Suraj check */
++
++ if (channel == UNIFIED_SECONDARY_INTERRUPT)
++ uni_secondary_interrupt = line;
++
++}
++
+diff -urN linux-2.4.30/arch/mips/ar7/memory.c linux-2.4.30.current/arch/mips/ar7/memory.c
+--- linux-2.4.30/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/memory.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,130 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * PROM library functions for acquiring/using memory descriptors given to
++ * us from the YAMON.
++ *
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/page.h>
++#include <asm/mips-boards/prom.h>
++#include <asm/ar7/ar7.h>
++
++enum yamon_memtypes {
++ yamon_dontuse,
++ yamon_prom,
++ yamon_free,
++};
++struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
++
++/* References to section boundaries */
++extern char _end;
++
++#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
++
++
++struct prom_pmemblock * __init prom_getmdesc(void)
++{
++ char *memsize_str;
++ unsigned int memsize;
++
++ memsize_str = prom_getenv("memsize");
++ if (!memsize_str) {
++ memsize = 0x02000000;
++ } else {
++ memsize = simple_strtol(memsize_str, NULL, 0);
++ }
++
++ memset(mdesc, 0, sizeof(mdesc));
++
++ mdesc[0].type = yamon_dontuse;
++ mdesc[0].base = 0x00000000;
++ mdesc[0].size = AVALANCHE_SDRAM_BASE;
++
++ mdesc[1].type = yamon_prom;
++ mdesc[1].base = AVALANCHE_SDRAM_BASE;
++ mdesc[1].size = 0x00020000;
++
++ mdesc[2].type = yamon_free;
++ mdesc[2].base = AVALANCHE_SDRAM_BASE + 0x00020000;
++ mdesc[2].size = (memsize + AVALANCHE_SDRAM_BASE) - mdesc[2].base;
++
++ return &mdesc[0];
++}
++
++static int __init prom_memtype_classify (unsigned int type)
++{
++ switch (type) {
++ case yamon_free:
++ return BOOT_MEM_RAM;
++ case yamon_prom:
++ return BOOT_MEM_ROM_DATA;
++ default:
++ return BOOT_MEM_RESERVED;
++ }
++}
++
++void __init prom_meminit(void)
++{
++ struct prom_pmemblock *p;
++
++ p = prom_getmdesc();
++
++ while (p->size) {
++ long type;
++ unsigned long base, size;
++
++ type = prom_memtype_classify (p->type);
++ base = p->base;
++ size = p->size;
++
++ add_memory_region(base, size, type);
++ p++;
++ }
++}
++
++void __init prom_free_prom_memory (void)
++{
++ int i;
++ unsigned long freed = 0;
++ unsigned long addr;
++
++ for (i = 0; i < boot_mem_map.nr_map; i++) {
++ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
++ continue;
++
++ addr = boot_mem_map.map[i].addr;
++ while (addr < boot_mem_map.map[i].addr
++ + boot_mem_map.map[i].size) {
++ ClearPageReserved(virt_to_page(__va(addr)));
++ set_page_count(virt_to_page(__va(addr)), 1);
++ free_page((unsigned long)__va(addr));
++ addr += PAGE_SIZE;
++ freed += PAGE_SIZE;
++ }
++ }
++ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
++}
+diff -urN linux-2.4.30/arch/mips/ar7/mipsIRQ.S linux-2.4.30.current/arch/mips/ar7/mipsIRQ.S
+--- linux-2.4.30/arch/mips/ar7/mipsIRQ.S 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/mipsIRQ.S 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,120 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Interrupt exception dispatch code.
++ *
++ */
++#include <linux/config.h>
++
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
++
++/* A lot of complication here is taken away because:
++ *
++ * 1) We handle one interrupt and return, sitting in a loop and moving across
++ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
++ * common case is one pending IRQ so optimize in that direction.
++ *
++ * 2) We need not check against bits in the status register IRQ mask, that
++ * would make this routine slow as hell.
++ *
++ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
++ * between like BSD spl() brain-damage.
++ *
++ * Furthermore, the IRQs on the MIPS board look basically (barring software
++ * IRQs which we don't use at all and all external interrupt sources are
++ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
++ *
++ * MIPS IRQ Source
++ * -------- ------
++ * 0 Software (ignored)
++ * 1 Software (ignored)
++ * 2 Combined hardware interrupt (hw0)
++ * 3 Hardware (ignored)
++ * 4 Hardware (ignored)
++ * 5 Hardware (ignored)
++ * 6 Hardware (ignored)
++ * 7 R4k timer (what we use)
++ *
++ * Note: On the SEAD board thing are a little bit different.
++ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
++ * wired to UART1.
++ *
++ * We handle the IRQ according to _our_ priority which is:
++ *
++ * Highest ---- R4k Timer
++ * Lowest ---- Combined hardware interrupt
++ *
++ * then we just return, if multiple IRQs are pending then we will just take
++ * another exception, big deal.
++ */
++
++.text
++.set noreorder
++.set noat
++ .align 5
++NESTED(mipsIRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set at
++
++ mfc0 s0, CP0_CAUSE # get irq bits
++
++ /* First we check for r4k counter/timer IRQ. */
++ andi a0, s0, CAUSEF_IP7
++ beq a0, zero, 1f
++ andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
++
++ /* Wheee, a timer interrupt. */
++ move a0, sp
++ jal ar7_timer_interrupt
++ nop
++
++ j ret_from_irq
++ nop
++
++ 1:
++ beq a0, zero, 1f # delay slot, check hw3 interrupt
++ nop
++
++ /* Wheee, combined hardware level zero interrupt. */
++ jal avalanche_hw0_irqdispatch
++ move a0, sp # delay slot
++
++ j ret_from_irq
++ nop # delay slot
++
++ 1:
++ /*
++ * Here by mistake? This is possible, what can happen is that by the
++ * time we take the exception the IRQ pin goes low, so just leave if
++ * this is the case.
++ */
++ move a1,s0
++ PRINT("Got interrupt: c0_cause = %08x\n")
++ mfc0 a1, CP0_EPC
++ PRINT("c0_epc = %08x\n")
++
++ j ret_from_irq
++ nop
++END(mipsIRQ)
+diff -urN linux-2.4.30/arch/mips/ar7/printf.c linux-2.4.30.current/arch/mips/ar7/printf.c
+--- linux-2.4.30/arch/mips/ar7/printf.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/printf.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,51 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Putting things on the screen/serial line using Adam2 facilities.
++ */
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/serial_reg.h>
++#include <linux/spinlock.h>
++#include <asm/io.h>
++#include <asm/serial.h>
++#include <asm/addrspace.h>
++#include <asm/ar7/ar7.h>
++
++static char ppbuf[1024];
++
++void (*prom_print_str)(unsigned int out, char *s, int len);
++
++void prom_printf(char *fmt, ...) __init;
++void prom_printf(char *fmt, ...)
++{
++ va_list args;
++ int len;
++ prom_print_str = (void *)*(unsigned int *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR;
++
++ va_start(args, fmt);
++ vsprintf(ppbuf, fmt, args);
++ len = strlen(ppbuf);
++
++ prom_print_str(1, ppbuf, len);
++
++ va_end(args);
++ return;
++
++}
+diff -urN linux-2.4.30/arch/mips/ar7/reset.c linux-2.4.30.current/arch/mips/ar7/reset.c
+--- linux-2.4.30/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/reset.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,54 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Reset the MIPS boards.
++ *
++ */
++#include <linux/config.h>
++
++#include <asm/reboot.h>
++#include <asm/mips-boards/generic.h>
++
++static void ar7_machine_restart(char *command);
++static void ar7_machine_halt(void);
++static void ar7_machine_power_off(void);
++
++static void ar7_machine_restart(char *command)
++{
++
++}
++
++static void ar7_machine_halt(void)
++{
++
++}
++
++static void ar7_machine_power_off(void)
++{
++
++}
++
++void ar7_reboot_setup(void)
++{
++ _machine_restart = ar7_machine_restart;
++ _machine_halt = ar7_machine_halt;
++ _machine_power_off = ar7_machine_power_off;
++}
+diff -urN linux-2.4.30/arch/mips/ar7/setup.c linux-2.4.30.current/arch/mips/ar7/setup.c
+--- linux-2.4.30/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/setup.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,150 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/mc146818rtc.h>
++#include <linux/ioport.h>
++
++#include <asm/cpu.h>
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++#include <asm/mips-boards/generic.h>
++#include <asm/mips-boards/prom.h>
++
++#include <asm/dma.h>
++#include <asm/time.h>
++#include <asm/traps.h>
++
++
++#define _LINK_KSEG0_
++#define LITTLE_ENDIAN
++#include <asm/ar7/tnetd73xx.h>
++#include <asm/ar7/tnetd73xx_misc.h>
++
++// Specific for ar7wrd
++unsigned int tnetd73xx_vbus_freq;
++#define BOOTCR_MIPS_ASYNC_MODE (1 << 25)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
++
++#if defined(CONFIG_AR7_MARVELL)
++#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000
++#else
++#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2
++#endif
++
++
++#ifdef CONFIG_KGDB
++extern void rs_kgdb_hook(int);
++int remote_debug = 0;
++#endif
++
++extern struct rtc_ops no_rtc_ops;
++
++extern void ar7_reboot_setup(void);
++
++extern void ar7_time_init(void);
++extern void ar7_timer_setup(struct irqaction *irq);
++
++/* maybe some of this is not needed? */
++static void ar7_platform_init(void)
++{
++ //tnetd73xx_gpio_init();
++
++ tnetd73xx_reset_ctrl(RESET_MODULE_UART0, OUT_OF_RESET);
++ //tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET);
++ //REG32_WRITE(TNETD73XX_GPIOENR, 0xf3fc3ff0);
++
++ //tnetd73xx_reset_ctrl(RESET_MODULE_EPHY, IN_RESET);
++ //tnetd73xx_reset_ctrl(RESET_MODULE_EPHY, OUT_OF_RESET);
++
++ tnetd73xx_clkc_init(AFECLK_FREQ, REFCLK_FREQ, OSC3_FREQ);
++
++ tnetd73xx_vbus_freq = tnetd73xx_clkc_get_freq(CLKC_SYS) / 2;
++
++#if defined(CONFIG_AR7WRD)
++ if(! (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE)) {
++ tnetd73xx_clkc_set_freq(CLKC_MIPS, CLK_MHZ(150));
++ }
++#endif
++
++}
++
++const char *get_system_type(void)
++{
++ return "Texas Instruments AR7";
++}
++
++void __init ar7_setup(void)
++{
++#ifdef CONFIG_KGDB
++ int rs_putDebugChar(char);
++ char rs_getDebugChar(void);
++ extern int (*generic_putDebugChar)(char);
++ extern char (*generic_getDebugChar)(void);
++#endif
++ char *argptr;
++
++#ifdef CONFIG_SERIAL_CONSOLE
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "console=")) == NULL) {
++ argptr = prom_getcmdline();
++ strcat(argptr, " console=ttyS0,38400");
++ }
++#endif
++
++#ifdef CONFIG_KGDB
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
++ int line;
++ argptr += strlen("kgdb=ttyS");
++ if (*argptr != '0' && *argptr != '1')
++ printk("KGDB: Uknown serial line /dev/ttyS%c, "
++ "falling back to /dev/ttyS1\n", *argptr);
++ line = *argptr == '0' ? 0 : 1;
++ printk("KGDB: Using serial line /dev/ttyS%d for session\n",
++ line ? 1 : 0);
++
++ rs_kgdb_hook(line);
++ generic_putDebugChar = rs_putDebugChar;
++ generic_getDebugChar = rs_getDebugChar;
++
++ prom_printf("KGDB: Using serial line /dev/ttyS%d for session, "
++ "please connect your debugger\n", line ? 1 : 0);
++
++ remote_debug = 1;
++ /* Breakpoints are in init_IRQ() */
++ }
++#endif
++
++ argptr = prom_getcmdline();
++ if ((argptr = strstr(argptr, "nofpu")) != NULL)
++ cpu_data[0].options &= ~MIPS_CPU_FPU;
++
++ rtc_ops = &no_rtc_ops;
++
++ ar7_platform_init();
++
++ ar7_reboot_setup();
++
++ board_time_init = ar7_time_init;
++ board_timer_setup = ar7_timer_setup;
++}
+diff -urN linux-2.4.30/arch/mips/ar7/time.c linux-2.4.30.current/arch/mips/ar7/time.c
+--- linux-2.4.30/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/time.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,125 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Setting up the clock on the MIPS boards.
++ *
++ */
++
++#include <linux/types.h>
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel_stat.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++
++#include <asm/mipsregs.h>
++#include <asm/ptrace.h>
++#include <asm/hardirq.h>
++#include <asm/div64.h>
++
++#include <linux/interrupt.h>
++#include <linux/mc146818rtc.h>
++#include <linux/timex.h>
++
++#include <asm/mips-boards/generic.h>
++#include <asm/mips-boards/prom.h>
++#include <asm/ar7/ar7.h>
++
++extern asmlinkage void mipsIRQ(void);
++
++static unsigned long r4k_offset; /* Amount to increment compare reg each time */
++static unsigned long r4k_cur; /* What counter should be at next timer irq */
++
++#define MIPS_CPU_TIMER_IRQ 7
++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
++
++static inline void ack_r4ktimer(unsigned long newval)
++{
++ write_c0_compare(newval);
++}
++
++void ar7_timer_interrupt(struct pt_regs *regs)
++{
++ int cpu = smp_processor_id();
++
++ irq_enter(cpu, MIPS_CPU_TIMER_IRQ);
++
++ if (r4k_offset == 0)
++ goto null;
++
++ do {
++ kstat.irqs[cpu][MIPS_CPU_TIMER_IRQ]++;
++ do_timer(regs);
++ r4k_cur += r4k_offset;
++ ack_r4ktimer(r4k_cur);
++
++ } while (((unsigned long)read_c0_count()
++ - r4k_cur) < 0x7fffffff);
++
++ irq_exit(cpu, MIPS_CPU_TIMER_IRQ);
++
++ if (softirq_pending(cpu))
++ do_softirq();
++
++ return;
++
++null:
++ ack_r4ktimer(0);
++}
++
++/*
++ * Figure out the r4k offset, the amount to increment the compare
++ * register for each time tick.
++ */
++static unsigned long __init cal_r4koff(void)
++{
++ return ((CONFIG_AR7_FREQUENCY*500000)/HZ);
++}
++
++void __init ar7_time_init(void)
++{
++ unsigned long flags;
++ unsigned int est_freq;
++
++ set_except_vector(0, mipsIRQ);
++ write_c0_count(0);
++
++ printk("calculating r4koff... ");
++ r4k_offset = cal_r4koff();
++ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
++
++ est_freq = 2*r4k_offset*HZ;
++ est_freq += 5000; /* round */
++ est_freq -= est_freq%10000;
++ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
++ (est_freq%1000000)*100/1000000);
++}
++
++void __init ar7_timer_setup(struct irqaction *irq)
++{
++ /* we are using the cpu counter for timer interrupts */
++ irq->handler = no_action; /* we use our own handler */
++ setup_irq(MIPS_CPU_TIMER_IRQ, irq);
++
++ r4k_cur = (read_c0_count() + r4k_offset);
++ write_c0_compare(r4k_cur);
++ set_c0_status(ALLINTS);
++}
+diff -urN linux-2.4.30/arch/mips/ar7/tnetd73xx_misc.c linux-2.4.30.current/arch/mips/ar7/tnetd73xx_misc.c
+--- linux-2.4.30/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/arch/mips/ar7/tnetd73xx_misc.c 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,924 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Misc modules API Source
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_misc.c
++ *
++ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO
++ * FSER Modules API
++ * As per TNETD73xx specifications
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - Sharath Kumar PSP TII
++ * 14 Feb 03 - Anant Gole PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#define LITTLE_ENDIAN
++#define _LINK_KSEG0_
++
++#include <linux/types.h>
++#include <asm/ar7/tnetd73xx.h>
++#include <asm/ar7/tnetd73xx_misc.h>
++
++/* TNETD73XX Revision */
++u32 tnetd73xx_get_revision(void)
++{
++ /* Read Chip revision register - This register is from GPIO module */
++ return ( (u32) REG32_DATA(TNETD73XX_CVR));
++}
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++
++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, TNETD73XX_RESET_CTRL_T reset_ctrl)
++{
++ u32 reset_status;
++
++ /* read current reset register */
++ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
++
++ if (reset_ctrl == OUT_OF_RESET)
++ {
++ /* bring module out of reset */
++ reset_status |= (1 << reset_module);
++ }
++ else
++ {
++ /* put module in reset */
++ reset_status &= (~(1 << reset_module));
++ }
++
++ /* write to the reset register */
++ REG32_WRITE(TNETD73XX_RST_CTRL_PRCR, reset_status);
++}
++
++
++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status (TNETD73XX_RESET_MODULE_T reset_module)
++{
++ u32 reset_status;
++
++ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status);
++ return ( (reset_status & (1 << reset_module)) ? OUT_OF_RESET : IN_RESET );
++}
++
++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode)
++{
++ REG32_WRITE(TNETD73XX_RST_CTRL_SWRCR, mode);
++}
++
++#define TNETD73XX_RST_CTRL_RSR_MASK 0x3
++
++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status()
++{
++ u32 sys_reset_status;
++
++ REG32_READ(TNETD73XX_RST_CTRL_RSR, sys_reset_status);
++
++ return ( (TNETD73XX_SYS_RESET_STATUS_T) (sys_reset_status & TNETD73XX_RST_CTRL_RSR_MASK) );
++}
++
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++#define TNETD73XX_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */
++#define TNETD73XX_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */
++
++
++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl)
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ if (power_ctrl == POWER_CTRL_POWER_DOWN)
++ {
++ /* power down the module */
++ power_status |= (1 << power_module);
++ }
++ else
++ {
++ /* power on the module */
++ power_status &= (~(1 << power_module));
++ }
++
++ /* write to the reset register */
++ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
++}
++
++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module)
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ return ( (power_status & (1 << power_module)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP );
++}
++
++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode)
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ power_status &= TNETD73XX_GLOBAL_POWER_DOWN_MASK;
++ power_status |= ( power_mode << TNETD73XX_GLOBAL_POWER_DOWN_BIT);
++
++ /* write to power down control register */
++ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status);
++}
++
++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode()
++{
++ u32 power_status;
++
++ /* read current power down control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status);
++
++ power_status &= (~TNETD73XX_GLOBAL_POWER_DOWN_MASK);
++ power_status = ( power_status >> TNETD73XX_GLOBAL_POWER_DOWN_BIT);
++
++ return ( (TNETD73XX_SYS_POWER_MODE_T) power_status );
++}
++
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++#define TNETD73XX_WAKEUP_POLARITY_BIT 16
++
++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
++ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
++ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity)
++{
++ u32 wakeup_status;
++
++ /* read the wakeup control register */
++ REG32_READ(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
++
++ /* enable/disable */
++ if (wakeup_ctrl == WAKEUP_ENABLED)
++ {
++ /* enable wakeup */
++ wakeup_status |= wakeup_int;
++ }
++ else
++ {
++ /* disable wakeup */
++ wakeup_status &= (~wakeup_int);
++ }
++
++ /* set polarity */
++ if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
++ {
++ wakeup_status |= (wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
++ }
++ else
++ {
++ wakeup_status &= ~(wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT);
++ }
++
++ /* write the wakeup control register */
++ REG32_WRITE(TNETD73XX_POWER_CTRL_WKCR, wakeup_status);
++}
++
++
++/*****************************************************************************
++ * FSER Control
++ *****************************************************************************/
++
++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode)
++{
++ REG32_WRITE(TNETD73XX_FSER_BASE, fser_mode);
++}
++
++/*****************************************************************************
++ * Clock Control
++ *****************************************************************************/
++
++#define MIN(x,y) ( ((x) < (y)) ? (x) : (y) )
++#define MAX(x,y) ( ((x) > (y)) ? (x) : (y) )
++#define ABS(x) ( ((signed)(x) > 0) ? (x) : (-(x)) )
++#define CEIL(x,y) ( ((x) + (y) / 2) / (y) )
++
++#define CLKC_CLKCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x20 + (0x20 * (x)))
++#define CLKC_CLKPLLCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x30 + (0x20 * (x)))
++
++#define CLKC_PRE_DIVIDER 0x0000001F
++#define CLKC_POST_DIVIDER 0x001F0000
++
++#define CLKC_PLL_STATUS 0x1
++#define CLKC_PLL_FACTOR 0x0000F000
++
++#define BOOTCR_PLL_BYPASS (1 << 5)
++#define BOOTCR_MIPS_ASYNC_MODE (1 << 25)
++
++#define MIPS_PLL_SELECT 0x00030000
++#define SYSTEM_PLL_SELECT 0x0000C000
++#define USB_PLL_SELECT 0x000C0000
++#define ADSLSS_PLL_SELECT 0x00C00000
++
++#define MIPS_AFECLKI_SELECT 0x00000000
++#define MIPS_REFCLKI_SELECT 0x00010000
++#define MIPS_XTAL3IN_SELECT 0x00020000
++
++#define SYSTEM_AFECLKI_SELECT 0x00000000
++#define SYSTEM_REFCLKI_SELECT 0x00004000
++#define SYSTEM_XTAL3IN_SELECT 0x00008000
++#define SYSTEM_MIPSPLL_SELECT 0x0000C000
++
++#define USB_SYSPLL_SELECT 0x00000000
++#define USB_REFCLKI_SELECT 0x00040000
++#define USB_XTAL3IN_SELECT 0x00080000
++#define USB_MIPSPLL_SELECT 0x000C0000
++
++#define ADSLSS_AFECLKI_SELECT 0x00000000
++#define ADSLSS_REFCLKI_SELECT 0x00400000
++#define ADSLSS_XTAL3IN_SELECT 0x00800000
++#define ADSLSS_MIPSPLL_SELECT 0x00C00000
++
++#define SYS_MAX CLK_MHZ(150)
++#define SYS_MIN CLK_MHZ(1)
++
++#define MIPS_SYNC_MAX SYS_MAX
++#define MIPS_ASYNC_MAX CLK_MHZ(160)
++#define MIPS_MIN CLK_MHZ(1)
++
++#define USB_MAX CLK_MHZ(100)
++#define USB_MIN CLK_MHZ(1)
++
++#define ADSL_MAX CLK_MHZ(180)
++#define ADSL_MIN CLK_MHZ(1)
++
++#define PLL_MUL_MAXFACTOR 15
++#define MAX_DIV_VALUE 32
++#define MIN_DIV_VALUE 1
++
++#define MIN_PLL_INP_FREQ CLK_MHZ(8)
++#define MAX_PLL_INP_FREQ CLK_MHZ(100)
++
++#define DIVIDER_LOCK_TIME 10100
++#define PLL_LOCK_TIME 10100 * 75
++
++
++
++ /****************************************************************************
++ * DATA PURPOSE: PRIVATE Variables
++ **************************************************************************/
++ static u32 *clk_src[4];
++ static u32 mips_pll_out;
++ static u32 sys_pll_out;
++ static u32 afeclk_inp;
++ static u32 refclk_inp;
++ static u32 xtal_inp;
++ static u32 present_min;
++ static u32 present_max;
++
++ /* Forward References */
++ static u32 find_gcd(u32 min, u32 max);
++ static u32 compute_prediv( u32 divider, u32 min, u32 max);
++ static void get_val(u32 base_freq, u32 output_freq,u32 *multiplier, u32 *divider);
++ static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id);
++ static void find_approx(u32 *,u32 *,u32);
++
++ /****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_init
++ ****************************************************************************
++ * Description: The routine initializes the internal variables depending on
++ * on the sources selected for different clocks.
++ ***************************************************************************/
++void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in)
++{
++
++ u32 choice;
++
++ afeclk_inp = afeclk;
++ refclk_inp = refclk;
++ xtal_inp = xtal3in;
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & MIPS_PLL_SELECT;
++ switch(choice)
++ {
++ case MIPS_AFECLKI_SELECT:
++ clk_src[CLKC_MIPS] = &afeclk_inp;
++ break;
++
++ case MIPS_REFCLKI_SELECT:
++ clk_src[CLKC_MIPS] = &refclk_inp;
++ break;
++
++ case MIPS_XTAL3IN_SELECT:
++ clk_src[CLKC_MIPS] = &xtal_inp;
++ break;
++
++ default :
++ clk_src[CLKC_MIPS] = 0;
++
++ }
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & SYSTEM_PLL_SELECT;
++ switch(choice)
++ {
++ case SYSTEM_AFECLKI_SELECT:
++ clk_src[CLKC_SYS] = &afeclk_inp;
++ break;
++
++ case SYSTEM_REFCLKI_SELECT:
++ clk_src[CLKC_SYS] = &refclk_inp;
++ break;
++
++ case SYSTEM_XTAL3IN_SELECT:
++ clk_src[CLKC_SYS] = &xtal_inp;
++ break;
++
++ case SYSTEM_MIPSPLL_SELECT:
++ clk_src[CLKC_SYS] = &mips_pll_out;
++ break;
++
++ default :
++ clk_src[CLKC_SYS] = 0;
++
++ }
++
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & ADSLSS_PLL_SELECT;
++ switch(choice)
++ {
++ case ADSLSS_AFECLKI_SELECT:
++ clk_src[CLKC_ADSLSS] = &afeclk_inp;
++ break;
++
++ case ADSLSS_REFCLKI_SELECT:
++ clk_src[CLKC_ADSLSS] = &refclk_inp;
++ break;
++
++ case ADSLSS_XTAL3IN_SELECT:
++ clk_src[CLKC_ADSLSS] = &xtal_inp;
++ break;
++
++ case ADSLSS_MIPSPLL_SELECT:
++ clk_src[CLKC_ADSLSS] = &mips_pll_out;
++ break;
++
++ default :
++ clk_src[CLKC_ADSLSS] = 0;
++
++ }
++
++
++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & USB_PLL_SELECT;
++ switch(choice)
++ {
++ case USB_SYSPLL_SELECT:
++ clk_src[CLKC_USB] = &sys_pll_out ;
++ break;
++
++ case USB_REFCLKI_SELECT:
++ clk_src[CLKC_USB] = &refclk_inp;
++ break;
++
++ case USB_XTAL3IN_SELECT:
++ clk_src[CLKC_USB] = &xtal_inp;
++ break;
++
++ case USB_MIPSPLL_SELECT:
++ clk_src[CLKC_USB] = &mips_pll_out;
++ break;
++
++ default :
++ clk_src[CLKC_USB] = 0;
++
++ }
++}
++
++
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_set_freq
++ ****************************************************************************
++ * Description: The above routine is called to set the output_frequency of the
++ * selected clock(using clk_id) to the required value given
++ * by the variable output_freq.
++ ***************************************************************************/
++TNETD73XX_ERR tnetd73xx_clkc_set_freq
++(
++ TNETD73XX_CLKC_ID_T clk_id,
++ u32 output_freq
++ )
++{
++ u32 base_freq;
++ u32 multiplier;
++ u32 divider;
++ u32 min_prediv;
++ u32 max_prediv;
++ u32 prediv;
++ u32 postdiv;
++ u32 temp;
++
++ /* check if PLLs are bypassed*/
++ if(REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ /*check if the requested output_frequency is in valid range*/
++ switch( clk_id )
++ {
++ case CLKC_SYS:
++ if( output_freq < SYS_MIN || output_freq > SYS_MAX)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = SYS_MIN;
++ present_max = SYS_MAX;
++ break;
++
++ case CLKC_MIPS:
++ if((output_freq < MIPS_MIN) ||
++ (output_freq > ((REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX)))
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = MIPS_MIN;
++ present_max = (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX;
++ break;
++
++ case CLKC_USB:
++ if( output_freq < USB_MIN || output_freq > USB_MAX)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = USB_MIN;
++ present_max = USB_MAX;
++ break;
++
++ case CLKC_ADSLSS:
++ if( output_freq < ADSL_MIN || output_freq > ADSL_MAX)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++ present_min = ADSL_MIN;
++ present_max = ADSL_MAX;
++ break;
++ }
++
++
++ base_freq = get_base_frequency(clk_id);
++
++
++ /* check for minimum base frequency value */
++ if( base_freq < MIN_PLL_INP_FREQ)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ get_val(output_freq, base_freq, &multiplier, &divider);
++
++ /* check multiplier range */
++ if( (multiplier > PLL_MUL_MAXFACTOR) || (multiplier <= 0) )
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ /* check divider value */
++ if( divider == 0 )
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++ /*compute minimum and maximum predivider values */
++ min_prediv = MAX(base_freq / MAX_PLL_INP_FREQ + 1, divider / MAX_DIV_VALUE + 1);
++ max_prediv = MIN(base_freq / MIN_PLL_INP_FREQ, MAX_DIV_VALUE);
++
++ /*adjust the value of divider so that it not less than minimum predivider value*/
++ if (divider < min_prediv)
++ {
++ temp = CEIL(min_prediv, divider);
++ if ((temp * multiplier) > PLL_MUL_MAXFACTOR)
++ {
++ return TNETD73XX_ERR_ERROR ;
++ }
++ else
++ {
++ multiplier = temp * multiplier;
++ divider = min_prediv;
++ }
++
++ }
++
++ /* compute predivider and postdivider values */
++ prediv = compute_prediv (divider, min_prediv, max_prediv);
++ postdiv = CEIL(divider,prediv);
++
++ /*return fail if postdivider value falls out of range */
++ if(postdiv > MAX_DIV_VALUE)
++ {
++ return TNETD73XX_ERR_ERROR;
++ }
++
++
++ /*write predivider and postdivider values*/
++ /* pre-Divider and post-divider are 5 bit N+1 dividers */
++ REG32_WRITE(CLKC_CLKCR(clk_id), ((postdiv -1) & 0x1F) << 16 | ((prediv -1) & 0x1F) );
++
++ /*wait for divider output to stabilise*/
++ for(temp =0; temp < DIVIDER_LOCK_TIME; temp++);
++
++ /*write to PLL clock register*/
++
++ if(clk_id == CLKC_SYS)
++ {
++ /* but before writing put DRAM to hold mode */
++ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) |= 0x80000000;
++ }
++ /*Bring PLL into div mode */
++ REG32_WRITE(CLKC_CLKPLLCR(clk_id), 0x4);
++
++ /*compute the word to be written to PLLCR
++ *corresponding to multiplier value
++ */
++ multiplier = (((multiplier - 1) & 0xf) << 12)| ((255 <<3) | 0x0e);
++
++ /* wait till PLL enters div mode */
++ while(REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
++ /*nothing*/;
++
++ REG32_WRITE(CLKC_CLKPLLCR(clk_id), multiplier);
++
++ while(!REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS)
++ /*nothing*/;
++
++
++ /*wait for External pll to lock*/
++ for(temp =0; temp < PLL_LOCK_TIME; temp++);
++
++ if(clk_id == CLKC_SYS)
++ {
++ /* Bring DRAM out of hold */
++ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) &= ~0x80000000;
++ }
++
++ return TNETD73XX_ERR_OK ;
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_clkc_get_freq
++ ****************************************************************************
++ * Description: The above routine is called to get the output_frequency of the
++ * selected clock( clk_id)
++ ***************************************************************************/
++u32 tnetd73xx_clkc_get_freq
++(
++ TNETD73XX_CLKC_ID_T clk_id
++ )
++{
++
++ u32 clk_ctrl_register;
++ u32 clk_pll_setting;
++ u32 clk_predivider;
++ u32 clk_postdivider;
++ u16 pll_factor;
++ u32 base_freq;
++ u32 divider;
++
++ base_freq = get_base_frequency(clk_id);
++
++ clk_ctrl_register = REG32_DATA(CLKC_CLKCR(clk_id));
++
++ /* pre-Divider and post-divider are 5 bit N+1 dividers */
++ clk_predivider = (CLKC_PRE_DIVIDER & clk_ctrl_register) + 1;
++ clk_postdivider = ((CLKC_POST_DIVIDER & clk_ctrl_register) >> 16) + 1;
++
++ divider = clk_predivider * clk_postdivider;
++
++
++ if( (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS))
++ {
++ return (CEIL(base_freq, divider)); /* PLLs bypassed.*/
++ }
++
++
++ else
++ {
++ /* return the current clock speed based upon the PLL setting */
++ clk_pll_setting = REG32_DATA(CLKC_CLKPLLCR(clk_id));
++
++ /* Get the PLL multiplication factor */
++ pll_factor = ((clk_pll_setting & CLKC_PLL_FACTOR) >> 12) + 1;
++
++ /* Check if we're in divide mode or multiply mode */
++ if((clk_pll_setting & 0x1) == 0)
++ {
++ /* We're in divide mode */
++ if(pll_factor < 0x10)
++ return (CEIL(base_freq >> 1, divider));
++ else
++ return (CEIL(base_freq >> 2, divider));
++ }
++
++ else /* We're in PLL mode */
++ {
++ /* See if PLLNDIV & PLLDIV are set */
++ if((clk_pll_setting & 0x0800) && (clk_pll_setting & 0x2))
++ {
++ if(clk_pll_setting & 0x1000)
++ {
++ /* clk = base_freq * k/2 */
++ return(CEIL((base_freq * pll_factor) >> 1, divider));
++ }
++ else
++ {
++ /* clk = base_freq * (k-1) / 4)*/
++ return(CEIL((base_freq * (pll_factor - 1)) >>2, divider));
++ }
++ }
++ else
++ {
++ if(pll_factor < 0x10)
++ {
++ /* clk = base_freq * k */
++ return(CEIL(base_freq * pll_factor, divider));
++ }
++
++ else
++ {
++ /* clk = base_freq */
++ return(CEIL(base_freq, divider));
++ }
++ }
++ }
++ return(0); /* Should never reach here */
++
++ }
++
++}
++
++
++/* local helper functions */
++
++/****************************************************************************
++ * FUNCTION: get_base_frequency
++ ****************************************************************************
++ * Description: The above routine is called to get base frequency of the clocks.
++ ***************************************************************************/
++
++static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id)
++{
++ /* update the current MIPs PLL output value, if the required
++ * source is MIPS PLL
++ */
++ if ( clk_src[clk_id] == &mips_pll_out)
++ {
++ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_MIPS);
++ }
++
++
++ /* update the current System PLL output value, if the required
++ * source is system PLL
++ */
++ if ( clk_src[clk_id] == &sys_pll_out)
++ {
++ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_SYS);
++ }
++
++ return (*clk_src[clk_id]);
++
++}
++
++
++
++/****************************************************************************
++ * FUNCTION: find_gcd
++ ****************************************************************************
++ * Description: The above routine is called to find gcd of 2 numbers.
++ ***************************************************************************/
++static u32 find_gcd
++(
++ u32 min,
++ u32 max
++ )
++{
++ if (max % min == 0)
++ {
++ return min;
++ }
++ else
++ {
++ return find_gcd(max % min, min);
++ }
++}
++
++/****************************************************************************
++ * FUNCTION: compute_prediv
++ ****************************************************************************
++ * Description: The above routine is called to compute predivider value
++ ***************************************************************************/
++static u32 compute_prediv(u32 divider, u32 min, u32 max)
++{
++ u16 prediv;
++
++ /* return the divider itself it it falls within the range of predivider*/
++ if (min <= divider && divider <= max)
++ {
++ return divider;
++ }
++
++ /* find a value for prediv such that it is a factor of divider */
++ for (prediv = max; prediv >= min ; prediv--)
++ {
++ if ( (divider % prediv) == 0 )
++ {
++ return prediv;
++ }
++ }
++
++ /* No such factor exists, return min as prediv */
++ return min;
++}
++
++/****************************************************************************
++ * FUNCTION: get_val
++ ****************************************************************************
++ * Description: This routine is called to get values of divider and multiplier.
++ ***************************************************************************/
++
++static void get_val(u32 output_freq, u32 base_freq,u32 *multiplier, u32 *divider)
++{
++ u32 temp_mul;
++ u32 temp_div;
++ u32 gcd;
++ u32 min_freq;
++ u32 max_freq;
++
++ /* find gcd of base_freq, output_freq */
++ min_freq = (base_freq < output_freq) ? base_freq : output_freq;
++ max_freq = (base_freq > output_freq) ? base_freq : output_freq;
++ gcd = find_gcd(min_freq , max_freq);
++
++ if(gcd == 0)
++ return; /* ERROR */
++
++ /* compute values of multiplier and divider */
++ temp_mul = output_freq / gcd;
++ temp_div = base_freq / gcd;
++
++
++ /* set multiplier such that 1 <= multiplier <= PLL_MUL_MAXFACTOR */
++ if( temp_mul > PLL_MUL_MAXFACTOR )
++ {
++ if((temp_mul / temp_div) > PLL_MUL_MAXFACTOR)
++ return;
++
++ find_approx(&temp_mul,&temp_div,base_freq);
++ }
++
++ *multiplier = temp_mul;
++ *divider = temp_div;
++}
++
++/****************************************************************************
++ * FUNCTION: find_approx
++ ****************************************************************************
++ * Description: This function gets the approx value of num/denom.
++ ***************************************************************************/
++
++static void find_approx(u32 *num,u32 *denom,u32 base_freq)
++{
++ u32 num1;
++ u32 denom1;
++ u32 num2;
++ u32 denom2;
++ int32_t closest;
++ int32_t prev_closest;
++ u32 temp_num;
++ u32 temp_denom;
++ u32 normalize;
++ u32 gcd;
++ u32 output_freq;
++
++ num1 = *num;
++ denom1 = *denom;
++
++ prev_closest = 0x7fffffff; /* maximum possible value */
++ num2 = num1;
++ denom2 = denom1;
++
++ /* start with max */
++ for(temp_num = 15; temp_num >=1; temp_num--)
++ {
++
++ temp_denom = CEIL(temp_num * denom1, num1);
++ output_freq = (temp_num * base_freq) / temp_denom;
++
++ if(temp_denom < 1)
++ {
++ break;
++ }
++ else
++ {
++ normalize = CEIL(num1,temp_num);
++ closest = (ABS((num1 * (temp_denom) ) - (temp_num * denom1))) * normalize;
++ if(closest < prev_closest && output_freq > present_min && output_freq <present_max)
++ {
++ prev_closest = closest;
++ num2 = temp_num;
++ denom2 = temp_denom;
++ }
++
++ }
++
++ }
++
++ gcd = find_gcd(num2,denom2);
++ num2 = num2 / gcd;
++ denom2 = denom2 /gcd;
++
++ *num = num2;
++ *denom = denom2;
++}
++
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_init
++ ***************************************************************************/
++void tnetd73xx_gpio_init()
++{
++ /* Bring module out of reset */
++ tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET);
++ REG32_WRITE(TNETD73XX_GPIOENR, 0xFFFFFFFF);
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_ctrl
++ ***************************************************************************/
++void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin,
++ TNETD73XX_GPIO_PIN_MODE_T pin_mode,
++ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction)
++{
++ u32 pin_status;
++ REG32_READ(TNETD73XX_GPIOENR, pin_status);
++ if (pin_mode == GPIO_PIN)
++ {
++ pin_status |= (1 << gpio_pin);
++ REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
++
++ /* Set pin direction */
++ REG32_READ(TNETD73XX_GPIOPDIRR, pin_status);
++ if (pin_direction == GPIO_INPUT_PIN)
++ {
++ pin_status |= (1 << gpio_pin);
++ }
++ else /* GPIO_OUTPUT_PIN */
++ {
++ pin_status &= (~(1 << gpio_pin));
++ }
++ REG32_WRITE(TNETD73XX_GPIOPDIRR, pin_status);
++ }
++ else /* FUNCTIONAL PIN */
++ {
++ pin_status &= (~(1 << gpio_pin));
++ REG32_WRITE(TNETD73XX_GPIOENR, pin_status);
++ }
++
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_out
++ ***************************************************************************/
++void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value)
++{
++ u32 pin_value;
++
++ REG32_READ(TNETD73XX_GPIODOUTR, pin_value);
++ if (value == 1)
++ {
++ pin_value |= (1 << gpio_pin);
++ }
++ else
++ {
++ pin_value &= (~(1 << gpio_pin));
++ }
++ REG32_WRITE(TNETD73XX_GPIODOUTR, pin_value);
++}
++
++/****************************************************************************
++ * FUNCTION: tnetd73xx_gpio_in
++ ***************************************************************************/
++int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin)
++{
++ u32 pin_value;
++ REG32_READ(TNETD73XX_GPIODINR, pin_value);
++ return ( (pin_value & (1 << gpio_pin)) ? 1 : 0 );
++}
++
+diff -urN linux-2.4.30/arch/mips/config-shared.in linux-2.4.30.current/arch/mips/config-shared.in
+--- linux-2.4.30/arch/mips/config-shared.in 2005-06-11 20:24:09.000000000 +0200
++++ linux-2.4.30.current/arch/mips/config-shared.in 2005-06-12 20:14:28.000000000 +0200
+@@ -20,6 +20,15 @@
+ mainmenu_option next_comment
+ comment 'Machine selection'
+ dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
++dep_bool 'Support for Texas Instruments AR7 (EXPERIMENTAL)' CONFIG_AR7 $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
++if [ "$CONFIG_AR7" = "y" ]; then
++ choice 'Texas Instruments Reference Platform' \
++ "AR7DB CONFIG_AR7DB \
++ AR7RD CONFIG_AR7RD \
++ AR7WRD CONFIG_AR7WRD" AR7DB
++ int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_FREQUENCY 150
++ hex 'Texas Instruments AR7 SDRAM Start' CONFIG_AR7_MEMORY 0x14000000
++fi
+ dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
+ dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32
+@@ -239,6 +248,11 @@
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+ fi
++if [ "$CONFIG_AR7" = "y" ]; then
++ define_bool CONFIG_NONCOHERENT_IO y
++ define_bool CONFIG_SWAP_IO_SPACE y
++ define_bool CONFIG_AR7_PAGING y
++fi
+ if [ "$CONFIG_CASIO_E55" = "y" ]; then
+ define_bool CONFIG_IRQ_CPU y
+ define_bool CONFIG_NONCOHERENT_IO y
+@@ -736,6 +750,7 @@
+ mainmenu_option next_comment
+ comment 'General setup'
+ if [ "$CONFIG_ACER_PICA_61" = "y" -o \
++ "$CONFIG_AR7" = "y" -o \
+ "$CONFIG_CASIO_E55" = "y" -o \
+ "$CONFIG_DDB5074" = "y" -o \
+ "$CONFIG_DDB5476" = "y" -o \
+@@ -797,6 +812,7 @@
+ bool 'Networking support' CONFIG_NET
+
+ if [ "$CONFIG_ACER_PICA_61" = "y" -o \
++ "$CONFIG_AR7" = "y" -o \
+ "$CONFIG_CASIO_E55" = "y" -o \
+ "$CONFIG_DECSTATION" = "y" -o \
+ "$CONFIG_IBM_WORKPAD" = "y" -o \
+diff -urN linux-2.4.30/arch/mips/kernel/irq.c linux-2.4.30.current/arch/mips/kernel/irq.c
+--- linux-2.4.30/arch/mips/kernel/irq.c 2004-02-18 14:36:30.000000000 +0100
++++ linux-2.4.30.current/arch/mips/kernel/irq.c 2005-06-12 20:21:34.000000000 +0200
+@@ -76,6 +76,7 @@
+ * Generic, controller-independent functions:
+ */
+
++#ifndef CONFIG_AR7
+ int get_irq_list(char *buf)
+ {
+ int i, j;
+@@ -110,6 +111,7 @@
+ p += sprintf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+ return p - buf;
+ }
++#endif
+
+ #ifdef CONFIG_SMP
+ int global_irq_holder = NO_PROC_ID;
+@@ -525,6 +527,7 @@
+ *
+ */
+
++#ifndef CONFIG_AR7
+ int request_irq(unsigned int irq,
+ void (*handler)(int, void *, struct pt_regs *),
+ unsigned long irqflags,
+@@ -569,6 +572,7 @@
+ kfree(action);
+ return retval;
+ }
++#endif
+
+ /**
+ * free_irq - free an interrupt
+@@ -588,6 +592,7 @@
+ * the machine.
+ */
+
++#ifndef CONFIG_AR7
+ void free_irq(unsigned int irq, void *dev_id)
+ {
+ irq_desc_t *desc;
+@@ -629,6 +634,7 @@
+ return;
+ }
+ }
++#endif
+
+ /*
+ * IRQ autodetection code..
+diff -urN linux-2.4.30/arch/mips/kernel/setup.c linux-2.4.30.current/arch/mips/kernel/setup.c
+--- linux-2.4.30/arch/mips/kernel/setup.c 2005-06-11 20:24:07.000000000 +0200
++++ linux-2.4.30.current/arch/mips/kernel/setup.c 2005-06-12 20:14:28.000000000 +0200
+@@ -109,6 +109,7 @@
+ unsigned long isa_slot_offset;
+ EXPORT_SYMBOL(isa_slot_offset);
+
++extern void avalanche_bootmem_init(void);
+ extern void SetUpBootInfo(void);
+ extern void load_mmu(void);
+ extern asmlinkage void start_kernel(void);
+@@ -267,6 +268,9 @@
+ #endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Find the highest page frame number we have available. */
++#ifdef CONFIG_AR7_PAGING
++ avalanche_bootmem_init();
++#else
+ max_pfn = 0;
+ first_usable_pfn = -1UL;
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+@@ -376,7 +380,7 @@
+
+ /* Reserve the bootmap memory. */
+ reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
+-
++#endif
+ #ifdef CONFIG_BLK_DEV_INITRD
+ /* Board specific code should have set up initrd_start and initrd_end */
+ ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
+@@ -494,6 +498,7 @@
+ void hp_setup(void);
+ void au1x00_setup(void);
+ void frame_info_init(void);
++ void ar7_setup(void);
+
+ frame_info_init();
+ #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
+@@ -691,6 +696,11 @@
+ pmc_yosemite_setup();
+ break;
+ #endif
++#ifdef CONFIG_AR7
++ case MACH_GROUP_UNKNOWN:
++ ar7_setup();
++ break;
++#endif
+ default:
+ panic("Unsupported architecture");
+ }
+diff -urN linux-2.4.30/arch/mips/kernel/traps.c linux-2.4.30.current/arch/mips/kernel/traps.c
+--- linux-2.4.30/arch/mips/kernel/traps.c 2005-06-11 20:24:07.000000000 +0200
++++ linux-2.4.30.current/arch/mips/kernel/traps.c 2005-06-12 20:24:13.000000000 +0200
+@@ -40,6 +40,10 @@
+ #include <asm/uaccess.h>
+ #include <asm/mmu_context.h>
+
++#ifdef CONFIG_AR7
++#include <asm/ar7/ar7.h>
++#endif
++
+ extern asmlinkage void handle_mod(void);
+ extern asmlinkage void handle_tlbl(void);
+ extern asmlinkage void handle_tlbs(void);
+@@ -920,14 +924,37 @@
+ void __init trap_init(void)
+ {
+ extern char except_vec1_generic;
++ extern char except_vec2_generic;
+ extern char except_vec3_generic, except_vec3_r4000;
+ extern char except_vec_ejtag_debug;
+ extern char except_vec4;
+ unsigned long i;
+
++#ifdef CONFIG_AR7
++ extern char jump_tlb_miss, jump_tlb_miss_unused;
++ extern char jump_cache_error,jump_general_exception;
++ extern char jump_dedicated_interrupt;
++ clear_c0_status(ST0_BEV);
++#endif
++
+ /* Copy the generic exception handler code to it's final destination. */
+ memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
+
++#ifdef CONFIG_AR7
++ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
++ memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
++ flush_icache_range(KSEG0, KSEG0 + 0x200);
++
++ /* jump table to exception routines */
++
++ memcpy((void *)(KSEG0 + 0x0), &jump_tlb_miss, 0x80);
++ memcpy((void *)(KSEG0 + 0x80), &jump_tlb_miss_unused, 0x80);
++ memcpy((void *)(KSEG0 + 0x100), &jump_cache_error, 0x80);
++ memcpy((void *)(KSEG0 + 0x180), &jump_general_exception, 0x80);
++ memcpy((void *)(KSEG0 + 0x200), &jump_dedicated_interrupt, 0x80);
++ flush_icache_range(KSEG0 + 0x80, KSEG0 + 0x200);
++#endif
++
+ /*
+ * Setup default vectors
+ */
+diff -urN linux-2.4.30/arch/mips/lib/promlib.c linux-2.4.30.current/arch/mips/lib/promlib.c
+--- linux-2.4.30/arch/mips/lib/promlib.c 2003-08-25 13:44:40.000000000 +0200
++++ linux-2.4.30.current/arch/mips/lib/promlib.c 2005-06-12 20:14:28.000000000 +0200
+@@ -1,3 +1,4 @@
++#ifndef CONFIG_AR7
+ #include <stdarg.h>
+ #include <linux/kernel.h>
+
+@@ -22,3 +23,4 @@
+ }
+ va_end(args);
+ }
++#endif
+diff -urN linux-2.4.30/arch/mips/mm/init.c linux-2.4.30.current/arch/mips/mm/init.c
+--- linux-2.4.30/arch/mips/mm/init.c 2004-02-18 14:36:30.000000000 +0100
++++ linux-2.4.30.current/arch/mips/mm/init.c 2005-06-12 20:14:28.000000000 +0200
+@@ -40,8 +40,10 @@
+
+ mmu_gather_t mmu_gathers[NR_CPUS];
+ unsigned long highstart_pfn, highend_pfn;
++#ifndef CONFIG_AR7_PAGING
+ static unsigned long totalram_pages;
+ static unsigned long totalhigh_pages;
++#endif
+
+ void pgd_init(unsigned long page)
+ {
+@@ -235,6 +237,7 @@
+ #endif
+ }
+
++#ifndef CONFIG_AR7_PAGING
+ void __init paging_init(void)
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+@@ -272,6 +275,7 @@
+
+ free_area_init(zones_size);
+ }
++#endif
+
+ #define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
+ #define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+@@ -298,6 +302,7 @@
+ return 0;
+ }
+
++#ifndef CONFIG_AR7_PAGING
+ void __init mem_init(void)
+ {
+ unsigned long codesize, reservedpages, datasize, initsize;
+@@ -359,6 +364,7 @@
+ initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+ }
++#endif
+
+ #ifdef CONFIG_BLK_DEV_INITRD
+ void free_initrd_mem(unsigned long start, unsigned long end)
+@@ -376,6 +382,7 @@
+ }
+ #endif
+
++#ifndef CONFIG_AR7_PAGING
+ extern char __init_begin, __init_end;
+ extern void prom_free_prom_memory(void) __init;
+
+@@ -383,7 +390,9 @@
+ {
+ unsigned long addr;
+
++#ifndef CONFIG_AR7
+ prom_free_prom_memory ();
++#endif
+
+ addr = (unsigned long) &__init_begin;
+ while (addr < (unsigned long) &__init_end) {
+@@ -409,3 +418,4 @@
+
+ return;
+ }
++#endif
+diff -urN linux-2.4.30/arch/mips/mm/tlb-r4k.c linux-2.4.30.current/arch/mips/mm/tlb-r4k.c
+--- linux-2.4.30/arch/mips/mm/tlb-r4k.c 2005-06-11 20:24:07.000000000 +0200
++++ linux-2.4.30.current/arch/mips/mm/tlb-r4k.c 2005-06-12 20:14:28.000000000 +0200
+@@ -20,6 +20,10 @@
+ #include <asm/pgtable.h>
+ #include <asm/system.h>
+
++#ifdef CONFIG_AR7
++#include <asm/ar7/ar7.h>
++#endif
++
+ extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600;
+
+ /* CP0 hazard avoidance. */
+diff -urN linux-2.4.30/drivers/char/serial.c linux-2.4.30.current/drivers/char/serial.c
+--- linux-2.4.30/drivers/char/serial.c 2005-06-11 20:24:07.000000000 +0200
++++ linux-2.4.30.current/drivers/char/serial.c 2005-06-12 20:14:28.000000000 +0200
+@@ -419,7 +419,40 @@
+ return 0;
+ }
+
+-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
++#if defined(CONFIG_AR7)
++
++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
++{
++ return (inb(info->port + (offset * 4)) & 0xff);
++}
++
++
++static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ return (inb(info->port + (offset * 4)) & 0xff);
++#else
++ return (inb_p(info->port + (offset * 4)) & 0xff);
++#endif
++}
++
++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
++{
++ outb(value, info->port + (offset * 4));
++}
++
++
++static _INLINE_ void serial_outp(struct async_struct *info, int offset,
++ int value)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ outb(value, info->port + (offset * 4));
++#else
++ outb_p(value, info->port + (offset * 4));
++#endif
++}
++
++#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
+
+ #include <asm/mips-boards/atlas.h>
+
+@@ -478,8 +511,10 @@
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
++#ifdef CONFIG_AR7
+ #define serial_inp(info, offset) serial_in(info, offset)
+ #define serial_outp(info, offset, value) serial_out(info, offset, value)
++#endif
+
+
+ /*
+@@ -1728,7 +1763,15 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
++#ifdef CONFIG_AR7
++ quot = get_avalanche_vbus_freq() / baud;
++
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = baud_base / baud;
++#endif
+ }
+ /* If the quotient is zero refuse the change */
+ if (!quot && old_termios) {
+@@ -5552,8 +5595,10 @@
+ state->irq = irq_cannonicalize(state->irq);
+ if (state->hub6)
+ state->io_type = SERIAL_IO_HUB6;
++#ifdef CONFIG_AR7
+ if (state->port && check_region(state->port,8))
+ continue;
++#endif
+ #ifdef CONFIG_MCA
+ if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
+ continue;
+@@ -6009,7 +6054,15 @@
+ info->io_type = state->io_type;
+ info->iomem_base = state->iomem_base;
+ info->iomem_reg_shift = state->iomem_reg_shift;
++#ifdef CONFIG_AR7
++ quot = get_avalanche_vbus_freq() / baud;
++
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = state->baud_base / baud;
++#endif
+ cval = cflag & (CSIZE | CSTOPB);
+ #if defined(__powerpc__) || defined(__alpha__)
+ cval >>= 8;
+Binary files linux-2.4.30/include/asm-mips/.addrspace.h.swp and linux-2.4.30.current/include/asm-mips/.addrspace.h.swp differ
+diff -urN linux-2.4.30/include/asm-mips/ar7/ar7.h linux-2.4.30.current/include/asm-mips/ar7/ar7.h
+--- linux-2.4.30/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/ar7.h 2005-06-12 20:59:09.000000000 +0200
+@@ -0,0 +1,138 @@
++#ifndef _MIPS_AR7_H
++#define _MIPS_AR7_H
++
++#include <linux/config.h>
++#include <asm/addrspace.h>
++
++
++#ifndef LITTLE_ENDIAN
++#define LITTLE_ENDIAN
++#endif
++
++#ifndef _LINK_KSEG0_
++#define _LINK_KSEG0_
++#endif
++
++#include <asm/ar7/tnetd73xx.h>
++
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++
++#define MIPS_EXCEPTION_OFFSET 8
++#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
++
++/*
++ * AR7 board SDRAM base address. This is used to setup the
++ * bootmem tables
++ */
++
++#define AVALANCHE_SDRAM_BASE CONFIG_AR7_MEMORY//0x14000000UL
++#define AVALANCHE_INTC_BASE TNETD73XX_INTC_BASE
++
++
++/*
++ * AR7 board vectors
++ */
++
++#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
++#define AVALANCHE_VECS_KSEG0 (CPHYSADDR(AVALANCHE_SDRAM_BASE) | 0x80000000)
++#undef KSEG0
++#define KSEG0 AVALANCHE_VECS_KSEG0
++
++/*
++ * Yamon Prom print address.
++ */
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
++#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++
++/*
++ * AR7 Reset and PSU standby register.
++ */
++#define AVALANCHE_SOFTRES_REG (KSEG1ADDR(0x08611600)) /* Resets machine */
++#define AVALANCHE_PSUSTBY_REG (KSEG1ADDR(0x08611600)) /* Turns off power supply unit */
++#define AVALANCHE_GORESET 0x1
++#define AVALANCHE_GOSTBY 0x1
++#define AVALANCHE_SWRCR (*(unsigned int *)TNETD73XX_RST_CTRL_SWRCR)
++
++/*
++ * Avalanche UART register base.
++ */
++
++#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 1 */
++#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
++
++/*
++ * AVALANCHE DMA controller base
++ */
++
++#define AVALANCHE_DMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* DMA 0 (channels 0-3) */
++
++
++
++/*
++ * GPIO register map
++ */
++
++/* to be obtained from avalanche_map.h */
++#define AVALANCHE_GPIO_WRITE_REG (KSEG1ADDR(0xa8610904))
++#define AVALANCHE_GPIO_DIRECTION_REG (KSEG1ADDR(0xa8610908))
++#define AVALANCHE_GPIO_MODE_REG (KSEG1ADDR(0xa861090C))
++#define AVALANCHE_GPIO_PIN_COUNT 32
++#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0,0}
++
++
++// Let us define board specific information here.
++
++#if defined(CONFIG_AR7DB)
++
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
++#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x55555555
++
++#endif
++
++
++#if defined(CONFIG_AR7RD)
++
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
++
++#if defined(CONFIG_AR7_MARVELL)
++#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000
++#else
++#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2
++#endif
++
++#endif
++
++
++#if defined(CONFIG_AR7WRD)
++
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000
++
++#if defined(CONFIG_AR7_MARVELL)
++#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000
++#else
++#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2
++#endif
++
++#endif
++
++extern unsigned int tnetd73xx_vbus_freq;
++#define AVALANCHE_VBUS_FREQ tnetd73xx_vbus_freq
++
++static inline unsigned int get_avalanche_vbus_freq(void)
++{
++ return (tnetd73xx_vbus_freq);
++}
++
++#endif /*_MIPS_AR7_H */
+diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche.h linux-2.4.30.current/include/asm-mips/ar7/avalanche.h
+--- linux-2.4.30/include/asm-mips/ar7/avalanche.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/avalanche.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,183 @@
++/* $Id$
++ *
++ * avalanche.h
++ *
++ * Jeff Harrell, jharrell@ti.com
++ * Copyright (C) 2000,2001,2002 Texas Instruments Inc.
++ *
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Defines of the AVALANCHE board specific address-MAP, registers, etc.
++ *
++ */
++#ifndef _MIPS_AVALANCHE_H
++#define _MIPS_AVALANCHE_H
++
++#include <asm/addrspace.h>
++
++/*
++ * AVALANCHE board SDRAM base address. This is used to setup the
++ * bootmem tables
++ */
++
++#define AVALANCHE_SDRAM_BASE 0x14000000UL
++
++/*
++ * AVALANCHE board vectors
++ */
++
++#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
++/*
++ * Avalanche RTC-device indirect register access.
++ */
++
++#define EVM3_RTC_ADR_REG (KSEG1ADDR(0x1f000800))
++#define EVM3_RTC_DAT_REG (KSEG1ADDR(0x1f000808))
++
++/*
++ * Evm3 interrupt controller register base (primary)
++ */
++
++#define AVALANCHE_ICTRL_REGS_BASE (KSEG1ADDR(0x08612400))
++
++/*
++ * Avalanche exception controller register base (secondary)
++ */
++#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE+0x80)
++
++
++/*
++ * Avalanche Interrupt Channel Control register base
++ */
++#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
++
++
++/*
++ * Avalanche UART register base.
++ */
++
++#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 1 */
++#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
++/*
++ * AVALANCHE DMA controller base
++ */
++
++#define AVALANCHE_DMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* DMA 0 (channels 0-3) */
++
++
++/*
++ * AVALANCHE display register base.
++ */
++
++#define EVM3_ASCII_DISPLAY_POS_BASE (KSEG1ADDR(0x1D000038))
++#define EVM3_ASCII_DISPLAY_WORD_BASE (KSEG1ADDR(0x1D00003F)) /* How is this used??? JAH */
++
++
++#define EVM3_ASCIIPOS0 0x1D000038
++#define EVM3_ASCIIPOS1 0x1D000039
++#define EVM3_ASCIIPOS2 0x1D00003A
++#define EVM3_ASCIIPOS3 0x1D00003B
++#define EVM3_ASCIIPOS4 0x1D00003C
++#define EVM3_ASCIIPOS5 0x1D00003D
++#define EVM3_ASCIIPOS6 0x1D00003E
++#define EVM3_ASCIIPOS7 0x1D00003F
++
++/*
++ * Yamon Prom print address.
++ */
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
++#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++
++/*
++ * Evm3 Reset and PSU standby register.
++ */
++#define AVALANCHE_SOFTRES_REG (KSEG1ADDR(0x08611600)) /* Resets machine */
++#define AVALANCHE_PSUSTBY_REG (KSEG1ADDR(0x08611600)) /* Turns off power supply unit */
++#define AVALANCHE_GORESET 0x1
++#define AVALANCHE_GOSTBY 0x1
++
++/************************************************************************
++ * PERIPHERAL BUS LEDs (P-LED):
++*************************************************************************/
++
++/************************************************************************
++ * P-LED Register Addresses
++*************************************************************************/
++
++#define EVM3_PLED (KSEG1ADDR(0x01C500000)) /* 0x1D200000 P-LED */
++
++
++/************************************************************************
++ * Register field encodings
++*************************************************************************/
++
++/******** reg: PLED ********/
++/* bits 7:0: VAL */
++#define EVM3_PLED_VAL_MSK 0xff
++
++/* bit 0: */
++#define EVM3_PLED_BIT0_SHF 0
++#define EVM3_PLED_BIT0_MSK (1 << EVM3_PLED_BIT0_SHF)
++#define EVM3_PLED_BIT0_ON EVM3_PLED_BIT0_MSK
++
++/* bit 1: */
++#define EVM3_PLED_BIT1_SHF 1
++#define EVM3_PLED_BIT1_MSK (1 << EVM3_PLED_BIT1_SHF)
++#define EVM3_PLED_BIT1_ON EVM3_PLED_BIT1_MSK
++
++/* bit 2: */
++#define EVM3_PLED_BIT2_SHF 2
++#define EVM3_PLED_BIT2_MSK (1 << EVM3_PLED_BIT2_SHF)
++#define EVM3_PLED_BIT2_ON EVM3_PLED_BIT2_MSK
++
++/* bit 3: */
++#define EVM3_PLED_BIT3_SHF 3
++#define EVM3_PLED_BIT3_MSK (1 << EVM3_PLED_BIT3_SHF)
++#define EVM3_PLED_BIT3_ON EVM3_PLED_BIT3_MSK
++
++/* bit 4: */
++#define EVM3_PLED_BIT4_SHF 4
++#define EVM3_PLED_BIT4_MSK (1 << EVM3_PLED_BIT4_SHF)
++#define EVM3_PLED_BIT4_ON EVM3_PLED_BIT4_MSK
++
++/* bit 5: */
++#define EVM3_PLED_BIT5_SHF 5
++#define EVM3_PLED_BIT5_MSK (1 << EVM3_PLED_BIT5_SHF)
++#define EVM3_PLED_BIT5_ON EVM3_PLED_BIT5_MSK
++
++/* bit 6: */
++#define EVM3_PLED_BIT6_SHF 6
++#define EVM3_PLED_BIT6_MSK (1 << EVM3_PLED_BIT6_SHF)
++#define EVM3_PLED_BIT6_ON EVM3_PLED_BIT6_MSK
++
++/* bit 7: */
++#define EVM3_PLED_BIT7_SHF 7
++#define EVM3_PLED_BIT7_MSK (1 << EVM3_PLED_BIT7_SHF)
++#define EVM3_PLED_BIT7_ON EVM3_PLED_BIT7_MSK
++
++#endif /* !(_MIPS_AVALANCHE_H) */
++
++
++
++
++
++
+diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_int.h linux-2.4.30.current/include/asm-mips/ar7/avalanche_int.h
+--- linux-2.4.30/include/asm-mips/ar7/avalanche_int.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/avalanche_int.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,298 @@
++/* $Id$
++ *
++ * avalancheint.h
++ *
++ * Jeff Harrell, jharrell@ti.com
++ * Copyright (C) 2000,2001 Texas Instruments , Inc.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Defines for the AVALANCHE interrupt controller.
++ *
++ */
++#ifndef _MIPS_AVALANCHEINT_H
++#define _MIPS_AVALANCHEINT_H
++
++#include <linux/config.h>
++
++/* Avalanche Interrupt number */
++#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
++/* Linux Interrupt number */
++#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
++/* Number of IRQ supported on hw interrupt 0. */
++
++//#define SEADINT_UART0 3 /* TTYS0 interrupt on SEAD */
++//#define SEADINT_UART1 4 /* TTYS1 interrupt on SEAD */
++
++
++#define MIPS_EXCEPTION_OFFSET 8
++#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
++
++
++#define AVALANCHE_INT_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + AVINTNUM(AVALANCHE_INT_END_SECONDARY) \
++ + MIPS_EXCEPTION_OFFSET - 1)
++
++struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
++{
++ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 */ /* 0x00 */
++ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 */ /* 0x04 */
++ volatile unsigned long unused1; /* 0x08 */
++ volatile unsigned long unused2; /* 0x0C */
++ volatile unsigned long intcr1; /* Interrupt Clear Register 1 */ /* 0x10 */
++ volatile unsigned long intcr2; /* Interrupt Clear Register 2 */ /* 0x14 */
++ volatile unsigned long unused3; /* 0x18 */
++ volatile unsigned long unused4; /* 0x1C */
++ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 */ /* 0x20 */
++ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 */ /* 0x24 */
++ volatile unsigned long unused5; /* 0x28 */
++ volatile unsigned long unused6; /* 0x2C */
++ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 */ /* 0x30 */
++ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 */ /* 0x34 */
++ volatile unsigned long unused7; /* 0x38 */
++ volatile unsigned long unused8; /* 0x3c */
++ volatile unsigned long pintir; /* Priority Interrupt Index Register */ /* 0x40 */
++ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg.*/ /* 0x44 */
++ volatile unsigned long unused9; /* 0x48 */
++ volatile unsigned long unused10; /* 0x4C */
++ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 1*/ /* 0x50 */
++ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 2*/ /* 0x54 */
++};
++
++struct avalanche_exctrl_regs /* Avalanche Exception control registers */
++{
++ volatile unsigned long exsr; /* Exceptions Status/Set register */ /* 0x80 */
++ volatile unsigned long reserved; /* 0x84 */
++ volatile unsigned long excr; /* Exceptions Clear Register */ /* 0x88 */
++ volatile unsigned long reserved1; /* 0x8c */
++ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) */ /* 0x90 */
++ volatile unsigned long reserved2; /* 0x94 */
++ volatile unsigned long exiecr; /* Exceptions Interrupt Enable (clear)*/ /* 0x98 */
++};
++
++struct avalanche_channel_int_number
++{
++ volatile unsigned long cintnr0; /* Channel Interrupt Number Register */ /* 0x200 */
++ volatile unsigned long cintnr1; /* Channel Interrupt Number Register */ /* 0x204 */
++ volatile unsigned long cintnr2; /* Channel Interrupt Number Register */ /* 0x208 */
++ volatile unsigned long cintnr3; /* Channel Interrupt Number Register */ /* 0x20C */
++ volatile unsigned long cintnr4; /* Channel Interrupt Number Register */ /* 0x210 */
++ volatile unsigned long cintnr5; /* Channel Interrupt Number Register */ /* 0x214 */
++ volatile unsigned long cintnr6; /* Channel Interrupt Number Register */ /* 0x218 */
++ volatile unsigned long cintnr7; /* Channel Interrupt Number Register */ /* 0x21C */
++ volatile unsigned long cintnr8; /* Channel Interrupt Number Register */ /* 0x220 */
++ volatile unsigned long cintnr9; /* Channel Interrupt Number Register */ /* 0x224 */
++ volatile unsigned long cintnr10; /* Channel Interrupt Number Register */ /* 0x228 */
++ volatile unsigned long cintnr11; /* Channel Interrupt Number Register */ /* 0x22C */
++ volatile unsigned long cintnr12; /* Channel Interrupt Number Register */ /* 0x230 */
++ volatile unsigned long cintnr13; /* Channel Interrupt Number Register */ /* 0x234 */
++ volatile unsigned long cintnr14; /* Channel Interrupt Number Register */ /* 0x238 */
++ volatile unsigned long cintnr15; /* Channel Interrupt Number Register */ /* 0x23C */
++ volatile unsigned long cintnr16; /* Channel Interrupt Number Register */ /* 0x240 */
++ volatile unsigned long cintnr17; /* Channel Interrupt Number Register */ /* 0x244 */
++ volatile unsigned long cintnr18; /* Channel Interrupt Number Register */ /* 0x248 */
++ volatile unsigned long cintnr19; /* Channel Interrupt Number Register */ /* 0x24C */
++ volatile unsigned long cintnr20; /* Channel Interrupt Number Register */ /* 0x250 */
++ volatile unsigned long cintnr21; /* Channel Interrupt Number Register */ /* 0x254 */
++ volatile unsigned long cintnr22; /* Channel Interrupt Number Register */ /* 0x358 */
++ volatile unsigned long cintnr23; /* Channel Interrupt Number Register */ /* 0x35C */
++ volatile unsigned long cintnr24; /* Channel Interrupt Number Register */ /* 0x260 */
++ volatile unsigned long cintnr25; /* Channel Interrupt Number Register */ /* 0x264 */
++ volatile unsigned long cintnr26; /* Channel Interrupt Number Register */ /* 0x268 */
++ volatile unsigned long cintnr27; /* Channel Interrupt Number Register */ /* 0x26C */
++ volatile unsigned long cintnr28; /* Channel Interrupt Number Register */ /* 0x270 */
++ volatile unsigned long cintnr29; /* Channel Interrupt Number Register */ /* 0x274 */
++ volatile unsigned long cintnr30; /* Channel Interrupt Number Register */ /* 0x278 */
++ volatile unsigned long cintnr31; /* Channel Interrupt Number Register */ /* 0x27C */
++ volatile unsigned long cintnr32; /* Channel Interrupt Number Register */ /* 0x280 */
++ volatile unsigned long cintnr33; /* Channel Interrupt Number Register */ /* 0x284 */
++ volatile unsigned long cintnr34; /* Channel Interrupt Number Register */ /* 0x288 */
++ volatile unsigned long cintnr35; /* Channel Interrupt Number Register */ /* 0x28C */
++ volatile unsigned long cintnr36; /* Channel Interrupt Number Register */ /* 0x290 */
++ volatile unsigned long cintnr37; /* Channel Interrupt Number Register */ /* 0x294 */
++ volatile unsigned long cintnr38; /* Channel Interrupt Number Register */ /* 0x298 */
++ volatile unsigned long cintnr39; /* Channel Interrupt Number Register */ /* 0x29C */
++};
++
++struct avalanche_interrupt_line_to_channel
++{
++ unsigned long int_line0; /* Start of primary interrupts */
++ unsigned long int_line1;
++ unsigned long int_line2;
++ unsigned long int_line3;
++ unsigned long int_line4;
++ unsigned long int_line5;
++ unsigned long int_line6;
++ unsigned long int_line7;
++ unsigned long int_line8;
++ unsigned long int_line9;
++ unsigned long int_line10;
++ unsigned long int_line11;
++ unsigned long int_line12;
++ unsigned long int_line13;
++ unsigned long int_line14;
++ unsigned long int_line15;
++ unsigned long int_line16;
++ unsigned long int_line17;
++ unsigned long int_line18;
++ unsigned long int_line19;
++ unsigned long int_line20;
++ unsigned long int_line21;
++ unsigned long int_line22;
++ unsigned long int_line23;
++ unsigned long int_line24;
++ unsigned long int_line25;
++ unsigned long int_line26;
++ unsigned long int_line27;
++ unsigned long int_line28;
++ unsigned long int_line29;
++ unsigned long int_line30;
++ unsigned long int_line31;
++ unsigned long int_line32;
++ unsigned long int_line33;
++ unsigned long int_line34;
++ unsigned long int_line35;
++ unsigned long int_line36;
++ unsigned long int_line37;
++ unsigned long int_line38;
++ unsigned long int_line39;
++};
++
++/* Interrupt Line #'s (Avalanche peripherals) */
++
++/*------------------------------*/
++/* Avalanche primary interrupts */
++/*------------------------------*/
++#define UNIFIED_SECONDARY_INTERRUPT 0
++#define AVALANCHE_EXT_INT_0 1
++#define AVALANCHE_EXT_INT_1 2
++#define AVALANCHE_EXT_INT_2 3
++#define AVALANCHE_EXT_INT_3 4
++#define AVALANCHE_TIMER_0_INT 5
++#define AVALANCHE_TIMER_1_INT 6
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++#define AVALANCHE_PDMA_INT0 9
++#define AVALANCHE_PDMA_INT1 10
++#define AVALANCHE_HDLC_TXA 11
++#define AVALANCHE_HDLC_TXB 12
++#define AVALANCHE_HDLC_RXA 13
++#define AVALANCHE_HDLC_RXB 14
++#define AVALANCHE_ATM_SAR_TXA 15
++#define AVALANCHE_ATM_SAR_TXB 16
++#define AVALANCHE_ATM_SAR_RXA 17
++#define AVALANCHE_ATM_SAR_RXB 18
++#define AVALANCHE_MAC_TXA 19
++#define AVALANCHE_MAC_RXA 20
++#define AVALANCHE_DSP_SUB0 21
++#define AVALANCHE_DSP_SUB1 22
++#define AVALANCHE_DES_INT 23
++#define AVALANCHE_USB_INT 24
++#define AVALANCHE_PCI_INTA 25
++#define AVALANCHE_PCI_INTB 26
++#define AVALANCHE_PCI_INTC 27
++/* Line #28 Reserved */
++#define AVALANCHE_I2CM_INT 29
++#define AVALANCHE_PDMA_INT2 30
++#define AVALANCHE_PDMA_INT3 31
++#define AVALANCHE_CODEC 32
++#define AVALANCHE_MAC_TXB 33
++#define AVALANCHE_MAC_RXB 34
++/* Line #35 Reserved */
++/* Line #36 Reserved */
++/* Line #37 Reserved */
++/* Line #38 Reserved */
++/* Line #39 Reserved */
++
++#define DEBUG_MISSED_INTS 1
++
++#ifdef DEBUG_MISSED_INTS
++struct debug_missed_int
++{
++ unsigned int atm_sar_txa;
++ unsigned int atm_sar_txb;
++ unsigned int atm_sar_rxa;
++ unsigned int atm_sar_rxb;
++ unsigned int mac_txa;
++ unsigned int mac_rxa;
++ unsigned int mac_txb;
++ unsigned int mac_rxb;
++};
++#endif /* DEBUG_MISSED_INTS */
++
++/*-----------------------------------*/
++/* Avalanche Secondary Interrupts */
++/*-----------------------------------*/
++#define PRIMARY_INTS 40
++
++#define AVALANCHE_HDLC_STATUS (0 + PRIMARY_INTS)
++#define AVALANCHE_SAR_STATUS (1 + PRIMARY_INTS)
++/* Line #02 Reserved */
++#define AVALANCHE_ETH_MACA_LNK_CHG (3 + PRIMARY_INTS)
++#define AVALANCHE_ETH_MACA_MGT (4 + PRIMARY_INTS)
++#define AVALANCHE_PCI_STATUS_INT (5 + PRIMARY_INTS)
++/* Line #06 Reserved */
++#define AVALANCHE_EXTERN_MEM_INT (7 + PRIMARY_INTS)
++#define AVALANCHE_DSP_A_DOG (8 + PRIMARY_INTS)
++#define AVALANCHE_DSP_B_DOG (9 + PRIMARY_INTS)
++/* Line #10-#20 Reserved */
++#define AVALANCHE_ETH_MACB_LNK_CHG (21 + PRIMARY_INTS)
++#define AVALANCHE_ETH_MACB_MGT (22 + PRIMARY_INTS)
++#define AVALANCHE_AAL2_STATUS (23 + PRIMARY_INTS)
++/* Line #24-#31 Reserved */
++
++#define AVALANCHEINT_UART0 LNXINTNUM(AVALANCHE_UART0_INT)
++#define AVALANCHEINT_UART1 LNXINTNUM(AVALANCHE_UART1_INT)
++#define SEADINT_UART0 3 /* TTYS0 interrupt on SEAD */
++#define SEADINT_UART1 4 /* TTYS1 interrupt on SEAD */
++
++#ifdef JIMK_INT_CTRLR
++/*-----------------------------------*/
++/* Jim Kennedy's Interrupt Controller*/
++/*-----------------------------------*/
++
++/* to clear the interrupt write the bit back to the status reg */
++
++#define JIMK_INT_STATUS (*(volatile unsigned int *)(0xA8612400))
++#define JIMK_INT_MASK (*(volatile unsigned int *)(0xA8612404))
++#define JIMK_SAR_STATUS (1<<0)
++#define JIMK_SAR_TX_A (1<<1)
++#define JIMK_SAR_TX_B (1<<2)
++#define JIMK_SAR_RX_A (1<<3)
++#define JIMK_SAR_RX_B (1<<4)
++#define JIMK_AAL2_STATUS (1<<5)
++#define JIMK_UART0_INT (1<<11)
++
++#ifdef SEAD_USB_DEVELOPMENT
++#define JIMK_USB_INT (1<<0)
++#endif /* SEAD_USB_DEVELOPMENT */
++
++#endif /* JIMK_INT_CTRLR */
++
++extern void avalanche_int_set(int channel, int line);
++extern void avalancheint_init(void);
++
++
++#endif /* !(_MIPS_AVALANCHEINT_H) */
++
++
++
++
+diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_intc.h linux-2.4.30.current/include/asm-mips/ar7/avalanche_intc.h
+--- linux-2.4.30/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/avalanche_intc.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,273 @@
++ /*
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2000 Texas Instruments Inc.
++ *
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Defines of the Sead board specific address-MAP, registers, etc.
++ *
++ */
++#ifndef _AVALANCHE_INTC_H
++#define _AVALANCHE_INTC_H
++
++#define MIPS_EXCEPTION_OFFSET 8
++
++/******************************************************************************
++ Avalanche Interrupt number
++******************************************************************************/
++#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
++
++/*******************************************************************************
++*Linux Interrupt number
++*******************************************************************************/
++#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
++
++
++
++#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
++
++
++#define AVALANCHE_INT_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
++ AVINTNUM(AVALANCHE_INT_END_SECONDARY) \
++ + MIPS_EXCEPTION_OFFSET - 1) /* Suraj, check */
++
++
++/*
++ * Avalanche interrupt controller register base (primary)
++ */
++#define AVALANCHE_ICTRL_REGS_BASE AVALANCHE_INTC_BASE
++
++/******************************************************************************
++ * Avalanche exception controller register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x80)
++
++
++/******************************************************************************
++ * Avalanche Interrupt pacing register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_IPACE_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0xA0)
++
++
++
++/******************************************************************************
++ * Avalanche Interrupt Channel Control register base
++ *****************************************************************************/
++#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
++
++
++struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
++{
++ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 0x00 */
++ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 0x04 */
++ volatile unsigned long unused1; /*0x08 */
++ volatile unsigned long unused2; /*0x0C */
++ volatile unsigned long intcr1; /* Interrupt Clear Register 1 0x10 */
++ volatile unsigned long intcr2; /* Interrupt Clear Register 2 0x14 */
++ volatile unsigned long unused3; /*0x18 */
++ volatile unsigned long unused4; /*0x1C */
++ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 0x20 */
++ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 0x24 */
++ volatile unsigned long unused5; /*0x28 */
++ volatile unsigned long unused6; /*0x2C */
++ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 0x30 */
++ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 0x34 */
++ volatile unsigned long unused7; /* 0x38 */
++ volatile unsigned long unused8; /* 0x3c */
++ volatile unsigned long pintir; /* Priority Interrupt Index Register 0x40 */
++ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg 0x44 */
++ volatile unsigned long unused9; /* 0x48 */
++ volatile unsigned long unused10; /* 0x4C */
++ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 10x50 */
++ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 20x54 */
++ volatile unsigned long unused11; /* 0x58 */
++ volatile unsigned long unused12; /*0x5C */
++ volatile unsigned long inttypr1; /* Interrupt Type Mask register 10x60 */
++ volatile unsigned long inttypr2; /* Interrupt Type Mask register 20x64 */
++};
++
++struct avalanche_exctrl_regs /* Avalanche Exception control registers */
++{
++ volatile unsigned long exsr; /* Exceptions Status/Set register 0x80 */
++ volatile unsigned long reserved; /*0x84 */
++ volatile unsigned long excr; /* Exceptions Clear Register 0x88 */
++ volatile unsigned long reserved1; /*0x8c */
++ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) 0x90 */
++ volatile unsigned long reserved2; /*0x94 */
++ volatile unsigned long exiecr; /* Exceptions Interrupt Enable(clear)0x98 */
++};
++struct avalanche_ipace_regs
++{
++
++ volatile unsigned long ipacep; /* Interrupt pacing register 0xa0 */
++ volatile unsigned long ipacemap; /*Interrupt Pacing Map Register 0xa4 */
++ volatile unsigned long ipacemax; /*Interrupt Pacing Max Register 0xa8 */
++};
++struct avalanche_channel_int_number
++{
++ volatile unsigned long cintnr0; /* Channel Interrupt Number Register0x200 */
++ volatile unsigned long cintnr1; /* Channel Interrupt Number Register0x204 */
++ volatile unsigned long cintnr2; /* Channel Interrupt Number Register0x208 */
++ volatile unsigned long cintnr3; /* Channel Interrupt Number Register0x20C */
++ volatile unsigned long cintnr4; /* Channel Interrupt Number Register0x210 */
++ volatile unsigned long cintnr5; /* Channel Interrupt Number Register0x214 */
++ volatile unsigned long cintnr6; /* Channel Interrupt Number Register0x218 */
++ volatile unsigned long cintnr7; /* Channel Interrupt Number Register0x21C */
++ volatile unsigned long cintnr8; /* Channel Interrupt Number Register0x220 */
++ volatile unsigned long cintnr9; /* Channel Interrupt Number Register0x224 */
++ volatile unsigned long cintnr10; /* Channel Interrupt Number Register0x228 */
++ volatile unsigned long cintnr11; /* Channel Interrupt Number Register0x22C */
++ volatile unsigned long cintnr12; /* Channel Interrupt Number Register0x230 */
++ volatile unsigned long cintnr13; /* Channel Interrupt Number Register0x234 */
++ volatile unsigned long cintnr14; /* Channel Interrupt Number Register0x238 */
++ volatile unsigned long cintnr15; /* Channel Interrupt Number Register0x23C */
++ volatile unsigned long cintnr16; /* Channel Interrupt Number Register0x240 */
++ volatile unsigned long cintnr17; /* Channel Interrupt Number Register0x244 */
++ volatile unsigned long cintnr18; /* Channel Interrupt Number Register0x248 */
++ volatile unsigned long cintnr19; /* Channel Interrupt Number Register0x24C */
++ volatile unsigned long cintnr20; /* Channel Interrupt Number Register0x250 */
++ volatile unsigned long cintnr21; /* Channel Interrupt Number Register0x254 */
++ volatile unsigned long cintnr22; /* Channel Interrupt Number Register0x358 */
++ volatile unsigned long cintnr23; /* Channel Interrupt Number Register0x35C */
++ volatile unsigned long cintnr24; /* Channel Interrupt Number Register0x260 */
++ volatile unsigned long cintnr25; /* Channel Interrupt Number Register0x264 */
++ volatile unsigned long cintnr26; /* Channel Interrupt Number Register0x268 */
++ volatile unsigned long cintnr27; /* Channel Interrupt Number Register0x26C */
++ volatile unsigned long cintnr28; /* Channel Interrupt Number Register0x270 */
++ volatile unsigned long cintnr29; /* Channel Interrupt Number Register0x274 */
++ volatile unsigned long cintnr30; /* Channel Interrupt Number Register0x278 */
++ volatile unsigned long cintnr31; /* Channel Interrupt Number Register0x27C */
++ volatile unsigned long cintnr32; /* Channel Interrupt Number Register0x280 */
++ volatile unsigned long cintnr33; /* Channel Interrupt Number Register0x284 */
++ volatile unsigned long cintnr34; /* Channel Interrupt Number Register0x288 */
++ volatile unsigned long cintnr35; /* Channel Interrupt Number Register0x28C */
++ volatile unsigned long cintnr36; /* Channel Interrupt Number Register0x290 */
++ volatile unsigned long cintnr37; /* Channel Interrupt Number Register0x294 */
++ volatile unsigned long cintnr38; /* Channel Interrupt Number Register0x298 */
++ volatile unsigned long cintnr39; /* Channel Interrupt Number Register0x29C */
++};
++
++struct avalanche_interrupt_line_to_channel
++{
++ unsigned long int_line0; /* Start of primary interrupts */
++ unsigned long int_line1;
++ unsigned long int_line2;
++ unsigned long int_line3;
++ unsigned long int_line4;
++ unsigned long int_line5;
++ unsigned long int_line6;
++ unsigned long int_line7;
++ unsigned long int_line8;
++ unsigned long int_line9;
++ unsigned long int_line10;
++ unsigned long int_line11;
++ unsigned long int_line12;
++ unsigned long int_line13;
++ unsigned long int_line14;
++ unsigned long int_line15;
++ unsigned long int_line16;
++ unsigned long int_line17;
++ unsigned long int_line18;
++ unsigned long int_line19;
++ unsigned long int_line20;
++ unsigned long int_line21;
++ unsigned long int_line22;
++ unsigned long int_line23;
++ unsigned long int_line24;
++ unsigned long int_line25;
++ unsigned long int_line26;
++ unsigned long int_line27;
++ unsigned long int_line28;
++ unsigned long int_line29;
++ unsigned long int_line30;
++ unsigned long int_line31;
++ unsigned long int_line32;
++ unsigned long int_line33;
++ unsigned long int_line34;
++ unsigned long int_line35;
++ unsigned long int_line36;
++ unsigned long int_line37;
++ unsigned long int_line38;
++ unsigned long int_line39;
++};
++
++
++/* Interrupt Line #'s (Sangam peripherals) */
++
++/*------------------------------*/
++/* Sangam primary interrupts */
++/*------------------------------*/
++
++#define UNIFIED_SECONDARY_INTERRUPT 0
++#define AVALANCHE_EXT_INT_0 1
++#define AVALANCHE_EXT_INT_1 2
++/* Line #3 Reserved */
++/* Line #4 Reserved */
++#define AVALANCHE_TIMER_0_INT 5
++#define AVALANCHE_TIMER_1_INT 6
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++#define AVALANCHE_PDMA_INT0 9
++#define AVALANCHE_PDMA_INT1 10
++/* Line #11 Reserved */
++/* Line #12 Reserved */
++/* Line #13 Reserved */
++/* Line #14 Reserved */
++#define AVALANCHE_ATM_SAR_INT 15
++/* Line #16 Reserved */
++/* Line #17 Reserved */
++/* Line #18 Reserved */
++#define AVALANCHE_MAC0_INT 19
++/* Line #20 Reserved */
++#define AVALANCHE_VLYNQ0_INT 21
++#define AVALANCHE_CODEC_WAKE_INT 22
++/* Line #23 Reserved */
++#define AVALANCHE_USB_INT 24
++#define AVALANCHE_VLYNQ1_INT 25
++/* Line #26 Reserved */
++/* Line #27 Reserved */
++#define AVALANCHE_MAC1_INT 28
++#define AVALANCHE_I2CM_INT 29
++#define AVALANCHE_PDMA_INT2 30
++#define AVALANCHE_PDMA_INT3 31
++/* Line #32 Reserved */
++/* Line #33 Reserved */
++/* Line #34 Reserved */
++/* Line #35 Reserved */
++/* Line #36 Reserved */
++#define AVALANCHE_VDMA_VT_RX_INT 37
++#define AVALANCHE_VDMA_VT_TX_INT 38
++#define AVALANCHE_ADSLSS_INT 39
++
++/*-----------------------------------*/
++/* Sangam Secondary Interrupts */
++/*-----------------------------------*/
++#define PRIMARY_INTS 40
++
++#define EMIF_INT (7 + PRIMARY_INTS)
++
++
++extern void avalanche_int_set(int channel, int line);
++
++
++#endif /* _AVALANCHE_INTC_H */
+diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_prom.h linux-2.4.30.current/include/asm-mips/ar7/avalanche_prom.h
+--- linux-2.4.30/include/asm-mips/ar7/avalanche_prom.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/avalanche_prom.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,54 @@
++/* $Id$
++ *
++ * prom.h
++ *
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999 MIPS Technologies, Inc.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Sead bootprom interface for the Linux kernel.
++ *
++ */
++
++#ifndef _MIPS_PROM_H
++#define _MIPS_PROM_H
++
++extern char *prom_getcmdline(void);
++extern char *prom_getenv(char *name);
++extern void setup_prom_printf(void);
++extern void prom_printf(char *fmt, ...);
++extern void prom_init_cmdline(void);
++extern void prom_meminit(void);
++extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
++extern void prom_free_prom_memory (void);
++extern void sead_display_message(const char *str);
++extern void sead_display_word(unsigned int num);
++extern int get_ethernet_addr(char *ethernet_addr);
++
++/* Memory descriptor management. */
++#define PROM_MAX_PMEMBLOCKS 32
++struct prom_pmemblock {
++ unsigned long base; /* Within KSEG0. */
++ unsigned int size; /* In bytes. */
++ unsigned int type; /* free or prom memory */
++};
++
++
++#endif /* !(_MIPS_PROM_H) */
++
+diff -urN linux-2.4.30/include/asm-mips/ar7/avalanche_regs.h linux-2.4.30.current/include/asm-mips/ar7/avalanche_regs.h
+--- linux-2.4.30/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/avalanche_regs.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,567 @@
++/*
++ * $Id$
++ * Avalanche Register Descriptions
++ *
++ * Jeff Harrell, jharrell@ti.com
++ * 2000 (c) Texas Instruments Inc.
++ */
++
++#ifndef __AVALANCHE_REGS_H
++#define __AVALANCHE_REGS_H
++
++#include <asm/addrspace.h>
++#include <linux/config.h>
++
++/*----------------------------------------*/
++/* Base offsets within the Avalanche ASIC */
++/*----------------------------------------*/
++
++#define BBIF_SPACE0 (KSEG1ADDR(0x01000000))
++#define BBIF_SPACE1 (KSEG1ADDR(0x01800000))
++#define BBIF_CONTROL (KSEG1ADDR(0x02000000))
++#define ATM_SAR_BASE (KSEG1ADDR(0x03000000))
++#define USB_MCU_BASE (KSEG1ADDR(0x03400000))
++#define DES_BASE (KSEG1ADDR(0x08600000))
++#define ETH_MACA_BASE (KSEG1ADDR(0x08610000))
++#define ETH_MACB_BASE (KSEG1ADDR(0x08612800))
++#define MEM_CTRLR_BASE (KSEG1ADDR(0x08610800))
++#define GPIO_BASE (KSEG1ADDR(0x08610900))
++#define CLK_CTRL_BASE (KSEG1ADDR(0x08610A00))
++#define WATCH_DOG_BASE (KSEG1ADDR(0x08610B00))
++#define TMR1_BASE (KSEG1ADDR(0x08610C00))
++#define TRM2_BASE (KSEG1ADDR(0x08610D00))
++#define UARTA_BASE (KSEG1ADDR(0x08610E00))
++#define UARTB_BASE (KSEG1ADDR(0x08610F00))
++#define I2C_BASE (KSEG1ADDR(0x08611000))
++#define DEV_ID_BASE (KSEG1ADDR(0x08611100))
++#define USB_BASE (KSEG1ADDR(0x08611200))
++#define PCI_CONFIG_BASE (KSEG1ADDR(0x08611300))
++#define DMA_BASE (KSEG1ADDR(0x08611400))
++#define RESET_CTRL_BASE (KSEG1ADDR(0x08611600))
++#define DSL_IF_BASE (KSEG1ADDR(0x08611B00))
++#define INT_CTL_BASE (KSEG1ADDR(0x08612400))
++#define PHY_BASE (KSEG1ADDR(0x1E000000))
++
++/*---------------------------------*/
++/* Device ID, chip version number */
++/*---------------------------------*/
++
++#define AVALANCHE_CHVN (*(volatile unsigned int *)(DEV_ID_BASE+0x14))
++#define AVALANCHE_DEVID1 (*(volatile unsigned int *)(DEV_ID_BASE+0x18))
++#define AVALANCHE_DEVID2 (*(volatile unsigned int *)(DEV_ID_BASE+0x1C))
++
++/*----------------------------------*/
++/* Reset Control VW changed to ptrs */
++/*----------------------------------*/
++
++#define AVALANCHE_PRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x0)) /* Peripheral reset control */
++#define AVALANCHE_SWRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x4)) /* Software reset control */
++#define AVALANCHE_RSR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x8)) /* Reset status register */
++
++/* reset control bits */
++
++#define AV_RST_UART0 (1<<0) /* Brings UART0 out of reset */
++#define AV_RST_UART1 (1<<1) /* Brings UART1 out of reset */
++#define AV_RST_IICM (1<<2) /* Brings the I2CM out of reset */
++#define AV_RST_TIMER0 (1<<3) /* Brings Timer 0 out of reset */
++#define AV_RST_TIMER1 (1<<4) /* Brings Timer 1 out of reset */
++#define AV_RST_DES (1<<5) /* Brings the DES module out of reset */
++#define AV_RST_GPIO (1<<6) /* Brings the GPIO module out of reset (see note below) */
++/*
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++ If you reset the GPIO interface all of the directions (i/o) of the UART B
++ interface pins are inputs and must be reconfigured so as not to lose the
++ serial console interface
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++#define AV_RST_BBIF (1<<7) /* Brings the Broadband interface out of reset */
++#define AV_RST_USB (1<<8) /* Brings the USB module out of reset */
++#define AV_RST_SAR (1<<9) /* Brings the SAR out of reset */
++#define AV_RST_HDLC (1<<10) /* Brings the HDLC module out of reset */
++#define AV_RST_PCI (1<<16) /* Brings the PCI module out of reset */
++#define AV_RST_ETH_MAC0 (1<<17) /* Brings the Ethernet MAC0 out of reset */
++#define AV_RST_PICO_DMA (1<<18) /* Brings the PICO DMA module out of reset */
++#define AV_RST_BIST (1<<19) /* Brings the BIST module out of reset */
++#define AV_RST_DSP (1<<20) /* Brings the DSP sub system out of reset */
++#define AV_RST_ETH_MAC1 (1<<21) /* Brings the Ethernet MAC1 out of reset */
++
++/*----------------------*/
++/* Physical interfaces */
++/*----------------------*/
++
++/* Phy loopback */
++#define PHY_LOOPBACK 1
++
++
++/* Phy 0 */
++#define PHY0BASE (PHY_BASE)
++#define PHY0RST (*(volatile unsigned char *) (PHY0BASE)) /* reset */
++#define PHY0CTRL (*(volatile unsigned char *) (PHY0BASE+0x5)) /* control */
++#define PHY0RACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x50)) /* RACP control/status */
++#define PHY0TACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x60)) /* TACP idle/unassigned cell hdr */
++#define PHY0RACPINT (*(volatile unsigned char *) (PHY0BASE+0x51)) /* RACP interrupt enable/Status */
++
++
++/* Phy 1 */
++
++#define PHY1BASE (PHY_BASE + 0x100000)
++#define PHY1RST (*(volatile unsigned char *) (PHY1BASE)) /* reset */
++#define PHY1CTRL (*(volatile unsigned char *) (PHY1BASE+0x5)) /* control */
++#define PHY1RACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x50))
++#define PHY1TACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x60))
++#define PHY1RACPINT (*(volatile unsigned char *) (PHY1BASE+0x51))
++
++/* Phy 2 */
++
++#define PHY2BASE (PHY_BASE + 0x200000)
++#define PHY2RST (*(volatile unsigned char *) (PHY2BASE)) /* reset */
++#define PHY2CTRL (*(volatile unsigned char *) (PHY2BASE+0x5)) /* control */
++#define PHY2RACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x50))
++#define PHY2TACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x60))
++#define PHY2RACPINT (*(volatile unsigned char *) (PHY2BASE+0x51))
++
++/*-------------------*/
++/* Avalanche ATM SAR */
++/*-------------------*/
++
++#define AVSAR_SYSCONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000000)) /* SAR system config register */
++#define AVSAR_SYSSTATUS (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000004)) /* SAR system status register */
++#define AVSAR_INT_ENABLE (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000008)) /* SAR interrupt enable register */
++#define AVSAR_CONN_VPI_VCI (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000000c)) /* VPI/VCI connection config */
++#define AVSAR_CONN_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000010)) /* Connection config register */
++#define AVSAR_OAM_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) /* OAM configuration register */
++
++/* Transmit completion ring registers */
++
++#define AVSAR_TCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000100))
++#define AVSAR_TCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000104))
++#define AVSAR_TCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000108))
++#define AVSAR_TCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000010c))
++#define AVSAR_TCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000110))
++#define AVSAR_TCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000114))
++#define AVSAR_TCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000118))
++#define AVSAR_TCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000011c))
++#define AVSAR_TCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000120))
++#define AVSAR_TCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000124))
++#define AVSAR_TCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000128))
++#define AVSAR_TCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000012c))
++#define AVSAR_TCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000130))
++#define AVSAR_TCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000134))
++
++/* Transmit Queue Packet registers */
++#define AVSAR_TXQUEUE_PKT0 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000140))
++#define AVSAR_TXQUEUE_PKT1 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000144))
++#define AVSAR_TXQUEUE_PKT2 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000148))
++#define AVSAR_TX_FLUSH (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000014C))
++/* Receive completion ring registers */
++
++#define AVSAR_RCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000200))
++#define AVSAR_RCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000204))
++#define AVSAR_RCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000208))
++#define AVSAR_RCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000020c))
++#define AVSAR_RCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000210))
++#define AVSAR_RCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000214))
++#define AVSAR_RCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000218))
++#define AVSAR_RCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000021c))
++#define AVSAR_RCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000220))
++#define AVSAR_RCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000224))
++#define AVSAR_RCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000228))
++#define AVSAR_RCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000022c))
++#define AVSAR_RCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000230))
++#define AVSAR_RCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000234))
++
++#define AVSAR_RXFBL_ADD0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000240)) /* Rx Free buffer list add 0 */
++#define AVSAR_RXFBL_ADD1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000244)) /* Rx Free buffer list add 1 */
++#define AVSAR_RXFBL_ADD2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000248)) /* Rx Free buffer list add 2 */
++#define AVSAR_RXFBLSIZE_0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000028c)) /* Rx Free buffer list size 0 */
++#define AVSAR_RXFBLSIZE_1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000029c)) /* Rx Free buffer list size 1 */
++#define AVSAR_RXFBLSIZE_2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002ac)) /* Rx Free buffer list size 2 */
++#define AVSAR_RXFBLSIZE_3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002bc)) /* Rx Free buffer list size 3 */
++
++
++#if defined(CONFIG_MIPS_EVM3D) || defined(CONFIG_MIPS_AR5D01) || defined(CONFIG_MIPS_AR5W01)
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010480))
++#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010484))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010488))
++#define AVSAR_OAM_CPID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E0))
++#define AVSAR_OAM_LLID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F0))
++#define AVSAR_OAM_CPID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E4))
++#define AVSAR_OAM_LLID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F4))
++#define AVSAR_OAM_CPID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E8))
++#define AVSAR_OAM_LLID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F8))
++#define AVSAR_OAM_CPID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104EC))
++#define AVSAR_OAM_LLID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104FC))
++#define AVSAR_OAM_CORR_TAG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010500))
++#define AVSAR_OAM_FAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010520))
++#define AVSAR_OAM_NEAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010540))
++#define AVSAR_OAM_CONFIG_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018))
++#define AVSAR_FAIRNESS_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104B8))
++#define AVSAR_UBR_PCR_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010490))
++
++
++/*
++
++#define OAM_CPID_ADD 0xa30104e0
++
++#define OAM_LLID_ADD 0xa30104f0
++
++#define OAM_LLID_VAL 0xffffffff
++
++#define OAM_CORR_TAG 0xa3010500
++
++#define OAM_FAR_COUNT_ADD 0xa3010520
++
++#define OAM_NEAR_COUNT_ADD 0xa3010540
++
++#define OAM_CONFIG_REG_ADD 0xa3000018
++*/
++
++
++#else /* CONFIG_MIPS_EVM3 || CONFIG_MIPS_ACPEP */
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012000))
++#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012004))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012008))
++#define AVSAR_OAM_CPID (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012300))
++
++#endif /* CONFIG_MIPS_EVM3D || CONFIG_MIPS_AR5D01 || CONFIG_MIPS_AR5W01 */
++
++
++#define AVSAR_STATE_RAM (ATM_SAR_BASE + 0x010000) /* SAR state RAM */
++#define AVSAR_PDSP_BASE (ATM_SAR_BASE + 0x020000) /* SAR PDSP base address */
++#define AVSAR_TXDMA_BASE (ATM_SAR_BASE + 0x030000) /* Transmit DMA state base */
++#define AVSAR_TDMASTATE6 0x18 /* Transmit DMA state word 6 */
++#define AVSAR_RXDMA_BASE (ATM_SAR_BASE + 0x040000) /* Receive DMA state base */
++#define AVSAR_RDMASTATE0 0x0 /* Receive DMA state word 0 */
++
++/*------------------------------------------*/
++/* DSL Interface */
++/*------------------------------------------*/
++
++#define AVDSL_TX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000000))
++#define AVDSL_RX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000004))
++#define AVDSL_POLL (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000008))
++
++/* Fast */
++
++#define AVDSL_TX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000000C))
++#define AVDSL_TX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000010))
++#define AVDSL_TX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000014))
++#define AVDSL_TX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000018))
++#define AVDSL_RX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000001C))
++#define AVDSL_RX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000020))
++#define AVDSL_RX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000024))
++#define AVDSL_RX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000028))
++
++/* Interleaved */
++
++#define AVDSL_TX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000002C))
++#define AVDSL_TX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000030))
++#define AVDSL_TX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000034))
++#define AVDSL_TX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000038))
++#define AVDSL_RX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000003C))
++#define AVDSL_RX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000040))
++#define AVDSL_RX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000044))
++#define AVDSL_RX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000048))
++
++/*------------------------------------------*/
++/* Broadband I/F */
++/*------------------------------------------*/
++
++#define AVBBIF_BBIF_CNTRL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000000))
++#define AVBBIF_ADDR_TRANS_0 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000004))
++#define AVBBIF_ADDR_TRANS_1 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000008))
++#define AVBBIF_ADDR_XB_MX_BL (*(volatile unsigned int *)(BBIF_CONTROL + 0x0000000C))
++#define AVBBIF_INFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000010))
++#define AVBBIF_OUTFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000014))
++
++#define AVBBIF_DISABLED 0x0
++#define AVBBIF_LBT4040_INT 0x1
++#define AVBBIF_XBUS 0x2
++#define AVBBIF_LBT4040_EXT 0x4
++
++#define AVBBIF_ADDR_MASK0 0xff000000 /* handles upper bits of BBIF 0 address */
++#define AVBBIF_ADDR_MASK1 0xff800000 /* handles upper bits of BBIF 1 address */
++#define AVBBIF_TRANS_MASK 0xff000000
++/*------------------------------------------*/
++/* GPIO I/F */
++/*------------------------------------------*/
++
++#define GPIO_DATA_INPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000000))
++#define GPIO_DATA_OUTPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000004))
++#define GPIO_DATA_DIR (*(volatile unsigned int *)(GPIO_BASE + 0x00000008)) /* 0=output 1=input */
++#define GPIO_DATA_ENABLE (*(volatile unsigned int *)(GPIO_BASE + 0x0000000C)) /* 0=GPIO Mux 1=GPIO */
++
++#define GPIO_0 (1<<21)
++#define GPIO_1 (1<<22)
++#define GPIO_2 (1<<23)
++#define GPIO_3 (1<<24)
++#define EINT_1 (1<<18)
++
++/*
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++ If you reset the GPIO interface all of the directions (i/o) of the UART B
++ interface pins are inputs and must be reconfigured so as not to lose the
++ serial console interface
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++
++/*------------------------------------------*/
++/* CLK_CTRL */
++/*------------------------------------------*/
++#define PERIPH_CLK_CTL (*(volatile unsigned int *)(CLK_CTRL_BASE + 0x00000004))
++
++#define PCLK_0_HALF_VBUS (0<<16)
++#define PCLK_EQ_INPUT (1<<16)
++#define BBIF_CLK_HALF_VBUS (0<<17)
++#define BBIF_CLK_EQ_VBUS (1<<17)
++#define BBIF_CLK_EQ_BBCLK (3<<17)
++#define DSP_MODCLK_DSPCLKI (0<<20)
++#define DSP_MODCLK_REFCLKI (1<<20)
++#define USB_CLK_EQ_USBCLKI (0<<21)
++#define USB_CLK_EQ_REFCLKI (1<<21)
++
++/*------------------------------------------*/
++/* PCI Control Registers */
++/*------------------------------------------*/
++#define PCIC_CONTROL (*(volatile unsigned int *)(PCI_CONFIG_BASE))
++#define PCIC_CONTROL_CFG_DONE (1<<0)
++#define PCIC_CONTROL_DIS_SLAVE_TO (1<<1)
++#define PCIC_CONTROL_FORCE_DELAY_READ (1<<2)
++#define PCIC_CONTROL_FORCE_DELAY_READ_LINE (1<<3)
++#define PCIC_CONTROL_FORCE_DELAY_READ_MULT (1<<4)
++#define PCIC_CONTROL_MEM_SPACE_EN (1<<5)
++#define PCIC_CONTROL_MEM_MASK (1<<6)
++#define PCIC_CONTROL_IO_SPACE_EN (1<<7)
++#define PCIC_CONTROL_IO_MASK (1<<8)
++/* PCIC_CONTROL_RESERVED (1<<9) */
++#define PCIC_CONTROL_BASE0_EN (1<<10)
++#define PCIC_CONTROL_BASE1_EN (1<<11)
++#define PCIC_CONTROL_BASE2_EN (1<<12)
++#define PCIC_CONTROL_HOLD_MASTER_WRITE (1<<13)
++#define PCIC_CONTROL_ARBITER_EN (1<<14)
++#define PCIC_INT_SOURCE (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000004))
++#define PCIC_INT_SOURCE_PWR_MGMT (1<<0)
++#define PCIC_INT_SOURCE_PCI_TARGET (1<<1)
++#define PCIC_INT_SOURCE_PCI_MASTER (1<<2)
++#define PCIC_INT_SOURCE_POWER_WAKEUP (1<<3)
++#define PCIC_INT_SOURCE_PMEIN (1<<4)
++/* PCIC_INT_SOURCE_RESERVED (1<<5) */
++/* PCIC_INT_SOURCE_RESERVED (1<<6) */
++#define PCIC_INT_SOURCE_PIC_INTA (1<<7)
++#define PCIC_INT_SOURCE_PIC_INTB (1<<8)
++#define PCIC_INT_SOURCE_PIC_INTC (1<<9)
++#define PCIC_INT_SOURCE_PIC_INTD (1<<10)
++#define PCIC_INT_SOURCE_SOFT_INT0 (1<<11)
++#define PCIC_INT_SOURCE_SOFT_INT1 (1<<12)
++#define PCIC_INT_SOURCE_SOFT_INT2 (1<<13)
++#define PCIC_INT_SOURCE_SOFT_INT3 (1<<14)
++#define PCIC_INT_CLEAR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000008))
++#define PCIC_INT_CLEAR_PM (1<<0)
++#define PCIC_INT_CLEAR_PCI_TARGET (1<<1)
++#define PCIC_INT_CLEAR_PCI_MASTER (1<<2)
++/* PCIC_INT_CLEAR_RESERVED (1<<3) */
++#define PCIC_INT_CLEAR_PMEIN (1<<4)
++/* PCIC_INT_CLEAR_RESERVED (1<<5) */
++/* PCIC_INT_CLEAR_RESERVED (1<<6) */
++#define PCIC_INT_CLEAR_PCI_INTA (1<<7)
++#define PCIC_INT_CLEAR_PCI_INTB (1<<8)
++#define PCIC_INT_CLEAR_PCI_INTC (1<<9)
++#define PCIC_INT_CLEAR_PCI_INTD (1<<10)
++#define PCIC_INT_CLEAR_SOFT_INT0 (1<<11)
++#define PCIC_INT_CLEAR_SOFT_INT1 (1<<12)
++#define PCIC_INT_CLEAR_SOFT_INT2 (1<<13)
++#define PCIC_INT_CLEAR_SOFT_INT3 (1<<14)
++#define PCIC_INT_EN_AVAL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000000c))
++#define PCIC_INT_EN_AVAL_PM (1<<0)
++#define PCIC_INT_EN_AVAL_PCI_TARGET (1<<1)
++#define PCIC_INT_EN_AVAL_PCI_MASTER (1<<2)
++/* PCIC_INT_EN_AVAL_RESERVED (1<<3) */
++#define PCIC_INT_EN_AVAL_PMEIN (1<<4)
++/* PCIC_INT_EN_AVAL_RESERVED (1<<5) */
++/* PCIC_INT_EN_AVAL_RESERVED (1<<6) */
++#define PCIC_INT_EN_AVAL_PCI_INTA (1<<7)
++#define PCIC_INT_EN_AVAL_PCI_INTB (1<<8)
++#define PCIC_INT_EN_AVAL_PCI_INTC (1<<9)
++#define PCIC_INT_EN_AVAL_PCI_INTD (1<<10)
++#define PCIC_INT_EN_AVAL_SOFT_INT0 (1<<11)
++#define PCIC_INT_EN_AVAL_SOFT_INT1 (1<<12)
++#define PCIC_INT_EN_AVAL_SOFT_INT2 (1<<13)
++#define PCIC_INT_EN_AVAL_SOFT_INT3 (1<<14)
++#define PCIC_INT_EN_PCI (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000010))
++#define PCIC_INT_EN_PCI_PM (1<<0)
++#define PCIC_INT_EN_PCI_PCI_TARGET (1<<1)
++#define PCIC_INT_EN_PCI_PCI_MASTER (1<<2)
++/* PCIC_INT_EN_PCI_RESERVED (1<<3) */
++#define PCIC_INT_EN_PCI_PMEIN (1<<4)
++/* PCIC_INT_EN_PCI_RESERVED (1<<5) */
++/* PCIC_INT_EN_PCI_RESERVED (1<<6) */
++#define PCIC_INT_EN_PCI_PCI_INTA (1<<7)
++#define PCIC_INT_EN_PCI_PCI_INTB (1<<8)
++#define PCIC_INT_EN_PCI_PCI_INTC (1<<9)
++#define PCIC_INT_EN_PCI_PCI_INTD (1<<10)
++#define PCIC_INT_EN_PCI_SOFT_INT0 (1<<11)
++#define PCIC_INT_EN_PCI_SOFT_INT1 (1<<12)
++#define PCIC_INT_EN_PCI_SOFT_INT2 (1<<13)
++#define PCIC_INT_EN_PCI_SOFT_INT3 (1<<14)
++#define PCIC_INT_SWSET (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000014))
++#define PCIC_INT_SWSET_SOFT_INT0 (1<<0)
++#define PCIC_INT_SWSET_SOFT_INT1 (1<<1)
++#define PCIC_INT_SWSET_SOFT_INT2 (1<<2)
++#define PCIC_INT_SWSET_SOFT_INT3 (1<<3)
++#define PCIC_PM_CTL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000018))
++#define PCIC_PM_CTL_PWR_STATE_MASK (0x02)
++/* PCIC_PM_CTL_RESERVED (1<<2) */
++/* PCIC_PM_CTL_RESERVED (1<<3) */
++/* PCIC_PM_CTL_RESERVED (1<<4) */
++/* PCIC_PM_CTL_RESERVED (1<<5) */
++/* PCIC_PM_CTL_RESERVED (1<<6) */
++/* PCIC_PM_CTL_RESERVED (1<<7) */
++/* PCIC_PM_CTL_RESERVED (1<<8) */
++/* PCIC_PM_CTL_RESERVED (1<<9) */
++#define PCIC_PM_CTL_PWR_SUPPORT (1<<10)
++#define PCIC_PM_CTL_PMEIN (1<<11)
++#define PCIC_PM_CTL_CAP_MASK (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x0000001a))
++#define PCIC_PM_CONSUME (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000001c))
++#define PCIC_PM_CONSUME_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001c))
++#define PCIC_PM_CONSUME_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001d))
++#define PCIC_PM_CONSUME_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001e))
++#define PCIC_PM_CONSUME_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001f))
++#define PCIC_PM_DISSAPATED (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000020))
++#define PCIC_PM_DISSAPATED_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000020))
++#define PCIC_PM_DISSAPATED_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000021))
++#define PCIC_PM_DISSAPATED_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000022))
++#define PCIC_PM_DISSAPATED_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000023))
++#define PCIC_PM_DATA_SCALE (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x00000024))
++#define PCIC_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000028))
++#define PCIC_SUB_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000002c))
++#define PCIC_CLASS_REV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000030))
++#define PCIC_MAX_MIN (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000034))
++#define PCIC_MAST_MEM_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000003c))
++#define PCIC_MAST_MEM_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000040))
++#define PCIC_MAST_MEM_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000044))
++#define PCIC_SLAVE_MASK0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000004c))
++#define PCIC_SLAVE_MASK1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000050))
++#define PCIC_SLAVE_MASK2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000054))
++#define PCIC_SLAVE_BASE_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000058))
++#define PCIC_SLAVE_BASE_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000005c))
++#define PCIC_SLAVE_BASE_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000060))
++#define PCIC_CONF_COMMAND (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000090))
++#define PCIC_CONF_ADDR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000094))
++#define PCIC_CONF_DATA (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000098))
++
++/*------------------------------------------*/
++/* IIC_INTERFACE */
++/*------------------------------------------*/
++#define I2C_DATA_HI (*(volatile unsigned int *)(I2C_BASE + 0x0))
++#define I2C_DATA_LOW (*(volatile unsigned int *)(I2C_BASE + 0x4))
++#define I2C_CONFIG (*(volatile unsigned int *)(I2C_BASE + 0x8))
++#define I2C_DATA_READ (*(volatile unsigned int *)(I2C_BASE + 0xC))
++#define I2C_CLOCK_DIV (*(volatile unsigned int *)(I2C_BASE + 0x10))
++
++#define I2CWRITE 0x200
++#define I2CREAD 0x300
++#define I2C_END_BURST 0x400
++
++/* read bits */
++#define I2C_READ_ERROR 0x8000
++#define I2C_READ_COMPLETE 0x4000
++#define I2C_READ_BUSY 0x2000
++
++/* device types */
++#define I2C_IO_EXPANDER 0x2
++#define I2C_RTC 0xd
++
++/* device Addresses on I2C bus (EVM3) */
++#define SEVEN_SEGMENT_DISP 0x23 /* Device type = 0x2, Addr = 3 */
++#define EVM3_RTC 0xd0 /* Device type = 0xd, Addr = 0 */
++#define EVM3_RTC_I2C_ADDR 0x0
++
++/*------------------------------------------*/
++/* Ethernet MAC register offset definitions */
++/*------------------------------------------*/
++#define VMAC_DMACONFIG(X) (*(volatile unsigned int *)(X + 0x00000000))
++#define VMAC_INTSTS(X) (*(volatile unsigned int *)(X + 0x00000004))
++#define VMAC_INTMASK(X) (*(volatile unsigned int *)(X + 0x00000008))
++
++#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_STATSBASE(X) (*(volatile unsigned int *)(X + 0x00000400))
++
++#define VMAC_TCRPTR(X) (*(volatile unsigned int *)(X + 0x00000100))
++#define VMAC_TCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000104))
++#define VMAC_TCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000108))
++#define VMAC_TCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000010C))
++#define VMAC_TCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000110))
++#define VMAC_TCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000114))
++#define VMAC_TCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000118))
++#define VMAC_TXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000011c))
++
++
++#define VMAC_TDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000120))
++#define VMAC_TDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000124))
++#define VMAC_TDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000128))
++#define VMAC_TDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000012C))
++#define VMAC_TDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000130))
++#define VMAC_TDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000134))
++#define VMAC_TDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000138))
++#define VMAC_TDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000013C))
++#define VMAC_TXPADDCNT(X) (*(volatile unsigned int *)(X + 0x00000140))
++#define VMAC_TXPADDSTART(X) (*(volatile unsigned int *)(X + 0x00000144))
++#define VMAC_TXPADDEND(X) (*(volatile unsigned int *)(X + 0x00000148))
++#define VMAC_TXQFLUSH(X) (*(volatile unsigned int *)(X + 0x0000014C))
++
++#define VMAC_RCRPTR(X) (*(volatile unsigned int *)(X + 0x00000200))
++#define VMAC_RCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000204))
++#define VMAC_RCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000208))
++#define VMAC_RCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000020C))
++#define VMAC_RCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000210))
++#define VMAC_RCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000214))
++#define VMAC_RCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000218))
++#define VMAC_RXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000021c))
++
++#define VMAC_RDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000220))
++#define VMAC_RDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000224))
++#define VMAC_RDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000228))
++#define VMAC_RDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000022C))
++#define VMAC_RDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000230))
++#define VMAC_RDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000234))
++#define VMAC_RDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000238))
++#define VMAC_RDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000023C))
++#define VMAC_FBLADDCNT(X) (*(volatile unsigned int *)(X + 0x00000240))
++#define VMAC_FBLADDSTART(X) (*(volatile unsigned int *)(X + 0x00000244))
++#define VMAC_FBLADDEND(X) (*(volatile unsigned int *)(X + 0x00000248))
++#define VMAC_RXONOFF(X) (*(volatile unsigned int *)(X + 0x0000024C))
++
++#define VMAC_FBL0NEXTD(X) (*(volatile unsigned int *)(X + 0x00000280))
++#define VMAC_FBL0LASTD(X) (*(volatile unsigned int *)(X + 0x00000284))
++#define VMAC_FBL0COUNTD(X) (*(volatile unsigned int *)(X + 0x00000288))
++#define VMAC_FBL0BUFSIZE(X) (*(volatile unsigned int *)(X + 0x0000028C))
++
++#define VMAC_MACCONTROL(X) (*(volatile unsigned int *)(X + 0x00000300))
++#define VMAC_MACSTATUS(X) (*(volatile unsigned int *)(X + 0x00000304))
++#define VMAC_MACADDRHI(X) (*(volatile unsigned int *)(X + 0x00000308))
++#define VMAC_MACADDRLO(X) (*(volatile unsigned int *)(X + 0x0000030C))
++#define VMAC_MACHASH1(X) (*(volatile unsigned int *)(X + 0x00000310))
++#define VMAC_MACHASH2(X) (*(volatile unsigned int *)(X + 0x00000314))
++
++#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_BOFTEST(X) (*(volatile unsigned int *)(X + 0x00000344))
++#define VMAC_PACTEST(X) (*(volatile unsigned int *)(X + 0x00000348))
++#define VMAC_PAUSEOP(X) (*(volatile unsigned int *)(X + 0x0000034C))
++
++#define VMAC_MDIOCONTROL(X) (*(volatile unsigned int *)(X + 0x00000380))
++#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
++#define VMAC_MDIOACK(X) (*(volatile unsigned int *)(X + 0x00000388))
++#define VMAC_MDIOLINK(X) (*(volatile unsigned int *)(X + 0x0000038C))
++#define VMAC_MDIOMACPHY(X) (*(volatile unsigned int *)(X + 0x00000390))
++
++#define VMAC_STATS_BASE(X) (X + 0x00000400)
++
++#endif
++
++
++
++
++
++
+diff -urN linux-2.4.30/include/asm-mips/ar7/tnetd73xx.h linux-2.4.30.current/include/asm-mips/ar7/tnetd73xx.h
+--- linux-2.4.30/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/tnetd73xx.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,340 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Common Header File
++ ******************************************************************************
++ * FILE NAME: tnetd73xx.h
++ *
++ * DESCRIPTION: shared typedef's, constants and API for TNETD73xx
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++/*
++ *
++ *
++ * These are const, typedef, and api definitions for tnetd73xx.
++ *
++ * NOTES:
++ * 1. This file may be included into both C and Assembly files.
++ * - for .s files, please do #define _ASMLANGUAGE in your ASM file to
++ * avoid C data types (typedefs) below;
++ * - for .c files, you don't have to do anything special.
++ *
++ * 2. This file has a number of sections for each SOC subsystem. When adding
++ * a new constant, find the subsystem you are working on and follow the
++ * name pattern. If you are adding another typedef for your interface, please,
++ * place it with other typedefs and function prototypes.
++ *
++ * 3. Please, DO NOT add any macros or types that are local to a subsystem to avoid
++ * cluttering. Include such items directly into the module's .c file or have a
++ * local .h file to pass data between smaller modules. This file defines only
++ * shared items.
++ */
++
++#ifndef __TNETD73XX_H__
++#define __TNETD73XX_H__
++
++#ifndef _ASMLANGUAGE /* This part not for assembly language */
++
++#include <linux/types.h>
++
++extern unsigned int tnetd73xx_mips_freq;
++extern unsigned int tnetd73xx_vbus_freq;
++
++#include "tnetd73xx_err.h"
++
++#endif /* _ASMLANGUAGE */
++
++
++/*******************************************************************************************
++* Emerald core specific
++******************************************************************************************** */
++
++#ifdef BIG_ENDIAN
++#elif defined(LITTLE_ENDIAN)
++#else
++#error Need to define endianism
++#endif
++
++#ifndef KSEG_MSK
++#define KSEG_MSK 0xE0000000 /* Most significant 3 bits denote kseg choice */
++#endif
++
++#ifndef KSEG_INV_MASK
++#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
++#endif
++
++#ifndef KSEG0_BASE
++#define KSEG0_BASE 0x80000000
++#endif
++
++#ifndef KSEG1_BASE
++#define KSEG1_BASE 0xA0000000
++#endif
++
++#ifndef KSEG0
++#define KSEG0(addr) (((u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
++#endif
++
++#ifndef KSEG1
++#define KSEG1(addr) (((u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
++#endif
++
++#ifndef KUSEG
++#define KUSEG(addr) ((u32)(addr) & ~KSEG_MSK)
++#endif
++
++#ifndef PHYS_ADDR
++#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
++#endif
++
++#ifndef PHYS_TO_K0
++#define PHYS_TO_K0(addr) (PHYS_ADDR(addr)|KSEG0_BASE)
++#endif
++
++#ifndef PHYS_TO_K1
++#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
++#endif
++
++#ifndef REG8_ADDR
++#define REG8_ADDR(addr) (volatile u8 *)(PHYS_TO_K1(addr))
++#define REG8_DATA(addr) (*(volatile u8 *)(PHYS_TO_K1(addr)))
++#define REG8_WRITE(addr, data) REG8_DATA(addr) = data;
++#define REG8_READ(addr, data) data = (u8) REG8_DATA(addr);
++#endif
++
++#ifndef REG16_ADDR
++#define REG16_ADDR(addr) (volatile u16 *)(PHYS_TO_K1(addr))
++#define REG16_DATA(addr) (*(volatile u16 *)(PHYS_TO_K1(addr)))
++#define REG16_WRITE(addr, data) REG16_DATA(addr) = data;
++#define REG16_READ(addr, data) data = (u16) REG16_DATA(addr);
++#endif
++
++#ifndef REG32_ADDR
++#define REG32_ADDR(addr) (volatile u32 *)(PHYS_TO_K1(addr))
++#define REG32_DATA(addr) (*(volatile u32 *)(PHYS_TO_K1(addr)))
++#define REG32_WRITE(addr, data) REG32_DATA(addr) = data;
++#define REG32_READ(addr, data) data = (u32) REG32_DATA(addr);
++#endif
++
++#ifdef _LINK_KSEG0_ /* Application is linked into KSEG0 space */
++#define VIRT_ADDR(addr) PHYS_TO_K0(PHYS_ADDR(addr))
++#endif
++
++#ifdef _LINK_KSEG1_ /* Application is linked into KSEG1 space */
++#define VIRT_ADDR(addr) PHYS_TO_K1(PHYS_ADDR(addr))
++#endif
++
++#if !defined(_LINK_KSEG0_) && !defined(_LINK_KSEG1_)
++#error You must define _LINK_KSEG0_ or _LINK_KSEG1_ to compile the code.
++#endif
++
++/* TNETD73XX chip definations */
++
++#define FREQ_1MHZ 1000000
++#define TNETD73XX_MIPS_FREQ tnetd73xx_mips_freq /* CPU clock frequency */
++#define TNETD73XX_VBUS_FREQ tnetd73xx_vbus_freq /* originally (TNETD73XX_MIPS_FREQ/2) */
++
++#ifdef AR7SEAD2
++#define TNETD73XX_MIPS_FREQ_DEFAULT 25000000 /* 25 Mhz for sead2 board crystal */
++#else
++#define TNETD73XX_MIPS_FREQ_DEFAULT 125000000 /* 125 Mhz */
++#endif
++#define TNETD73XX_VBUS_FREQ_DEFAULT (TNETD73XX_MIPS_FREQ_DEFAULT / 2) /* Sync mode */
++
++
++
++/* Module base addresses */
++#define TNETD73XX_ADSLSS_BASE PHYS_TO_K1(0x01000000) /* ADSLSS Module */
++#define TNETD73XX_BBIF_CTRL_BASE PHYS_TO_K1(0x02000000) /* BBIF Control */
++#define TNETD73XX_ATMSAR_BASE PHYS_TO_K1(0x03000000) /* ATM SAR */
++#define TNETD73XX_USB_BASE PHYS_TO_K1(0x03400000) /* USB Module */
++#define TNETD73XX_VLYNQ0_BASE PHYS_TO_K1(0x04000000) /* VLYNQ0 Module */
++#define TNETD73xx_EMAC0_BASE PHYS_TO_K1(0x08610000) /* EMAC0 Module*/
++#define TNETD73XX_EMIF_BASE PHYS_TO_K1(0x08610800) /* EMIF Module */
++#define TNETD73XX_GPIO_BASE PHYS_TO_K1(0x08610900) /* GPIO control */
++#define TNETD73XX_CLOCK_CTRL_BASE PHYS_TO_K1(0x08610A00) /* Clock Control */
++#define TNETD73XX_WDTIMER_BASE PHYS_TO_K1(0x08610B00) /* WDTIMER Module */
++#define TNETD73XX_TIMER0_BASE PHYS_TO_K1(0x08610C00) /* TIMER0 Module */
++#define TNETD73XX_TIMER1_BASE PHYS_TO_K1(0x08610D00) /* TIMER1 Module */
++#define TNETD73XX_UARTA_BASE PHYS_TO_K1(0x08610E00) /* UART A */
++#define TNETD73XX_UARTB_BASE PHYS_TO_K1(0x08610F00) /* UART B */
++#define TNETD73XX_I2C_BASE PHYS_TO_K1(0x08611000) /* I2C Module */
++#define TNETD73XX_USB_DMA_BASE PHYS_TO_K1(0x08611200) /* USB Module */
++#define TNETD73XX_MCDMA_BASE PHYS_TO_K1(0x08611400) /* MC-DMA */
++#define TNETD73xx_VDMAVT_BASE PHYS_TO_K1(0x08611500) /* VDMAVT Control */
++#define TNETD73XX_RST_CTRL_BASE PHYS_TO_K1(0x08611600) /* Reset Control */
++#define TNETD73xx_BIST_CTRL_BASE PHYS_TO_K1(0x08611700) /* BIST Control */
++#define TNETD73xx_VLYNQ0_CTRL_BASE PHYS_TO_K1(0x08611800) /* VLYNQ0 Control */
++#define TNETD73XX_DCL_BASE PHYS_TO_K1(0x08611A00) /* Device Configuration Latch */
++#define TNETD73xx_VLYNQ1_CTRL_BASE PHYS_TO_K1(0x08611C00) /* VLYNQ1 Control */
++#define TNETD73xx_MDIO_BASE PHYS_TO_K1(0x08611E00) /* MDIO Control */
++#define TNETD73XX_FSER_BASE PHYS_TO_K1(0x08612000) /* FSER Control */
++#define TNETD73XX_INTC_BASE PHYS_TO_K1(0x08612400) /* Interrupt Controller */
++#define TNETD73xx_EMAC1_BASE PHYS_TO_K1(0x08612800) /* EMAC1 Module*/
++#define TNETD73XX_VLYNQ1_BASE PHYS_TO_K1(0x0C000000) /* VLYNQ1 Module */
++
++/* BBIF Registers */
++#define TNETD73XX_BBIF_ADSLADR (TNETD73XX_BBIF_CTRL_BASE + 0x0)
++
++/* Device Configuration Latch Registers */
++#define TNETD73XX_DCL_BOOTCR (TNETD73XX_DCL_BASE + 0x0)
++#define TNETD73XX_DCL_DPLLSELR (TNETD73XX_DCL_BASE + 0x10)
++#define TNETD73XX_DCL_SPEEDCTLR (TNETD73XX_DCL_BASE + 0x14)
++#define TNETD73XX_DCL_SPEEDPWDR (TNETD73XX_DCL_BASE + 0x18)
++#define TNETD73XX_DCL_SPEEDCAPR (TNETD73XX_DCL_BASE + 0x1C)
++
++/* GPIO Control */
++#define TNETD73XX_GPIODINR (TNETD73XX_GPIO_BASE + 0x0)
++#define TNETD73XX_GPIODOUTR (TNETD73XX_GPIO_BASE + 0x4)
++#define TNETD73XX_GPIOPDIRR (TNETD73XX_GPIO_BASE + 0x8)
++#define TNETD73XX_GPIOENR (TNETD73XX_GPIO_BASE + 0xC)
++#define TNETD73XX_CVR (TNETD73XX_GPIO_BASE + 0x14)
++#define TNETD73XX_DIDR1 (TNETD73XX_GPIO_BASE + 0x18)
++#define TNETD73XX_DIDR2 (TNETD73XX_GPIO_BASE + 0x1C)
++
++/* Reset Control */
++#define TNETD73XX_RST_CTRL_PRCR (TNETD73XX_RST_CTRL_BASE + 0x0)
++#define TNETD73XX_RST_CTRL_SWRCR (TNETD73XX_RST_CTRL_BASE + 0x4)
++#define TNETD73XX_RST_CTRL_RSR (TNETD73XX_RST_CTRL_BASE + 0x8)
++
++/* Power Control */
++#define TNETD73XX_POWER_CTRL_PDCR (TNETD73XX_CLOCK_CTRL_BASE + 0x0)
++#define TNETD73XX_POWER_CTRL_PCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x4)
++#define TNETD73XX_POWER_CTRL_PDUCR (TNETD73XX_CLOCK_CTRL_BASE + 0x8)
++#define TNETD73XX_POWER_CTRL_WKCR (TNETD73XX_CLOCK_CTRL_BASE + 0xC)
++
++/* Clock Control */
++#define TNETD73XX_CLK_CTRL_SCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x20)
++#define TNETD73XX_CLK_CTRL_SCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x30)
++#define TNETD73XX_CLK_CTRL_MCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x40)
++#define TNETD73XX_CLK_CTRL_MCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x50)
++#define TNETD73XX_CLK_CTRL_UCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x60)
++#define TNETD73XX_CLK_CTRL_UCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x70)
++#define TNETD73XX_CLK_CTRL_ACLKCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x80)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x90)
++#define TNETD73XX_CLK_CTRL_ACLKCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xA0)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xB0)
++
++/* EMIF control */
++#define TNETD73XX_EMIF_SDRAM_CFG ( TNETD73XX_EMIF_BASE + 0x08 )
++
++/* UART */
++#ifdef AR7SEAD2
++#define TNETD73XX_UART_FREQ 3686400
++#else
++#define TNETD73XX_UART_FREQ TNETD73XX_VBUS_FREQ
++#endif
++
++/* Interrupt Controller */
++
++/* Primary interrupts */
++#define TNETD73XX_INTC_UNIFIED_SECONDARY 0 /* Unified secondary interrupt */
++#define TNETD73XX_INTC_EXTERNAL0 1 /* External Interrupt Line 0 */
++#define TNETD73XX_INTC_EXTERNAL1 2 /* External Interrupt Line 1 */
++#define TNETD73XX_INTC_RESERVED3 3 /* Reserved */
++#define TNETD73XX_INTC_RESERVED4 4 /* Reserved */
++#define TNETD73XX_INTC_TIMER0 5 /* TIMER 0 int */
++#define TNETD73XX_INTC_TIMER1 6 /* TIMER 1 int */
++#define TNETD73XX_INTC_UART0 7 /* UART 0 int */
++#define TNETD73XX_INTC_UART1 8 /* UART 1 int */
++#define TNETD73XX_INTC_MCDMA0 9 /* MCDMA 0 int */
++#define TNETD73XX_INTC_MCDMA1 10 /* MCDMA 1 int */
++#define TNETD73XX_INTC_RESERVED11 11 /* Reserved */
++#define TNETD73XX_INTC_RESERVED12 12 /* Reserved */
++#define TNETD73XX_INTC_RESERVED13 13 /* Reserved */
++#define TNETD73XX_INTC_RESERVED14 14 /* Reserved */
++#define TNETD73XX_INTC_ATMSAR 15 /* ATM SAR int */
++#define TNETD73XX_INTC_RESERVED16 16 /* Reserved */
++#define TNETD73XX_INTC_RESERVED17 17 /* Reserved */
++#define TNETD73XX_INTC_RESERVED18 18 /* Reserved */
++#define TNETD73XX_INTC_EMAC0 19 /* EMAC 0 int */
++#define TNETD73XX_INTC_RESERVED20 20 /* Reserved */
++#define TNETD73XX_INTC_VLYNQ0 21 /* VLYNQ 0 int */
++#define TNETD73XX_INTC_CODEC 22 /* CODEC int */
++#define TNETD73XX_INTC_RESERVED23 23 /* Reserved */
++#define TNETD73XX_INTC_USBSLAVE 24 /* USB Slave int */
++#define TNETD73XX_INTC_VLYNQ1 25 /* VLYNQ 1 int */
++#define TNETD73XX_INTC_RESERVED26 26 /* Reserved */
++#define TNETD73XX_INTC_RESERVED27 27 /* Reserved */
++#define TNETD73XX_INTC_ETH_PHY 28 /* Ethernet PHY */
++#define TNETD73XX_INTC_I2C 29 /* I2C int */
++#define TNETD73XX_INTC_MCDMA2 30 /* MCDMA 2 int */
++#define TNETD73XX_INTC_MCDMA3 31 /* MCDMA 3 int */
++#define TNETD73XX_INTC_RESERVED32 32 /* Reserved */
++#define TNETD73XX_INTC_EMAC1 33 /* EMAC 1 int */
++#define TNETD73XX_INTC_RESERVED34 34 /* Reserved */
++#define TNETD73XX_INTC_RESERVED35 35 /* Reserved */
++#define TNETD73XX_INTC_RESERVED36 36 /* Reserved */
++#define TNETD73XX_INTC_VDMAVTRX 37 /* VDMAVTRX */
++#define TNETD73XX_INTC_VDMAVTTX 38 /* VDMAVTTX */
++#define TNETD73XX_INTC_ADSLSS 39 /* ADSLSS */
++
++/* Secondary interrupts */
++#define TNETD73XX_INTC_SEC0 40 /* Secondary */
++#define TNETD73XX_INTC_SEC1 41 /* Secondary */
++#define TNETD73XX_INTC_SEC2 42 /* Secondary */
++#define TNETD73XX_INTC_SEC3 43 /* Secondary */
++#define TNETD73XX_INTC_SEC4 44 /* Secondary */
++#define TNETD73XX_INTC_SEC5 45 /* Secondary */
++#define TNETD73XX_INTC_SEC6 46 /* Secondary */
++#define TNETD73XX_INTC_EMIF 47 /* EMIF */
++#define TNETD73XX_INTC_SEC8 48 /* Secondary */
++#define TNETD73XX_INTC_SEC9 49 /* Secondary */
++#define TNETD73XX_INTC_SEC10 50 /* Secondary */
++#define TNETD73XX_INTC_SEC11 51 /* Secondary */
++#define TNETD73XX_INTC_SEC12 52 /* Secondary */
++#define TNETD73XX_INTC_SEC13 53 /* Secondary */
++#define TNETD73XX_INTC_SEC14 54 /* Secondary */
++#define TNETD73XX_INTC_SEC15 55 /* Secondary */
++#define TNETD73XX_INTC_SEC16 56 /* Secondary */
++#define TNETD73XX_INTC_SEC17 57 /* Secondary */
++#define TNETD73XX_INTC_SEC18 58 /* Secondary */
++#define TNETD73XX_INTC_SEC19 59 /* Secondary */
++#define TNETD73XX_INTC_SEC20 60 /* Secondary */
++#define TNETD73XX_INTC_SEC21 61 /* Secondary */
++#define TNETD73XX_INTC_SEC22 62 /* Secondary */
++#define TNETD73XX_INTC_SEC23 63 /* Secondary */
++#define TNETD73XX_INTC_SEC24 64 /* Secondary */
++#define TNETD73XX_INTC_SEC25 65 /* Secondary */
++#define TNETD73XX_INTC_SEC26 66 /* Secondary */
++#define TNETD73XX_INTC_SEC27 67 /* Secondary */
++#define TNETD73XX_INTC_SEC28 68 /* Secondary */
++#define TNETD73XX_INTC_SEC29 69 /* Secondary */
++#define TNETD73XX_INTC_SEC30 70 /* Secondary */
++#define TNETD73XX_INTC_SEC31 71 /* Secondary */
++
++/* These ugly macros are to access the -1 registers, like config1 */
++#define MFC0_SEL1_OPCODE(dst, src)\
++ .word (0x40000000 | ((dst)<<16) | ((src)<<11) | 1);\
++ nop; \
++ nop; \
++ nop
++
++#define MTC0_SEL1_OPCODE(dst, src)\
++ .word (0x40800000 | ((dst)<<16) | ((src)<<11) | 1);\
++ nop; \
++ nop; \
++ nop
++
++
++/* Below are Jade core specific */
++#define CFG0_4K_IL_MASK 0x00380000
++#define CFG0_4K_IL_SHIFT 19
++#define CFG0_4K_IA_MASK 0x00070000
++#define CFG0_4K_IA_SHIFT 16
++#define CFG0_4K_IS_MASK 0x01c00000
++#define CFG0_4K_IS_SHIFT 22
++
++#define CFG0_4K_DL_MASK 0x00001c00
++#define CFG0_4K_DL_SHIFT 10
++#define CFG0_4K_DA_MASK 0x00000380
++#define CFG0_4K_DA_SHIFT 7
++#define CFG0_4K_DS_MASK 0x0000E000
++#define CFG0_4K_DS_SHIFT 13
++
++
++
++#endif /* __TNETD73XX_H_ */
+diff -urN linux-2.4.30/include/asm-mips/ar7/tnetd73xx_err.h linux-2.4.30.current/include/asm-mips/ar7/tnetd73xx_err.h
+--- linux-2.4.30/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/tnetd73xx_err.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,42 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Error Definations Header File
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_err.h
++ *
++ * DESCRIPTION: Error definations for TNETD73XX
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++
++#ifndef __TNETD73XX_ERR_H__
++#define __TNETD73XX_ERR_H__
++
++typedef enum TNETD73XX_ERR_t
++{
++ TNETD73XX_ERR_OK = 0, /* OK or SUCCESS */
++ TNETD73XX_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
++
++ /* Pointers and args */
++ TNETD73XX_ERR_INVARG = -2, /* Invaild argument to the call */
++ TNETD73XX_ERR_NULLPTR = -3, /* NULL pointer */
++ TNETD73XX_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
++
++ /* Memory issues */
++ TNETD73XX_ERR_ALLOC_FAIL = -10, /* allocation failed */
++ TNETD73XX_ERR_FREE_FAIL = -11, /* free failed */
++ TNETD73XX_ERR_MEM_CORRUPT = -12, /* corrupted memory */
++ TNETD73XX_ERR_BUF_LINK = -13, /* buffer linking failed */
++
++ /* Device issues */
++ TNETD73XX_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
++ TNETD73XX_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
++
++ TNETD73XX_ERR_INVID = -30 /* Invalid ID */
++
++} TNETD73XX_ERR;
++
++#endif /* __TNETD73XX_ERR_H__ */
+diff -urN linux-2.4.30/include/asm-mips/ar7/tnetd73xx_misc.h linux-2.4.30.current/include/asm-mips/ar7/tnetd73xx_misc.h
+--- linux-2.4.30/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/ar7/tnetd73xx_misc.h 2005-06-12 20:14:28.000000000 +0200
+@@ -0,0 +1,243 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Misc modules API Header
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_misc.h
++ *
++ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO
++ * FSER Modules API
++ * As per TNETD73xx specifications
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - Sharath Kumar PSP TII
++ * 14 Feb 03 - Anant Gole PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++#ifndef __TNETD73XX_MISC_H__
++#define __TNETD73XX_MISC_H__
++
++#include <linux/types.h>
++
++#define BOOTCR_MIPS_ASYNC_MODE (1 << 25)
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++typedef enum TNETD73XX_RESET_MODULE_tag
++{
++ RESET_MODULE_UART0 = 0,
++ RESET_MODULE_UART1 = 1,
++ RESET_MODULE_I2C = 2,
++ RESET_MODULE_TIMER0 = 3,
++ RESET_MODULE_TIMER1 = 4,
++ RESET_MODULE_GPIO = 6,
++ RESET_MODULE_ADSLSS = 7,
++ RESET_MODULE_USBS = 8,
++ RESET_MODULE_SAR = 9,
++ RESET_MODULE_VDMA_VT = 11,
++ RESET_MODULE_FSER = 12,
++ RESET_MODULE_VLYNQ1 = 16,
++ RESET_MODULE_EMAC0 = 17,
++ RESET_MODULE_DMA = 18,
++ RESET_MODULE_BIST = 19,
++ RESET_MODULE_VLYNQ0 = 20,
++ RESET_MODULE_EMAC1 = 21,
++ RESET_MODULE_MDIO = 22,
++ RESET_MODULE_ADSLSS_DSP = 23,
++ RESET_MODULE_EPHY = 26
++} TNETD73XX_RESET_MODULE_T;
++
++typedef enum TNETD73XX_RESET_CTRL_tag
++{
++ IN_RESET = 0,
++ OUT_OF_RESET
++} TNETD73XX_RESET_CTRL_T;
++
++typedef enum TNETD73XX_SYS_RST_MODE_tag
++{
++ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
++ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RST_MODE_T;
++
++typedef enum TNETD73XX_SYS_RESET_STATUS_tag
++{
++ HARDWARE_RESET = 0,
++ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
++ WATCHDOG_RESET,
++ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RESET_STATUS_T;
++
++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module,
++ TNETD73XX_RESET_CTRL_T reset_ctrl);
++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status(TNETD73XX_RESET_MODULE_T reset_module);
++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode);
++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status(void);
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum TNETD73XX_POWER_MODULE_tag
++{
++ POWER_MODULE_USBSP = 0,
++ POWER_MODULE_WDTP = 1,
++ POWER_MODULE_UT0P = 2,
++ POWER_MODULE_UT1P = 3,
++ POWER_MODULE_IICP = 4,
++ POWER_MODULE_VDMAP = 5,
++ POWER_MODULE_GPIOP = 6,
++ POWER_MODULE_VLYNQ1P = 7,
++ POWER_MODULE_SARP = 8,
++ POWER_MODULE_ADSLP = 9,
++ POWER_MODULE_EMIFP = 10,
++ POWER_MODULE_ADSPP = 12,
++ POWER_MODULE_RAMP = 13,
++ POWER_MODULE_ROMP = 14,
++ POWER_MODULE_DMAP = 15,
++ POWER_MODULE_BISTP = 16,
++ POWER_MODULE_TIMER0P = 18,
++ POWER_MODULE_TIMER1P = 19,
++ POWER_MODULE_EMAC0P = 20,
++ POWER_MODULE_EMAC1P = 22,
++ POWER_MODULE_EPHYP = 24,
++ POWER_MODULE_VLYNQ0P = 27,
++} TNETD73XX_POWER_MODULE_T;
++
++typedef enum TNETD73XX_POWER_CTRL_tag
++{
++ POWER_CTRL_POWER_UP = 0,
++ POWER_CTRL_POWER_DOWN
++} TNETD73XX_POWER_CTRL_T;
++
++typedef enum TNETD73XX_SYS_POWER_MODE_tag
++{
++ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
++ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
++ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
++ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
++} TNETD73XX_SYS_POWER_MODE_T;
++
++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl);
++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module);
++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode);
++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++typedef enum TNETD73XX_WAKEUP_INTERRUPT_tag
++{
++ WAKEUP_INT0 = 1,
++ WAKEUP_INT1 = 2,
++ WAKEUP_INT2 = 4,
++ WAKEUP_INT3 = 8
++} TNETD73XX_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETD73XX_WAKEUP_CTRL_tag
++{
++ WAKEUP_DISABLED = 0,
++ WAKEUP_ENABLED
++} TNETD73XX_WAKEUP_CTRL_T;
++
++typedef enum TNETD73XX_WAKEUP_POLARITY_tag
++{
++ WAKEUP_ACTIVE_HIGH = 0,
++ WAKEUP_ACTIVE_LOW
++} TNETD73XX_WAKEUP_POLARITY_T;
++
++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
++ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
++ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * FSER Control
++ *****************************************************************************/
++
++typedef enum TNETD73XX_FSER_MODE_tag
++{
++ FSER_I2C = 0,
++ FSER_UART = 1
++} TNETD73XX_FSER_MODE_T;
++
++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode);
++
++/*****************************************************************************
++ * Clock Control
++ *****************************************************************************/
++
++#define CLK_MHZ(x) ( (x) * 1000000 )
++
++typedef enum TNETD73XX_CLKC_ID_tag
++{
++ CLKC_SYS = 0,
++ CLKC_MIPS,
++ CLKC_USB,
++ CLKC_ADSLSS
++} TNETD73XX_CLKC_ID_T;
++
++void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in);
++TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, u32 output_freq);
++u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++typedef enum TNETD73XX_GPIO_PIN_tag
++{
++ GPIO_UART0_RD = 0,
++ GPIO_UART0_TD = 1,
++ GPIO_UART0_RTS = 2,
++ GPIO_UART0_CTS = 3,
++ GPIO_FSER_CLK = 4,
++ GPIO_FSER_D = 5,
++ GPIO_EXT_AFE_SCLK = 6,
++ GPIO_EXT_AFE_TX_FS = 7,
++ GPIO_EXT_AFE_TXD = 8,
++ GPIO_EXT_AFE_RS_FS = 9,
++ GPIO_EXT_AFE_RXD1 = 10,
++ GPIO_EXT_AFE_RXD0 = 11,
++ GPIO_EXT_AFE_CDIN = 12,
++ GPIO_EXT_AFE_CDOUT = 13,
++ GPIO_EPHY_SPEED100 = 14,
++ GPIO_EPHY_LINKON = 15,
++ GPIO_EPHY_ACTIVITY = 16,
++ GPIO_EPHY_FDUPLEX = 17,
++ GPIO_EINT0 = 18,
++ GPIO_EINT1 = 19,
++ GPIO_MBSP0_TCLK = 20,
++ GPIO_MBSP0_RCLK = 21,
++ GPIO_MBSP0_RD = 22,
++ GPIO_MBSP0_TD = 23,
++ GPIO_MBSP0_RFS = 24,
++ GPIO_MBSP0_TFS = 25,
++ GPIO_MII_DIO = 26,
++ GPIO_MII_DCLK = 27,
++} TNETD73XX_GPIO_PIN_T;
++
++typedef enum TNETD73XX_GPIO_PIN_MODE_tag
++{
++ FUNCTIONAL_PIN = 0,
++ GPIO_PIN = 1
++} TNETD73XX_GPIO_PIN_MODE_T;
++
++typedef enum TNETD73XX_GPIO_PIN_DIRECTION_tag
++{
++ GPIO_OUTPUT_PIN = 0,
++ GPIO_INPUT_PIN = 1
++} TNETD73XX_GPIO_PIN_DIRECTION_T;
++
++void tnetd73xx_gpio_init(void);
++void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin,
++ TNETD73XX_GPIO_PIN_MODE_T pin_mode,
++ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction);
++void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value);
++int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin);
++
++/* TNETD73XX Revision */
++u32 tnetd73xx_get_revision(void);
++
++#endif /* __TNETD73XX_MISC_H__ */
+diff -urN linux-2.4.30/include/asm-mips/io.h linux-2.4.30.current/include/asm-mips/io.h
+--- linux-2.4.30/include/asm-mips/io.h 2003-08-25 13:44:43.000000000 +0200
++++ linux-2.4.30.current/include/asm-mips/io.h 2005-06-12 20:14:28.000000000 +0200
+@@ -63,8 +63,12 @@
+ #ifdef CONFIG_64BIT_PHYS_ADDR
+ #define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT)
+ #else
++#ifdef CONFIG_AR7_PAGING
++#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + CONFIG_AR7_MEMORY)
++#else
+ #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+ #endif
++#endif
+
+ #define IO_SPACE_LIMIT 0xffff
+
+diff -urN linux-2.4.30/include/asm-mips/irq.h linux-2.4.30.current/include/asm-mips/irq.h
+--- linux-2.4.30/include/asm-mips/irq.h 2003-08-25 13:44:43.000000000 +0200
++++ linux-2.4.30.current/include/asm-mips/irq.h 2005-06-12 20:14:28.000000000 +0200
+@@ -14,7 +14,12 @@
+ #include <linux/config.h>
+ #include <linux/linkage.h>
+
++#ifdef CONFIG_AR7
++#include <asm/ar7/avalanche_intc.h>
++#define NR_IRQS AVALANCHE_INT_END + 1
++#else
+ #define NR_IRQS 128 /* Largest number of ints of all machines. */
++#endif
+
+ #ifdef CONFIG_I8259
+ static inline int irq_cannonicalize(int irq)
+diff -urN linux-2.4.30/include/asm-mips/page.h linux-2.4.30.current/include/asm-mips/page.h
+--- linux-2.4.30/include/asm-mips/page.h 2004-02-18 14:36:32.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/page.h 2005-06-12 20:14:28.000000000 +0200
+@@ -129,7 +129,11 @@
+
+ #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
+ #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
++#ifdef CONFIG_AR7_PAGING
++#define virt_to_page(kaddr) phys_to_page(__pa(kaddr))
++#else
+ #define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT))
++#endif
+ #define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
+
+ #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+diff -urN linux-2.4.30/include/asm-mips/pgtable-32.h linux-2.4.30.current/include/asm-mips/pgtable-32.h
+--- linux-2.4.30/include/asm-mips/pgtable-32.h 2004-02-18 14:36:32.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/pgtable-32.h 2005-06-12 20:14:28.000000000 +0200
+@@ -108,7 +108,18 @@
+ * and a page entry and page directory to the page they refer to.
+ */
+
+-#ifdef CONFIG_CPU_VR41XX
++#if defined(CONFIG_AR7_PAGING)
++#define mk_pte(page, pgprot) \
++({ \
++ pte_t __pte; \
++ \
++ pte_val(__pte) = ((phys_t)(page - mem_map) << (PAGE_SHIFT) | \
++ CONFIG_AR7_MEMORY) | \
++ pgprot_val(pgprot); \
++ \
++ __pte; \
++})
++#elif defined(CONFIG_CPU_VR41XX)
+ #define mk_pte(page, pgprot) \
+ ({ \
+ pte_t __pte; \
+@@ -130,6 +141,7 @@
+ })
+ #endif
+
++
+ static inline pte_t mk_pte_phys(phys_t physpage, pgprot_t pgprot)
+ {
+ #ifdef CONFIG_CPU_VR41XX
+@@ -175,7 +187,10 @@
+ set_pte(ptep, __pte(0));
+ }
+
+-#ifdef CONFIG_CPU_VR41XX
++#if defined(CONFIG_AR7_PAGING)
++#define phys_to_page(phys) (mem_map + (((phys)-CONFIG_AR7_MEMORY) >> PAGE_SHIFT))
++#define pte_page(x) phys_to_page(pte_val(x))
++#elif defined(CONFIG_CPU_VR41XX)
+ #define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> (PAGE_SHIFT+2)))))
+ #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot))
+ #else
+diff -urN linux-2.4.30/include/asm-mips/serial.h linux-2.4.30.current/include/asm-mips/serial.h
+--- linux-2.4.30/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100
++++ linux-2.4.30.current/include/asm-mips/serial.h 2005-06-12 20:14:28.000000000 +0200
+@@ -65,6 +65,15 @@
+
+ #define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
++#ifdef CONFIG_AR7
++#include <asm/ar7/ar7.h>
++#define AR7_SERIAL_PORT_DEFNS \
++ { 0, AVALANCHE_BASE_BAUD, AVALANCHE_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \
++ { 0, AVALANCHE_BASE_BAUD, AVALANCHE_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS },
++#else
++#define AR7_SERIAL_PORT_DEFNS
++#endif
++
+ #ifdef CONFIG_MIPS_JAZZ
+ #define _JAZZ_SERIAL_INIT(int, base) \
+ { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
+@@ -468,6 +477,7 @@
+ #endif
+
+ #define SERIAL_PORT_DFNS \
++ AR7_SERIAL_PORT_DEFNS \
+ ATLAS_SERIAL_PORT_DEFNS \
+ AU1000_SERIAL_PORT_DEFNS \
+ COBALT_SERIAL_PORT_DEFNS \