diff options
Diffstat (limited to 'target/linux/lantiq/image/EASY80920.dtsi')
| -rw-r--r-- | target/linux/lantiq/image/EASY80920.dtsi | 129 |
1 files changed, 79 insertions, 50 deletions
diff --git a/target/linux/lantiq/image/EASY80920.dtsi b/target/linux/lantiq/image/EASY80920.dtsi index 332df3d14..660f3cfdf 100644 --- a/target/linux/lantiq/image/EASY80920.dtsi +++ b/target/linux/lantiq/image/EASY80920.dtsi @@ -23,25 +23,50 @@ }; - sflash@E100800 { - compatible = "lantiq,sflash"; + spi@E100800 { + compatible = "lantiq,spi-xway-broken"; reg = <0xE100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <22 23 24>; #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x10000>; - }; - partition@10000 { - label = "uboot_env"; - reg = <0x10000 0x10000>; - }; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fl129p0"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <1000000>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; - partition@20000 { - label = "linux"; - reg = <0x20000 0x1d0000>; + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; }; }; @@ -58,14 +83,18 @@ reg = <0xE100B10 0xA0>; state_default: pinmux { + exin3 { + lantiq,groups = "exin3"; + lantiq,function = "exin"; + }; stp { lantiq,groups = "stp"; lantiq,function = "stp"; }; - /*spi { + spi { lantiq,groups = "spi", "spi_cs4"; lantiq,function = "spi"; - };*/ + }; nand { lantiq,groups = "nand cle", "nand ale", "nand rd", "nand rdy"; @@ -79,18 +108,19 @@ lantiq,groups = "gnt1", "req1"; lantiq,function = "pci"; }; - exin { - lantiq,groups = "exin3"; - lantiq,function = "exin"; - }; conf_out { lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */ "io4", "io5", "io6", /* stp */ - "io17", "io18", /* spi dout & clk */ - "io21", /* pci-rst */ - "io38"; /* pcie-rst */ + "io21", + "io33"; lantiq,open-drain; lantiq,pull = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; }; conf_in { lantiq,pins = "io39", /* exin3 */ @@ -100,7 +130,7 @@ }; }; - eth@0xE108000 { + eth@E108000 { #address-cells = <1>; #size-cells = <0>; compatible = "lantiq,xrx200-net"; @@ -137,12 +167,6 @@ phy-mode = "gmii"; phy-handle = <&phy11>; }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phynmode0 = "gmii"; - phy-handle = <&phy13>; - }; }; wan: interface@1 { @@ -151,7 +175,7 @@ #size-cells = <0>; reg = <1>; mac-address = [ 00 11 22 33 44 56 ]; - + lantiq,wan; ethernet@5 { compatible = "lantiq,xrx200-pdi-port"; reg = <5>; @@ -160,6 +184,20 @@ }; }; + test: interface@2 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + mac-address = [ 00 11 22 33 44 57 ]; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phynmode0 = "gmii"; + phy-handle = <&phy13>; + }; + }; + mdio@0 { #address-cells = <1>; #size-cells = <0>; @@ -205,7 +243,12 @@ lantiq,phy2 = <0x7>; /* lantiq,rising; */ }; - + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 0>; + }; + pci@E105400 { #address-cells = <3>; #size-cells = <2>; @@ -229,12 +272,6 @@ }; }; - ifxhcd { - compatible = "lantiq,ifxhcd"; - interrupt-parent = <&icu0>; - interrupts = <62 91>; - }; - gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware = "lantiq/vr9_phy11g_a2x.bin"; @@ -248,7 +285,7 @@ poll-interval = <100>; reset { label = "Reset"; - gpios = <&gpio 7 0>; + gpios = <&gpio 7 1>; linux,code = <0x100>; }; paging { @@ -261,7 +298,7 @@ /* gpio-keys { compatible = "gpio-keys"; wps { - gpios = <&gpio 39 0>; + gpios = <&gpio 2 0>; linux,code = <0x100>; }; };*/ @@ -269,50 +306,42 @@ gpio-leds { compatible = "gpio-leds"; - led0 { - label = "led0"; + power { + label = "power"; gpios = <&stp 9 0>; default-state = "on"; }; warning { label = "warning"; gpios = <&stp 22 0>; - default-state = "on"; }; fxs1 { label = "fxs1"; gpios = <&stp 21 0>; - default-state = "on"; }; fxs2 { label = "fxs2"; gpios = <&stp 20 0>; - default-state = "on"; }; fxo { label = "fxo"; gpios = <&stp 19 0>; - default-state = "on"; }; usb1 { label = "usb1"; gpios = <&stp 18 0>; - default-state = "on"; }; usb2 { label = "usb2"; gpios = <&stp 15 0>; - default-state = "on"; }; sd { label = "sd"; gpios = <&stp 14 0>; - default-state = "on"; }; wps { label = "wps"; gpios = <&stp 12 0>; - default-state = "on"; }; }; }; |