diff options
Diffstat (limited to 'target/linux/image/ar7/src/loader.c')
| -rw-r--r-- | target/linux/image/ar7/src/loader.c | 1387 |
1 files changed, 89 insertions, 1298 deletions
diff --git a/target/linux/image/ar7/src/loader.c b/target/linux/image/ar7/src/loader.c index f4f92950e..22b909d7e 100644 --- a/target/linux/image/ar7/src/loader.c +++ b/target/linux/image/ar7/src/loader.c @@ -12,1338 +12,129 @@ * directly from Flash or ROM memory on embeded systems. */ -/* - Inflate deflated (PKZIP's method 8 compressed) data. (compress - with the gzip -3 option which will compress it in a compatible - format). - - The compression method searches for as much of the current string of bytes - (up to a length of 258) in the previous 32 K bytes. If it doesn't find any - matches (of at least length 3), it codes the next byte. Otherwise, it - codes the length of the matched string and its distance backwards from - the current position. There is a single Huffman code that codes both - single bytes (called "literals") and match lengths. A second Huffman - code codes the distance information, which follows a length code. Each - length or distance code actually represents a base value and a number - of "extra" (sometimes zero) bits to get to add to the base value. At - the end of each deflated block is a special end-of-block (EOB) literal/ - length code. The decoding process is basically: get a literal/length - code; if EOB then done; if a literal, emit the decoded byte; if a - length then get the distance and emit the referred-to bytes from the - sliding window of previously emitted data. - - There are (currently) three kinds of inflate blocks: stored, fixed, and - dynamic. The compressor deals with some chunk of data at a time, and - decides which method to use on a chunk-by-chunk basis. A chunk might - typically be 32 K or 64 K. If the chunk is incompressible, then the - "stored" method is used. In this case, the bytes are simply stored as - is, eight bits per byte, with none of the above coding. The bytes are - preceded by a count, since there is no longer an EOB code. - - If the data is compressible, then either the fixed or dynamic methods - are used. In the dynamic method, the compressed data is preceded by - an encoding of the literal/length and distance Huffman codes that are - to be used to decode this block. The representation is itself Huffman - coded, and so is preceded by a description of that code. These code - descriptions take up a little space, and so for small blocks, there is - a predefined set of codes, called the fixed codes. The fixed method is - used if the block codes up smaller that way (usually for quite small - chunks), otherwise the dynamic method is used. In the latter case, the - codes are customized to the probabilities in the current block, and so - can code it much better than the pre-determined fixed codes. - - The Huffman codes themselves are decoded using a multi-level table - lookup, in order to maximize the speed of decoding plus the speed of - building the decoding tables. See the comments below that precede the - lbits and dbits tuning parameters. - */ - - -/* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarly, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. - */ - -#include "gzip.h" #include <linux/config.h> - - - -#ifndef STATIC -#define STATIC -#endif /* !STATIC */ - -#define slide window - -/* Huffman code lookup table entry--this entry is four bytes for machines - that have 16-bit pointers (e.g. PC's in the small or medium model). - Valid extra bits are 0..13. e == 15 is EOB (end of block), e == 16 - means that v is a literal, 16 < e < 32 means that v is a pointer to - the next table, which codes e - 16 bits, and lastly e == 99 indicates - an unused code. If a code with e == 99 is looked up, this implies an - error in the data. */ -struct huft { - uch e; /* number of extra bits or operation */ - uch b; /* number of bits in this code or subcode */ - union { - ush n; /* literal, length base, or distance base */ - struct huft *t; /* pointer to next level of table */ - } v; -}; - +#include "gzip.h" +#include "LzmaDecode.h" /* Function prototypes */ -STATIC int huft_build OF((unsigned *, unsigned, unsigned, - const ush *, const ush *, struct huft **, int *)); -STATIC int huft_free OF((struct huft *)); -STATIC int inflate_codes OF((struct huft *, struct huft *, int, int)); -STATIC int inflate_stored OF((void)); -STATIC int inflate_fixed OF((void)); -STATIC int inflate_dynamic OF((void)); -STATIC int inflate_block OF((int *)); -STATIC int inflate OF((void)); -static void flush_window(void); -static void gzip_mark(void **); -static void gzip_release(void **); -STATIC uch get_byte(void); -STATIC void memzero(int *, int ); -static void makecrc(void); -static void *malloc(int); -static void free(void *); +unsigned char get_byte(void); int tikernelunzip(int,char *[], char *[]); static int tidecompress(uch *, uch *); -#if !defined(NOMEMCPY) -static uch *memcpy(uch *, const uch *, int); -#endif void kernel_entry(int, char *[], char *[]); void (*ke)(int, char *[], char *[]); /* Gen reference to kernel function */ +void (*prnt)(unsigned int, char *); /* Gen reference to Yamon print function */ +void printf(char *ptr); /* Generate our own printf */ -void (*prnt)(unsigned int, char *); /* Gen reference to Yamon print function */ - -void printf(char *ptr); /* Generate our own printf */ - - - -/* The inflate algorithm uses a sliding 32 K byte window on the uncompressed - stream to find repeated byte strings. This is implemented here as a - circular buffer. The index is updated simply by incrementing and then - ANDing with 0x7fff (32K-1). */ -/* It is left to other modules to supply the 32 K area. It is assumed - to be usable as if it were declared "uch slide[32768];" or as just - "uch *slide;" and then malloc'ed in the latter case. The definition - must be in unzip.h, included above. */ -/* unsigned wp; current position in slide */ -#define wp outcnt -#define flush_output(w) (wp=(w),flush_window()) - -/* Tables for deflate from PKZIP's appnote.txt. */ -static const unsigned border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; -static const ush cplens[] = { /* Copy lengths for literal codes 257..285 */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* note: see note #13 above about the 258 in this list. */ -static const ush cplext[] = { /* Extra bits for literal codes 257..285 */ - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99}; /* 99==invalid */ -static const ush cpdist[] = { /* Copy offsets for distance codes 0..29 */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -static const ush cpdext[] = { /* Extra bits for distance codes */ - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; - -//bvb extern uch kernelimage[]; - - - - -/* Macros for inflate() bit peeking and grabbing. - The usage is: - - NEEDBITS(j) - x = b & mask_bits[j]; - DUMPBITS(j) - - where NEEDBITS makes sure that b has at least j bits in it, and - DUMPBITS removes the bits from b. The macros use the variable k - for the number of bits in b. Normally, b and k are register - variables for speed, and are initialized at the beginning of a - routine that uses these macros from a global bit buffer and count. - - If we assume that EOB will be the longest code, then we will never - ask for bits with NEEDBITS that are beyond the end of the stream. - So, NEEDBITS should not read any more bytes than are needed to - meet the request. Then no bytes need to be "returned" to the buffer - at the end of the last block. - - However, this assumption is not true for fixed blocks--the EOB code - is 7 bits, but the other literal/length codes can be 8 or 9 bits. - (The EOB code is shorter than other codes because fixed blocks are - generally short. So, while a block always has an EOB, many other - literal/length codes have a significantly lower probability of - showing up at all.) However, by making the first table have a - lookup of seven bits, the EOB code will be found in that first - lookup, and so will not require that too many bits be pulled from - the stream. - */ - -STATIC ulg bb; /* bit buffer */ -STATIC unsigned bk; /* bits in bit buffer */ -ulg bytes_out; -static ulg free_mem_ptr; -//bvb static ulg free_mem_ptr_end; - -STATIC const ush mask_bits[] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - -#define NEXTBYTE() ((uch)get_byte()) -#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}} -#define DUMPBITS(n) {b>>=(n); k-=(n);} - - -/* - Huffman code decoding is performed using a multi-level table lookup. - The fastest way to decode is to simply build a lookup table whose - size is determined by the longest code. However, the time it takes - to build this table can also be a factor if the data being decoded - is not very long. The most common codes are necessarily the - shortest codes, so those codes dominate the decoding time, and hence - the speed. The idea is you can have a shorter table that decodes the - shorter, more probable codes, and then point to subsidiary tables for - the longer codes. The time it costs to decode the longer codes is - then traded against the time it takes to make longer tables. - - This results of this trade are in the variables lbits and dbits - below. lbits is the number of bits the first level table for literal/ - length codes can decode in one step, and dbits is the same thing for - the distance codes. Subsequent tables are also less than or equal to - those sizes. These values may be adjusted either when all of the - codes are shorter than that, in which case the longest code length in - bits is used, or when the shortest code is *longer* than the requested - table size, in which case the length of the shortest code in bits is - used. - - There are two different values for the two tables, since they code a - different number of possibilities each. The literal/length table - codes 286 possible values, or in a flat code, a little over eight - bits. The distance table codes 30 possible values, or a little less - than five bits, flat. The optimum values for speed end up being - about one bit more than those, so lbits is 8+1 and dbits is 5+1. - The optimum values may differ though from machine to machine, and - possibly even between compilers. Your mileage may vary. - */ - - -STATIC const int lbits = 9; /* bits in base literal/length lookup table */ -STATIC const int dbits = 6; /* bits in base distance lookup table */ - - -/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */ -#define BMAX 16 /* maximum bit length of any code (16 for explode) */ -#define N_MAX 288 /* maximum number of codes in any set */ - - -STATIC unsigned hufts; /* track memory usage */ - - -STATIC int huft_build(b, n, s, d, e, t, m) -unsigned *b; /* code lengths in bits (all assumed <= BMAX) */ -unsigned n; /* number of codes (assumed <= N_MAX) */ -unsigned s; /* number of simple-valued codes (0..s-1) */ -const ush *d; /* list of base values for non-simple codes */ -const ush *e; /* list of extra bits for non-simple codes */ -struct huft **t; /* result: starting table */ -int *m; /* maximum lookup bits, returns actual */ -/* Given a list of code lengths and a maximum table size, make a set of - tables to decode that set of codes. Return zero on success, one if - the given code set is incomplete (the tables are still built in this - case), two if the input is invalid (all zero length codes or an - oversubscribed set of lengths), and three if not enough memory. */ -{ - unsigned a; /* counter for codes of length k */ - unsigned c[BMAX+1]; /* bit length count table */ - unsigned f; /* i repeats in table every f entries */ - int g; /* maximum code length */ - int h; /* table level */ - register unsigned i; /* counter, current code */ - register unsigned j; /* counter */ - register int k; /* number of bits in current code */ - int l; /* bits per table (returned in m) */ - register unsigned *p; /* pointer into c[], b[], or v[] */ - register struct huft *q; /* points to current table */ - struct huft r; /* table entry for structure assignment */ - struct huft *u[BMAX]; /* table stack */ - unsigned v[N_MAX]; /* values in order of bit length */ - register int w; /* bits before this table == (l * h) */ - unsigned x[BMAX+1]; /* bit offsets, then code stack */ - unsigned *xp; /* pointer into x */ - int y; /* number of dummy codes added */ - unsigned z; /* number of entries in current table */ - - - /* Generate counts for each bit length */ - memzero(c, sizeof(c)); - p = b; i = n; - do { - /* Tracecv(*p, (stderr, (n-i >= ' ' && n-i <= '~' ? "%c %d\n" : "0x%x %d\n"), n-i, *p)); */ - - c[*p]++; /* assume all entries <= BMAX */ - p++; /* Can't combine with above line (Solaris bug) */ - } while (--i); - if (c[0] == n) /* null input--all zero length codes */ - { - *t = (struct huft *)NULL; - *m = 0; - return 0; - } - - - /* Find minimum and maximum length, bound *m by those */ - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; /* minimum code length */ - if ((unsigned)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; /* maximum code length */ - if ((unsigned)l > i) - l = i; - *m = l; - - - /* Adjust last length count to fill out codes, if needed */ - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return 2; /* bad input: more codes than bits */ - if ((y -= c[i]) < 0) - return 2; - c[i] += y; - - - /* Generate starting offsets into the value table for each length */ - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { /* note that i == g from above */ - *xp++ = (j += *p++); - } - - - /* Make a table of values in order of bit lengths */ - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - - - /* Generate the Huffman codes and for each, make the table entries */ - x[0] = i = 0; /* first Huffman code is zero */ - p = v; /* grab values in bit order */ - h = -1; /* no tables yet--level -1 */ - w = -l; /* bits decoded == (l * h) */ - u[0] = (struct huft *)NULL; /* just to keep compilers happy */ - q = (struct huft *)NULL; /* ditto */ - z = 0; /* ditto */ - - /* go through the bit lengths (k already is bits in shortest code) */ - for (; k <= g; k++) - { - a = c[k]; - while (a--) - { - /* here i is the Huffman code of length k bits for value *p */ - /* make tables up to required level */ - while (k > w + l) - { - h++; - w += l; /* previous table always l bits */ - - /* compute minimum size table less than or equal to l bits */ - z = (z = g - w) > (unsigned)l ? l : z; /* upper limit on table size */ - if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ - { /* too few codes for k-w bit table */ - f -= a + 1; /* deduct codes from patterns left */ - xp = c + k; - while (++j < z) /* try smaller tables up to z bits */ - { - if ((f <<= 1) <= *++xp) - break; /* enough codes to use up j bits */ - f -= *xp; /* else deduct codes from patterns */ - } - } - z = 1 << j; /* table entries for j-bit table */ - - /* allocate and link in new table */ - if ((q = (struct huft *)malloc((z + 1)*sizeof(struct huft))) == - (struct huft *)NULL) - { - if (h) - huft_free(u[0]); - return 3; /* not enough memory */ - } - hufts += z + 1; /* track memory usage */ - *t = q + 1; /* link to list for huft_free() */ - *(t = &(q->v.t)) = (struct huft *)NULL; - u[h] = ++q; /* table starts after link */ - - /* connect to last table, if there is one */ - if (h) - { - x[h] = i; /* save pattern for backing up */ - r.b = (uch)l; /* bits to dump before this table */ - r.e = (uch)(16 + j); /* bits in this table */ - r.v.t = q; /* pointer to this table */ - j = i >> (w - l); /* (get around Turbo C bug) */ - u[h-1][j] = r; /* connect to last table */ - } - } - - /* set up table entry in r */ - r.b = (uch)(k - w); - if (p >= v + n) - r.e = 99; /* out of values--invalid code */ - else if (*p < s) - { - r.e = (uch)(*p < 256 ? 16 : 15); /* 256 is end-of-block code */ - r.v.n = (ush)(*p); /* simple code is just the value */ - p++; /* one compiler does not like *p++ */ - } - else - { - r.e = (uch)e[*p - s]; /* non-simple--look up in lists */ - r.v.n = d[*p++ - s]; - } - - /* fill code-like entries with r */ - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; - - /* backwards increment the k-bit code i */ - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; - - /* backup over finished tables */ - while ((i & ((1 << w) - 1)) != x[h]) - { - h--; /* don't need to update q */ - w -= l; - } - } - } - - - /* Return true (1) if we were given an incomplete table */ - return y != 0 && g != 1; -} - - - -STATIC int huft_free(t) -struct huft *t; /* table to free */ -/* Free the malloc'ed tables built by huft_build(), which makes a linked - list of the tables it made, with the links in a dummy first entry of - each table. */ -{ - register struct huft *p, *q; - - - /* Go through linked list, freeing from the malloced (t[-1]) address. */ - p = t; - while (p != (struct huft *)NULL) - { - q = (--p)->v.t; - free((char*)p); - p = q; - } - return 0; -} - - -STATIC int inflate_codes(tl, td, bl, bd) -struct huft *tl, *td; /* literal/length and distance decoder tables */ -int bl, bd; /* number of bits decoded by tl[] and td[] */ -/* inflate (decompress) the codes in a deflated (compressed) block. - Return an error code or zero if it all goes ok. */ -{ - register unsigned e; /* table entry flag/number of extra bits */ - unsigned n, d; /* length and index for copy */ - unsigned w; /* current window position */ - struct huft *t; /* pointer to table entry */ - unsigned ml, md; /* masks for bl and bd bits */ - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - - - /* make local copies of globals */ - b = bb; /* initialize bit buffer */ - k = bk; - w = wp; /* initialize window position */ - - /* inflate the coded data */ - ml = mask_bits[bl]; /* precompute masks for speed */ - md = mask_bits[bd]; - for (;;) /* do until end of block */ - { - NEEDBITS((unsigned)bl) - if ((e = (t = tl + ((unsigned)b & ml))->e) > 16) - { - do { - if (e == 99) - { - return 1; - } - DUMPBITS(t->b) - e -= 16; - NEEDBITS(e) - } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); - } - DUMPBITS(t->b) - if (e == 16) /* then it's a literal */ - { - slide[w++] = (uch)t->v.n; - /* Tracevv((stderr, "%c", slide[w-1])); */ - if (w == WSIZE) - { - flush_output(w); - w = 0; - } - } - else /* it's an EOB or a length */ - { - /* exit if end of block */ - if (e == 15) - { - break; - } - - /* get length of block to copy */ - NEEDBITS(e) - n = t->v.n + ((unsigned)b & mask_bits[e]); - DUMPBITS(e); - - /* decode distance of block to copy */ - NEEDBITS((unsigned)bd) - if ((e = (t = td + ((unsigned)b & md))->e) > 16) - { - do { - if (e == 99) - { - return 1; - } - DUMPBITS(t->b) - e -= 16; - NEEDBITS(e) - } while ((e = (t = t->v.t + ((unsigned)b & mask_bits[e]))->e) > 16); - } - DUMPBITS(t->b) - NEEDBITS(e) - d = w - t->v.n - ((unsigned)b & mask_bits[e]); - DUMPBITS(e) - /* Tracevv((stderr,"\\[%d,%d]", w-d, n)); */ - - /* do the copy */ - do { - n -= (e = (e = WSIZE - ((d &= WSIZE-1) > w ? d : w)) > n ? n : e); -#if !defined(NOMEMCPY) && !defined(DEBUG) - if (w - d >= e) /* (this test assumes unsigned comparison) */ - { - memcpy(slide + w, slide + d, e); - w += e; - d += e; - } - else /* do it slow to avoid memcpy() overlap */ -#endif /* !NOMEMCPY */ - do { - slide[w++] = slide[d++]; - /* Tracevv((stderr, "%c", slide[w-1])); */ - } while (--e); - - if (w == WSIZE) - { - flush_output(w); - w = 0; - } - } while (n); - } - } - - - /* restore the globals from the locals */ - wp = w; /* restore global window pointer */ - bb = b; /* restore global bit buffer */ - bk = k; - - /* done */ - return 0; -} - - - -STATIC int inflate_stored() -/* "decompress" an inflated type 0 (stored) block. */ +int tikernelunzip(int argc, char *argv[], char *arge[]) { - unsigned n; /* number of bytes in block */ - unsigned w; /* current window position */ - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - - - /* make local copies of globals */ - b = bb; /* initialize bit buffer */ - k = bk; - w = wp; /* initialize window position */ - + extern unsigned int _ftext; + extern uch kernelimage[]; + uch *in, *out; + int status; - /* go to byte boundary */ - n = k & 7; - DUMPBITS(n); + printf("Launching kernel decompressor.\n"); + out = (unsigned char *) LOADADDR; + in = &(kernelimage[0]); - /* get the length and its complement */ - NEEDBITS(16) - n = ((unsigned)b & 0xffff); - DUMPBITS(16) - NEEDBITS(16) - if (n != (unsigned)((~b) & 0xffff)) - return 1; /* error in compressed data */ - DUMPBITS(16) + status = tidecompress(in, out); + if (status == 0) { + printf("Kernel decompressor was successful ... launching kernel.\n"); - /* read and output the compressed data */ - while (n--) - { - NEEDBITS(8) - slide[w++] = (uch)b; - if (w == WSIZE) - { - flush_output(w); - w = 0; - } - DUMPBITS(8) - } + ke = ( void(*)(int, char *[],char*[]))kernel_entry; + (*ke)(argc,argv,arge); - - /* restore the globals from the locals */ - wp = w; /* restore global window pointer */ - bb = b; /* restore global bit buffer */ - bk = k; - - return 0; + return (0); + } else { + printf("Error in decompression.\n"); + return(1); + } } - - -STATIC int inflate_fixed() -/* decompress an inflated type 1 (fixed Huffman codes) block. We should - either replace this with a custom decoder, or at least precompute the - Huffman tables. */ +#if 0 +char hex[] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'}; +void print_i(int i) { - int i; /* temporary variable */ - struct huft *tl; /* literal/length code table */ - struct huft *td; /* distance code table */ - int bl; /* lookup bits for tl */ - int bd; /* lookup bits for td */ - unsigned l[288]; /* length list for huft_build */ - - - /* set up literal table */ - for (i = 0; i < 144; i++) - l[i] = 8; - for (; i < 256; i++) - l[i] = 9; - for (; i < 280; i++) - l[i] = 7; - for (; i < 288; i++) /* make a complete, but wrong code set */ - l[i] = 8; - bl = 7; - if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0) - return i; - + int j; + char buf[11]; - /* set up distance table */ - for (i = 0; i < 30; i++) /* make an incomplete code set */ - l[i] = 5; - bd = 5; - if ((i = huft_build(l, 30, 0, cpdist, cpdext, &td, &bd)) > 1) - { - huft_free(tl); - - return i; - } - - - /* decompress until an end-of-block code */ - { - int iii; - - iii = inflate_codes(tl, td, bl, bd); - if (iii) - return 1; - } + buf[0] = '0'; + buf[1] = 'x'; + buf[10] = 0; + + for (j = 0; j < 8; j++) + { + buf[2 + 7 - j] = hex[i & 0xf]; + i = i >> 4; + } - /* free the decoding tables, return */ - huft_free(tl); - huft_free(td); - return 0; + printf(buf); } - - - -STATIC int inflate_dynamic() -/* decompress an inflated type 2 (dynamic Huffman codes) block. */ -{ - int i; /* temporary variables */ - unsigned j; - unsigned l; /* last length */ - unsigned m; /* mask for bit lengths table */ - unsigned n; /* number of lengths to get */ - struct huft *tl; /* literal/length code table */ - struct huft *td; /* distance code table */ - int bl; /* lookup bits for tl */ - int bd; /* lookup bits for td */ - unsigned nb; /* number of bit length codes */ - unsigned nl; /* number of literal/length codes */ - unsigned nd; /* number of distance codes */ -#ifdef PKZIP_BUG_WORKAROUND - unsigned ll[288+32]; /* literal/length and distance code lengths */ -#else - unsigned ll[286+30]; /* literal/length and distance code lengths */ -#endif - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - - - /* make local bit buffer */ - b = bb; - k = bk; - - /* read in table lengths */ - NEEDBITS(5) - nl = 257 + ((unsigned)b & 0x1f); /* number of literal/length codes */ - DUMPBITS(5) - NEEDBITS(5) - nd = 1 + ((unsigned)b & 0x1f); /* number of distance codes */ - DUMPBITS(5) - NEEDBITS(4) - nb = 4 + ((unsigned)b & 0xf); /* number of bit length codes */ - DUMPBITS(4) -#ifdef PKZIP_BUG_WORKAROUND - if (nl > 288 || nd > 32) -#else - if (nl > 286 || nd > 30) #endif - return 1; /* bad lengths */ - - - /* read in bit-length-code lengths */ - for (j = 0; j < nb; j++) - { - NEEDBITS(3) - ll[border[j]] = (unsigned)b & 7; - DUMPBITS(3) - } - for (; j < 19; j++) - ll[border[j]] = 0; - - - /* build decoding table for trees--single level, 7 bit lookup */ - bl = 7; - if ((i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl)) != 0) - { - if (i == 1) - huft_free(tl); - return i; /* incomplete code set */ - } - - - /* read in literal and distance code lengths */ - n = nl + nd; - m = mask_bits[bl]; - i = l = 0; - while ((unsigned)i < n) - { - NEEDBITS((unsigned)bl) - j = (td = tl + ((unsigned)b & m))->b; - DUMPBITS(j) - j = td->v.n; - if (j < 16) /* length of code in bits (0..15) */ - ll[i++] = l = j; /* save last length in l */ - else if (j == 16) /* repeat last length 3 to 6 times */ - { - NEEDBITS(2) - j = 3 + ((unsigned)b & 3); - DUMPBITS(2) - if ((unsigned)i + j > n) - return 1; - while (j--) - ll[i++] = l; - } - else if (j == 17) /* 3 to 10 zero length codes */ - { - NEEDBITS(3) - j = 3 + ((unsigned)b & 7); - DUMPBITS(3) - if ((unsigned)i + j > n) - return 1; - while (j--) - ll[i++] = 0; - l = 0; - } - else /* j == 18: 11 to 138 zero length codes */ - { - NEEDBITS(7) - j = 11 + ((unsigned)b & 0x7f); - DUMPBITS(7) - if ((unsigned)i + j > n) - return 1; - while (j--) - ll[i++] = 0; - l = 0; - } - } - - - /* free decoding table for trees */ - huft_free(tl); - - - /* restore the global bit buffer */ - bb = b; - bk = k; - - - /* build the decoding tables for literal/length and distance codes */ - bl = lbits; - if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0) - { - if (i == 1) { - /* error(" incomplete literal tree\n"); */ - huft_free(tl); - } - return i; /* incomplete code set */ - } - bd = dbits; - if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0) - { - if (i == 1) { - /* error(" incomplete distance tree\n"); */ -#ifdef PKZIP_BUG_WORKAROUND - i = 0; - } -#else - huft_free(td); - } - huft_free(tl); - return i; /* incomplete code set */ -#endif - } - - /* decompress until an end-of-block code */ - { - int iii; - iii = inflate_codes(tl, td, bl, bd); - if (iii ) - return 1; - } - - /* free the decoding tables, return */ - huft_free(tl); - huft_free(td); - - return 0; -} - - - -STATIC int inflate_block(e) -int *e; /* last block flag */ -/* decompress an inflated block */ -{ - unsigned t; /* block type */ - register ulg b; /* bit buffer */ - register unsigned k; /* number of bits in bit buffer */ - - - /* make local bit buffer */ - b = bb; - k = bk; - - /* read in last block bit */ - NEEDBITS(1); - *e = (int)b & 1; - DUMPBITS(1); - - - /* read in block type */ - NEEDBITS(2); - t = (unsigned)b & 3; - DUMPBITS(2); - - - /* restore the global bit buffer */ - bb = b; - bk = k; - - /* inflate that block type */ - if (t == 2) - return inflate_dynamic(); - if (t == 0) - return inflate_stored(); - if (t == 1) - return inflate_fixed(); - - - /* bad block type */ - return 2; -} - - - -STATIC int inflate() -/* decompress an inflated entry */ -{ - int e; /* last block flag */ - int r; /* result code */ - unsigned h; /* maximum struct huft's malloc'ed */ - void *ptr; - - /* initialize window, bit buffer */ - wp = 0; - bk = 0; - bb = 0; - - /* Initialize crc table */ - makecrc(); - - - /* decompress until the last block */ - h = 0; - do { - hufts = 0; - gzip_mark(&ptr); - r = inflate_block(&e); - if (r != 0) { - gzip_release(&ptr); - return r; - } - gzip_release(&ptr); - if (hufts > h) - h = hufts; - } while (!e); - - /* Undo too much lookahead. The next read will be byte aligned so we - * can discard unused bits in the last meaningful byte. - */ - while (bk >= 8) { - bk -= 8; - inptr--; - } - - /* flush out slide */ - flush_output(wp); - - - /* return success */ -#ifdef DEBUG - fprintf(stderr, "<%u> ", h); -#endif /* DEBUG */ - return 0; -} - -/********************************************************************** - * - * The following are support routines for inflate.c - * - **********************************************************************/ - -static ulg crc_32_tab[256]; -static ulg crc; /* initialized in makecrc() so it'll reside in bss */ -#define CRC_VALUE (crc ^ 0xffffffffL) - -/* - * Code to compute the CRC-32 table. Borrowed from - * gzip-1.0.3/makecrc.c. - */ - -static void -makecrc(void) -{ -/* Not copyrighted 1990 Mark Adler */ - - unsigned long c; /* crc shift register */ - unsigned long e; /* polynomial exclusive-or pattern */ - int i; /* counter for all possible eight bit values */ - int k; /* byte being shifted into crc apparatus */ - - /* terms of polynomial defining this crc (except x^32): */ - static const int p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* Make exclusive-or pattern from polynomial */ - e = 0; - for (i = 0; i < sizeof(p)/sizeof(int); i++) - e |= 1L << (31 - p[i]); - - crc_32_tab[0] = 0; - - for (i = 1; i < 256; i++) - { - c = 0; - for (k = i | 256; k != 1; k >>= 1) - { - c = c & 1 ? (c >> 1) ^ e : c >> 1; - if (k & 1) - c ^= e; - } - crc_32_tab[i] = c; - } - - /* this is initialized here so this code could reside in ROM */ - crc = (ulg)0xffffffffL; /* shift register contents */ -} - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -/* - * Do the uncompression! - */ -static int gunzip(void) -{ - uch flags; - unsigned char magic[2]; /* magic header */ - char method; - ulg orig_crc = 0; /* original crc */ - ulg orig_len = 0; /* original uncompressed length */ - int res; - - magic[0] = (unsigned char)get_byte(); - magic[1] = (unsigned char)get_byte(); - method = (unsigned char)get_byte(); - - - if (magic[0] != 037 || - ((magic[1] != 0213) && (magic[1] != 0236))) { - /* error("bad gzip magic numbers"); */ - //bvb printf("Compressed Kernel image Magic number error: 0x%x 0x%x\n", - //bvb (unsigned int)magic[0], (unsigned int)magic[1]); - return -1; - } - - /* We only support method #8, DEFLATED */ - if (method != 8) { - /* error("internal error, invalid method"); */ - //bvb printf("Kernel Compression Method number is %d(must be 8)\n", - //bvb (unsigned int) method); - - return -1; - } - - flags = (uch)get_byte(); - if ((flags & ENCRYPTED) != 0) { - /* error("Input is encrypted\n"); */ - return -1; - } - if ((flags & CONTINUATION) != 0) { - /* error("Multi part input\n"); */ - return -1; - } - if ((flags & RESERVED) != 0) { - /* error("Input has invalid flags\n"); */ - return -1; - } - (ulg)get_byte(); /* Get timestamp */ - /* bvb - ((ulg)get_byte()) << 8; - ((ulg)get_byte()) << 16; - ((ulg)get_byte()) << 24; - */ - (ulg)get_byte(); - (ulg)get_byte(); - (ulg)get_byte(); - - (void)get_byte(); /* Ignore extra flags for the moment */ - (void)get_byte(); /* Ignore OS type for the moment */ - - if ((flags & EXTRA_FIELD) != 0) { - unsigned len = (unsigned)get_byte(); - len |= ((unsigned)get_byte())<<8; - while (len--) (void)get_byte(); - } - - /* Get original file name if it was truncated */ - if ((flags & ORIG_NAME) != 0) { - /* Discard the old name */ - while (get_byte() != 0) /* null */ ; - } - - /* Discard file comment if any */ - if ((flags & COMMENT) != 0) { - while (get_byte() != 0) /* null */ ; - } - - /* Decompress */ - res = inflate(); - if (res) { - switch (res) { - case 0: - break; - case 1: - //bvb printf("Error: invalid compressed format (err=1)\n"); - break; - case 2: - //bvb printf("Error: invalid compressed format (err=2)\n"); - break; - case 3: - //bvb printf("Error: out of memory\n"); - break; - default: - //bvb printf("Error: invalid compressed format (other)\n"); - break; - } - return -1; - } - - /* Get the crc and original length */ - /* crc32 (see algorithm.doc) - * uncompressed input size modulo 2^32 - */ - orig_crc = (ulg) get_byte(); - orig_crc |= (ulg) get_byte() << 8; - orig_crc |= (ulg) get_byte() << 16; - orig_crc |= (ulg) get_byte() << 24; - - orig_len = (ulg) get_byte(); - orig_len |= (ulg) get_byte() << 8; - orig_len |= (ulg) get_byte() << 16; - orig_len |= (ulg) get_byte() << 24; - - /* Validate decompression */ - if (orig_crc != CRC_VALUE) { - //bvb printf("ERROR: crc error\n"); - return -1; - } - if (orig_len != bytes_out) { - //bvb printf("Error: CRC length error\n"); - return -1; - } - //bvb printf("Kernel Compression OK\n"); - return 0; -} - -int tikernelunzip(int argc, char *argv[], char *arge[]) -{ - extern unsigned int _ftext; - extern uch kernelimage[]; - uch *in, *out; - int status; - //bvb int *p; - - printf("Launching kernel decompressor.\n"); - - // out = (uch *)OUTBUF_ADDR; - out = (uch *)&_ftext; - in = &(kernelimage[0]); /* temp test file */ - - status = tidecompress(in, out); - - if (status == 0) - { - //bvb printf("Kernel Decompressor was successful, addr:0x%x\n", - //bvb (unsigned int)out); - //bvb return(0); - - printf("Kernel decompressor was successful ... launching kernel.\n"); - - ke = ( void(*)(int, char *[],char*[]))kernel_entry; - (*ke)(argc,argv,arge); - - return (0); - - } - else - { - //bvb printf("Error in compression: status=0x%x\n", status); - printf("Error in decompression!\n"); - return(1); - } - - //bvb p = (int *)0xb6000000; - //bvb *p = 0x46464646; - -} - int tidecompress(uch *indata, uch *outdata) { - extern unsigned int inflate_free_memory_start; - extern unsigned int inflate_slide_window; - - int i; - //bvb int *p; - //bvb int status; - int j; - - - j = 0; - //bvb p = (int *)0xb6000000; - //bvb *p = 0x556e7a70; - - /* Setup memory limits */ - //bvb freememstart = (void *)FREEMEM_START; - freememstart = (void *)&inflate_free_memory_start; - window = (uch *)&inflate_slide_window; /* only if using raw memory */ - - bytes_out = 0; - output_ptr = 0; - output_data = outdata; - input_data = indata; - - i = gunzip(); - return(i); + extern unsigned int workspace; + extern unsigned char kernelimage[], kernelimage_end[]; + unsigned int i; /* temp value */ + unsigned int lc; /* literal context bits */ + unsigned int lp; /* literal pos state bits */ + unsigned int pb; /* pos state bits */ + unsigned int osize; /* uncompressed size */ + unsigned int wsize; /* window size */ + unsigned int insize = kernelimage_end - kernelimage; + int status; + + output_ptr = 0; + output_data = outdata; + input_data = indata; + + /* lzma args */ + i = get_byte(); + lc = i % 9, i = i / 9; + lp = i % 5, pb = i / 5; + + /* skip rest of the LZMA coder property */ + for (i = 0; i < 4; i++) + get_byte(); + + /* read the lower half of uncompressed size in the header */ + osize = ((unsigned int)get_byte()) + + ((unsigned int)get_byte() << 8) + + ((unsigned int)get_byte() << 16) + + ((unsigned int)get_byte() << 24); + + /* skip rest of the header (upper half of uncompressed size) */ + for (i = 0; i < 4; i++) + get_byte(); + + i = 0; + wsize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb); + + if ((status = LzmaDecode((unsigned char *) &workspace, wsize, lc, lp, pb, + indata + 13, insize - 13, (unsigned char *) output_data, osize, &i)) == LZMA_RESULT_OK) + return 0; + + return status; } void printf(char *ptr) { - unsigned int *tempptr = (unsigned int *)0x90000534; - prnt = ( void (*)(unsigned int, char *)) *tempptr; - (*prnt)(0,ptr); -} - - -uch get_byte() -{ - uch c; - - c = *input_data; - input_data++; - - return(c); -} - -void memzero(int table[], int size) -{ - int i; - int j = size/4; - - for(i=0; i<j; i++) - { - table[i] = 0; - } -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -void flush_window() -{ - ulg c = crc; - unsigned n; - uch *in, *out, ch; - - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; - - //bvb printf("Bytes uncompressed: %d\r", bytes_out); -} - -static void gzip_mark(void **ptr) -{ - /* arch_decomp_wdog(); */ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - /* arch_decomp_wdog(); */ - free_mem_ptr = (long) *ptr; + unsigned int *tempptr = (unsigned int *)0x90000534; + prnt = ( void (*)(unsigned int, char *)) *tempptr; + (*prnt)(0,ptr); } -void *malloc(int size) +unsigned char get_byte() { - uch *p; - void *r; - - r = freememstart; - p = (uch *)r; - - p = p + size; - freememstart = (void *)p; + unsigned char c; + + c = *input_data; + input_data++; - return(r); + return c; } -void free(void *p) -{ -} - - |