diff options
Diffstat (limited to 'target/linux/generic/files/include')
6 files changed, 279 insertions, 82 deletions
diff --git a/target/linux/generic/files/include/linux/ar8216_platform.h b/target/linux/generic/files/include/linux/ar8216_platform.h index f5c2ef065..c6c6144e8 100644 --- a/target/linux/generic/files/include/linux/ar8216_platform.h +++ b/target/linux/generic/files/include/linux/ar8216_platform.h @@ -44,6 +44,7 @@ struct ar8327_pad_cfg { bool pipe_rxclk_sel; bool txclk_delay_en; bool rxclk_delay_en; + bool sgmii_delay_en; enum ar8327_clk_delay_sel txclk_delay_sel; enum ar8327_clk_delay_sel rxclk_delay_sel; }; @@ -74,7 +75,8 @@ struct ar8327_platform_data { struct ar8327_pad_cfg *pad0_cfg; struct ar8327_pad_cfg *pad5_cfg; struct ar8327_pad_cfg *pad6_cfg; - struct ar8327_port_cfg cpuport_cfg; + struct ar8327_port_cfg port0_cfg; + struct ar8327_port_cfg port6_cfg; struct ar8327_led_cfg *led_cfg; }; diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h index 53b25d229..a0b7531fd 100644 --- a/target/linux/generic/files/include/linux/ath9k_platform.h +++ b/target/linux/generic/files/include/linux/ath9k_platform.h @@ -22,6 +22,8 @@ #define ATH9K_PLAT_EEP_MAX_WORDS 2048 struct ath9k_platform_data { + const char *eeprom_name; + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; u8 *macaddr; diff --git a/target/linux/generic/files/include/linux/platform_data/b53.h b/target/linux/generic/files/include/linux/platform_data/b53.h new file mode 100644 index 000000000..78427417a --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/b53.h @@ -0,0 +1,36 @@ +/* + * B53 platform data + * + * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __B53_H +#define __B53_H + +#include <linux/kernel.h> + +struct b53_platform_data { + u32 chip_id; + u16 enabled_ports; + + /* allow to specify an ethX alias */ + const char *alias; + + /* only used by MMAP'd driver */ + unsigned big_endian:1; + void __iomem *regs; +}; + +#endif diff --git a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 000000000..1ade657d5 --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include <brcmfmac_platform.h> + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h index 4f4085ef8..b53431e0a 100644 --- a/target/linux/generic/files/include/linux/switch.h +++ b/target/linux/generic/files/include/linux/switch.h @@ -13,86 +13,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ +#ifndef _LINUX_SWITCH_H +#define _LINUX_SWITCH_H -#ifndef __LINUX_SWITCH_H -#define __LINUX_SWITCH_H - -#include <linux/types.h> -#include <linux/netdevice.h> -#include <linux/netlink.h> -#include <linux/genetlink.h> -#ifndef __KERNEL__ -#include <netlink/netlink.h> -#include <netlink/genl/genl.h> -#include <netlink/genl/ctrl.h> -#else #include <net/genetlink.h> -#endif - -/* main attributes */ -enum { - SWITCH_ATTR_UNSPEC, - /* global */ - SWITCH_ATTR_TYPE, - /* device */ - SWITCH_ATTR_ID, - SWITCH_ATTR_DEV_NAME, - SWITCH_ATTR_ALIAS, - SWITCH_ATTR_NAME, - SWITCH_ATTR_VLANS, - SWITCH_ATTR_PORTS, - SWITCH_ATTR_CPU_PORT, - /* attributes */ - SWITCH_ATTR_OP_ID, - SWITCH_ATTR_OP_TYPE, - SWITCH_ATTR_OP_NAME, - SWITCH_ATTR_OP_PORT, - SWITCH_ATTR_OP_VLAN, - SWITCH_ATTR_OP_VALUE_INT, - SWITCH_ATTR_OP_VALUE_STR, - SWITCH_ATTR_OP_VALUE_PORTS, - SWITCH_ATTR_OP_DESCRIPTION, - /* port lists */ - SWITCH_ATTR_PORT, - SWITCH_ATTR_MAX -}; - -/* commands */ -enum { - SWITCH_CMD_UNSPEC, - SWITCH_CMD_GET_SWITCH, - SWITCH_CMD_NEW_ATTR, - SWITCH_CMD_LIST_GLOBAL, - SWITCH_CMD_GET_GLOBAL, - SWITCH_CMD_SET_GLOBAL, - SWITCH_CMD_LIST_PORT, - SWITCH_CMD_GET_PORT, - SWITCH_CMD_SET_PORT, - SWITCH_CMD_LIST_VLAN, - SWITCH_CMD_GET_VLAN, - SWITCH_CMD_SET_VLAN -}; - -/* data types */ -enum switch_val_type { - SWITCH_TYPE_UNSPEC, - SWITCH_TYPE_INT, - SWITCH_TYPE_STRING, - SWITCH_TYPE_PORTS, - SWITCH_TYPE_NOVAL, -}; - -/* port nested attributes */ -enum { - SWITCH_PORT_UNSPEC, - SWITCH_PORT_ID, - SWITCH_PORT_FLAG_TAGGED, - SWITCH_PORT_ATTR_MAX -}; - -#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000 - -#ifdef __KERNEL__ +#include <uapi/linux/switch.h> struct switch_dev; struct switch_op; @@ -173,6 +98,7 @@ struct switch_dev_ops { }; struct switch_dev { + struct device_node *of_node; const struct switch_dev_ops *ops; /* will be automatically filled */ char devname[IFNAMSIZ]; @@ -193,6 +119,7 @@ struct switch_dev { struct mutex sw_mutex; struct switch_port *portbuf; + struct switch_portmap *portmap; char buf[128]; @@ -206,6 +133,11 @@ struct switch_port { u32 flags; }; +struct switch_portmap { + u32 virt; + const char *s; +}; + struct switch_val { const struct switch_attr *attr; int port_vlan; @@ -232,6 +164,4 @@ struct switch_attr { int max; }; -#endif - -#endif +#endif /* _LINUX_SWITCH_H */ diff --git a/target/linux/generic/files/include/uapi/linux/switch.h b/target/linux/generic/files/include/uapi/linux/switch.h new file mode 100644 index 000000000..a59b23953 --- /dev/null +++ b/target/linux/generic/files/include/uapi/linux/switch.h @@ -0,0 +1,103 @@ +/* + * switch.h: Switch configuration API + * + * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI_LINUX_SWITCH_H +#define _UAPI_LINUX_SWITCH_H + +#include <linux/types.h> +#include <linux/netdevice.h> +#include <linux/netlink.h> +#include <linux/genetlink.h> +#ifndef __KERNEL__ +#include <netlink/netlink.h> +#include <netlink/genl/genl.h> +#include <netlink/genl/ctrl.h> +#endif + +/* main attributes */ +enum { + SWITCH_ATTR_UNSPEC, + /* global */ + SWITCH_ATTR_TYPE, + /* device */ + SWITCH_ATTR_ID, + SWITCH_ATTR_DEV_NAME, + SWITCH_ATTR_ALIAS, + SWITCH_ATTR_NAME, + SWITCH_ATTR_VLANS, + SWITCH_ATTR_PORTS, + SWITCH_ATTR_PORTMAP, + SWITCH_ATTR_CPU_PORT, + /* attributes */ + SWITCH_ATTR_OP_ID, + SWITCH_ATTR_OP_TYPE, + SWITCH_ATTR_OP_NAME, + SWITCH_ATTR_OP_PORT, + SWITCH_ATTR_OP_VLAN, + SWITCH_ATTR_OP_VALUE_INT, + SWITCH_ATTR_OP_VALUE_STR, + SWITCH_ATTR_OP_VALUE_PORTS, + SWITCH_ATTR_OP_DESCRIPTION, + /* port lists */ + SWITCH_ATTR_PORT, + SWITCH_ATTR_MAX +}; + +enum { + /* port map */ + SWITCH_PORTMAP_PORTS, + SWITCH_PORTMAP_SEGMENT, + SWITCH_PORTMAP_VIRT, + SWITCH_PORTMAP_MAX +}; + +/* commands */ +enum { + SWITCH_CMD_UNSPEC, + SWITCH_CMD_GET_SWITCH, + SWITCH_CMD_NEW_ATTR, + SWITCH_CMD_LIST_GLOBAL, + SWITCH_CMD_GET_GLOBAL, + SWITCH_CMD_SET_GLOBAL, + SWITCH_CMD_LIST_PORT, + SWITCH_CMD_GET_PORT, + SWITCH_CMD_SET_PORT, + SWITCH_CMD_LIST_VLAN, + SWITCH_CMD_GET_VLAN, + SWITCH_CMD_SET_VLAN +}; + +/* data types */ +enum switch_val_type { + SWITCH_TYPE_UNSPEC, + SWITCH_TYPE_INT, + SWITCH_TYPE_STRING, + SWITCH_TYPE_PORTS, + SWITCH_TYPE_NOVAL, +}; + +/* port nested attributes */ +enum { + SWITCH_PORT_UNSPEC, + SWITCH_PORT_ID, + SWITCH_PORT_FLAG_TAGGED, + SWITCH_PORT_ATTR_MAX +}; + +#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000 + + +#endif /* _UAPI_LINUX_SWITCH_H */ |