Merge trunk into realtek-unstable

Conflicts:
	Config.in
	feeds.conf.default
	package/base-files/files/etc/hotplug2-common.rules
	package/network/config/netifd/files/etc/init.d/network

6 files changed, 279 insertions, 82 deletions

diff --git a/target/linux/generic/files/include/linux/ar8216_platform.h b/target/linux/generic/files/include/linux/ar8216_platform.h
index f5c2ef065..c6c6144e8 100644
--- a/target/linux/generic/files/include/linux/ar8216_platform.h
+++ b/target/linux/generic/files/include/linux/ar8216_platform.h
@@ -44,6 +44,7 @@ struct ar8327_pad_cfg {
 	bool pipe_rxclk_sel;
 	bool txclk_delay_en;
 	bool rxclk_delay_en;
+	bool sgmii_delay_en;
 	enum ar8327_clk_delay_sel txclk_delay_sel;
 	enum ar8327_clk_delay_sel rxclk_delay_sel;
 };
@@ -74,7 +75,8 @@ struct ar8327_platform_data {
 	struct ar8327_pad_cfg *pad0_cfg;
 	struct ar8327_pad_cfg *pad5_cfg;
 	struct ar8327_pad_cfg *pad6_cfg;
-	struct ar8327_port_cfg cpuport_cfg;
+	struct ar8327_port_cfg port0_cfg;
+	struct ar8327_port_cfg port6_cfg;
 	struct ar8327_led_cfg *led_cfg;
 };
 
diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h
index 53b25d229..a0b7531fd 100644
--- a/target/linux/generic/files/include/linux/ath9k_platform.h
+++ b/target/linux/generic/files/include/linux/ath9k_platform.h
@@ -22,6 +22,8 @@
 #define ATH9K_PLAT_EEP_MAX_WORDS	2048
 
 struct ath9k_platform_data {
+	const char *eeprom_name;
+
 	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
 	u8 *macaddr;
 
diff --git a/target/linux/generic/files/include/linux/platform_data/b53.h b/target/linux/generic/files/include/linux/platform_data/b53.h
new file mode 100644
index 000000000..78427417a
--- /dev/null
+++ b/target/linux/generic/files/include/linux/platform_data/b53.h
@@ -0,0 +1,36 @@
+/*
+ * B53 platform data
+ *
+ * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_H
+#define __B53_H
+
+#include <linux/kernel.h>
+
+struct b53_platform_data {
+	u32 chip_id;
+	u16 enabled_ports;
+
+	/* allow to specify an ethX alias */
+	const char *alias;
+
+	/* only used by MMAP'd driver */
+	unsigned big_endian:1;
+	void __iomem *regs;
+};
+
+#endif
diff --git a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h
new file mode 100644
index 000000000..1ade657d5
--- /dev/null
+++ b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2013 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+#define _LINUX_BRCMFMAC_PLATFORM_H
+
+/*
+ * Platform specific driver functions and data. Through the platform specific
+ * device data functions can be provided to help the brcmfmac driver to
+ * operate with the device in combination with the used platform.
+ *
+ * Use the platform data in the following (similar) way:
+ *
+ *
+#include <brcmfmac_platform.h>
+
+
+static void brcmfmac_power_on(void)
+{
+}
+
+static void brcmfmac_power_off(void)
+{
+}
+
+static void brcmfmac_reset(void)
+{
+}
+
+static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
+	.power_on		= brcmfmac_power_on,
+	.power_off		= brcmfmac_power_off,
+	.reset			= brcmfmac_reset
+};
+
+static struct platform_device brcmfmac_device = {
+	.name			= BRCMFMAC_SDIO_PDATA_NAME,
+	.id			= PLATFORM_DEVID_NONE,
+	.dev.platform_data	= &brcmfmac_sdio_pdata
+};
+
+void __init brcmfmac_init_pdata(void)
+{
+	brcmfmac_sdio_pdata.oob_irq_supported = true;
+	brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
+	brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
+					    IORESOURCE_IRQ_HIGHLEVEL;
+	platform_device_register(&brcmfmac_device);
+}
+ *
+ *
+ * Note: the brcmfmac can be loaded as module or be statically built-in into
+ * the kernel. If built-in then do note that it uses module_init (and
+ * module_exit) routines which equal device_initcall. So if you intend to
+ * create a module with the platform specific data for the brcmfmac and have
+ * it built-in to the kernel then use a higher initcall then device_initcall
+ * (see init.h). If this is not done then brcmfmac will load without problems
+ * but will not pickup the platform data.
+ *
+ * When the driver does not "detect" platform driver data then it will continue
+ * without reporting anything and just assume there is no data needed. Which is
+ * probably true for most platforms.
+ *
+ * Explanation of the platform_data fields:
+ *
+ * drive_strength: is the preferred drive_strength to be used for the SDIO
+ * pins. If 0 then a default value will be used. This is the target drive
+ * strength, the exact drive strength which will be used depends on the
+ * capabilities of the device.
+ *
+ * oob_irq_supported: does the board have support for OOB interrupts. SDIO
+ * in-band interrupts are relatively slow and for having less overhead on
+ * interrupt processing an out of band interrupt can be used. If the HW
+ * supports this then enable this by setting this field to true and configure
+ * the oob related fields.
+ *
+ * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
+ * used for registering the irq using request_irq function.
+ *
+ * power_on: This function is called by the brcmfmac when the module gets
+ * loaded. This can be particularly useful for low power devices. The platform
+ * spcific routine may for example decide to power up the complete device.
+ * If there is no use-case for this function then provide NULL.
+ *
+ * power_off: This function is called by the brcmfmac when the module gets
+ * unloaded. At this point the device can be powered down or otherwise be reset.
+ * So if an actual power_off is not supported but reset is then reset the device
+ * when this function gets called. This can be particularly useful for low power
+ * devices. If there is no use-case for this function (either power-down or
+ * reset) then provide NULL.
+ *
+ * reset: This function can get called if the device communication broke down.
+ * This functionality is particularly useful in case of SDIO type devices. It is
+ * possible to reset a dongle via sdio data interface, but it requires that
+ * this is fully functional. This function is chip/module specific and this
+ * function should return only after the complete reset has completed.
+ */
+
+#define BRCMFMAC_SDIO_PDATA_NAME	"brcmfmac_sdio"
+
+struct brcmfmac_sdio_platform_data {
+	unsigned int drive_strength;
+	bool oob_irq_supported;
+	unsigned int oob_irq_nr;
+	unsigned long oob_irq_flags;
+	void (*power_on)(void);
+	void (*power_off)(void);
+	void (*reset)(void);
+};
+
+#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h
index 4f4085ef8..b53431e0a 100644
--- a/target/linux/generic/files/include/linux/switch.h
+++ b/target/linux/generic/files/include/linux/switch.h
@@ -13,86 +13,11 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+#ifndef _LINUX_SWITCH_H
+#define _LINUX_SWITCH_H
 
-#ifndef __LINUX_SWITCH_H
-#define __LINUX_SWITCH_H
-
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/netlink.h>
-#include <linux/genetlink.h>
-#ifndef __KERNEL__
-#include <netlink/netlink.h>
-#include <netlink/genl/genl.h>
-#include <netlink/genl/ctrl.h>
-#else
 #include <net/genetlink.h>
-#endif
-
-/* main attributes */
-enum {
-	SWITCH_ATTR_UNSPEC,
-	/* global */
-	SWITCH_ATTR_TYPE,
-	/* device */
-	SWITCH_ATTR_ID,
-	SWITCH_ATTR_DEV_NAME,
-	SWITCH_ATTR_ALIAS,
-	SWITCH_ATTR_NAME,
-	SWITCH_ATTR_VLANS,
-	SWITCH_ATTR_PORTS,
-	SWITCH_ATTR_CPU_PORT,
-	/* attributes */
-	SWITCH_ATTR_OP_ID,
-	SWITCH_ATTR_OP_TYPE,
-	SWITCH_ATTR_OP_NAME,
-	SWITCH_ATTR_OP_PORT,
-	SWITCH_ATTR_OP_VLAN,
-	SWITCH_ATTR_OP_VALUE_INT,
-	SWITCH_ATTR_OP_VALUE_STR,
-	SWITCH_ATTR_OP_VALUE_PORTS,
-	SWITCH_ATTR_OP_DESCRIPTION,
-	/* port lists */
-	SWITCH_ATTR_PORT,
-	SWITCH_ATTR_MAX
-};
-
-/* commands */
-enum {
-	SWITCH_CMD_UNSPEC,
-	SWITCH_CMD_GET_SWITCH,
-	SWITCH_CMD_NEW_ATTR,
-	SWITCH_CMD_LIST_GLOBAL,
-	SWITCH_CMD_GET_GLOBAL,
-	SWITCH_CMD_SET_GLOBAL,
-	SWITCH_CMD_LIST_PORT,
-	SWITCH_CMD_GET_PORT,
-	SWITCH_CMD_SET_PORT,
-	SWITCH_CMD_LIST_VLAN,
-	SWITCH_CMD_GET_VLAN,
-	SWITCH_CMD_SET_VLAN
-};
-
-/* data types */
-enum switch_val_type {
-	SWITCH_TYPE_UNSPEC,
-	SWITCH_TYPE_INT,
-	SWITCH_TYPE_STRING,
-	SWITCH_TYPE_PORTS,
-	SWITCH_TYPE_NOVAL,
-};
-
-/* port nested attributes */
-enum {
-	SWITCH_PORT_UNSPEC,
-	SWITCH_PORT_ID,
-	SWITCH_PORT_FLAG_TAGGED,
-	SWITCH_PORT_ATTR_MAX
-};
-
-#define SWITCH_ATTR_DEFAULTS_OFFSET	0x1000
-
-#ifdef __KERNEL__
+#include <uapi/linux/switch.h>
 
 struct switch_dev;
 struct switch_op;
@@ -173,6 +98,7 @@ struct switch_dev_ops {
 };
 
 struct switch_dev {
+	struct device_node *of_node;
 	const struct switch_dev_ops *ops;
 	/* will be automatically filled */
 	char devname[IFNAMSIZ];
@@ -193,6 +119,7 @@ struct switch_dev {
 
 	struct mutex sw_mutex;
 	struct switch_port *portbuf;
+	struct switch_portmap *portmap;
 
 	char buf[128];
 
@@ -206,6 +133,11 @@ struct switch_port {
 	u32 flags;
 };
 
+struct switch_portmap {
+	u32 virt;
+	const char *s;
+};
+
 struct switch_val {
 	const struct switch_attr *attr;
 	int port_vlan;
@@ -232,6 +164,4 @@ struct switch_attr {
 	int max;
 };
 
-#endif
-
-#endif
+#endif /* _LINUX_SWITCH_H */
diff --git a/target/linux/generic/files/include/uapi/linux/switch.h b/target/linux/generic/files/include/uapi/linux/switch.h
new file mode 100644
index 000000000..a59b23953
--- /dev/null
+++ b/target/linux/generic/files/include/uapi/linux/switch.h
@@ -0,0 +1,103 @@
+/*
+ * switch.h: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _UAPI_LINUX_SWITCH_H
+#define _UAPI_LINUX_SWITCH_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/genetlink.h>
+#ifndef __KERNEL__
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/ctrl.h>
+#endif
+
+/* main attributes */
+enum {
+	SWITCH_ATTR_UNSPEC,
+	/* global */
+	SWITCH_ATTR_TYPE,
+	/* device */
+	SWITCH_ATTR_ID,
+	SWITCH_ATTR_DEV_NAME,
+	SWITCH_ATTR_ALIAS,
+	SWITCH_ATTR_NAME,
+	SWITCH_ATTR_VLANS,
+	SWITCH_ATTR_PORTS,
+	SWITCH_ATTR_PORTMAP,
+	SWITCH_ATTR_CPU_PORT,
+	/* attributes */
+	SWITCH_ATTR_OP_ID,
+	SWITCH_ATTR_OP_TYPE,
+	SWITCH_ATTR_OP_NAME,
+	SWITCH_ATTR_OP_PORT,
+	SWITCH_ATTR_OP_VLAN,
+	SWITCH_ATTR_OP_VALUE_INT,
+	SWITCH_ATTR_OP_VALUE_STR,
+	SWITCH_ATTR_OP_VALUE_PORTS,
+	SWITCH_ATTR_OP_DESCRIPTION,
+	/* port lists */
+	SWITCH_ATTR_PORT,
+	SWITCH_ATTR_MAX
+};
+
+enum {
+	/* port map */
+	SWITCH_PORTMAP_PORTS,
+	SWITCH_PORTMAP_SEGMENT,
+	SWITCH_PORTMAP_VIRT,
+	SWITCH_PORTMAP_MAX
+};
+
+/* commands */
+enum {
+	SWITCH_CMD_UNSPEC,
+	SWITCH_CMD_GET_SWITCH,
+	SWITCH_CMD_NEW_ATTR,
+	SWITCH_CMD_LIST_GLOBAL,
+	SWITCH_CMD_GET_GLOBAL,
+	SWITCH_CMD_SET_GLOBAL,
+	SWITCH_CMD_LIST_PORT,
+	SWITCH_CMD_GET_PORT,
+	SWITCH_CMD_SET_PORT,
+	SWITCH_CMD_LIST_VLAN,
+	SWITCH_CMD_GET_VLAN,
+	SWITCH_CMD_SET_VLAN
+};
+
+/* data types */
+enum switch_val_type {
+	SWITCH_TYPE_UNSPEC,
+	SWITCH_TYPE_INT,
+	SWITCH_TYPE_STRING,
+	SWITCH_TYPE_PORTS,
+	SWITCH_TYPE_NOVAL,
+};
+
+/* port nested attributes */
+enum {
+	SWITCH_PORT_UNSPEC,
+	SWITCH_PORT_ID,
+	SWITCH_PORT_FLAG_TAGGED,
+	SWITCH_PORT_ATTR_MAX
+};
+
+#define SWITCH_ATTR_DEFAULTS_OFFSET	0x1000
+
+
+#endif /* _UAPI_LINUX_SWITCH_H */