diff options
Diffstat (limited to 'target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx')
25 files changed, 7801 insertions, 0 deletions
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig new file mode 100644 index 000000000..1418f4873 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig @@ -0,0 +1,138 @@ +# Kernel and Driver configuration for Broadcom Commengine ADSL board +choice + prompt "Broadcom Commengine ADSL board" + depends on BCM963XX + default BCM96348 + help + Select different Broadcom ADSL board + +config BCM96338 + bool "96338 ADSL board" + select DMA_NONCOHERENT + select HW_HAS_PCI + +config BCM96345 + bool "96345 ADSL board" + select DMA_NONCOHERENT + select HW_HAS_PCI + +config BCM96348 + bool "96348 ADSL board" + select DMA_NONCOHERENT + select HW_HAS_PCI + +endchoice + +config BCM_BOARD + bool "Support for Broadcom Board" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_SERIAL + bool "Support for Serial Port" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ENET + tristate "Support for Ethernet" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_USB + tristate "Support for USB" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_WLAN + tristate "Support for Wireless" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_PCI + bool "Support for PCI" + depends on BCM96338 || BCM96345 || BCM96348 + select PCI + +config BCM_ATMAPI + tristate "Support for ATM" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ATMTEST + tristate "Support for ATM Diagnostic" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ADSL + tristate "Support for ADSL" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ENDPOINT + tristate "Support for VOICE" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_PROCFS + tristate "Support for PROCFS" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_VDSL + tristate "Support for VDSL" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_SECURITY + tristate "Support for SECURITY" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_HPNA + tristate "Support for HPNA" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_BOARD_IMPL + int "Implementation index for ADSL Board" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_SERIAL_IMPL + int "Implementation index for Serial" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ENET_IMPL + int "Implementation index for Ethernet" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_USB_IMPL + int "Implementation index for USB" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_WLAN_IMPL + int "Implementation index for WIRELESS" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ATMAPI_IMPL + int "Implementation index for ATM" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ATMTEST_IMPL + int "Implementation index for ATM Diagnostic" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_BLAA_IMPL + int "Implementation index for BLAA" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ADSL_IMPL + int "Implementation index for ADSL" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_ENDPOINT_IMPL + int "Implementation index for VOICE" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_PROCFS_IMPL + int "Implementation index for PROCFS" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_VDSL_IMPL + int "Implementation index for VDSL" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_SECURITY_IMPL + int "Implementation index for SECURITY" + depends on BCM96338 || BCM96345 || BCM96348 + +config BCM_HPNA_IMPL + int "Implementation index for HPNA" + depends on BCM96338 || BCM96345 || BCM96348 + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile new file mode 100644 index 000000000..cf524fa64 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile @@ -0,0 +1,23 @@ +# +# Makefile for generic Broadcom MIPS boards +# +# Copyright (C) 2004 Broadcom Corporation +# +obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o + +SRCBASE := $(TOPDIR) +EXTRA_CFLAGS += -I$(SRCBASE)/include +#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG +EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) + + +ifeq "$(ADSL)" "ANNEX_B" +EXTRA_CFLAGS += -DADSL_ANNEXB +endif +ifeq "$(ADSL)" "SADSL" +EXTRA_CFLAGS += -DADSL_SADSL +endif +ifeq "$(ADSL)" "ANNEX_C" +EXTRA_CFLAGS += -DADSL_ANNEXC +endif + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c new file mode 100644 index 000000000..8de0f91db --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c @@ -0,0 +1,582 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/*************************************************************************** + * File Name : bcm63xx_led.c + * + * Description: + * + * This file contains bcm963xx board led control API functions. + * + * To use it, do the following + * + * 1). define in the board.c the following led mappping (this is for 6345GW board): + * const LED_MAP_PAIR cLedMapping45GW[] = + * { // led name Initial state physical pin (ledMask) + * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, + * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, + * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 + * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, + * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, + * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. + * + * 2). };To initialize led API and initial state of the leds, call the following function with the mapping + * pointer from the above struct + * + * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); + * + * 3). Sample call for kernel mode: + * + * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h + * + * 4). Sample call for user mode + * + * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h + * + * + * Created on : 10/28/2002 seanl + * + ***************************************************************************/ + +/* Includes. */ +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/capability.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <asm/uaccess.h> + +#include <bcm_map_part.h> +#include <board.h> + +#define k100ms (HZ / 10) // ~100 ms +#define kFastBlinkCount 0 // ~100ms +#define kSlowBlinkCount 5 // ~600ms + +#define MAX_VIRT_LEDS 12 + +// uncomment // for debug led +//#define DEBUG_LED + +// global variables: +struct timer_list gLedTimer; +int gTimerOn = FALSE; +int gLedCount = 0; + +typedef struct ledinfo +{ + unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 + unsigned short ledActiveLow; // GPIO bit reset to turn on LED + unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 + unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED + BOARD_LED_STATE ledState; // current led state + BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState + int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. +} LED_INFO, *PLED_INFO; + +static PLED_INFO gLed = NULL; +static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; +static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; +static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; + +#if 0 /* BROKEN */ +#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) +static int gLedOffInBridgeMode = 1; +#elif defined(CONFIG_BCM96345) +static int gLedOffInBridgeMode = 0; +#endif +#endif + +void ledTimerExpire(void); +int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); + +//************************************************************************************** +// LED operations +//************************************************************************************** + +// turn led on and set the ledState +void ledOn(PLED_INFO pLed) +{ + if( pLed->ledMask ) + { + GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one + if( pLed->ledActiveLow ) + GPIO->GPIOio &= ~pLed->ledMask; // turn on the led + else + GPIO->GPIOio |= pLed->ledMask; // turn on the led + pLed->ledState = pLed->savedLedState = kLedStateOn; + } +} + + +// turn led off and set the ledState +void ledOff(PLED_INFO pLed) +{ + if( pLed->ledMask ) + { + GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one + if( pLed->ledActiveLow ) + GPIO->GPIOio |= pLed->ledMask; // turn off the led + else + GPIO->GPIOio &= ~pLed->ledMask; // turn off the led + pLed->ledState = pLed->savedLedState = kLedStateOff; + } +} + +// turn led on and set the ledState +void ledOnFail(PLED_INFO pLed) +{ + if( pLed->ledMaskFail ) + { + GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one + if( pLed->ledActiveLowFail ) + GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led + else + GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led + pLed->ledState = pLed->savedLedState = kLedStateFail; + } +} + + +// turn led off and set the ledState +void ledOffFail(PLED_INFO pLed) +{ + if( pLed->ledMaskFail ) + { + GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one + if( pLed->ledActiveLowFail ) + GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led + else + GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led + pLed->ledState = pLed->savedLedState = kLedStateOff; + } +} + + +// toggle the led and return the current ledState +BOARD_LED_STATE ledToggle(PLED_INFO pLed) +{ + GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one + if (GPIO->GPIOio & pLed->ledMask) + { + GPIO->GPIOio &= ~(pLed->ledMask); + return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); + } + else + { + GPIO->GPIOio |= pLed->ledMask; + return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); + } +} + + +// led timer. Will return if timer is already on +void ledTimerStart(void) +{ + if (gTimerOn) + return; + +#if defined(DEBUG_LED) + printk("led: add_timer\n"); +#endif + + init_timer(&gLedTimer); + gLedTimer.function = (void*)ledTimerExpire; + gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms + add_timer (&gLedTimer); + gTimerOn = TRUE; +} + + +// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and +// restart the timer according to ledState +void ledTimerExpire(void) +{ + int i; + PLED_INFO pCurLed; + + gTimerOn = FALSE; + + for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) + { +#if defined(DEBUG_LED) + printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); +#endif + switch (pCurLed->ledState) + { + case kLedStateOn: + case kLedStateOff: + case kLedStateFail: + pCurLed->blinkCountDown = 0; // reset the blink count down + break; + + case kLedStateBlinkOnce: + ledToggle(pCurLed); + pCurLed->blinkCountDown = 0; // reset to 0 + pCurLed->ledState = pCurLed->savedLedState; + if (pCurLed->ledState == kLedStateSlowBlinkContinues || + pCurLed->ledState == kLedStateFastBlinkContinues) + ledTimerStart(); // start timer if in blinkContinues stats + break; + + case kLedStateSlowBlinkContinues: + if (pCurLed->blinkCountDown-- == 0) + { + pCurLed->blinkCountDown = kSlowBlinkCount; + ledToggle(pCurLed); + } + ledTimerStart(); + break; + + case kLedStateFastBlinkContinues: + if (pCurLed->blinkCountDown-- == 0) + { + pCurLed->blinkCountDown = kFastBlinkCount; + ledToggle(pCurLed); + } + ledTimerStart(); + break; + + default: + printk("Invalid state = %d\n", pCurLed->ledState); + } + } +} + +// initialize the gLedCount and allocate and fill gLed struct +void __init boardLedInit(PLED_MAP_PAIR cLedMapping) +{ + PLED_MAP_PAIR p1, p2; + PLED_INFO pCurLed; + int needTimer = FALSE; + int alreadyUsed = 0; + +#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) + /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ + GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; + GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; +#endif + + memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); + memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); + memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); + + gLedCount = 0; + + // Check for multiple LED names and multiple LED GPIO pins that share the + // same physical board LED. + for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) + { + alreadyUsed = 0; + for( p2 = cLedMapping; p2 != p1; p2++ ) + { + if( (p1->ledMask && p1->ledMask == p2->ledMask) || + (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) + { + alreadyUsed = 1; + break; + } + } + + if( alreadyUsed == 0 ) + gLedCount++; + } + + gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); + if( gLed == NULL ) + { + printk( "LED memory allocation error.\n" ); + return; + } + + memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); + + // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led + // (ledMask) the first defined led's ledInitState will be used. + pCurLed = gLed; + for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) + { + if( (int) p1->ledName > MAX_VIRT_LEDS ) + continue; + + alreadyUsed = 0; + for( p2 = cLedMapping; p2 != p1; p2++ ) + { + if( (p1->ledMask && p1->ledMask == p2->ledMask) || + (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) + { + alreadyUsed = 1; + break; + } + } + + if( alreadyUsed == 0 ) + { + // Initialize the board LED for the first time. + needTimer = initLedInfo( p1, pCurLed ); + gpVirtLeds[(int) p1->ledName] = pCurLed; + pCurLed++; + } + else + { + PLED_INFO pLed; + for( pLed = gLed; pLed != pCurLed; pLed++ ) + { + // Find the LED_INFO structure that has already been initialized. + if((pLed->ledMask && pLed->ledMask == p1->ledMask) || + (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) + { + // The board LED has already been initialized but possibly + // not completely initialized. + if( p1->ledMask ) + { + pLed->ledMask = p1->ledMask; + pLed->ledActiveLow = p1->ledActiveLow; + } + if( p1->ledMaskFail ) + { + pLed->ledMaskFail = p1->ledMaskFail; + pLed->ledActiveLowFail = p1->ledActiveLowFail; + } + gpVirtLeds[(int) p1->ledName] = pLed; + break; + } + } + } + } + + if (needTimer) + ledTimerStart(); + +#if defined(DEBUG_LED) + int i; + for (i=0; i < gLedCount; i++) + printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); +#endif + +} + +// Initialize a structure that contains information about a physical board LED +// control. The board LED may contain more than one GPIO pin to control a +// normal condition (green) or a failure condition (red). +int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) +{ + int needTimer = FALSE; + pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; + pCurLed->ledMask = pCurMap->ledMask; + pCurLed->ledActiveLow = pCurMap->ledActiveLow; + pCurLed->ledMaskFail = pCurMap->ledMaskFail; + pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; + + switch (pCurLed->ledState) + { + case kLedStateOn: + pCurLed->blinkCountDown = 0; // reset the blink count down + ledOn(pCurLed); + break; + case kLedStateOff: + pCurLed->blinkCountDown = 0; // reset the blink count down + ledOff(pCurLed); + break; + case kLedStateFail: + pCurLed->blinkCountDown = 0; // reset the blink count down + ledOnFail(pCurLed); + break; + case kLedStateBlinkOnce: + pCurLed->blinkCountDown = 1; + needTimer = TRUE; + break; + case kLedStateSlowBlinkContinues: + pCurLed->blinkCountDown = kSlowBlinkCount; + needTimer = TRUE; + break; + case kLedStateFastBlinkContinues: + pCurLed->blinkCountDown = kFastBlinkCount; + needTimer = TRUE; + break; + default: + printk("Invalid state = %d\n", pCurLed->ledState); + } + + return( needTimer ); +} + +#if 0 /* BROKEN */ +// Determines if there is at least one interface in bridge mode. Bridge mode +// is determined by the cfm convention of naming bridge interfaces nas17 +// through nas24. +static int isBridgedProtocol(void) +{ + extern int dev_get(const char *name); + const int firstBridgeId = 17; + const int lastBridgeId = 24; + int i; + int ret = FALSE; + char name[16]; + + for( i = firstBridgeId; i <= lastBridgeId; i++ ) + { + sprintf( name, "nas%d", i ); + + if( dev_get(name) ) + { + ret = TRUE; + break; + } + } + + return(ret); +} +#endif + +// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation +void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) +{ + PLED_INFO ledInfoPtr; + + // do the mapping from virtual to physical led + if( (int) ledName < MAX_VIRT_LEDS ) + ledInfoPtr = gpVirtLeds[(int) ledName]; + else + ledInfoPtr = NULL; + + if (ledInfoPtr == NULL) + return; + + if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) + { + (*gLedHwFunc[(int) ledName]) (ledName, ledState); + ledOffFail(ledInfoPtr); + return; + } + else + if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) + { + (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); + ledOff(ledInfoPtr); + return; + } + +#if 0 /* BROKEN */ + // Do not blink the WAN Data LED if at least one interface is in bridge mode. + if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) + { + static int BridgedProtocol = -1; + + if( BridgedProtocol == -1 ) + BridgedProtocol = isBridgedProtocol(); + + if( BridgedProtocol == TRUE ) + return; + } +#endif + + // If the state is kLedStateFail and there is not a failure LED defined + // in the board parameters, change the state to kLedStateFastBlinkContinues. + if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) + ledState = kLedStateFastBlinkContinues; + + switch (ledState) + { + case kLedStateOn: + // First, turn off the complimentary (failure) LED GPIO. + if( ledInfoPtr->ledMaskFail ) + ledOffFail(ledInfoPtr); + else + if( gLedHwFailFunc[(int) ledName] ) + (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); + + // Next, turn on the specified LED GPIO. + ledOn(ledInfoPtr); + break; + + case kLedStateOff: + // First, turn off the complimentary (failure) LED GPIO. + if( ledInfoPtr->ledMaskFail ) + ledOffFail(ledInfoPtr); + else + if( gLedHwFailFunc[(int) ledName] ) + (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); + + // Next, turn off the specified LED GPIO. + ledOff(ledInfoPtr); + break; + + case kLedStateFail: + // First, turn off the complimentary (normal) LED GPIO. + if( ledInfoPtr->ledMask ) + ledOff(ledInfoPtr); + else + if( gLedHwFunc[(int) ledName] ) + (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); + + // Next, turn on (red) the specified LED GPIO. + ledOnFail(ledInfoPtr); + break; + + case kLedStateBlinkOnce: + // skip blinkOnce if it is already in Slow/Fast blink continues state + if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || + ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) + ; + else + { + if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 + { + ledToggle(ledInfoPtr); + ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires + ledInfoPtr->ledState = kLedStateBlinkOnce; + ledTimerStart(); + } + } + break; + + case kLedStateSlowBlinkContinues: + ledInfoPtr->blinkCountDown = kSlowBlinkCount; + ledInfoPtr->ledState = kLedStateSlowBlinkContinues; + ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; + ledTimerStart(); + break; + + case kLedStateFastBlinkContinues: + ledInfoPtr->blinkCountDown = kFastBlinkCount; + ledInfoPtr->ledState = kLedStateFastBlinkContinues; + ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; + ledTimerStart(); + break; + + default: + printk("Invalid led state\n"); + } +} + +// This function is called for an LED that is controlled by hardware. +void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, + HANDLE_LED_FUNC ledHwFunc, int ledFailType ) +{ + if( (int) ledName < MAX_VIRT_LEDS ) + { + if( ledFailType == 1 ) + gLedHwFailFunc[(int) ledName] = ledHwFunc; + else + gLedHwFunc[(int) ledName] = ledHwFunc; + } +} + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c new file mode 100644 index 000000000..e54b96050 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c @@ -0,0 +1,559 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +/* Includes. */ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/capability.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <asm/uaccess.h> +#include <linux/wait.h> +#include <linux/poll.h> +#include <linux/sched.h> +#include <linux/list.h> +#include <linux/if.h> +#include <linux/spinlock.h> + +#include <bcm_map_part.h> +#include <board.h> +#include <bcmTag.h> +#include "boardparms.h" +#include "bcm_intr.h" +#include "board.h" +#include "bcm_map_part.h" + +static DEFINE_SPINLOCK(board_lock); + +/* Typedefs. */ +#if defined (NON_CONSECUTIVE_MAC) +// used to be the last octet. Now changed to the first 5 bits of the the forth octet +// to reduced the duplicated MAC addresses. +#define CHANGED_OCTET 3 +#define SHIFT_BITS 3 +#else +#define CHANGED_OCTET 1 +#define SHIFT_BITS 0 +#endif + +typedef struct +{ + unsigned long ulId; + char chInUse; + char chReserved[3]; +} MAC_ADDR_INFO, *PMAC_ADDR_INFO; + +typedef struct +{ + unsigned long ulSdramSize; + unsigned long ulPsiSize; + unsigned long ulNumMacAddrs; + unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; + MAC_ADDR_INFO MacAddrs[1]; +} NVRAM_INFO, *PNVRAM_INFO; + +typedef struct +{ + unsigned long eventmask; +} BOARD_IOC, *PBOARD_IOC; + + +/*Dyinggasp callback*/ +typedef void (*cb_dgasp_t)(void *arg); +typedef struct _CB_DGASP__LIST +{ + struct list_head list; + char name[IFNAMSIZ]; + cb_dgasp_t cb_dgasp_fn; + void *context; +}CB_DGASP_LIST , *PCB_DGASP_LIST; + + +static LED_MAP_PAIR LedMapping[] = +{ // led name Initial state physical pin (ledMask) + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0}, + {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. +}; + +/* Externs. */ +extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); +extern unsigned int nr_free_pages (void); +extern const char *get_system_type(void); +extern void kerSysFlashInit(void); +extern unsigned long get_nvram_start_addr(void); +extern unsigned long get_scratch_pad_start_addr(void); +extern unsigned long getMemorySize(void); +extern void __init boardLedInit(PLED_MAP_PAIR); +extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); +extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, + HANDLE_LED_FUNC ledHwFunc, int ledFailType ); + +/* Prototypes. */ +void __init InitNvramInfo( void ); + +/* DyingGasp function prototype */ +static void __init kerSysDyingGaspMapIntr(void); +static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id); +static void __init kerSysInitDyingGaspHandler( void ); +static void __exit kerSysDeinitDyingGaspHandler( void ); +/* -DyingGasp function prototype - */ + +static PNVRAM_INFO g_pNvramInfo = NULL; +static int g_ledInitialized = 0; +static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; + +static int g_wakeup_monitor = 0; +static struct file *g_monitor_file = NULL; +static struct task_struct *g_monitor_task = NULL; +static unsigned int (*g_orig_fop_poll) + (struct file *, struct poll_table_struct *) = NULL; + +void kerSysMipsSoftReset(void) +{ + if (PERF->RevID == 0x634800A1) { + typedef void (*FNPTR) (void); + FNPTR bootaddr = (FNPTR) FLASH_BASE; + int i; + + /* Disable interrupts. */ + //cli(); + spin_lock_irq(&board_lock); + + /* Reset all blocks. */ + PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; + for( i = 0; i < 1000000; i++ ) + ; + PERF->BlockSoftReset |= BSR_ALL_BLOCKS; + /* Jump to the power on address. */ + (*bootaddr) (); + } + else + PERF->pll_control |= SOFT_RESET; // soft reset mips +} + + +int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) +{ + int nRet = 0; + PMAC_ADDR_INFO pMai = NULL; + PMAC_ADDR_INFO pMaiFreeNoId = NULL; + PMAC_ADDR_INFO pMaiFreeId = NULL; + unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; + + /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas + * * à relire plusieurs fois */ + /* inv_xde */ +#if 0 + if (boot_loader_type == BOOT_CFE) + memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, + NVRAM_MAC_ADDRESS_LEN ); + else { +#endif + pucaMacAddr[0] = 0x00; + pucaMacAddr[1] = 0x07; + pucaMacAddr[2] = 0x3A; + pucaMacAddr[3] = 0xFF; + pucaMacAddr[4] = 0xFF; + pucaMacAddr[5] = 0xFF; +#if 0 + } +#endif + + return nRet; +} /* kerSysGetMacAddr */ + +int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) +{ + int nRet = -EINVAL; + unsigned long ulIdx = 0; + int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - + g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); + + // if overflow 255 (negitive), add 256 to have the correct index + if (idx < 0) + idx += 256; + ulIdx = (unsigned long) (idx >> SHIFT_BITS); + + if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) + { + PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; + if( pMai->chInUse == 1 ) + { + pMai->chInUse = 0; + nRet = 0; + } + } + + return( nRet ); +} /* kerSysReleaseMacAddr */ + +int kerSysGetSdramSize( void ) +{ + if (boot_loader_type == BOOT_CFE) { + return( (int) g_pNvramInfo->ulSdramSize ); + } + else { + printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000); + return((int)getMemorySize() + 0x00040000); + } +} /* kerSysGetSdramSize */ + + +void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) +{ + if (g_ledInitialized) + boardLedCtrl(ledName, ledState); +} + +unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) +{ + int mask = (*g_orig_fop_poll) (f, t); + + if( g_wakeup_monitor == 1 && g_monitor_file == f ) + { + /* If g_wakeup_monitor is non-0, the user mode application needs to + * return from a blocking select function. Return POLLPRI which will + * cause the select to return with the exception descriptor set. + */ + mask |= POLLPRI; + g_wakeup_monitor = 0; + } + + return( mask ); +} + +/* Put the user mode application that monitors link state on a run queue. */ +void kerSysWakeupMonitorTask( void ) +{ + g_wakeup_monitor = 1; + if( g_monitor_task ) + wake_up_process( g_monitor_task ); +} + +//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12 +int kerSysGetResetHold(void) +{ + unsigned short gpio; + + if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS ) + { + unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio); + volatile unsigned long *gpio_reg = &GPIO->GPIOio; + + if( (gpio & ~BP_ACTIVE_MASK) >= 32 ) + { + gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio); + gpio_reg = &GPIO->GPIOio_high; + } + //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg); + if(*gpio_reg & gpio_mask) //press down + return RESET_BUTTON_UP; + } + return RESET_BUTTON_PRESSDOWN; +} +//<<JUNHON, 2004/09/15 + +/*************************************************************************** + * Dying gasp ISR and functions. + ***************************************************************************/ +#define KERSYS_DBG printk + +#if defined(CONFIG_BCM96345) +#define CYCLE_PER_US 70 +#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) +/* The BCM6348 cycles per microsecond is really variable since the BCM6348 + * MIPS speed can vary depending on the PLL settings. However, an appoximate + * value of 120 will still work OK for the test being done. + */ +#define CYCLE_PER_US 120 +#endif +#define DG_GLITCH_TO (100*CYCLE_PER_US) + +static void __init kerSysDyingGaspMapIntr() +{ + unsigned long ulIntr; + +#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_) + if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { + BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG); + BcmHalInterruptEnable( INTERRUPT_ID_DG ); + } +#elif defined(CONFIG_BCM96345) || defined(_BCM96345_) + if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { + ulIntr += INTERRUPT_ID_EXTERNAL_0; + BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr); + BcmHalInterruptEnable( ulIntr ); + } +#endif + +} + +void kerSysSetWdTimer(ulong timeUs) +{ + TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000); + TIMER->WatchDogCtl = 0xFF00; + TIMER->WatchDogCtl = 0x00FF; +} + +ulong kerSysGetCycleCount(void) +{ + ulong cnt; +#ifdef _WIN32_WCE + cnt = 0; +#else + __asm volatile("mfc0 %0, $9":"=d"(cnt)); +#endif + return(cnt); +} + +static Bool kerSysDyingGaspCheckPowerLoss(void) +{ + ulong clk0; + ulong ulIntr; + + ulIntr = 0; + clk0 = kerSysGetCycleCount(); + + UART->Data = 'D'; + UART->Data = '%'; + UART->Data = 'G'; + +#if defined(CONFIG_BCM96345) + BpGetAdslDyingGaspExtIntr( &ulIntr ); + + do { + ulong clk1; + + clk1 = kerSysGetCycleCount(); /* time cleared */ + /* wait a little to get new reading */ + while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) + ; + } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); + + if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ + BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); + KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); + return 0; + } +#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) + do { + ulong clk1; + + clk1 = kerSysGetCycleCount(); /* time cleared */ + /* wait a little to get new reading */ + while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) + ; + } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); + + if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { + BcmHalInterruptEnable( INTERRUPT_ID_DG ); + KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); + return 0; + } +#endif + return 1; +} + +static void kerSysDyingGaspShutdown( void ) +{ + kerSysSetWdTimer(1000000); +#if defined(CONFIG_BCM96345) + PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); +#elif defined(CONFIG_BCM96348) + PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); +#endif +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) +static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id) +#else +static unsigned int kerSysDyingGaspIsr(void) +#endif +{ + struct list_head *pos; + CB_DGASP_LIST *tmp, *dsl = NULL; + + if (kerSysDyingGaspCheckPowerLoss()) { + + /* first to turn off everything other than dsl */ + list_for_each(pos, &g_cb_dgasp_list_head->list) { + tmp = list_entry(pos, CB_DGASP_LIST, list); + if(strncmp(tmp->name, "dsl", 3)) { + (tmp->cb_dgasp_fn)(tmp->context); + }else { + dsl = tmp; + } + } + + /* now send dgasp */ + if(dsl) + (dsl->cb_dgasp_fn)(dsl->context); + + /* reset and shutdown system */ + kerSysDyingGaspShutdown(); + } +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) +return( IRQ_HANDLED ); +#else + return( 1 ); +#endif +} + +static void __init kerSysInitDyingGaspHandler( void ) +{ + CB_DGASP_LIST *new_node; + + if( g_cb_dgasp_list_head != NULL) { + printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); + return; + } + new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); + memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); + INIT_LIST_HEAD(&new_node->list); + g_cb_dgasp_list_head = new_node; + +} /* kerSysInitDyingGaspHandler */ + +static void __exit kerSysDeinitDyingGaspHandler( void ) +{ + struct list_head *pos; + CB_DGASP_LIST *tmp; + + if(g_cb_dgasp_list_head == NULL) + return; + + list_for_each(pos, &g_cb_dgasp_list_head->list) { + tmp = list_entry(pos, CB_DGASP_LIST, list); + list_del(pos); + kfree(tmp); + } + + kfree(g_cb_dgasp_list_head); + g_cb_dgasp_list_head = NULL; + +} /* kerSysDeinitDyingGaspHandler */ + +void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) +{ + CB_DGASP_LIST *new_node; + + if( g_cb_dgasp_list_head == NULL) { + printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); + return; + } + + if( devname == NULL || cbfn == NULL ) { + printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); + return; + } + + new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); + memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); + INIT_LIST_HEAD(&new_node->list); + strncpy(new_node->name, devname, IFNAMSIZ); + new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; + new_node->context = context; + list_add(&new_node->list, &g_cb_dgasp_list_head->list); + + printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); + +} /* kerSysRegisterDyingGaspHandler */ + +void kerSysDeregisterDyingGaspHandler(char *devname) +{ + struct list_head *pos; + CB_DGASP_LIST *tmp; + + if(g_cb_dgasp_list_head == NULL) { + printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); + return; + } + + if(devname == NULL) { + printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); + return; + } + + printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); + + list_for_each(pos, &g_cb_dgasp_list_head->list) { + tmp = list_entry(pos, CB_DGASP_LIST, list); + if(!strcmp(tmp->name, devname)) { + list_del(pos); + kfree(tmp); + printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); + return; + } + } + printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); + +} /* kerSysDeregisterDyingGaspHandler */ + +//EXPORT_SYMBOL(kerSysNvRamGet); +EXPORT_SYMBOL(kerSysGetMacAddress); +EXPORT_SYMBOL(kerSysReleaseMacAddress); +EXPORT_SYMBOL(kerSysGetSdramSize); +EXPORT_SYMBOL(kerSysLedCtrl); +EXPORT_SYMBOL(kerSysGetResetHold); +EXPORT_SYMBOL(kerSysLedRegisterHwHandler); +EXPORT_SYMBOL(BpGetBoardIds); +EXPORT_SYMBOL(BpGetSdramSize); +EXPORT_SYMBOL(BpGetPsiSize); +EXPORT_SYMBOL(BpGetEthernetMacInfo); +EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); +EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); +EXPORT_SYMBOL(BpGetVoipResetGpio); +EXPORT_SYMBOL(BpGetVoipIntrGpio); +EXPORT_SYMBOL(BpGetPcmciaResetGpio); +EXPORT_SYMBOL(BpGetRtsCtsUartGpios); +EXPORT_SYMBOL(BpGetAdslLedGpio); +EXPORT_SYMBOL(BpGetAdslFailLedGpio); +EXPORT_SYMBOL(BpGetWirelessLedGpio); +EXPORT_SYMBOL(BpGetUsbLedGpio); +EXPORT_SYMBOL(BpGetHpnaLedGpio); +EXPORT_SYMBOL(BpGetWanDataLedGpio); +EXPORT_SYMBOL(BpGetPppLedGpio); +EXPORT_SYMBOL(BpGetPppFailLedGpio); +EXPORT_SYMBOL(BpGetVoipLedGpio); +EXPORT_SYMBOL(BpGetWirelessExtIntr); +EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); +EXPORT_SYMBOL(BpGetVoipExtIntr); +EXPORT_SYMBOL(BpGetHpnaExtIntr); +EXPORT_SYMBOL(BpGetHpnaChipSelect); +EXPORT_SYMBOL(BpGetVoipChipSelect); +EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); +EXPORT_SYMBOL(BpGetWirelessSesExtIntr); +EXPORT_SYMBOL(BpGetWirelessSesLedGpio); +EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); +EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); +EXPORT_SYMBOL(kerSysGetCycleCount); +EXPORT_SYMBOL(kerSysSetWdTimer); +EXPORT_SYMBOL(kerSysWakeupMonitorTask); + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c new file mode 100644 index 000000000..1143ded74 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c @@ -0,0 +1,2391 @@ +/* +<:copyright-gpl + + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + +:> +*/ +/************************************************************************** + * File Name : boardparms.c + * + * Description: This file contains the implementation for the BCM63xx board + * parameter access functions. + * + * Updates : 07/14/2003 Created. + ***************************************************************************/ + +/* Includes. */ +#include "boardparms.h" + +/* Defines. */ + +/* Default psi size in K bytes */ +#define BP_PSI_DEFAULT_SIZE 24 + +/* Typedefs */ +typedef struct boardparameters +{ + char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ + ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; + VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; + unsigned short usSdramSize; /* SDRAM size and type */ + unsigned short usPsiSize; /* persistent storage in K bytes */ + unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ + unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ + unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ + unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ + unsigned short usGpioUartRts; /* GPIO pin or not defined */ + unsigned short usGpioUartCts; /* GPIO pin or not defined */ + unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ + unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ + unsigned short usGpioLedWireless; /* GPIO pin or not defined */ + unsigned short usGpioLedUsb; /* GPIO pin or not defined */ + unsigned short usGpioLedHpna; /* GPIO pin or not defined */ + unsigned short usGpioLedWanData; /* GPIO pin or not defined */ + unsigned short usGpioLedPpp; /* GPIO pin or not defined */ + unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ + unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ + unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ + unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ + unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ + unsigned short usExtIntrWireless; /* ext intr or not defined */ + unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ + unsigned short usExtIntrHpna; /* ext intr or not defined */ + unsigned short usCsHpna; /* chip select not defined */ + unsigned short usAntInUseWireless; /* antenna in use or not defined */ + unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ + unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ + unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ +} BOARD_PARAMETERS, *PBOARD_PARAMETERS; + +/* Variables */ +#if defined(_BCM96338_) || defined(CONFIG_BCM96338) +static BOARD_PARAMETERS g_bcm96338sv = +{ + "96338SV", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_NOT_DEFINED, /* usGpioLedWanData */ + BP_NOT_DEFINED, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ + BP_NOT_DEFINED, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; +static BOARD_PARAMETERS g_bcm96338l2m8m = +{ + "96338L-2M-8M", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; +static PBOARD_PARAMETERS g_BoardParms[] = + {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; +#endif + +#if defined(_BCM96345_) || defined(CONFIG_BCM96345) +static BOARD_PARAMETERS g_bcm96345r = +{ + "96345R", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_GPIO_11_AH, /* usGpioRj11InnerPair */ + BP_GPIO_12_AH, /* usGpioRj11OuterPair */ + BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_GPIO_8_AH, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_8_AH, /* usGpioLedWanData */ + BP_GPIO_9_AH, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_GPIO_10_AH, /* usGpioLedBlAlarm */ + BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ + BP_GPIO_8_AH, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96345gw2 = +{ + /* A hardware jumper determines whether GPIO 13 is used for Press and Hold + * Reset or RTS. + */ + "96345GW2", /* szBoardId */ + {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_GPIO_0_AH, /* usGpioPhySpiSck */ + BP_GPIO_4_AH, /* usGpioPhySpiSs */ + BP_GPIO_12_AH, /* usGpioPhySpiMosi */ + BP_GPIO_11_AH, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x04, /* numSwitchPorts */ + BP_ENET_CONFIG_GPIO, /* usConfigType */ + BP_ENET_REVERSE_MII}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_DSP, /* ucDspType */ + 0x00, /* ucDspAddress */ + BP_EXT_INTR_1, /* usExtIntrVoip */ + BP_GPIO_6_AH, /* usGpioVoipReset */ + BP_GPIO_15_AH, /* usGpioVoipIntr */ + BP_NOT_DEFINED, /* usGpioLedVoip */ + BP_CS_2}, /* usCsVoip */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ + BP_GPIO_2_AH, /* usGpioPcmciaReset */ + BP_GPIO_13_AH, /* usGpioUartRts */ + BP_GPIO_9_AH, /* usGpioUartCts */ + BP_GPIO_8_AH, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_GPIO_7_AH, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_8_AH, /* usGpioLedWanData */ + BP_NOT_DEFINED, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_GPIO_10_AH, /* usGpioLedBlAlarm */ + BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ + BP_GPIO_8_AH, /* usGpioLedBlStop */ + BP_EXT_INTR_2, /* usExtIntrWireless */ + BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96345gw = +{ + "96345GW", /* szBoardId */ + {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x04, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_DSP, /* ucDspType */ + 0x00, /* ucDspAddress */ + BP_EXT_INTR_1, /* usExtIntrVoip */ + BP_GPIO_6_AH, /* usGpioVoipReset */ + BP_GPIO_15_AH, /* usGpioVoipIntr */ + BP_NOT_DEFINED, /* usGpioLedVoip */ + BP_CS_2}, /* usCsVoip */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_GPIO_11_AH, /* usGpioRj11InnerPair */ + BP_GPIO_1_AH, /* usGpioRj11OuterPair */ + BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ + BP_GPIO_2_AH, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_GPIO_8_AH, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_GPIO_10_AH, /* usGpioLedWireless */ + BP_GPIO_7_AH, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_8_AH, /* usGpioLedWanData */ + BP_NOT_DEFINED, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_GPIO_9_AH, /* usGpioLedBlAlarm */ + BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ + BP_GPIO_8_AH, /* usGpioLedBlStop */ + BP_EXT_INTR_2, /* usExtIntrWireless */ + BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ + BP_EXT_INTR_3, /* usExtIntrHpna */ + BP_CS_1, /* usCsHpna */ + BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96335r = +{ + "96335R", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_GPIO_9_AH, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_9_AH, /* usGpioLedWanData */ + BP_GPIO_8_AH, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_GPIO_10_AH, /* usGpioLedBlAlarm */ + BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ + BP_GPIO_9_AH, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96345r0 = +{ + "96345R0", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_GPIO_8_AH, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_9_AH, /* usGpioLedWanData */ + BP_GPIO_9_AH, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_GPIO_9_AH, /* usGpioLedBlAlarm */ + BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ + BP_GPIO_8_AH, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96345rs = +{ + "96345RS", /* szBoardId */ + {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_GPIO_11_AH, /* usGpioRj11InnerPair */ + BP_GPIO_12_AH, /* usGpioRj11OuterPair */ + BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_GPIO_8_AH, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_8_AH, /* usGpioLedWanData */ + BP_GPIO_9_AH, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_GPIO_10_AH, /* usGpioLedBlAlarm */ + BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ + BP_GPIO_8_AH, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static PBOARD_PARAMETERS g_BoardParms[] = + {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, + &g_bcm96345rs, 0}; +#endif + +#if defined(_BCM96348_) || defined(CONFIG_BCM96348) + +static BOARD_PARAMETERS g_bcm96348r = +{ + "96348R", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_NO_PHY}}, /* ucPhyType */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96348lv = +{ + "96348LV", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ + 0x02, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_GPIO_5_AL, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}}, /* usReverseMii */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96348gw = +{ + "96348GW", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x03, /* numSwitchPorts */ + BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ + BP_ENET_REVERSE_MII}}, /* usReverseMii */ + {{BP_VOIP_DSP, /* ucDspType */ + 0x00, /* ucDspAddress */ + BP_EXT_INTR_2, /* usExtIntrVoip */ + BP_GPIO_6_AH, /* usGpioVoipReset */ + BP_GPIO_34_AH, /* usGpioVoipIntr */ + BP_NOT_DEFINED, /* usGpioLedVoip */ + BP_CS_2}, /* usCsVoip */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ +}; + + +static BOARD_PARAMETERS g_bcm96348gw_10 = +{ + "96348GW-10", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x03, /* numSwitchPorts */ + BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ + BP_ENET_REVERSE_MII}}, /* usReverseMii */ + {{BP_VOIP_DSP, /* ucDspType */ + 0x00, /* ucDspAddress */ + BP_EXT_INTR_2, /* usExtIntrVoip */ + BP_GPIO_6_AH, /* usGpioVoipReset */ + BP_GPIO_34_AH, /* usGpioVoipIntr */ + BP_NOT_DEFINED, /* usGpioLedVoip */ + BP_CS_2}, /* usCsVoip */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96348gw_11 = +{ + "96348GW-11", /* szBoardId */ + {{BP_ENET_NO_PHY}, /* ucPhyType */ + {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x04, /* numSwitchPorts */ + BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ + BP_ENET_REVERSE_MII}}, /* usReverseMii */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static BOARD_PARAMETERS g_bcm96348sv = +{ + "96348SV", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ + 0x1f, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}}, /* usReverseMii */ + {{BP_VOIP_NO_DSP}, /* ucDspType */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_NOT_DEFINED, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_NOT_DEFINED, /* usGpioLedWanData */ + BP_NOT_DEFINED, /* usGpioLedPpp */ + BP_NOT_DEFINED, /* usGpioLedPppFail */ + BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ + BP_NOT_DEFINED, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + + +static BOARD_PARAMETERS g_bcm96348gw_dualDsp = +{ + "96348GW-DualDSP", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x03, /* numSwitchPorts */ + BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ + BP_ENET_REVERSE_MII}}, /* usReverseMii */ + {{BP_VOIP_DSP, /* ucDspType */ + 0x00, /* ucDspAddress */ + BP_EXT_INTR_2, /* usExtIntrVoip */ + BP_UNEQUIPPED, /* usGpioVoipReset */ + BP_GPIO_34_AH, /* usGpioVoipIntr */ + BP_NOT_DEFINED, /* usGpioLedVoip */ + BP_CS_2}, /* usCsVoip */ + {BP_VOIP_DSP, /* ucDspType */ + 0x01, /* ucDspAddress */ + BP_EXT_INTR_3, /* usExtIntrVoip */ + BP_UNEQUIPPED , /* usGpioVoipReset */ + BP_GPIO_35_AH, /* usGpioVoipIntr */ + BP_NOT_DEFINED, /* usGpioLedVoip */ + BP_CS_3}}, /* usCsVoip */ + BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + + +static BOARD_PARAMETERS g_bcmCustom_01 = +{ + "BCMCUST_01", /* szBoardId */ + {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ + 0x01, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_MDIO, /* usConfigType */ + BP_NOT_DEFINED}, /* usReverseMii */ + {BP_ENET_NO_PHY, /* ucPhyType */ + 0x00, /* ucPhyAddress */ + BP_NOT_DEFINED, /* usGpioPhySpiSck */ + BP_NOT_DEFINED, /* usGpioPhySpiSs */ + BP_NOT_DEFINED, /* usGpioPhySpiMosi */ + BP_NOT_DEFINED, /* usGpioPhySpiMiso */ + BP_NOT_DEFINED, /* usGpioPhyReset */ + 0x01, /* numSwitchPorts */ + BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ + BP_ENET_REVERSE_MII}}, /* usReverseMii */ + {{BP_VOIP_DSP, /* ucDspType */ + 0x00, /* ucDspAddress */ + BP_EXT_INTR_2, /* usExtIntrVoip */ + BP_GPIO_36_AH, /* usGpioVoipReset */ + BP_GPIO_34_AL, /* usGpioVoipIntr */ + BP_NOT_DEFINED, /* usGpioLedVoip */ + BP_CS_2}, /* usCsVoip */ + {BP_VOIP_NO_DSP}}, /* ucDspType */ + BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ + BP_PSI_DEFAULT_SIZE, /* usPsiSize */ + BP_NOT_DEFINED, /* usGpioRj11InnerPair */ + BP_NOT_DEFINED, /* usGpioRj11OuterPair */ + BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ + BP_NOT_DEFINED, /* usGpioPcmciaReset */ + BP_NOT_DEFINED, /* usGpioUartRts */ + BP_NOT_DEFINED, /* usGpioUartCts */ + BP_NOT_DEFINED, /* usGpioLedAdsl */ + BP_GPIO_2_AL, /* usGpioLedAdslFail */ + BP_NOT_DEFINED, /* usGpioLedWireless */ + BP_NOT_DEFINED, /* usGpioLedUsb */ + BP_NOT_DEFINED, /* usGpioLedHpna */ + BP_GPIO_3_AL, /* usGpioLedWanData */ + BP_GPIO_3_AL, /* usGpioLedPpp */ + BP_GPIO_4_AL, /* usGpioLedPppFail */ + BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ + BP_NOT_DEFINED, /* usGpioLedBlAlarm */ + BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ + BP_GPIO_1_AL, /* usGpioLedBlStop */ + BP_NOT_DEFINED, /* usExtIntrWireless */ + BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ + BP_NOT_DEFINED, /* usExtIntrHpna */ + BP_NOT_DEFINED, /* usCsHpna */ + BP_NOT_DEFINED, /* usAntInUseWireless */ + BP_NOT_DEFINED, /* usGpioSesBtnWireless */ + BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ + BP_NOT_DEFINED /* usGpioLedSesWireless */ +}; + +static PBOARD_PARAMETERS g_BoardParms[] = + {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, + &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, + &g_bcmCustom_01, 0}; +#endif + +static PBOARD_PARAMETERS g_pCurrentBp = 0; + +/************************************************************************** + * Name : bpstrcmp + * + * Description: String compare for this file so it does not depend on an OS. + * (Linux kernel and CFE share this source file.) + * + * Parameters : [IN] dest - destination string + * [IN] src - source string + * + * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src + ***************************************************************************/ +static int bpstrcmp(const char *dest,const char *src); +static int bpstrcmp(const char *dest,const char *src) +{ + while (*src && *dest) + { + if (*dest < *src) return -1; + if (*dest > *src) return 1; + dest++; + src++; + } + + if (*dest && !*src) return 1; + if (!*dest && *src) return -1; + return 0; +} /* bpstrcmp */ + +/************************************************************************** + * Name : BpGetVoipDspConfig + * + * Description: Gets the DSP configuration from the board parameter + * structure for a given DSP index. + * + * Parameters : [IN] dspNum - DSP index (number) + * + * Returns : Pointer to DSP configuration block if found/valid, NULL + * otherwise. + ***************************************************************************/ +VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); +VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) +{ + VOIP_DSP_INFO *pDspConfig = 0; + int i; + + if( g_pCurrentBp ) + { + for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) + { + if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && + g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) + { + pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; + break; + } + } + } + + return pDspConfig; +} + + +/************************************************************************** + * Name : BpSetBoardId + * + * Description: This function find the BOARD_PARAMETERS structure for the + * specified board id string and assigns it to a global, static + * variable. + * + * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not + * have a board parameters configuration record. + ***************************************************************************/ +int BpSetBoardId( char *pszBoardId ) +{ + int nRet = BP_BOARD_ID_NOT_FOUND; + PBOARD_PARAMETERS *ppBp; + + for( ppBp = g_BoardParms; *ppBp; ppBp++ ) + { + if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) + { + g_pCurrentBp = *ppBp; + nRet = BP_SUCCESS; + break; + } + } + + return( nRet ); +} /* BpSetBoardId */ + +/************************************************************************** + * Name : BpGetBoardIds + * + * Description: This function returns all of the supported board id strings. + * + * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id + * strings are returned in. Each id starts at BP_BOARD_ID_LEN + * boundary. + * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that + * were allocated in pszBoardIds. + * + * Returns : Number of board id strings returned. + ***************************************************************************/ +int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) +{ + PBOARD_PARAMETERS *ppBp; + int i; + char *src; + char *dest; + + for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; + i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) + { + dest = pszBoardIds; + src = (*ppBp)->szBoardId; + while( *src ) + *dest++ = *src++; + *dest = '\0'; + } + + return( i ); +} /* BpGetBoardIds */ + +/************************************************************************** + * Name : BpGetEthernetMacInfo + * + * Description: This function returns all of the supported board id strings. + * + * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO + * buffers. + * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that + * are pointed to by pEnetInfos. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) +{ + int i, nRet; + + if( g_pCurrentBp ) + { + for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) + { + if( i < BP_MAX_ENET_MACS ) + { + unsigned char *src = (unsigned char *) + &g_pCurrentBp->EnetMacInfos[i]; + unsigned char *dest = (unsigned char *) pEnetInfos; + int len = sizeof(ETHERNET_MAC_INFO); + while( len-- ) + *dest++ = *src++; + } + else + pEnetInfos->ucPhyType = BP_ENET_NO_PHY; + } + + nRet = BP_SUCCESS; + } + else + { + for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) + pEnetInfos->ucPhyType = BP_ENET_NO_PHY; + + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetEthernetMacInfo */ + +/************************************************************************** + * Name : BpGetSdramSize + * + * Description: This function returns a constant that describees the board's + * SDRAM type and size. + * + * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size + * is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetSdramSize( unsigned long *pulSdramSize ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pulSdramSize = g_pCurrentBp->usSdramSize; + nRet = BP_SUCCESS; + } + else + { + *pulSdramSize = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetSdramSize */ + +/************************************************************************** + * Name : BpGetPsiSize + * + * Description: This function returns the persistent storage size in K bytes. + * + * Parameters : [OUT] pulPsiSize - Address of short word that the persistent + * storage size is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetPsiSize( unsigned long *pulPsiSize ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pulPsiSize = g_pCurrentBp->usPsiSize; + nRet = BP_SUCCESS; + } + else + { + *pulPsiSize = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetPsiSize */ + +/************************************************************************** + * Name : BpGetRj11InnerOuterPairGpios + * + * Description: This function returns the GPIO pin assignments for changing + * between the RJ11 inner pair and RJ11 outer pair. + * + * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair + * GPIO pin is returned in. + * [OUT] pusOuter - Address of short word that the RJ11 outer pair + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, values are returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, + unsigned short *pusOuter ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusInner = g_pCurrentBp->usGpioRj11InnerPair; + *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; + + if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && + g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusInner = *pusOuter = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetRj11InnerOuterPairGpios */ + +/************************************************************************** + * Name : BpGetPressAndHoldResetGpio + * + * Description: This function returns the GPIO pin assignment for the press + * and hold reset button. + * + * Parameters : [OUT] pusValue - Address of short word that the press and hold + * reset button GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; + + if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetPressAndHoldResetGpio */ + +/************************************************************************** + * Name : BpGetVoipResetGpio + * + * Description: This function returns the GPIO pin assignment for the VOIP + * Reset operation. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP reset + * GPIO pin is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); + + if( pDspInfo ) + { + *pusValue = pDspInfo->usGpioVoipReset; + + if( *pusValue != BP_NOT_DEFINED || + *pusValue == BP_UNEQUIPPED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_FOUND; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetVoipResetGpio */ + +/************************************************************************** + * Name : BpGetVoipIntrGpio + * + * Description: This function returns the GPIO pin assignment for VoIP interrupt. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt + * GPIO pin is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); + + if( pDspInfo ) + { + *pusValue = pDspInfo->usGpioVoipIntr; + + if( *pusValue != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_FOUND; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetVoipIntrGpio */ + +/************************************************************************** + * Name : BpGetPcmciaResetGpio + * + * Description: This function returns the GPIO pin assignment for the PCMCIA + * Reset operation. + * + * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPcmciaResetGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioPcmciaReset; + + if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetPcmciaResetGpio */ + +/************************************************************************** + * Name : BpGetUartRtsCtsGpios + * + * Description: This function returns the GPIO pin assignments for RTS and CTS + * UART signals. + * + * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO + * pin is returned in. + * [OUT] pusCts - Address of short word that the UART CTS GPIO + * pin is returned in. + * + * Returns : BP_SUCCESS - Success, values are returned. + * BP_BOARD_ID_NOT_SET - Error, board id input string does not + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusRts = g_pCurrentBp->usGpioUartRts; + *pusCts = g_pCurrentBp->usGpioUartCts; + + if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && + g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusRts = *pusCts = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetUartRtsCtsGpios */ + +/************************************************************************** + * Name : BpGetAdslLedGpio + * + * Description: This function returns the GPIO pin assignment for the ADSL + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the ADSL LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedAdsl; + + if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetAdslLedGpio */ + +/************************************************************************** + * Name : BpGetAdslFailLedGpio + * + * Description: This function returns the GPIO pin assignment for the ADSL + * LED that is used when there is a DSL connection failure. + * + * Parameters : [OUT] pusValue - Address of short word that the ADSL LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslFailLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedAdslFail; + + if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetAdslFailLedGpio */ + +/************************************************************************** + * Name : BpGetWirelessLedGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedWireless; + + if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetWirelessLedGpio */ + +/************************************************************************** + * Name : BpGetWirelessAntInUse + * + * Description: This function returns the antennas in use for wireless + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna + * is in use. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessAntInUse( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usAntInUseWireless; + + if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetWirelessAntInUse */ + +/************************************************************************** + * Name : BpGetWirelessSesBtnGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * Ses Button. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioSesBtnWireless; + + if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetWirelessSesBtnGpio */ + +/************************************************************************** + * Name : BpGetWirelessSesExtIntr + * + * Description: This function returns the external interrupt number for the + * Wireless Ses Button. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * external interrup is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesExtIntr( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; + + if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); + +} /* BpGetWirelessSesExtIntr */ + +/************************************************************************** + * Name : BpGetWirelessSesLedGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * Ses Led. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * Led GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedSesWireless; + + if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); + +} /* BpGetWirelessSesLedGpio */ + +/************************************************************************** + * Name : BpGetUsbLedGpio + * + * Description: This function returns the GPIO pin assignment for the USB + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the USB LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetUsbLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedUsb; + + if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetUsbLedGpio */ + +/************************************************************************** + * Name : BpGetHpnaLedGpio + * + * Description: This function returns the GPIO pin assignment for the HPNA + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the HPNA LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedHpna; + + if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetHpnaLedGpio */ + +/************************************************************************** + * Name : BpGetWanDataLedGpio + * + * Description: This function returns the GPIO pin assignment for the WAN Data + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWanDataLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedWanData; + + if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetWanDataLedGpio */ + +/************************************************************************** + * Name : BpGetPppLedGpio + * + * Description: This function returns the GPIO pin assignment for the PPP + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the PPP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPppLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedPpp; + + if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetPppLedGpio */ + +/************************************************************************** + * Name : BpGetPppFailLedGpio + * + * Description: This function returns the GPIO pin assignment for the PPP + * LED that is used when there is a PPP connection failure. + * + * Parameters : [OUT] pusValue - Address of short word that the PPP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPppFailLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedPppFail; + + if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetPppFailLedGpio */ + +/************************************************************************** + * Name : BpGetBootloaderPowerOnLedGpio + * + * Description: This function returns the GPIO pin assignment for the power + * on LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the alarm LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; + + if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetBootloaderPowerOn */ + +/************************************************************************** + * Name : BpGetBootloaderAlarmLedGpio + * + * Description: This function returns the GPIO pin assignment for the alarm + * LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the alarm LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedBlAlarm; + + if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetBootloaderAlarmLedGpio */ + +/************************************************************************** + * Name : BpGetBootloaderResetCfgLedGpio + * + * Description: This function returns the GPIO pin assignment for the reset + * configuration LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the reset + * configuration LED GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; + + if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetBootloaderResetCfgLedGpio */ + +/************************************************************************** + * Name : BpGetBootloaderStopLedGpio + * + * Description: This function returns the GPIO pin assignment for the break + * into bootloader LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the break into + * bootloader LED GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pusValue = g_pCurrentBp->usGpioLedBlStop; + + if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetBootloaderStopLedGpio */ + +/************************************************************************** + * Name : BpGetVoipLedGpio + * + * Description: This function returns the GPIO pin assignment for the VOIP + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + * + * Note : The VoIP structure would allow for having one LED per DSP + * however, the board initialization function assumes only one + * LED per functionality (ie one LED for VoIP). Therefore in + * order to keep this tidy and simple we do not make usage of the + * one-LED-per-DSP function. Instead, we assume that the LED for + * VoIP is unique and associated with DSP 0 (always present on + * any VoIP platform). If changing this to a LED-per-DSP function + * then one need to update the board initialization driver in + * bcmdrivers\opensource\char\board\bcm963xx\impl1 + ***************************************************************************/ +int BpGetVoipLedGpio( unsigned short *pusValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); + + if( pDspInfo ) + { + *pusValue = pDspInfo->usGpioLedVoip; + + if( *pusValue != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_FOUND; + } + } + else + { + *pusValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetVoipLedGpio */ + +/************************************************************************** + * Name : BpGetWirelessExtIntr + * + * Description: This function returns the Wireless external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the wireless + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessExtIntr( unsigned long *pulValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pulValue = g_pCurrentBp->usExtIntrWireless; + + if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetWirelessExtIntr */ + +/************************************************************************** + * Name : BpGetAdslDyingGaspExtIntr + * + * Description: This function returns the ADSL Dying Gasp external interrupt + * number. + * + * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; + + if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetAdslDyingGaspExtIntr */ + +/************************************************************************** + * Name : BpGetVoipExtIntr + * + * Description: This function returns the VOIP external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the VOIP + * external interrupt number is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); + + if( pDspInfo ) + { + *pulValue = pDspInfo->usExtIntrVoip; + + if( *pulValue != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_FOUND; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetVoipExtIntr */ + +/************************************************************************** + * Name : BpGetHpnaExtIntr + * + * Description: This function returns the HPNA external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the HPNA + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaExtIntr( unsigned long *pulValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pulValue = g_pCurrentBp->usExtIntrHpna; + + if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetHpnaExtIntr */ + +/************************************************************************** + * Name : BpGetHpnaChipSelect + * + * Description: This function returns the HPNA chip select number. + * + * Parameters : [OUT] pulValue - Address of short word that the HPNA + * chip select number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaChipSelect( unsigned long *pulValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + *pulValue = g_pCurrentBp->usCsHpna; + + if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetHpnaChipSelect */ + +/************************************************************************** + * Name : BpGetVoipChipSelect + * + * Description: This function returns the VOIP chip select number. + * + * Parameters : [OUT] pulValue - Address of short word that the VOIP + * chip select number is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) +{ + int nRet; + + if( g_pCurrentBp ) + { + VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); + + if( pDspInfo ) + { + *pulValue = pDspInfo->usCsVoip; + + if( *pulValue != BP_NOT_DEFINED ) + { + nRet = BP_SUCCESS; + } + else + { + nRet = BP_VALUE_NOT_DEFINED; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_FOUND; + } + } + else + { + *pulValue = BP_NOT_DEFINED; + nRet = BP_BOARD_ID_NOT_SET; + } + + return( nRet ); +} /* BpGetVoipChipSelect */ + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h new file mode 100644 index 000000000..08ba24cca --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h @@ -0,0 +1,758 @@ +/* +<:copyright-gpl + + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + +:> +*/ +/************************************************************************** + * File Name : boardparms.h + * + * Description: This file contains definitions and function prototypes for + * the BCM63xx board parameter access functions. + * + * Updates : 07/14/2003 Created. + ***************************************************************************/ + +#if !defined(_BOARDPARMS_H) +#define _BOARDPARMS_H + +/* Return codes. */ +#define BP_SUCCESS 0 +#define BP_BOARD_ID_NOT_FOUND 1 +#define BP_VALUE_NOT_DEFINED 2 +#define BP_BOARD_ID_NOT_SET 3 + +/* Values for BpGetSdramSize. */ +#define BP_MEMORY_8MB_1_CHIP 0 +#define BP_MEMORY_16MB_1_CHIP 1 +#define BP_MEMORY_32MB_1_CHIP 2 +#define BP_MEMORY_64MB_2_CHIP 3 +#define BP_MEMORY_32MB_2_CHIP 4 +#define BP_MEMORY_16MB_2_CHIP 5 + +/* Values for EthernetMacInfo PhyType. */ +#define BP_ENET_NO_PHY 0 +#define BP_ENET_INTERNAL_PHY 1 +#define BP_ENET_EXTERNAL_PHY 2 +#define BP_ENET_EXTERNAL_SWITCH 3 + +/* Values for EthernetMacInfo Configuration type. */ +#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ +#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ +#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ + +/* Values for EthernetMacInfo Reverse MII. */ +#define BP_ENET_NO_REVERSE_MII 0 +#define BP_ENET_REVERSE_MII 1 + +/* Values for VoIPDSPInfo DSPType. */ +#define BP_VOIP_NO_DSP 0 +#define BP_VOIP_DSP 1 + + +/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ +#define BP_ACTIVE_MASK 0x8000 +#define BP_ACTIVE_HIGH 0x0000 +#define BP_ACTIVE_LOW 0x8000 +#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) +#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) +#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) +#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) +#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) +#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) +#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) +#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) +#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) +#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) +#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) +#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) +#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) +#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) +#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) +#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) +#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) +#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) +#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) +#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) +#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) +#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) +#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) +#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) +#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) +#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) +#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) +#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) +#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) +#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) +#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) +#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) +#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) +#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) +#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) +#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) +#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) +#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) +#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) +#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) +#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) +#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) +#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) +#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) +#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) +#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) +#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) +#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) +#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) +#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) +#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) +#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) +#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) +#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) +#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) +#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) +#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) +#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) +#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) +#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) +#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) +#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) +#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) +#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) +#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) +#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) +#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) +#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) +#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) +#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) +#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) +#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) +#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) +#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) + +/* Values for external interrupt assignments. */ +#define BP_EXT_INTR_0 0 +#define BP_EXT_INTR_1 1 +#define BP_EXT_INTR_2 2 +#define BP_EXT_INTR_3 3 + +/* Values for chip select assignments. */ +#define BP_CS_0 0 +#define BP_CS_1 1 +#define BP_CS_2 2 +#define BP_CS_3 3 + +/* Value for GPIO and external interrupt fields that are not used. */ +#define BP_NOT_DEFINED 0xffff +#define BP_HW_DEFINED 0xfff0 +#define BP_UNEQUIPPED 0xfff1 + +/* Maximum size of the board id string. */ +#define BP_BOARD_ID_LEN 16 + +/* Maximum number of Ethernet MACs. */ +#define BP_MAX_ENET_MACS 2 + +/* Maximum number of VoIP DSPs. */ +#define BP_MAX_VOIP_DSP 2 + +/* Wireless Antenna Settings. */ +#define BP_WLAN_ANT_MAIN 0 +#define BP_WLAN_ANT_AUX 1 +#define BP_WLAN_ANT_BOTH 3 + +#if !defined(__ASSEMBLER__) + +/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, + * then the other fields are not valid. + */ +typedef struct EthernetMacInfo +{ + unsigned char ucPhyType; /* BP_ENET_xxx */ + unsigned char ucPhyAddress; /* 0 to 31 */ + unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ + unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ + unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ + unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ + unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ + unsigned short numSwitchPorts; /* Number of PHY ports */ + unsigned short usConfigType; /* Configuration type */ + unsigned short usReverseMii; /* Reverse MII */ +} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; + + +/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, + * then the other fields are not valid. + */ +typedef struct VoIPDspInfo +{ + unsigned char ucDspType; + unsigned char ucDspAddress; + unsigned short usExtIntrVoip; + unsigned short usGpioVoipReset; + unsigned short usGpioVoipIntr; + unsigned short usGpioLedVoip; + unsigned short usCsVoip; + +} VOIP_DSP_INFO; + + +/************************************************************************** + * Name : BpSetBoardId + * + * Description: This function find the BOARD_PARAMETERS structure for the + * specified board id string and assigns it to a global, static + * variable. + * + * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not + * have a board parameters configuration record. + ***************************************************************************/ +int BpSetBoardId( char *pszBoardId ); + +/************************************************************************** + * Name : BpGetBoardIds + * + * Description: This function returns all of the supported board id strings. + * + * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id + * strings are returned in. Each id starts at BP_BOARD_ID_LEN + * boundary. + * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that + * were allocated in pszBoardIds. + * + * Returns : Number of board id strings returned. + ***************************************************************************/ +int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); + +/************************************************************************** + * Name : BpGetEthernetMacInfo + * + * Description: This function returns all of the supported board id strings. + * + * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO + * buffers. + * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that + * are pointed to by pEnetInfos. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); + +/************************************************************************** + * Name : BpGetSdramSize + * + * Description: This function returns a constant that describees the board's + * SDRAM type and size. + * + * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size + * is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetSdramSize( unsigned long *pulSdramSize ); + +/************************************************************************** + * Name : BpGetPsiSize + * + * Description: This function returns the persistent storage size in K bytes. + * + * Parameters : [OUT] pulPsiSize - Address of short word that the persistent + * storage size is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetPsiSize( unsigned long *pulPsiSize ); + +/************************************************************************** + * Name : BpGetRj11InnerOuterPairGpios + * + * Description: This function returns the GPIO pin assignments for changing + * between the RJ11 inner pair and RJ11 outer pair. + * + * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair + * GPIO pin is returned in. + * [OUT] pusOuter - Address of short word that the RJ11 outer pair + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, values are returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, + unsigned short *pusOuter ); + +/************************************************************************** + * Name : BpGetPressAndHoldResetGpio + * + * Description: This function returns the GPIO pin assignment for the press + * and hold reset button. + * + * Parameters : [OUT] pusValue - Address of short word that the press and hold + * reset button GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetVoipResetGpio + * + * Description: This function returns the GPIO pin assignment for the VOIP + * Reset operation. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP reset + * GPIO pin is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetVoipIntrGpio + * + * Description: This function returns the GPIO pin assignment for VoIP interrupt. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt + * GPIO pin is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetPcmciaResetGpio + * + * Description: This function returns the GPIO pin assignment for the PCMCIA + * Reset operation. + * + * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPcmciaResetGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetUartRtsCtsGpios + * + * Description: This function returns the GPIO pin assignments for RTS and CTS + * UART signals. + * + * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO + * pin is returned in. + * [OUT] pusCts - Address of short word that the UART CTS GPIO + * pin is returned in. + * + * Returns : BP_SUCCESS - Success, values are returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); + +/************************************************************************** + * Name : BpGetAdslLedGpio + * + * Description: This function returns the GPIO pin assignment for the ADSL + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the ADSL LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetAdslFailLedGpio + * + * Description: This function returns the GPIO pin assignment for the ADSL + * LED that is used when there is a DSL connection failure. + * + * Parameters : [OUT] pusValue - Address of short word that the ADSL LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslFailLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessLedGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessAntInUse + * + * Description: This function returns the antennas in use for wireless + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna + * is in use. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessAntInUse( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessSesBtnGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * Ses Button. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * Button GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessSesExtIntr + * + * Description: This function returns the external interrupt number for the + * Wireless Ses Button. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * external interrup is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesExtIntr( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessSesLedGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * Ses Led. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * Led GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetUsbLedGpio + * + * Description: This function returns the GPIO pin assignment for the USB + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the USB LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetUsbLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetHpnaLedGpio + * + * Description: This function returns the GPIO pin assignment for the HPNA + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the HPNA LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWanDataLedGpio + * + * Description: This function returns the GPIO pin assignment for the WAN Data + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWanDataLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetPppLedGpio + * + * Description: This function returns the GPIO pin assignment for the PPP + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the PPP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPppLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetPppFailLedGpio + * + * Description: This function returns the GPIO pin assignment for the PPP + * LED that is used when there is a PPP connection failure. + * + * Parameters : [OUT] pusValue - Address of short word that the PPP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPppFailLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetVoipLedGpio + * + * Description: This function returns the GPIO pin assignment for the VOIP + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderPowerOnLedGpio + * + * Description: This function returns the GPIO pin assignment for the power + * on LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the alarm LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderAlarmLedGpio + * + * Description: This function returns the GPIO pin assignment for the alarm + * LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the alarm LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderResetCfgLedGpio + * + * Description: This function returns the GPIO pin assignment for the reset + * configuration LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the reset + * configuration LED GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderStopLedGpio + * + * Description: This function returns the GPIO pin assignment for the break + * into bootloader LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the break into + * bootloader LED GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessExtIntr + * + * Description: This function returns the Wireless external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the wireless + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessExtIntr( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetAdslDyingGaspExtIntr + * + * Description: This function returns the ADSL Dying Gasp external interrupt + * number. + * + * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetVoipExtIntr + * + * Description: This function returns the VOIP external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the VOIP + * external interrupt number is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetHpnaExtIntr + * + * Description: This function returns the HPNA external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the HPNA + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaExtIntr( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetHpnaChipSelect + * + * Description: This function returns the HPNA chip select number. + * + * Parameters : [OUT] pulValue - Address of short word that the HPNA + * chip select number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaChipSelect( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetVoipChipSelect + * + * Description: This function returns the VOIP chip select number. + * + * Parameters : [OUT] pulValue - Address of short word that the VOIP + * chip select number is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); + +#endif /* __ASSEMBLER__ */ + +#endif /* _BOARDPARMS_H */ + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h new file mode 100644 index 000000000..3a6e00a2a --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h @@ -0,0 +1,64 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __6338_INTR_H +#define __6338_INTR_H + +/*=====================================================================*/ +/* BCM6338 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6338 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) +#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) +#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) +#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) +#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) +#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) +#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) +#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) +#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) +#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) +#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) + +#endif /* __BCM6338_H */ + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h new file mode 100644 index 000000000..70bf80734 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h @@ -0,0 +1,334 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6338_MAP_H +#define __BCM6338_MAP_H + +#include "bcmtypes.h" + +#define PERF_BASE 0xfffe0000 +#define TIMR_BASE 0xfffe0200 +#define UART_BASE 0xfffe0300 +#define GPIO_BASE 0xfffe0400 +#define SPI_BASE 0xfffe0c00 + +typedef struct PerfControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define EMAC_CLK_EN 0x0010 +#define USBS_CLK_EN 0x0010 +#define SAR_CLK_EN 0x0020 + +#define SPI_CLK_EN 0x0200 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 5 +#define EI_CLEAR_SHFT 10 +#define EI_MASK_SHFT 15 +#define EI_INSENS_SHFT 20 +#define EI_LEVEL_SHFT 25 + + uint32 unused[4]; /* (18) */ + uint32 BlockSoftReset; /* (28) */ +#define BSR_SPI 0x00000001 +#define BSR_EMAC 0x00000004 +#define BSR_USBH 0x00000008 +#define BSR_USBS 0x00000010 +#define BSR_ADSL 0x00000020 +#define BSR_DMAMEM 0x00000040 +#define BSR_SAR 0x00000080 +#define BSR_ACLC 0x00000100 +#define BSR_ADSL_MIPS_PLL 0x00000400 +#define BSR_ALL_BLOCKS \ + (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ + BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) +} PerfControl; + +#define PERF ((volatile PerfControl * const) PERF_BASE) + + +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define LOOPBK 0x10 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + + byte config; +#define XMITBREAK 0x40 +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + /* 4-LSBS represent STOP bits/char + * in 1/8 bit-time intervals. Zero + * represents 1/8 stop bit interval. + * Fifteen represents 2 stop bits. + */ + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + /* 5-bit TimeoutCnt is in low bits of this register. + * This count represents the number of characters + * idle times before setting receive Irq when below threshold + */ + uint32 baudword; + /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate + */ + + byte txf_levl; /* Read-only fifo depth */ + byte rxf_levl; /* Read-only fifo depth */ + byte fifocfg; /* Upper 4-bits are TxThresh, Lower are + * RxThreshold. Irq can be asserted + * when rx fifo> thresh, txfifo<thresh + */ + byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) + * if these bits are also enabled to GPIO_o + */ +#define DTREN 0x01 +#define RTSEN 0x02 + + byte unused1; + byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to + * detect irq on rising AND falling + * edges for corresponding GPIO_i + * if enabled (edge insensitive) + */ + byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense + * 0 for negedge sense if + * not configured for edge + * insensitive (see above) + * Lower 4 bits: Mask to enable change + * detection IRQ for corresponding + * GPIO_i + */ + byte DeltaIP_SyncIP; /* Upper 4 bits show which bits + * have changed (may set IRQ). + * read automatically clears bit + * Lower 4 bits are actual status + */ + + uint16 intMask; /* Same Bit defs for Mask and status */ + uint16 intStatus; +#define DELTAIP 0x0001 +#define TXUNDERR 0x0002 +#define TXOVFERR 0x0004 +#define TXFIFOTHOLD 0x0008 +#define TXREADLATCH 0x0010 +#define TXFIFOEMT 0x0020 +#define RXUNDERR 0x0040 +#define RXOVFERR 0x0080 +#define RXTIMEOUT 0x0100 +#define RXFIFOFULL 0x0200 +#define RXFIFOTHOLD 0x0400 +#define RXFIFONE 0x0800 +#define RXFRAMERR 0x1000 +#define RXPARERR 0x2000 +#define RXBRK 0x4000 + + uint16 unused2; + uint16 Data; /* Write to TX, Read from RX */ + /* bits 11:8 are BRK,PAR,FRM errors */ + + uint32 unused3; + uint32 unused4; +} Uart; + +#define UART ((volatile Uart * const) UART_BASE) + +typedef struct GpioControl { + uint32 unused0; + uint32 GPIODir; /* bits 7:0 */ + uint32 unused1; + uint32 GPIOio; /* bits 7:0 */ + uint32 LEDCtrl; +#define LED3_STROBE 0x08000000 +#define LED2_STROBE 0x04000000 +#define LED1_STROBE 0x02000000 +#define LED0_STROBE 0x01000000 +#define LED_TEST 0x00010000 +#define LED3_DISABLE_LINK_ACT 0x00008000 +#define LED2_DISABLE_LINK_ACT 0x00004000 +#define LED1_DISABLE_LINK_ACT 0x00002000 +#define LED0_DISABLE_LINK_ACT 0x00001000 +#define LED_INTERVAL_SET_MASK 0x00000f00 +#define LED_INTERVAL_SET_320MS 0x00000500 +#define LED_INTERVAL_SET_160MS 0x00000400 +#define LED_INTERVAL_SET_80MS 0x00000300 +#define LED_INTERVAL_SET_40MS 0x00000200 +#define LED_INTERVAL_SET_20MS 0x00000100 +#define LED3_ON 0x00000080 +#define LED2_ON 0x00000040 +#define LED1_ON 0x00000020 +#define LED0_ON 0x00000010 +#define LED3_ENABLE 0x00000008 +#define LED2_ENABLE 0x00000004 +#define LED1_ENABLE 0x00000002 +#define LED0_ENABLE 0x00000001 + uint32 SpiSlaveCfg; +#define SPI_SLAVE_RESET 0x00010000 +#define SPI_RESTRICT 0x00000400 +#define SPI_DELAY_DISABLE 0x00000200 +#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 +#define SPI_SER_ADDR_CFG_MASK 0x0000000c +#define SPI_MODE 0x00000001 + uint32 vRegConfig; +} GpioControl; + +#define GPIO ((volatile GpioControl * const) GPIO_BASE) + +/* Number to mask conversion macro used for GPIODir and GPIOio */ +#define GPIO_NUM_MAX_BITS_MASK 0x0f +#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) + +/* +** Spi Controller +*/ + +typedef struct SpiControl { + uint16 spiCmd; /* (0x0): SPI command */ +#define SPI_CMD_START_IMMEDIATE 3 + +#define SPI_CMD_COMMAND_SHIFT 0 +#define SPI_CMD_DEVICE_ID_SHIFT 4 +#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 + + byte spiIntStatus; /* (0x2): SPI interrupt status */ + byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */ + + byte spiIntMask; /* (0x4): SPI interrupt mask */ +#define SPI_INTR_CMD_DONE 0x01 +#define SPI_INTR_CLEAR_ALL 0x1f + + byte spiStatus; /* (0x5): SPI status */ + + byte spiClkCfg; /* (0x6): SPI clock configuration */ + + byte spiFillByte; /* (0x7): SPI fill byte */ + + byte unused0; + byte spiMsgTail; /* (0x9): msgtail */ + byte unused1; + byte spiRxTail; /* (0xB): rxtail */ + + uint32 unused2[13]; /* (0x0c - 0x3c) reserved */ + + byte spiMsgCtl; /* (0x40) control byte */ +#define HALF_DUPLEX_W 1 +#define HALF_DUPLEX_R 2 +#define SPI_MSG_TYPE_SHIFT 6 +#define SPI_BYTE_CNT_SHIFT 0 + byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */ + byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */ + byte unused3[64]; /* (0xc0 - 0xff) reserved */ +} SpiControl; + +#define SPI ((volatile SpiControl * const) SPI_BASE) + +/* +** External Bus Interface +*/ +typedef struct EbiChipSelect { + uint32 base; /* base address in upper 24 bits */ +#define EBI_SIZE_8K 0 +#define EBI_SIZE_16K 1 +#define EBI_SIZE_32K 2 +#define EBI_SIZE_64K 3 +#define EBI_SIZE_128K 4 +#define EBI_SIZE_256K 5 +#define EBI_SIZE_512K 6 +#define EBI_SIZE_1M 7 +#define EBI_SIZE_2M 8 +#define EBI_SIZE_4M 9 +#define EBI_SIZE_8M 10 +#define EBI_SIZE_16M 11 +#define EBI_SIZE_32M 12 +#define EBI_SIZE_64M 13 +#define EBI_SIZE_128M 14 +#define EBI_SIZE_256M 15 + uint32 config; +#define EBI_ENABLE 0x00000001 /* .. enable this range */ +#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ +#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ +#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ +#define EBI_WREN 0x00000020 /* enable posted writes */ +#define EBI_POLARITY 0x00000040 /* .. set to invert something, + ** don't know what yet */ +#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ +#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ +#define EBI_FIFO 0x00000200 /* .. use fifo */ +#define EBI_RE 0x00000400 /* .. Reverse Endian */ +} EbiChipSelect; + +typedef struct MpiRegisters { + EbiChipSelect cs[1]; /* size chip select configuration */ +} MpiRegisters; + +#define MPI ((volatile MpiRegisters * const) MPI_BASE) + + +#endif + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h new file mode 100644 index 000000000..fb77cbcbe --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h @@ -0,0 +1,72 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __6345_INTR_H +#define __6345_INTR_H + + +/*=====================================================================*/ +/* BCM6345 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6345 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 +#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +/* Internal peripheral interrupt IDs */ +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) + +/* DMA channel interrupt IDs */ +#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) +#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) +#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) +#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) +#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) +#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) +#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) +#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) +#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) +#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) +#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) +#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) + + +#endif /* __BCM6345_H */ + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h new file mode 100644 index 000000000..78e59a439 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h @@ -0,0 +1,163 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6345_MAP_H +#define __BCM6345_MAP_H + + +#include "bcmtypes.h" +#include "6345_intr.h" + +typedef struct IntControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define USB_CLK_EN 0x0100 +#define EMAC_CLK_EN 0x0080 +#define UART_CLK_EN 0x0008 +#define CPU_CLK_EN 0x0001 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 4 +#define EI_CLEAR_SHFT 8 +#define EI_MASK_SHFT 12 +#define EI_INSENS_SHFT 16 +#define EI_LEVEL_SHFT 20 +} IntControl; + +#define INTC_BASE 0xfffe0000 +#define PERF ((volatile IntControl * const) INTC_BASE) + +#define TIMR_BASE 0xfffe0200 +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) + +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + byte config; +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define XMITBREAK 0x40 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + uint32 baudword; + + byte txf_levl; + byte rxf_levl; + byte fifocfg; + byte prog_out; + + byte unused1; + byte DeltaIPEdgeNoSense; + byte DeltaIPConfig_Mask; + byte DeltaIP_SyncIP; + uint16 intMask; + uint16 intStatus; +#define TXUNDERR 0x0002 +#define TXOVFERR 0x0004 +#define TXFIFOEMT 0x0020 +#define RXOVFERR 0x0080 +#define RXFIFONE 0x0800 +#define RXFRAMERR 0x1000 +#define RXPARERR 0x2000 +#define RXBRK 0x4000 + + uint16 unused2; + uint16 Data; + uint32 unused3; + uint32 unused4; +} Uart; + +#define UART_BASE 0xfffe0300 +#define UART ((volatile Uart * const) UART_BASE) + +typedef struct GpioControl { + uint16 unused0; + byte unused1; + byte TBusSel; + + uint16 unused2; + uint16 GPIODir; + byte unused3; + byte Leds; + uint16 GPIOio; + + uint32 UartCtl; +} GpioControl; + +#define GPIO_BASE 0xfffe0400 +#define GPIO ((volatile GpioControl * const) GPIO_BASE) + +#define GPIO_NUM_MAX_BITS_MASK 0x0f +#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) + + +#endif + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h new file mode 100644 index 000000000..da3ee9fc3 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h @@ -0,0 +1,74 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __6348_INTR_H +#define __6348_INTR_H + + +/*=====================================================================*/ +/* BCM6348 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6348 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) +#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) +#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) +#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) +#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) +#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) +#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) +#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) +#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) +#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) +#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) +#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) +#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) +#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) +#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) +#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) +#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) +#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) +#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) + + +#endif /* __BCM6348_H */ + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h new file mode 100644 index 000000000..199ef9e15 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h @@ -0,0 +1,500 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6348_MAP_H +#define __BCM6348_MAP_H + +#include "bcmtypes.h" + +#define PERF_BASE 0xfffe0000 +#define TIMR_BASE 0xfffe0200 +#define UART_BASE 0xfffe0300 +#define GPIO_BASE 0xfffe0400 +#define MPI_BASE 0xfffe2000 /* MPI control registers */ +#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ +#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ + +typedef struct PerfControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define EMAC_CLK_EN 0x0010 +#define SAR_CLK_EN 0x0020 +#define USBS_CLK_EN 0x0040 +#define USBH_CLK_EN 0x0100 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 5 +#define EI_CLEAR_SHFT 10 +#define EI_MASK_SHFT 15 +#define EI_INSENS_SHFT 20 +#define EI_LEVEL_SHFT 25 + + uint32 unused[4]; /* (18) */ + uint32 BlockSoftReset; /* (28) */ +#define BSR_SPI 0x00000001 +#define BSR_EMAC 0x00000004 +#define BSR_USBH 0x00000008 +#define BSR_USBS 0x00000010 +#define BSR_ADSL 0x00000020 +#define BSR_DMAMEM 0x00000040 +#define BSR_SAR 0x00000080 +#define BSR_ACLC 0x00000100 +#define BSR_ADSL_MIPS_PLL 0x00000400 +#define BSR_ALL_BLOCKS \ + (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ + BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) + uint32 unused2[2]; /* (2c) */ + uint32 PllStrap; /* (34) */ +#define PLL_N1_SHFT 20 +#define PLL_N1_MASK (7<<PLL_N1_SHFT) +#define PLL_N2_SHFT 15 +#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT) +#define PLL_M1_REF_SHFT 12 +#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT) +#define PLL_M2_REF_SHFT 9 +#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT) +#define PLL_M1_CPU_SHFT 6 +#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT) +#define PLL_M1_BUS_SHFT 3 +#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT) +#define PLL_M2_BUS_SHFT 0 +#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT) +} PerfControl; + +#define PERF ((volatile PerfControl * const) PERF_BASE) + +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) + +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define LOOPBK 0x10 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + + byte config; +#define XMITBREAK 0x40 +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + /* 4-LSBS represent STOP bits/char + * in 1/8 bit-time intervals. Zero + * represents 1/8 stop bit interval. + * Fifteen represents 2 stop bits. + */ + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + /* 5-bit TimeoutCnt is in low bits of this register. + * This count represents the number of characters + * idle times before setting receive Irq when below threshold + */ + uint32 baudword; + /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate + */ + + byte txf_levl; /* Read-only fifo depth */ + byte rxf_levl; /* Read-only fifo depth */ + byte fifocfg; /* Upper 4-bits are TxThresh, Lower are + * RxThreshold. Irq can be asserted + * when rx fifo> thresh, txfifo<thresh + */ + byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) + * if these bits are also enabled to GPIO_o + */ +#define DTREN 0x01 +#define RTSEN 0x02 + + byte unused1; + byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to + * detect irq on rising AND falling + * edges for corresponding GPIO_i + * if enabled (edge insensitive) + */ + byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense + * 0 for negedge sense if + * not configured for edge + * insensitive (see above) + * Lower 4 bits: Mask to enable change + * detection IRQ for corresponding + * GPIO_i + */ + byte DeltaIP_SyncIP; /* Upper 4 bits show which bits + * have changed (may set IRQ). + * read automatically clears bit + * Lower 4 bits are actual status + */ + + uint16 intMask; /* Same Bit defs for Mask and status */ + uint16 intStatus; +#define DELTAIP 0x0001 +#define TXUNDERR 0x0002 +#define TXOVFERR 0x0004 +#define TXFIFOTHOLD 0x0008 +#define TXREADLATCH 0x0010 +#define TXFIFOEMT 0x0020 +#define RXUNDERR 0x0040 +#define RXOVFERR 0x0080 +#define RXTIMEOUT 0x0100 +#define RXFIFOFULL 0x0200 +#define RXFIFOTHOLD 0x0400 +#define RXFIFONE 0x0800 +#define RXFRAMERR 0x1000 +#define RXPARERR 0x2000 +#define RXBRK 0x4000 + + uint16 unused2; + uint16 Data; /* Write to TX, Read from RX */ + /* bits 11:8 are BRK,PAR,FRM errors */ + + uint32 unused3; + uint32 unused4; +} Uart; + +#define UART ((volatile Uart * const) UART_BASE) + +typedef struct GpioControl { + uint32 GPIODir_high; /* bits 36:32 */ + uint32 GPIODir; /* bits 31:00 */ + uint32 GPIOio_high; /* bits 36:32 */ + uint32 GPIOio; /* bits 31:00 */ + uint32 LEDCtrl; +#define LED3_STROBE 0x08000000 +#define LED2_STROBE 0x04000000 +#define LED1_STROBE 0x02000000 +#define LED0_STROBE 0x01000000 +#define LED_TEST 0x00010000 +#define LED3_DISABLE_LINK_ACT 0x00008000 +#define LED2_DISABLE_LINK_ACT 0x00004000 +#define LED1_DISABLE_LINK_ACT 0x00002000 +#define LED0_DISABLE_LINK_ACT 0x00001000 +#define LED_INTERVAL_SET_MASK 0x00000f00 +#define LED_INTERVAL_SET_320MS 0x00000500 +#define LED_INTERVAL_SET_160MS 0x00000400 +#define LED_INTERVAL_SET_80MS 0x00000300 +#define LED_INTERVAL_SET_40MS 0x00000200 +#define LED_INTERVAL_SET_20MS 0x00000100 +#define LED3_ON 0x00000080 +#define LED2_ON 0x00000040 +#define LED1_ON 0x00000020 +#define LED0_ON 0x00000010 +#define LED3_ENABLE 0x00000008 +#define LED2_ENABLE 0x00000004 +#define LED1_ENABLE 0x00000002 +#define LED0_ENABLE 0x00000001 + uint32 SpiSlaveCfg; +#define SPI_SLAVE_RESET 0x00010000 +#define SPI_RESTRICT 0x00000400 +#define SPI_DELAY_DISABLE 0x00000200 +#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 +#define SPI_SER_ADDR_CFG_MASK 0x0000000c +#define SPI_MODE 0x00000001 + uint32 GPIOMode; +#define GROUP4_DIAG 0x00090000 +#define GROUP4_UTOPIA 0x00080000 +#define GROUP4_LEGACY_LED 0x00030000 +#define GROUP4_MII_SNOOP 0x00020000 +#define GROUP4_EXT_EPHY 0x00010000 +#define GROUP3_DIAG 0x00009000 +#define GROUP3_UTOPIA 0x00008000 +#define GROUP3_EXT_MII 0x00007000 +#define GROUP2_DIAG 0x00000900 +#define GROUP2_PCI 0x00000500 +#define GROUP1_DIAG 0x00000090 +#define GROUP1_UTOPIA 0x00000080 +#define GROUP1_SPI_UART 0x00000060 +#define GROUP1_SPI_MASTER 0x00000060 +#define GROUP1_MII_PCCARD 0x00000040 +#define GROUP1_MII_SNOOP 0x00000020 +#define GROUP1_EXT_EPHY 0x00000010 +#define GROUP0_DIAG 0x00000009 +#define GROUP0_EXT_MII 0x00000007 + +} GpioControl; + +#define GPIO ((volatile GpioControl * const) GPIO_BASE) + +/* Number to mask conversion macro used for GPIODir and GPIOio */ +#define GPIO_NUM_TOTAL_BITS_MASK 0x3f +#define GPIO_NUM_MAX_BITS_MASK 0x1f +#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) ) + +/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */ +#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07 +#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) + + +/* +** External Bus Interface +*/ +typedef struct EbiChipSelect { + uint32 base; /* base address in upper 24 bits */ +#define EBI_SIZE_8K 0 +#define EBI_SIZE_16K 1 +#define EBI_SIZE_32K 2 +#define EBI_SIZE_64K 3 +#define EBI_SIZE_128K 4 +#define EBI_SIZE_256K 5 +#define EBI_SIZE_512K 6 +#define EBI_SIZE_1M 7 +#define EBI_SIZE_2M 8 +#define EBI_SIZE_4M 9 +#define EBI_SIZE_8M 10 +#define EBI_SIZE_16M 11 +#define EBI_SIZE_32M 12 +#define EBI_SIZE_64M 13 +#define EBI_SIZE_128M 14 +#define EBI_SIZE_256M 15 + uint32 config; +#define EBI_ENABLE 0x00000001 /* .. enable this range */ +#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ +#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ +#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ +#define EBI_WREN 0x00000020 /* enable posted writes */ +#define EBI_POLARITY 0x00000040 /* .. set to invert something, + ** don't know what yet */ +#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ +#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ +#define EBI_FIFO 0x00000200 /* .. use fifo */ +#define EBI_RE 0x00000400 /* .. Reverse Endian */ +} EbiChipSelect; + +typedef struct MpiRegisters { + EbiChipSelect cs[7]; /* size chip select configuration */ +#define EBI_CS0_BASE 0 +#define EBI_CS1_BASE 1 +#define EBI_CS2_BASE 2 +#define EBI_CS3_BASE 3 +#define PCMCIA_COMMON_BASE 4 +#define PCMCIA_ATTRIBUTE_BASE 5 +#define PCMCIA_IO_BASE 6 + uint32 unused0[2]; /* reserved */ + uint32 ebi_control; /* ebi control */ + uint32 unused1[4]; /* reserved */ +#define EBI_ACCESS_TIMEOUT 0x000007FF + uint32 pcmcia_cntl1; /* pcmcia control 1 */ +#define PCCARD_CARD_RESET 0x00040000 +#define CARDBUS_ENABLE 0x00008000 +#define PCMCIA_ENABLE 0x00004000 +#define PCMCIA_GPIO_ENABLE 0x00002000 +#define CARDBUS_IDSEL 0x00001F00 +#define VS2_OEN 0x00000080 +#define VS1_OEN 0x00000040 +#define VS2_OUT 0x00000020 +#define VS1_OUT 0x00000010 +#define VS2_IN 0x00000008 +#define VS1_IN 0x00000004 +#define CD2_IN 0x00000002 +#define CD1_IN 0x00000001 +#define VS_MASK 0x0000000C +#define CD_MASK 0x00000003 + uint32 unused2; /* reserved */ + uint32 pcmcia_cntl2; /* pcmcia control 2 */ +#define PCMCIA_BYTESWAP_DIS 0x00000002 +#define PCMCIA_HALFWORD_EN 0x00000001 +#define RW_ACTIVE_CNT_BIT 2 +#define INACTIVE_CNT_BIT 8 +#define CE_SETUP_CNT_BIT 16 +#define CE_HOLD_CNT_BIT 24 + uint32 unused3[40]; /* reserved */ + + uint32 sp0range; /* PCI to internal system bus address space */ + uint32 sp0remap; + uint32 sp0cfg; + uint32 sp1range; + uint32 sp1remap; + uint32 sp1cfg; + + uint32 EndianCfg; + + uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ +#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ +#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ +#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ +#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ +#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ +#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ + + uint32 l2pmrange1; /* internal system bus to PCI memory space */ +#define PCI_SIZE_64K 0xFFFF0000 +#define PCI_SIZE_128K 0xFFFE0000 +#define PCI_SIZE_256K 0xFFFC0000 +#define PCI_SIZE_512K 0xFFF80000 +#define PCI_SIZE_1M 0xFFF00000 +#define PCI_SIZE_2M 0xFFE00000 +#define PCI_SIZE_4M 0xFFC00000 +#define PCI_SIZE_8M 0xFF800000 +#define PCI_SIZE_16M 0xFF000000 +#define PCI_SIZE_32M 0xFE000000 + uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ + uint32 l2pmremap1; +#define CARDBUS_MEM 0x00000004 +#define MEM_WINDOW_EN 0x00000001 + uint32 l2pmrange2; + uint32 l2pmbase2; + uint32 l2pmremap2; + uint32 l2piorange; /* internal system bus to PCI I/O space */ + uint32 l2piobase; + uint32 l2pioremap; + + uint32 pcimodesel; +#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 +#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ +#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ + + uint32 pciintstat; /* PCI interrupt mask/status */ +#define MAILBOX1_SENT 0x08 +#define MAILBOX0_SENT 0x04 +#define MAILBOX1_MSG_RCV 0x02 +#define MAILBOX0_MSG_RCV 0x01 + uint32 locbuscntrl; /* internal system bus control */ +#define DIR_U2P_NOSWAP 0x00000002 +#define EN_PCI_GPIO 0x00000001 + uint32 locintstat; /* internal system bus interrupt mask/status */ +#define CSERR 0x0200 +#define SERR 0x0100 +#define EXT_PCI_INT 0x0080 +#define DIR_FAILED 0x0040 +#define DIR_COMPLETE 0x0020 +#define PCI_CFG 0x0010 + uint32 unused5[7]; + + uint32 mailbox0; + uint32 mailbox1; + + uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ +#define PCI_CFG_REG_WRITE_EN 0x00000080 +#define PCI_CFG_ADDR 0x0000003C + uint32 pcicfgdata; /* internal system bus PCI configuration data */ + + uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ +#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ +#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ +#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ +#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ + uint32 locch2intStat; +#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ +#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ +#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ + uint32 locch2intMask; + uint32 unused6; + uint32 locch2descaddr; + uint32 locch2status1; +#define LOCAL_DESC_STATE 0xE0000000 +#define PCI_DESC_STATE 0x1C000000 +#define BYTE_DONE 0x03FFC000 +#define RING_ADDR 0x00003FFF + uint32 locch2status2; +#define BUFPTR_OFFSET 0x1FFF0000 +#define PCI_MASTER_STATE 0x000000C0 +#define LOC_MASTER_STATE 0x00000038 +#define CONTROL_STATE 0x00000007 + uint32 unused7; + + uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ +#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ +#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ + uint32 locch1intstat; + uint32 locch1intmask; + uint32 unused8; + uint32 locch1descaddr; + uint32 locch1status1; + uint32 locch1status2; + uint32 unused9; + + uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ + uint32 pcich1intstat; + uint32 pcich1intmask; + uint32 pcich1descaddr; + uint32 pcich1status1; + uint32 pcich1status2; + + uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ + uint32 pcich2intstat; + uint32 pcich2intmask; + uint32 pcich2descaddr; + uint32 pcich2status1; + uint32 pcich2status2; + + uint32 perm_id; /* permanent device and vendor id */ + uint32 perm_rev; /* permanent revision id */ +} MpiRegisters; + +#define MPI ((volatile MpiRegisters * const) MPI_BASE) + +/* PCI configuration address space start offset 0x40 */ +#define BRCM_PCI_CONFIG_TIMER 0x40 +#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 +#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF + +/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ +#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ +#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ + +#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) + +#endif + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h new file mode 100644 index 000000000..e902e96aa --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h @@ -0,0 +1,153 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +//************************************************************************************** +// File Name : bcmTag.h +// +// Description: add tag with validation system to the firmware image file to be uploaded +// via http +// +// Created : 02/28/2002 seanl +//************************************************************************************** + +#ifndef _BCMTAG_H_ +#define _BCMTAG_H_ + + +#define BCM_SIG_1 "Broadcom Corporation" +#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. + +#define BCM_TAG_VER "6" +#define BCM_TAG_VER_LAST "26" + +// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars +#define TAG_LEN 256 +#define TAG_VER_LEN 4 +#define SIG_LEN 20 +#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID +#define CHIP_ID_LEN 6 +#define IMAGE_LEN 10 +#define ADDRESS_LEN 12 +#define FLAG_LEN 2 +#define TOKEN_LEN 20 +#define BOARD_ID_LEN 16 +#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ + (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) + + +// TAG for downloadable image (kernel plus file system) +typedef struct _FILE_TAG +{ + unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. + unsigned char signiture_1[SIG_LEN]; // text line for company info + unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) + unsigned char chipId[CHIP_ID_LEN]; // chip id + unsigned char boardId[BOARD_ID_LEN]; // board id + unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host + unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length + unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address + unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. + unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address + unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. + unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address + unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. + unsigned char dualImage[FLAG_LEN]; // if 1, dual image + unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active + unsigned char reserved[RESERVED_LEN]; // reserved for later use + unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for + // now will be 4 unsigned char crc + unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) +} FILE_TAG, *PFILE_TAG; + +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ +#define CRC_LEN 4 + +// only included if for bcmTag.exe program +#ifdef BCMTAG_EXE_USE + +static unsigned long Crc32_table[256] = { + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D +}; +#endif // BCMTAG_USE + + +#endif // _BCMTAG_H_ + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h new file mode 100644 index 000000000..8c56840f4 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h @@ -0,0 +1,59 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM_INTR_H +#define __BCM_INTR_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(CONFIG_BCM96338) +#include <6338_intr.h> +#endif +#if defined(CONFIG_BCM96345) +#include <6345_intr.h> +#endif +#if defined(CONFIG_BCM96348) +#include <6348_intr.h> +#endif + +/* defines */ +struct pt_regs; +typedef int (*FN_HANDLER) (int, void *); + +/* prototypes */ +extern void enable_brcm_irq(unsigned int irq); +extern void disable_brcm_irq(unsigned int irq); +extern int request_external_irq(unsigned int irq, + FN_HANDLER handler, unsigned long irqflags, + const char * devname, void *dev_id); +extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, + unsigned int interruptId); +extern void dump_intr_regs(void); + +/* compatibility definitions */ +#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) +#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h new file mode 100644 index 000000000..ccfe965dc --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h @@ -0,0 +1,34 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM_MAP_PART_H +#define __BCM_MAP_PART_H + +#if defined(CONFIG_BCM96338) +#include <6338_map_part.h> +#endif +#if defined(CONFIG_BCM96345) +#include <6345_map_part.h> +#endif +#if defined(CONFIG_BCM96348) +#include <6348_map_part.h> +#endif + +#endif + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h new file mode 100644 index 000000000..cecbd995a --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h @@ -0,0 +1,87 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +// +// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition +// +#ifndef BCMPCI_H +#define BCMPCI_H + +/* Memory window in internal system bus address space */ +#define BCM_PCI_MEM_BASE 0x08000000 +/* IO window in internal system bus address space */ +#define BCM_PCI_IO_BASE 0x0C000000 + +#define BCM_PCI_ADDR_MASK 0x1fffffff + +/* Memory window size (range) */ +#define BCM_PCI_MEM_SIZE_16MB 0x01000000 +/* IO window size (range) */ +#define BCM_PCI_IO_SIZE_64KB 0x00010000 + +/* PCI Configuration and I/O space acesss */ +#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) + +/* fake USB PCI slot */ +#define USB_HOST_SLOT 9 +#define USB_BAR0_MEM_SIZE 0x0800 + +#define BCM_HOST_MEM_SPACE1 0x10000000 +#define BCM_HOST_MEM_SPACE2 0x00000000 + +/* + * EBI bus clock is 33MHz and share with PCI bus + * each clock cycle is 30ns. + */ +/* attribute memory access wait cnt for 4306 */ +#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns +#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns +#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) +#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns + +/* common memory access wait cnt for 4306 */ +#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns +#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns +#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) +#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns + +#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also +#define PCCARD_VCC_33V 0x00010000 +#define PCCARD_VCC_50V 0x00020000 + +typedef enum { + MPI_CARDTYPE_NONE, // No Card in slot + MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot + MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot +} CardType; + +#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus + +#define pcmciaAttrOffset 0x00200000 +#define pcmciaMemOffset 0x00000000 +// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. +#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) +// Base Address is that mapped into the MPI ChipSelect registers. +// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. +#define pcmciaBase 0xbf000000 +#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) +#define pcmciaMem (pcmciaMemOffset | pcmciaBase) +#define pcmciaIo (pcmciaIoOffset | pcmciaBase) + +#endif diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h new file mode 100644 index 000000000..43aebc9c0 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h @@ -0,0 +1,160 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +// +// bcmtypes.h - misc useful typedefs +// +#ifndef BCMTYPES_H +#define BCMTYPES_H + +// These are also defined in typedefs.h in the application area, so I need to +// protect against re-definition. + +#ifndef _TYPEDEFS_H_ +typedef unsigned char uint8; +typedef unsigned short uint16; +typedef unsigned long uint32; +typedef signed char int8; +typedef signed short int16; +typedef signed long int32; +#endif + +typedef unsigned char byte; +// typedef unsigned long sem_t; + +typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; +typedef signed long LONG,*PLONG; + +typedef unsigned int *PUINT; +typedef signed int INT; + +typedef unsigned short *PUSHORT; +typedef signed short SHORT,*PSHORT; +typedef unsigned short WORD,*PWORD; + +typedef unsigned char *PUCHAR; +typedef signed char *PCHAR; + +typedef void *PVOID; + +typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; + +typedef unsigned char BYTE,*PBYTE; + +//#ifndef __GNUC__ +//The following has been defined in Vxworks internally: vxTypesOld.h +//redefine under vxworks will cause error +typedef signed int *PINT; + +typedef signed char INT8; +typedef signed short INT16; +typedef signed long INT32; + +typedef unsigned char UINT8; +typedef unsigned short UINT16; +typedef unsigned long UINT32; + +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned int UINT; +typedef unsigned long ULONG; + +typedef void VOID; +typedef unsigned char BOOL; + +//#endif /* __GNUC__ */ + + +// These are also defined in typedefs.h in the application area, so I need to +// protect against re-definition. +#ifndef TYPEDEFS_H + +// Maximum and minimum values for a signed 16 bit integer. +#define MAX_INT16 32767 +#define MIN_INT16 -32768 + +// Useful for true/false return values. This uses the +// Taligent notation (k for constant). +typedef enum +{ + kFalse = 0, + kTrue = 1 +} Bool; + +#endif + +/* macros to protect against unaligned accesses */ + +#if 0 +/* first arg is an address, second is a value */ +#define PUT16( a, d ) { \ + *((byte *)a) = (byte)((d)>>8); \ + *(((byte *)a)+1) = (byte)(d); \ +} + +#define PUT32( a, d ) { \ + *((byte *)a) = (byte)((d)>>24); \ + *(((byte *)a)+1) = (byte)((d)>>16); \ + *(((byte *)a)+2) = (byte)((d)>>8); \ + *(((byte *)a)+3) = (byte)(d); \ +} + +/* first arg is an address, returns a value */ +#define GET16( a ) ( \ + (*((byte *)a) << 8) | \ + (*(((byte *)a)+1)) \ +) + +#define GET32( a ) ( \ + (*((byte *)a) << 24) | \ + (*(((byte *)a)+1) << 16) | \ + (*(((byte *)a)+2) << 8) | \ + (*(((byte *)a)+3)) \ +) +#endif + +#ifndef YES +#define YES 1 +#endif + +#ifndef NO +#define NO 0 +#endif + +#ifndef IN +#define IN +#endif + +#ifndef OUT +#define OUT +#endif + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef FALSE +#define FALSE 0 +#endif + +#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) +#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) +#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) + +#endif diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h new file mode 100644 index 000000000..e674cb10d --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h @@ -0,0 +1,373 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/***********************************************************************/ +/* */ +/* MODULE: board.h */ +/* DATE: 97/02/18 */ +/* PURPOSE: Board specific information. This module should include */ +/* all base device addresses and board specific macros. */ +/* */ +/***********************************************************************/ +#ifndef _BOARD_H +#define _BOARD_H + +/*****************************************************************************/ +/* Misc board definitions */ +/*****************************************************************************/ + +#define DYING_GASP_API + +/*****************************************************************************/ +/* Physical Memory Map */ +/*****************************************************************************/ + +#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ +#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ + +/*****************************************************************************/ +/* Note that the addresses above are physical addresses and that programs */ +/* have to use converted addresses defined below: */ +/*****************************************************************************/ +#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ +#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ +#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ + +/*****************************************************************************/ +/* Select the PLL value to get the desired CPU clock frequency. */ +/* */ +/* */ +/*****************************************************************************/ +#define FPERIPH 50000000 + +#define ONEK 1024 +#define BLK64K (64*ONEK) +#define FLASH45_BLKS_BOOT_ROM 1 +#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) +#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ + +/*****************************************************************************/ +/* Note that the addresses above are physical addresses and that programs */ +/* have to use converted addresses defined below: */ +/*****************************************************************************/ +#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ +#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ +#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ + +/*****************************************************************************/ +/* Select the PLL value to get the desired CPU clock frequency. */ +/* */ +/* */ +/*****************************************************************************/ +#define FPERIPH 50000000 + +#define SDRAM_TYPE_ADDRESS_OFFSET 16 +#define NVRAM_DATA_OFFSET 0x0580 +#define NVRAM_DATA_ID 0x0f1e2d3c +#define BOARD_SDRAM_TYPE *(unsigned long *) \ + (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) + +#define ONEK 1024 +#define BLK64K (64*ONEK) + +// nvram and psi flash definitions for 45 +#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram +#define NVRAM_PSI_DEFAULT 24 // default psi in K byes + +/*****************************************************************************/ +/* NVRAM Offset and definition */ +/*****************************************************************************/ + +#define NVRAM_VERSION_NUMBER 2 +#define NVRAM_VERSION_NUMBER_ADDRESS 0 + +#define NVRAM_BOOTLINE_LEN 256 +#define NVRAM_BOARD_ID_STRING_LEN 16 +#define NVRAM_MAC_ADDRESS_LEN 6 +#define NVRAM_MAC_COUNT_MAX 32 + +/*****************************************************************************/ +/* Misc Offsets */ +/*****************************************************************************/ + +#define CFE_VERSION_OFFSET 0x0570 +#define CFE_VERSION_MARK_SIZE 5 +#define CFE_VERSION_SIZE 5 + +typedef struct +{ + unsigned long ulVersion; + char szBootline[NVRAM_BOOTLINE_LEN]; + char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; + unsigned long ulReserved1[2]; + unsigned long ulNumMacAddrs; + unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; + char chReserved[2]; + unsigned long ulCheckSum; +} NVRAM_DATA, *PNVRAM_DATA; + + +/*****************************************************************************/ +/* board ioctl calls for flash, led and some other utilities */ +/*****************************************************************************/ + + +/* Defines. for board driver */ +#define BOARD_IOCTL_MAGIC 'B' +#define BOARD_DRV_MAJOR 206 + +#define MAC_ADDRESS_ANY (unsigned long) -1 + +#define BOARD_IOCTL_FLASH_INIT \ + _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_FLASH_WRITE \ + _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_FLASH_READ \ + _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_NR_PAGES \ + _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_DUMP_ADDR \ + _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_MEMORY \ + _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_MIPS_SOFT_RESET \ + _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_LED_CTRL \ + _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_ID \ + _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_PSI_SIZE \ + _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_SDRAM_SIZE \ + _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_MONITOR_FD \ + _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ + _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_BOOTLINE \ + _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_BOOTLINE \ + _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_CHIP_ID \ + _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_NUM_ENET \ + _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_CFE_VER \ + _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_ENET_CFG \ + _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ + _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_SES_LED \ + _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) + +//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12 +#define RESET_BUTTON_UP 1 +#define RESET_BUTTON_PRESSDOWN 0 +#define BOARD_IOCTL_GET_RESETHOLD \ + _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS) +//>>JUNHON, 2004/09/15 + +// for the action in BOARD_IOCTL_PARMS for flash operation +typedef enum +{ + PERSISTENT, + NVRAM, + BCM_IMAGE_CFE, + BCM_IMAGE_FS, + BCM_IMAGE_KERNEL, + BCM_IMAGE_WHOLE, + SCRATCH_PAD, + FLASH_SIZE, +} BOARD_IOCTL_ACTION; + + +typedef struct boardIoctParms +{ + char *string; + char *buf; + int strLen; + int offset; + BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ + int result; +} BOARD_IOCTL_PARMS; + + +// LED defines +typedef enum +{ + kLedAdsl, + kLedWireless, + kLedUsb, + kLedHpna, + kLedWanData, + kLedPPP, + kLedVoip, + kLedSes, + kLedLan, + kLedSelfTest, + kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. +} BOARD_LED_NAME; + +typedef enum +{ + kLedStateOff, /* turn led off */ + kLedStateOn, /* turn led on */ + kLedStateFail, /* turn led on red */ + kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ + kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ + kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ +} BOARD_LED_STATE; + + +// virtual and physical map pair defined in board.c +typedef struct ledmappair +{ + BOARD_LED_NAME ledName; // virtual led name + BOARD_LED_STATE ledInitState; // initial led state when the board boots. + unsigned short ledMask; // physical GPIO pin mask + unsigned short ledActiveLow; // reset bit to turn on LED + unsigned short ledMaskFail; // physical GPIO pin mask for state failure + unsigned short ledActiveLowFail;// reset bit to turn on LED +} LED_MAP_PAIR, *PLED_MAP_PAIR; + +typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); + +/* Flash storage address information that is determined by the flash driver. */ +typedef struct flashaddrinfo +{ + int flash_persistent_start_blk; + int flash_persistent_number_blk; + int flash_persistent_length; + unsigned long flash_persistent_blk_offset; + int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) + int flash_scratch_pad_number_blk; + int flash_scratch_pad_length; + unsigned long flash_scratch_pad_blk_offset; + int flash_nvram_start_blk; + int flash_nvram_number_blk; + int flash_nvram_length; + unsigned long flash_nvram_blk_offset; +} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; + +// scratch pad defines +/* SP - Persisten Scratch Pad format: + sp header : 32 bytes + tokenId-1 : 8 bytes + tokenId-1 len : 4 bytes + tokenId-1 data + .... + tokenId-n : 8 bytes + tokenId-n len : 4 bytes + tokenId-n data +*/ + +#define MAGIC_NUM_LEN 8 +#define MAGIC_NUMBER "gOGoBrCm" +#define TOKEN_NAME_LEN 16 +#define SP_VERSION 1 +#define SP_MAX_LEN 8 * 1024 // 8k buf before psi +#define SP_RESERVERD 16 + +typedef struct _SP_HEADER +{ + char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number + int SPVersion; // version number + int SPUsedLen; // used sp len + char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes +} SP_HEADER, *PSP_HEADER; + +typedef struct _TOKEN_DEF +{ + char tokenName[TOKEN_NAME_LEN]; + int tokenLen; +} SP_TOKEN, *PSP_TOKEN; + + +/*****************************************************************************/ +/* Function Prototypes */ +/*****************************************************************************/ +#if !defined(__ASM_ASM_H) +void dumpaddr( unsigned char *pAddr, int nLen ); + +int kerSysNvRamGet(char *string, int strLen, int offset); +int kerSysNvRamSet(char *string, int strLen, int offset); +int kerSysPersistentGet(char *string, int strLen, int offset); +int kerSysPersistentSet(char *string, int strLen, int offset); +int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); +int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); +int kerSysBcmImageSet( int flash_start_addr, char *string, int size); +int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); +int kerSysReleaseMacAddress( unsigned char *pucaAddr ); +int kerSysGetSdramSize( void ); +void kerSysGetBootline(char *string, int strLen); +void kerSysSetBootline(char *string, int strLen); +void kerSysMipsSoftReset(void); +void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); +void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); +int kerSysFlashSizeGet(void); +void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); +void kerSysDeregisterDyingGaspHandler(char *devname); +void kerSysWakeupMonitorTask( void ); +#endif + +#define BOOT_CFE 0 +#define BOOT_REDBOOT 1 + +extern int boot_loader_type; + +#endif /* _BOARD_H */ + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/int-handler.S b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/int-handler.S new file mode 100644 index 000000000..a7a9c9d20 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/int-handler.S @@ -0,0 +1,59 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Generic interrupt handler for Broadcom MIPS boards + */ + +#include <linux/autoconf.h> + +#include <asm/asm.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + +/* + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware + * 4 Hardware + * 5 Hardware + * 6 Hardware + * 7 R4k timer + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(brcmIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set noreorder + .set at + + jal plat_irq_dispatch + move a0, sp + + j ret_from_irq + nop + + END(brcmIRQ) diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c new file mode 100644 index 000000000..7ee752684 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c @@ -0,0 +1,256 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Interrupt control functions for Broadcom 963xx MIPS boards + */ + +#include <asm/atomic.h> + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> + +#include <asm/irq.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/signal.h> +#include <bcm_map_part.h> +#include <bcm_intr.h> + +static void irq_dispatch_int(struct pt_regs *regs) +{ + unsigned int pendingIrqs; + static unsigned int irqBit; + static unsigned int isrNumber = 31; + + pendingIrqs = PERF->IrqStatus & PERF->IrqMask; + if (!pendingIrqs) { + return; + } + + while (1) { + irqBit <<= 1; + isrNumber++; + if (isrNumber == 32) { + isrNumber = 0; + irqBit = 0x1; + } + if (pendingIrqs & irqBit) { + PERF->IrqMask &= ~irqBit; // mask + do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET); + break; + } + } +} + +static void irq_dispatch_ext(uint32 irq) +{ + if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { + printk("**** Ext IRQ mask. Should not dispatch ****\n"); + } + /* disable and clear interrupt in the controller */ + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); + do_IRQ(irq); +} + + +extern void brcm_timer_interrupt(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + u32 cause; + while((cause = (read_c0_cause()& CAUSEF_IP))) { + if (cause & CAUSEF_IP7) + brcm_timer_interrupt(regs); + else if (cause & CAUSEF_IP2) + irq_dispatch_int(regs); + else if (cause & CAUSEF_IP3) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0); + else if (cause & CAUSEF_IP4) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1); + else if (cause & CAUSEF_IP5) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2); + else if (cause & CAUSEF_IP6) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3); + local_irq_disable(); + } +} + + +void enable_brcm_irq(unsigned int irq) +{ + unsigned long flags; + + local_irq_save(flags); + if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { + PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); + } + else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { + /* enable and clear interrupt in the controller */ + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); + } + local_irq_restore(flags); +} + +void disable_brcm_irq(unsigned int irq) +{ + unsigned long flags; + + local_irq_save(flags); + if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { + PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); + } + else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { + /* disable interrupt in the controller */ + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); + } + local_irq_restore(flags); +} + +void ack_brcm_irq(unsigned int irq) +{ + /* Already done in brcm_irq_dispatch */ +} + +unsigned int startup_brcm_irq(unsigned int irq) +{ + enable_brcm_irq(irq); + + return 0; /* never anything pending */ +} + +unsigned int startup_brcm_none(unsigned int irq) +{ + return 0; +} + +void end_brcm_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_brcm_irq(irq); +} + +void end_brcm_none(unsigned int irq) +{ +} + +static struct hw_interrupt_type brcm_irq_type = { + .typename = "MIPS", + .startup = startup_brcm_irq, + .shutdown = disable_brcm_irq, + .enable = enable_brcm_irq, + .disable = disable_brcm_irq, + .ack = ack_brcm_irq, + .end = end_brcm_irq, + .set_affinity = NULL +}; + +static struct hw_interrupt_type brcm_irq_no_end_type = { + .typename = "MIPS", + .startup = startup_brcm_none, + .shutdown = disable_brcm_irq, + .enable = enable_brcm_irq, + .disable = disable_brcm_irq, + .ack = ack_brcm_irq, + .end = end_brcm_none, + .set_affinity = NULL +}; + +void __init arch_init_irq(void) +{ + int i; + + clear_c0_status(ST0_BEV); + change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = 0; + irq_desc[i].depth = 1; + irq_desc[i].chip = &brcm_irq_type; + } +} + +int request_external_irq(unsigned int irq, + FN_HANDLER handler, + unsigned long irqflags, + const char * devname, + void *dev_id) +{ + unsigned long flags; + + local_irq_save(flags); + + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level + + local_irq_restore(flags); + + return( request_irq(irq, handler, irqflags, devname, dev_id) ); +} + +/* VxWorks compatibility function(s). */ + +unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, + unsigned int interruptId) +{ + int nRet = -1; + char *devname; + + devname = kmalloc(16, GFP_KERNEL); + if (devname) + sprintf( devname, "brcm_%d", interruptId ); + + /* Set the IRQ description to not automatically enable the interrupt at + * the end of an ISR. The driver that handles the interrupt must + * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior + * is consistent with interrupt handling on VxWorks. + */ + irq_desc[interruptId].chip = &brcm_irq_no_end_type; + + if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) + { + nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, + devname, (void *) param ); + } + else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) + { + nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, + devname, (void *) param ); + } + + return( nRet ); +} + + +EXPORT_SYMBOL(enable_brcm_irq); +EXPORT_SYMBOL(disable_brcm_irq); +EXPORT_SYMBOL(request_external_irq); +EXPORT_SYMBOL(BcmHalMapInterrupt); + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c new file mode 100644 index 000000000..44a542d2f --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c @@ -0,0 +1,143 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * prom.c: PROM library initialization code. + * + */ +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/bootmem.h> +#include <linux/blkdev.h> +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <asm/cpu.h> +#include <asm/time.h> + +#include <bcm_map_part.h> +#include <board.h> +#include "boardparms.h" +#include "softdsl/AdslCoreDefs.h" + + +//char arcs_cmdline[CL_SIZE] __initdata = {0}; +/* inv_xde */ +int boot_loader_type; +int prom_argc; +char **prom_argv, **prom_envp; + +extern int do_syslog(int, char *, int); +extern void serial_init(void); +extern void __init InitNvramInfo( void ); +extern void kerSysFlashInit( void ); +extern unsigned long get_nvram_start_addr(void); +void __init create_root_nfs_cmdline( char *cmdline ); + +#define MACH_BCM MACH_BCM96348 + +const char *get_system_type(void) +{ + /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); + + return( pNvramData->szBoardId );*/ + return "brcm63xx"; +} + +unsigned long getMemorySize(void) +{ + unsigned long ulSdramType = BOARD_SDRAM_TYPE; + + unsigned long ulSdramSize; + + switch( ulSdramType ) + { + case BP_MEMORY_16MB_1_CHIP: + case BP_MEMORY_16MB_2_CHIP: + ulSdramSize = 16 * 1024 * 1024; + break; + case BP_MEMORY_32MB_1_CHIP: + case BP_MEMORY_32MB_2_CHIP: + ulSdramSize = 32 * 1024 * 1024; + break; + case BP_MEMORY_64MB_2_CHIP: + ulSdramSize = 64 * 1024 * 1024; + break; + default: + ulSdramSize = 8 * 1024 * 1024; + break; + } + if (boot_loader_type == BOOT_CFE) + return ulSdramSize; + else + // assume that there is one contiguous memory map + return boot_mem_map.map[0].size; +} + +/* -------------------------------------------------------------------------- + Name: prom_init + -------------------------------------------------------------------------- */ +void __init prom_init(void) +{ + extern ulong r4k_interval; + + serial_init(); + + prom_argc = fw_arg0; + prom_argv = (char **) fw_arg1; + prom_envp = (char **) fw_arg2; + + if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) { + strncpy(arcs_cmdline, prom_argv[1], CL_SIZE); + } + + if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) { + boot_loader_type = BOOT_CFE; + } + else { + boot_loader_type = BOOT_REDBOOT; + } + + do_syslog(8, NULL, 8); + + printk( "%s prom init\n", get_system_type() ); + + PERF->IrqMask = 0; + + arcs_cmdline[0] = '\0'; + + if (boot_loader_type == BOOT_CFE) + add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); + else + add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); + + mips_machgroup = MACH_GROUP_BRCM; + mips_machtype = MACH_BCM; + + BpSetBoardId("96348GW-10"); +} + +/* -------------------------------------------------------------------------- + Name: prom_free_prom_memory +Abstract: + -------------------------------------------------------------------------- */ +void __init prom_free_prom_memory(void) +{ + +} + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c new file mode 100644 index 000000000..bd53abb5f --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c @@ -0,0 +1,180 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Broadcom bcm63xx serial port initialization, also prepare for printk + * by registering with console_init + * + */ + +#include <linux/autoconf.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/console.h> +#include <linux/sched.h> + +#include <asm/addrspace.h> +#include <asm/irq.h> +#include <asm/reboot.h> +#include <asm/gdb-stub.h> +#include <asm/mc146818rtc.h> + +#include <bcm_map_part.h> +#include <board.h> + +#define SER63XX_DEFAULT_BAUD 115200 +#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) +#define stUart ((volatile Uart * const) UART_BASE) + +// Transmit interrupts +#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) +// Receive interrupts +#define RXINT (RXFIFONE | RXOVFERR) + +/* -------------------------------------------------------------------------- + Name: serial_init + Purpose: Initalize the UART +-------------------------------------------------------------------------- */ +void __init serial_init(void) +{ + UINT32 tmpVal = SER63XX_DEFAULT_BAUD; + ULONG clockFreqHz; + +#if defined(CONFIG_BCM96345) + // Make sure clock is ticking + PERF->blkEnables |= UART_CLK_EN; +#endif + + /* Dissable channel's receiver and transmitter. */ + stUart->control &= ~(BRGEN|TXEN|RXEN); + + /*--------------------------------------------------------------------*/ + /* Write the table value to the clock select register. */ + /* DPullen - this is the equation to use: */ + /* value = clockFreqHz / baud / 32-1; */ + /* (snmod) Actually you should also take into account any necessary */ + /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ + /* and subtract 1. If 1, just divide by 2 */ + /*--------------------------------------------------------------------*/ + clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; + tmpVal = (clockFreqHz / tmpVal) / 16; + if( tmpVal & 0x01 ) + tmpVal /= 2; //Rounding up, so sub is already accounted for + else + tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 + stUart->baudword = tmpVal; + + /* Finally, re-enable the transmitter and receiver. */ + stUart->control |= (BRGEN|TXEN|RXEN); + + stUart->config = (BITS8SYM | ONESTOP); + // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; + stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; + stUart->intMask = 0; + stUart->intMask = RXINT | TXINT; +} + + +/* prom_putc() + * Output a character to the UART + */ +void prom_putc(char c) +{ + /* Wait for Tx uffer to empty */ + while (! (READ16(stUart->intStatus) & TXFIFOEMT)); + /* Send character */ + stUart->Data = c; +} + +/* prom_puts() + * Write a string to the UART + */ +void prom_puts(const char *s) +{ + while (*s) { + if (*s == '\n') { + prom_putc('\r'); + } + prom_putc(*s++); + } +} + + +/* prom_getc_nowait() + * Returns a character from the UART + * Returns -1 if no characters available or corrupted + */ +int prom_getc_nowait(void) +{ + uint16 uStatus; + int cData = -1; + + uStatus = READ16(stUart->intStatus); + + if (uStatus & RXFIFONE) { /* Do we have a character? */ + cData = READ16(stUart->Data) & 0xff; /* Read character */ + if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ + cData = -1; + } + } + + return cData; +} + +/* prom_getc() + * Returns a charcter from the serial port + * Will block until it receives a valid character +*/ +char prom_getc(void) +{ + int cData = -1; + + /* Loop until we get a valid character */ + while(cData == -1) { + cData = prom_getc_nowait(); + } + return (char) cData; +} + +/* prom_testc() + * Returns 0 if no characters available + */ +int prom_testc(void) +{ + uint16 uStatus; + + uStatus = READ16(stUart->intStatus); + + return (uStatus & RXFIFONE); +} + +#if defined (CONFIG_REMOTE_DEBUG) +/* Prevent other code from writing to the serial port */ +void _putc(char c) { } +void _puts(const char *ptr) { } +#else +/* Low level outputs call prom routines */ +void _putc(char c) { + prom_putc(c); +} +void _puts(const char *ptr) { + prom_puts(ptr); +} +#endif diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c new file mode 100644 index 000000000..4a4fdadba --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c @@ -0,0 +1,523 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Generic setup routines for Broadcom 963xx MIPS boards + */ + +#include <linux/autoconf.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/console.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/pm.h> + +#include <asm/addrspace.h> +#include <asm/bcache.h> +#include <asm/irq.h> +#include <asm/time.h> +#include <asm/reboot.h> +#include <asm/gdb-stub.h> + +extern void brcm_time_init(void); +extern unsigned long getMemorySize(void); + +#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) +#include <linux/pci.h> +#include <linux/delay.h> +#include <bcm_map_part.h> +#include <bcmpci.h> + +static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); +#endif + +/* This function should be in a board specific directory. For now, + * assume that all boards that include this file use a Broadcom chip + * with a soft reset bit in the PLL control register. + */ +static void brcm_machine_restart(char *command) +{ + const unsigned long ulSoftReset = 0x00000001; + unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; + *pulPllCtrl |= ulSoftReset; +} + +static void brcm_machine_halt(void) +{ + printk("System halted\n"); + while (1); +} + +#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) + +static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) +{ + /* write index then value */ + mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; + mpi->pcicfgdata = value; +} + +static uint32 mpi_GetLocalPciConfigReg(uint32 reg) +{ + /* write index then get value */ + mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; + return mpi->pcicfgdata; +} + +/* + * mpi_ResetPcCard: Set/Reset the PcCard + */ +static void mpi_ResetPcCard(int cardtype, BOOL bReset) +{ + if (cardtype == MPI_CARDTYPE_NONE) { + return; + } + + if (cardtype == MPI_CARDTYPE_CARDBUS) { + bReset = ! bReset; + } + + if (bReset) { + mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); + } else { + mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); + } +} + +/* + * mpi_ConfigCs: Configure an MPI/EBI chip select + */ +static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) +{ + mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); + mpi->cs[cs].config = flags; +} + +/* + * mpi_InitPcmciaSpace + */ +static void mpi_InitPcmciaSpace(void) +{ + // ChipSelect 4 controls PCMCIA Memory accesses + mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); + // ChipSelect 5 controls PCMCIA Attribute accesses + mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); + // ChipSelect 6 controls PCMCIA I/O accesses + mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); + + mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | + (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | + (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | + (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); + + mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); +} + +/* + * cardtype_vcc_detect: PC Card's card detect and voltage sense connection + * + * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc + * CCD1# CCD2# CVS1 CVS2 Type + * + * GND GND open open 16-bit 5 vdc + * + * GND GND GND open 16-bit 3.3 vdc + * + * GND GND open GND 16-bit x.x vdc + * + * GND GND GND GND 16-bit 3.3 & x.x vdc + * + *==================================================================== + * + * CVS1 GND CCD1# open CardBus 3.3 vdc + * + * GND CVS2 open CCD2# CardBus x.x vdc + * + * GND CVS1 CCD2# open CardBus y.y vdc + * + * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc + * + * CVS2 GND open CCD1# CardBus x.x & y.y vdc + * + * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc + * + */ +static int cardtype_vcc_detect(void) +{ + uint32 data32; + int cardtype; + + cardtype = MPI_CARDTYPE_NONE; + mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive + // the CVS pins to 0. + data32 = mpi->pcmcia_cntl1; + switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. + { + case 0x00000003: // No Card is in the slot. + printk("mpi: No Card is in the PCMCIA slot\n"); + break; + + case 0x00000002: // Partial insertion, No CD2#. + printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); + break; + + case 0x00000001: // Partial insertion, No CD1#. + printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); + break; + + case 0x00000000: + mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and + // float the CVS pins. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + // Read the Register. + switch (data32 & 0x0000000C) // See what is on the CVS pins. + { + case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. + printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); + cardtype = MPI_CARDTYPE_PCMCIA; + break; + + case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. + // 2 valid voltage options. + switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. + { + case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. + mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. + printk("mpi: Unknown card plugged into slot\n"); + } else { // CCD2 is tied to CVS1. + printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); + cardtype = MPI_CARDTYPE_CARDBUS; + } + break; + + case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000000: // CCD1 and CCD2 are tied to ground. + printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); + cardtype = MPI_CARDTYPE_PCMCIA; + break; + } + break; + + case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. + // 2 valid voltage options. + switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. + { + case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. + mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. + printk("mpi: Unknown card plugged into slot\n"); + } else {// CCD2 is tied to CVS2. + printk("mpi: Detected 3.3 and x.x Cardbus card\n"); + cardtype = MPI_CARDTYPE_CARDBUS; + } + break; + + case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000000: // CCD1 and CCD2 are tied to ground. + cardtype = MPI_CARDTYPE_PCMCIA; + printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); + break; + } + break; + + case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. + // 5 valid voltage options. + + switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. + { + case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. + // CCD1 is tied to ground. + mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000002) { // CCD2 is tied to CVS1. + printk("mpi: Detected y.y vdc Cardbus card\n"); + } else { // CCD2 is tied to CVS2. + printk("mpi: Detected x.x vdc Cardbus card\n"); + } + cardtype = MPI_CARDTYPE_CARDBUS; + break; + + case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. + // CCD2 is tied to ground. + + mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000001) {// CCD1 is tied to CVS1. + printk("mpi: Detected 3.3 vdc Cardbus card\n"); + } else { // CCD1 is tied to CVS2. + printk("mpi: Detected x.x and y.y Cardbus card\n"); + } + cardtype = MPI_CARDTYPE_CARDBUS; + break; + + case 0x00000000: // CCD1 and CCD2 are tied to ground. + cardtype = MPI_CARDTYPE_PCMCIA; + printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); + break; + } + break; + + default: + printk("mpi: Unknown card plugged into slot\n"); + break; + + } + } + return cardtype; +} + +/* + * mpi_DetectPcCard: Detect the plugged in PC-Card + * Return: < 0 => Unknown card detected + * 0 => No card detected + * 1 => 16-bit card detected + * 2 => 32-bit CardBus card detected + */ +static int mpi_DetectPcCard(void) +{ + int cardtype; + + cardtype = cardtype_vcc_detect(); + switch(cardtype) { + case MPI_CARDTYPE_PCMCIA: + mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits + //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); + mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); + mpi_InitPcmciaSpace(); + mpi_ResetPcCard(cardtype, FALSE); + // Hold card in reset for 10ms + mdelay(10); + mpi_ResetPcCard(cardtype, TRUE); + // Let card come out of reset + mdelay(100); + break; + case MPI_CARDTYPE_CARDBUS: + // 8 => CardBus Enable + // 1 => PCI Slot Number + // C => Float VS1 & VS2 + mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | + CARDBUS_ENABLE | + (CARDBUS_SLOT << 8)| + VS2_OEN | + VS1_OEN; + /* access to this memory window will be to/from CardBus */ + mpi->l2pmremap1 |= CARDBUS_MEM; + + // Need to reset the Cardbus Card. There's no CardManager to do this, + // and we need to be ready for PCI configuration. + mpi_ResetPcCard(cardtype, FALSE); + // Hold card in reset for 10ms + mdelay(10); + mpi_ResetPcCard(cardtype, TRUE); + // Let card come out of reset + mdelay(100); + break; + default: + break; + } + return cardtype; +} + +static int mpi_init(void) +{ + unsigned long data; + unsigned int chipid; + unsigned int chiprev; + unsigned int sdramsize; + + chipid = (PERF->RevID & 0xFFFF0000) >> 16; + chiprev = (PERF->RevID & 0xFF); + sdramsize = getMemorySize(); + /* + * Init the pci interface + */ + data = GPIO->GPIOMode; // GPIO mode register + data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus + GPIO->GPIOMode = data; // PCI internal arbiter + + /* + * In the BCM6348 CardBus support is defaulted to Slot 0 + * because there is no external IDSEL for CardBus. To disable + * the CardBus and allow a standard PCI card in Slot 0 + * set the cbus_idsel field to 0x1f. + */ + /* + uData = mpi->pcmcia_cntl1; + uData |= CARDBUS_IDSEL; + mpi->pcmcia_cntl1 = uData; + */ + // Setup PCI I/O Window range. Give 64K to PCI I/O + mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); + // UBUS to PCI I/O base address + mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; + // UBUS to PCI I/O Window remap + mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); + + // enable PCI related GPIO pins and data swap between system and PCI bus + mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); + + /* Enable 6348 BusMaster and Memory access mode */ + data = mpi_GetLocalPciConfigReg(PCI_COMMAND); + data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + mpi_SetLocalPciConfigReg(PCI_COMMAND, data); + + /* Configure two 16 MByte PCI to System memory regions. */ + /* These memory regions are used when PCI device is a bus master */ + /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ + mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); + mpi->sp0remap = 0x0; + + /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ + mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); + mpi->sp1remap = 0x0; + mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); + + if ((chipid == 0x6348) && (chiprev == 0xb0)) { + mpi->sp0range = ~(sdramsize-1); + mpi->sp1range = ~(sdramsize-1); + } + /* + * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity + * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in + * first read. + */ + data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); + data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; + data |= 0x00000080; + mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); + + /* enable pci interrupt */ + mpi->locintstat |= (EXT_PCI_INT << 16); + + mpi_DetectPcCard(); + + ioport_resource.start = BCM_PCI_IO_BASE; + ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; + +#if defined(CONFIG_USB) + PERF->blkEnables |= USBH_CLK_EN; + mdelay(100); + *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; +#endif + + return 0; +} +#endif + +static int __init brcm63xx_setup(void) +{ + extern int panic_timeout; + + _machine_restart = brcm_machine_restart; + _machine_halt = brcm_machine_halt; + pm_power_off = brcm_machine_halt; + + board_time_init = brcm_time_init; + + panic_timeout = 5; + +#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) + /* mpi initialization */ + mpi_init(); +#endif + return 0; +} + +void __init plat_mem_setup(void) +{ + brcm63xx_setup(); +} + +/*************************************************************************** + * C++ New and delete operator functions + ***************************************************************************/ + +/* void *operator new(unsigned int sz) */ +void *_Znwj(unsigned int sz) +{ + return( kmalloc(sz, GFP_KERNEL) ); +} + +/* void *operator new[](unsigned int sz)*/ +void *_Znaj(unsigned int sz) +{ + return( kmalloc(sz, GFP_KERNEL) ); +} + +/* placement new operator */ +/* void *operator new (unsigned int size, void *ptr) */ +void *ZnwjPv(unsigned int size, void *ptr) +{ + return ptr; +} + +/* void operator delete(void *m) */ +void _ZdlPv(void *m) +{ + kfree(m); +} + +/* void operator delete[](void *m) */ +void _ZdaPv(void *m) +{ + kfree(m); +} + +EXPORT_SYMBOL(_Znwj); +EXPORT_SYMBOL(_Znaj); +EXPORT_SYMBOL(ZnwjPv); +EXPORT_SYMBOL(_ZdlPv); +EXPORT_SYMBOL(_ZdaPv); + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h new file mode 100644 index 000000000..b05d98ed9 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h @@ -0,0 +1,2 @@ +#define ADSL_SDRAM_IMAGE_SIZE (384*1024) + diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c new file mode 100644 index 000000000..b615c2842 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c @@ -0,0 +1,114 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Setup time for Broadcom 963xx MIPS boards + */ + +#include <linux/autoconf.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/time.h> +#include <linux/timex.h> + +#include <asm/mipsregs.h> +#include <asm/ptrace.h> +#include <asm/div64.h> +#include <asm/time.h> + +#include <bcm_map_part.h> +#include <bcm_intr.h> + +static unsigned long r4k_offset; /* Amount to increment compare reg each time */ +static unsigned long r4k_cur; /* What counter should be at next timer irq */ + +/* ********************************************************************* + * calculateCpuSpeed() + * Calculate the BCM6348 CPU speed by reading the PLL strap register + * and applying the following formula: + * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) + * Input parameters: + * none + * Return value: + * none + ********************************************************************* */ + +static inline unsigned long __init calculateCpuSpeed(void) +{ + UINT32 pllStrap = PERF->PllStrap; + int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; + int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; + int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; + + return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; +} + + +static inline unsigned long __init cal_r4koff(void) +{ + mips_hpt_frequency = calculateCpuSpeed() / 2; + return (mips_hpt_frequency / HZ); +} + + +/* + * There are a lot of conceptually broken versions of the MIPS timer interrupt + * handler floating around. This one is rather different, but the algorithm + * is provably more robust. + */ +irqreturn_t brcm_timer_interrupt(struct pt_regs *regs) +{ + int irq = MIPS_TIMER_INT; + + irq_enter(); + kstat_this_cpu.irqs[irq]++; + + timer_interrupt(irq, regs); + irq_exit(); + return IRQ_HANDLED; +} + + +void __init brcm_time_init(void) +{ + unsigned int est_freq, flags; + local_irq_save(flags); + + printk("calculating r4koff... "); + r4k_offset = cal_r4koff(); + printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset); + + est_freq = 2 * r4k_offset * HZ; + est_freq += 5000; /* round */ + est_freq -= est_freq % 10000; + printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000, + (est_freq % 1000000) * 100 / 1000000); + local_irq_restore(flags); +} + + +void __init plat_timer_setup(struct irqaction *irq) +{ + r4k_cur = (read_c0_count() + r4k_offset); + write_c0_compare(r4k_cur); + set_c0_status(IE_IRQ5); +} |