summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/patches-3.6/053-mtd-add-nand-flash-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-3.6/053-mtd-add-nand-flash-driver.patch')
-rw-r--r--target/linux/brcm47xx/patches-3.6/053-mtd-add-nand-flash-driver.patch710
1 files changed, 710 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-3.6/053-mtd-add-nand-flash-driver.patch b/target/linux/brcm47xx/patches-3.6/053-mtd-add-nand-flash-driver.patch
new file mode 100644
index 000000000..d37edfdff
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.6/053-mtd-add-nand-flash-driver.patch
@@ -0,0 +1,710 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -607,4 +607,12 @@ config MTD_NAND_FSMC
+ Enables support for NAND Flash chips on the ST Microelectronics
+ Flexible Static Memory Controller (FSMC)
+
++config MTD_NAND_BCM47XX
++ tristate "bcm47xx nand flash support"
++ default y
++ depends on BCM47XX && BCMA_NFLASH
++ select MTD_PARTITIONS
++ help
++ Support for bcm47xx nand flash
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -51,5 +51,6 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mp
+ obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
+ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
++obj-$(CONFIG_MTD_NAND_BCM47XX) += bcm47xx_nand.o
+
+ nand-objs := nand_base.o nand_bbt.o
+--- /dev/null
++++ b/drivers/mtd/nand/bcm47xx_nand.c
+@@ -0,0 +1,528 @@
++/*
++ * BCMA nand flash interface
++ *
++ * Copyright (C) 2011-2012 Tathagata Das <tathagata@alumnux.com>
++ * Copyright 2010, Broadcom Corporation
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ */
++
++#define pr_fmt(fmt) "bcm47xx_nflash: " fmt
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <bcm47xx.h>
++#include <linux/cramfs_fs.h>
++#include <linux/romfs_fs.h>
++#include <linux/magic.h>
++#include <linux/byteorder/generic.h>
++#include <linux/mtd/bcm47xx_nand.h>
++#include <linux/mtd/nand.h>
++
++static int bcm47xx_nflash_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip);
++static int bcm47xx_nflash_erase(struct mtd_info *mtd, unsigned int addr, unsigned int len);
++
++/* Private Global variable */
++static u32 read_offset = 0;
++static u32 write_offset;
++
++static int
++nflash_mtd_poll(struct bcm47xx_nflash *nflash, unsigned int offset, int timeout)
++{
++ unsigned long now = jiffies;
++ int ret = 0;
++
++ for (;;) {
++ if (!bcma_nflash_poll(nflash->bcc)) {
++ ret = 0;
++ break;
++ }
++ if (time_after(jiffies, now + timeout)) {
++ pr_err("timeout while polling\n");
++ ret = -ETIMEDOUT;
++ break;
++ }
++ udelay(1);
++ }
++
++ return ret;
++}
++
++static int
++bcm47xx_nflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
++ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
++ int bytes, ret = 0;
++ u32 extra = 0;
++ u8 *tmpbuf = NULL;
++ int size;
++ u32 offset, blocksize, mask, off;
++ u32 skip_bytes = 0;
++ int need_copy = 0;
++ u8 *ptr = NULL;
++
++ /* Check address range */
++ if (!len)
++ return 0;
++ if ((from + len) > mtd->size)
++ return -EINVAL;
++ offset = from;
++ if ((offset & (NFL_SECTOR_SIZE - 1)) != 0) {
++ extra = offset & (NFL_SECTOR_SIZE - 1);
++ offset -= extra;
++ len += extra;
++ need_copy = 1;
++ }
++ size = (len + (NFL_SECTOR_SIZE - 1)) & ~(NFL_SECTOR_SIZE - 1);
++ if (size != len) {
++ need_copy = 1;
++ }
++ if (!need_copy) {
++ ptr = buf;
++ } else {
++ tmpbuf = (u8 *)kmalloc(size, GFP_KERNEL);
++ ptr = tmpbuf;
++ }
++
++ blocksize = mtd->erasesize;
++ mask = blocksize - 1;
++ *retlen = 0;
++ while (len > 0) {
++ off = offset + skip_bytes;
++ if ((bytes = bcma_nflash_read(nflash->bcc, off, NFL_SECTOR_SIZE, ptr)) < 0) {
++ ret = bytes;
++ goto done;
++ }
++ if (bytes > len)
++ bytes = len;
++ offset += bytes;
++ len -= bytes;
++ ptr += bytes;
++ *retlen += bytes;
++ }
++
++done:
++ if (tmpbuf) {
++ *retlen -= extra;
++ memcpy(buf, tmpbuf+extra, *retlen);
++ kfree(tmpbuf);
++ }
++
++ return ret;
++}
++
++static void bcm47xx_nflash_write(struct mtd_info *mtd, u32 to, const u_char *buf, u32 len)
++{
++ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
++ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
++ u32 offset, blocksize, mask, off;
++ int read_len;
++ u32 copy_len, write_len, from;
++ u_char *write_ptr, *block;
++ const u_char *ptr;
++ int ret, bytes;
++
++ /* Check address range */
++ if (!len) {
++ pr_err("Error: Attempted to write too small data\n");
++ return;
++ }
++
++ if (!to)
++ return;
++
++ if ((to + len) > mtd->size) {
++ pr_err("Error: Attempted to write too large data\n");
++ return;
++ }
++
++ ptr = buf;
++ block = NULL;
++ offset = to;
++ blocksize = mtd->erasesize;
++ if (!(block = kmalloc(blocksize, GFP_KERNEL)))
++ return;
++ mask = blocksize - 1;
++ while (len) {
++ /* Align offset */
++ from = offset & ~mask;
++ /* Copy existing data into holding block if necessary */
++ if (((offset & (blocksize-1)) != 0) || (len < blocksize)) {
++ if ((ret = bcm47xx_nflash_read(mtd, from, blocksize, &read_len, block)))
++ goto done;
++ if (read_len != blocksize) {
++ ret = -EINVAL;
++ goto done;
++ }
++ }
++
++ /* Copy input data into holding block */
++ copy_len = min(len, blocksize - (offset & mask));
++ memcpy(block + (offset & mask), ptr, copy_len);
++ off = (uint) from;
++ /* Erase block */
++ if ((ret = bcm47xx_nflash_erase(mtd, off, blocksize)) < 0)
++ goto done;
++ /* Write holding block */
++ write_ptr = block;
++ write_len = blocksize;
++ if ((bytes = bcma_nflash_write(nflash->bcc, (uint)from, (uint)write_len, (u8 *) write_ptr)) != 0) {
++ ret = bytes;
++ goto done;
++ }
++ offset += copy_len;
++ if (len < copy_len)
++ len = 0;
++ else
++ len -= copy_len;
++ ptr += copy_len;
++ }
++
++done:
++ if (block)
++ kfree(block);
++ return;
++}
++
++static int bcm47xx_nflash_erase(struct mtd_info *mtd, unsigned int addr, unsigned int len)
++{
++ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
++ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
++
++ /* Check address range */
++ if (!len)
++ return 1;
++ if ((addr + len) > mtd->size)
++ return 1;
++
++ if (bcma_nflash_erase(nflash->bcc, addr)) {
++ pr_err("ERASE: nflash erase error\n");
++ return 1;
++ }
++
++ if (nflash_mtd_poll(nflash, addr, 10 * HZ)) {
++ pr_err("ERASE: nflash_mtd_poll error\n");
++ return 1;
++ }
++
++ return 0;
++}
++
++/* This functions is used by upper layer to checks if device is ready */
++static int bcm47xx_nflash_dev_ready(struct mtd_info *mtd)
++{
++ return 1;
++}
++
++/* Issue a nand flash command */
++static inline void bcm47xx_nflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
++{
++ bcma_cc_write32(cc, NAND_CMD_START, opcode);
++ bcma_cc_read32(cc, NAND_CMD_START);
++}
++
++static void bcm47xx_nflash_command(struct mtd_info *mtd, unsigned command,
++ int column, int page_addr)
++{
++ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
++ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
++ u32 pagesize = 1 << nchip->page_shift;
++
++ /* Command pre-processing step */
++ switch (command) {
++ case NAND_CMD_RESET:
++ bcm47xx_nflash_cmd(nflash->bcc, NCMD_FLASH_RESET);
++ break;
++
++ case NAND_CMD_STATUS:
++ nflash->next_opcode = NAND_CMD_STATUS;
++ read_offset = 0;
++ write_offset = 0;
++ break;
++
++ case NAND_CMD_READ0:
++ read_offset = page_addr * pagesize;
++ nflash->next_opcode = 0;
++ break;
++
++ case NAND_CMD_READOOB:
++ read_offset = page_addr * pagesize;
++ nflash->next_opcode = 0;
++ break;
++
++ case NAND_CMD_SEQIN:
++ write_offset = page_addr * pagesize;
++ nflash->next_opcode = 0;
++ break;
++
++ case NAND_CMD_PAGEPROG:
++ nflash->next_opcode = 0;
++ break;
++
++ case NAND_CMD_READID:
++ read_offset = column;
++ bcm47xx_nflash_cmd(nflash->bcc, NCMD_ID_RD);
++ nflash->next_opcode = NAND_DEVID;
++ break;
++
++ case NAND_CMD_ERASE1:
++ nflash->next_opcode = 0;
++ bcm47xx_nflash_erase(mtd, page_addr*pagesize, pagesize);
++ break;
++
++ case NAND_CMD_ERASE2:
++ break;
++
++ case NAND_CMD_RNDOUT:
++ if (column > mtd->writesize)
++ read_offset += (column - mtd->writesize);
++ else
++ read_offset += column;
++ break;
++
++ default:
++ pr_err("COMMAND not supported %x\n", command);
++ nflash->next_opcode = 0;
++ break;
++ }
++}
++
++/* This function is used by upper layer for select and
++ * deselect of the NAND chip.
++ * It is dummy function. */
++static void bcm47xx_nflash_select_chip(struct mtd_info *mtd, int chip)
++{
++}
++
++static u_char bcm47xx_nflash_read_byte(struct mtd_info *mtd)
++{
++ struct nand_chip *nchip = mtd->priv;
++ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
++ uint8_t ret = 0;
++ static u32 id;
++
++ if (nflash->next_opcode == 0)
++ return ret;
++
++ if (nflash->next_opcode == NAND_CMD_STATUS)
++ return NAND_STATUS_WP;
++
++ id = bcma_cc_read32(nflash->bcc, nflash->next_opcode);
++
++ if (nflash->next_opcode == NAND_DEVID) {
++ ret = (id >> (8*read_offset)) & 0xff;
++ read_offset++;
++ }
++
++ return ret;
++}
++
++static uint16_t bcm47xx_nflash_read_word(struct mtd_info *mtd)
++{
++ loff_t from = read_offset;
++ uint16_t buf = 0;
++ int bytes;
++
++ bcm47xx_nflash_read(mtd, from, sizeof(buf), &bytes, (u_char *)&buf);
++ return buf;
++}
++
++/* Write data of length len to buffer buf. The data to be
++ * written on NAND Flash is first copied to RAMbuffer. After the Data Input
++ * Operation by the NFC, the data is written to NAND Flash */
++static void bcm47xx_nflash_write_buf(struct mtd_info *mtd,
++ const u_char *buf, int len)
++{
++ bcm47xx_nflash_write(mtd, write_offset, buf, len);
++}
++
++/* Read the data buffer from the NAND Flash. To read the data from NAND
++ * Flash first the data output cycle is initiated by the NFC, which copies
++ * the data to RAMbuffer. This data of length len is then copied to buffer buf.
++ */
++static void bcm47xx_nflash_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++ loff_t from = read_offset;
++ int bytes;
++
++ bcm47xx_nflash_read(mtd, from, len, &bytes, buf);
++}
++
++/* Used by the upper layer to verify the data in NAND Flash
++ * with the data in the buf. */
++static int bcm47xx_nflash_verify_buf(struct mtd_info *mtd,
++ const u_char *buf, int len)
++{
++ return -EFAULT;
++}
++
++static int bcm47xx_nflash_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
++{
++ struct nand_chip *nchip = mtd->priv;
++ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
++ int i;
++ uint off;
++ u32 pagesize = 1 << nchip->page_shift;
++ u32 blocksize = mtd->erasesize;
++
++ if ((ofs >> 20) >= nflash->size)
++ return 1;
++ if ((ofs & (blocksize - 1)) != 0)
++ return 1;
++
++ for (i = 0; i < 2; i++) {
++ off = ofs + pagesize;
++ bcma_cc_write32(nflash->bcc, NAND_CMD_ADDR, off);
++ bcm47xx_nflash_cmd(nflash->bcc, NCMD_SPARE_RD);
++ if (bcma_nflash_poll(nflash->bcc) < 0)
++ break;
++ if ((bcma_cc_read32(nflash->bcc, NAND_INTFC_STATUS) & NIST_SPARE_VALID) != NIST_SPARE_VALID)
++ return 1;
++ if ((bcma_cc_read32(nflash->bcc, NAND_SPARE_RD0) & 0xff) != 0xff)
++ return 1;
++ }
++ return 0;
++}
++
++const char *part_probes[] = { "cmdlinepart", NULL };
++static int bcm47xx_nflash_probe(struct platform_device *pdev)
++{
++ struct nand_chip *nchip;
++ struct mtd_info *mtd;
++ struct bcm47xx_nflash *nflash = dev_get_platdata(&pdev->dev);
++ int ret = 0;
++
++ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
++ if (!mtd){
++ ret = -ENOMEM;
++ goto err_out;
++ }
++
++ nchip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
++ if (!nchip) {
++ ret = -ENOMEM;
++ goto err_free_mtd;
++ }
++
++ /* Register with MTD */
++ mtd->priv = nchip;
++ mtd->owner = THIS_MODULE;
++ mtd->dev.parent = &pdev->dev;
++
++ /* 50 us command delay time */
++ nchip->chip_delay = 50;
++
++ nchip->priv = nflash;
++ nchip->dev_ready = bcm47xx_nflash_dev_ready;
++ nchip->cmdfunc = bcm47xx_nflash_command;
++ nchip->select_chip = bcm47xx_nflash_select_chip;
++ nchip->read_byte = bcm47xx_nflash_read_byte;
++ nchip->read_word = bcm47xx_nflash_read_word;
++ nchip->write_buf = bcm47xx_nflash_write_buf;
++ nchip->read_buf = bcm47xx_nflash_read_buf;
++ nchip->verify_buf = bcm47xx_nflash_verify_buf;
++ nchip->block_bad = bcm47xx_nflash_block_bad;
++ nchip->options = NAND_SKIP_BBTSCAN;
++
++ /* Not known */
++ nchip->ecc.mode = NAND_ECC_NONE;
++
++ /* first scan to find the device and get the page size */
++ if (nand_scan_ident(mtd, 1, NULL)) {
++ pr_err("nand_scan_ident failed\n");
++ ret = -ENXIO;
++ goto err_free_nchip;
++ }
++ nflash->size = mtd->size;
++ nflash->pagesize = 1 << nchip->page_shift;
++ nflash->blocksize = mtd->erasesize;
++ nflash->mtd = mtd;
++
++ /* second phase scan */
++ if (nand_scan_tail(mtd)) {
++ pr_err("nand_scan_tail failed\n");
++ ret = -ENXIO;
++ goto err_free_nchip;
++ }
++
++ mtd->name = "bcm47xx-nflash";
++ mtd->flags |= MTD_WRITEABLE;
++ ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
++
++ if (ret) {
++ pr_err("mtd_device_register failed\n");
++ goto err_free_nchip;
++ }
++
++ return 0;
++
++err_free_nchip:
++ kfree(nchip);
++err_free_mtd:
++ kfree(mtd);
++err_out:
++ return ret;
++}
++
++static int __devexit bcm47xx_nflash_remove(struct platform_device *pdev)
++{
++ struct bcm47xx_nflash *nflash = dev_get_platdata(&pdev->dev);
++ struct mtd_info *mtd = nflash->mtd;
++
++ if (nflash) {
++ /* Release resources, unregister device */
++ nand_release(mtd);
++ kfree(mtd->priv);
++ kfree(mtd);
++ }
++
++ return 0;
++}
++
++static const struct platform_device_id bcm47xx_nflash_table[] = {
++ { "bcm47xx-nflash", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(platform, bcm47xx_nflash_table);
++
++static struct platform_driver bcm47xx_nflash_driver = {
++ .id_table = bcm47xx_nflash_table,
++ .probe = bcm47xx_nflash_probe,
++ .remove = __devexit_p(bcm47xx_nflash_remove),
++ .driver = {
++ .name = "bcm47xx-nflash",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init init_bcm47xx_nflash(void)
++{
++ int ret = platform_driver_register(&bcm47xx_nflash_driver);
++
++ if (ret)
++ pr_err("error registering platform driver: %i\n", ret);
++ return ret;
++}
++
++static void __exit exit_bcm47xx_nflash(void)
++{
++ platform_driver_unregister(&bcm47xx_nflash_driver);
++}
++
++module_init(init_bcm47xx_nflash);
++module_exit(exit_bcm47xx_nflash);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("BCM47XX NAND flash driver");
+--- /dev/null
++++ b/include/linux/mtd/bcm47xx_nand.h
+@@ -0,0 +1,152 @@
++/*
++ * Broadcom chipcommon NAND flash interface
++ *
++ * Copyright (C) 2011-2012 Tathagata Das <tathagata@alumnux.com>
++ * Copyright (C) 2009, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ */
++
++#ifndef LINUX_MTD_BCM47XX_NAND_H_
++#define LINUX_MTD_BCM47XX_NAND_H_
++
++#include <linux/mtd/mtd.h>
++
++#define NAND_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
++
++/* nand_cmd_start commands */
++#define NCMD_NULL 0
++#define NCMD_PAGE_RD 1
++#define NCMD_SPARE_RD 2
++#define NCMD_STATUS_RD 3
++#define NCMD_PAGE_PROG 4
++#define NCMD_SPARE_PROG 5
++#define NCMD_COPY_BACK 6
++#define NCMD_ID_RD 7
++#define NCMD_BLOCK_ERASE 8
++#define NCMD_FLASH_RESET 9
++#define NCMD_LOCK 0xa
++#define NCMD_LOCK_DOWN 0xb
++#define NCMD_UNLOCK 0xc
++#define NCMD_LOCK_STATUS 0xd
++
++/* nand_acc_control */
++#define NAC_RD_ECC_EN 0x80000000
++#define NAC_WR_ECC_EN 0x40000000
++#define NAC_RD_ECC_BLK0_EN 0x20000000
++#define NAC_FAST_PGM_RDIN 0x10000000
++#define NAC_RD_ERASED_ECC_EN 0x08000000
++#define NAC_PARTIAL_PAGE_EN 0x04000000
++#define NAC_PAGE_HIT_EN 0x01000000
++#define NAC_ECC_LEVEL0 0x00f00000
++#define NAC_ECC_LEVEL 0x000f0000
++#define NAC_SPARE_SIZE0 0x00003f00
++#define NAC_SPARE_SIZE 0x0000003f
++
++/* nand_config */
++#define NCF_CONFIG_LOCK 0x80000000
++#define NCF_BLOCK_SIZE_MASK 0x70000000
++#define NCF_BLOCK_SIZE_SHIFT 28
++#define NCF_DEVICE_SIZE_MASK 0x0f000000
++#define NCF_DEVICE_SIZE_SHIFT 24
++#define NCF_DEVICE_WIDTH 0x00800000
++#define NCF_PAGE_SIZE_MASK 0x00300000
++#define NCF_PAGE_SIZE_SHIFT 20
++#define NCF_FULL_ADDR_BYTES_MASK 0x00070000
++#define NCF_FULL_ADDR_BYTES_SHIFT 16
++#define NCF_COL_ADDR_BYTES_MASK 0x00007000
++#define NCF_COL_ADDR_BYTES_SHIFT 12
++#define NCF_BLK_ADDR_BYTES_MASK 0x00000700
++#define NCF_BLK_ADDR_BYTES_SHIFT 8
++
++/* nand_intfc_status */
++#define NIST_CTRL_READY 0x80000000
++#define NIST_FLASH_READY 0x40000000
++#define NIST_CACHE_VALID 0x20000000
++#define NIST_SPARE_VALID 0x10000000
++#define NIST_ERASED 0x08000000
++#define NIST_STATUS 0x000000ff
++
++#define NFL_SECTOR_SIZE 512
++
++#define NFL_TABLE_END 0xffffffff
++#define NFL_BOOT_SIZE 0x200000
++#define NFL_BOOT_OS_SIZE 0x2000000
++
++/* Nand flash MLC controller registers (corerev >= 38) */
++#define NAND_REVISION 0xC00
++#define NAND_CMD_START 0xC04
++#define NAND_CMD_ADDR_X 0xC08
++#define NAND_CMD_ADDR 0xC0C
++#define NAND_CMD_END_ADDR 0xC10
++#define NAND_CS_NAND_SELECT 0xC14
++#define NAND_CS_NAND_XOR 0xC18
++#define NAND_SPARE_RD0 0xC20
++#define NAND_SPARE_RD4 0xC24
++#define NAND_SPARE_RD8 0xC28
++#define NAND_SPARE_RD12 0xC2C
++#define NAND_SPARE_WR0 0xC30
++#define NAND_SPARE_WR4 0xC34
++#define NAND_SPARE_WR8 0xC38
++#define NAND_SPARE_WR12 0xC3C
++#define NAND_ACC_CONTROL 0xC40
++#define NAND_CONFIG 0xC48
++#define NAND_TIMING_1 0xC50
++#define NAND_TIMING_2 0xC54
++#define NAND_SEMAPHORE 0xC58
++#define NAND_DEVID 0xC60
++#define NAND_DEVID_X 0xC64
++#define NAND_BLOCK_LOCK_STATUS 0xC68
++#define NAND_INTFC_STATUS 0xC6C
++#define NAND_ECC_CORR_ADDR_X 0xC70
++#define NAND_ECC_CORR_ADDR 0xC74
++#define NAND_ECC_UNC_ADDR_X 0xC78
++#define NAND_ECC_UNC_ADDR 0xC7C
++#define NAND_READ_ERROR_COUNT 0xC80
++#define NAND_CORR_STAT_THRESHOLD 0xC84
++#define NAND_READ_ADDR_X 0xC90
++#define NAND_READ_ADDR 0xC94
++#define NAND_PAGE_PROGRAM_ADDR_X 0xC98
++#define NAND_PAGE_PROGRAM_ADDR 0xC9C
++#define NAND_COPY_BACK_ADDR_X 0xCA0
++#define NAND_COPY_BACK_ADDR 0xCA4
++#define NAND_BLOCK_ERASE_ADDR_X 0xCA8
++#define NAND_BLOCK_ERASE_ADDR 0xCAC
++#define NAND_INV_READ_ADDR_X 0xCB0
++#define NAND_INV_READ_ADDR 0xCB4
++#define NAND_BLK_WR_PROTECT 0xCC0
++#define NAND_ACC_CONTROL_CS1 0xCD0
++#define NAND_CONFIG_CS1 0xCD4
++#define NAND_TIMING_1_CS1 0xCD8
++#define NAND_TIMING_2_CS1 0xCDC
++#define NAND_SPARE_RD16 0xD30
++#define NAND_SPARE_RD20 0xD34
++#define NAND_SPARE_RD24 0xD38
++#define NAND_SPARE_RD28 0xD3C
++#define NAND_CACHE_ADDR 0xD40
++#define NAND_CACHE_DATA 0xD44
++#define NAND_CTRL_CONFIG 0xD48
++#define NAND_CTRL_STATUS 0xD4C
++
++struct bcma_drv_cc;
++
++struct bcm47xx_nflash {
++ struct bcma_drv_cc *bcc;
++
++ bool present;
++ bool boot; /* This is the flash the SoC boots from */
++ u32 blocksize; /* Block size */
++ u32 pagesize; /* Page size */
++
++ u32 size; /* Total size in bytes */
++ u32 next_opcode; /* Next expected command from upper NAND layer */
++
++ struct mtd_info *mtd;
++};
++
++#endif /* LINUX_MTD_BCM47XX_NAND_H_ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-03 06:31:52 +0000