1 files changed, 0 insertions, 51 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch b/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch
deleted file mode 100644
index 4f47a3c52..000000000
--- a/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore
- 	.pci_ops	= &ssb_pcicore_pciops,
- 	.io_resource	= &ssb_pcicore_io_resource,
- 	.mem_resource	= &ssb_pcicore_mem_resource,
--	.mem_offset	= 0x24000000,
- };
- 
--static u32 ssb_pcicore_pcibus_iobase = 0x100;
--static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
--
- /* This function is called when doing a pci_enable_device().
-  * We must first check if the device is a device on the PCI-core bridge. */
- int ssb_pcicore_plat_dev_init(struct pci_dev *d)
- {
--	struct resource *res;
--	int pos, size;
--	u32 *base;
--
- 	if (d->bus->ops != &ssb_pcicore_pciops) {
- 		/* This is not a device on the PCI-core bridge. */
- 		return -ENODEV;
-@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci
- 	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
- 		   pci_name(d));
- 
--	/* Fix up resource bases */
--	for (pos = 0; pos < 6; pos++) {
--		res = &d->resource[pos];
--		if (res->flags & IORESOURCE_IO)
--			base = &ssb_pcicore_pcibus_iobase;
--		else
--			base = &ssb_pcicore_pcibus_membase;
--		res->flags |= IORESOURCE_PCI_FIXED;
--		if (res->end) {
--			size = res->end - res->start + 1;
--			if (*base & (size - 1))
--				*base = (*base + size) & ~(size - 1);
--			res->start = *base;
--			res->end = res->start + size - 1;
--			*base += size;
--			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
--		}
--		/* Fix up PCI bridge BAR0 only */
--		if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
--			break;
--	}
- 	/* Fix up interrupt lines */
- 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
- 	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);