summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm-2.4/base-files/default/etc
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm-2.4/base-files/default/etc')
-rw-r--r--target/linux/brcm-2.4/base-files/default/etc/diag.sh28
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/default/etc/init.d/netconfig154
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/default/etc/preinit.arch58
3 files changed, 0 insertions, 240 deletions
diff --git a/target/linux/brcm-2.4/base-files/default/etc/diag.sh b/target/linux/brcm-2.4/base-files/default/etc/diag.sh
deleted file mode 100644
index 3b08554c6..000000000
--- a/target/linux/brcm-2.4/base-files/default/etc/diag.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-set_led() {
- local led="$1"
- local state="$2"
- [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
-}
-
-set_state() {
- case "$1" in
- preinit)
- set_led dmz 1
- set_led diag 1
- set_led power 0
- ;;
- failsafe)
- set_led diag f
- set_led power f
- set_led dmz f
- ;;
- done)
- set_led dmz 0
- set_led diag 0
- set_led power 1
- ;;
- esac
-}
diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
deleted file mode 100755
index 643ba35d3..000000000
--- a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
- [ -e /etc/config/network ] && exit 0
-
- mkdir -p /etc/config
-
- (
- if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
- # WGT634u
- echo boardtype=wgt634u
- else
- strings "$(find_mtd_part nvram)"
- fi
- ) | awk '
- function p(cfgname, name) {
- if (c[name] != "") print " option " cfgname " \"" c[name] "\""
- }
-
- function macinc(mac, maca, i, result) {
- split(mac, maca, ":")
- for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
- if (++maca[6] > 0xff) {
- maca[5]++
- maca[6] = 0
- }
- for (i = 1; i <= 6; i++) {
- if (i != 1) result = result ":"
- result = result sprintf("%02x", maca[i])
- }
- return result
- }
-
- BEGIN {
- FS="="
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5*"
- c["vlan1ports"]="0 5"
- getline < "/proc/diag/model"
- model=$0
- for (i = 0; i < 6; i++) {
- if (mac_check != "") mac_check = mac_check ":"
- mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
- }
- }
-
- ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
- nvram[$1] = $2
- }
-
- END {
- if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth1"
- }
- if (model == "ASUS WL-500g") {
- c["wan_ifname"] = "eth1"
- c["lan_ifname"] = "eth0"
- }
- if (model == "Dell TrueMobile 2300") {
- c["vlan0ports"] = "0 1 2 3 5*"
- c["vlan1ports"] = "4 5"
- }
- if (nvram["boardtype"] == "bcm94710r4") {
- # Toshiba WRC-1000
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
- if (nvram["boardtype"] == "wgt634u") {
- c["vlan0ports"] = "0 1 2 3 5*"
- c["vlan1ports"] = "4 5"
- }
- if (nvram["boardtype"] == "0x0467") {
- c["vlan0ports"] = "0 1 2 3 5*"
- c["vlan1ports"] = "4 5"
- }
- if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
- if (nvram["boardnum"] == "45") {
- # WL-500gP
- c["vlan0ports"] = "1 2 3 4 5*"
- c["vlan1ports"] = "0 5"
- } else {
- # Generic BCM94704
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
-
- # MAC addresses on 4704 tend to be screwed up. Add a workaround here
- if (nvram["et0macaddr"] ~ mac_check) {
- c["lan_macaddr"] = nvram["et0macaddr"]
- c["wan_macaddr"] = macinc(c["lan_macaddr"])
- }
- }
- }
-
- # WAP54G
- if ((nvram["boardnum"] == "2") || \
- (nvram["boardnum"] == "1024")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # ASUS WL-700gE
- # These are actually same as defaults above. For some reason this script applies
- # Generic BCM94704 settings instead so we revert to proper settings here.
- # Hopefully someone will fix this properly soon.
- if (model == "ASUS WL-700gE") {
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5*"
- c["vlan1ports"]="0 5"
- }
-
- if (model == "Motorola WR850G V2/V3") {
- c["vlan0ports"]="0 1 2 3 5*"
- c["vlan1ports"]="4 5"
- }
-
- print "#### VLAN configuration "
- print "config switch eth0"
- p("vlan0", "vlan0ports")
- p("vlan1", "vlan1ports")
- print ""
- print ""
- print "#### Loopback configuration"
- print "config interface loopback"
- print " option ifname \"lo\""
- print " option proto static"
- print " option ipaddr 127.0.0.1"
- print " option netmask 255.0.0.0"
- print ""
- print ""
- print "#### LAN configuration"
- print "config interface lan"
- print " option type bridge"
- p("ifname", "lan_ifname")
- p("macaddr", "lan_macaddr")
- print " option proto static"
- print " option ipaddr 192.168.1.1"
- print " option netmask 255.255.255.0"
- print ""
- print ""
- print "#### WAN configuration"
- print "config interface wan"
- p("ifname", "wan_ifname")
- p("macaddr", "wan_macaddr")
- print " option proto dhcp"
- }' > /etc/config/network
-}
diff --git a/target/linux/brcm-2.4/base-files/default/etc/preinit.arch b/target/linux/brcm-2.4/base-files/default/etc/preinit.arch
deleted file mode 100755
index 43df591ab..000000000
--- a/target/linux/brcm-2.4/base-files/default/etc/preinit.arch
+++ /dev/null
@@ -1,58 +0,0 @@
-. /etc/functions.sh
-
-failsafe() {
- lock /tmp/.failsafe
- failsafe_ip
-
- echo "0 1 2 3 4 5u*" > /proc/switch/eth0/vlan/0/ports
-
- set_state failsafe
- [ -x "/usr/sbin/nvram" ] && {
- [ "$(nvram get boot_wait)" != "on" ] && {
- nvram set boot_wait=on
- nvram commit
- }
- }
-
- netmsg 192.168.1.255 "Entering Failsafe!"
- telnetd -l /bin/login <> /dev/null 2>&1
-
- ash --login
-}
-
-mount none /proc -t proc
-
-insmod diag
-set_state preinit
-echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
-
-ifname=eth0
-
-# hardware specific overrides
-case "$(cat /proc/diag/model)" in
- "Linksys WAP54G V1") ifname=eth1;;
- "ASUS WL-HDD") ifname=eth1;;
- "ASUS WL-300g") ifname=eth1;;
- "ASUS (unknown, BCM4702)") ifname=eth1;;
-esac
-
-failsafe_ip
-
-insmod switch-core
-insmod switch-robo || insmod switch-adm || rmmod switch-core
-
-[ -d /proc/switch/eth0 ] && {
- echo 1 > /proc/switch/eth0/reset
-
- # this would be easier if we blasted the message across all ports
- # but we don't want packets leaking across interfaces
- for port in $(seq 0 4); do {
- echo "$port 5u*" > /proc/switch/eth0/vlan/0/ports
- netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
- }; done
-} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
-
-ifconfig $ifname 0.0.0.0 down
-
-sleep 2
-