diff options
Diffstat (limited to 'target/linux/atheros-2.6/patches/110-spiflash.patch')
| -rw-r--r-- | target/linux/atheros-2.6/patches/110-spiflash.patch | 750 |
1 files changed, 750 insertions, 0 deletions
diff --git a/target/linux/atheros-2.6/patches/110-spiflash.patch b/target/linux/atheros-2.6/patches/110-spiflash.patch new file mode 100644 index 000000000..a8fc4af8e --- /dev/null +++ b/target/linux/atheros-2.6/patches/110-spiflash.patch @@ -0,0 +1,750 @@ +diff -urN linux.old/drivers/mtd/devices/Kconfig linux.dev/drivers/mtd/devices/Kconfig +--- linux.old/drivers/mtd/devices/Kconfig 2006-11-29 22:57:37.000000000 +0100 ++++ linux.dev/drivers/mtd/devices/Kconfig 2006-12-15 00:03:11.000000000 +0100 +@@ -68,6 +68,10 @@ + used for program and data storage. Set up your spi devices + with the right board-specific platform data. + ++config MTD_SPIFLASH ++ tristate "Atheros AR2315/6/7 SPI Flash support" ++ depends on MTD && AR531X_COBRA ++ + config MTD_SLRAM + tristate "Uncached system RAM" + depends on MTD +diff -urN linux.old/drivers/mtd/devices/Makefile linux.dev/drivers/mtd/devices/Makefile +--- linux.old/drivers/mtd/devices/Makefile 2006-11-29 22:57:37.000000000 +0100 ++++ linux.dev/drivers/mtd/devices/Makefile 2006-12-15 00:03:11.000000000 +0100 +@@ -17,3 +17,4 @@ + obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o + obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o + obj-$(CONFIG_MTD_M25P80) += m25p80.o ++obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o +diff -urN linux.old/drivers/mtd/devices/spiflash.c linux.dev/drivers/mtd/devices/spiflash.c +--- linux.old/drivers/mtd/devices/spiflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/mtd/devices/spiflash.c 2006-12-15 08:26:11.000000000 +0100 +@@ -0,0 +1,595 @@ ++ ++/* ++ * MTD driver for the SPI Flash Memory support. ++ * ++ * Copyright (c) 2005-2006 Atheros Communications Inc. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++/*=========================================================================== ++** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT ++** ++** This module contains the Serial Flash access routines for the Atheros SOC. ++** The Atheros SOC integrates a SPI flash controller that is used to access ++** serial flash parts. The SPI flash controller executes in "Little Endian" ++** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be ++** BYTESWAPPED! The SPI Flash controller hardware by default performs READ ++** ONLY byteswapping when accessed via the SPI Flash Alias memory region ++** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the ++** flash sectors is stored in "Little Endian" format. ++** ++** The spiflash_write() routine performs byteswapping on all write ++** operations. ++**===========================================================================*/ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/version.h> ++#include <linux/errno.h> ++#include <linux/slab.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> ++#include <linux/squashfs_fs.h> ++#include <linux/root_dev.h> ++#include <asm/delay.h> ++#include <asm/io.h> ++#include "spiflash.h" ++ ++/* debugging */ ++/* #define SPIFLASH_DEBUG */ ++ ++#ifndef __BIG_ENDIAN ++#error This driver currently only works with big endian CPU. ++#endif ++ ++#define MAX_PARTS 32 ++ ++static char module_name[] = "spiflash"; ++ ++#define MIN(a,b) ((a) < (b) ? (a) : (b)) ++#define FALSE 0 ++#define TRUE 1 ++ ++#define ROOTFS_NAME "rootfs" ++ ++static __u32 spiflash_regread32(int reg); ++static void spiflash_regwrite32(int reg, __u32 data); ++static __u32 spiflash_sendcmd (int op); ++ ++static void __init spidata_init(void); ++int __init spiflash_init (void); ++void __exit spiflash_exit (void); ++static int spiflash_probe (void); ++static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr); ++static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf); ++static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf); ++ ++/* Flash configuration table */ ++struct flashconfig { ++ __u32 byte_cnt; ++ __u32 sector_cnt; ++ __u32 sector_size; ++ __u32 cs_addrmask; ++} flashconfig_tbl[MAX_FLASH] = ++ { ++ { 0, 0, 0, 0}, ++ { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0}, ++ { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0}, ++ { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0}, ++ { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0} ++ }; ++ ++/* Mapping of generic opcodes to STM serial flash opcodes */ ++struct opcodes { ++ __u16 code; ++ __s8 tx_cnt; ++ __s8 rx_cnt; ++} stm_opcodes[] = { ++ {STM_OP_WR_ENABLE, 1, 0}, ++ {STM_OP_WR_DISABLE, 1, 0}, ++ {STM_OP_RD_STATUS, 1, 1}, ++ {STM_OP_WR_STATUS, 1, 0}, ++ {STM_OP_RD_DATA, 4, 4}, ++ {STM_OP_FAST_RD_DATA, 1, 0}, ++ {STM_OP_PAGE_PGRM, 8, 0}, ++ {STM_OP_SECTOR_ERASE, 4, 0}, ++ {STM_OP_BULK_ERASE, 1, 0}, ++ {STM_OP_DEEP_PWRDOWN, 1, 0}, ++ {STM_OP_RD_SIG, 4, 1} ++}; ++ ++/* Driver private data structure */ ++struct spiflash_data { ++ struct mtd_info *mtd; ++ struct mtd_partition *parsed_parts; /* parsed partitions */ ++ void *spiflash_readaddr; /* memory mapped data for read */ ++ void *spiflash_mmraddr; /* memory mapped register space */ ++ spinlock_t mutex; ++}; ++ ++static struct spiflash_data *spidata; ++ ++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts); ++ ++/***************************************************************************************************/ ++ ++static __u32 ++spiflash_regread32(int reg) ++{ ++ volatile __u32 *data = (__u32 *)(spidata->spiflash_mmraddr + reg); ++ ++ return (*data); ++} ++ ++static void ++spiflash_regwrite32(int reg, __u32 data) ++{ ++ volatile __u32 *addr = (__u32 *)(spidata->spiflash_mmraddr + reg); ++ ++ *addr = data; ++ return; ++} ++ ++static __u32 ++spiflash_sendcmd (int op) ++{ ++ __u32 reg; ++ __u32 mask; ++ struct opcodes *ptr_opcode; ++ ++ ptr_opcode = &stm_opcodes[op]; ++ ++ do { ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ spiflash_regwrite32(SPI_FLASH_OPCODE, ptr_opcode->code); ++ ++ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | ++ (ptr_opcode->rx_cnt << 4) | SPI_CTL_START; ++ ++ spiflash_regwrite32(SPI_FLASH_CTL, reg); ++ ++ if (ptr_opcode->rx_cnt > 0) { ++ do { ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); ++ ++ switch (ptr_opcode->rx_cnt) { ++ case 1: ++ mask = 0x000000ff; ++ break; ++ case 2: ++ mask = 0x0000ffff; ++ break; ++ case 3: ++ mask = 0x00ffffff; ++ break; ++ default: ++ mask = 0xffffffff; ++ break; ++ } ++ ++ reg &= mask; ++ } ++ else { ++ reg = 0; ++ } ++ ++ return reg; ++} ++ ++/* Probe SPI flash device ++ * Function returns 0 for failure. ++ * and flashconfig_tbl array index for success. ++ */ ++static int ++spiflash_probe (void) ++{ ++ __u32 sig; ++ int flash_size; ++ ++ if (!spidata) ++ spidata_init(); ++ ++ if (!spidata) /* init failed */ ++ return 0; ++ ++ /* Read the signature on the flash device */ ++ sig = spiflash_sendcmd(SPI_RD_SIG); ++ ++ switch (sig) { ++ case STM_8MBIT_SIGNATURE: ++ flash_size = FLASH_1MB; ++ break; ++ case STM_16MBIT_SIGNATURE: ++ flash_size = FLASH_2MB; ++ break; ++ case STM_32MBIT_SIGNATURE: ++ flash_size = FLASH_4MB; ++ break; ++ case STM_64MBIT_SIGNATURE: ++ flash_size = FLASH_8MB; ++ break; ++ default: ++ printk (KERN_WARNING "%s: Read of flash device signature failed!\n", module_name); ++ return (0); ++ } ++ ++ return (flash_size); ++} ++ ++ ++static int ++spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) ++{ ++ struct opcodes *ptr_opcode; ++ __u32 temp, reg; ++ int finished = FALSE; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n",__FUNCTION__,instr->addr,instr->len); ++#endif ++ ++ /* sanity checks */ ++ if (instr->addr + instr->len > mtd->size) return (-EINVAL); ++ ++ ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE]; ++ ++ temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code); ++ spin_lock(&spidata->mutex); ++ spiflash_sendcmd(SPI_WRITE_ENABLE); ++ do { ++ schedule(); ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ spiflash_regwrite32(SPI_FLASH_OPCODE, temp); ++ ++ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START; ++ spiflash_regwrite32(SPI_FLASH_CTL, reg); ++ ++ do { ++ schedule(); ++ reg = spiflash_sendcmd(SPI_RD_STATUS); ++ if (!(reg & SPI_STATUS_WIP)) { ++ finished = TRUE; ++ } ++ } while (!finished); ++ spin_unlock(&spidata->mutex); ++ ++ instr->state = MTD_ERASE_DONE; ++ if (instr->callback) instr->callback (instr); ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s return\n",__FUNCTION__); ++#endif ++ return (0); ++} ++ ++static int ++spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf) ++{ ++ u_char *read_addr; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) from,(int)len); ++#endif ++ ++ /* sanity checks */ ++ if (!len) return (0); ++ if (from + len > mtd->size) return (-EINVAL); ++ ++ ++ /* we always read len bytes */ ++ *retlen = len; ++ ++ read_addr = (u_char *)(spidata->spiflash_readaddr + from); ++ spin_lock(&spidata->mutex); ++ memcpy(buf, read_addr, len); ++ spin_unlock(&spidata->mutex); ++ ++ return (0); ++} ++ ++static int ++spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf) ++{ ++ int done = FALSE, page_offset, bytes_left, finished; ++ __u32 xact_len, spi_data = 0, opcode, reg; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) to,len); ++#endif ++ ++ *retlen = 0; ++ ++ /* sanity checks */ ++ if (!len) return (0); ++ if (to + len > mtd->size) return (-EINVAL); ++ ++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code; ++ bytes_left = len; ++ ++ while (done == FALSE) { ++ xact_len = MIN(bytes_left, sizeof(__u32)); ++ ++ /* 32-bit writes cannot span across a page boundary ++ * (256 bytes). This types of writes require two page ++ * program operations to handle it correctly. The STM part ++ * will write the overflow data to the beginning of the ++ * current page as opposed to the subsequent page. ++ */ ++ page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len; ++ ++ if (page_offset > STM_PAGE_SIZE) { ++ xact_len -= (page_offset - STM_PAGE_SIZE); ++ } ++ ++ spin_lock(&spidata->mutex); ++ spiflash_sendcmd(SPI_WRITE_ENABLE); ++ ++ do { ++ schedule(); ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ switch (xact_len) { ++ case 1: ++ spi_data = (u32) ((u8) *buf); ++ break; ++ case 2: ++ spi_data = (buf[1] << 8) | buf[0]; ++ break; ++ case 3: ++ spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0]; ++ break; ++ case 4: ++ spi_data = (buf[3] << 24) | (buf[2] << 16) | ++ (buf[1] << 8) | buf[0]; ++ break; ++ default: ++ printk("spiflash_write: default case\n"); ++ break; ++ } ++ ++ spiflash_regwrite32(SPI_FLASH_DATA, spi_data); ++ opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8); ++ spiflash_regwrite32(SPI_FLASH_OPCODE, opcode); ++ ++ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START; ++ spiflash_regwrite32(SPI_FLASH_CTL, reg); ++ finished = FALSE; ++ ++ do { ++ schedule(); ++ reg = spiflash_sendcmd(SPI_RD_STATUS); ++ if (!(reg & SPI_STATUS_WIP)) { ++ finished = TRUE; ++ } ++ } while (!finished); ++ spin_unlock(&spidata->mutex); ++ ++ bytes_left -= xact_len; ++ to += xact_len; ++ buf += xact_len; ++ ++ *retlen += xact_len; ++ ++ if (bytes_left == 0) { ++ done = TRUE; ++ } ++ } ++ ++ return (0); ++} ++ ++static void __init spidata_init(void) ++{ ++ if (spidata) ++ return; ++ ++ spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL); ++ spin_lock_init(&spidata->mutex); ++ ++ if (!spidata) ++ return; ++ ++ spidata->spiflash_mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); ++ ++ if (!spidata->spiflash_mmraddr) { ++ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name); ++ kfree(spidata); ++ spidata = NULL; ++ } ++} ++ ++#ifdef CONFIG_MTD_PARTITIONS ++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; ++#endif ++ ++int __init ++spiflash_init (void) ++{ ++ int result = -1, i, j; ++ u32 len; ++ int index, num_parts; ++ struct mtd_info *mtd; ++ struct mtd_partition *mtd_parts; ++ char *buf; ++ struct mtd_partition *part; ++ struct squashfs_super_block *sb; ++ u32 config_start; ++ ++ spidata_init(); ++ ++ if (!spidata) ++ return (-ENXIO); ++ ++ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); ++ if (!mtd) { ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ ++ printk ("MTD driver for SPI flash.\n"); ++ printk ("%s: Probing for Serial flash ...\n", module_name); ++ if (!(index = spiflash_probe ())) { ++ printk (KERN_WARNING "%s: Found no serial flash device\n", module_name); ++ kfree(mtd); ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ ++ printk ("%s: Found SPI serial Flash.\n", module_name); ++ ++ spidata->spiflash_readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); ++ if (!spidata->spiflash_readaddr) { ++ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name); ++ kfree(mtd); ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ ++ mtd->name = module_name; ++ mtd->type = MTD_NORFLASH; ++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); ++ mtd->size = flashconfig_tbl[index].byte_cnt; ++ mtd->erasesize = flashconfig_tbl[index].sector_size; ++ mtd->writesize = 1; ++ mtd->numeraseregions = 0; ++ mtd->eraseregions = NULL; ++ mtd->erase = spiflash_erase; ++ mtd->read = spiflash_read; ++ mtd->write = spiflash_write; ++ mtd->owner = THIS_MODULE; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG ++ "mtd->name = %s\n" ++ "mtd->size = 0x%.8x (%uM)\n" ++ "mtd->erasesize = 0x%.8x (%uK)\n" ++ "mtd->numeraseregions = %d\n", ++ mtd->name, ++ mtd->size, mtd->size / (1024*1024), ++ mtd->erasesize, mtd->erasesize / 1024, ++ mtd->numeraseregions); ++ ++ if (mtd->numeraseregions) { ++ for (result = 0; result < mtd->numeraseregions; result++) { ++ printk (KERN_DEBUG ++ "\n\n" ++ "mtd->eraseregions[%d].offset = 0x%.8x\n" ++ "mtd->eraseregions[%d].erasesize = 0x%.8x (%uK)\n" ++ "mtd->eraseregions[%d].numblocks = %d\n", ++ result,mtd->eraseregions[result].offset, ++ result,mtd->eraseregions[result].erasesize,mtd->eraseregions[result].erasesize / 1024, ++ result,mtd->eraseregions[result].numblocks); ++ } ++ } ++#endif ++ ++ /* parse redboot partitions */ ++ num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0); ++ ++ mtd_parts = kzalloc(sizeof(struct mtd_partition) * MAX_PARTS, GFP_KERNEL); ++ buf = kmalloc(mtd->erasesize, GFP_KERNEL); ++ sb = (struct squashfs_super_block *) buf; ++ for (i = j = 0; i < num_parts; i++, j++) { ++ part = &mtd_parts[j]; ++ memcpy(part, &spidata->parsed_parts[i], sizeof(struct mtd_partition)); ++ ++ if (!strcmp(part->name, ROOTFS_NAME)) { ++ /* create the root device */ ++ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i); ++ ++ part->size -= mtd->erasesize; ++ config_start = part->offset + part->size; ++ ++ while ((mtd->read(mtd, part->offset, mtd->erasesize, &len, buf) == 0) && ++ (len == mtd->erasesize) && ++ (*((u32 *) buf) == SQUASHFS_MAGIC) && ++ (sb->bytes_used > 0)) { ++ ++ /* this is squashfs, allocate another partition starting from the end of filesystem data */ ++ memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition)); ++ ++ len = (u32) sb->bytes_used; ++ len += (part->offset & 0x000fffff); ++ len += (mtd->erasesize - 1); ++ len &= ~(mtd->erasesize - 1); ++ len -= (part->offset & 0x000fffff); ++ ++ if (len + mtd->erasesize > part->size) ++ break; ++ ++ part = &mtd_parts[++j]; ++ ++ part->offset += len; ++ part->size -= len; ++ ++ part->name = kmalloc(10, GFP_KERNEL); ++ sprintf(part->name, "rootfs%d", j - i); ++ } ++ } ++ if (!strcmp(part->name, "RedBoot config")) { ++ /* add anoterh partition for the board config data */ ++ memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition)); ++ j++; ++ part = &mtd_parts[j]; ++ part->offset += part->size; ++ part->size = mtd->erasesize; ++ ++ part->name = kmalloc(16, GFP_KERNEL); ++ sprintf(part->name, "board_config"); ++ } ++ } ++ num_parts += j - i; ++ kfree(buf); ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "Found %d redboot partitions\n", num_parts); ++#endif ++ if (num_parts) { ++ result = add_mtd_partitions(mtd, mtd_parts, num_parts); ++ } else { ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "Did not find any redboot partitions\n"); ++#endif ++ kfree(mtd); ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ ++ spidata->mtd = mtd; ++ ++ return (result); ++} ++ ++void __exit ++spiflash_exit (void) ++{ ++ if (spidata && spidata->parsed_parts) { ++ del_mtd_partitions (spidata->mtd); ++ kfree(spidata->mtd); ++ kfree(spidata); ++ } ++} ++ ++module_init (spiflash_init); ++module_exit (spiflash_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Atheros Communications Inc"); ++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); ++ +diff -urN linux.old/drivers/mtd/devices/spiflash.h linux.dev/drivers/mtd/devices/spiflash.h +--- linux.old/drivers/mtd/devices/spiflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/mtd/devices/spiflash.h 2006-12-15 06:59:43.000000000 +0100 +@@ -0,0 +1,124 @@ ++/* ++ * SPI Flash Memory support header file. ++ * ++ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $ ++ * ++ * ++ * Copyright (c) 2005, Atheros Communications Inc. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#define FLASH_1MB 1 ++#define FLASH_2MB 2 ++#define FLASH_4MB 3 ++#define FLASH_8MB 4 ++#define MAX_FLASH 5 ++ ++#define STM_PAGE_SIZE 256 ++ ++#define SPI_WRITE_ENABLE 0 ++#define SPI_WRITE_DISABLE 1 ++#define SPI_RD_STATUS 2 ++#define SPI_WR_STATUS 3 ++#define SPI_RD_DATA 4 ++#define SPI_FAST_RD_DATA 5 ++#define SPI_PAGE_PROGRAM 6 ++#define SPI_SECTOR_ERASE 7 ++#define SPI_BULK_ERASE 8 ++#define SPI_DEEP_PWRDOWN 9 ++#define SPI_RD_SIG 10 ++#define SPI_MAX_OPCODES 11 ++ ++#define SFI_WRITE_BUFFER_SIZE 4 ++#define SFI_FLASH_ADDR_MASK 0x00ffffff ++ ++#define STM_8MBIT_SIGNATURE 0x13 ++#define STM_M25P80_BYTE_COUNT 1048576 ++#define STM_M25P80_SECTOR_COUNT 16 ++#define STM_M25P80_SECTOR_SIZE 0x10000 ++ ++#define STM_16MBIT_SIGNATURE 0x14 ++#define STM_M25P16_BYTE_COUNT 2097152 ++#define STM_M25P16_SECTOR_COUNT 32 ++#define STM_M25P16_SECTOR_SIZE 0x10000 ++ ++#define STM_32MBIT_SIGNATURE 0x15 ++#define STM_M25P32_BYTE_COUNT 4194304 ++#define STM_M25P32_SECTOR_COUNT 64 ++#define STM_M25P32_SECTOR_SIZE 0x10000 ++ ++#define STM_64MBIT_SIGNATURE 0x16 ++#define STM_M25P64_BYTE_COUNT 8388608 ++#define STM_M25P64_SECTOR_COUNT 128 ++#define STM_M25P64_SECTOR_SIZE 0x10000 ++ ++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT ++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT ++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE ++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT ++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT ++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE ++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT ++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT ++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE ++#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT ++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT ++#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE ++ ++/* ++ * ST Microelectronics Opcodes for Serial Flash ++ */ ++ ++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ ++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ ++#define STM_OP_RD_STATUS 0x05 /* Read Status */ ++#define STM_OP_WR_STATUS 0x01 /* Write Status */ ++#define STM_OP_RD_DATA 0x03 /* Read Data */ ++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ ++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ ++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ ++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ ++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ ++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ ++ ++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ ++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ ++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ ++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ ++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ ++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ ++ ++/* ++ * SPI Flash Interface Registers ++ */ ++#define AR531XPLUS_SPI_READ 0x08000000 ++#define AR531XPLUS_SPI_MMR 0x11300000 ++#define AR531XPLUS_SPI_MMR_SIZE 12 ++ ++#define AR531XPLUS_SPI_CTL 0x00 ++#define AR531XPLUS_SPI_OPCODE 0x04 ++#define AR531XPLUS_SPI_DATA 0x08 ++ ++#define SPI_FLASH_READ AR531XPLUS_SPI_READ ++#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR ++#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE ++#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL ++#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE ++#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA ++ ++#define SPI_CTL_START 0x00000100 ++#define SPI_CTL_BUSY 0x00010000 ++#define SPI_CTL_TXCNT_MASK 0x0000000f ++#define SPI_CTL_RXCNT_MASK 0x000000f0 ++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff ++#define SPI_CTL_SIZE_MASK 0x00060000 ++ ++#define SPI_CTL_CLK_SEL_MASK 0x03000000 ++#define SPI_OPCODE_MASK 0x000000ff ++ ++#define SPI_STATUS_WIP STM_STATUS_WIP + |