diff options
Diffstat (limited to 'target/linux/ar71xx/files-3.2/arch/mips')
65 files changed, 0 insertions, 9472 deletions
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c deleted file mode 100644 index 1b0825486..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Atheros AP9X reference board PCI initialization - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/ath9k_platform.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/pci.h> - -#include "dev-ap9x-pci.h" -#include "pci-ath9k-fixup.h" -#include "pci.h" - -static struct ath9k_platform_data ap9x_wmac0_data = { - .led_pin = -1, -}; -static struct ath9k_platform_data ap9x_wmac1_data = { - .led_pin = -1, -}; -static char ap9x_wmac0_mac[6]; -static char ap9x_wmac1_mac[6]; - -__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) -{ - switch (wmac) { - case 0: - ap9x_wmac0_data.led_pin = pin; - break; - case 1: - ap9x_wmac1_data.led_pin = pin; - break; - } -} - -__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) -{ - switch (wmac) { - case 0: - ap9x_wmac0_data.gpio_mask = mask; - ap9x_wmac0_data.gpio_val = val; - break; - case 1: - ap9x_wmac1_data.gpio_mask = mask; - ap9x_wmac1_data.gpio_val = val; - break; - } -} - -__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds, - int num_leds) -{ - switch (wmac) { - case 0: - ap9x_wmac0_data.leds = leds; - ap9x_wmac0_data.num_leds = num_leds; - break; - case 1: - ap9x_wmac1_data.leds = leds; - ap9x_wmac1_data.num_leds = num_leds; - break; - } -} - -static int ap91_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 0: - dev->dev.platform_data = &ap9x_wmac0_data; - break; - } - - return 0; -} - -__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr) -{ - if (cal_data) - memcpy(ap9x_wmac0_data.eeprom_data, cal_data, - sizeof(ap9x_wmac0_data.eeprom_data)); - - if (mac_addr) { - memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac)); - ap9x_wmac0_data.macaddr = ap9x_wmac0_mac; - } - - ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init); - ath79_register_pci(); - - pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data); -} - -static int ap94_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 17: - dev->dev.platform_data = &ap9x_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &ap9x_wmac1_data; - break; - } - - return 0; -} - -__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ - if (cal_data0) - memcpy(ap9x_wmac0_data.eeprom_data, cal_data0, - sizeof(ap9x_wmac0_data.eeprom_data)); - - if (cal_data1) - memcpy(ap9x_wmac1_data.eeprom_data, cal_data1, - sizeof(ap9x_wmac1_data.eeprom_data)); - - if (mac_addr0) { - memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac)); - ap9x_wmac0_data.macaddr = ap9x_wmac0_mac; - } - - if (mac_addr1) { - memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac)); - ap9x_wmac1_data.macaddr = ap9x_wmac1_mac; - } - - ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init); - ath79_register_pci(); - - pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data); - pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data); -} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h deleted file mode 100644 index c7f1bb9ec..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Atheros AP9X reference board PCI initialization - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_AP9X_PCI_H -#define _ATH79_DEV_AP9X_PCI_H - -struct gpio_led; - -#if defined(CONFIG_ATH79_DEV_AP9X_PCI) -void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin); -void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val); -void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds, - int num_leds); - -void ap91_pci_init(u8 *cal_data, u8 *mac_addr); -void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1); - -#else -static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {} -static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac, - u32 mask, u32 val) {} -static inline void ap9x_pci_setup_wmac_leds(unsigned wmac, - struct gpio_led *leds, - int num_leds) {} - -static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {} -static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) {} -#endif - -#endif /* _ATH79_DEV_AP9X_PCI_H */ - diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c deleted file mode 100644 index 176414738..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Atheros AR71xx DSA switch device support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-dsa.h" - -static struct platform_device ar71xx_dsa_switch_device = { - .name = "dsa", - .id = 0, -}; - -void __init ath79_register_dsa(struct device *netdev, - struct device *miidev, - struct dsa_platform_data *d) -{ - int i; - - d->netdev = netdev; - for (i = 0; i < d->nr_chips; i++) - d->chip[i].mii_bus = miidev; - - ar71xx_dsa_switch_device.dev.platform_data = d; - platform_device_register(&ar71xx_dsa_switch_device); -} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h deleted file mode 100644 index 3730202e8..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Atheros AR71xx DSA switch device support - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_DSA_H -#define _ATH79_DEV_DSA_H - -#include <net/dsa.h> - -void ath79_register_dsa(struct device *netdev, - struct device *miidev, - struct dsa_platform_data *d); - -#endif /* _ATH79_DEV_DSA_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c deleted file mode 100644 index 27c8a40b6..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c +++ /dev/null @@ -1,971 +0,0 @@ -/* - * Atheros AR71xx SoC platform devices - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros 2.6.15 BSP - * Parts of this file are based on Atheros 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/irq.h> - -#include "common.h" -#include "dev-eth.h" - -unsigned char ath79_mac_base[ETH_ALEN] __initdata; - -static struct resource ath79_mdio0_resources[] = { - { - .name = "mdio_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE0_BASE, - .end = AR71XX_GE0_BASE + 0x200 - 1, - } -}; - -static struct ag71xx_mdio_platform_data ath79_mdio0_data; - -struct platform_device ath79_mdio0_device = { - .name = "ag71xx-mdio", - .id = 0, - .resource = ath79_mdio0_resources, - .num_resources = ARRAY_SIZE(ath79_mdio0_resources), - .dev = { - .platform_data = &ath79_mdio0_data, - }, -}; - -static struct resource ath79_mdio1_resources[] = { - { - .name = "mdio_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE1_BASE, - .end = AR71XX_GE1_BASE + 0x200 - 1, - } -}; - -static struct ag71xx_mdio_platform_data ath79_mdio1_data; - -struct platform_device ath79_mdio1_device = { - .name = "ag71xx-mdio", - .id = 1, - .resource = ath79_mdio1_resources, - .num_resources = ARRAY_SIZE(ath79_mdio1_resources), - .dev = { - .platform_data = &ath79_mdio1_data, - }, -}; - -static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) -{ - void __iomem *base; - u32 t; - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - - t = __raw_readl(base + cfg_reg); - t &= ~(3 << shift); - t |= (2 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - __raw_writel(pll_val, base + pll_reg); - - t |= (3 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - t &= ~(3 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", - (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); - - iounmap(base); -} - -static void __init ath79_mii_ctrl_set_if(unsigned int reg, - unsigned int mii_if) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); - - t = __raw_readl(base + reg); - t &= ~(AR71XX_MII_CTRL_IF_MASK); - t |= (mii_if & AR71XX_MII_CTRL_IF_MASK); - __raw_writel(t, base + reg); - - iounmap(base); -} - -static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed) -{ - void __iomem *base; - unsigned int mii_speed; - u32 t; - - switch (speed) { - case SPEED_10: - mii_speed = AR71XX_MII_CTRL_SPEED_10; - break; - case SPEED_100: - mii_speed = AR71XX_MII_CTRL_SPEED_100; - break; - case SPEED_1000: - mii_speed = AR71XX_MII_CTRL_SPEED_1000; - break; - default: - BUG(); - } - - base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); - - t = __raw_readl(base + reg); - t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT); - t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT; - __raw_writel(t, base + reg); - - iounmap(base); -} - -void __init ath79_register_mdio(unsigned int id, u32 phy_mask) -{ - struct platform_device *mdio_dev; - struct ag71xx_mdio_platform_data *mdio_data; - unsigned int max_id; - - if (ath79_soc == ATH79_SOC_AR9341 || - ath79_soc == ATH79_SOC_AR9342 || - ath79_soc == ATH79_SOC_AR9344) - max_id = 1; - else - max_id = 0; - - if (id > max_id) { - printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id); - return; - } - - switch (ath79_soc) { - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - mdio_dev = &ath79_mdio1_device; - mdio_data = &ath79_mdio1_data; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - if (id == 0) { - mdio_dev = &ath79_mdio0_device; - mdio_data = &ath79_mdio0_data; - } else { - mdio_dev = &ath79_mdio1_device; - mdio_data = &ath79_mdio1_data; - } - break; - - case ATH79_SOC_AR7242: - ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, - AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000, - AR71XX_ETH0_PLL_SHIFT); - /* fall through */ - default: - mdio_dev = &ath79_mdio0_device; - mdio_data = &ath79_mdio0_data; - break; - } - - mdio_data->phy_mask = phy_mask; - - switch (ath79_soc) { - case ATH79_SOC_AR7240: - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - mdio_data->is_ar7240 = 1; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - if (id == 1) - mdio_data->is_ar7240 = 1; - break; - - default: - break; - } - - platform_device_register(mdio_dev); -} - -struct ath79_eth_pll_data ath79_eth0_pll_data; -struct ath79_eth_pll_data ath79_eth1_pll_data; - -static u32 ath79_get_eth_pll(unsigned int mac, int speed) -{ - struct ath79_eth_pll_data *pll_data; - u32 pll_val; - - switch (mac) { - case 0: - pll_data = &ath79_eth0_pll_data; - break; - case 1: - pll_data = &ath79_eth1_pll_data; - break; - default: - BUG(); - } - - switch (speed) { - case SPEED_10: - pll_val = pll_data->pll_10; - break; - case SPEED_100: - pll_val = pll_data->pll_100; - break; - case SPEED_1000: - pll_val = pll_data->pll_1000; - break; - default: - BUG(); - } - - return pll_val; -} - -static void ath79_set_speed_ge0(int speed) -{ - u32 val = ath79_get_eth_pll(0, speed); - - ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK, - val, AR71XX_ETH0_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed); -} - -static void ath79_set_speed_ge1(int speed) -{ - u32 val = ath79_get_eth_pll(1, speed); - - ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK, - val, AR71XX_ETH1_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed); -} - -static void ar724x_set_speed_ge0(int speed) -{ - /* TODO */ -} - -static void ar724x_set_speed_ge1(int speed) -{ - /* TODO */ -} - -static void ar7242_set_speed_ge0(int speed) -{ - u32 val = ath79_get_eth_pll(0, speed); - void __iomem *base; - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK); - iounmap(base); -} - -static void ar91xx_set_speed_ge0(int speed) -{ - u32 val = ath79_get_eth_pll(0, speed); - - ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK, - val, AR913X_ETH0_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed); -} - -static void ar91xx_set_speed_ge1(int speed) -{ - u32 val = ath79_get_eth_pll(1, speed); - - ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK, - val, AR913X_ETH1_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed); -} - -static void ar933x_set_speed_ge0(int speed) -{ - /* TODO */ -} - -static void ar933x_set_speed_ge1(int speed) -{ - /* TODO */ -} - -static void ar934x_set_speed_ge0(int speed) -{ - /* TODO */ -} - -static void ar934x_set_speed_ge1(int speed) -{ - /* TODO */ -} - -static void ath79_ddr_flush_ge0(void) -{ - ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0); -} - -static void ath79_ddr_flush_ge1(void) -{ - ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1); -} - -static void ar724x_ddr_flush_ge0(void) -{ - ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0); -} - -static void ar724x_ddr_flush_ge1(void) -{ - ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1); -} - -static void ar91xx_ddr_flush_ge0(void) -{ - ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0); -} - -static void ar91xx_ddr_flush_ge1(void) -{ - ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1); -} - -static void ar933x_ddr_flush_ge0(void) -{ - ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0); -} - -static void ar933x_ddr_flush_ge1(void) -{ - ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1); -} - -static void ar934x_ddr_flush_ge0(void) -{ - ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE0); -} - -static void ar934x_ddr_flush_ge1(void) -{ - ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE1); -} - -static struct resource ath79_eth0_resources[] = { - { - .name = "mac_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE0_BASE, - .end = AR71XX_GE0_BASE + 0x200 - 1, - }, { - .name = "mac_irq", - .flags = IORESOURCE_IRQ, - .start = ATH79_CPU_IRQ_GE0, - .end = ATH79_CPU_IRQ_GE0, - }, -}; - -struct ag71xx_platform_data ath79_eth0_data = { - .reset_bit = AR71XX_RESET_GE0_MAC, -}; - -struct platform_device ath79_eth0_device = { - .name = "ag71xx", - .id = 0, - .resource = ath79_eth0_resources, - .num_resources = ARRAY_SIZE(ath79_eth0_resources), - .dev = { - .platform_data = &ath79_eth0_data, - }, -}; - -static struct resource ath79_eth1_resources[] = { - { - .name = "mac_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE1_BASE, - .end = AR71XX_GE1_BASE + 0x200 - 1, - }, { - .name = "mac_irq", - .flags = IORESOURCE_IRQ, - .start = ATH79_CPU_IRQ_GE1, - .end = ATH79_CPU_IRQ_GE1, - }, -}; - -struct ag71xx_platform_data ath79_eth1_data = { - .reset_bit = AR71XX_RESET_GE1_MAC, -}; - -struct platform_device ath79_eth1_device = { - .name = "ag71xx", - .id = 1, - .resource = ath79_eth1_resources, - .num_resources = ARRAY_SIZE(ath79_eth1_resources), - .dev = { - .platform_data = &ath79_eth1_data, - }, -}; - -struct ag71xx_switch_platform_data ath79_switch_data; - -#define AR71XX_PLL_VAL_1000 0x00110000 -#define AR71XX_PLL_VAL_100 0x00001099 -#define AR71XX_PLL_VAL_10 0x00991099 - -#define AR724X_PLL_VAL_1000 0x00110000 -#define AR724X_PLL_VAL_100 0x00001099 -#define AR724X_PLL_VAL_10 0x00991099 - -#define AR7242_PLL_VAL_1000 0x16000000 -#define AR7242_PLL_VAL_100 0x00000101 -#define AR7242_PLL_VAL_10 0x00001616 - -#define AR913X_PLL_VAL_1000 0x1a000000 -#define AR913X_PLL_VAL_100 0x13000a44 -#define AR913X_PLL_VAL_10 0x00441099 - -#define AR933X_PLL_VAL_1000 0x00110000 -#define AR933X_PLL_VAL_100 0x00001099 -#define AR933X_PLL_VAL_10 0x00991099 - -#define AR934X_PLL_VAL_1000 0x00110000 -#define AR934X_PLL_VAL_100 0x00001099 -#define AR934X_PLL_VAL_10 0x00991099 - -static void __init ath79_init_eth_pll_data(unsigned int id) -{ - struct ath79_eth_pll_data *pll_data; - u32 pll_10, pll_100, pll_1000; - - switch (id) { - case 0: - pll_data = &ath79_eth0_pll_data; - break; - case 1: - pll_data = &ath79_eth1_pll_data; - break; - default: - BUG(); - } - - switch (ath79_soc) { - case ATH79_SOC_AR7130: - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - pll_10 = AR71XX_PLL_VAL_10; - pll_100 = AR71XX_PLL_VAL_100; - pll_1000 = AR71XX_PLL_VAL_1000; - break; - - case ATH79_SOC_AR7240: - case ATH79_SOC_AR7241: - pll_10 = AR724X_PLL_VAL_10; - pll_100 = AR724X_PLL_VAL_100; - pll_1000 = AR724X_PLL_VAL_1000; - break; - - case ATH79_SOC_AR7242: - pll_10 = AR7242_PLL_VAL_10; - pll_100 = AR7242_PLL_VAL_100; - pll_1000 = AR7242_PLL_VAL_1000; - break; - - case ATH79_SOC_AR9130: - case ATH79_SOC_AR9132: - pll_10 = AR913X_PLL_VAL_10; - pll_100 = AR913X_PLL_VAL_100; - pll_1000 = AR913X_PLL_VAL_1000; - break; - - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - pll_10 = AR933X_PLL_VAL_10; - pll_100 = AR933X_PLL_VAL_100; - pll_1000 = AR933X_PLL_VAL_1000; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - pll_10 = AR934X_PLL_VAL_10; - pll_100 = AR934X_PLL_VAL_100; - pll_1000 = AR934X_PLL_VAL_1000; - break; - - default: - BUG(); - } - - if (!pll_data->pll_10) - pll_data->pll_10 = pll_10; - - if (!pll_data->pll_100) - pll_data->pll_100 = pll_100; - - if (!pll_data->pll_1000) - pll_data->pll_1000 = pll_1000; -} - -static int __init ath79_setup_phy_if_mode(unsigned int id, - struct ag71xx_platform_data *pdata) -{ - unsigned int mii_if; - - switch (id) { - case 0: - switch (ath79_soc) { - case ATH79_SOC_AR7130: - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - case ATH79_SOC_AR9130: - case ATH79_SOC_AR9132: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - mii_if = AR71XX_MII0_CTRL_IF_MII; - break; - case PHY_INTERFACE_MODE_GMII: - mii_if = AR71XX_MII0_CTRL_IF_GMII; - break; - case PHY_INTERFACE_MODE_RGMII: - mii_if = AR71XX_MII0_CTRL_IF_RGMII; - break; - case PHY_INTERFACE_MODE_RMII: - mii_if = AR71XX_MII0_CTRL_IF_RMII; - break; - default: - return -EINVAL; - } - ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if); - break; - - case ATH79_SOC_AR7240: - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - pdata->phy_if_mode = PHY_INTERFACE_MODE_MII; - break; - - case ATH79_SOC_AR7242: - /* FIXME */ - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_GMII: - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RMII: - break; - default: - return -EINVAL; - } - break; - - default: - BUG(); - } - break; - case 1: - switch (ath79_soc) { - case ATH79_SOC_AR7130: - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - case ATH79_SOC_AR9130: - case ATH79_SOC_AR9132: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_RMII: - mii_if = AR71XX_MII1_CTRL_IF_RMII; - break; - case PHY_INTERFACE_MODE_RGMII: - mii_if = AR71XX_MII1_CTRL_IF_RGMII; - break; - default: - return -EINVAL; - } - ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if); - break; - - case ATH79_SOC_AR7240: - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII; - break; - - case ATH79_SOC_AR7242: - /* FIXME */ - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_GMII: - break; - default: - return -EINVAL; - } - break; - - default: - BUG(); - } - break; - } - - return 0; -} - -static int ath79_eth_instance __initdata; -void __init ath79_register_eth(unsigned int id) -{ - struct platform_device *pdev; - struct ag71xx_platform_data *pdata; - int err; - - if (id > 1) { - printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id); - return; - } - - ath79_init_eth_pll_data(id); - - if (id == 0) - pdev = &ath79_eth0_device; - else - pdev = &ath79_eth1_device; - - pdata = pdev->dev.platform_data; - - err = ath79_setup_phy_if_mode(id, pdata); - if (err) { - printk(KERN_ERR - "ar71xx: invalid PHY interface mode for GE%u\n", id); - return; - } - - switch (ath79_soc) { - case ATH79_SOC_AR7130: - if (id == 0) { - pdata->ddr_flush = ath79_ddr_flush_ge0; - pdata->set_speed = ath79_set_speed_ge0; - } else { - pdata->ddr_flush = ath79_ddr_flush_ge1; - pdata->set_speed = ath79_set_speed_ge1; - } - break; - - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - if (id == 0) { - pdata->ddr_flush = ath79_ddr_flush_ge0; - pdata->set_speed = ath79_set_speed_ge0; - } else { - pdata->ddr_flush = ath79_ddr_flush_ge1; - pdata->set_speed = ath79_set_speed_ge1; - } - pdata->has_gbit = 1; - break; - - case ATH79_SOC_AR7242: - if (id == 0) { - pdata->reset_bit |= AR724X_RESET_GE0_MDIO | - AR71XX_RESET_GE0_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge0; - pdata->set_speed = ar7242_set_speed_ge0; - } else { - pdata->reset_bit |= AR724X_RESET_GE1_MDIO | - AR71XX_RESET_GE1_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge1; - pdata->set_speed = ar724x_set_speed_ge1; - } - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - case ATH79_SOC_AR7241: - if (id == 0) - pdata->reset_bit |= AR724X_RESET_GE0_MDIO; - else - pdata->reset_bit |= AR724X_RESET_GE1_MDIO; - /* fall through */ - case ATH79_SOC_AR7240: - if (id == 0) { - pdata->reset_bit |= AR71XX_RESET_GE0_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge0; - pdata->set_speed = ar724x_set_speed_ge0; - - pdata->phy_mask = BIT(4); - } else { - pdata->reset_bit |= AR71XX_RESET_GE1_PHY; - pdata->ddr_flush = ar724x_ddr_flush_ge1; - pdata->set_speed = ar724x_set_speed_ge1; - - pdata->speed = SPEED_1000; - pdata->duplex = DUPLEX_FULL; - pdata->switch_data = &ath79_switch_data; - } - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - if (ath79_soc == ATH79_SOC_AR7240) - pdata->is_ar7240 = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - case ATH79_SOC_AR9130: - if (id == 0) { - pdata->ddr_flush = ar91xx_ddr_flush_ge0; - pdata->set_speed = ar91xx_set_speed_ge0; - } else { - pdata->ddr_flush = ar91xx_ddr_flush_ge1; - pdata->set_speed = ar91xx_set_speed_ge1; - } - pdata->is_ar91xx = 1; - break; - - case ATH79_SOC_AR9132: - if (id == 0) { - pdata->ddr_flush = ar91xx_ddr_flush_ge0; - pdata->set_speed = ar91xx_set_speed_ge0; - } else { - pdata->ddr_flush = ar91xx_ddr_flush_ge1; - pdata->set_speed = ar91xx_set_speed_ge1; - } - pdata->is_ar91xx = 1; - pdata->has_gbit = 1; - break; - - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - if (id == 0) { - pdata->reset_bit = AR933X_RESET_GE0_MAC | - AR933X_RESET_GE0_MDIO; - pdata->ddr_flush = ar933x_ddr_flush_ge0; - pdata->set_speed = ar933x_set_speed_ge0; - - pdata->phy_mask = BIT(4); - } else { - pdata->reset_bit = AR933X_RESET_GE1_MAC | - AR933X_RESET_GE1_MDIO; - pdata->ddr_flush = ar933x_ddr_flush_ge1; - pdata->set_speed = ar933x_set_speed_ge1; - - pdata->speed = SPEED_1000; - pdata->duplex = DUPLEX_FULL; - pdata->switch_data = &ath79_switch_data; - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - if (id == 0) { - pdata->reset_bit = AR934X_RESET_GE0_MAC | - AR934X_RESET_GE0_MDIO; - pdata->ddr_flush =ar934x_ddr_flush_ge0; - pdata->set_speed = ar934x_set_speed_ge0; - } else { - pdata->reset_bit = AR934X_RESET_GE1_MAC | - AR934X_RESET_GE1_MDIO; - pdata->ddr_flush = ar934x_ddr_flush_ge1; - pdata->set_speed = ar934x_set_speed_ge1; - - pdata->switch_data = &ath79_switch_data; - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - if (!pdata->fifo_cfg1) - pdata->fifo_cfg1 = 0x0010ffff; - if (!pdata->fifo_cfg2) - pdata->fifo_cfg2 = 0x015500aa; - if (!pdata->fifo_cfg3) - pdata->fifo_cfg3 = 0x01f00140; - break; - - default: - BUG(); - } - - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_GMII: - case PHY_INTERFACE_MODE_RGMII: - if (!pdata->has_gbit) { - printk(KERN_ERR "ar71xx: no gbit available on eth%d\n", - id); - return; - } - /* fallthrough */ - default: - break; - } - - if (!is_valid_ether_addr(pdata->mac_addr)) { - random_ether_addr(pdata->mac_addr); - printk(KERN_DEBUG - "ar71xx: using random MAC address for eth%d\n", - ath79_eth_instance); - } - - if (pdata->mii_bus_dev == NULL) { - switch (ath79_soc) { - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - if (id == 0) - pdata->mii_bus_dev = &ath79_mdio0_device.dev; - else - pdata->mii_bus_dev = &ath79_mdio1_device.dev; - break; - - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - pdata->mii_bus_dev = &ath79_mdio1_device.dev; - break; - - default: - pdata->mii_bus_dev = &ath79_mdio0_device.dev; - break; - } - } - - /* Reset the device */ - ath79_device_reset_set(pdata->reset_bit); - mdelay(100); - - ath79_device_reset_clear(pdata->reset_bit); - mdelay(100); - - platform_device_register(pdev); - ath79_eth_instance++; -} - -void __init ath79_set_mac_base(unsigned char *mac) -{ - memcpy(ath79_mac_base, mac, ETH_ALEN); -} - -void __init ath79_parse_mac_addr(char *mac_str) -{ - u8 tmp[ETH_ALEN]; - int t; - - t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); - - if (t != ETH_ALEN) - t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx", - &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); - - if (t == ETH_ALEN) - ath79_set_mac_base(tmp); - else - printk(KERN_DEBUG "ar71xx: failed to parse mac address " - "\"%s\"\n", mac_str); -} - -static int __init ath79_ethaddr_setup(char *str) -{ - ath79_parse_mac_addr(str); - return 1; -} -__setup("ethaddr=", ath79_ethaddr_setup); - -static int __init ath79_kmac_setup(char *str) -{ - ath79_parse_mac_addr(str); - return 1; -} -__setup("kmac=", ath79_kmac_setup); - -void __init ath79_init_mac(unsigned char *dst, const unsigned char *src, - int offset) -{ - int t; - - if (!is_valid_ether_addr(src)) { - memset(dst, '\0', ETH_ALEN); - return; - } - - t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]); - t += offset; - - dst[0] = src[0]; - dst[1] = src[1]; - dst[2] = src[2]; - dst[3] = (t >> 16) & 0xff; - dst[4] = (t >> 8) & 0xff; - dst[5] = t & 0xff; -} - -void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src) -{ - int i; - - if (!is_valid_ether_addr(src)) { - memset(dst, '\0', ETH_ALEN); - return; - } - - for (i = 0; i < ETH_ALEN; i++) - dst[i] = src[i]; - dst[0] |= 0x02; -} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h deleted file mode 100644 index 4c010ef74..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Atheros AR71xx SoC device definitions - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_ETH_H -#define _ATH79_DEV_ETH_H - -#include <asm/mach-ath79/ag71xx_platform.h> - -struct platform_device; - -extern unsigned char ath79_mac_base[] __initdata; -void ath79_parse_mac_addr(char *mac_str); -void ath79_init_mac(unsigned char *dst, const unsigned char *src, - int offset); -void ath79_init_local_mac(unsigned char *dst, const unsigned char *src); - -struct ath79_eth_pll_data { - u32 pll_10; - u32 pll_100; - u32 pll_1000; -}; - -extern struct ath79_eth_pll_data ath79_eth0_pll_data; -extern struct ath79_eth_pll_data ath79_eth1_pll_data; - -extern struct ag71xx_platform_data ath79_eth0_data; -extern struct ag71xx_platform_data ath79_eth1_data; -extern struct platform_device ath79_eth0_device; -extern struct platform_device ath79_eth1_device; -void ath79_register_eth(unsigned int id); - -extern struct ag71xx_switch_platform_data ath79_switch_data; - -extern struct platform_device ath79_mdio0_device; -extern struct platform_device ath79_mdio1_device; -void ath79_register_mdio(unsigned int id, u32 phy_mask); - -#endif /* _ATH79_DEV_ETH_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c deleted file mode 100644 index 9ac19d83a..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/concat.h> - -#include "dev-spi.h" -#include "dev-m25p80.h" - -static struct ath79_spi_controller_data ath79_spi0_cdata = -{ - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 0, -}; - -static struct ath79_spi_controller_data ath79_spi1_cdata = -{ - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 1, -}; - -static struct spi_board_info ath79_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .controller_data = &ath79_spi0_cdata, - }, - { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .controller_data = &ath79_spi1_cdata, - } -}; - -static struct ath79_spi_platform_data ath79_spi_data; - -void __init ath79_register_m25p80(struct flash_platform_data *pdata) -{ - ath79_spi_data.bus_num = 0; - ath79_spi_data.num_chipselect = 1; - ath79_spi_info[0].platform_data = pdata; - ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1); -} - -static struct flash_platform_data *multi_pdata; - -static struct mtd_info *concat_devs[2] = { NULL, NULL }; -static struct work_struct mtd_concat_work; - -static void mtd_concat_add_work(struct work_struct *work) -{ - struct mtd_info *mtd; - - mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash"); - - mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts); -} - -static void mtd_concat_add(struct mtd_info *mtd) -{ - static bool registered = false; - - if (registered) - return; - - if (!strcmp(mtd->name, "spi0.0")) - concat_devs[0] = mtd; - else if (!strcmp(mtd->name, "spi0.1")) - concat_devs[1] = mtd; - else - return; - - if (!concat_devs[0] || !concat_devs[1]) - return; - - registered = true; - INIT_WORK(&mtd_concat_work, mtd_concat_add_work); - schedule_work(&mtd_concat_work); -} - -static void mtd_concat_remove(struct mtd_info *mtd) -{ -} - -static void add_mtd_concat_notifier(void) -{ - static struct mtd_notifier not = { - .add = mtd_concat_add, - .remove = mtd_concat_remove, - }; - - register_mtd_user(¬); -} - - -void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata) -{ - multi_pdata = pdata; - add_mtd_concat_notifier(); - ath79_spi_data.bus_num = 0; - ath79_spi_data.num_chipselect = 2; - ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2); -} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h deleted file mode 100644 index 637b41a7d..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_M25P80_H -#define _ATH79_DEV_M25P80_H - -#include <linux/spi/flash.h> - -void ath79_register_m25p80(struct flash_platform_data *pdata) __init; -void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init; - -#endif /* _ATH79_DEV_M25P80_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c deleted file mode 100644 index f7315a749..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * ALFA Network AP96 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> -#include <linux/spi/spi.h> -#include <linux/spi/mmc_spi.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define ALFA_AP96_GPIO_PCIE_RESET 2 -#define ALFA_AP96_GPIO_SIM_DETECT 3 -#define ALFA_AP96_GPIO_MICROSD_CD 4 -#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5 - -#define ALFA_AP96_GPIO_BUTTON_RESET 11 - -#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_AP96_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static int alfa_ap96_mmc_get_cd(struct device *dev) -{ - return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD); -} - -static struct mmc_spi_platform_data alfa_ap96_mmc_data = { - .get_cd = alfa_ap96_mmc_get_cd, - .caps = MMC_CAP_NEEDS_POLL, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -}; - -static struct ath79_spi_controller_data ap96_spi0_cdata = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 0, -}; - -static struct ath79_spi_controller_data ap96_spi1_cdata = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 1, -}; - -static struct ath79_spi_controller_data ap96_spi2_cdata = { - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, - .cs_line = 2, -}; - -static struct spi_board_info alfa_ap96_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .controller_data = &ap96_spi0_cdata - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - .platform_data = &alfa_ap96_mmc_data, - .controller_data = &ap96_spi1_cdata - }, { - .bus_num = 0, - .chip_select = 2, - .max_speed_hz = 6250000, - .modalias = "rtc-pcf2123", - .controller_data = &ap96_spi2_cdata - }, -}; - -static struct ath79_spi_platform_data alfa_ap96_spi_data = { - .bus_num = 0, - .num_chipselect = 3, -}; - -static void __init alfa_ap96_gpio_setup(void) -{ - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD"); - gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD); - gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1); - gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1); -} - -#define ALFA_AP96_WAN_PHYMASK BIT(4) -#define ALFA_AP96_LAN_PHYMASK BIT(5) -#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK) - -static void __init alfa_ap96_init(void) -{ - alfa_ap96_gpio_setup(); - - ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK; - ath79_eth1_pll_data.pll_1000 = 0x110000; - - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK; - ath79_eth1_pll_data.pll_1000 = 0x110000; - - ath79_register_eth(1); - - ath79_register_pci(); - ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info, - ARRAY_SIZE(alfa_ap96_spi_info)); - - ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_ap96_gpio_keys), - alfa_ap96_gpio_keys); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96", - alfa_ap96_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c deleted file mode 100644 index d37e63fe1..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * ALFA Network N2/N5 board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define ALFA_NX_GPIO_LED_2 17 -#define ALFA_NX_GPIO_LED_3 16 -#define ALFA_NX_GPIO_LED_5 12 -#define ALFA_NX_GPIO_LED_6 8 -#define ALFA_NX_GPIO_LED_7 6 -#define ALFA_NX_GPIO_LED_8 7 - -#define ALFA_NX_GPIO_BTN_RESET 11 - -#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL) - -#define ALFA_NX_MAC0_OFFSET 0 -#define ALFA_NX_MAC1_OFFSET 6 -#define ALFA_NX_CALDATA_OFFSET 0x1000 - -static struct mtd_partition alfa_nx_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x600000, - }, { - .name = "kernel", - .offset = 0x650000, - .size = 0x190000, - }, { - .name = "nvram", - .offset = 0x7e0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x780000, - } -}; - -static struct flash_platform_data alfa_nx_flash_data = { - .parts = alfa_nx_partitions, - .nr_parts = ARRAY_SIZE(alfa_nx_partitions), -}; - -static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_NX_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led alfa_nx_leds_gpio[] __initdata = { - { - .name = "alfa:green:led_2", - .gpio = ALFA_NX_GPIO_LED_2, - .active_low = 1, - }, { - .name = "alfa:green:led_3", - .gpio = ALFA_NX_GPIO_LED_3, - .active_low = 1, - }, { - .name = "alfa:red:led_5", - .gpio = ALFA_NX_GPIO_LED_5, - .active_low = 1, - }, { - .name = "alfa:amber:led_6", - .gpio = ALFA_NX_GPIO_LED_6, - .active_low = 1, - }, { - .name = "alfa:green:led_7", - .gpio = ALFA_NX_GPIO_LED_7, - .active_low = 1, - }, { - .name = "alfa:green:led_8", - .gpio = ALFA_NX_GPIO_LED_8, - .active_low = 1, - } -}; - -static void __init alfa_nx_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(&alfa_nx_flash_data); - - ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio), - alfa_nx_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_nx_gpio_keys), - alfa_nx_gpio_keys); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + ALFA_NX_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, - art + ALFA_NX_MAC1_OFFSET, 0); - - /* WAN port */ - ath79_register_eth(0); - /* LAN port */ - ath79_register_eth(1); - - ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5", - alfa_nx_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c deleted file mode 100644 index fa3cefb64..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Allnet ALL0258N support - * - * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -/* found via /sys/gpio/... try and error */ -#define ALL0258N_GPIO_BTN_RESET 1 -#define ALL0258N_GPIO_LED_RSSIHIGH 13 -#define ALL0258N_GPIO_LED_RSSIMEDIUM 15 -#define ALL0258N_GPIO_LED_RSSILOW 14 - -/* defaults taken from others machs */ -#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL) - -/* showed up in the original firmware's bootlog */ -#define ALL0258N_SEC_PHYMASK BIT(3) - -/* - * from U-Boot bootargs of original firmware: - * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART) - * we use a more OpenWrt-friendly layout now: - * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART) - */ -static struct mtd_partition all0258n_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x050000, - .size = 0x0E0000, - }, { - .name = "rootfs", - .offset = 0x130000, - .size = 0x540000, - }, { - .name = "failsafe", - .offset = 0x670000, - .size = 0x180000, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x620000, - }, { - .name = "art", - .offset = 0x7F0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data all0258n_flash_data = { - .parts = all0258n_partitions, - .nr_parts = ARRAY_SIZE(all0258n_partitions), -}; - -static struct gpio_led all0258n_leds_gpio[] __initdata = { - { - .name = "all0258n:green:rssihigh", - .gpio = ALL0258N_GPIO_LED_RSSIHIGH, - .active_low = 1, - }, { - .name = "all0258n:yellow:rssimedium", - .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM, - .active_low = 1, - }, { - .name = "all0258n:red:rssilow", - .gpio = ALL0258N_GPIO_LED_RSSILOW, - .active_low = 1, - } -}; - -static struct gpio_keys_button all0258n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALL0258N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init all0258n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000); - - ath79_register_m25p80(&all0258n_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio), - all0258n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(all0258n_gpio_keys), - all0258n_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK; - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N", - all0258n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c deleted file mode 100644 index 178815cf9..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Atheros AP113 board support - * - * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/spi/flash.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "pci.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define AP113_GPIO_LED_USB 0 -#define AP113_GPIO_LED_STATUS 1 -#define AP113_GPIO_LED_ST 11 - -#define AP113_GPIO_BTN_JUMPSTART 12 - -#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL) - -static struct mtd_partition ap113_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "rootfs", - .offset = 0x010000, - .size = 0x300000, - }, - { - .name = "uImage", - .offset = 0x300000, - .size = 0x3e0000, - }, - { - .name = "NVRAM", - .offset = 0x3e0000, - .size = 0x010000, - }, - { - .name = "ART", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, -}; -#define ap113_nr_parts ARRAY_SIZE(ap113_parts) - -static struct flash_platform_data ap113_flash_data = { - .parts = ap113_parts, - .nr_parts = ap113_nr_parts, -}; - -static struct gpio_led ap113_leds_gpio[] __initdata = { - { - .name = "ap113:green:usb", - .gpio = AP113_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "ap113:green:status", - .gpio = AP113_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "ap113:green:st", - .gpio = AP113_GPIO_LED_ST, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap113_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP113_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, -}; - -static void __init ap113_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&ap113_flash_data); - - ath79_register_mdio(0, ~BIT(0)); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_eth(0); - - ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap113_gpio_keys), - ap113_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio), - ap113_leds_gpio); - - ath79_register_pci(); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113", - ap113_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c deleted file mode 100644 index 8519a9d9a..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * Atheros AP83 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> -#include <linux/spi/vsc7385.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define AP83_GPIO_LED_WLAN 6 -#define AP83_GPIO_LED_POWER 14 -#define AP83_GPIO_LED_JUMPSTART 15 -#define AP83_GPIO_BTN_JUMPSTART 12 -#define AP83_GPIO_BTN_RESET 21 - -#define AP83_050_GPIO_VSC7385_CS 1 -#define AP83_050_GPIO_VSC7385_MISO 3 -#define AP83_050_GPIO_VSC7385_MOSI 16 -#define AP83_050_GPIO_VSC7385_SCK 17 - -#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) - -static struct mtd_partition ap83_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x060000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x1a0000, - .size = 0x650000, - }, { - .name = "art", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x060000, - .size = 0x790000, - } -}; - -static struct physmap_flash_data ap83_flash_data = { - .width = 2, - .parts = ap83_flash_partitions, - .nr_parts = ARRAY_SIZE(ap83_flash_partitions), -}; - -static struct resource ap83_flash_resources[] = { - [0] = { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ap83_flash_device = { - .name = "ar91xx-flash", - .id = -1, - .resource = ap83_flash_resources, - .num_resources = ARRAY_SIZE(ap83_flash_resources), - .dev = { - .platform_data = &ap83_flash_data, - } -}; - -static struct gpio_led ap83_leds_gpio[] __initdata = { - { - .name = "ap83:green:jumpstart", - .gpio = AP83_GPIO_LED_JUMPSTART, - .active_low = 0, - }, { - .name = "ap83:green:power", - .gpio = AP83_GPIO_LED_POWER, - .active_low = 0, - }, { - .name = "ap83:green:wlan", - .gpio = AP83_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ap83_gpio_keys[] __initdata = { - { - .desc = "soft_reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP83_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "jumpstart", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP83_GPIO_BTN_JUMPSTART, - .active_low = 1, - } -}; - -static struct resource ap83_040_spi_resources[] = { - [0] = { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ap83_040_spi_device = { - .name = "ap83-spi", - .id = 0, - .resource = ap83_040_spi_resources, - .num_resources = ARRAY_SIZE(ap83_040_spi_resources), -}; - -static struct spi_gpio_platform_data ap83_050_spi_data = { - .miso = AP83_050_GPIO_VSC7385_MISO, - .mosi = AP83_050_GPIO_VSC7385_MOSI, - .sck = AP83_050_GPIO_VSC7385_SCK, - .num_chipselect = 1, -}; - -static struct platform_device ap83_050_spi_device = { - .name = "spi_gpio", - .id = 0, - .dev = { - .platform_data = &ap83_050_spi_data, - } -}; - -static void ap83_vsc7385_reset(void) -{ - ath79_device_reset_set(AR71XX_RESET_GE1_PHY); - udelay(10); - ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); - mdelay(50); -} - -static struct vsc7385_platform_data ap83_vsc7385_data = { - .reset = ap83_vsc7385_reset, - .ucode_name = "vsc7385_ucode_ap83.bin", - .mac_cfg = { - .tx_ipg = 6, - .bit2 = 0, - .clk_sel = 3, - }, -}; - -static struct spi_board_info ap83_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "spi-vsc7385", - .platform_data = &ap83_vsc7385_data, - .controller_data = (void *) AP83_050_GPIO_VSC7385_CS, - } -}; - -static void __init ap83_generic_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, 0xfffffffe); - - ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = 0x1; - - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_eth1_pll_data.pll_1000 = 0x1f000000; - - ath79_register_eth(1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio), - ap83_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap83_gpio_keys), - ap83_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(eeprom, NULL); - - platform_device_register(&ap83_flash_device); - - spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info)); -} - -static void ap83_040_flash_lock(struct platform_device *pdev) -{ - ath79_flash_acquire(); -} - -static void ap83_040_flash_unlock(struct platform_device *pdev) -{ - ath79_flash_release(); -} - -static void __init ap83_040_setup(void) -{ - ap83_flash_data.lock = ap83_040_flash_lock; - ap83_flash_data.unlock = ap83_040_flash_unlock; - ap83_generic_setup(); - platform_device_register(&ap83_040_spi_device); -} - -static void __init ap83_050_setup(void) -{ - ap83_generic_setup(); - platform_device_register(&ap83_050_spi_device); -} - -static void __init ap83_setup(void) -{ - u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244); - unsigned int board_version; - - board_version = (unsigned int)(board_id[0] - '0'); - board_version += ((unsigned int)(board_id[1] - '0')) * 10; - - switch (board_version) { - case 40: - ap83_040_setup(); - break; - case 50: - ap83_050_setup(); - break; - default: - printk(KERN_WARNING "AP83-%03u board is not yet supported\n", - board_version); - } -} - -MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c deleted file mode 100644 index 9ab36cc1c..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Atheros AP96 board support - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Atheros Communications - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define AP96_GPIO_LED_12_GREEN 0 -#define AP96_GPIO_LED_3_GREEN 1 -#define AP96_GPIO_LED_2_GREEN 2 -#define AP96_GPIO_LED_WPS_GREEN 4 -#define AP96_GPIO_LED_5_GREEN 5 -#define AP96_GPIO_LED_4_ORANGE 6 - -/* Reset button - next to the power connector */ -#define AP96_GPIO_BTN_RESET 3 -/* WPS button - next to a led on right */ -#define AP96_GPIO_BTN_WPS 8 - -#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL) - -#define AP96_WMAC0_MAC_OFFSET 0x120c -#define AP96_WMAC1_MAC_OFFSET 0x520c -#define AP96_CALDATA0_OFFSET 0x1000 -#define AP96_CALDATA1_OFFSET 0x5000 - -static struct mtd_partition ap96_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "env", - .offset = 0x030000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x040000, - .size = 0x600000, - }, { - .name = "uImage", - .offset = 0x640000, - .size = 0x1b0000, - }, { - .name = "caldata", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data ap96_flash_data = { - .parts = ap96_partitions, - .nr_parts = ARRAY_SIZE(ap96_partitions), -}; - -/* - * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12 - * below (from left to right on the board). Led 1 seems to be on whenever the - * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange; - * others are green. - * - * In addition, there is one led next to a button on the right side for WPS. - */ -static struct gpio_led ap96_leds_gpio[] __initdata = { - { - .name = "ap96:green:led2", - .gpio = AP96_GPIO_LED_2_GREEN, - .active_low = 1, - }, { - .name = "ap96:green:led3", - .gpio = AP96_GPIO_LED_3_GREEN, - .active_low = 1, - }, { - .name = "ap96:orange:led4", - .gpio = AP96_GPIO_LED_4_ORANGE, - .active_low = 1, - }, { - .name = "ap96:green:led5", - .gpio = AP96_GPIO_LED_5_GREEN, - .active_low = 1, - }, { - .name = "ap96:green:led12", - .gpio = AP96_GPIO_LED_12_GREEN, - .active_low = 1, - }, { /* next to a button on right */ - .name = "ap96:green:wps", - .gpio = AP96_GPIO_LED_WPS_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap96_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP96_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP96_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -#define AP96_WAN_PHYMASK 0x10 -#define AP96_LAN_PHYMASK 0x0f - -static void __init ap96_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, art, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK; - - ath79_eth1_pll_data.pll_1000 = 0x1f000000; - - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_m25p80(&ap96_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio), - ap96_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap96_gpio_keys), - ap96_gpio_keys); - - ap94_pci_init(art + AP96_CALDATA0_OFFSET, - art + AP96_WMAC0_MAC_OFFSET, - art + AP96_CALDATA1_OFFSET, - art + AP96_WMAC1_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c deleted file mode 100644 index 281129b78..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * AzureWave AW-NR580 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "machtypes.h" -#include "pci.h" - -#define AW_NR580_GPIO_LED_READY_RED 0 -#define AW_NR580_GPIO_LED_WLAN 1 -#define AW_NR580_GPIO_LED_READY_GREEN 2 -#define AW_NR580_GPIO_LED_WPS_GREEN 4 -#define AW_NR580_GPIO_LED_WPS_AMBER 5 - -#define AW_NR580_GPIO_BTN_WPS 3 -#define AW_NR580_GPIO_BTN_RESET 11 - -#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL) - -static struct gpio_led aw_nr580_leds_gpio[] __initdata = { - { - .name = "aw-nr580:red:ready", - .gpio = AW_NR580_GPIO_LED_READY_RED, - .active_low = 0, - }, { - .name = "aw-nr580:green:ready", - .gpio = AW_NR580_GPIO_LED_READY_GREEN, - .active_low = 0, - }, { - .name = "aw-nr580:green:wps", - .gpio = AW_NR580_GPIO_LED_WPS_GREEN, - .active_low = 0, - }, { - .name = "aw-nr580:amber:wps", - .gpio = AW_NR580_GPIO_LED_WPS_AMBER, - .active_low = 0, - }, { - .name = "aw-nr580:green:wlan", - .gpio = AW_NR580_GPIO_LED_WLAN, - .active_low = 0, - } -}; - -static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, - .gpio = AW_NR580_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, - .gpio = AW_NR580_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static const char *aw_nr580_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data aw_nr580_flash_data = { - .part_probes = aw_nr580_part_probes, -}; - -static void __init aw_nr580_setup(void) -{ - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - - ath79_register_pci(); - - ath79_register_m25p80(&aw_nr580_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), - aw_nr580_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL, - ARRAY_SIZE(aw_nr580_gpio_keys), - aw_nr580_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580", - aw_nr580_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c deleted file mode 100644 index 931a7292e..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * D-Link DIR-600 rev. A1 board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "nvram.h" - -#define DIR_600_A1_GPIO_LED_WPS 0 -#define DIR_600_A1_GPIO_LED_POWER_AMBER 1 -#define DIR_600_A1_GPIO_LED_POWER_GREEN 6 -#define DIR_600_A1_GPIO_LED_LAN1 13 -#define DIR_600_A1_GPIO_LED_LAN2 14 -#define DIR_600_A1_GPIO_LED_LAN3 15 -#define DIR_600_A1_GPIO_LED_LAN4 16 -#define DIR_600_A1_GPIO_LED_WAN_AMBER 7 -#define DIR_600_A1_GPIO_LED_WAN_GREEN 17 - -#define DIR_600_A1_GPIO_BTN_RESET 8 -#define DIR_600_A1_GPIO_BTN_WPS 12 - -#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL) - -#define DIR_600_A1_NVRAM_ADDR 0x1f030000 -#define DIR_600_A1_NVRAM_SIZE 0x10000 - -static struct mtd_partition dir_600_a1_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "nvram", - .offset = 0x030000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x040000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x120000, - .size = 0x2c0000, - }, { - .name = "mac", - .offset = 0x3e0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x040000, - .size = 0x3a0000, - } -}; - -static struct flash_platform_data dir_600_a1_flash_data = { - .parts = dir_600_a1_partitions, - .nr_parts = ARRAY_SIZE(dir_600_a1_partitions), -}; - -static struct gpio_led dir_600_a1_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN, - }, { - .name = "d-link:amber:power", - .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER, - }, { - .name = "d-link:amber:wan", - .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER, - }, { - .name = "d-link:green:wan", - .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:green:lan1", - .gpio = DIR_600_A1_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "d-link:green:lan2", - .gpio = DIR_600_A1_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "d-link:green:lan3", - .gpio = DIR_600_A1_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "d-link:green:lan4", - .gpio = DIR_600_A1_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_600_A1_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_600_A1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_600_A1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init dir_600_a1_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac_buff[6]; - u8 *mac = NULL; - - if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE, - "lan_mac=", mac_buff) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); - mac = mac_buff; - } - - ath79_register_m25p80(&dir_600_a1_flash_data); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), - dir_600_a1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_600_a1_gpio_keys), - dir_600_a1_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1", - dir_600_a1_setup); - -static void __init dir_615_e4_setup(void) -{ - dir_600_a1_setup(); - ap9x_pci_setup_wmac_led_pin(0, 1); -} - -MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4", - dir_615_e4_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c deleted file mode 100644 index b15fc6814..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * D-Link DIR-615 rev C1 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */ -#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */ -#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */ -#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */ -#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */ -#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */ -#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */ - -/* buttons may need refinement */ - -#define DIR_615C1_GPIO_BTN_WPS 12 -#define DIR_615C1_GPIO_BTN_RESET 21 - -#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL) - -#define DIR_615C1_CONFIG_ADDR 0x1f020000 -#define DIR_615C1_CONFIG_SIZE 0x10000 - -static struct mtd_partition dir_615c1_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x020000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x030000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x110000, - .size = 0x2e0000, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x030000, - .size = 0x3c0000, - } -}; - -static struct flash_platform_data dir_615c1_flash_data = { - .parts = dir_615c1_partitions, - .nr_parts = ARRAY_SIZE(dir_615c1_partitions), -}; - -static struct gpio_led dir_615c1_leds_gpio[] __initdata = { - { - .name = "d-link:orange:status", - .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_615C1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, { - .name = "d-link:green:wan", - .gpio = DIR_615C1_GPIO_LED_GREEN_WAN, - .active_low = 1, - }, { - .name = "d-link:green:wancpu", - .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU, - .active_low = 1, - }, { - .name = "d-link:green:wlan", - .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN, - .active_low = 1, - }, { - .name = "d-link:green:status", - .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS, - .active_low = 1, - }, { - .name = "d-link:orange:wan", - .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN, - .active_low = 1, - } - -}; - -static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615C1_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615C1_GPIO_BTN_WPS, - } -}; - -#define DIR_615C1_LAN_PHYMASK BIT(0) -#define DIR_615C1_WAN_PHYMASK BIT(4) -#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \ - DIR_615C1_WAN_PHYMASK)) - -static void __init dir_615c1_setup(void) -{ - const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - u8 *wlan_mac = NULL; - - if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, - "lan_mac=", mac) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - wlan_mac = mac; - } - - ath79_register_mdio(0, DIR_615C1_MDIO_MASK); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&dir_615c1_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio), - dir_615c1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_615c1_gpio_keys), - dir_615c1_gpio_keys); - - ath79_register_wmac(eeprom, wlan_mac); -} - -MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1", - dir_615c1_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c deleted file mode 100644 index ab973ebfb..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * D-Link DIR-825 rev. B1 board support - * - * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o. - * - * based on mach-wndr3700.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/delay.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define DIR825B1_GPIO_LED_BLUE_USB 0 -#define DIR825B1_GPIO_LED_ORANGE_POWER 1 -#define DIR825B1_GPIO_LED_BLUE_POWER 2 -#define DIR825B1_GPIO_LED_BLUE_WPS 4 -#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 -#define DIR825B1_GPIO_LED_BLUE_PLANET 11 - -#define DIR825B1_GPIO_BTN_RESET 3 -#define DIR825B1_GPIO_BTN_WPS 8 - -#define DIR825B1_GPIO_RTL8366_SDA 5 -#define DIR825B1_GPIO_RTL8366_SCK 7 - -#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) - -#define DIR825B1_CAL_LOCATION_0 0x1f661000 -#define DIR825B1_CAL_LOCATION_1 0x1f665000 - -#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0 -#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4 - -static struct mtd_partition dir825b1_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x610000, - }, { - .name = "caldata", - .offset = 0x660000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "unknown", - .offset = 0x670000, - .size = 0x190000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data dir825b1_flash_data = { - .parts = dir825b1_partitions, - .nr_parts = ARRAY_SIZE(dir825b1_partitions), -}; - -static struct gpio_led dir825b1_leds_gpio[] __initdata = { - { - .name = "d-link:blue:usb", - .gpio = DIR825B1_GPIO_LED_BLUE_USB, - .active_low = 1, - }, { - .name = "d-link:orange:power", - .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, - .active_low = 1, - }, { - .name = "d-link:blue:power", - .gpio = DIR825B1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR825B1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, { - .name = "d-link:orange:planet", - .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, - .active_low = 1, - }, { - .name = "d-link:blue:planet", - .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825B1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825B1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { - { .reg = 0x06, .val = 0x0108 }, -}; - -static struct rtl8366_platform_data dir825b1_rtl8366s_data = { - .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, - .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, - .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), - .initvals = dir825b1_rtl8366s_initvals, -}; - -static struct platform_device dir825b1_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &dir825b1_rtl8366s_data, - } -}; - -static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr) -{ - int ret; - u8 *src = (u8 *)KSEG1ADDR(src_addr); - - ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &dest[0], &dest[1], &dest[2], - &dest[3], &dest[4], &dest[5]); - - if (ret != ETH_ALEN) - memset(dest, 0, ETH_ALEN); -} - -static void __init dir825b1_setup(void) -{ - u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; - - dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0); - dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2); - ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x11110000; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3); - ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - ath79_eth1_pll_data.pll_1000 = 0x11110000; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&dir825b1_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), - dir825b1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir825b1_gpio_keys), - dir825b1_gpio_keys); - - ath79_register_usb(); - - platform_device_register(&dir825b1_rtl8366s_device); - - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_led_pin(1, 5); - - ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1, - (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2); -} - -MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", - dir825b1_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c deleted file mode 100644 index cbd201994..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Senao EAP7660D board support - * - * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com> - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/ath5k_platform.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/pci.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" - -#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */ -#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL) - -#define EAP7660D_GPIO_DS4 7 -#define EAP7660D_GPIO_DS5 2 -#define EAP7660D_GPIO_DS7 0 -#define EAP7660D_GPIO_DS8 4 -#define EAP7660D_GPIO_SW1 3 -#define EAP7660D_GPIO_SW3 8 -#define EAP7660D_PHYMASK BIT(20) -#define EAP7660D_BOARDCONFIG 0x1F7F0000 -#define EAP7660D_GBIC_MAC_OFFSET 0x1000 -#define EAP7660D_WMAC0_MAC_OFFSET 0x1010 -#define EAP7660D_WMAC1_MAC_OFFSET 0x1016 -#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000 -#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000 - -#ifdef CONFIG_PCI -static struct ath5k_platform_data eap7660d_wmac0_data; -static struct ath5k_platform_data eap7660d_wmac1_data; -static char eap7660d_wmac0_mac[6]; -static char eap7660d_wmac1_mac[6]; -static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; -static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; - -static int eap7660d_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 17: - dev->dev.platform_data = &eap7660d_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &eap7660d_wmac1_data; - break; - } - - return 0; -} - -void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ - if (cal_data0 && *cal_data0 == 0xa55a) { - memcpy(eap7660d_wmac0_eeprom, cal_data0, - ATH5K_PLAT_EEP_MAX_WORDS); - eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom; - } - - if (cal_data1 && *cal_data1 == 0xa55a) { - memcpy(eap7660d_wmac1_eeprom, cal_data1, - ATH5K_PLAT_EEP_MAX_WORDS); - eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom; - } - - if (mac_addr0) { - memcpy(eap7660d_wmac0_mac, mac_addr0, - sizeof(eap7660d_wmac0_mac)); - eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac; - } - - if (mac_addr1) { - memcpy(eap7660d_wmac1_mac, mac_addr1, - sizeof(eap7660d_wmac1_mac)); - eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac; - } - - ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init); - ath79_register_pci(); -} -#else -static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ -} -#endif /* CONFIG_PCI */ - -static struct gpio_led eap7660d_leds_gpio[] __initdata = { - { - .name = "eap7660d:green:ds8", - .gpio = EAP7660D_GPIO_DS8, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds5", - .gpio = EAP7660D_GPIO_DS5, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds7", - .gpio = EAP7660D_GPIO_DS7, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds4", - .gpio = EAP7660D_GPIO_DS4, - .active_low = 0, - } -}; - -static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP7660D_GPIO_SW1, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP7660D_GPIO_SW3, - .active_low = 1, - } -}; - -static const char *eap7660d_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data eap7660d_flash_data = { - .part_probes = eap7660d_part_probes, -}; - -static void __init eap7660d_setup(void) -{ - u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG); - - ath79_register_mdio(0, ~EAP7660D_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, - boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = EAP7660D_PHYMASK; - ath79_register_eth(0); - ath79_register_m25p80(&eap7660d_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio), - eap7660d_leds_gpio); - ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL, - ARRAY_SIZE(eap7660d_gpio_keys), - eap7660d_gpio_keys); - eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET, - boardconfig + EAP7660D_WMAC0_MAC_OFFSET, - boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET, - boardconfig + EAP7660D_WMAC1_MAC_OFFSET); -}; - -MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D", - eap7660d_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c deleted file mode 100644 index 45dc0f618..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * ALFA NETWORKS Hornet-UB board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define HORNET_UB_GPIO_LED_WLAN 0 -#define HORNET_UB_GPIO_LED_USB 1 -#define HORNET_UB_GPIO_LED_LAN 13 -#define HORNET_UB_GPIO_LED_WAN 17 -#define HORNET_UB_GPIO_LED_WPS 27 - -#define HORNET_UB_GPIO_BTN_RESET 11 -#define HORNET_UB_GPIO_BTN_WPS 12 - -#define HORNET_UB_GPIO_USB_POWER 26 - -#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */ -#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL) - -#define HORNET_UB_MAC0_OFFSET 0x0000 -#define HORNET_UB_MAC1_OFFSET 0x0006 -#define HORNET_UB_CALDATA_OFFSET 0x1000 - -static struct gpio_led hornet_ub_leds_gpio[] __initdata = { - { - .name = "alfa:blue:lan", - .gpio = HORNET_UB_GPIO_LED_LAN, - .active_low = 0, - }, - { - .name = "alfa:blue:usb", - .gpio = HORNET_UB_GPIO_LED_USB, - .active_low = 0, - }, - { - .name = "alfa:blue:wan", - .gpio = HORNET_UB_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "alfa:blue:wlan", - .gpio = HORNET_UB_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "alfa:blue:wps", - .gpio = HORNET_UB_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, - .gpio = HORNET_UB_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, - .gpio = HORNET_UB_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init hornet_ub_gpio_setup(void) -{ - u32 t; - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; - ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); - - gpio_request(HORNET_UB_GPIO_USB_POWER, "USB power"); - gpio_direction_output(HORNET_UB_GPIO_USB_POWER, 1); -} - -static void __init hornet_ub_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - hornet_ub_gpio_setup(); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio), - hornet_ub_leds_gpio); - ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL, - ARRAY_SIZE(hornet_ub_gpio_keys), - hornet_ub_gpio_keys); - - ath79_init_mac(ath79_eth1_data.mac_addr, - art + HORNET_UB_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth0_data.mac_addr, - art + HORNET_UB_MAC1_OFFSET, 0); - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB", - hornet_ub_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c deleted file mode 100644 index 46c12c1be..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * jjPlus JA76PF board support - */ - -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */ -#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL) - -#define JA76PF_GPIO_I2C_SCL 0 -#define JA76PF_GPIO_I2C_SDA 1 -#define JA76PF_GPIO_LED_1 5 -#define JA76PF_GPIO_LED_2 4 -#define JA76PF_GPIO_LED_3 3 -#define JA76PF_GPIO_BTN_RESET 11 - -static struct gpio_led ja76pf_leds_gpio[] __initdata = { - { - .name = "ja76pf:green:led1", - .gpio = JA76PF_GPIO_LED_1, - .active_low = 1, - }, { - .name = "ja76pf:green:led2", - .gpio = JA76PF_GPIO_LED_2, - .active_low = 1, - }, { - .name = "ja76pf:green:led3", - .gpio = JA76PF_GPIO_LED_3, - .active_low = 1, - } -}; - -static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, - .gpio = JA76PF_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = { - .sda_pin = JA76PF_GPIO_I2C_SDA, - .scl_pin = JA76PF_GPIO_I2C_SCL, -}; - -static struct platform_device ja76pf_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &ja76pf_i2c_gpio_data, - } -}; - -static const char *ja76pf_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data ja76pf_flash_data = { - .part_probes = ja76pf_part_probes, -}; - -#define JA76PF_WAN_PHYMASK (1 << 4) -#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3)) -#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK) - -static void __init ja76pf_init(void) -{ - ath79_register_m25p80(&ja76pf_flash_data); - - ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - platform_device_register(&ja76pf_i2c_gpio_device); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio), - ja76pf_leds_gpio); - - ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ja76pf_gpio_keys), - ja76pf_gpio_keys); - - ath79_register_usb(); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c deleted file mode 100644 index a3c93ccd9..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * jjPlus JWAP003 board support - * - */ - -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */ -#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL) - -#define JWAP003_GPIO_WPS 11 -#define JWAP003_GPIO_I2C_SCL 0 -#define JWAP003_GPIO_I2C_SDA 1 - -static struct gpio_keys_button jwap003_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL, - .gpio = JWAP003_GPIO_WPS, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = { - .sda_pin = JWAP003_GPIO_I2C_SDA, - .scl_pin = JWAP003_GPIO_I2C_SCL, -}; - -static struct platform_device jwap003_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &jwap003_i2c_gpio_data, - } -}; - -static const char *jwap003_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data jwap003_flash_data = { - .part_probes = jwap003_part_probes, -}; - -#define JWAP003_WAN_PHYMASK BIT(0) -#define JWAP003_LAN_PHYMASK BIT(4) - -static void __init jwap003_init(void) -{ - ath79_register_m25p80(&jwap003_flash_data); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK; - ath79_eth1_data.speed = SPEED_100; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - platform_device_register(&jwap003_i2c_gpio_device); - - ath79_register_usb(); - - ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL, - ARRAY_SIZE(jwap003_gpio_keys), - jwap003_gpio_keys); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c deleted file mode 100644 index c2460ce33..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Planex MZK-W04NU board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MZK_W04NU_GPIO_LED_USB 0 -#define MZK_W04NU_GPIO_LED_STATUS 1 -#define MZK_W04NU_GPIO_LED_WPS 3 -#define MZK_W04NU_GPIO_LED_WLAN 6 -#define MZK_W04NU_GPIO_LED_AP 15 -#define MZK_W04NU_GPIO_LED_ROUTER 16 - -#define MZK_W04NU_GPIO_BTN_APROUTER 5 -#define MZK_W04NU_GPIO_BTN_WPS 12 -#define MZK_W04NU_GPIO_BTN_RESET 21 - -#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL) - -static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = { - { - .name = "planex:green:status", - .gpio = MZK_W04NU_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "planex:blue:wps", - .gpio = MZK_W04NU_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "planex:green:wlan", - .gpio = MZK_W04NU_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "planex:green:usb", - .gpio = MZK_W04NU_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "planex:green:ap", - .gpio = MZK_W04NU_GPIO_LED_AP, - .active_low = 1, - }, { - .name = "planex:green:router", - .gpio = MZK_W04NU_GPIO_LED_ROUTER, - .active_low = 1, - } -}; - -static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "aprouter", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_APROUTER, - .active_low = 0, - } -}; - -#define MZK_W04NU_WAN_PHYMASK BIT(4) -#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) - -static void __init mzk_w04nu_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, MZK_W04NU_MDIO_MASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio), - mzk_w04nu_leds_gpio); - - ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mzk_w04nu_gpio_keys), - mzk_w04nu_gpio_keys); - ath79_register_usb(); - - ath79_register_wmac(eeprom, NULL); -} - -MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU", - mzk_w04nu_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c deleted file mode 100644 index 8c4036528..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Planex MZK-W300NH board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MZK_W300NH_GPIO_LED_STATUS 1 -#define MZK_W300NH_GPIO_LED_WPS 3 -#define MZK_W300NH_GPIO_LED_WLAN 6 -#define MZK_W300NH_GPIO_LED_AP_GREEN 15 -#define MZK_W300NH_GPIO_LED_AP_AMBER 16 - -#define MZK_W300NH_GPIO_BTN_APROUTER 5 -#define MZK_W300NH_GPIO_BTN_WPS 12 -#define MZK_W300NH_GPIO_BTN_RESET 21 - -#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL) - -static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = { - { - .name = "planex:green:status", - .gpio = MZK_W300NH_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "planex:blue:wps", - .gpio = MZK_W300NH_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "planex:green:wlan", - .gpio = MZK_W300NH_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "planex:green:aprouter", - .gpio = MZK_W300NH_GPIO_LED_AP_GREEN, - }, { - .name = "planex:amber:aprouter", - .gpio = MZK_W300NH_GPIO_LED_AP_AMBER, - } -}; - -static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "aprouter", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_APROUTER, - .active_low = 0, - } -}; - -#define MZK_W300NH_WAN_PHYMASK BIT(4) -#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) - -static void __init mzk_w300nh_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, MZK_W300NH_MDIO_MASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio), - mzk_w300nh_leds_gpio); - - ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mzk_w300nh_gpio_keys), - mzk_w300nh_gpio_keys); - ath79_register_wmac(eeprom, NULL); -} - -MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH", - mzk_w300nh_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c deleted file mode 100644 index 8aa7331d4..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Zyxel NBG 460N/550N/550NH board support - * - * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com> - * - * based on mach-tl-wr1043nd.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -/* LEDs */ -#define NBG460N_GPIO_LED_WPS 3 -#define NBG460N_GPIO_LED_WAN 6 -#define NBG460N_GPIO_LED_POWER 14 -#define NBG460N_GPIO_LED_WLAN 15 - -/* Buttons */ -#define NBG460N_GPIO_BTN_WPS 12 -#define NBG460N_GPIO_BTN_RESET 21 - -#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL) - -/* RTC chip PCF8563 I2C interface */ -#define NBG460N_GPIO_PCF8563_SDA 8 -#define NBG460N_GPIO_PCF8563_SCK 7 - -/* Switch configuration I2C interface */ -#define NBG460N_GPIO_RTL8366_SDA 16 -#define NBG460N_GPIO_RTL8366_SCK 18 - -static struct mtd_partition nbg460n_partitions[] = { - { - .name = "Bootbase", - .offset = 0, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "U-Boot Config", - .offset = 0x010000, - .size = 0x030000, - }, { - .name = "U-Boot", - .offset = 0x040000, - .size = 0x030000, - }, { - .name = "linux", - .offset = 0x070000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x150000, - .size = 0x2a0000, - }, { - .name = "CalibData", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x070000, - .size = 0x380000, - } -}; - -static struct flash_platform_data nbg460n_flash_data = { - .parts = nbg460n_partitions, - .nr_parts = ARRAY_SIZE(nbg460n_partitions), -}; - -static struct gpio_led nbg460n_leds_gpio[] __initdata = { - { - .name = "nbg460n:green:power", - .gpio = NBG460N_GPIO_LED_POWER, - .active_low = 0, - .default_trigger = "default-on", - }, { - .name = "nbg460n:green:wps", - .gpio = NBG460N_GPIO_LED_WPS, - .active_low = 0, - }, { - .name = "nbg460n:green:wlan", - .gpio = NBG460N_GPIO_LED_WLAN, - .active_low = 0, - }, { - /* Not really for controlling the LED, - when set low the LED blinks uncontrollable */ - .name = "nbg460n:green:wan", - .gpio = NBG460N_GPIO_LED_WAN, - .active_low = 0, - } -}; - -static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG460N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG460N_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = { - .sda_pin = NBG460N_GPIO_PCF8563_SDA, - .scl_pin = NBG460N_GPIO_PCF8563_SCK, - .udelay = 10, -}; - -static struct platform_device nbg460n_i2c_device = { - .name = "i2c-gpio", - .id = -1, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = &nbg460n_i2c_device_platdata, - }, -}; - -static struct i2c_board_info nbg460n_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static void __devinit nbg460n_i2c_init(void) -{ - /* The gpio interface */ - platform_device_register(&nbg460n_i2c_device); - /* I2C devices */ - i2c_register_board_info(0, nbg460n_i2c_devs, - ARRAY_SIZE(nbg460n_i2c_devs)); -} - - -static struct rtl8366_platform_data nbg460n_rtl8366s_data = { - .gpio_sda = NBG460N_GPIO_RTL8366_SDA, - .gpio_sck = NBG460N_GPIO_RTL8366_SCK, -}; - -static struct platform_device nbg460n_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &nbg460n_rtl8366s_data, - } -}; - -static void __init nbg460n_setup(void) -{ - /* end of bootloader sector contains mac address */ - u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8); - /* last sector contains wlan calib data */ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - /* LAN Port */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - /* WAN Port */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - /* register the switch phy */ - platform_device_register(&nbg460n_rtl8366s_device); - - /* register flash */ - ath79_register_m25p80(&nbg460n_flash_data); - - ath79_register_wmac(eeprom, mac); - - /* register RTC chip */ - nbg460n_i2c_init(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio), - nbg460n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(nbg460n_gpio_keys), - nbg460n_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", - nbg460n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c deleted file mode 100644 index 519640ac9..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * OpenMesh OM2P support - * - * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define OM2P_GPIO_LED_POWER 0 -#define OM2P_GPIO_LED_GREEN 13 -#define OM2P_GPIO_LED_RED 14 -#define OM2P_GPIO_LED_YELLOW 15 -#define OM2P_GPIO_LED_LAN 16 -#define OM2P_GPIO_LED_WAN 17 -#define OM2P_GPIO_BTN_RESET 11 - -#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL) - -#define OM2P_WAN_PHYMASK BIT(4) - -static struct flash_platform_data om2p_flash_data = { - .type = "s25sl12800", - .name = "ar7240-nor0", -}; - -static struct gpio_led om2p_leds_gpio[] __initdata = { - { - .name = "om2p:blue:power", - .gpio = OM2P_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om2p:red:wifi", - .gpio = OM2P_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om2p:yellow:wifi", - .gpio = OM2P_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om2p:green:wifi", - .gpio = OM2P_GPIO_LED_GREEN, - .active_low = 1, - }, { - .name = "om2p:blue:lan", - .gpio = OM2P_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "om2p:blue:wan", - .gpio = OM2P_GPIO_LED_WAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button om2p_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL, - .gpio = OM2P_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init om2p_setup(void) -{ - u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); - u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); - u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(&om2p_flash_data); - - ath79_register_mdio(0, ~OM2P_WAN_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ap91_pci_init(ee, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), - om2p_leds_gpio); - - ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om2p_gpio_keys), - om2p_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c deleted file mode 100644 index 3a350e90a..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Atheros PB42 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL) - -#define PB42_GPIO_BTN_SW4 8 -#define PB42_GPIO_BTN_SW5 3 - -static struct gpio_keys_button pb42_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB42_GPIO_BTN_SW4, - .active_low = 1, - }, { - .desc = "sw5", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB42_GPIO_BTN_SW5, - .active_low = 1, - } -}; - -static const char *pb42_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data pb42_flash_data = { - .part_probes = pb42_part_probes, -}; - -#define PB42_WAN_PHYMASK BIT(20) -#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) -#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK) - -static void __init pb42_init(void) -{ - ath79_register_m25p80(&pb42_flash_data); - - ath79_register_mdio(0, ~PB42_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.speed = SPEED_100; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pb42_gpio_keys), - pb42_gpio_keys); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c deleted file mode 100644 index ff01f7286..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Atheros PB92 board support - * - * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -static struct mtd_partition pb92_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x2b0000, - }, { - .name = "uImage", - .offset = 0x300000, - .size = 0x0e0000, - }, { - .name = "ART", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data pb92_flash_data = { - .parts = pb92_partitions, - .nr_parts = ARRAY_SIZE(pb92_partitions), -}; - -#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL) - -#define PB92_GPIO_BTN_SW4 8 -#define PB92_GPIO_BTN_SW5 3 - -static struct gpio_keys_button pb92_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB92_GPIO_BTN_SW4, - .active_low = 1, - }, { - .desc = "sw5", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB92_GPIO_BTN_SW5, - .active_low = 1, - } -}; - -static void __init pb92_init(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&pb92_flash_data); - - ath79_register_mdio(0, ~BIT(0)); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_eth(0); - - ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pb92_gpio_keys), - pb92_gpio_keys); - - ath79_register_usb(); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c deleted file mode 100644 index 24a4e7c3c..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c +++ /dev/null @@ -1,406 +0,0 @@ -/* - * MikroTik RouterBOARD 4xx series support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/mdio-gpio.h> -#include <linux/mmc/host.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/spi/mmc_spi.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/pci.h> -#include <asm/mach-ath79/rb4xx_cpld.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define RB4XX_GPIO_USER_LED 4 -#define RB4XX_GPIO_RESET_SWITCH 7 - -#define RB4XX_GPIO_CPLD_BASE 32 -#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1) -#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2) -#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3) -#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4) -#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5) - -#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL) - -static struct gpio_led rb4xx_leds_gpio[] __initdata = { - { - .name = "rb4xx:yellow:user", - .gpio = RB4XX_GPIO_USER_LED, - .active_low = 0, - }, { - .name = "rb4xx:green:led1", - .gpio = RB4XX_GPIO_CPLD_LED1, - .active_low = 1, - }, { - .name = "rb4xx:green:led2", - .gpio = RB4XX_GPIO_CPLD_LED2, - .active_low = 1, - }, { - .name = "rb4xx:green:led3", - .gpio = RB4XX_GPIO_CPLD_LED3, - .active_low = 1, - }, { - .name = "rb4xx:green:led4", - .gpio = RB4XX_GPIO_CPLD_LED4, - .active_low = 1, - }, { - .name = "rb4xx:green:led5", - .gpio = RB4XX_GPIO_CPLD_LED5, - .active_low = 0, - }, -}; - -static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = { - { - .desc = "reset_switch", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL, - .gpio = RB4XX_GPIO_RESET_SWITCH, - .active_low = 1, - } -}; - -static struct platform_device rb4xx_nand_device = { - .name = "rb4xx-nand", - .id = -1, -}; - -static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = { - { - .slot = 17, - .pin = 1, - .irq = ATH79_PCI_IRQ(2), - }, { - .slot = 18, - .pin = 1, - .irq = ATH79_PCI_IRQ(0), - }, { - .slot = 18, - .pin = 2, - .irq = ATH79_PCI_IRQ(1), - }, { - .slot = 19, - .pin = 1, - .irq = ATH79_PCI_IRQ(1), - }, { - .slot = 19, - .pin = 1, - .irq = ATH79_PCI_IRQ(2), - } -}; - -static struct mtd_partition rb4xx_partitions[] = { - { - .name = "routerboot", - .offset = 0, - .size = 0x0b000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "hard_config", - .offset = 0x0b000, - .size = 0x01000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "bios", - .offset = 0x0d000, - .size = 0x02000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "soft_config", - .offset = 0x0f000, - .size = 0x01000, - } -}; - -static struct flash_platform_data rb4xx_flash_data = { - .type = "pm25lv512", - .parts = rb4xx_partitions, - .nr_parts = ARRAY_SIZE(rb4xx_partitions), -}; - -static struct rb4xx_cpld_platform_data rb4xx_cpld_data = { - .gpio_base = RB4XX_GPIO_CPLD_BASE, -}; - -static struct mmc_spi_platform_data rb4xx_mmc_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -}; - -static struct spi_board_info rb4xx_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &rb4xx_flash_data, - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "spi-rb4xx-cpld", - .platform_data = &rb4xx_cpld_data, - } -}; - -static struct spi_board_info rb4xx_microsd_info[] = { - { - .bus_num = 0, - .chip_select = 2, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - .platform_data = &rb4xx_mmc_data, - } -}; - - -static struct resource rb4xx_spi_resources[] = { - { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rb4xx_spi_device = { - .name = "rb4xx-spi", - .id = -1, - .resource = rb4xx_spi_resources, - .num_resources = ARRAY_SIZE(rb4xx_spi_resources), -}; - -static void __init rb4xx_generic_setup(void) -{ - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), - rb4xx_leds_gpio); - - ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rb4xx_gpio_keys), - rb4xx_gpio_keys); - - spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); - platform_device_register(&rb4xx_spi_device); - platform_device_register(&rb4xx_nand_device); -} - -static void __init rb411_setup(void) -{ - rb4xx_generic_setup(); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - ath79_register_mdio(0, 0xfffffffc); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = 0x00000003; - - ath79_register_eth(0); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", - rb411_setup); - -static void __init rb411u_setup(void) -{ - rb411_setup(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", - rb411u_setup); - -#define RB433_LAN_PHYMASK BIT(0) -#define RB433_WAN_PHYMASK BIT(4) -#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK) - -static void __init rb433_setup(void) -{ - rb4xx_generic_setup(); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - ath79_register_mdio(0, ~RB433_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK; - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", - rb433_setup); - -static void __init rb433u_setup(void) -{ - rb433_setup(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", - rb433u_setup); - -#define RB450_LAN_PHYMASK BIT(0) -#define RB450_WAN_PHYMASK BIT(4) -#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK) - -static void __init rb450_generic_setup(int gige) -{ - rb4xx_generic_setup(); - ath79_register_mdio(0, ~RB450_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); - ath79_eth0_data.phy_if_mode = (gige) ? - PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.phy_if_mode = (gige) ? - PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK; - - ath79_register_eth(1); - ath79_register_eth(0); -} - -static void __init rb450_setup(void) -{ - rb450_generic_setup(0); -} - -MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450", - rb450_setup); - -static void __init rb450g_setup(void) -{ - rb450_generic_setup(1); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); -} - -MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", - rb450g_setup); - -static void __init rb493_setup(void) -{ - rb4xx_generic_setup(); - - ath79_register_mdio(0, 0x3fffff00); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x00000001; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", - rb493_setup); - -#define RB493G_GPIO_MDIO_MDC 7 -#define RB493G_GPIO_MDIO_DATA 8 - -#define RB493G_MDIO_PHYMASK BIT(0) - -static struct mdio_gpio_platform_data rb493g_mdio_data = { - .mdc = RB493G_GPIO_MDIO_MDC, - .mdio = RB493G_GPIO_MDIO_DATA, - - .phy_mask = ~RB493G_MDIO_PHYMASK, -}; - -static struct platform_device rb493g_mdio_device = { - .name = "mdio-gpio", - .id = -1, - .dev = { - .platform_data = &rb493g_mdio_data, - }, -}; - -static void __init rb493g_setup(void) -{ - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), - rb4xx_leds_gpio); - - spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); - platform_device_register(&rb4xx_spi_device); - platform_device_register(&rb4xx_nand_device); - - ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev; - ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - platform_device_register(&rb493g_mdio_device); - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_usb(); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G", - rb493g_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c deleted file mode 100644 index 976617bb3..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * MikroTik RouterBOARD 750 support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/export.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/mach-rb750.h> - -#include "common.h" -#include "dev-eth.h" -#include "machtypes.h" - -static struct rb750_led_data rb750_leds[] = { - { - .name = "rb750:green:act", - .mask = RB750_LED_ACT, - .active_low = 1, - }, { - .name = "rb750:green:port1", - .mask = RB750_LED_PORT5, - .active_low = 1, - }, { - .name = "rb750:green:port2", - .mask = RB750_LED_PORT4, - .active_low = 1, - }, { - .name = "rb750:green:port3", - .mask = RB750_LED_PORT3, - .active_low = 1, - }, { - .name = "rb750:green:port4", - .mask = RB750_LED_PORT2, - .active_low = 1, - }, { - .name = "rb750:green:port5", - .mask = RB750_LED_PORT1, - .active_low = 1, - } -}; - -static struct rb750_led_platform_data rb750_leds_data = { - .num_leds = ARRAY_SIZE(rb750_leds), - .leds = rb750_leds, -}; - -static struct platform_device rb750_leds_device = { - .name = "leds-rb750", - .dev = { - .platform_data = &rb750_leds_data, - } -}; - -static struct platform_device rb750_nand_device = { - .name = "rb750-nand", - .id = -1, -}; - -int rb750_latch_change(u32 mask_clr, u32 mask_set) -{ - static DEFINE_SPINLOCK(lock); - static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE; - static u32 latch_oe; - static u32 latch_clr; - unsigned long flags; - u32 t; - int ret = 0; - - spin_lock_irqsave(&lock, flags); - - if ((mask_clr & BIT(31)) != 0 && - (latch_set & RB750_LVC573_LE) == 0) { - goto unlock; - } - - latch_set = (latch_set | mask_set) & ~mask_clr; - latch_clr = (latch_clr | mask_clr) & ~mask_set; - - if (latch_oe == 0) - latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE); - - if (likely(latch_set & RB750_LVC573_LE)) { - void __iomem *base = ath79_gpio_base; - - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - t |= mask_clr | latch_oe | mask_set; - - __raw_writel(t, base + AR71XX_GPIO_REG_OE); - __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR); - __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET); - } else if (mask_clr & RB750_LVC573_LE) { - void __iomem *base = ath79_gpio_base; - - latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_CLEAR); - } - - ret = 1; - -unlock: - spin_unlock_irqrestore(&lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(rb750_latch_change); - -void rb750_nand_pins_enable(void) -{ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_SPI_EN); -} -EXPORT_SYMBOL_GPL(rb750_nand_pins_enable); - -void rb750_nand_pins_disable(void) -{ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN, - AR724X_GPIO_FUNC_JTAG_DISABLE); -} -EXPORT_SYMBOL_GPL(rb750_nand_pins_disable); - -static void __init rb750_setup(void) -{ - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - platform_device_register(&rb750_leds_device); - platform_device_register(&rb750_nand_device); -} - -MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750", - rb750_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c deleted file mode 100644 index 28d9de4f3..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Redwave RW2458N support - * - * Copyright (C) 2011-2012 Cezary Jackiewicz <cezary@eko.one.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define RW2458N_GPIO_LED_D3 1 -#define RW2458N_GPIO_LED_D4 0 -#define RW2458N_GPIO_LED_D5 11 -#define RW2458N_GPIO_LED_D6 7 -#define RW2458N_GPIO_BTN_RESET 12 - -#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL, - .gpio = RW2458N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -#define RW2458N_WAN_PHYMASK BIT(4) - -static struct gpio_led rw2458n_leds_gpio[] __initdata = { - { - .name = "rw2458n:green:d3", - .gpio = RW2458N_GPIO_LED_D3, - .active_low = 1, - }, { - .name = "rw2458n:green:d4", - .gpio = RW2458N_GPIO_LED_D4, - .active_low = 1, - }, { - .name = "rw2458n:green:d5", - .gpio = RW2458N_GPIO_LED_D5, - .active_low = 1, - }, { - .name = "rw2458n:green:d6", - .gpio = RW2458N_GPIO_LED_D6, - .active_low = 1, - } -}; - -static const char *rw2458n_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data rw2458n_flash_data = { - .part_probes = rw2458n_part_probes, -}; - -static void __init rw2458n_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&rw2458n_flash_data); - - ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ap91_pci_init(ee, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio), - rw2458n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rw2458n_gpio_keys), - rw2458n_gpio_keys); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N", - rw2458n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c deleted file mode 100644 index de2d2a537..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * TrendNET TEW-632BRP board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define TEW_632BRP_GPIO_LED_STATUS 1 -#define TEW_632BRP_GPIO_LED_WPS 3 -#define TEW_632BRP_GPIO_LED_WLAN 6 -#define TEW_632BRP_GPIO_BTN_WPS 12 -#define TEW_632BRP_GPIO_BTN_RESET 21 - -#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL) - -#define TEW_632BRP_CONFIG_ADDR 0x1f020000 -#define TEW_632BRP_CONFIG_SIZE 0x10000 - -static struct mtd_partition tew_632brp_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x020000, - .size = 0x010000, - }, { - .name = "kernel", - .offset = 0x030000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x110000, - .size = 0x2e0000, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x030000, - .size = 0x3c0000, - } -}; - -static struct flash_platform_data tew_632brp_flash_data = { - .parts = tew_632brp_partitions, - .nr_parts = ARRAY_SIZE(tew_632brp_partitions), -}; - -static struct gpio_led tew_632brp_leds_gpio[] __initdata = { - { - .name = "tew-632brp:green:status", - .gpio = TEW_632BRP_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "tew-632brp:blue:wps", - .gpio = TEW_632BRP_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "tew-632brp:green:wlan", - .gpio = TEW_632BRP_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_632BRP_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_632BRP_GPIO_BTN_WPS, - } -}; - -#define TEW_632BRP_LAN_PHYMASK BIT(0) -#define TEW_632BRP_WAN_PHYMASK BIT(4) -#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \ - TEW_632BRP_WAN_PHYMASK)) - -static void __init tew_632brp_setup(void) -{ - const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - u8 *wlan_mac = NULL; - - if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE, - "lan_mac=", mac) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - wlan_mac = mac; - } - - ath79_register_mdio(0, TEW_632BRP_MDIO_MASK); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&tew_632brp_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio), - tew_632brp_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_632brp_gpio_keys), - tew_632brp_gpio_keys); - - ath79_register_wmac(eeprom, wlan_mac); -} - -MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP", - tew_632brp_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-673gru.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-673gru.c deleted file mode 100644 index 71f2ec00e..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-673gru.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * TRENDnet TEW-673GRU board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/delay.h> -#include <linux/rtl8366.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define TEW673GRU_GPIO_LCD_SCK 0 -#define TEW673GRU_GPIO_LCD_MOSI 1 -#define TEW673GRU_GPIO_LCD_MISO 2 -#define TEW673GRU_GPIO_LCD_CS 6 - -#define TEW673GRU_GPIO_LED_WPS 9 - -#define TEW673GRU_GPIO_BTN_RESET 3 -#define TEW673GRU_GPIO_BTN_WPS 8 - -#define TEW673GRU_GPIO_RTL8366_SDA 5 -#define TEW673GRU_GPIO_RTL8366_SCK 7 - -#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL) - -#define TEW673GRU_CAL_LOCATION_0 0x1f661000 -#define TEW673GRU_CAL_LOCATION_1 0x1f665000 - -#define TEW673GRU_MAC_LOCATION_0 0x1f66ffa0 -#define TEW673GRU_MAC_LOCATION_1 0x1f66ffb4 - -static struct mtd_partition tew673gru_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x610000, - }, { - .name = "caldata", - .offset = 0x660000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "unknown", - .offset = 0x670000, - .size = 0x190000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data tew673gru_flash_data = { - .parts = tew673gru_partitions, - .nr_parts = ARRAY_SIZE(tew673gru_partitions), -}; - -static struct gpio_led tew673gru_leds_gpio[] __initdata = { - { - .name = "trendnet:blue:wps", - .gpio = TEW673GRU_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW673GRU_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW673GRU_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = { - { .reg = 0x06, .val = 0x0108 }, -}; - -static struct rtl8366_platform_data tew673gru_rtl8366s_data = { - .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA, - .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK, - .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals), - .initvals = tew673gru_rtl8366s_initvals, -}; - -static struct platform_device tew673gru_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tew673gru_rtl8366s_data, - } -}; - -static struct spi_board_info tew673gru_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 400000, - .modalias = "spidev", - .mode = SPI_MODE_2, - .controller_data = (void *) TEW673GRU_GPIO_LCD_CS, - }, -}; - -static struct spi_gpio_platform_data tew673gru_spi_data = { - .sck = TEW673GRU_GPIO_LCD_SCK, - .miso = TEW673GRU_GPIO_LCD_MISO, - .mosi = TEW673GRU_GPIO_LCD_MOSI, - .num_chipselect = 1, -}; - -static struct platform_device tew673gru_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &tew673gru_spi_data, - }, -}; - -static void tew673gru_read_ascii_mac(u8 *dest, unsigned int src_addr) -{ - int ret; - u8 *src = (u8 *)KSEG1ADDR(src_addr); - - ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &dest[0], &dest[1], &dest[2], - &dest[3], &dest[4], &dest[5]); - - if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN); -} - -static void __init tew673gru_setup(void) -{ - u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; - - tew673gru_read_ascii_mac(mac1, TEW673GRU_MAC_LOCATION_0); - tew673gru_read_ascii_mac(mac2, TEW673GRU_MAC_LOCATION_1); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2); - ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x11110000; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3); - ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - ath79_eth1_pll_data.pll_1000 = 0x11110000; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&tew673gru_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio), - tew673gru_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew673gru_gpio_keys), - tew673gru_gpio_keys); - - ath79_register_usb(); - - platform_device_register(&tew673gru_rtl8366s_device); - - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_led_pin(1, 5); - - ap94_pci_init((u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0), mac1, - (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_1), mac2); - - spi_register_board_info(tew673gru_spi_info, - ARRAY_SIZE(tew673gru_spi_info)); - platform_device_register(&tew673gru_spi_device); -} - -MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU", - tew673gru_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr11u.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr11u.c deleted file mode 100644 index 7846b4f18..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr11u.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * TP-LINK TL-MR11U board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_MR11U_GPIO_LED_3G 27 -#define TL_MR11U_GPIO_LED_WLAN 26 -#define TL_MR11U_GPIO_LED_LAN 17 - -#define TL_MR11U_GPIO_BTN_WPS 20 -#define TL_MR11U_GPIO_BTN_RESET 11 - -#define TL_MR11U_GPIO_USB_POWER 8 - -#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL) - -static const char *tl_mr11u_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr11u_flash_data = { - .part_probes = tl_mr11u_part_probes, -}; - -static struct gpio_led tl_mr11u_leds_gpio[] __initdata = { - { - .name = "tp-link:green:3g", - .gpio = TL_MR11U_GPIO_LED_3G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_MR11U_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:green:lan", - .gpio = TL_MR11U_GPIO_LED_LAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR11U_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR11U_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init tl_mr11u_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_mr11u_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio), - tl_mr11u_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr11u_gpio_keys), - tl_mr11u_gpio_keys); - - gpio_request(TL_MR11U_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_MR11U_GPIO_USB_POWER, 1); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U", - tl_mr11u_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c deleted file mode 100644 index 9732d5cd5..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * TP-LINK TL-MR3020 board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_MR3020_GPIO_LED_3G 27 -#define TL_MR3020_GPIO_LED_WLAN 0 -#define TL_MR3020_GPIO_LED_LAN 17 -#define TL_MR3020_GPIO_LED_WPS 26 - -#define TL_MR3020_GPIO_BTN_WPS 11 -#define TL_MR3020_GPIO_BTN_SW1 18 -#define TL_MR3020_GPIO_BTN_SW2 20 - -#define TL_MR3020_GPIO_USB_POWER 8 - -#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL) - -static const char *tl_mr3020_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr3020_flash_data = { - .part_probes = tl_mr3020_part_probes, -}; - -static struct gpio_led tl_mr3020_leds_gpio[] __initdata = { - { - .name = "tp-link:green:3g", - .gpio = TL_MR3020_GPIO_LED_3G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_MR3020_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "tp-link:green:lan", - .gpio = TL_MR3020_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "tp-link:green:wps", - .gpio = TL_MR3020_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_SW1, - .active_low = 0, - }, - { - .desc = "sw2", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_SW2, - .active_low = 0, - } -}; - -static void __init tl_mr3020_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_mr3020_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio), - tl_mr3020_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3020_gpio_keys), - tl_mr3020_gpio_keys); - - gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020", - tl_mr3020_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c deleted file mode 100644 index 35515a9b4..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * TP-LINK TL-MR3220/3420 board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define TL_MR3X20_GPIO_LED_QSS 0 -#define TL_MR3X20_GPIO_LED_SYSTEM 1 -#define TL_MR3X20_GPIO_LED_3G 8 - -#define TL_MR3X20_GPIO_BTN_RESET 11 -#define TL_MR3X20_GPIO_BTN_QSS 12 - -#define TL_MR3X20_GPIO_USB_POWER 6 - -#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL) - -static const char *tl_mr3x20_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr3x20_flash_data = { - .part_probes = tl_mr3x20_part_probes, -}; - -static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_MR3X20_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_MR3X20_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:3g", - .gpio = TL_MR3X20_GPIO_LED_3G, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3X20_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3X20_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_ap99_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_mr3x20_flash_data); - - ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3x20_gpio_keys), - tl_mr3x20_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - /* WAN port */ - ath79_register_eth(0); - - ap91_pci_init(ee, mac); -} - -static void __init tl_mr3x20_usb_setup(void) -{ - /* enable power for the USB port */ - gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1); - - ath79_register_usb(); -} - -static void __init tl_mr3220_setup(void) -{ - tl_ap99_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), - tl_mr3x20_leds_gpio); - ap9x_pci_setup_wmac_led_pin(0, 1); - tl_mr3x20_usb_setup(); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220", - tl_mr3220_setup); - -static void __init tl_mr3420_setup(void) -{ - tl_ap99_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), - tl_mr3x20_leds_gpio); - ap9x_pci_setup_wmac_led_pin(0, 0); - tl_mr3x20_usb_setup(); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", - tl_mr3420_setup); - -static void __init tl_wr841n_v7_setup(void) -{ - tl_ap99_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1, - tl_mr3x20_leds_gpio); - ap9x_pci_setup_wmac_led_pin(0, 0); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7", - "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c deleted file mode 100644 index b4fb2a9f9..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * TP-LINK TL-WA901N/ND v2 board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> - * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WA901ND_V2_GPIO_LED_QSS 4 -#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 -#define TL_WA901ND_V2_GPIO_LED_WLAN 9 - -#define TL_WA901ND_V2_GPIO_BTN_RESET 3 -#define TL_WA901ND_V2_GPIO_BTN_QSS 7 - -#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) - -static const char *tl_wa901nd_v2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa901nd_v2_flash_data = { - .part_probes = tl_wa901nd_v2_part_probes, -}; - -static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WA901ND_V2_GPIO_LED_QSS, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wa901nd_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = 0x00001000; - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC | - AR71XX_RESET_GE0_PHY; - ath79_register_eth(0); - - ath79_register_m25p80(&tl_wa901nd_v2_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), - tl_wa901nd_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), - tl_wa901nd_v2_gpio_keys); - - ath79_register_wmac(eeprom, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", - "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c deleted file mode 100644 index 2f4e0c047..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * TP-LINK TL-WA901N/ND v1 board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define TL_WA901ND_GPIO_LED_QSS 0 -#define TL_WA901ND_GPIO_LED_SYSTEM 1 -#define TL_WA901ND_GPIO_LED_LAN 13 - -#define TL_WA901ND_GPIO_BTN_RESET 11 -#define TL_WA901ND_GPIO_BTN_QSS 12 - -#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) - -static const char *tl_wa901nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa901nd_flash_data = { - .part_probes = tl_wa901nd_part_probes, -}; - -static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan", - .gpio = TL_WA901ND_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WA901ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WA901ND_GPIO_LED_QSS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wa901nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - /* - * ath79_eth0 would be the WAN port, but is not connected on - * the TL-WA901ND. ath79_eth1 connects to the internal switch chip, - * however we have a single LAN port only. - */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(1); - - ath79_register_m25p80(&tl_wa901nd_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), - tl_wa901nd_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa901nd_gpio_keys), - tl_wa901nd_gpio_keys); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", - tl_wa901nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c deleted file mode 100644 index e789b402b..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * TP-LINK TL-WR1043N/ND board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/rtl8366.h> -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR1043ND_GPIO_LED_USB 1 -#define TL_WR1043ND_GPIO_LED_SYSTEM 2 -#define TL_WR1043ND_GPIO_LED_QSS 5 -#define TL_WR1043ND_GPIO_LED_WLAN 9 - -#define TL_WR1043ND_GPIO_BTN_RESET 3 -#define TL_WR1043ND_GPIO_BTN_QSS 7 - -#define TL_WR1043ND_GPIO_RTL8366_SDA 18 -#define TL_WR1043ND_GPIO_RTL8366_SCK 19 - -#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr1043nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr1043nd_flash_data = { - .part_probes = tl_wr1043nd_part_probes, -}; - -static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:usb", - .gpio = TL_WR1043ND_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR1043ND_GPIO_LED_QSS, - .active_low = 0, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR1043ND_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = { - .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, - .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, -}; - -static struct platform_device tl_wr1043nd_rtl8366rb_device = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tl_wr1043nd_rtl8366rb_data, - } -}; - -static void __init tl_wr1043nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x1a000000; - - ath79_register_eth(0); - - ath79_register_usb(); - - ath79_register_m25p80(&tl_wr1043nd_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), - tl_wr1043nd_leds_gpio); - - platform_device_register(&tl_wr1043nd_rtl8366rb_device); - - ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr1043nd_gpio_keys), - tl_wr1043nd_gpio_keys); - - ath79_register_wmac(eeprom, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", - tl_wr1043nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c deleted file mode 100644 index bb00b72e7..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * TP-LINK TL-WR2543N/ND board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/rtl8367.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define TL_WR2543N_GPIO_LED_WPS 0 -#define TL_WR2543N_GPIO_LED_USB 8 - -#define TL_WR2543N_GPIO_BTN_RESET 11 -#define TL_WR2543N_GPIO_BTN_WPS 12 - -#define TL_WR2543N_GPIO_RTL8367_SDA 1 -#define TL_WR2543N_GPIO_RTL8367_SCK 6 - -#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL) - -static const char *tl_wr2543n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr2543n_flash_data = { - .part_probes = tl_wr2543n_part_probes, - .max_read_len = 64, -}; - -static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { - { - .name = "tp-link:green:usb", - .gpio = TL_WR2543N_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "tp-link:green:wps", - .gpio = TL_WR2543N_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR2543N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR2543N_GPIO_BTN_WPS, - } -}; - -static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = { - .mode = RTL8367_EXTIF_MODE_RGMII, - .txdelay = 1, - .rxdelay = 0, - .ability = { - .force_mode = 1, - .txpause = 1, - .rxpause = 1, - .link = 1, - .duplex = 1, - .speed = RTL8367_PORT_SPEED_1000, - }, -}; - -static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = { - .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA, - .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK, - .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg, -}; - -static struct platform_device tl_wr2543n_rtl8367_device = { - .name = RTL8367_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tl_wr2543n_rtl8367_data, - } -}; - -static void __init tl_wr2543n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr2543n_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio), - tl_wr2543n_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr2543n_gpio_keys), - tl_wr2543n_gpio_keys); - ath79_register_usb(); - ap91_pci_init(eeprom, mac); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x1a000000; - - ath79_register_eth(0); - - platform_device_register(&tl_wr2543n_rtl8367_device); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND", - tl_wr2543n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c deleted file mode 100644 index badc35af1..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * TP-LINK TL-WR703N board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR703N_GPIO_LED_SYSTEM 27 -#define TL_WR703N_GPIO_BTN_RESET 11 - -#define TL_WR703N_GPIO_USB_POWER 8 - -#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL) - -static const char *tl_wr703n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr703n_flash_data = { - .part_probes = tl_wr703n_part_probes, -}; - -static struct gpio_led tl_wr703n_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:system", - .gpio = TL_WR703N_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR703N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init tl_wr703n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr703n_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio), - tl_wr703n_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr703n_gpio_keys), - tl_wr703n_gpio_keys); - - gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1", - tl_wr703n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c deleted file mode 100644 index b8ccdfd60..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * TP-LINK TL-WR741ND v4 board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR741NDV4_GPIO_BTN_RESET 11 -#define TL_WR741NDV4_GPIO_BTN_WPS 26 - -#define TL_WR741NDV4_GPIO_LED_WLAN 0 -#define TL_WR741NDV4_GPIO_LED_QSS 1 -#define TL_WR741NDV4_GPIO_LED_WAN 13 -#define TL_WR741NDV4_GPIO_LED_LAN1 14 -#define TL_WR741NDV4_GPIO_LED_LAN2 15 -#define TL_WR741NDV4_GPIO_LED_LAN3 16 -#define TL_WR741NDV4_GPIO_LED_LAN4 17 - -#define TL_WR741NDV4_GPIO_LED_SYSTEM 27 - -#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL) - -static const char *tl_wr741ndv4_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr741ndv4_flash_data = { - .part_probes = tl_wr741ndv4_part_probes, -}; - -static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR741NDV4_GPIO_LED_LAN1, - .active_low = 0, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR741NDV4_GPIO_LED_LAN2, - .active_low = 0, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR741NDV4_GPIO_LED_LAN3, - .active_low = 0, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR741NDV4_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR741NDV4_GPIO_LED_QSS, - .active_low = 0, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR741NDV4_GPIO_LED_WAN, - .active_low = 0, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR741NDV4_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741NDV4_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WPS", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741NDV4_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init tl_wr741ndv4_gmac_setup(void) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE); - - t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG); - t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP); - __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init tl_wr741ndv4_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - tl_wr741ndv4_gmac_setup(); - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio), - tl_wr741ndv4_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr741ndv4_gpio_keys), - tl_wr741ndv4_gpio_keys); - - ath79_register_m25p80(&tl_wr741ndv4_flash_data); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4", - "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c deleted file mode 100644 index 5931654bb..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * TP-LINK TL-WR741ND board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define TL_WR741ND_GPIO_LED_QSS 0 -#define TL_WR741ND_GPIO_LED_SYSTEM 1 -#define TL_WR741ND_GPIO_LED_LAN1 13 -#define TL_WR741ND_GPIO_LED_LAN2 14 -#define TL_WR741ND_GPIO_LED_LAN3 15 -#define TL_WR741ND_GPIO_LED_LAN4 16 -#define TL_WR741ND_GPIO_LED_WAN 17 - -#define TL_WR741ND_GPIO_BTN_RESET 11 -#define TL_WR741ND_GPIO_BTN_QSS 12 - -#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr741nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr741nd_flash_data = { - .part_probes = tl_wr741nd_part_probes, -}; - -static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR741ND_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR741ND_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR741ND_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR741ND_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR741ND_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR741ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR741ND_GPIO_LED_WAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wr741nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr741nd_flash_data); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), - tl_wr741nd_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr741nd_gpio_keys), - tl_wr741nd_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - ap9x_pci_setup_wmac_led_pin(0, 1); - ap91_pci_init(ee, mac); -} -MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", - tl_wr741nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c deleted file mode 100644 index 11f853f05..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * TP-LINK TL-WR841N/ND v1 board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-dsa.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" - -#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2 -#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4 -#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5 - -#define TL_WR841ND_V1_GPIO_BTN_RESET 3 -#define TL_WR841ND_V1_GPIO_BTN_QSS 7 - -#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL) - -static struct mtd_partition tl_wr841n_v1_partitions[] = { - { - .name = "redboot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x020000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x160000, - .size = 0x280000, - }, { - .name = "config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x020000, - .size = 0x3c0000, - } -}; - -static struct flash_platform_data tl_wr841n_v1_flash_data = { - .parts = tl_wr841n_v1_partitions, - .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions), -}; - -static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:red:qss", - .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN, - } -}; - -static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841ND_V1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841ND_V1_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct dsa_chip_data tl_wr841n_v1_dsa_chip = { - .port_names[0] = "wan", - .port_names[1] = "lan1", - .port_names[2] = "lan2", - .port_names[3] = "lan3", - .port_names[4] = "lan4", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data tl_wr841n_v1_dsa_data = { - .nr_chips = 1, - .chip = &tl_wr841n_v1_dsa_chip, -}; - -static void __init tl_wr841n_v1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev, - &tl_wr841n_v1_dsa_data); - - ath79_register_m25p80(&tl_wr841n_v1_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio), - tl_wr841n_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v1_gpio_keys), - tl_wr841n_v1_gpio_keys); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1", - tl_wr841n_v1_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c deleted file mode 100644 index 1ddeec730..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * TP-LINK TL-WR941ND board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-dsa.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR941ND_GPIO_LED_SYSTEM 2 -#define TL_WR941ND_GPIO_LED_QSS_RED 4 -#define TL_WR941ND_GPIO_LED_QSS_GREEN 5 -#define TL_WR941ND_GPIO_LED_WLAN 9 - -#define TL_WR941ND_GPIO_BTN_RESET 3 -#define TL_WR941ND_GPIO_BTN_QSS 7 - -#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr941nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr941nd_flash_data = { - .part_probes = tl_wr941nd_part_probes, -}; - -static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR941ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:red:qss", - .gpio = TL_WR941ND_GPIO_LED_QSS_RED, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR941ND_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct dsa_chip_data tl_wr941nd_dsa_chip = { - .port_names[0] = "wan", - .port_names[1] = "lan1", - .port_names[2] = "lan2", - .port_names[3] = "lan3", - .port_names[4] = "lan4", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data tl_wr941nd_dsa_data = { - .nr_chips = 1, - .chip = &tl_wr941nd_dsa_chip, -}; - -static void __init tl_wr941nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev, - &tl_wr941nd_dsa_data); - - ath79_register_m25p80(&tl_wr941nd_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio), - tl_wr941nd_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr941nd_gpio_keys), - tl_wr941nd_gpio_keys); - ath79_register_wmac(eeprom, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", - tl_wr941nd_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c deleted file mode 100644 index e49ac23fd..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Ubiquiti RouterStation support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2008 Ubiquiti <support@ubnt.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define UBNT_RS_GPIO_LED_RF 2 -#define UBNT_RS_GPIO_SW4 8 - -#define UBNT_LS_SR71_GPIO_LED_D25 0 -#define UBNT_LS_SR71_GPIO_LED_D26 1 -#define UBNT_LS_SR71_GPIO_LED_D24 2 -#define UBNT_LS_SR71_GPIO_LED_D23 4 -#define UBNT_LS_SR71_GPIO_LED_D22 5 -#define UBNT_LS_SR71_GPIO_LED_D27 6 -#define UBNT_LS_SR71_GPIO_LED_D28 7 - -#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */ -#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL) - -static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { - { - .name = "ubnt:green:rf", - .gpio = UBNT_RS_GPIO_LED_RF, - .active_low = 0, - } -}; - -static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { - { - .name = "ubnt:green:d22", - .gpio = UBNT_LS_SR71_GPIO_LED_D22, - .active_low = 0, - }, { - .name = "ubnt:green:d23", - .gpio = UBNT_LS_SR71_GPIO_LED_D23, - .active_low = 0, - }, { - .name = "ubnt:green:d24", - .gpio = UBNT_LS_SR71_GPIO_LED_D24, - .active_low = 0, - }, { - .name = "ubnt:red:d25", - .gpio = UBNT_LS_SR71_GPIO_LED_D25, - .active_low = 0, - }, { - .name = "ubnt:red:d26", - .gpio = UBNT_LS_SR71_GPIO_LED_D26, - .active_low = 0, - }, { - .name = "ubnt:green:d27", - .gpio = UBNT_LS_SR71_GPIO_LED_D27, - .active_low = 0, - }, { - .name = "ubnt:green:d28", - .gpio = UBNT_LS_SR71_GPIO_LED_D28, - .active_low = 0, - } -}; - -static struct gpio_keys_button ubnt_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, - .gpio = UBNT_RS_GPIO_SW4, - .active_low = 1, - } -}; - -static const char *ubnt_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data ubnt_flash_data = { - .part_probes = ubnt_part_probes, -}; - -static void __init ubnt_generic_setup(void) -{ - ath79_register_m25p80(&ubnt_flash_data); - - ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_gpio_keys), - ubnt_gpio_keys); - ath79_register_pci(); -} - -#define UBNT_RS_WAN_PHYMASK BIT(20) -#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) - -static void __init ubnt_rs_setup(void) -{ - ubnt_generic_setup(); - - ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; - - /* - * There is Secondary MAC address duplicate problem with some - * UBNT HW batches. Do not increase Secondary MAC address by 1 - * but do workaround with 'Locally Administrated' bit. - */ - ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.speed = SPEED_100; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), - ubnt_rs_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", - ubnt_rs_setup); - -#define UBNT_RSPRO_WAN_PHYMASK BIT(4) -#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) - -static void __init ubnt_rspro_setup(void) -{ - ubnt_generic_setup(); - - ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK | - UBNT_RSPRO_LAN_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; - - /* - * There is Secondary MAC address duplicate problem with some - * UBNT HW batches. Do not increase Secondary MAC address by 1 - * but do workaround with 'Locally Administrated' bit. - */ - ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), - ubnt_rs_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", - ubnt_rspro_setup); - -static void __init ubnt_lsx_setup(void) -{ - ubnt_generic_setup(); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); - -#define UBNT_LSSR71_PHY_MASK BIT(1) - -static void __init ubnt_lssr71_setup(void) -{ - ubnt_generic_setup(); - - ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; - - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), - ubnt_ls_sr71_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", - ubnt_lssr71_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c deleted file mode 100644 index 3e3924b87..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Buffalo WHR-HP-G300N board support - * - * based on ... - * - * TP-LINK TL-WR741ND board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define WHRHPG300N_GPIO_LED_SECURITY 0 -#define WHRHPG300N_GPIO_LED_DIAG 1 -#define WHRHPG300N_GPIO_LED_ROUTER 6 - -#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7 -#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8 -#define WHRHPG300N_GPIO_BTN_RESET 11 -#define WHRHPG300N_GPIO_BTN_AOSS 12 -#define WHRHPG300N_GPIO_LED_LAN1 13 -#define WHRHPG300N_GPIO_LED_LAN2 14 -#define WHRHPG300N_GPIO_LED_LAN3 15 -#define WHRHPG300N_GPIO_LED_LAN4 16 -#define WHRHPG300N_GPIO_LED_WAN 17 - -#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL) - -#define WHRHPG300N_MAC_OFFSET 0x20c - -static struct mtd_partition whrhpg300n_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x03e000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x03e000, - .size = 0x002000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x040000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x120000, - .size = 0x2c0000, - }, { - .name = "user_property", - .offset = 0x3e0000, - .size = 0x010000, - }, { - .name = "ART", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x040000, - .size = 0x3a0000, - } -}; - -static struct flash_platform_data whrhpg300n_flash_data = { - .parts = whrhpg300n_partitions, - .nr_parts = ARRAY_SIZE(whrhpg300n_partitions), -}; - -static struct gpio_led whrhpg300n_leds_gpio[] __initdata = { - { - .name = "buffalo:orange:security", - .gpio = WHRHPG300N_GPIO_LED_SECURITY, - .active_low = 1, - }, { - .name = "buffalo:red:diag", - .gpio = WHRHPG300N_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "buffalo:green:router", - .gpio = WHRHPG300N_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "buffalo:green:wan", - .gpio = WHRHPG300N_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "buffalo:green:lan1", - .gpio = WHRHPG300N_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "buffalo:green:lan2", - .gpio = WHRHPG300N_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "buffalo:green:lan3", - .gpio = WHRHPG300N_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "buffalo:green:lan4", - .gpio = WHRHPG300N_GPIO_LED_LAN4, - .active_low = 1, - } -}; - -static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WHRHPG300N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "aoss/wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .gpio = WHRHPG300N_GPIO_BTN_AOSS, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_2, - .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_3, - .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - } -}; - -static void __init whrhpg300n_setup(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET); - - ath79_register_m25p80(&whrhpg300n_flash_data); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio), - whrhpg300n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(whrhpg300n_gpio_keys), - whrhpg300n_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - /* WAN port */ - ath79_register_eth(0); - - ap9x_pci_setup_wmac_led_pin(0, 1); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N", - whrhpg300n_setup); - -MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N", - whrhpg300n_setup); - -MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN", - whrhpg300n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c deleted file mode 100644 index fccf1c663..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Netgear WNDR3700 board support - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/delay.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WNDR3700_GPIO_LED_WPS_ORANGE 0 -#define WNDR3700_GPIO_LED_POWER_ORANGE 1 -#define WNDR3700_GPIO_LED_POWER_GREEN 2 -#define WNDR3700_GPIO_LED_WPS_GREEN 4 -#define WNDR3700_GPIO_LED_WAN_GREEN 6 - -#define WNDR3700_GPIO_BTN_WPS 3 -#define WNDR3700_GPIO_BTN_RESET 8 -#define WNDR3700_GPIO_BTN_WIFI 11 - -#define WNDR3700_GPIO_RTL8366_SDA 5 -#define WNDR3700_GPIO_RTL8366_SCK 7 - -#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL) - -#define WNDR3700_ETH0_MAC_OFFSET 0 -#define WNDR3700_ETH1_MAC_OFFSET 0x6 - -#define WNDR3700_WMAC0_MAC_OFFSET 0 -#define WNDR3700_WMAC1_MAC_OFFSET 0xc -#define WNDR3700_CALDATA0_OFFSET 0x1000 -#define WNDR3700_CALDATA1_OFFSET 0x5000 - -static struct gpio_led wndr3700_leds_gpio[] __initdata = { - { - .name = "wndr3700:green:power", - .gpio = WNDR3700_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "wndr3700:orange:power", - .gpio = WNDR3700_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, { - .name = "wndr3700:green:wps", - .gpio = WNDR3700_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, { - .name = "wndr3700:orange:wps", - .gpio = WNDR3700_GPIO_LED_WPS_ORANGE, - .active_low = 1, - }, { - .name = "wndr3700:green:wan", - .gpio = WNDR3700_GPIO_LED_WAN_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "wifi", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_WIFI, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data wndr3700_rtl8366s_data = { - .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, - .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, -}; - -static struct platform_device wndr3700_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wndr3700_rtl8366s_data, - } -}; - -static void __init wndr3700_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - /* - * The eth0 and wmac0 interfaces share the same MAC address which - * can lead to problems if operated unbridged. Set the locally - * administered bit on the eth0 MAC to make it unique. - */ - ath79_init_local_mac(ath79_eth0_data.mac_addr, - art + WNDR3700_ETH0_MAC_OFFSET); - ath79_eth0_pll_data.pll_1000 = 0x11110000; - ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, - art + WNDR3700_ETH1_MAC_OFFSET, 0); - ath79_eth1_pll_data.pll_1000 = 0x11110000; - ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), - wndr3700_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wndr3700_gpio_keys), - wndr3700_gpio_keys); - - platform_device_register(&wndr3700_rtl8366s_device); - platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0); - - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_led_pin(1, 5); - - /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */ - ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6)); - - /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */ - ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6)); - - ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET, - art + WNDR3700_WMAC0_MAC_OFFSET, - art + WNDR3700_CALDATA1_OFFSET, - art + WNDR3700_WMAC1_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700", - "NETGEAR WNDR3700/WNDR3800/WNDRMAC", - wndr3700_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c deleted file mode 100644 index bd86db386..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * NETGEAR WNR2000 board support - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WNR2000_GPIO_LED_PWR_GREEN 14 -#define WNR2000_GPIO_LED_PWR_AMBER 7 -#define WNR2000_GPIO_LED_WPS 4 -#define WNR2000_GPIO_LED_WLAN 6 -#define WNR2000_GPIO_BTN_RESET 21 -#define WNR2000_GPIO_BTN_WPS 8 - -#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL) - -static struct mtd_partition wnr2000_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x240000, - }, { - .name = "user-config", - .offset = 0x290000, - .size = 0x010000, - }, { - .name = "uImage", - .offset = 0x2a0000, - .size = 0x120000, - }, { - .name = "language_table", - .offset = 0x3c0000, - .size = 0x020000, - }, { - .name = "rootfs_checksum", - .offset = 0x3e0000, - .size = 0x010000, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data wnr2000_flash_data = { - .parts = wnr2000_partitions, - .nr_parts = ARRAY_SIZE(wnr2000_partitions), -}; - -static struct gpio_led wnr2000_leds_gpio[] __initdata = { - { - .name = "wnr2000:green:power", - .gpio = WNR2000_GPIO_LED_PWR_GREEN, - .active_low = 1, - }, { - .name = "wnr2000:amber:power", - .gpio = WNR2000_GPIO_LED_PWR_AMBER, - .active_low = 1, - }, { - .name = "wnr2000:green:wps", - .gpio = WNR2000_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "wnr2000:blue:wlan", - .gpio = WNR2000_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000_GPIO_BTN_WPS, - } -}; - -static void __init wnr2000_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&wnr2000_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio), - wnr2000_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wnr2000_gpio_keys), - wnr2000_gpio_keys); - - ath79_register_wmac(eeprom, NULL); -} - -MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c deleted file mode 100644 index 148cd7c7f..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Compex WP543/WPJ543 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define WP543_GPIO_SW6 2 -#define WP543_GPIO_LED_1 3 -#define WP543_GPIO_LED_2 4 -#define WP543_GPIO_LED_WLAN 5 -#define WP543_GPIO_LED_CONN 6 -#define WP543_GPIO_LED_DIAG 7 -#define WP543_GPIO_SW4 8 - -#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL) - -static struct gpio_led wp543_leds_gpio[] __initdata = { - { - .name = "wp543:green:led1", - .gpio = WP543_GPIO_LED_1, - .active_low = 1, - }, { - .name = "wp543:green:led2", - .gpio = WP543_GPIO_LED_2, - .active_low = 1, - }, { - .name = "wp543:green:wlan", - .gpio = WP543_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "wp543:green:conn", - .gpio = WP543_GPIO_LED_CONN, - .active_low = 1, - }, { - .name = "wp543:green:diag", - .gpio = WP543_GPIO_LED_DIAG, - .active_low = 1, - } -}; - -static struct gpio_keys_button wp543_gpio_keys[] __initdata = { - { - .desc = "sw6", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, - .gpio = WP543_GPIO_SW6, - }, { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, - .gpio = WP543_GPIO_SW4, - } -}; - -static const char *wp543_part_probes[] = { - "MyLoader", - NULL, -}; - -static struct flash_platform_data wp543_flash_data = { - .part_probes = wp543_part_probes, -}; - -static void __init wp543_setup(void) -{ - ath79_register_m25p80(&wp543_flash_data); - - ath79_register_mdio(0, 0xfffffff0); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = 0x0f; - ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC | - AR71XX_RESET_GE0_PHY; - ath79_register_eth(0); - - ath79_register_usb(); - ath79_register_pci(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), - wp543_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wp543_gpio_keys), - wp543_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wpe72.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wpe72.c deleted file mode 100644 index 114d6233c..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wpe72.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Compex WPE72 board support - * - * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include<asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define WPE72_GPIO_RESET 12 -#define WPE72_GPIO_LED_DIAG 13 -#define WPE72_GPIO_LED_1 14 -#define WPE72_GPIO_LED_2 15 -#define WPE72_GPIO_LED_3 16 -#define WPE72_GPIO_LED_4 17 - -#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL) - -static struct gpio_led wpe72_leds_gpio[] __initdata = { - { - .name = "wpe72:green:led1", - .gpio = WPE72_GPIO_LED_1, - .active_low = 1, - }, { - .name = "wpe72:green:led2", - .gpio = WPE72_GPIO_LED_2, - .active_low = 1, - }, { - .name = "wpe72:green:led3", - .gpio = WPE72_GPIO_LED_3, - .active_low = 1, - }, { - .name = "wpe72:green:led4", - .gpio = WPE72_GPIO_LED_4, - .active_low = 1, - }, { - .name = "wpe72:green:diag", - .gpio = WPE72_GPIO_LED_DIAG, - .active_low = 1, - } -}; - -static struct gpio_keys_button wpe72_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPE72_GPIO_RESET, - } -}; - -static const char *wpe72_part_probes[] = { - "MyLoader", - NULL, -}; - -static struct flash_platform_data wpe72_flash_data = { - .part_probes = wpe72_part_probes, -}; - -static void __init wpe72_setup(void) -{ - ath79_register_m25p80(&wpe72_flash_data); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - ath79_register_pci(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio), - wpe72_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpe72_gpio_keys), - wpe72_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c deleted file mode 100644 index 21aefe00a..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Linksys WRT160NL board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "nvram.h" -#include "machtypes.h" - -#define WRT160NL_GPIO_LED_POWER 14 -#define WRT160NL_GPIO_LED_WPS_AMBER 9 -#define WRT160NL_GPIO_LED_WPS_BLUE 8 -#define WRT160NL_GPIO_LED_WLAN 6 - -#define WRT160NL_GPIO_BTN_WPS 7 -#define WRT160NL_GPIO_BTN_RESET 21 - -#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL) - -#define WRT160NL_NVRAM_ADDR 0x1f7e0000 -#define WRT160NL_NVRAM_SIZE 0x10000 - -static const char *wrt160nl_part_probes[] = { - "wrt160nl", - NULL, -}; - -static struct flash_platform_data wrt160nl_flash_data = { - .part_probes = wrt160nl_part_probes, -}; - -static struct gpio_led wrt160nl_leds_gpio[] __initdata = { - { - .name = "wrt160nl:blue:power", - .gpio = WRT160NL_GPIO_LED_POWER, - .active_low = 1, - .default_trigger = "default-on", - }, { - .name = "wrt160nl:amber:wps", - .gpio = WRT160NL_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, { - .name = "wrt160nl:blue:wps", - .gpio = WRT160NL_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, { - .name = "wrt160nl:blue:wlan", - .gpio = WRT160NL_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, - .gpio = WRT160NL_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, - .gpio = WRT160NL_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init wrt160nl_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - - if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, - "lan_hwaddr=", mac) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - } - - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = 0x01; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&wrt160nl_flash_data); - - ath79_register_usb(); - - if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, - "wl0_hwaddr=", mac) == 0) - ath79_register_wmac(eeprom, mac); - else - ath79_register_wmac(eeprom, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio), - wrt160nl_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wrt160nl_gpio_keys), - wrt160nl_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL", - wrt160nl_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c deleted file mode 100644 index 6c4c1cb0d..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Linksys WRT400N board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define WRT400N_GPIO_LED_POWER 1 -#define WRT400N_GPIO_LED_WPS_BLUE 4 -#define WRT400N_GPIO_LED_WPS_AMBER 5 -#define WRT400N_GPIO_LED_WLAN 6 - -#define WRT400N_GPIO_BTN_RESET 8 -#define WRT400N_GPIO_BTN_WLSEC 3 - -#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) - -#define WRT400N_MAC_ADDR_OFFSET 0x120c -#define WRT400N_CALDATA0_OFFSET 0x1000 -#define WRT400N_CALDATA1_OFFSET 0x5000 - -static struct mtd_partition wrt400n_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "env", - .offset = 0x030000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "linux", - .offset = 0x040000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x180000, - .size = 0x630000, - }, { - .name = "nvram", - .offset = 0x7b0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "factory", - .offset = 0x7c0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "language", - .offset = 0x7d0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "caldata", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x040000, - .size = 0x770000, - } -}; - -static struct flash_platform_data wrt400n_flash_data = { - .parts = wrt400n_partitions, - .nr_parts = ARRAY_SIZE(wrt400n_partitions), -}; - -static struct gpio_led wrt400n_leds_gpio[] __initdata = { - { - .name = "wrt400n:blue:wps", - .gpio = WRT400N_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, { - .name = "wrt400n:amber:wps", - .gpio = WRT400N_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, { - .name = "wrt400n:blue:wlan", - .gpio = WRT400N_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "wrt400n:blue:power", - .gpio = WRT400N_GPIO_LED_POWER, - .active_low = 0, - .default_trigger = "default-on", - } -}; - -static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, - .gpio = WRT400N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wlsec", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, - .gpio = WRT400N_GPIO_BTN_WLSEC, - .active_low = 1, - } -}; - -static void __init wrt400n_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&wrt400n_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), - wrt400n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wrt400n_gpio_keys), - wrt400n_gpio_keys); - - ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, - art + WRT400N_CALDATA1_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c deleted file mode 100644 index 1223e842d..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Buffalo WZR-HP-AG300H board support - * - * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WZRHPAG300H_MAC_OFFSET 0x20c -#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL) - -static struct mtd_partition wzrhpag300h_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e90000, - }, { - .name = "user_property", - .offset = 0x1ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f90000, - } -}; - -static struct flash_platform_data wzrhpag300h_flash_data = { - .parts = wzrhpag300h_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions), -}; - -static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 1, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 3, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 5, - .active_low = 1, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 6, - .active_low = 1, - }, { - .desc = "router_off", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 1, - } -}; - -static void __init wzrhpag300h_setup(void) -{ - u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000); - u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000); - u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET; - u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1); - - ath79_register_mdio(0, ~(BIT(0) | BIT(4))); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = BIT(4); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - gpio_request(2, "usb"); - gpio_direction_output(2, 1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio), - wzrhpag300h_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpag300h_gpio_keys), - wzrhpag300h_gpio_keys); - - ath79_register_m25p80_multi(&wzrhpag300h_flash_data); - - ap94_pci_init(eeprom1, mac1, eeprom2, mac2); -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", - "Buffalo WZR-HP-AG300H", wzrhpag300h_setup); - diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c deleted file mode 100644 index 94f352ace..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Buffalo WZR-HP-G300NH board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/nxp_74hc153.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WZRHPG300NH_GPIO_LED_USB 0 -#define WZRHPG300NH_GPIO_LED_DIAG 1 -#define WZRHPG300NH_GPIO_LED_WIRELESS 6 -#define WZRHPG300NH_GPIO_LED_SECURITY 17 -#define WZRHPG300NH_GPIO_LED_ROUTER 18 - -#define WZRHPG300NH_GPIO_RTL8366_SDA 19 -#define WZRHPG300NH_GPIO_RTL8366_SCK 20 - -#define WZRHPG300NH_GPIO_74HC153_S0 9 -#define WZRHPG300NH_GPIO_74HC153_S1 11 -#define WZRHPG300NH_GPIO_74HC153_1Y 12 -#define WZRHPG300NH_GPIO_74HC153_2Y 14 - -#define WZRHPG300NH_GPIO_EXP_BASE 32 -#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0) -#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1) -#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2) -#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3) -#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5) -#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6) -#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7) - -#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL) - -#define WZRHPG300NH_MAC_OFFSET 0x20c - -static struct mtd_partition wzrhpg300nh_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e60000, - }, { - .name = "user_property", - .offset = 0x1fc0000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x1fe0000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f60000, - } -}; - -static struct physmap_flash_data wzrhpg300nh_flash_data = { - .width = 2, - .parts = wzrhpg300nh_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions), -}; - -#define WZRHPG300NH_FLASH_BASE 0x1e000000 -#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024) - -static struct resource wzrhpg300nh_flash_resources[] = { - [0] = { - .start = WZRHPG300NH_FLASH_BASE, - .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device wzrhpg300nh_flash_device = { - .name = "physmap-flash", - .id = -1, - .resource = wzrhpg300nh_flash_resources, - .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources), - .dev = { - .platform_data = &wzrhpg300nh_flash_data, - } -}; - -static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = { - { - .name = "buffalo:orange:security", - .gpio = WZRHPG300NH_GPIO_LED_SECURITY, - .active_low = 1, - }, { - .name = "buffalo:green:wireless", - .gpio = WZRHPG300NH_GPIO_LED_WIRELESS, - .active_low = 1, - }, { - .name = "buffalo:green:router", - .gpio = WZRHPG300NH_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "buffalo:red:diag", - .gpio = WZRHPG300NH_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "buffalo:blue:usb", - .gpio = WZRHPG300NH_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_AOSS, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_USB, - .active_low = 1, - }, { - .desc = "qos_on", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON, - .active_low = 0, - }, { - .desc = "qos_off", - .type = EV_KEY, - .code = BTN_4, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF, - .active_low = 0, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON, - .active_low = 0, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO, - .active_low = 0, - } -}; - -static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = { - .gpio_base = WZRHPG300NH_GPIO_EXP_BASE, - .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0, - .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1, - .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y, - .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y, -}; - -static struct platform_device wzrhpg300nh_74hc153_device = { - .name = NXP_74HC153_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_74hc153_data, - } -}; - -static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = { - .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA, - .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK, -}; - -static struct platform_device wzrhpg300nh_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_rtl8366_data, - } -}; - -static struct platform_device wzrhpg300nh_rtl8366rb_device = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_rtl8366_data, - } -}; - -static void __init wzrhpg300nh_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET; - bool hasrtl8366rb = false; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB) - hasrtl8366rb = true; - - if (hasrtl8366rb) { - ath79_eth0_pll_data.pll_1000 = 0x1f000000; - ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; - ath79_eth1_pll_data.pll_1000 = 0x100; - ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; - } else { - ath79_eth0_pll_data.pll_1000 = 0x1e000100; - ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; - ath79_eth1_pll_data.pll_1000 = 0x1e000100; - ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; - } - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - ath79_register_wmac(eeprom, NULL); - - platform_device_register(&wzrhpg300nh_74hc153_device); - platform_device_register(&wzrhpg300nh_flash_device); - - if (hasrtl8366rb) - platform_device_register(&wzrhpg300nh_rtl8366rb_device); - else - platform_device_register(&wzrhpg300nh_rtl8366s_device); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio), - wzrhpg300nh_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg300nh_gpio_keys), - wzrhpg300nh_gpio_keys); - -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", - "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c deleted file mode 100644 index 6ccafcb49..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Buffalo WZR-HP-G300NH2 board support - * - * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WZRHPG300NH2_MAC_OFFSET 0x20c -#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL) - -static struct mtd_partition wzrhpg300nh2_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e90000, - }, { - .name = "user_property", - .offset = 0x1ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f90000, - } -}; - -static struct flash_platform_data wzrhpg300nh2_flash_data = { - .parts = wzrhpg300nh2_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions), -}; - -static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 16, - .active_low = 1, - }, -}; - -static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { - { - .name = "buffalo:blue:usb", - .gpio = 4, - .active_low = 1, - }, - { - .name = "buffalo:orange:security", - .gpio = 6, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 7, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_on", - .gpio = 8, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_off", - .gpio = 9, - .active_low = 1, - }, -}; - -/* The AOSS button is wmac gpio 12 */ -static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 1, - }, { - .desc = "qos", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 0, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 0, - }, -}; - -static void __init wzrhpg300nh2_setup(void) -{ - - u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000); - u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET; - /* There is an eth1 but it is not connected to the switch */ - - ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); - ath79_register_mdio(0, ~(BIT(0))); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_eth(0); - ath79_register_usb(); - /* gpio13 is usb power. Turn it on. */ - gpio_request(13, "usb"); - gpio_direction_output(13, 1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio), - wzrhpg300nh2_leds_gpio); - ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg300nh2_gpio_keys), - wzrhpg300nh2_gpio_keys); - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio, - ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); - - ap91_pci_init(eeprom, mac0); -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2", - "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c deleted file mode 100644 index f60614557..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Buffalo WZR-HP-G450G board support - * - * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL) - -static struct mtd_partition wzrhpg450h_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - }, { - .name = "ART", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "uImage", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e80000, - }, { - .name = "user_property", - .offset = 0x1fe0000, - .size = 0x0020000, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f80000, - } -}; - -static struct flash_platform_data wzrhpg450h_flash_data = { - .parts = wzrhpg450h_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), -}; - -static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 14, - .active_low = 1, - }, - { - .name = "buffalo:orange:security", - .gpio = 13, - .active_low = 1, - }, -}; - - -static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = { - { - .name = "buffalo:blue:movie_engine", - .gpio = 13, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 14, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 6, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 1, - }, { - .desc = "movie_engine", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 0, - }, { - .desc = "router_off", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 0, - } -}; - - -static void __init wzrhpg450h_init(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1f051000); - u8 *mac = (u8 *) ee + 2; - - ath79_register_m25p80_multi(&wzrhpg450h_flash_data); - - ath79_register_mdio(0, ~BIT(0)); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio), - wzrhpg450h_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg450h_gpio_keys), - wzrhpg450h_gpio_keys); - - ath79_register_eth(0); - - ath79_register_usb(); - gpio_request(16, "usb"); - gpio_direction_output(16, 1); - - ap91_pci_init(ee, NULL); - ap9x_pci_setup_wmac_led_pin(0, 15); - ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio, - ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio)); -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H", - wzrhpg450h_init); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c deleted file mode 100644 index af6db6ad6..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Zcomax ZCN-1523H-2-8/5-16 board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "machtypes.h" - -#define ZCN_1523H_GPIO_BTN_RESET 0 -#define ZCN_1523H_GPIO_LED_INIT 11 -#define ZCN_1523H_GPIO_LED_LAN1 17 - -#define ZCN_1523H_2_GPIO_LED_WEAK 13 -#define ZCN_1523H_2_GPIO_LED_MEDIUM 14 -#define ZCN_1523H_2_GPIO_LED_STRONG 15 - -#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1 -#define ZCN_1523H_5_GPIO_LED_LAN2 13 -#define ZCN_1523H_5_GPIO_LED_WEAK 14 -#define ZCN_1523H_5_GPIO_LED_MEDIUM 15 -#define ZCN_1523H_5_GPIO_LED_STRONG 16 - -#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL) - -static struct mtd_partition zcn_1523h_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x050000, - .size = 0x610000, - }, { - .name = "kernel", - .offset = 0x660000, - .size = 0x170000, - }, { - .name = "configure", - .offset = 0x7d0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "mfg", - .offset = 0x7e0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "eeprom", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x050000, - .size = 0x780000, - } -}; - -static struct flash_platform_data zcn_1523h_flash_data = { - .parts = zcn_1523h_partitions, - .nr_parts = ARRAY_SIZE(zcn_1523h_partitions), -}; - -static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL, - .gpio = ZCN_1523H_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:amber:init", - .gpio = ZCN_1523H_GPIO_LED_INIT, - .active_low = 1, - }, { - .name = "zcn-1523h:green:lan1", - .gpio = ZCN_1523H_GPIO_LED_LAN1, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:red:weak", - .gpio = ZCN_1523H_2_GPIO_LED_WEAK, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:medium", - .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM, - .active_low = 1, - }, { - .name = "zcn-1523h:green:strong", - .gpio = ZCN_1523H_2_GPIO_LED_STRONG, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:red:weak", - .gpio = ZCN_1523H_5_GPIO_LED_WEAK, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:medium", - .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM, - .active_low = 1, - }, { - .name = "zcn-1523h:green:strong", - .gpio = ZCN_1523H_5_GPIO_LED_STRONG, - .active_low = 1, - }, { - .name = "zcn-1523h:green:lan2", - .gpio = ZCN_1523H_5_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:unknown", - .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN, - } -}; - -static void __init zcn_1523h_generic_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(&zcn_1523h_flash_data); - - ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio), - zcn_1523h_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(zcn_1523h_gpio_keys), - zcn_1523h_gpio_keys); - - ap91_pci_init(ee, mac); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN1 port */ - ath79_register_eth(0); -} - -static void __init zcn_1523h_2_setup(void) -{ - zcn_1523h_generic_setup(); - ap9x_pci_setup_wmac_gpio(0, BIT(9), 0); - - ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio), - zcn_1523h_2_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2", - zcn_1523h_2_setup); - -static void __init zcn_1523h_5_setup(void) -{ - zcn_1523h_generic_setup(); - ap9x_pci_setup_wmac_gpio(0, BIT(8), 0); - - ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio), - zcn_1523h_5_leds_gpio); - - /* LAN2 port */ - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5", - zcn_1523h_5_setup); diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c deleted file mode 100644 index 43911b8ac..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Atheros AR71xx minimal nvram support - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/vmalloc.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/string.h> - -#include "nvram.h" - -char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len) -{ - unsigned len = strlen(name); - char *cur, *last; - - if (buf_len == 0 || len == 0) - return NULL; - - if (buf_len < len) - return NULL; - - if (len == 1) - return memchr(buf, (int) *name, buf_len); - - last = (char *) buf + buf_len - len; - for (cur = (char *) buf; cur <= last; cur++) - if (cur[0] == name[0] && memcmp(cur, name, len) == 0) - return cur + len; - - return NULL; -} - -int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, - const char *name, char *mac) -{ - char *buf; - char *mac_str; - int ret; - int t; - - buf = vmalloc(nvram_len); - if (!buf) - return -ENOMEM; - - memcpy(buf, nvram, nvram_len); - buf[nvram_len - 1] = '\0'; - - mac_str = ath79_nvram_find_var(name, buf, nvram_len); - if (!mac_str) { - ret = -EINVAL; - goto free; - } - - t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); - - if (t != 6) { - ret = -EINVAL; - goto free; - } - - ret = 0; - -free: - vfree(buf); - return ret; -} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h deleted file mode 100644 index 75151d4a3..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Atheros AR71xx minimal nvram support - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_NVRAM_H -#define _ATH79_NVRAM_H - -char *ath79_nvram_find_var(const char *name, const char *buf, - unsigned buf_len); -int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, - const char *name, char *mac); - -#endif /* _ATH79_NVRAM_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c deleted file mode 100644 index c395fb434..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Atheros AP94 reference board PCI initialization - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/pci.h> - -struct ath9k_fixup { - u16 *cal_data; - unsigned slot; -}; - -static int ath9k_num_fixups; -static struct ath9k_fixup ath9k_fixups[2]; - -static void ath9k_pci_fixup(struct pci_dev *dev) -{ - void __iomem *mem; - u16 *cal_data = NULL; - u16 cmd; - u32 bar0; - u32 val; - unsigned i; - - for (i = 0; i < ath9k_num_fixups; i++) { - if (ath9k_fixups[i].cal_data == NULL) - continue; - - if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) - continue; - - cal_data = ath9k_fixups[i].cal_data; - break; - } - - if (cal_data == NULL) - return; - - if (*cal_data != 0xa55a) { - pr_err("pci %s: invalid calibration data\n", pci_name(dev)); - return; - } - - pr_info("pci %s: fixup device configuration\n", pci_name(dev)); - - mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); - if (!mem) { - pr_err("pci %s: ioremap error\n", pci_name(dev)); - return; - } - - pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); - - switch (ath79_soc) { - case ATH79_SOC_AR7161: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, - AR71XX_PCI_MEM_BASE); - break; - case ATH79_SOC_AR7240: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); - break; - - case ATH79_SOC_AR7241: - case ATH79_SOC_AR7242: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); - break; - - default: - BUG(); - } - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(dev, PCI_COMMAND, cmd); - - /* set pointer to first reg address */ - cal_data += 3; - while (*cal_data != 0xffff) { - u32 reg; - reg = *cal_data++; - val = *cal_data++; - val |= (*cal_data++) << 16; - - __raw_writel(val, mem + reg); - udelay(100); - } - - pci_read_config_dword(dev, PCI_VENDOR_ID, &val); - dev->vendor = val & 0xffff; - dev->device = (val >> 16) & 0xffff; - - pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); - dev->revision = val & 0xff; - dev->class = val >> 8; /* upper 3 bytes */ - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); - - iounmap(mem); -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); - -void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) -{ - if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) - return; - - ath9k_fixups[ath9k_num_fixups].slot = slot; - ath9k_fixups[ath9k_num_fixups].cal_data = cal_data; - ath9k_num_fixups++; -} diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h deleted file mode 100644 index 5794941f0..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PCI_ATH9K_FIXUP -#define _PCI_ATH9K_FIXUP - -void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init; - -#endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h deleted file mode 100644 index 43e67557a..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Atheros AR71xx SoC specific platform data definitions - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_ATH79_PLATFORM_H -#define __ASM_MACH_ATH79_PLATFORM_H - -#include <linux/if_ether.h> -#include <linux/skbuff.h> -#include <linux/phy.h> -#include <linux/spi/spi.h> - -struct ag71xx_switch_platform_data { - u8 phy4_mii_en:1; -}; - -struct ag71xx_platform_data { - phy_interface_t phy_if_mode; - u32 phy_mask; - int speed; - int duplex; - u32 reset_bit; - u8 mac_addr[ETH_ALEN]; - struct device *mii_bus_dev; - - u8 has_gbit:1; - u8 is_ar91xx:1; - u8 is_ar7240:1; - u8 is_ar724x:1; - u8 has_ar8216:1; - - struct ag71xx_switch_platform_data *switch_data; - - void (*ddr_flush)(void); - void (*set_speed)(int speed); - - u32 fifo_cfg1; - u32 fifo_cfg2; - u32 fifo_cfg3; -}; - -struct ag71xx_mdio_platform_data { - u32 phy_mask; - int is_ar7240; -}; - -#endif /* __ASM_MACH_ATH79_PLATFORM_H */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h deleted file mode 100644 index 3e6fc50c5..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * MikroTik RouterBOARD 750 definitions - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#ifndef _MACH_RB750_H -#define _MACH_RB750_H - -#include <linux/bitops.h> - -#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */ -#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */ -#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */ -#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */ -#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */ -#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */ -#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */ -#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */ -#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */ -#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */ -#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */ -#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */ -#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */ -#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */ -#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */ - -#define RB750_GPIO_BTN_RESET 1 -#define RB750_GPIO_SPI_CS0 2 -#define RB750_GPIO_LED_ACT 12 -#define RB750_GPIO_LED_PORT1 13 -#define RB750_GPIO_LED_PORT2 14 -#define RB750_GPIO_LED_PORT3 15 -#define RB750_GPIO_LED_PORT4 16 -#define RB750_GPIO_LED_PORT5 17 - -#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT) -#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1) -#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2) -#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3) -#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4) -#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5) - -#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE) - -#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \ - RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT) - -struct rb750_led_data { - char *name; - char *default_trigger; - u32 mask; - int active_low; -}; - -struct rb750_led_platform_data { - int num_leds; - struct rb750_led_data *leds; -}; - -int rb750_latch_change(u32 mask_clr, u32 mask_set); -void rb750_nand_pins_enable(void); -void rb750_nand_pins_disable(void); - -#endif /* _MACH_RB750_H */
\ No newline at end of file diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h deleted file mode 100644 index 5b17e94b6..000000000 --- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This file was based on the patches for Linux 2.6.27.39 published by - * MikroTik for their RouterBoard 4xx series devices. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define CPLD_GPIO_nLED1 0 -#define CPLD_GPIO_nLED2 1 -#define CPLD_GPIO_nLED3 2 -#define CPLD_GPIO_nLED4 3 -#define CPLD_GPIO_FAN 4 -#define CPLD_GPIO_ALE 5 -#define CPLD_GPIO_CLE 6 -#define CPLD_GPIO_nCE 7 -#define CPLD_GPIO_nLED5 8 - -#define CPLD_NUM_GPIOS 9 - -#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1) -#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2) -#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3) -#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4) -#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN) -#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE) -#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE) -#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE) -#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5) - -struct rb4xx_cpld_platform_data { - unsigned gpio_base; -}; - -extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value); -extern int rb4xx_cpld_read(unsigned char *rx_buf, - const unsigned char *verify_buf, - unsigned cnt); -extern int rb4xx_cpld_read_from(unsigned addr, - unsigned char *rx_buf, - const unsigned char *verify_buf, - unsigned cnt); -extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count); |