diff options
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network')
| -rw-r--r-- | target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network | 69 |
1 files changed, 0 insertions, 69 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network deleted file mode 100644 index 69d7dc712..000000000 --- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network +++ /dev/null @@ -1,69 +0,0 @@ -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0.1 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - -config interface wan - option ifname eth1 - option proto dhcp - -config switch - option name rtl8366s - option reset 1 - option enable_vlan 1 - # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms - option blinkrate 2 - -config switch_vlan - option device rtl8366s - option vlan 1 - option ports "0 1 2 3 5t" - -config switch_port - # Port 1 controls the GREEN configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; - # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; - # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; - # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); - # 14: Link (master); 15: separate register - - option device rtl8366s - option port 1 - option led 6 - -config switch_port - # Port 2 controls the ORANGE configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 2 - option led 9 - -config switch_port - # Port 5 controls the configuration of the WAN LED and the - # section does not correspond to a real switch port. - # - # To toggle the use of green or orange LEDs for the WAN port, - # see the LED setting for wndr3700:green:wan in /etc/config/system. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 5 - option led 2 |