1 files changed, 0 insertions, 92 deletions
diff --git a/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch b/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch
deleted file mode 100644
index dd4bb76a3..000000000
--- a/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-This is a hack to make cpmac work with the external switch on a DG834 v3; it
-should also work on other similar routers. It has not been tested on hardware
-with multiple cpmac devices or with no external switch. It may be safer to
-move external_switch to pdata rather than trying to detect it, and to set
-phy_mask correctly rather than moving the phy search loop.
-
---- a/drivers/net/cpmac.c	2008-11-11 06:18:24.000000000 +1100
-+++ b/drivers/net/cpmac.c	2009-04-11 10:58:58.000000000 +1000
-@@ -1124,8 +1124,8 @@
- 
- static int __devinit cpmac_probe(struct platform_device *pdev)
- {
-	int rc, phy_id;
--	char *mdio_bus_id = "0";
-+	char mdio_bus_id[BUS_ID_SIZE];
- 	struct resource *mem;
- 	struct cpmac_priv *priv;
- 	struct net_device *dev;
-@@ -1134,22 +1134,23 @@
- 
- 	pdata = pdev->dev.platform_data;
- 
--	for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
--		if (!(pdata->phy_mask & (1 << phy_id)))
--			continue;
--		if (!cpmac_mii.phy_map[phy_id])
--			continue;
--		break;
-+	if (external_switch || dumb_switch) {
-+		strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
-+		phy_id = pdev->id;
-+	} else {
-+		for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
-+			if (!(pdata->phy_mask & (1 << phy_id)))
-+				continue;
-+			if (!cpmac_mii.phy_map[phy_id])
-+				continue;
-+			strncpy(mdio_bus_id, cpmac_mii.id, BUS_ID_SIZE);
-+			break;
-+		}
- 	}
- 
- 	if (phy_id == PHY_MAX_ADDR) {
--		if (external_switch || dumb_switch) {
--			mdio_bus_id = 0; /* fixed phys bus */
--			phy_id = pdev->id;
--		} else {
--			dev_err(&pdev->dev, "no PHY present\n");
--			return -ENODEV;
--		}
-+		dev_err(&pdev->dev, "no PHY present\n");
-+		return -ENODEV;
- 	}
- 
- #ifdef CONFIG_NETDEVICES_MULTIQUEUE
-@@ -1189,9 +1190,11 @@
- 	priv->ring_size = 64;
- 	priv->msg_enable = netif_msg_init(debug_level, 0xff);
- 	memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
-+	
-+	snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
- 
--	priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id,
--				&cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
-+	priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
-+	 			PHY_INTERFACE_MODE_MII);
- 	if (IS_ERR(priv->phy)) {
- 		if (netif_msg_drv(priv))
- 			printk(KERN_ERR "%s: Could not attach to PHY\n",
-@@ -1250,11 +1253,11 @@
- 
- 	cpmac_mii.reset(&cpmac_mii);
- 
--	for (i = 0; i < 300000; i++)
-+	for (i = 0; i < 300; i++)
- 		if ((mask = cpmac_read(cpmac_mii.priv, CPMAC_MDIO_ALIVE)))
- 			break;
- 		else
--			cpu_relax();
-+			msleep(10);
- 
- 	mask &= 0x7fffffff;
- 	if (mask & (mask - 1)) {
-@@ -1267,7 +1270,7 @@
- 	}
- 
- 	cpmac_mii.phy_mask = ~(mask | 0x80000000);
--	snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "0");
-+	snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "1");
- 
- 	res = mdiobus_register(&cpmac_mii);
- 	if (res)