diff options
Diffstat (limited to 'target/linux/adm5120/files-2.6.26/drivers/usb/host/adm5120.h')
-rw-r--r-- | target/linux/adm5120/files-2.6.26/drivers/usb/host/adm5120.h | 762 |
1 files changed, 762 insertions, 0 deletions
diff --git a/target/linux/adm5120/files-2.6.26/drivers/usb/host/adm5120.h b/target/linux/adm5120/files-2.6.26/drivers/usb/host/adm5120.h new file mode 100644 index 000000000..7c47cb8b7 --- /dev/null +++ b/target/linux/adm5120/files-2.6.26/drivers/usb/host/adm5120.h @@ -0,0 +1,762 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This file was derived from: drivers/usb/host/ohci.h + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +/* + * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to + * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the + * host controller implementation. + */ +typedef __u32 __bitwise __hc32; +typedef __u16 __bitwise __hc16; + +/* + * OHCI Endpoint Descriptor (ED) ... holds TD queue + * See OHCI spec, section 4.2 + * + * This is a "Queue Head" for those transfers, which is why + * both EHCI and UHCI call similar structures a "QH". + */ + +#define TD_DATALEN_MAX 4096 + +#define ED_ALIGN 16 +#define ED_MASK ((u32)~(ED_ALIGN-1)) /* strip hw status in low addr bits */ + +struct ed { + /* first fields are hardware-specified */ + __hc32 hwINFO; /* endpoint config bitmap */ + /* info bits defined by hcd */ +#define ED_DEQUEUE (1 << 27) + /* info bits defined by the hardware */ +#define ED_MPS_SHIFT 16 +#define ED_MPS_MASK ((1 << 11)-1) +#define ED_MPS_GET(x) (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK) +#define ED_ISO (1 << 15) /* isochronous endpoint */ +#define ED_SKIP (1 << 14) +#define ED_SPEED_FULL (1 << 13) /* fullspeed device */ +#define ED_INT (1 << 11) /* interrupt endpoint */ +#define ED_EN_SHIFT 7 /* endpoint shift */ +#define ED_EN_MASK ((1 << 4)-1) /* endpoint mask */ +#define ED_EN_GET(x) (((x) >> ED_EN_SHIFT) & ED_EN_MASK) +#define ED_FA_MASK ((1 << 7)-1) /* function address mask */ +#define ED_FA_GET(x) ((x) & ED_FA_MASK) + __hc32 hwTailP; /* tail of TD list */ + __hc32 hwHeadP; /* head of TD list (hc r/w) */ +#define ED_C (0x02) /* toggle carry */ +#define ED_H (0x01) /* halted */ + __hc32 hwNextED; /* next ED in list */ + + /* rest are purely for the driver's use */ + dma_addr_t dma; /* addr of ED */ + struct td *dummy; /* next TD to activate */ + + struct list_head urb_list; /* list of our URBs */ + + /* host's view of schedule */ + struct ed *ed_next; /* on schedule list */ + struct ed *ed_prev; /* for non-interrupt EDs */ + struct ed *ed_rm_next; /* on rm list */ + struct list_head td_list; /* "shadow list" of our TDs */ + + /* create --> IDLE --> OPER --> ... --> IDLE --> destroy + * usually: OPER --> UNLINK --> (IDLE | OPER) --> ... + */ + u8 state; /* ED_{IDLE,UNLINK,OPER} */ +#define ED_IDLE 0x00 /* NOT linked to HC */ +#define ED_UNLINK 0x01 /* being unlinked from hc */ +#define ED_OPER 0x02 /* IS linked to hc */ + + u8 type; /* PIPE_{BULK,...} */ + + /* periodic scheduling params (for intr and iso) */ + u8 branch; + u16 interval; + u16 load; + u16 last_iso; /* iso only */ + + /* HC may see EDs on rm_list until next frame (frame_no == tick) */ + u16 tick; +} __attribute__ ((aligned(ED_ALIGN))); + +/* + * OHCI Transfer Descriptor (TD) ... one per transfer segment + * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt) + * and 4.3.2 (iso) + */ + +#define TD_ALIGN 32 +#define TD_MASK ((u32)~(TD_ALIGN-1)) /* strip hw status in low addr bits */ + +struct td { + /* first fields are hardware-specified */ + __hc32 hwINFO; /* transfer info bitmask */ + + /* hwINFO bits */ +#define TD_OWN (1 << 31) /* owner of the descriptor */ +#define TD_CC_SHIFT 27 /* condition code */ +#define TD_CC_MASK 0xf +#define TD_CC (TD_CC_MASK << TD_CC_SHIFT) +#define TD_CC_GET(x) (((x) >> TD_CC_SHIFT) & TD_CC_MASK) + +#define TD_EC_SHIFT 25 /* error count */ +#define TD_EC_MASK 0x3 +#define TD_EC (TD_EC_MASK << TD_EC_SHIFT) +#define TD_EC_GET(x) ((x >> TD_EC_SHIFT) & TD_EC_MASK) +#define TD_T_SHIFT 23 /* data toggle state */ +#define TD_T_MASK 0x3 +#define TD_T (TD_T_MASK << TD_T_SHIFT) +#define TD_T_DATA0 (0x2 << TD_T_SHIFT) /* DATA0 */ +#define TD_T_DATA1 (0x3 << TD_T_SHIFT) /* DATA1 */ +#define TD_T_CARRY (0x0 << TD_T_SHIFT) /* uses ED_C */ +#define TD_T_GET(x) (((x) >> TD_T_SHIFT) & TD_T_MASK) +#define TD_DP_SHIFT 21 /* direction/pid */ +#define TD_DP_MASK 0x3 +#define TD_DP (TD_DP_MASK << TD_DP_SHIFT) +#define TD_DP_GET (((x) >> TD_DP_SHIFT) & TD_DP_MASK) +#define TD_DP_SETUP (0x0 << TD_DP_SHIFT) /* SETUP pid */ +#define TD_DP_OUT (0x1 << TD_DP_SHIFT) /* OUT pid */ +#define TD_DP_IN (0x2 << TD_DP_SHIFT) /* IN pid */ +#define TD_ISI_SHIFT 8 /* Interrupt Service Interval */ +#define TD_ISI_MASK 0x3f +#define TD_ISI_GET(x) (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK) +#define TD_FN_MASK 0x3f /* frame number */ +#define TD_FN_GET(x) ((x) & TD_FN_MASK) + + __hc32 hwDBP; /* Data Buffer Pointer (or 0) */ + __hc32 hwCBL; /* Controller/Buffer Length */ + + /* hwCBL bits */ +#define TD_BL_MASK 0xffff /* buffer length */ +#define TD_BL_GET(x) ((x) & TD_BL_MASK) +#define TD_IE (1 << 16) /* interrupt enable */ + __hc32 hwNextTD; /* Next TD Pointer */ + + /* rest are purely for the driver's use */ + __u8 index; + struct ed *ed; + struct td *td_hash; /* dma-->td hashtable */ + struct td *next_dl_td; + struct urb *urb; + + dma_addr_t td_dma; /* addr of this TD */ + dma_addr_t data_dma; /* addr of data it points to */ + + struct list_head td_list; /* "shadow list", TDs on same ED */ + + u32 flags; +#define TD_FLAG_DONE (1 << 17) /* retired to done list */ +#define TD_FLAG_ISO (1 << 16) /* copy of ED_ISO */ +} __attribute__ ((aligned(TD_ALIGN))); /* c/b/i need 16; only iso needs 32 */ + +/* + * Hardware transfer status codes -- CC from td->hwINFO + */ +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_CC_DEVNOTRESP 0x05 +#define TD_CC_PIDCHECKFAIL 0x06 +#define TD_CC_UNEXPECTEDPID 0x07 +#define TD_CC_DATAOVERRUN 0x08 +#define TD_CC_DATAUNDERRUN 0x09 + /* 0x0A, 0x0B reserved for hardware */ +#define TD_CC_BUFFEROVERRUN 0x0C +#define TD_CC_BUFFERUNDERRUN 0x0D + /* 0x0E, 0x0F reserved for HCD */ +#define TD_CC_HCD0 0x0E +#define TD_CC_NOTACCESSED 0x0F + +/* + * preshifted status codes + */ +#define TD_SCC_NOTACCESSED (TD_CC_NOTACCESSED << TD_CC_SHIFT) + + +/* map OHCI TD status codes (CC) to errno values */ +static const int cc_to_error [16] = { + /* No Error */ 0, + /* CRC Error */ -EILSEQ, + /* Bit Stuff */ -EPROTO, + /* Data Togg */ -EILSEQ, + /* Stall */ -EPIPE, + /* DevNotResp */ -ETIME, + /* PIDCheck */ -EPROTO, + /* UnExpPID */ -EPROTO, + /* DataOver */ -EOVERFLOW, + /* DataUnder */ -EREMOTEIO, + /* (for hw) */ -EIO, + /* (for hw) */ -EIO, + /* BufferOver */ -ECOMM, + /* BuffUnder */ -ENOSR, + /* (for HCD) */ -EALREADY, + /* (for HCD) */ -EALREADY +}; + +#define NUM_INTS 32 + +/* + * This is the structure of the OHCI controller's memory mapped I/O region. + * You must use readl() and writel() (in <asm/io.h>) to access these fields!! + * Layout is in section 7 (and appendix B) of the spec. + */ +struct admhcd_regs { + __hc32 gencontrol; /* General Control */ + __hc32 int_status; /* Interrupt Status */ + __hc32 int_enable; /* Interrupt Enable */ + __hc32 reserved00; + __hc32 host_control; /* Host General Control */ + __hc32 reserved01; + __hc32 fminterval; /* Frame Interval */ + __hc32 fmnumber; /* Frame Number */ + __hc32 reserved02; + __hc32 reserved03; + __hc32 reserved04; + __hc32 reserved05; + __hc32 reserved06; + __hc32 reserved07; + __hc32 reserved08; + __hc32 reserved09; + __hc32 reserved10; + __hc32 reserved11; + __hc32 reserved12; + __hc32 reserved13; + __hc32 reserved14; + __hc32 reserved15; + __hc32 reserved16; + __hc32 reserved17; + __hc32 reserved18; + __hc32 reserved19; + __hc32 reserved20; + __hc32 reserved21; + __hc32 lsthresh; /* Low Speed Threshold */ + __hc32 rhdesc; /* Root Hub Descriptor */ +#define MAX_ROOT_PORTS 2 + __hc32 portstatus[MAX_ROOT_PORTS]; /* Port Status */ + __hc32 hosthead; /* Host Descriptor Head */ +} __attribute__ ((aligned(32))); + +/* + * General Control register bits + */ +#define ADMHC_CTRL_UHFE (1 << 0) /* USB Host Function Enable */ +#define ADMHC_CTRL_SIR (1 << 1) /* Software Interrupt request */ +#define ADMHC_CTRL_DMAA (1 << 2) /* DMA Arbitration Control */ +#define ADMHC_CTRL_SR (1 << 3) /* Software Reset */ + +/* + * Host General Control register bits + */ +#define ADMHC_HC_BUSS 0x3 /* USB bus state */ +#define ADMHC_BUSS_RESET 0x0 +#define ADMHC_BUSS_RESUME 0x1 +#define ADMHC_BUSS_OPER 0x2 +#define ADMHC_BUSS_SUSPEND 0x3 +#define ADMHC_HC_DMAE (1 << 2) /* DMA enable */ + +/* + * Interrupt Status/Enable register bits + */ +#define ADMHC_INTR_SOFI (1 << 4) /* start of frame */ +#define ADMHC_INTR_RESI (1 << 5) /* resume detected */ +#define ADMHC_INTR_6 (1 << 6) /* unknown */ +#define ADMHC_INTR_7 (1 << 7) /* unknown */ +#define ADMHC_INTR_BABI (1 << 8) /* babble detected */ +#define ADMHC_INTR_INSM (1 << 9) /* root hub status change */ +#define ADMHC_INTR_SO (1 << 10) /* scheduling overrun */ +#define ADMHC_INTR_FNO (1 << 11) /* frame number overflow */ +#define ADMHC_INTR_TDC (1 << 20) /* transfer descriptor completed */ +#define ADMHC_INTR_SWI (1 << 29) /* software interrupt */ +#define ADMHC_INTR_FATI (1 << 30) /* fatal error */ +#define ADMHC_INTR_INTA (1 << 31) /* interrupt active */ + +#define ADMHC_INTR_MIE (1 << 31) /* master interrupt enable */ + +/* + * SOF Frame Interval register bits + */ +#define ADMHC_SFI_FI_MASK ((1 << 14)-1) /* Frame Interval value */ +#define ADMHC_SFI_FSLDP_SHIFT 16 +#define ADMHC_SFI_FSLDP_MASK ((1 << 15)-1) +#define ADMHC_SFI_FIT (1 << 31) /* Frame Interval Toggle */ + +/* + * SOF Frame Number register bits + */ +#define ADMHC_SFN_FN_MASK ((1 << 16)-1) /* Frame Number Mask */ +#define ADMHC_SFN_FR_SHIFT 16 /* Frame Remaining Shift */ +#define ADMHC_SFN_FR_MASK ((1 << 14)-1) /* Frame Remaining Mask */ +#define ADMHC_SFN_FRT (1 << 31) /* Frame Remaining Toggle */ + +/* + * Root Hub Descriptor register bits + */ +#define ADMHC_RH_NUMP 0xff /* number of ports */ +#define ADMHC_RH_PSM (1 << 8) /* power switching mode */ +#define ADMHC_RH_NPS (1 << 9) /* no power switching */ +#define ADMHC_RH_OCPM (1 << 10) /* over current protection mode */ +#define ADMHC_RH_NOCP (1 << 11) /* no over current protection */ +#define ADMHC_RH_PPCM (0xff << 16) /* port power control */ + +#define ADMHC_RH_LPS (1 << 24) /* local power switch */ +#define ADMHC_RH_OCI (1 << 25) /* over current indicator */ + +/* status change bits */ +#define ADMHC_RH_LPSC (1 << 26) /* local power switch change */ +#define ADMHC_RH_OCIC (1 << 27) /* over current indicator change */ + +#define ADMHC_RH_DRWE (1 << 28) /* device remote wakeup enable */ +#define ADMHC_RH_CRWE (1 << 29) /* clear remote wakeup enable */ + +#define ADMHC_RH_CGP (1 << 24) /* clear global power */ +#define ADMHC_RH_SGP (1 << 26) /* set global power */ + +/* + * Port Status register bits + */ +#define ADMHC_PS_CCS (1 << 0) /* current connect status */ +#define ADMHC_PS_PES (1 << 1) /* port enable status */ +#define ADMHC_PS_PSS (1 << 2) /* port suspend status */ +#define ADMHC_PS_POCI (1 << 3) /* port over current indicator */ +#define ADMHC_PS_PRS (1 << 4) /* port reset status */ +#define ADMHC_PS_PPS (1 << 8) /* port power status */ +#define ADMHC_PS_LSDA (1 << 9) /* low speed device attached */ + +/* status change bits */ +#define ADMHC_PS_CSC (1 << 16) /* connect status change */ +#define ADMHC_PS_PESC (1 << 17) /* port enable status change */ +#define ADMHC_PS_PSSC (1 << 18) /* port suspend status change */ +#define ADMHC_PS_OCIC (1 << 19) /* over current indicator change */ +#define ADMHC_PS_PRSC (1 << 20) /* port reset status change */ + +/* port feature bits */ +#define ADMHC_PS_CPE (1 << 0) /* clear port enable */ +#define ADMHC_PS_SPE (1 << 1) /* set port enable */ +#define ADMHC_PS_SPS (1 << 2) /* set port suspend */ +#define ADMHC_PS_CPS (1 << 3) /* clear suspend status */ +#define ADMHC_PS_SPR (1 << 4) /* set port reset */ +#define ADMHC_PS_SPP (1 << 8) /* set port power */ +#define ADMHC_PS_CPP (1 << 9) /* clear port power */ + +/* + * the POTPGT value is not defined in the ADMHC, so define a dummy value + */ +#define ADMHC_POTPGT 2 /* in ms */ + +/* hcd-private per-urb state */ +struct urb_priv { + struct ed *ed; + struct list_head pending; /* URBs on the same ED */ + + u32 td_cnt; /* # tds in this request */ + u32 td_idx; /* index of the current td */ + struct td *td[0]; /* all TDs in this request */ +}; + +#define TD_HASH_SIZE 64 /* power'o'two */ +/* sizeof (struct td) ~= 64 == 2^6 ... */ +#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE) + +/* + * This is the full ADMHCD controller description + * + * Note how the "proper" USB information is just + * a subset of what the full implementation needs. (Linus) + */ + +struct admhcd { + spinlock_t lock; + + /* + * I/O memory used to communicate with the HC (dma-consistent) + */ + struct admhcd_regs __iomem *regs; + + /* + * hcd adds to schedule for a live hc any time, but removals finish + * only at the start of the next frame. + */ + + struct ed *ed_head; + struct ed *ed_tails[4]; + + struct ed *ed_rm_list; /* to be removed */ + + struct ed *periodic[NUM_INTS]; /* shadow int_table */ + +#if 0 /* TODO: remove? */ + /* + * OTG controllers and transceivers need software interaction; + * other external transceivers should be software-transparent + */ + struct otg_transceiver *transceiver; +#endif + + /* + * memory management for queue data structures + */ + struct dma_pool *td_cache; + struct dma_pool *ed_cache; + struct td *td_hash[TD_HASH_SIZE]; + struct list_head pending; + + /* + * driver state + */ + int num_ports; + int load[NUM_INTS]; + u32 host_control; /* copy of the host_control reg */ + unsigned long next_statechange; /* suspend/resume */ + u32 fminterval; /* saved register */ + unsigned autostop:1; /* rh auto stopping/stopped */ + + unsigned long flags; /* for HC bugs */ +#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */ +#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */ +#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */ +#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */ +#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ +#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ + // there are also chip quirks/bugs in init logic + +#ifdef DEBUG + struct dentry *debug_dir; + struct dentry *debug_async; + struct dentry *debug_periodic; + struct dentry *debug_registers; +#endif +}; + +/* convert between an hcd pointer and the corresponding ahcd_hcd */ +static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd) +{ + return (struct admhcd *)(hcd->hcd_priv); +} +static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd) +{ + return container_of((void *)ahcd, struct usb_hcd, hcd_priv); +} + +/*-------------------------------------------------------------------------*/ + +#ifndef DEBUG +#define STUB_DEBUG_FILES +#endif /* DEBUG */ + +#ifdef DEBUG +# define admhc_dbg(ahcd, fmt, args...) \ + printk(KERN_DEBUG "adm5120-hcd: " fmt , ## args ) +#else +# define admhc_dbg(ahcd, fmt, args...) do { } while (0) +#endif + +#define admhc_err(ahcd, fmt, args...) \ + printk(KERN_ERR "adm5120-hcd: " fmt , ## args ) +#define admhc_info(ahcd, fmt, args...) \ + printk(KERN_INFO "adm5120-hcd: " fmt , ## args ) +#define admhc_warn(ahcd, fmt, args...) \ + printk(KERN_WARNING "adm5120-hcd: " fmt , ## args ) + +#ifdef ADMHC_VERBOSE_DEBUG +# define admhc_vdbg admhc_dbg +#else +# define admhc_vdbg(ahcd, fmt, args...) do { } while (0) +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * While most USB host controllers implement their registers and + * in-memory communication descriptors in little-endian format, + * a minority (notably the IBM STB04XXX and the Motorola MPC5200 + * processors) implement them in big endian format. + * + * In addition some more exotic implementations like the Toshiba + * Spider (aka SCC) cell southbridge are "mixed" endian, that is, + * they have a different endianness for registers vs. in-memory + * descriptors. + * + * This attempts to support either format at compile time without a + * runtime penalty, or both formats with the additional overhead + * of checking a flag bit. + * + * That leads to some tricky Kconfig rules howevber. There are + * different defaults based on some arch/ppc platforms, though + * the basic rules are: + * + * Controller type Kconfig options needed + * --------------- ---------------------- + * little endian CONFIG_USB_ADMHC_LITTLE_ENDIAN + * + * fully big endian CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_ + * CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO + * + * mixed endian CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_ + * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC} + * + * (If you have a mixed endian controller, you -must- also define + * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building + * both your mixed endian and a fully big endian controller support in + * the same kernel image). + */ + +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC +#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN +#define big_endian_desc(ahcd) (ahcd->flags & OHCI_QUIRK_BE_DESC) +#else +#define big_endian_desc(ahcd) 1 /* only big endian */ +#endif +#else +#define big_endian_desc(ahcd) 0 /* only little endian */ +#endif + +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO +#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN +#define big_endian_mmio(ahcd) (ahcd->flags & OHCI_QUIRK_BE_MMIO) +#else +#define big_endian_mmio(ahcd) 1 /* only big endian */ +#endif +#else +#define big_endian_mmio(ahcd) 0 /* only little endian */ +#endif + +/* + * Big-endian read/write functions are arch-specific. + * Other arches can be added if/when they're needed. + * + * REVISIT: arch/powerpc now has readl/writel_be, so the + * definition below can die once the STB04xxx support is + * finally ported over. + */ +#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE) +#define readl_be(addr) in_be32((__force unsigned *)addr) +#define writel_be(val, addr) out_be32((__force unsigned *)addr, val) +#endif + +static inline unsigned int admhc_readl(const struct admhcd *ahcd, + __hc32 __iomem *regs) +{ +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO + return big_endian_mmio(ahcd) ? + readl_be(regs) : + readl(regs); +#else + return readl(regs); +#endif +} + +static inline void admhc_writel(const struct admhcd *ahcd, + const unsigned int val, __hc32 __iomem *regs) +{ +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO + big_endian_mmio(ahcd) ? + writel_be(val, regs) : + writel(val, regs); +#else + writel(val, regs); +#endif +} + +static inline void admhc_writel_flush(const struct admhcd *ahcd) +{ +#if 0 + /* TODO: remove? */ + (void) admhc_readl(ahcd, &ahcd->regs->gencontrol); +#endif +} + + +/*-------------------------------------------------------------------------*/ + +/* cpu to ahcd */ +static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x) +{ + return big_endian_desc(ahcd) ? + (__force __hc16)cpu_to_be16(x) : + (__force __hc16)cpu_to_le16(x); +} + +static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x) +{ + return big_endian_desc(ahcd) ? + cpu_to_be16p(x) : + cpu_to_le16p(x); +} + +static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x) +{ + return big_endian_desc(ahcd) ? + (__force __hc32)cpu_to_be32(x) : + (__force __hc32)cpu_to_le32(x); +} + +static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x) +{ + return big_endian_desc(ahcd) ? + cpu_to_be32p(x) : + cpu_to_le32p(x); +} + +/* ahcd to cpu */ +static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x) +{ + return big_endian_desc(ahcd) ? + be16_to_cpu((__force __be16)x) : + le16_to_cpu((__force __le16)x); +} + +static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x) +{ + return big_endian_desc(ahcd) ? + be16_to_cpup((__force __be16 *)x) : + le16_to_cpup((__force __le16 *)x); +} + +static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x) +{ + return big_endian_desc(ahcd) ? + be32_to_cpu((__force __be32)x) : + le32_to_cpu((__force __le32)x); +} + +static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x) +{ + return big_endian_desc(ahcd) ? + be32_to_cpup((__force __be32 *)x) : + le32_to_cpup((__force __le32 *)x); +} + +/*-------------------------------------------------------------------------*/ + +static inline u16 admhc_frame_no(const struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK; + return (u16)t; +} + +static inline u16 admhc_frame_remain(const struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT; + t &= ADMHC_SFN_FR_MASK; + return (u16)t; +} + +/*-------------------------------------------------------------------------*/ + +static inline void admhc_disable(struct admhcd *ahcd) +{ + admhcd_to_hcd(ahcd)->state = HC_STATE_HALT; +} + +#define FI 0x2edf /* 12000 bits per frame (-1) */ +#define FSLDP(fi) (0x7fff & ((6 * ((fi) - 1200)) / 7)) +#define FIT ADMHC_SFI_FIT +#define LSTHRESH 0x628 /* lowspeed bit threshold */ + +static inline void periodic_reinit(struct admhcd *ahcd) +{ +#if 0 + u32 fi = ahcd->fminterval & ADMHC_SFI_FI_MASK; + u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT; + + /* TODO: adjust FSLargestDataPacket value too? */ + admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval, + &ahcd->regs->fminterval); +#else + u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT; + + /* TODO: adjust FSLargestDataPacket value too? */ + admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval, + &ahcd->regs->fminterval); +#endif +} + +static inline u32 admhc_read_rhdesc(struct admhcd *ahcd) +{ + return admhc_readl(ahcd, &ahcd->regs->rhdesc); +} + +static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port) +{ + return admhc_readl(ahcd, &ahcd->regs->portstatus[port]); +} + +static inline void admhc_write_portstatus(struct admhcd *ahcd, int port, + u32 value) +{ + admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]); +} + +static inline void roothub_write_status(struct admhcd *ahcd, u32 value) +{ + /* FIXME: read-only bits must be masked out */ + admhc_writel(ahcd, value, &ahcd->regs->rhdesc); +} + +static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->int_enable); + t &= ~(ints); + admhc_writel(ahcd, t, &ahcd->regs->int_enable); + /* TODO: flush writes ?*/ +} + +static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->int_enable); + t |= ints; + admhc_writel(ahcd, t, &ahcd->regs->int_enable); + /* TODO: flush writes ?*/ +} + +static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints) +{ + admhc_writel(ahcd, ints, &ahcd->regs->int_status); +} + +static inline void admhc_dma_enable(struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->host_control); + if (t & ADMHC_HC_DMAE) + return; + + t |= ADMHC_HC_DMAE; + admhc_writel(ahcd, t, &ahcd->regs->host_control); + admhc_vdbg(ahcd,"DMA enabled\n"); +} + +static inline void admhc_dma_disable(struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->host_control); + if (!(t & ADMHC_HC_DMAE)) + return; + + t &= ~ADMHC_HC_DMAE; + admhc_writel(ahcd, t, &ahcd->regs->host_control); + admhc_vdbg(ahcd,"DMA disabled\n"); +} |