2 files changed, 169 insertions, 0 deletions
diff --git a/package/zram-swap/Makefile b/package/zram-swap/Makefile
new file mode 100644
index 000000000..59a55c477
--- /dev/null
+++ b/package/zram-swap/Makefile
@@ -0,0 +1,46 @@
+# 
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=zram-swap
+PKG_VERSION:=1
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/zram-swap
+  SECTION:=utils
+  CATEGORY:=Base system
+  DEPENDS:=+kmod-zram +!(BUSYBOX_CONFIG_MKSWAP&&BUSYBOX_CONFIG_SWAPONOFF):swap-utils
+  TITLE:=ZRAM swap scripts
+  PKGARCH:=all
+endef
+
+define Package/zram-swap/description
+ A script to activate swaping on a compressed zram partition. This 
+ could be used to increase the available memory, by using compressed 
+ memory.
+endef
+
+define Build/Prepare
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define Package/zram-swap/install
+	$(INSTALL_DIR) $(1)
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,zram-swap))
diff --git a/package/zram-swap/files/etc/init.d/zram b/package/zram-swap/files/etc/init.d/zram
new file mode 100644
index 000000000..23de915c8
--- /dev/null
+++ b/package/zram-swap/files/etc/init.d/zram
@@ -0,0 +1,123 @@
+#!/bin/sh /etc/rc.common
+
+START=15
+
+ram_size()
+{
+	local line
+
+	while read line; do case "$line" in MemTotal:*) set $line; echo "$2"; break ;; esac; done </proc/meminfo
+}
+
+zram_size()	# in megabytes
+{
+	local zram_size="$( uci -q get system.@system[0].zram_size_mb )"
+	local ram_size="$( ram_size )"
+
+	if [ -z "$zram_size" ]; then
+		# e.g. 6mb for 16mb-routers or 61mb for 128mb-routers
+		echo $(( $ram_size / 2048 ))
+	else
+		echo "$zram_size"
+	fi
+}
+
+zram_applicable()
+{
+	local zram_dev="$1"
+
+	grep -sq ^"$zram_dev " /proc/swaps && {
+		logger -s -t zram_applicable -p daemon.notice "[OK] '$zram_dev' already active"
+		return 1
+	}
+
+	[ -e "$zram_dev" ] || {
+		logger -s -t zram_applicable -p daemon.crit "[ERROR] device '$zram_dev' not found"
+		return 1
+	}
+
+	which mkswap >/dev/null || {
+		logger -s -t zram_applicable -p daemon.err "[ERROR] 'mkswap' not installed"
+		return 1
+	}
+
+	which swapon >/dev/null || {
+		logger -s -t zram_applicable -p daemon.err "[ERROR] 'swapon' not installed"
+		return 1
+	}
+
+	which swapoff >/dev/null || {
+		logger -s -t zram_applicable -p daemon.err "[ERROR] 'swapoff' not installed"
+		return 1
+	}
+}
+
+zram_dev()
+{
+	local core="$1"
+
+	echo "/dev/zram${core:-0}"
+}
+
+zram_reset()
+{
+	local dev="$1"
+	local message="$2"
+	local proc_entry="/sys/block/$( basename "$dev" )/reset"
+
+	logger -s -t zram_reset -p daemon.debug "$message via $proc_entry"
+	echo "1" >"$proc_entry"
+}
+
+list_cpu_idx()
+{
+	local line i=0
+
+	while read line; do {
+		case "$line" in
+			[Pp]rocessor*)
+				echo $i
+				i=$(( $i + 1 ))
+			;;
+		esac
+	} done <"/proc/cpuinfo"
+}
+
+start()
+{
+	# http://shmilyxbq-compcache.googlecode.com/hg/README
+	# if >1 cpu_core, reinit kmodule with e.g. num_devices=4
+
+	local zram_size="$( zram_size )"
+	local zram_dev core
+
+	for core in $( list_cpu_idx ); do {
+		zram_dev="$( zram_dev "$core" )"
+		zram_applicable "$zram_dev" || return 1
+
+		logger -s -t zram_start -p daemon.debug "activating '$zram_dev' for swapping ($zram_size MegaBytes)"
+
+		zram_reset "$zram_dev" "enforcing defaults"
+		echo $(( $zram_size * 1024 * 1024 )) >"/sys/block/$( basename $zram_dev )/disksize"
+		mkswap "$zram_dev"
+		swapon "$zram_dev"
+	} done
+}
+
+stop()
+{
+	local zram_dev proc_entry
+
+	for core in $( list_cpu_idx ); do {
+		zram_dev="$( zram_dev "$core" )"
+		proc_entry="/sys/block/$( basename "$zram_dev" )/reset"
+
+		grep -sq ^"$zram_dev " /proc/swaps && {
+			logger -s -t zram_stop -p daemon.debug "deactivate swap $zram_dev"
+			swapoff "$zram_dev"
+		}
+
+		zram_reset "$zram_dev" "claiming memory back"
+	} done
+}
+