diff options
Diffstat (limited to 'package/network/services')
10 files changed, 927 insertions, 0 deletions
diff --git a/package/network/services/openvpn/Config-nossl.in b/package/network/services/openvpn/Config-nossl.in new file mode 100644 index 000000000..98cba25cc --- /dev/null +++ b/package/network/services/openvpn/Config-nossl.in @@ -0,0 +1,47 @@ +if PACKAGE_openvpn-nossl + +config OPENVPN_nossl_ENABLE_LZO + bool "Enable LZO compression support" + default y + +config OPENVPN_nossl_ENABLE_SERVER + bool "Enable server support (otherwise only client mode is support)" + default y + +config OPENVPN_nossl_ENABLE_MANAGEMENT + bool "Enable management server support" + default n + +config OPENVPN_nossl_ENABLE_HTTP + bool "Enable HTTP proxy support" + default y + +config OPENVPN_nossl_ENABLE_SOCKS + bool "Enable SOCKS proxy support" + default y + +config OPENVPN_nossl_ENABLE_FRAGMENT + bool "Enable internal fragmentation support (--fragment)" + default y + +config OPENVPN_nossl_ENABLE_MULTIHOME + bool "Enable multi-homed UDP server support (--multihome)" + default y + +config OPENVPN_nossl_ENABLE_PORT_SHARE + bool "Enable TCP server port-share support (--port-share)" + default y + +config OPENVPN_nossl_ENABLE_DEF_AUTH + bool "Enable deferred authentication" + default y + +config OPENVPN_nossl_ENABLE_PF + bool "Enable internal packet filter" + default y + +config OPENVPN_nossl_ENABLE_IPROUTE2 + bool "Enable support for iproute2" + default n + +endif diff --git a/package/network/services/openvpn/Config-openssl.in b/package/network/services/openvpn/Config-openssl.in new file mode 100644 index 000000000..66861219d --- /dev/null +++ b/package/network/services/openvpn/Config-openssl.in @@ -0,0 +1,59 @@ +if PACKAGE_openvpn-openssl + +config OPENVPN_openssl_ENABLE_LZO + bool "Enable LZO compression support" + default y + +config OPENVPN_openssl_ENABLE_X509_ALT_USERNAME + bool "Enable the --x509-username-field feature" + default n + +config OPENVPN_openssl_ENABLE_SERVER + bool "Enable server support (otherwise only client mode is support)" + default y + +#config OPENVPN_openssl_ENABLE_EUREPHIA +# bool "Enable support for the eurephia plug-in" +# default n + +config OPENVPN_openssl_ENABLE_MANAGEMENT + bool "Enable management server support" + default n + +#config OPENVPN_openssl_ENABLE_PKCS11 +# bool "Enable pkcs11 support" +# default n + +config OPENVPN_openssl_ENABLE_HTTP + bool "Enable HTTP proxy support" + default y + +config OPENVPN_openssl_ENABLE_SOCKS + bool "Enable SOCKS proxy support" + default y + +config OPENVPN_openssl_ENABLE_FRAGMENT + bool "Enable internal fragmentation support (--fragment)" + default y + +config OPENVPN_openssl_ENABLE_MULTIHOME + bool "Enable multi-homed UDP server support (--multihome)" + default y + +config OPENVPN_openssl_ENABLE_PORT_SHARE + bool "Enable TCP server port-share support (--port-share)" + default y + +config OPENVPN_openssl_ENABLE_DEF_AUTH + bool "Enable deferred authentication" + default y + +config OPENVPN_openssl_ENABLE_PF + bool "Enable internal packet filter" + default y + +config OPENVPN_openssl_ENABLE_IPROUTE2 + bool "Enable support for iproute2" + default n + +endif diff --git a/package/network/services/openvpn/Config-polarssl.in b/package/network/services/openvpn/Config-polarssl.in new file mode 100644 index 000000000..64c449724 --- /dev/null +++ b/package/network/services/openvpn/Config-polarssl.in @@ -0,0 +1,59 @@ +if PACKAGE_openvpn-polarssl + +config OPENVPN_polarssl_ENABLE_LZO + bool "Enable LZO compression support" + default y + +config OPENVPN_polarssl_ENABLE_X509_ALT_USERNAME + bool "Enable the --x509-username-field feature" + default n + +config OPENVPN_polarssl_ENABLE_SERVER + bool "Enable server support (otherwise only client mode is support)" + default y + +#config OPENVPN_polarssl_ENABLE_EUREPHIA +# bool "Enable support for the eurephia plug-in" +# default n + +config OPENVPN_polarssl_ENABLE_MANAGEMENT + bool "Enable management server support" + default n + +#config OPENVPN_polarssl_ENABLE_PKCS11 +# bool "Enable pkcs11 support" +# default n + +config OPENVPN_polarssl_ENABLE_HTTP + bool "Enable HTTP proxy support" + default y + +config OPENVPN_polarssl_ENABLE_SOCKS + bool "Enable SOCKS proxy support" + default y + +config OPENVPN_polarssl_ENABLE_FRAGMENT + bool "Enable internal fragmentation support (--fragment)" + default y + +config OPENVPN_polarssl_ENABLE_MULTIHOME + bool "Enable multi-homed UDP server support (--multihome)" + default y + +config OPENVPN_polarssl_ENABLE_PORT_SHARE + bool "Enable TCP server port-share support (--port-share)" + default y + +config OPENVPN_polarssl_ENABLE_DEF_AUTH + bool "Enable deferred authentication" + default y + +config OPENVPN_polarssl_ENABLE_PF + bool "Enable internal packet filter" + default y + +config OPENVPN_polarssl_ENABLE_IPROUTE2 + bool "Enable support for iproute2" + default n + +endif diff --git a/package/network/services/openvpn/Makefile b/package/network/services/openvpn/Makefile new file mode 100644 index 000000000..bba25cd45 --- /dev/null +++ b/package/network/services/openvpn/Makefile @@ -0,0 +1,148 @@ +# +# Copyright (C) 2010-2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=openvpn + +PKG_REV:=56cffde5d5320e0b1ec364d3e486aca9 +PKG_VERSION:=2.3.0 +PKG_RELEASE=1 + +PKG_SOURCE_URL:=http://swupdate.openvpn.net/community/releases +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) + +PKG_INSTALL:=1 +PKG_FIXUP:=autoreconf +PKG_BUILD_PARALLEL:=1 + +include $(INCLUDE_DIR)/package.mk + +define Package/openvpn/Default + TITLE:=Open source VPN solution using $(2) + SECTION:=net + CATEGORY:=Network + URL:=http://openvpn.net + SUBMENU:=VPN + MENU:=1 + DEPENDS:=+kmod-tun +OPENVPN_$(1)_ENABLE_LZO:liblzo +OPENVPN_$(1)_ENABLE_IPROUTE2:ip $(3) + VARIANT:=$(1) + MAINTAINER:=Mirko Vogt <mirko@openwrt.org> +endef + +Package/openvpn-openssl=$(call Package/openvpn/Default,openssl,OpenSSL,+libopenssl) +Package/openvpn-polarssl=$(call Package/openvpn/Default,polarssl,PolarSSL,+libpolarssl) +Package/openvpn-nossl=$(call Package/openvpn/Default,nossl,plaintext (no SSL)) + +define Package/openvpn/config/Default + source "$(SOURCE)/Config-$(1).in" +endef + +Package/openvpn-openssl/config=$(call Package/openvpn/config/Default,openssl) +Package/openvpn-polarssl/config=$(call Package/openvpn/config/Default,polarssl) +Package/openvpn-nossl/config=$(call Package/openvpn/config/Default,nossl) + +define Package/openvpn-easy-rsa + $(call Package/openvpn) + DEPENDS:=+openssl-util + TITLE:=Simple shell scripts to manage a Certificate Authority +endef + +define Package/openvpn-easy-rsa/conffiles +/etc/easy-rsa/keys/serial +/etc/easy-rsa/keys/index.txt +/etc/easy-rsa/vars +endef + + +ifeq ($(BUILD_VARIANT),polarssl) +CONFIG_OPENVPN_POLARSSL:=y +endif +ifeq ($(BUILD_VARIANT),openssl) +CONFIG_OPENVPN_OPENSSL:=y +endif +ifeq ($(BUILD_VARIANT),nossl) +CONFIG_OPENVPN_NOSSL:=y +endif + +CONFIGURE_VARS += \ + IFCONFIG=/sbin/ifconfig \ + ROUTE=/sbin/route \ + IPROUTE=/usr/sbin/ip \ + NETSTAT=/sbin/netstat + +define Build/Configure + $(call Build/Configure/Default, \ + --enable-small \ + --disable-selinux \ + --disable-systemd \ + --disable-plugins \ + --disable-debug \ + --disable-eurephia \ + --disable-pkcs11 \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_LZO),--enable,--disable)-lzo \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_X509_ALT_USERNAME),enable,disable-x509-alt-username)-ssl \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_SERVER),--enable,--disable)-server \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_MANAGEMENT),--enable,--disable)-management \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_SOCKS),--enable,--disable)-socks \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_HTTP),--enable,--disable)-http \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_FRAGMENT),--enable,--disable)-fragment \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_MULTIHOME),--enable,--disable)-multihome \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_IPROUTE2),--enable,--disable)-iproute2 \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_DEF_AUTH),--enable,--disable)-def-auth \ + $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_PF),--enable,--disable)-pf \ + $(if $(CONFIG_OPENVPN_NOSSL),--disable-ssl --disable-crypto,--enable-ssl --enable-crypto) \ + $(if $(CONFIG_OPENVPN_OPENSSL),--with-crypto-library=openssl) \ + $(if $(CONFIG_OPENVPN_POLARSSL),--with-crypto-library=polarssl) \ + ) +endef + +define Package/openvpn-$(BUILD_VARIANT)/conffiles +/etc/config/openvpn +endef + +define Package/openvpn-$(BUILD_VARIANT)/install + $(INSTALL_DIR) \ + $(1)/usr/sbin \ + $(1)/etc/init.d \ + $(1)/etc/config \ + $(1)/etc/openvpn \ + $(1)/lib/upgrade/keep.d + + $(INSTALL_BIN) \ + $(PKG_INSTALL_DIR)/usr/sbin/openvpn \ + $(1)/usr/sbin/ + + $(INSTALL_BIN) \ + files/openvpn.init \ + $(1)/etc/init.d/openvpn + + $(INSTALL_CONF) files/openvpn.config \ + $(1)/etc/config/openvpn + + $(INSTALL_DATA) \ + files/openvpn.upgrade \ + $(1)/lib/upgrade/keep.d/openvpn +endef + +define Package/openvpn-easy-rsa/install + $(INSTALL_DIR) $(1)/usr/sbin + $(CP) $(PKG_BUILD_DIR)/easy-rsa/2.0/{build-*,clean-all,inherit-inter,list-crl,pkitool,revoke-full,sign-req,whichopensslcnf} $(1)/usr/sbin/ + $(INSTALL_DIR) $(1)/etc/easy-rsa + $(INSTALL_DATA) $(PKG_BUILD_DIR)/easy-rsa/2.0/openssl-1.0.0.cnf $(1)/etc/easy-rsa/openssl-1.0.0.cnf + $(INSTALL_DATA) $(PKG_BUILD_DIR)/easy-rsa/2.0/vars $(1)/etc/easy-rsa/vars + $(INSTALL_DIR) $(1)/etc/easy-rsa/keys + $(INSTALL_DATA) files/easy-rsa.index $(1)/etc/easy-rsa/keys/index.txt + $(INSTALL_DATA) files/easy-rsa.serial $(1)/etc/easy-rsa/keys/serial +endef + +$(eval $(call BuildPackage,openvpn-openssl)) +$(eval $(call BuildPackage,openvpn-polarssl)) +$(eval $(call BuildPackage,openvpn-nossl)) +$(eval $(call BuildPackage,openvpn-easy-rsa)) diff --git a/package/network/services/openvpn/files/easy-rsa.index b/package/network/services/openvpn/files/easy-rsa.index new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/package/network/services/openvpn/files/easy-rsa.index diff --git a/package/network/services/openvpn/files/easy-rsa.serial b/package/network/services/openvpn/files/easy-rsa.serial new file mode 100644 index 000000000..8a0f05e16 --- /dev/null +++ b/package/network/services/openvpn/files/easy-rsa.serial @@ -0,0 +1 @@ +01 diff --git a/package/network/services/openvpn/files/openvpn.config b/package/network/services/openvpn/files/openvpn.config new file mode 100644 index 000000000..4a1f66733 --- /dev/null +++ b/package/network/services/openvpn/files/openvpn.config @@ -0,0 +1,398 @@ +package openvpn + +################################################# +# Sample to include a custom config file. # +################################################# + +config openvpn custom_config + + # Set to 1 to enable this instance: + option enabled 0 + + # Include OpenVPN configuration + option config /etc/openvpn/my-vpn.conf + + +################################################# +# Sample OpenVPN 2.0 uci config for # +# multi-client server. # +################################################# + +config openvpn sample_server + + # Set to 1 to enable this instance: + option enabled 0 + + # Which local IP address should OpenVPN + # listen on? (optional) +# option local 0.0.0.0 + + # Which TCP/UDP port should OpenVPN listen on? + # If you want to run multiple OpenVPN instances + # on the same machine, use a different port + # number for each one. You will need to + # open up this port on your firewall. + option port 1194 + + # TCP or UDP server? +# option proto tcp + option proto udp + + # "dev tun" will create a routed IP tunnel, + # "dev tap" will create an ethernet tunnel. + # Use "dev tap0" if you are ethernet bridging + # and have precreated a tap0 virtual interface + # and bridged it with your ethernet interface. + # If you want to control access policies + # over the VPN, you must create firewall + # rules for the the TUN/TAP interface. + # On non-Windows systems, you can give + # an explicit unit number, such as tun0. + # On Windows, use "dev-node" for this. + # On most systems, the VPN will not function + # unless you partially or fully disable + # the firewall for the TUN/TAP interface. +# option dev tap + option dev tun + + # SSL/TLS root certificate (ca), certificate + # (cert), and private key (key). Each client + # and the server must have their own cert and + # key file. The server and all clients will + # use the same ca file. + # + # See the "easy-rsa" directory for a series + # of scripts for generating RSA certificates + # and private keys. Remember to use + # a unique Common Name for the server + # and each of the client certificates. + # + # Any X509 key management system can be used. + # OpenVPN can also use a PKCS #12 formatted key file + # (see "pkcs12" directive in man page). + option ca /etc/openvpn/ca.crt + option cert /etc/openvpn/server.crt + # This file should be kept secret: + option key /etc/openvpn/server.key + + # Diffie hellman parameters. + # Generate your own with: + # openssl dhparam -out dh1024.pem 1024 + # Substitute 2048 for 1024 if you are using + # 2048 bit keys. + option dh /etc/openvpn/dh1024.pem + + # Configure server mode and supply a VPN subnet + # for OpenVPN to draw client addresses from. + # The server will take 10.8.0.1 for itself, + # the rest will be made available to clients. + # Each client will be able to reach the server + # on 10.8.0.1. Comment this line out if you are + # ethernet bridging. See the man page for more info. + option server "10.8.0.0 255.255.255.0" + + # Maintain a record of client <-> virtual IP address + # associations in this file. If OpenVPN goes down or + # is restarted, reconnecting clients can be assigned + # the same virtual IP address from the pool that was + # previously assigned. + option ifconfig_pool_persist /tmp/ipp.txt + + # Configure server mode for ethernet bridging. + # You must first use your OS's bridging capability + # to bridge the TAP interface with the ethernet + # NIC interface. Then you must manually set the + # IP/netmask on the bridge interface, here we + # assume 10.8.0.4/255.255.255.0. Finally we + # must set aside an IP range in this subnet + # (start=10.8.0.50 end=10.8.0.100) to allocate + # to connecting clients. Leave this line commented + # out unless you are ethernet bridging. +# option server_bridge "10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100" + + # Push routes to the client to allow it + # to reach other private subnets behind + # the server. Remember that these + # private subnets will also need + # to know to route the OpenVPN client + # address pool (10.8.0.0/255.255.255.0) + # back to the OpenVPN server. +# list push "route 192.168.10.0 255.255.255.0" +# list push "route 192.168.20.0 255.255.255.0" + + # To assign specific IP addresses to specific + # clients or if a connecting client has a private + # subnet behind it that should also have VPN access, + # use the subdirectory "ccd" for client-specific + # configuration files (see man page for more info). + + # EXAMPLE: Suppose the client + # having the certificate common name "Thelonious" + # also has a small subnet behind his connecting + # machine, such as 192.168.40.128/255.255.255.248. + # First, uncomment out these lines: +# option client_config_dir /etc/openvpn/ccd +# list route "192.168.40.128 255.255.255.248" + # Then create a file ccd/Thelonious with this line: + # iroute 192.168.40.128 255.255.255.248 + # This will allow Thelonious' private subnet to + # access the VPN. This example will only work + # if you are routing, not bridging, i.e. you are + # using "dev tun" and "server" directives. + + # EXAMPLE: Suppose you want to give + # Thelonious a fixed VPN IP address of 10.9.0.1. + # First uncomment out these lines: +# option client_config_dir /etc/openvpn/ccd +# list route "10.9.0.0 255.255.255.252" +# list route "192.168.100.0 255.255.255.0" + # Then add this line to ccd/Thelonious: + # ifconfig-push "10.9.0.1 10.9.0.2" + + # Suppose that you want to enable different + # firewall access policies for different groups + # of clients. There are two methods: + # (1) Run multiple OpenVPN daemons, one for each + # group, and firewall the TUN/TAP interface + # for each group/daemon appropriately. + # (2) (Advanced) Create a script to dynamically + # modify the firewall in response to access + # from different clients. See man + # page for more info on learn-address script. +# option learn_address /etc/openvpn/script + + # If enabled, this directive will configure + # all clients to redirect their default + # network gateway through the VPN, causing + # all IP traffic such as web browsing and + # and DNS lookups to go through the VPN + # (The OpenVPN server machine may need to NAT + # the TUN/TAP interface to the internet in + # order for this to work properly). + # CAVEAT: May break client's network config if + # client's local DHCP server packets get routed + # through the tunnel. Solution: make sure + # client's local DHCP server is reachable via + # a more specific route than the default route + # of 0.0.0.0/0.0.0.0. +# list push "redirect-gateway" + + # Certain Windows-specific network settings + # can be pushed to clients, such as DNS + # or WINS server addresses. CAVEAT: + # http://openvpn.net/faq.html#dhcpcaveats +# list push "dhcp-option DNS 10.8.0.1" +# list push "dhcp-option WINS 10.8.0.1" + + # Uncomment this directive to allow different + # clients to be able to "see" each other. + # By default, clients will only see the server. + # To force clients to only see the server, you + # will also need to appropriately firewall the + # server's TUN/TAP interface. +# option client_to_client 1 + + # Uncomment this directive if multiple clients + # might connect with the same certificate/key + # files or common names. This is recommended + # only for testing purposes. For production use, + # each client should have its own certificate/key + # pair. + # + # IF YOU HAVE NOT GENERATED INDIVIDUAL + # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, + # EACH HAVING ITS OWN UNIQUE "COMMON NAME", + # UNCOMMENT THIS LINE OUT. +# option duplicate_cn 1 + + # The keepalive directive causes ping-like + # messages to be sent back and forth over + # the link so that each side knows when + # the other side has gone down. + # Ping every 10 seconds, assume that remote + # peer is down if no ping received during + # a 120 second time period. + option keepalive "10 120" + + # For extra security beyond that provided + # by SSL/TLS, create an "HMAC firewall" + # to help block DoS attacks and UDP port flooding. + # + # Generate with: + # openvpn --genkey --secret ta.key + # + # The server and each client must have + # a copy of this key. + # The second parameter should be '0' + # on the server and '1' on the clients. + # This file is secret: +# option tls_auth "/etc/openvpn/ta.key 0" + + # Select a cryptographic cipher. + # This config item must be copied to + # the client config file as well. + # Blowfish (default): +# option cipher BF-CBC + # AES: +# option cipher AES-128-CBC + # Triple-DES: +# option cipher DES-EDE3-CBC + + # Enable compression on the VPN link. + # If you enable it here, you must also + # enable it in the client config file. + option comp_lzo 1 + + # The maximum number of concurrently connected + # clients we want to allow. +# option max_clients 100 + + # The persist options will try to avoid + # accessing certain resources on restart + # that may no longer be accessible because + # of the privilege downgrade. + option persist_key 1 + option persist_tun 1 + + # Output a short status file showing + # current connections, truncated + # and rewritten every minute. + option status /tmp/openvpn-status.log + + # By default, log messages will go to the syslog (or + # on Windows, if running as a service, they will go to + # the "\Program Files\OpenVPN\log" directory). + # Use log or log-append to override this default. + # "log" will truncate the log file on OpenVPN startup, + # while "log-append" will append to it. Use one + # or the other (but not both). +# option log /tmp/openvpn.log +# option log_append /tmp/openvpn.log + + # Set the appropriate level of log + # file verbosity. + # + # 0 is silent, except for fatal errors + # 4 is reasonable for general usage + # 5 and 6 can help to debug connection problems + # 9 is extremely verbose + option verb 3 + + # Silence repeating messages. At most 20 + # sequential messages of the same message + # category will be output to the log. +# option mute 20 + + +############################################## +# Sample client-side OpenVPN 2.0 uci config # +# for connecting to multi-client server. # +############################################## + +config openvpn sample_client + + # Set to 1 to enable this instance: + option enabled 0 + + # Specify that we are a client and that we + # will be pulling certain config file directives + # from the server. + option client 1 + + # Use the same setting as you are using on + # the server. + # On most systems, the VPN will not function + # unless you partially or fully disable + # the firewall for the TUN/TAP interface. +# option dev tap + option dev tun + + # Are we connecting to a TCP or + # UDP server? Use the same setting as + # on the server. +# option proto tcp + option proto udp + + # The hostname/IP and port of the server. + # You can have multiple remote entries + # to load balance between the servers. + list remote "my_server_1 1194" +# list remote "my_server_2 1194" + + # Choose a random host from the remote + # list for load_balancing. Otherwise + # try hosts in the order specified. +# option remote_random 1 + + # Keep trying indefinitely to resolve the + # host name of the OpenVPN server. Very useful + # on machines which are not permanently connected + # to the internet such as laptops. + option resolv_retry infinite + + # Most clients don't need to bind to + # a specific local port number. + option nobind 1 + + # Try to preserve some state across restarts. + option persist_key 1 + option persist_tun 1 + + # If you are connecting through an + # HTTP proxy to reach the actual OpenVPN + # server, put the proxy server/IP and + # port number here. See the man page + # if your proxy server requires + # authentication. + # retry on connection failures: +# option http_proxy_retry 1 + # specify http proxy address and port: +# option http_proxy "192.168.1.100 8080" + + # Wireless networks often produce a lot + # of duplicate packets. Set this flag + # to silence duplicate packet warnings. +# option mute_replay_warnings 1 + + # SSL/TLS parms. + # See the server config file for more + # description. It's best to use + # a separate .crt/.key file pair + # for each client. A single ca + # file can be used for all clients. + option ca /etc/openvpn/ca.crt + option cert /etc/openvpn/client.crt + option key /etc/openvpn/client.key + + # Verify server certificate by checking + # that the certicate has the nsCertType + # field set to "server". This is an + # important precaution to protect against + # a potential attack discussed here: + # http://openvpn.net/howto.html#mitm + # + # To use this feature, you will need to generate + # your server certificates with the nsCertType + # field set to "server". The build_key_server + # script in the easy_rsa folder will do this. +# option ns_cert_type server + + # If a tls_auth key is used on the server + # then every client must also have the key. +# option tls_auth "/etc/openvpn/ta.key 1" + + # Select a cryptographic cipher. + # If the cipher option is used on the server + # then you must also specify it here. +# option cipher x + + # Enable compression on the VPN link. + # Don't enable this unless it is also + # enabled in the server config file. + option comp_lzo 1 + + # Set log file verbosity. + option verb 3 + + # Silence repeating messages +# option mute 20 diff --git a/package/network/services/openvpn/files/openvpn.init b/package/network/services/openvpn/files/openvpn.init new file mode 100644 index 000000000..c58f005f3 --- /dev/null +++ b/package/network/services/openvpn/files/openvpn.init @@ -0,0 +1,154 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2008-2011 OpenWrt.org +# Copyright (C) 2008 Jo-Philipp Wich +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. + +START=95 + +SERVICE_DAEMONIZE=1 +SERVICE_WRITE_PID=1 + +EXTRA_COMMANDS="up down" + +LIST_SEP=" +" + +append_param() { + local v="$1" + case "$v" in + *_*_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;; + *_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;; + *_*) v=${v%%_*}-${v#*_} ;; + esac + ARGS="$ARGS --$v" + return 0 +} + +append_bools() { + local p; local v; local s="$1"; shift + for p in $*; do + config_get_bool v "$s" "$p" + [ "$v" == 1 ] && append_param "$p" + done +} + +append_params() { + local p; local v; local s="$1"; shift + for p in $*; do + config_get v "$s" "$p" + IFS="$LIST_SEP" + for v in $v; do + [ -n "$v" ] && append_param "$p" && ARGS="$ARGS $v" + done + unset IFS + done +} + +section_enabled() { + config_get_bool enable "$1" 'enable' 0 + config_get_bool enabled "$1" 'enabled' 0 + [ $enable -gt 0 ] || [ $enabled -gt 0 ] +} + +start_instance() { + local s="$1" + + section_enabled "$s" || return 1 + + ARGS="" + + # append flags + append_bools "$s" \ + auth_nocache auth_retry auth_user_pass_optional bind ccd_exclusive client client_cert_not_required \ + client_to_client comp_lzo comp_noadapt disable \ + disable_occ down_pre duplicate_cn fast_io float http_proxy_retry \ + ifconfig_noexec ifconfig_nowarn ifconfig_pool_linear management_forget_disconnect management_hold \ + management_query_passwords management_signal mktun mlock mtu_test multihome mute_replay_warnings \ + nobind no_iv no_name_remapping no_replay opt_verify passtos persist_key persist_local_ip \ + persist_remote_ip persist_tun ping_timer_rem pull push_reset \ + remote_random rmtun route_noexec route_nopull single_session socks_proxy_retry \ + suppress_timestamps tcp_nodelay test_crypto tls_client tls_exit tls_server \ + tun_ipv6 up_delay up_restart username_as_common_name + + # append params + append_params "$s" \ + cd askpass auth auth_user_pass auth_user_pass_verify bcast_buffers ca cert \ + chroot cipher client_config_dir client_connect client_disconnect config connect_freq \ + connect_retry connect_timeout connect_retry_max crl_verify dev dev_node dev_type dh \ + echo engine explicit_exit_notify fragment group hand_window hash_size \ + http_proxy http_proxy_option http_proxy_timeout ifconfig ifconfig_pool \ + ifconfig_pool_persist ifconfig_push inactive ipchange iroute keepalive \ + key key_method keysize learn_address link_mtu lladdr local log log_append \ + lport management management_log_cache max_clients \ + max_routes_per_client mode mssfix mtu_disc mute nice ns_cert_type ping \ + ping_exit ping_restart pkcs12 plugin port port_share prng proto rcvbuf \ + redirect_gateway remap_usr1 remote remote_cert_eku remote_cert_ku remote_cert_tls \ + reneg_bytes reneg_pkts reneg_sec \ + replay_persist replay_window resolv_retry route route_delay route_gateway \ + route_metric route_up rport script_security secret server server_bridge setenv shaper sndbuf \ + socks_proxy status status_version syslog tcp_queue_limit tls_auth \ + tls_cipher tls_remote tls_timeout tls_verify tmp_dir topology tran_window \ + tun_mtu tun_mtu_extra txqueuelen user verb down push up + + + SERVICE_PID_FILE="/var/run/openvpn-$s.pid" + service_start /usr/sbin/openvpn --syslog "openvpn($s)" --writepid "$SERVICE_PID_FILE" $ARGS +} + +stop_instance() { + local s="$1" + + section_enabled "$s" || return 1 + + SERVICE_PID_FILE="/var/run/openvpn-$s.pid" + service_stop /usr/sbin/openvpn +} + +reload_instance() { + local s="$1" + + section_enabled "$s" || return 1 + + SERVICE_PID_FILE="/var/run/openvpn-$s.pid" + service_reload /usr/sbin/openvpn +} + +start() { + config_load 'openvpn' + config_foreach start_instance 'openvpn' +} + +stop() { + config_load 'openvpn' + config_foreach stop_instance 'openvpn' +} + +reload() { + config_load 'openvpn' + config_foreach reload_instance 'openvpn' +} + +up() { + local exists + local instance + config_load 'openvpn' + for instance in "$@"; do + config_get exists "$instance" 'TYPE' + if [ "$exists" == "openvpn" ]; then + start_instance "$instance" + fi + done +} + +down() { + local exists + local instance + config_load 'openvpn' + for instance in "$@"; do + config_get exists "$instance" 'TYPE' + if [ "$exists" == "openvpn" ]; then + stop_instance "$instance" + fi + done +} diff --git a/package/network/services/openvpn/files/openvpn.upgrade b/package/network/services/openvpn/files/openvpn.upgrade new file mode 100644 index 000000000..6ae49d22d --- /dev/null +++ b/package/network/services/openvpn/files/openvpn.upgrade @@ -0,0 +1 @@ +/etc/openvpn/ diff --git a/package/network/services/openvpn/patches/100-polarssl_update.patch b/package/network/services/openvpn/patches/100-polarssl_update.patch new file mode 100644 index 000000000..c5c8faf78 --- /dev/null +++ b/package/network/services/openvpn/patches/100-polarssl_update.patch @@ -0,0 +1,60 @@ +--- a/src/openvpn/crypto_polarssl.h ++++ b/src/openvpn/crypto_polarssl.h +@@ -60,7 +60,7 @@ typedef md_context_t hmac_ctx_t; + #define OPENVPN_MODE_OFB POLARSSL_MODE_OFB + + /** Cipher is in CFB mode */ +-#define OPENVPN_MODE_CFB POLARSSL_MODE_CFB128 ++#define OPENVPN_MODE_CFB POLARSSL_MODE_CFB + + /** Cipher should encrypt */ + #define OPENVPN_OP_ENCRYPT POLARSSL_ENCRYPT +--- a/src/openvpn/ssl_polarssl.c ++++ b/src/openvpn/ssl_polarssl.c +@@ -65,23 +65,6 @@ tls_clear_error() + { + } + +-static int default_ciphersuites[] = +-{ +- SSL_EDH_RSA_AES_256_SHA, +- SSL_EDH_RSA_CAMELLIA_256_SHA, +- SSL_EDH_RSA_AES_128_SHA, +- SSL_EDH_RSA_CAMELLIA_128_SHA, +- SSL_EDH_RSA_DES_168_SHA, +- SSL_RSA_AES_256_SHA, +- SSL_RSA_CAMELLIA_256_SHA, +- SSL_RSA_AES_128_SHA, +- SSL_RSA_CAMELLIA_128_SHA, +- SSL_RSA_DES_168_SHA, +- SSL_RSA_RC4_128_SHA, +- SSL_RSA_RC4_128_MD5, +- 0 +-}; +- + void + tls_ctx_server_new(struct tls_root_ctx *ctx) + { +@@ -515,11 +498,11 @@ void key_state_ssl_init(struct key_state + ssl_set_rng (ks_ssl->ctx, ctr_drbg_random, rand_ctx_get()); + + ALLOC_OBJ_CLEAR (ks_ssl->ssn, ssl_session); +- ssl_set_session (ks_ssl->ctx, 0, 0, ks_ssl->ssn ); ++ ssl_set_session (ks_ssl->ctx, ks_ssl->ssn ); + if (ssl_ctx->allowed_ciphers) + ssl_set_ciphersuites (ks_ssl->ctx, ssl_ctx->allowed_ciphers); + else +- ssl_set_ciphersuites (ks_ssl->ctx, default_ciphersuites); ++ ssl_set_ciphersuites (ks_ssl->ctx, ssl_default_ciphersuites); + + /* Initialise authentication information */ + if (is_server) +@@ -828,7 +811,7 @@ print_details (struct key_state_ssl * ks + ssl_get_version (ks_ssl->ctx), + ssl_get_ciphersuite(ks_ssl->ctx)); + +- cert = ks_ssl->ctx->peer_cert; ++ cert = ssl_get_peer_cert(ks_ssl->ctx); + if (cert != NULL) + { + openvpn_snprintf (s2, sizeof (s2), ", " counter_format " bit RSA", (counter_type) cert->rsa.len * 8); |