summaryrefslogtreecommitdiffstats
path: root/package/linux/kernel-patches/027-drivers_net_port_based_qos
diff options
context:
space:
mode:
Diffstat (limited to 'package/linux/kernel-patches/027-drivers_net_port_based_qos')
-rw-r--r--package/linux/kernel-patches/027-drivers_net_port_based_qos1173
1 files changed, 0 insertions, 1173 deletions
diff --git a/package/linux/kernel-patches/027-drivers_net_port_based_qos b/package/linux/kernel-patches/027-drivers_net_port_based_qos
deleted file mode 100644
index bb3ad6f6d..000000000
--- a/package/linux/kernel-patches/027-drivers_net_port_based_qos
+++ /dev/null
@@ -1,1173 +0,0 @@
-diff -Nur linux-mips-cvs/drivers/net/port_based_qos/Atan.c linux-broadcom/drivers/net/port_based_qos/Atan.c
---- linux-mips-cvs/drivers/net/port_based_qos/Atan.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-broadcom/drivers/net/port_based_qos/Atan.c 2005-01-31 13:13:14.000000000 +0100
-@@ -0,0 +1,177 @@
-+#include "Atan.h"
-+#include "c47xx.h"
-+
-+extern void conf_gpio(int x);
-+
-+/*----------------------------------------------------------------------------
-+Write specified data to eeprom
-+entry: *src = pointer to specified data to write
-+ len = number of short(2 bytes) to be written
-+*/
-+void write_eeprom( short RegNumber, unsigned short *data, int len )
-+{
-+ int i2;
-+ unsigned short s_addr, s_data;
-+ unsigned short *src;
-+
-+ src = data;
-+ SetEEpromToSendState();
-+// the write enable(WEN) instruction must be executed before any device
-+// programming can be done
-+
-+ s_data = 0x04c0;
-+ SendAddrToEEprom(s_data); //00000001 0011000000B
-+ SetCSToLowForEEprom();
-+
-+ s_addr = 0x0500 | (RegNumber & 0x0ff); //00000001 01dddddddd
-+ s_data = *src;
-+
-+ for (i2 = len; i2 > 0 ; i2 --)
-+ {
-+ SendAddrToEEprom(s_addr); //00000001 01dddddd
-+ SendDataToEEprom(s_data); //dddddddd dddddddd
-+ SetCSToLowForEEprom();
-+ SetCSToLowForEEprom();
-+ //WriteWait();
-+ s_addr ++;
-+ src ++;
-+ s_data = *src;
-+ }
-+// after all data has been written to EEprom , the write disable(WDS)
-+// instruction must be executed
-+ SetCSToHighForEEprom();
-+ s_data = 0x0400;
-+ SendAddrToEEprom(s_data); //00000001 00000000B
-+ SetCSToLowForEEprom();
-+ SetCSToLowForEEprom();
-+}
-+
-+void SetEEpromToSendState()
-+{
-+ conf_gpio(0x0);
-+ conf_gpio(0x0);
-+ conf_gpio(B_ECS);
-+ conf_gpio(B_ECS);
-+
-+// ;cs __-- ,bit 2
-+// ;sck ____ ,bit 3
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 4
-+// ;
-+}
-+
-+void ResetEEpromToSendState()
-+{
-+ conf_gpio(0x0);
-+ conf_gpio(0x0);
-+ conf_gpio(0x0);
-+ conf_gpio(0x0);
-+
-+// ;cs ____ ,bit 2
-+// ;sck ____ ,bit 3
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 4
-+// ;
-+}
-+
-+void SetCSToLowForEEprom()
-+{
-+ conf_gpio(0x0);
-+ conf_gpio(B_ECK);
-+ conf_gpio(B_ECK);
-+ conf_gpio(0x0);
-+
-+// ;cs ____ ,bit 2
-+// ;sck _--_ ,bit 3
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 4
-+// ;
-+}
-+
-+void SetCSToHighForEEprom()
-+{
-+ conf_gpio(B_ECS);
-+ conf_gpio(B_ECS|B_ECK);
-+ conf_gpio(B_ECS|B_ECK);
-+ conf_gpio(B_ECS);
-+
-+// ;cs ---- ,bit 2
-+// ;sck _--_ ,bit 3
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 4
-+// ;
-+}
-+
-+void send_1ToEEprom()
-+{
-+ conf_gpio(B_ECS|B_EDI);
-+ conf_gpio(B_ECS|B_ECK|B_EDI);
-+ conf_gpio(B_ECS|B_ECK|B_EDI);
-+ conf_gpio(B_ECS|B_EDI);
-+
-+// ;cs ---- ,bit 2
-+// ;sck _--_ ,bit 3
-+// ;di ---- ,bit 5
-+// ;do ____ ,bit 4
-+// ;
-+}
-+
-+void send_0ToEEprom()
-+{
-+ conf_gpio(B_ECS);
-+ conf_gpio(B_ECS|B_ECK);
-+ conf_gpio(B_ECS|B_ECK);
-+ conf_gpio(B_ECS);
-+
-+// ;cs ---- ,bit 2
-+// ;sck _--_ ,bit 3
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 4
-+// ;
-+}
-+
-+#if 0
-+void WriteWait()
-+{
-+ unsigned int status;
-+
-+ SetCSToLowForEEprom();
-+ SetCSToHighForEEprom();
-+ do {
-+ SetCSToHighForEEprom();
-+ //status = ReadGPIOData(EDO);
-+ status = gpio & B_EDO; // read EDO bit
-+ }
-+ while (!status); // wait for write - ready
-+ SetCSToLowForEEprom();
-+}
-+#endif
-+
-+void SendDataToEEprom(short s_data)
-+{
-+ int data_mask;
-+
-+ for (data_mask = 0x8000; data_mask != 0; )
-+ {
-+ if (s_data & data_mask)
-+ send_1ToEEprom();
-+ else
-+ send_0ToEEprom();
-+ data_mask = data_mask >> 1;
-+ }
-+}
-+
-+void SendAddrToEEprom(short s_data)
-+{
-+ int data_mask;
-+
-+ for (data_mask = 0x0400 ;data_mask != 0; )
-+ {
-+ if (s_data & data_mask)
-+ send_1ToEEprom();
-+ else
-+ send_0ToEEprom();
-+ data_mask = data_mask >> 1;
-+ }
-+}
-+
-diff -Nur linux-mips-cvs/drivers/net/port_based_qos/Atan.h linux-broadcom/drivers/net/port_based_qos/Atan.h
---- linux-mips-cvs/drivers/net/port_based_qos/Atan.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-broadcom/drivers/net/port_based_qos/Atan.h 2005-01-31 13:13:14.000000000 +0100
-@@ -0,0 +1,18 @@
-+#ifndef _ATAN_H_
-+#define _ATAN_H_
-+
-+#define SINGLECOLOUR 0x1
-+#define DUALCOLOUR 0x2
-+
-+void write_eeprom(short,unsigned short *,int);
-+void SetEEpromToSendState(void);
-+void ResetEEpromToSendState(void);
-+void SetCSToLowForEEprom(void);
-+void SetCSToHighForEEprom(void);
-+void send_1ToEEprom(void);
-+void send_0ToEEprom(void);
-+//void WriteWait(void);
-+void SendAddrToEEprom(short);
-+void SendDataToEEprom(short);
-+
-+#endif
-diff -Nur linux-mips-cvs/drivers/net/port_based_qos/Makefile linux-broadcom/drivers/net/port_based_qos/Makefile
---- linux-mips-cvs/drivers/net/port_based_qos/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-broadcom/drivers/net/port_based_qos/Makefile 2005-01-31 13:13:14.000000000 +0100
-@@ -0,0 +1,27 @@
-+# Copyright 2001, Cybertan Corporation
-+# All Rights Reserved.
-+#
-+# This is UNPUBLISHED PROPRIETARY SOURCE CODE of Cybertan Corporation;
-+# the contents of this file may not be disclosed to third parties, copied or
-+# duplicated in any form, in whole or in part, without the prior written
-+# permission of Cybertan Corporation.
-+#
-+#
-+# $Id$
-+#
-+
-+O_TARGET := port_based_qos_mod.o
-+
-+PORT_BASED_QOS_MOD_OBJS := port_based_qos.o Atan.o c47xx.o eeprom.o
-+
-+export-objs :=
-+obj-y := $(PORT_BASED_QOS_MOD_OBJS)
-+obj-m := $(O_TARGET)
-+
-+SRCBASE := $(TOPDIR)/../..
-+EXTRA_CFLAGS += -I$(SRCBASE)/include -Wall -I$(SRCBASE)/
-+
-+vpath %.c $(SRCBASE)/shared
-+
-+include $(TOPDIR)/Rules.make
-+
-diff -Nur linux-mips-cvs/drivers/net/port_based_qos/c47xx.c linux-broadcom/drivers/net/port_based_qos/c47xx.c
---- linux-mips-cvs/drivers/net/port_based_qos/c47xx.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-broadcom/drivers/net/port_based_qos/c47xx.c 2005-01-31 13:13:14.000000000 +0100
-@@ -0,0 +1,85 @@
-+#include <typedefs.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+#include <osl.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+
-+#include <sbpci.h>
-+#include <sbchipc.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbmips.h>
-+#include "c47xx.h"
-+extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioin(void *sbh);
-+extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val);
-+
-+#define OUTENMASK B_RESET|B_ECS|B_ECK|B_EDI
-+#define CFGMASK B_ECS|B_ECK|B_EDI
-+#define BIT(x) (1 << (x))
-+#define ASSERT(exp) do {} while (0)
-+
-+void
-+conf_gpio(int x)
-+{
-+ ASSERT(sbh);
-+
-+ /* Enable all of output pins */
-+ sb_gpioouten(sbh, OUTENMASK, OUTENMASK);
-+
-+ /* We don't want the B_RESET pin changed, unless
-+ * it tries to set the B_RESET pin.
-+ */
-+ if (x & B_RESET)
-+ sb_gpioout(sbh, OUTENMASK, x);
-+ else
-+ sb_gpioout(sbh, CFGMASK, x);
-+
-+}
-+
-+void
-+gpio_line_set(int x, unsigned int value)
-+{
-+ ASSERT(sbh);
-+
-+ if (value == 1)
-+ sb_gpioout(sbh, BIT(x), BIT(x));
-+ else if (value == 0)
-+ sb_gpioout(sbh, BIT(x), 0);
-+}
-+
-+void
-+gpio_line_get(int x, int *value)
-+{
-+ ASSERT(sbh);
-+
-+ *value = (sb_gpioin(sbh) >> x) & 0x1;
-+}
-+
-+void
-+gpio_line_config_in(int x)
-+{
-+ ASSERT(sbh);
-+
-+ sb_gpioouten(sbh, BIT(x), 0);
-+ sb_gpiointmask(sbh, BIT(x), BIT(x));
-+}
-+
-+void
-+gpio_line_config_out(int x)
-+{
-+ ASSERT(sbh);
-+
-+ sb_gpiointmask(sbh, BIT(x), 0);
-+ sb_gpioouten(sbh, BIT(x), BIT(x));
-+}
-+
-+void
-+gpio_line_config_out_all(int x)
-+{
-+ ASSERT(sbh);
-+
-+ sb_gpioouten(sbh, OUTENMASK, OUTENMASK);
-+}
-diff -Nur linux-mips-cvs/drivers/net/port_based_qos/c47xx.h linux-broadcom/drivers/net/port_based_qos/c47xx.h
---- linux-mips-cvs/drivers/net/port_based_qos/c47xx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-broadcom/drivers/net/port_based_qos/c47xx.h 2005-01-31 13:13:14.000000000 +0100
-@@ -0,0 +1,23 @@
-+#ifndef _C47XX_H_
-+#define _C47XX_H_
-+
-+extern void *bcm947xx_sbh;
-+#define sbh bcm947xx_sbh
-+
-+#define GPIO0 0
-+#define GPIO1 1
-+#define GPIO2 2
-+#define GPIO3 3
-+#define GPIO4 4
-+#define GPIO5 5
-+#define GPIO6 6
-+#define GPIO7 7
-+#define GPIO8 8
-+
-+#define B_RESET 1<<GPIO0
-+#define B_ECS 1<<GPIO2
-+#define B_ECK 1<<GPIO3
-+#define B_EDO 1<<GPIO4
-+#define B_EDI 1<<GPIO5
-+
-+#endif
-diff -Nur linux-mips-cvs/drivers/net/port_based_qos/eeprom.c linux-broadcom/drivers/net/port_based_qos/eeprom.c
---- linux-mips-cvs/drivers/net/port_based_qos/eeprom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-broadcom/drivers/net/port_based_qos/eeprom.c 2005-01-31 13:13:14.000000000 +0100
-@@ -0,0 +1,355 @@
-+#include <linux/delay.h>
-+
-+#define EEDO_PIN 4
-+#define EECS_PIN 2
-+#define EECK_PIN 3
-+#define EEDI_PIN 5
-+#define RESET_PIN 0
-+
-+static void SetCSToLowForEEprom(void);
-+//static void SetCSToHighForEEprom(void);
-+static void send1ToEEprom(void);
-+static void send0ToEEprom(void);
-+static void InitSerialInterface(void);
-+static void SerialPulse(void);
-+static void WriteDataToRegister(unsigned short RegNumber, unsigned short data);
-+void ReadDataFromRegister(unsigned short addr, unsigned short *hidata, unsigned short *lodata,int select_count);
-+static void WriteDataToEEprom(unsigned short addr, unsigned short data);
-+static void WriteCmdToEEprom(unsigned short cmd);
-+extern void gpio_line_set(int x, unsigned int value);
-+extern void gpio_line_get(int x, int *value);
-+extern void gpio_line_config_out(int x);
-+extern void gpio_line_config_in(int x);
-+extern void gpio_line_config_out_all(void);
-+// ;cs __-- ,bit 3
-+// ;sck ____ ,bit 4
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 6
-+// ;
-+
-+static void SetEEpromToSendState(void)
-+{
-+ gpio_line_set(EECS_PIN, 0);
-+ gpio_line_set(EECK_PIN, 0);
-+ gpio_line_set(EEDI_PIN, 1);
-+// gpio_line_set(EEDO_PIN, 1); /* high impedance */
-+
-+ mdelay(1);
-+ gpio_line_set(EECS_PIN, 1);
-+// gpio_line_set(EEDO_PIN, 1); /* high impedance */
-+}
-+
-+#if 0
-+static void EEpromInit(void)
-+{
-+ gpio_line_set(EECS_PIN, 0);
-+ gpio_line_set(EECK_PIN, 0);
-+ gpio_line_set(EEDI_PIN, 1);
-+ gpio_line_set(EEDO_PIN, 1); /* high impedance */
-+
-+ mdelay(1);
-+}
-+
-+// ;cs ____ ,bit 3
-+// ;sck ____ ,bit 4
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 6
-+// ;
-+static void ResetEEpromToSendState(void)
-+{
-+ gpio_line_set(EECS_PIN, 0);
-+ gpio_line_set(EEDI_PIN, 0);
-+ //gpio_line_set(EEDO_PIN, 0);
-+ gpio_line_set(EECK_PIN, 0);
-+}
-+#endif /* 0 */
-+
-+// ;cs ____ ,bit 3
-+// ;sck _--_ ,bit 4
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 6
-+// ;
-+static void SetCSToLowForEEprom(void)
-+{
-+ /* minimum tcs is 1us */
-+ gpio_line_set(EECS_PIN, 0);
-+ gpio_line_set(EECS_PIN, 0);
-+
-+ gpio_line_set(EECK_PIN, 0);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 0);
-+
-+ gpio_line_set(EECS_PIN, 1);
-+
-+ udelay(10);
-+}
-+
-+#if 0
-+// ;cs ---- ,bit 3
-+// ;sck _--_ ,bit 4
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 6
-+// ;
-+static void SetCSToHighForEEprom(void)
-+{
-+ gpio_line_set(EECS_PIN, 1);
-+
-+ /* min tskh and tskl is 1us */
-+ gpio_line_set(EECK_PIN, 1);
-+ udelay(2);
-+ gpio_line_set(EECK_PIN, 0);
-+}
-+#endif /* 0 */
-+
-+// ;cs ---- ,bit 3
-+// ;sck _--_ ,bit 4
-+// ;di ---- ,bit 5
-+// ;do ____ ,bit 6
-+// ;
-+static void send1ToEEprom(void)
-+{
-+//printf("send1ToEEprom(1)...");
-+ gpio_line_set(EEDI_PIN, 1);
-+
-+ gpio_line_set(EECK_PIN, 0);
-+ udelay(1);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 1);
-+ udelay(1);
-+ gpio_line_set(EECK_PIN, 0);
-+}
-+
-+// ;cs ---- ,bit 3
-+// ;sck _--_ ,bit 4
-+// ;di ____ ,bit 5
-+// ;do ____ ,bit 6
-+// ;
-+static void send0ToEEprom(void)
-+{
-+//printf("send0ToEEprom(0)...");
-+ gpio_line_set(EEDI_PIN, 0);
-+
-+ gpio_line_set(EECK_PIN, 0);
-+ udelay(1);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 1);
-+ udelay(1);
-+ gpio_line_set(EECK_PIN, 0);
-+}
-+
-+static void WriteDataToEEprom(unsigned short addr, unsigned short data)
-+{
-+ unsigned short addr_mask, data_mask;
-+
-+ SetEEpromToSendState();
-+ for (addr_mask = 0x400; addr_mask != 0; )
-+ {
-+ if (addr & addr_mask)
-+ send1ToEEprom();
-+ else
-+ send0ToEEprom();
-+ addr_mask = addr_mask >> 1;
-+ }
-+ for (data_mask = 0x8000; data_mask != 0; )
-+ {
-+ if (data & data_mask)
-+ send1ToEEprom();
-+ else
-+ send0ToEEprom();
-+ data_mask = data_mask >> 1;
-+ }
-+ SetCSToLowForEEprom();
-+}
-+
-+static void WriteCmdToEEprom(unsigned short cmd)
-+{
-+ unsigned short cmd_mask;
-+
-+ SetEEpromToSendState();
-+ for (cmd_mask = 0x0400 ;cmd_mask != 0; )
-+ {
-+ if (cmd & cmd_mask)
-+ send1ToEEprom();
-+ else
-+ send0ToEEprom();
-+ cmd_mask = cmd_mask >> 1;
-+ }
-+ SetCSToLowForEEprom();
-+}
-+
-+/*
-+ * Write data to configure registers through EEPROM interface, even we do not have
-+ * an external EEPROM connectted, ADM6996 got a virtual AT39C66 inside
-+ */
-+static void WriteDataToRegister(unsigned short RegNumber, unsigned short data)
-+{
-+ unsigned short cmd, addr;
-+
-+ printk("WriteDataToRegister(RegNumber=0x%x, data=0x%x)\n", RegNumber, data);
-+
-+// the write enable(WEN) instruction must be executed before any device
-+// programming can be done
-+ cmd = 0x04c0;
-+ WriteCmdToEEprom(cmd); //00000001 0011000000B
-+
-+ addr = 0x0500 | (RegNumber & 0x0ff); //00000001 01dddddddd
-+ WriteDataToEEprom(addr, data); //00000001 01dddddd
-+
-+
-+// after all data has been written to EEprom , the write disable(WDS)
-+// instruction must be executed
-+ cmd = 0x0400;
-+ WriteCmdToEEprom(cmd); //00000001 00000000B
-+}
-+
-+static void SerialDelay(int count)
-+{
-+ udelay(count);
-+}
-+
-+static void InitSerialInterface(void)
-+{
-+ gpio_line_set(EECK_PIN, 0);
-+ gpio_line_set(EEDI_PIN, 0);
-+}
-+
-+static void SerialPulse(void)
-+{
-+ gpio_line_set(EECK_PIN, 0);
-+ gpio_line_set(EECK_PIN, 1);
-+ SerialDelay(10);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_set(EECK_PIN, 0);
-+}
-+/*
-+ * Since there is no EEPROM is our board, read from EEPROM need to obey the timing alike
-+ * MII interface, EECK = MDC, EEDI = MDIO, please refer to section 4.3 of ADM6996 datasheet
-+ */
-+void ReadDataFromRegister(unsigned short addr, unsigned short *hidata, unsigned short *lodata, int select_count)
-+{
-+ unsigned short addr_mask, data_mask;
-+ int value, i;
-+ unsigned char StartBits, Opcode, TAbits;
-+
-+ gpio_line_config_out_all();
-+ mdelay(1);
-+ /* initialize serial interface */
-+ gpio_line_set(EECS_PIN, 0);
-+ InitSerialInterface();
-+
-+ /* Preamble, 35 bits */
-+ gpio_line_set(EECK_PIN, 0);
-+ gpio_line_set(EEDI_PIN, 1);
-+ for (i = 0; i < 35; i++)
-+ {
-+ gpio_line_set(EECK_PIN, 1);
-+ SerialDelay(10);
-+ gpio_line_set(EECK_PIN, 0);
-+ SerialDelay(10);
-+ }
-+
-+ /* Start bits, 2-bit(01b) */
-+ InitSerialInterface();
-+ StartBits = 0x01;
-+ for (i = 0; i < 2; i++)
-+ {
-+ value = (StartBits & 2) ? 1 : 0;
-+ gpio_line_set(EEDI_PIN, value);
-+ SerialDelay(1);
-+ SerialPulse();
-+ StartBits <<= 1;
-+ }
-+
-+ /* Opcode, read = 10b */
-+ InitSerialInterface();
-+ Opcode = 0x02;
-+ for (i = 0; i < 2; i++)
-+ {
-+ value = (Opcode & 0x02) ? 1 : 0;
-+ gpio_line_set(EEDI_PIN, value);
-+ SerialDelay(1);
-+ SerialPulse();
-+ Opcode <<= 1;
-+ }
-+
-+ /* 10 bits register address */
-+ /* 1-bit Table Select, 2-bit Device Address, 7-bit Register Address */
-+ InitSerialInterface();
-+ if (select_count)
-+ addr = (addr & 0x7f) | 0x200;
-+ else
-+ addr = addr & 0x7f ;
-+ for (addr_mask = 0x200; addr_mask != 0; addr_mask >>= 1)
-+ {
-+ value = (addr & addr_mask) ? 1 : 0;
-+ gpio_line_set(EEDI_PIN, value);
-+ SerialDelay(1);
-+ SerialPulse();
-+ }
-+
-+ /* TA, turnaround 2-bit */
-+ InitSerialInterface();
-+ TAbits = 0x02;
-+ gpio_line_config_in(EEDI_PIN);
-+ for (i = 0; i < 2; i++)
-+ {
-+ gpio_line_set(EECK_PIN, 1);
-+ SerialDelay(4);
-+ gpio_line_get(EEDI_PIN, &value);
-+ SerialDelay(4);
-+ TAbits <<= 1;
-+ gpio_line_set(EECK_PIN, 1);
-+ }
-+
-+
-+ /* Latch data from serial management EEDI pin */
-+ *hidata = 0;
-+ gpio_line_set(EECK_PIN, 0);
-+ for (data_mask = 0x8000; data_mask != 0; data_mask >>= 1)
-+ {
-+ SerialDelay(4);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_get(EEDI_PIN, &value);
-+ if (value)
-+ {
-+ *hidata |= data_mask;
-+ }
-+ gpio_line_set(EECK_PIN, 0);
-+ SerialDelay(4);
-+ }
-+ *lodata = 0;
-+ gpio_line_set(EECK_PIN, 0);
-+ for (data_mask = 0x8000; data_mask != 0; data_mask >>= 1)
-+ {
-+ SerialDelay(4);
-+ gpio_line_set(EECK_PIN, 1);
-+ gpio_line_get(EEDI_PIN, &value);
-+ if (value)
-+ {
-+ *lodata |= data_mask;
-+ }
-+ gpio_line_set(EECK_PIN, 0);
-+ SerialDelay(4);
-+ }
-+
-+ SerialDelay(2);
-+
-+ /* Idle, EECK must send at least one clock at idle time */
-+ SerialPulse();
-+ gpio_line_set(EECK_PIN, 0);
-+ SerialDelay(10);
-+ gpio_line_set(EECK_PIN, 1);
-+ SerialDelay(10);
-+ gpio_line_set(EECK_PIN, 0);
-+ SerialPulse();
-+
-+ gpio_line_config_out(EEDI_PIN);
-+ gpio_line_set(EECS_PIN, 1);
-+
-+ printk("ReadDataFromRegister(addr=0x%x, hidata=0x%x, lodata=0x%x)\n", addr, *hidata, *lodata);
-+}
-diff -Nur linux-mips-cvs/drivers/net/port_based_qos/port_based_qos.c linux-broadcom/drivers/net/port_based_qos/port_based_qos.c
---- linux-mips-cvs/drivers/net/port_based_qos/port_based_qos.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-broadcom/drivers/net/port_based_qos/port_based_qos.c 2005-01-31 13:13:14.000000000 +0100
-@@ -0,0 +1,460 @@
-+ /*
-+ * Remaining issues:
-+ * + stats support
-+ * + multicast support
-+ * + media sense
-+ * + half/full duplex
-+ * - random MAC addr.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <asm/io.h>
-+
-+#include <linux/sysctl.h>
-+#include <cy_conf.h>
-+
-+#define MODULE_NAME "port_based_qos_mod"
-+#define DEVICE_NAME "qos"
-+#define MODULE_VERSION "0.0.1"
-+
-+extern void ReadDataFromRegister(unsigned short addr, unsigned short *hidata, unsigned short *lodata,int select_count);
-+
-+#ifdef PERFORMANCE_SUPPORT
-+static struct ctl_table_header *qos_sysctl_header;
-+static unsigned long qos[28];
-+
-+static ctl_table mytable[] = {
-+ { 2000, "qos",
-+ qos, sizeof(qos),
-+ 0644, NULL,
-+ proc_dointvec },
-+ { 0 }
-+};
-+
-+static unsigned short statis_addr_map[7][6] ={
-+ {0x04, 0x06, 0x08, 0x0a, 0x0b, 0x0c},
-+ {0x16, 0x18, 0x1a, 0x1c, 0x1d, 0x1e},
-+ {0x0d, 0x0f, 0x11, 0x13, 0x14, 0x15},
-+ {0x1f, 0x21, 0x23, 0x25, 0x26, 0x27},
-+ {0x31, 0x33, 0x35, 0x37, 0x38, 0x39},
-+ {0x28, 0x2a, 0x2c, 0x2e, 0x2f, 0x30},
-+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01}
-+};
-+
-+unsigned long get_statistic_from_serial(unsigned short port, unsigned short item)
-+{
-+ unsigned short hidata, lodata;
-+
-+ ReadDataFromRegister(statis_addr_map[item][port], &hidata, &lodata, 1);
-+ return ((hidata << 16) | lodata);
-+}
-+#endif
-+
-+#ifdef HW_QOS_SUPPORT
-+struct port_qos_t{
-+ int addr;
-+ int content_mask;
-+ int *content_set;
-+};
-+
-+void WriteDataToRegister_(unsigned short reg_idx, unsigned short content_idx);
-+extern void write_eeprom(short,short *,int);
-+
-+#define BANDWIDTH_1_BIT 2
-+#define BANDWIDTH_2_BIT 4
-+#define BANDWIDTH_3_BIT 6
-+#define BANDWIDTH_4_BIT 7
-+
-+#define PORT_CONFIG_1 0x3
-+#define PORT_CONFIG_2 0x5
-+#define PORT_CONFIG_3 0x7
-+#define PORT_CONFIG_4 0x8
-+#define BANDWIDTH_CTL_123 0x31
-+#define BANDWIDTH_CTL_4 0x32
-+#define BANDWIDTH_CTL_ENABLE 0x33
-+#define DISCARD_MODE 0x10
-+#define TOS_PRIO_MAP 0xf
-+
-+#define PRIORITY_MASK 0xfc7f
-+#define PRIORITY_DISABLE_MASK 0xfc7e
-+#define FLOW_CTL_MASK 0xfffe
-+#define RATE_LIMIT_MASK_1 0xff8f
-+#define RATE_LIMIT_MASK_2 0xf8ff
-+#define RATE_LIMIT_MASK_3 0x8fff
-+#define RATE_LIMIT_MASK_4 0xfff8
-+#define BANDWIDTH_CTL_MASK 0xff2b
-+#define DISCARD_MASK 0x0fff
-+
-+#define BANDWIDTH_ENABLE_1 1 << BANDWIDTH_1_BIT//04
-+#define BANDWIDTH_ENABLE_2 1 << BANDWIDTH_2_BIT//10
-+#define BANDWIDTH_ENABLE_3 1 << BANDWIDTH_3_BIT//40
-+#define BANDWIDTH_ENABLE_4 1 << BANDWIDTH_4_BIT//80
-+#define BANDWIDTH_CTL_MASK_1 0xffff^BANDWIDTH_ENABLE_1//0xfffb
-+#define BANDWIDTH_CTL_MASK_2 0xffff^BANDWIDTH_ENABLE_2//0xffef
-+#define BANDWIDTH_CTL_MASK_3 0xffff^BANDWIDTH_ENABLE_3//0xffbf
-+#define BANDWIDTH_CTL_MASK_4 0xffff^BANDWIDTH_ENABLE_4//0xff7f
-+
-+/*static int disable_content[] = {0x0};
-+//static int enable_content[] = {0xd4, 0x0cff};//bit 7,6,4,2; Q1=11(50%),Q0=00(0%)*/
-+//static int sw_content[] = {0x0,0x0c00};//bit 7,6,4,2; Q1=11(50%),Q0=00(0%)
-+static int sw_content[] = {0x0,0xc000};//bit 7,6,4,2; Q1=11(50%),Q0=00(0%)
-+static int port_priority_content[] = {0x080,0x380};//Q0,Q3
-+//static int port_priority_content[] = {0x300,0x0};//Q1,Q0
-+static int port_flow_ctl_content[] = {0x0,0x1};
-+static int port_rate_limit_content_1[] = {0x0,0x00,0x10,0x20,0x30,0x40,0x50,0x60,0x70};
-+static int port_rate_limit_content_2[] = {0x0,0x000,0x100,0x200,0x300,0x400,0x500,0x600,0x700};
-+static int port_rate_limit_content_3[] = {0x0,0x0000,0x1000,0x2000,0x3000,0x4000,0x5000,0x6000,0x7000};
-+static int port_rate_limit_content_4[] = {0x0,0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7};
-+static int port_rate_limit_enable_1[] = {0x0, BANDWIDTH_ENABLE_1};
-+static int port_rate_limit_enable_2[] = {0x0, BANDWIDTH_ENABLE_2};
-+static int port_rate_limit_enable_3[] = {0x0, BANDWIDTH_ENABLE_3};
-+static int port_rate_limit_enable_4[] = {0x0, BANDWIDTH_ENABLE_4};
-+
-+static struct port_qos_t port_mii_disable[] = {
-+ { BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK, sw_content},
-+ //{ DISCARD_MODE, DISCARD_MASK, sw_content},
-+ { PORT_CONFIG_1, PRIORITY_MASK, sw_content},//port_priority_1
-+ { PORT_CONFIG_2, PRIORITY_MASK, sw_content},//port_priority_2
-+ { PORT_CONFIG_3, PRIORITY_MASK, sw_content},//port_priority_3
-+ { PORT_CONFIG_4, PRIORITY_MASK, sw_content},//port_priority_4
-+ { PORT_CONFIG_1, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_1
-+ { PORT_CONFIG_2, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_2
-+ { PORT_CONFIG_3, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_3
-+ { PORT_CONFIG_4, FLOW_CTL_MASK, &port_flow_ctl_content[1]},//port_flow_control_4
-+ { -1}
-+};
-+
-+static struct port_qos_t port_mii_enable[] = {
-+ //{ BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK, enable_content},
-+ //{ DISCARD_MODE, DISCARD_MASK, sw_content},
-+ { -1}
-+};
-+
-+struct port_qos_t *port_mii_sw_array[] = {port_mii_disable, port_mii_enable};
-+
-+/*static struct port_qos_t port_mii_addr[] = {
-+ { PORT_CONFIG_1, PRIORITY_MASK, port_priority_content},//port_priority_1
-+ { PORT_CONFIG_1, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_1
-+ //{ "port_frame_type_1", 0x3},
-+ { BANDWIDTH_CTL_123, RATE_LIMIT_MASK_14, port_rate_limit_content_14},//port_rate_limit_1
-+ { PORT_CONFIG_2, PRIORITY_MASK, port_priority_content},//port_priority_2
-+ { PORT_CONFIG_2, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_2
-+ //{ "port_frame_type_2", 0x5},
-+ { BANDWIDTH_CTL_123, RATE_LIMIT_MASK_2, port_rate_limit_content_2},//port_rate_limit_2
-+ { PORT_CONFIG_3, PRIORITY_MASK, port_priority_content},//port_priority_3
-+ { PORT_CONFIG_3, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_3
-+ //{ "port_frame_type_3", 0x7},
-+ { BANDWIDTH_CTL_123, RATE_LIMIT_MASK_3, port_rate_limit_content_3},//port_rate_limit_3
-+ //{ "port_priority_4", 0x8, 0x380},
-+ { PORT_CONFIG_4, PRIORITY_MASK, port_priority_content},//port_priority_4
-+ { PORT_CONFIG_4, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_4
-+ //{ "port_frame_type_4", 0x8},
-+ { BANDWIDTH_CTL_4, RATE_LIMIT_MASK_14, port_rate_limit_content_14},//port_rate_limit_4
-+ { -1}
-+};*/
-+
-+static struct port_qos_t priority_1[] = {
-+ { PORT_CONFIG_1, PRIORITY_MASK, port_priority_content},//port_priority_1
-+ { -1}
-+};
-+static struct port_qos_t flow_control_1[] = {
-+ { PORT_CONFIG_1, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_1
-+ { -1}
-+};
-+static struct port_qos_t rate_limit_1[] = {
-+ { BANDWIDTH_CTL_123, RATE_LIMIT_MASK_1, port_rate_limit_content_1},//port_rate_limit_1
-+ { BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_1, port_rate_limit_enable_1},//port_rate_limit_4
-+ { -1}
-+};
-+static struct port_qos_t priority_2[] = {
-+ { PORT_CONFIG_2, PRIORITY_MASK, port_priority_content},//port_priority_2
-+ { -1}
-+};
-+static struct port_qos_t flow_control_2[] = {
-+ { PORT_CONFIG_2, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_2
-+ { -1}
-+};
-+static struct port_qos_t rate_limit_2[] = {
-+ { BANDWIDTH_CTL_123, RATE_LIMIT_MASK_2, port_rate_limit_content_2},//port_rate_limit_2
-+ { BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_2, port_rate_limit_enable_2},//port_rate_limit_4
-+ { -1}
-+};
-+static struct port_qos_t priority_3[] = {
-+ { PORT_CONFIG_3, PRIORITY_MASK, port_priority_content},//port_priority_3
-+ { -1}
-+};
-+static struct port_qos_t flow_control_3[] = {
-+ { PORT_CONFIG_3, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_3
-+ { -1}
-+};
-+static struct port_qos_t rate_limit_3[] = {
-+ { BANDWIDTH_CTL_123, RATE_LIMIT_MASK_3, port_rate_limit_content_3},//port_rate_limit_3
-+ { BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_3, port_rate_limit_enable_3},//port_rate_limit_4
-+ { -1}
-+};
-+static struct port_qos_t priority_4[] = {
-+ { PORT_CONFIG_4, PRIORITY_MASK, port_priority_content},//port_priority_4
-+ { -1}
-+};
-+static struct port_qos_t flow_control_4[] = {
-+ { PORT_CONFIG_4, FLOW_CTL_MASK, port_flow_ctl_content},//port_flow_control_4
-+ { -1}
-+};
-+static struct port_qos_t rate_limit_4[] = {
-+ { BANDWIDTH_CTL_4, RATE_LIMIT_MASK_4, port_rate_limit_content_4},//port_rate_limit_4
-+ { BANDWIDTH_CTL_ENABLE, BANDWIDTH_CTL_MASK_4, port_rate_limit_enable_4},//port_rate_limit_4
-+ { -1}
-+};
-+
-+static struct port_qos_t *port_mii_addr[] = {
-+ priority_1,
-+ flow_control_1,
-+ rate_limit_1,
-+ priority_2,
-+ flow_control_2,
-+ rate_limit_2,
-+ priority_3,
-+ flow_control_3,
-+ rate_limit_3,
-+ priority_4,
-+ flow_control_4,
-+ rate_limit_4,
-+ NULL
-+};
-+
-+void WriteDataToRegister_(unsigned short reg_idx, unsigned short content_idx)
-+{
-+ short RegNumber;
-+ unsigned short data, hidata=0x0, lodata=0x0;
-+ int i;
-+ struct port_qos_t *port_qos = port_mii_addr[reg_idx];
-+
-+ //printk("\nWriteDataToRegister_:reg_idx=%d content_idx=%d\n", reg_idx, content_idx);
-+ if (!port_qos)
-+ port_qos = port_mii_sw_array[content_idx];
-+
-+ for (i=0; port_qos[i].addr != -1; i++)
-+ {
-+ RegNumber = port_qos[i].addr;
-+ ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
-+
-+ if (!(RegNumber % 2)) /* even port number use lower word */
-+ hidata = lodata;
-+
-+ data = (hidata & port_qos[i].content_mask) | (((i > 0) && (content_idx > 1))? port_qos[i].content_set[1] : port_qos[i].content_set[content_idx]);
-+
-+ write_eeprom(RegNumber, &data, 1);
-+ ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
-+ }
-+ ReadDataFromRegister(0xf, &hidata, &lodata, 0);
-+
-+ /*RegNumber = port_mii_addr[reg_idx].addr;
-+ if (RegNumber == -1)//Disable or Enable
-+ {
-+ struct port_qos_t *port_mii_sw = port_mii_sw_array[content_idx];
-+
-+ printk("\nWriteDataToRegister_:reg_idx=%d content_idx=%d\n", reg_idx, content_idx);
-+ for (i=0; port_mii_sw[i].addr != -1; i++)
-+ {
-+ RegNumber = port_mii_sw[i].addr;
-+
-+ ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
-+
-+ if (!(RegNumber % 2))
-+ hidata = lodata;
-+
-+ data = (hidata & port_mii_sw[i].content_mask) | port_mii_sw[i].content_set[i];
-+
-+ write_eeprom(RegNumber, &data, 1);
-+
-+ ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
-+ printk("\n============== %s===============\n", (content_idx==0)?"disable":"enable");
-+ }
-+ }
-+ else
-+ {
-+ ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
-+
-+ if (!(RegNumber % 2))
-+ hidata = lodata;
-+
-+ data = (hidata & port_mii_addr[reg_idx].content_mask) | port_mii_addr[reg_idx].content_set[content_idx];
-+
-+ write_eeprom(RegNumber, &data, 1);
-+ ReadDataFromRegister(RegNumber, &hidata, &lodata, 0);
-+ }*/
-+}
-+#endif
-+
-+static int dev_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)req->ifr_data;
-+#ifdef PERFORMANCE_SUPPORT
-+ int item, port;
-+
-+ unsigned long status_item;
-+#endif
-+
-+ switch (cmd)
-+ {
-+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
-+ case SIOCDEVPRIVATE: /* for binary compat, remove in 2.5 */
-+
-+ /* Fall through to the SIOCGMIIREG, taken from eepro100 and rtl
-+ * drivers */
-+#ifdef PERFORMANCE_SUPPORT
-+ case SIOCGMIIREG: /* Read MII PHY register. */
-+ for (item=0; item<6; item++)
-+ for (port=1; port<5; port++){
-+ qos[(item * 4) + (port-1)] = get_statistic_from_serial(port, item);
-+ }
-+
-+ status_item = get_statistic_from_serial(0, 6);
-+
-+ qos[24] = (0x1 & (status_item >> 8));
-+ qos[25] = (0x1 & (status_item >> 16));
-+ qos[26] = (0x1 & (status_item >> 24));
-+ qos[27] = (0x1 & (status_item >> 28));
-+
-+ return 0;
-+#endif
-+
-+ case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
-+#ifdef HW_QOS_SUPPORT
-+ case SIOCSMIIREG: /* Write MII PHY register. */
-+ {
-+ printk("\n x phy_id=%x\n", data->phy_id);
-+ printk("\n x reg_num=%x\n", data->reg_num);
-+ printk("\n x val_in=%x\n", data->val_in);
-+ printk("\n x val_out=%x\n", data->val_out);
-+
-+ WriteDataToRegister_(data->phy_id, data->val_in);
-+ return 0;
-+ }
-+#endif
-+ case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
-+ default:
-+ return -EOPNOTSUPP;
-+ }
-+}
-+
-+static int __devinit qos_eth_probe(struct net_device *dev)
-+{
-+
-+ SET_MODULE_OWNER(dev);
-+
-+ ether_setup(dev);
-+
-+ strcpy(dev->name, DEVICE_NAME "0");
-+
-+ dev->do_ioctl = dev_do_ioctl;
-+
-+ return 0;
-+}
-+
-+#ifdef HW_QOS_SUPPORT
-+static char *port_option_name[] = {
-+ "port_priority_1",
-+ "port_flow_control_1",
-+ //{ "port_frame_type_1",
-+ "port_rate_limit_1",
-+ "port_priority_2",
-+ "port_flow_control_2",
-+ //{ "port_frame_type_2",
-+ "port_rate_limit_2",
-+ "port_priority_3",
-+ "port_flow_control_3",
-+ //{ "port_frame_type_3",
-+ "port_rate_limit_3",
-+ "port_priority_4",
-+ //{ "port_priority_4", PORT_CONFIG_4, PRIORITY_MASK, port_priority_content},
-+ "port_flow_control_4",
-+ //{ "port_frame_type_4",
-+ "port_rate_limit_4",
-+ "QoS",
-+ NULL
-+};
-+
-+extern char *nvram_get(const char *name);
-+extern uint bcm_atoi(char *s);
-+
-+static int set_port_option(struct net_device *dev, unsigned short port_addr, char *option_content)
-+{
-+ struct ifreq ifr;
-+ struct mii_ioctl_data stats;
-+
-+ stats.phy_id=port_addr;
-+ stats.val_in=bcm_atoi(option_content);
-+
-+ ifr.ifr_data = (void *)&stats;
-+
-+ return dev_do_ioctl(dev, &ifr, SIOCSMIIREG);
-+}
-+
-+
-+void
-+restore_default_from_NV(struct net_device *dev)
-+{
-+ unsigned short i;
-+ char *value = NULL;
-+
-+ for (i = 0; port_option_name[i]; i++)
-+ {
-+ if((value = nvram_get(port_option_name[i])))
-+ set_port_option(dev, i, value);
-+ }
-+ return;
-+}
-+#endif
-+
-+static struct net_device qos_devices;
-+
-+/* Module initialization and cleanup */
-+int init_module(void)
-+{
-+ int res;
-+ struct net_device *dev;
-+
-+ printk("Initializing " MODULE_NAME " driver " MODULE_VERSION "\n");
-+
-+ dev = &qos_devices;
-+
-+ dev->init = qos_eth_probe;
-+
-+ if ((res = register_netdev(dev)))
-+ printk("Failed to register netdev. res = %d\n", res);
-+
-+#ifdef PERFORMANCE_SUPPORT
-+ qos_sysctl_header = register_sysctl_table(mytable, 0);
-+#endif
-+#ifdef HW_QOS_SUPPORT
-+ restore_default_from_NV(dev);
-+ write_eeprom(TOS_PRIO_MAP, &sw_content[0], 1);/* disable TOS priority map*/
-+#endif
-+ return 0;
-+}
-+
-+void cleanup_module(void)
-+{
-+ struct net_device *dev = &qos_devices;
-+ if (dev->priv != NULL)
-+ {
-+ unregister_netdev(dev);
-+ kfree(dev->priv);
-+ dev->priv = NULL;
-+ }
-+
-+#ifdef PERFORMANCE_SUPPORT
-+ unregister_sysctl_table(qos_sysctl_header);
-+#endif
-+}
-+
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 08:52:04 +0000