diff options
Diffstat (limited to 'package/fonera-mp3-drv/src')
| -rw-r--r-- | package/fonera-mp3-drv/src/Makefile | 19 | ||||
| -rw-r--r-- | package/fonera-mp3-drv/src/ar531x.h | 1124 | ||||
| -rw-r--r-- | package/fonera-mp3-drv/src/ar531xlnx.h | 140 | ||||
| -rw-r--r-- | package/fonera-mp3-drv/src/mp3_drv.c | 308 | ||||
| -rw-r--r-- | package/fonera-mp3-drv/src/vs10xx.c | 328 |
5 files changed, 1919 insertions, 0 deletions
diff --git a/package/fonera-mp3-drv/src/Makefile b/package/fonera-mp3-drv/src/Makefile new file mode 100644 index 000000000..fda632ead --- /dev/null +++ b/package/fonera-mp3-drv/src/Makefile @@ -0,0 +1,19 @@ +# $Id$ +# +# Makefile for mp3 - vs1011b driver +# +# Copyright (C) 2007 John '2B|!2B' Crispin john@phrozen.org +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version +# 2 of the License, or (at your option) any later version. +# + +obj-m := mp3_drv.o + +ifeq ($(MAKING_MODULES),1) +#export-objs := mp3_drv.o + +-include $(TOPDIR)/Rules.make +endif diff --git a/package/fonera-mp3-drv/src/ar531x.h b/package/fonera-mp3-drv/src/ar531x.h new file mode 100644 index 000000000..9176c15ab --- /dev/null +++ b/package/fonera-mp3-drv/src/ar531x.h @@ -0,0 +1,1124 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. + */ + +#ifndef AR531X_H +#define AR531X_H 1 + + +#ifndef CONFIG_AR531X_COBRA + +#include <asm/addrspace.h> + +/* Address Map */ +#define AR531X_WLAN0 0x18000000 +#define AR531X_WLAN1 0x18500000 +#define AR531X_ENET0 0x18100000 +#define AR531X_ENET1 0x18200000 +#define AR531X_SDRAMCTL 0x18300000 +#define AR531X_FLASHCTL 0x18400000 +#define AR531X_APBBASE 0x1c000000 +#define AR531X_FLASH 0x1e000000 + +/* + * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that + * should be considered available. The AR5312 supports 2 enet MACS, + * even though many reference boards only actually use 1 of them + * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. + * The AR2312 supports 1 enet MAC. + */ +#define AR531X_NUM_ENET_MAC 2 + +/* + * Need these defines to determine true number of ethernet MACs + */ +#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ +#define AR531X_RADIO_MASK_OFF 0xc8 +#define AR531X_RADIO0_MASK 0x0003 +#define AR531X_RADIO1_MASK 0x000c +#define AR531X_RADIO1_S 2 + +/* + * AR531X_NUM_WMAC defines the number of Wireless MACs that\ + * should be considered available. + */ +#define AR531X_NUM_WMAC 2 + +/* Reset/Timer Block Address Map */ +#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) +#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ +#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ +#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ +#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ +#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ +#define AR531X_RESET (AR531X_RESETTMR + 0x0020) +#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) +#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) +#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) +#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) +#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) +#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) +#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ +#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ + +/* AR531X_WD_CTRL register bit field definitions */ +#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 +#define AR531X_WD_CTRL_NMI 0x0001 +#define AR531X_WD_CTRL_RESET 0x0002 + +/* AR531X_ISR register bit field definitions */ +#define AR531X_ISR_NONE 0x0000 +#define AR531X_ISR_TIMER 0x0001 +#define AR531X_ISR_AHBPROC 0x0002 +#define AR531X_ISR_AHBDMA 0x0004 +#define AR531X_ISR_GPIO 0x0008 +#define AR531X_ISR_UART0 0x0010 +#define AR531X_ISR_UART0DMA 0x0020 +#define AR531X_ISR_WD 0x0040 +#define AR531X_ISR_LOCAL 0x0080 + +/* AR531X_RESET register bit field definitions */ +#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ +#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ +#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ +#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ +#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ +#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ +#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ +#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ +#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ +#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ +#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ +#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ +#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ +#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ +#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ +#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ +#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ +#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ + +#define AR531X_RESET_WMAC0_BITS \ + AR531X_RESET_WLAN0 |\ + AR531X_RESET_WARM_WLAN0_MAC |\ + AR531X_RESET_WARM_WLAN0_BB + +#define AR531X_RESERT_WMAC1_BITS \ + AR531X_RESET_WLAN1 |\ + AR531X_RESET_WARM_WLAN1_MAC |\ + AR531X_RESET_WARM_WLAN1_BB + +/* AR5312_CLOCKCTL1 register bit field definitions */ +#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 +#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR5312 and AR2312 */ +#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 +#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR2313 */ +#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 +#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 +#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 +#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 +#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 + + +/* AR531X_ENABLE register bit field definitions */ +#define AR531X_ENABLE_WLAN0 0x0001 +#define AR531X_ENABLE_ENET0 0x0002 +#define AR531X_ENABLE_ENET1 0x0004 +#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ +#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ +#define AR531X_ENABLE_WLAN1 \ + (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) + +/* AR531X_REV register bit field definitions */ +#define AR531X_REV_WMAC_MAJ 0xf000 +#define AR531X_REV_WMAC_MAJ_S 12 +#define AR531X_REV_WMAC_MIN 0x0f00 +#define AR531X_REV_WMAC_MIN_S 8 +#define AR531X_REV_MAJ 0x00f0 +#define AR531X_REV_MAJ_S 4 +#define AR531X_REV_MIN 0x000f +#define AR531X_REV_MIN_S 0 +#define AR531X_REV_CHIP (REV_MAJ|REV_MIN) + +/* Major revision numbers, bits 7..4 of Revision ID register */ +#define AR531X_REV_MAJ_AR5312 0x4 +#define AR531X_REV_MAJ_AR2313 0x5 + +/* Minor revision numbers, bits 3..0 of Revision ID register */ +#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ +#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ + +/* AR531X_FLASHCTL register bit field definitions */ +#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ +#define FLASHCTL_IDCY_S 0 +#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ +#define FLASHCTL_WST1_S 5 +#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ +#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ +#define FLASHCTL_WST2_S 11 +#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ +#define FLASHCTL_AC_S 16 +#define FLASHCTL_AC_128K 0x00000000 +#define FLASHCTL_AC_256K 0x00010000 +#define FLASHCTL_AC_512K 0x00020000 +#define FLASHCTL_AC_1M 0x00030000 +#define FLASHCTL_AC_2M 0x00040000 +#define FLASHCTL_AC_4M 0x00050000 +#define FLASHCTL_AC_8M 0x00060000 +#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ +#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ +#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ +#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ +#define FLASHCTL_WP 0x04000000 /* Write protect */ +#define FLASHCTL_BM 0x08000000 /* Burst mode */ +#define FLASHCTL_MW 0x30000000 /* Memory width */ +#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ +#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ +#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ +#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ +#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ +#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ + +/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ +#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) +#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) +#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) + +/* ARM SDRAM Controller -- just enough to determine memory size */ +#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) +#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ +#define MEM_CFG1_AC0_S 8 +#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ +#define MEM_CFG1_AC1_S 12 + +/* GPIO Address Map */ +#define AR531X_GPIO (AR531X_APBBASE + 0x2000) +#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ +#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ +#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ + +/* GPIO Control Register bit field definitions */ +#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ +#define GPIO_CR_O(x) (0 << (x)) /* mask for output */ +#define GPIO_CR_I(x) (1 << (x)) /* mask for input */ +#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ +#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ + + +typedef unsigned int AR531X_REG; + +#define sysRegRead(phys) \ + (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) + +#define sysRegWrite(phys, val) \ + ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) + + +/* + * This is board-specific data that is stored in a "fixed" location in flash. + * It is shared across operating systems, so it should not be changed lightly. + * The main reason we need it is in order to extract the ethernet MAC + * address(es). + */ +struct ar531x_boarddata { + u32 magic; /* board data is valid */ +#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ + u16 cksum; /* checksum (starting with BD_REV 2) */ + u16 rev; /* revision of this struct */ +#define BD_REV 4 + char boardName[64]; /* Name of board */ + u16 major; /* Board major number */ + u16 minor; /* Board minor number */ + u32 config; /* Board configuration */ +#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ +#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ +#define BD_UART1 0x00000004 /* UART1 is stuffed */ +#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ +#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ +#define BD_SYSLED 0x00000020 /* System LED stuffed */ +#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ +#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ +#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ +#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ +#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ +#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ +#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ +#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ +#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ +#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ +#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ +#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ + u16 resetConfigGpio; /* Reset factory GPIO pin */ + u16 sysLedGpio; /* System LED GPIO pin */ + + u32 cpuFreq; /* CPU core frequency in Hz */ + u32 sysFreq; /* System frequency in Hz */ + u32 cntFreq; /* Calculated C0_COUNT frequency */ + + u8 wlan0Mac[6]; + u8 enet0Mac[6]; + u8 enet1Mac[6]; + + u16 pciId; /* Pseudo PCIID for common code */ + u16 memCap; /* cap bank1 in MB */ + + /* version 3 */ + u8 wlan1Mac[6]; /* (ar5212) */ +}; + +#else + +/* + * Add support for Cobra + * + * AR531XPLUSreg.h Register definitions for Atheros AR5311 and AR5312 chipsets. + * - WLAN registers are listed in + * hal/ar5211/ar5211Reg.h + * hal/ar5212/ar5212Reg.h + * - Ethernet registers are listed in ar531xenet.h + * - Standard UART is 16550 compatible. + */ + + +/* + * Address map + */ +#define AR531XPLUS_SDRAM0 0x00000000 /* DRAM */ +#define AR531XPLUS_SPI_READ 0x08000000 /* SPI FLASH */ +#define AR531XPLUS_WLAN0 0xB0000000 /* Wireless MMR */ +#define AR531XPLUS_PCI 0xB0100000 /* PCI MMR */ +#define AR531XPLUS_SDRAMCTL 0xB0300000 /* SDRAM MMR */ +#define AR531XPLUS_LOCAL 0xB0400000 /* LOCAL BUS MMR */ +#define AR531XPLUS_ENET0 0xB0500000 /* ETHERNET MMR */ +#define AR531XPLUS_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ +#define AR531XPLUS_UART0 0xB1100003 /* UART MMR */ +#define AR531XPLUS_SPI 0xB1300000 /* SPI FLASH MMR */ +#define AR531XPLUS_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */ +#define AR531XPLUS_RAM1 0x40000000 /* ram alias */ +#define AR531XPLUS_PCIEXT 0x80000000 /* pci external */ +#define AR531XPLUS_RAM2 0xc0000000 /* ram alias */ +#define AR531XPLUS_RAM3 0xe0000000 /* ram alias */ + +#define AR531X_ENET0 AR531XPLUS_ENET0 +#define AR531X_ENET1 0 +/* + * Reset Register + */ +#define AR531XPLUS_COLD_RESET (AR531XPLUS_DSLBASE + 0x0000) + +/* Cold Reset */ +#define RESET_COLD_AHB 0x00000001 +#define RESET_COLD_APB 0x00000002 +#define RESET_COLD_CPU 0x00000004 +#define RESET_COLD_CPUWARM 0x00000008 +#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ + +/* Warm Reset */ + +#define AR531XPLUS_RESET (AR531XPLUS_DSLBASE + 0x0004) +#define AR531X_RESET AR531XPLUS_RESET + +#define RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ +#define RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ +#define RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ +#define RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ +#define RESET_MEMCTL 0x00000010 /* warm reset memory controller */ +#define RESET_LOCAL 0x00000020 /* warm reset local bus */ +#define RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ +#define RESET_SPI 0x00000080 /* warm reset SPI interface */ +#define RESET_UART0 0x00000100 /* warm reset UART0 */ +#define RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ +#define RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ +#define RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ + +#define AR531X_RESET_ENET0 RESET_ENET0 +#define AR531X_RESET_EPHY0 RESET_EPHY0 +#define AR531X_RESET_ENET1 0 +#define AR531X_RESET_EPHY1 0 + +/* + * AHB master arbitration control + */ +#define AR531XPLUS_AHB_ARB_CTL (AR531XPLUS_DSLBASE + 0x0008) + +#define ARB_CPU 0x00000001 /* CPU, default */ +#define ARB_WLAN 0x00000002 /* WLAN */ +#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ +#define ARB_LOCAL 0x00000008 /* LOCAL */ +#define ARB_PCI 0x00000010 /* PCI */ +#define ARB_ETHERNET 0x00000020 /* Ethernet */ +#define ARB_RETRY 0x00000100 /* retry policy, debug only */ + +/* + * Config Register + */ +#define AR531XPLUS_ENDIAN_CTL (AR531XPLUS_DSLBASE + 0x000c) + +#define CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ +#define CONFIG_WLAN 0x00000002 /* WLAN byteswap */ +#define CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ +#define CONFIG_PCI 0x00000008 /* PCI byteswap */ +#define CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ +#define CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ +#define CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ + +#define CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ +#define CONFIG_CPU 0x00000400 /* CPU big endian */ +#define CONFIG_PCIAHB 0x00000800 +#define CONFIG_PCIAHB_BRIDGE 0x00001000 +#define CONFIG_SPI 0x00008000 /* SPI byteswap */ +#define CONFIG_CPU_DRAM 0x00010000 +#define CONFIG_CPU_PCI 0x00020000 +#define CONFIG_CPU_MMR 0x00040000 +#define CONFIG_BIG 0x00000400 + + +/* + * NMI control + */ +#define AR531XPLUS_NMI_CTL (AR531XPLUS_DSLBASE + 0x0010) + +#define NMI_EN 1 + +/* + * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). + */ +#define AR531XPLUS_SREV (AR531XPLUS_DSLBASE + 0x0014) + +#define AR531X_REV AR531XPLUS_SREV + +#define REV_MAJ 0x00f0 +#define REV_MAJ_S 4 +#define REV_MIN 0x000f +#define REV_MIN_S 0 +#define REV_CHIP (REV_MAJ|REV_MIN) + +#define AR531X_REV_MAJ REV_MAJ +#define AR531X_REV_MAJ_S REV_MAJ_S +#define AR531X_REV_MIN REV_MIN +#define AR531X_REV_MIN_S REV_MIN_S +#define REV_CHIP (REV_MAJ|REV_MIN) +/* + * Need these defines to determine true number of ethernet MACs + */ +#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ +#define AR531X_RADIO_MASK_OFF 0xc8 +#define AR531X_RADIO0_MASK 0x0003 +#define AR531X_RADIO1_MASK 0x000c +#define AR531X_RADIO1_S 2 + +/* Major revision numbers, bits 7..4 of Revision ID register */ +#define AR531X_REV_MAJ_AR5312 0x4 +#define AR531X_REV_MAJ_AR2313 0x5 + +/* + * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that + * should be considered available. The AR5312 supports 2 enet MACS, + * even though many reference boards only actually use 1 of them + * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. + * The AR2312 supports 1 enet MAC. + */ +#define AR531X_NUM_ENET_MAC 1 + +/* + * Interface Enable + */ +#define AR531XPLUS_IF_CTL (AR531XPLUS_DSLBASE + 0x0018) + +#define IF_MASK 0x00000007 +#define IF_DISABLED 0 +#define IF_PCI 1 +#define IF_TS_LOCAL 2 +#define IF_ALL 3 /* only for emulation with separate pins */ +#define IF_LOCAL_HOST 0x00000008 +#define IF_PCI_HOST 0x00000010 +#define IF_PCI_INTR 0x00000020 +#define IF_PCI_CLK_MASK 0x00030000 +#define IF_PCI_CLK_INPUT 0 +#define IF_PCI_CLK_OUTPUT_LOW 1 +#define IF_PCI_CLK_OUTPUT_CLK 2 +#define IF_PCI_CLK_OUTPUT_HIGH 3 +#define IF_PCI_CLK_SHIFT 16 + + +/* Major revision numbers, bits 7..4 of Revision ID register */ +#define REV_MAJ_AR5311 0x01 +#define REV_MAJ_AR5312 0x04 +#define REV_MAJ_AR5315 0x0B + +/* + * APB Interrupt control + */ + +#define AR531XPLUS_ISR (AR531XPLUS_DSLBASE + 0x0020) +#define AR531XPLUS_IMR (AR531XPLUS_DSLBASE + 0x0024) +#define AR531XPLUS_GISR (AR531XPLUS_DSLBASE + 0x0028) + +#define ISR_UART0 0x0001 /* high speed UART */ +#define ISR_I2C_RSVD 0x0002 /* I2C bus */ +#define ISR_SPI 0x0004 /* SPI bus */ +#define ISR_AHB 0x0008 /* AHB error */ +#define ISR_APB 0x0010 /* APB error */ +#define ISR_TIMER 0x0020 /* timer */ +#define ISR_GPIO 0x0040 /* GPIO */ +#define ISR_WD 0x0080 /* watchdog */ +#define ISR_IR_RSVD 0x0100 /* IR */ + +#define IMR_UART0 ISR_UART0 +#define IMR_I2C_RSVD ISR_I2C_RSVD +#define IMR_SPI ISR_SPI +#define IMR_AHB ISR_AHB +#define IMR_APB ISR_APB +#define IMR_TIMER ISR_TIMER +#define IMR_GPIO ISR_GPIO +#define IMR_WD ISR_WD +#define IMR_IR_RSVD ISR_IR_RSVD + +#define GISR_MISC 0x0001 +#define GISR_WLAN0 0x0002 +#define GISR_MPEGTS_RSVD 0x0004 +#define GISR_LOCALPCI 0x0008 +#define GISR_WMACPOLL 0x0010 +#define GISR_TIMER 0x0020 +#define GISR_ETHERNET 0x0040 + +/* + * Interrupt routing from IO to the processor IP bits + * Define our inter mask and level + */ +#define AR531XPLUS_INTR_MISCIO SR_IBIT3 +#define AR531XPLUS_INTR_WLAN0 SR_IBIT4 +#define AR531XPLUS_INTR_ENET0 SR_IBIT5 +#define AR531XPLUS_INTR_LOCALPCI SR_IBIT6 +#define AR531XPLUS_INTR_WMACPOLL SR_IBIT7 +#define AR531XPLUS_INTR_COMPARE SR_IBIT8 + +/* + * Timers + */ +#define AR531XPLUS_TIMER (AR531XPLUS_DSLBASE + 0x0030) +#define AR531XPLUS_RELOAD (AR531XPLUS_DSLBASE + 0x0034) +#define AR531XPLUS_WD (AR531XPLUS_DSLBASE + 0x0038) +#define AR531XPLUS_WDC (AR531XPLUS_DSLBASE + 0x003c) + +#define WDC_RESET 0x00000002 /* reset on watchdog */ +#define WDC_NMI 0x00000001 /* NMI on watchdog */ +#define WDC_IGNORE_EXPIRATION 0x00000000 + +/* + * Interface Debug + */ +#define AR531X_FLASHDBG (AR531X_RESETTMR + 0x0040) +#define AR531X_MIIDBG (AR531X_RESETTMR + 0x0044) + + +/* + * CPU Performance Counters + */ +#define AR531XPLUS_PERFCNT0 (AR531XPLUS_DSLBASE + 0x0048) +#define AR531XPLUS_PERFCNT1 (AR531XPLUS_DSLBASE + 0x004c) + +#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */ +#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */ +#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */ +#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */ +#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ +#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ +#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ + +#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ +#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ +#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ +#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ +#define PERF_VRADDR 0x0010 /* Count valid read address cycles */ +#define PERF_VWADDR 0x0020 /* Count valid write address cycles */ +#define PERF_VWDATA 0x0040 /* Count valid write data cycles */ + +/* + * AHB Error Reporting. + */ +#define AR531XPLUS_AHB_ERR0 (AR531XPLUS_DSLBASE + 0x0050) /* error */ +#define AR531XPLUS_AHB_ERR1 (AR531XPLUS_DSLBASE + 0x0054) /* haddr */ +#define AR531XPLUS_AHB_ERR2 (AR531XPLUS_DSLBASE + 0x0058) /* hwdata */ +#define AR531XPLUS_AHB_ERR3 (AR531XPLUS_DSLBASE + 0x005c) /* hrdata */ +#define AR531XPLUS_AHB_ERR4 (AR531XPLUS_DSLBASE + 0x0060) /* status */ + +#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ + /* write 1 to clear all bits in ERR0 */ +#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ +#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ + +#define PROCERR_HMAST 0x0000000f +#define PROCERR_HMAST_DFLT 0 +#define PROCERR_HMAST_WMAC 1 +#define PROCERR_HMAST_ENET 2 +#define PROCERR_HMAST_PCIENDPT 3 +#define PROCERR_HMAST_LOCAL 4 +#define PROCERR_HMAST_CPU 5 +#define PROCERR_HMAST_PCITGT 6 + +#define PROCERR_HMAST_S 0 +#define PROCERR_HWRITE 0x00000010 +#define PROCERR_HSIZE 0x00000060 +#define PROCERR_HSIZE_S 5 +#define PROCERR_HTRANS 0x00000180 +#define PROCERR_HTRANS_S 7 +#define PROCERR_HBURST 0x00000e00 +#define PROCERR_HBURST_S 9 + + + +/* + * Clock Control + */ +#define AR531XPLUS_PLLC_CTL (AR531XPLUS_DSLBASE + 0x0064) +#define AR531XPLUS_PLLV_CTL (AR531XPLUS_DSLBASE + 0x0068) +#define AR531XPLUS_CPUCLK (AR531XPLUS_DSLBASE + 0x006c) +#define AR531XPLUS_AMBACLK (AR531XPLUS_DSLBASE + 0x0070) +#define AR531XPLUS_SYNCCLK (AR531XPLUS_DSLBASE + 0x0074) +#define AR531XPLUS_DSL_SLEEP_CTL (AR531XPLUS_DSLBASE + 0x0080) +#define AR531XPLUS_DSL_SLEEP_DUR (AR531XPLUS_DSLBASE + 0x0084) + +/* PLLc Control fields */ +#define PLLC_REF_DIV_M 0x00000003 +#define PLLC_REF_DIV_S 0 +#define PLLC_FDBACK_DIV_M 0x0000007C +#define PLLC_FDBACK_DIV_S 2 +#define PLLC_ADD_FDBACK_DIV_M 0x00000080 +#define PLLC_ADD_FDBACK_DIV_S 7 +#define PLLC_CLKC_DIV_M 0x0001c000 +#define PLLC_CLKC_DIV_S 14 +#define PLLC_CLKM_DIV_M 0x00700000 +#define PLLC_CLKM_DIV_S 20 + +/* CPU CLK Control fields */ +#define CPUCLK_CLK_SEL_M 0x00000003 +#define CPUCLK_CLK_SEL_S 0 +#define CPUCLK_CLK_DIV_M 0x0000000c +#define CPUCLK_CLK_DIV_S 2 + +/* AMBA CLK Control fields */ +#define AMBACLK_CLK_SEL_M 0x00000003 +#define AMBACLK_CLK_SEL_S 0 +#define AMBACLK_CLK_DIV_M 0x0000000c +#define AMBACLK_CLK_DIV_S 2 + +#if defined(COBRA_EMUL) +#define AR531XPLUS_AMBA_CLOCK_RATE 20000000 +#define AR531XPLUS_CPU_CLOCK_RATE 40000000 +#else +#if defined(DEFAULT_PLL) +#define AR531XPLUS_AMBA_CLOCK_RATE 40000000 +#define AR531XPLUS_CPU_CLOCK_RATE 40000000 +#else +#define AR531XPLUS_AMBA_CLOCK_RATE 92000000 +#define AR531XPLUS_CPU_CLOCK_RATE 184000000 +#endif /* ! DEFAULT_PLL */ +#endif /* ! COBRA_EMUL */ + +#define AR531XPLUS_UART_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE +#define AR531XPLUS_SDRAM_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE + +/* + * The UART computes baud rate as: + * baud = clock / (16 * divisor) + * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL). + */ +#define DESIRED_BAUD_RATE 38400 + +/* + * The WATCHDOG value is computed as + * 10 seconds * AR531X_WATCHDOG_CLOCK_RATE + */ +#define DESIRED_WATCHDOG_SECONDS 10 +#define AR531X_WATCHDOG_TIME \ + (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE) + + +#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */ + + + /* + * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode. + */ +#define AR531X_PCICFG (AR531X_RESETTMR + 0x00b0) +#define ASSOC_STATUS_M 0x00000003 +#define ASSOC_STATUS_NONE 0 +#define ASSOC_STATUS_PENDING 1 +#define ASSOC_STATUS_ASSOCIATED 2 +#define LED_MODE_M 0x0000001c +#define LED_BLINK_THRESHOLD_M 0x000000e0 +#define LED_SLOW_BLINK_MODE 0x00000100 + +/* + * GPIO + */ + +#define AR531XPLUS_GPIO_DI (AR531XPLUS_DSLBASE + 0x0088) +#define AR531XPLUS_GPIO_DO (AR531XPLUS_DSLBASE + 0x0090) +#define AR531XPLUS_GPIO_CR (AR531XPLUS_DSLBASE + 0x0098) +#define AR531XPLUS_GPIO_INT (AR531XPLUS_DSLBASE + 0x00a0) + +#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ +#define GPIO_CR_O(x) (1 << (x)) /* output */ +#define GPIO_CR_I(x) (0 << (x)) /* input */ + +#define GPIO_INT(x,Y) ((x) << (8 * (Y))) /* interrupt enable */ +#define GPIO_INT_M(Y) ((0x3F) << (8 * (Y))) /* mask for int */ +#define GPIO_INT_LVL(x,Y) ((x) << (8 * (Y) + 6)) /* interrupt level */ +#define GPIO_INT_LVL_M(Y) ((0x3) << (8 * (Y) + 6)) /* mask for int level */ + +#define AR531XPLUS_RESET_GPIO 5 +#define AR531XPLUS_NUM_GPIO 22 + + +/* + * PCI Clock Control + */ + +#define AR531XPLUS_PCICLK (AR531XPLUS_DSLBASE + 0x00a4) + +#define PCICLK_INPUT_M 0x3 +#define PCICLK_INPUT_S 0 + +#define PCICLK_PLLC_CLKM 0 +#define PCICLK_PLLC_CLKM1 1 +#define PCICLK_PLLC_CLKC 2 +#define PCICLK_REF_CLK 3 + +#define PCICLK_DIV_M 0xc +#define PCICLK_DIV_S 2 + +#define PCICLK_IN_FREQ 0 +#define PCICLK_IN_FREQ_DIV_6 1 +#define PCICLK_IN_FREQ_DIV_8 2 +#define PCICLK_IN_FREQ_DIV_10 3 + +/* + * Observation Control Register + */ +#define AR531XPLUS_OCR (AR531XPLUS_DSLBASE + 0x00b0) +#define OCR_GPIO0_IRIN 0x0040 +#define OCR_GPIO1_IROUT 0x0080 +#define OCR_GPIO3_RXCLR 0x0200 + +/* + * General Clock Control + */ + +#define AR531XPLUS_MISCCLK (AR531XPLUS_DSLBASE + 0x00b4) +#define MISCCLK_PLLBYPASS_EN 0x00000001 +#define MISCCLK_PROCREFCLK 0x00000002 + +/* + * SDRAM Controller + * - No read or write buffers are included. + */ +#define AR531XPLUS_MEM_CFG (AR531XPLUS_SDRAMCTL + 0x00) +#define AR531XPLUS_MEM_CTRL (AR531XPLUS_SDRAMCTL + 0x0c) +#define AR531XPLUS_MEM_REF (AR531XPLUS_SDRAMCTL + 0x10) + +#define SDRAM_DATA_WIDTH_M 0x00006000 +#define SDRAM_DATA_WIDTH_S 13 + +#define SDRAM_COL_WIDTH_M 0x00001E00 +#define SDRAM_COL_WIDTH_S 9 + +#define SDRAM_ROW_WIDTH_M 0x000001E0 +#define SDRAM_ROW_WIDTH_S 5 + +#define SDRAM_BANKADDR_BITS_M 0x00000018 +#define SDRAM_BANKADDR_BITS_S 3 + + +/* + * SDRAM Memory Refresh (MEM_REF) value is computed as: + * MEMCTL_SREFR = (Tr * hclk_freq) / R + * where Tr is max. time of refresh of any single row + * R is number of rows in the DRAM + * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192 + */ +#if defined(COBRA_EMUL) +#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x96 +#else +#if defined(DEFAULT_PLL) +#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x200 +#else +#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x61a +#endif /* ! DEFAULT_PLL */ +#endif + +#if defined(AR531XPLUS) + +#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ +#define AR531XPLUS_SDRAM_DATA_WIDTH 16 /* bits */ +#define AR531XPLUS_SDRAM_COL_WIDTH 8 +#define AR531XPLUS_SDRAM_ROW_WIDTH 12 + +#else + +#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ +#define AR531XPLUS_SDRAM_DATA_WIDTH 16 +#define AR531XPLUS_SDRAM_COL_WIDTH 8 +#define AR531XPLUS_SDRAM_ROW_WIDTH 12 + +#endif /* ! AR531XPLUS */ + +/* + * SPI Flash Interface Registers + */ + +#define AR531XPLUS_SPI_CTL (AR531XPLUS_SPI + 0x00) +#define AR531XPLUS_SPI_OPCODE (AR531XPLUS_SPI + 0x04) +#define AR531XPLUS_SPI_DATA (AR531XPLUS_SPI + 0x08) + +#define SPI_CTL_START 0x00000100 +#define SPI_CTL_BUSY 0x00010000 +#define SPI_CTL_TXCNT_MASK 0x0000000f +#define SPI_CTL_RXCNT_MASK 0x000000f0 +#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff +#define SPI_CTL_SIZE_MASK 0x00060000 + +#define SPI_CTL_CLK_SEL_MASK 0x03000000 +#define SPI_OPCODE_MASK 0x000000ff + +/* + * PCI-MAC Configuration registers + */ +#define PCI_MAC_RC (AR531XPLUS_PCI + 0x4000) +#define PCI_MAC_SCR (AR531XPLUS_PCI + 0x4004) +#define PCI_MAC_INTPEND (AR531XPLUS_PCI + 0x4008) +#define PCI_MAC_SFR (AR531XPLUS_PCI + 0x400C) +#define PCI_MAC_PCICFG (AR531XPLUS_PCI + 0x4010) +#define PCI_MAC_SREV (AR531XPLUS_PCI + 0x4020) + +#define PCI_MAC_RC_MAC 0x00000001 +#define PCI_MAC_RC_BB 0x00000002 + +#define PCI_MAC_SCR_SLMODE_M 0x00030000 +#define PCI_MAC_SCR_SLMODE_S 16 +#define PCI_MAC_SCR_SLM_FWAKE 0 +#define PCI_MAC_SCR_SLM_FSLEEP 1 +#define PCI_MAC_SCR_SLM_NORMAL 2 + +#define PCI_MAC_SFR_SLEEP 0x00000001 + +#define PCI_MAC_PCICFG_SPWR_DN 0x00010000 + + + + +/* + * PCI Bus Interface Registers + */ +#define AR531XPLUS_PCI_1MS_REG (AR531XPLUS_PCI + 0x0008) +#define AR531XPLUS_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ + +#define AR531XPLUS_PCI_MISC_CONFIG (AR531XPLUS_PCI + 0x000c) +#define AR531XPLUS_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ +#define AR531XPLUS_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ +#define AR531XPLUS_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ +#define AR531XPLUS_PCIMISC_RST_MODE 0x00000030 +#define AR531XPLUS_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ +#define AR531XPLUS_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ +#define AR531XPLUS_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ +#define AR531XPLUS_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ +#define AR531XPLUS_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ +#define AR531XPLUS_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ +#define AR531XPLUS_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ +#define AR531XPLUS_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ + +#define AR531XPLUS_PCI_OUT_TSTAMP (AR531XPLUS_PCI + 0x0010) + +#define AR531XPLUS_PCI_UNCACHE_CFG (AR531XPLUS_PCI + 0x0014) + +#define AR531XPLUS_PCI_IN_EN (AR531XPLUS_PCI + 0x0100) +#define AR531XPLUS_PCI_IN_EN0 0x01 /* Enable chain 0 */ +#define AR531XPLUS_PCI_IN_EN1 0x02 /* Enable chain 1 */ +#define AR531XPLUS_PCI_IN_EN2 0x04 /* Enable chain 2 */ +#define AR531XPLUS_PCI_IN_EN3 0x08 /* Enable chain 3 */ + +#define AR531XPLUS_PCI_IN_DIS (AR531XPLUS_PCI + 0x0104) +#define AR531XPLUS_PCI_IN_DIS0 0x01 /* Disable chain 0 */ +#define AR531XPLUS_PCI_IN_DIS1 0x02 /* Disable chain 1 */ +#define AR531XPLUS_PCI_IN_DIS2 0x04 /* Disable chain 2 */ +#define AR531XPLUS_PCI_IN_DIS3 0x08 /* Disable chain 3 */ + +#define AR531XPLUS_PCI_IN_PTR (AR531XPLUS_PCI + 0x0200) + +#define AR531XPLUS_PCI_OUT_EN (AR531XPLUS_PCI + 0x0400) +#define AR531XPLUS_PCI_OUT_EN0 0x01 /* Enable chain 0 */ + +#define AR531XPLUS_PCI_OUT_DIS (AR531XPLUS_PCI + 0x0404) +#define AR531XPLUS_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ + +#define AR531XPLUS_PCI_OUT_PTR (AR531XPLUS_PCI + 0x0408) + +#define AR531XPLUS_PCI_INT_STATUS (AR531XPLUS_PCI + 0x0500) /* write one to clr */ +#define AR531XPLUS_PCI_TXINT 0x00000001 /* Desc In Completed */ +#define AR531XPLUS_PCI_TXOK 0x00000002 /* Desc In OK */ +#define AR531XPLUS_PCI_TXERR 0x00000004 /* Desc In ERR */ +#define AR531XPLUS_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ +#define AR531XPLUS_PCI_RXINT 0x00000010 /* Desc Out Completed */ +#define AR531XPLUS_PCI_RXOK 0x00000020 /* Desc Out OK */ +#define AR531XPLUS_PCI_RXERR 0x00000040 /* Desc Out ERR */ +#define AR531XPLUS_PCI_RXEOL 0x00000080 /* Desc Out EOL */ +#define AR531XPLUS_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ +#define AR531XPLUS_PCI_MASK 0x0000FFFF /* Desc Mask */ +#define AR531XPLUS_PCI_EXT_INT 0x02000000 +#define AR531XPLUS_PCI_ABORT_INT 0x04000000 + +#define AR531XPLUS_PCI_INT_MASK (AR531XPLUS_PCI + 0x0504) /* same as INT_STATUS */ + +#define AR531XPLUS_PCI_INTEN_REG (AR531XPLUS_PCI + 0x0508) +#define AR531XPLUS_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ +#define AR531XPLUS_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ + +#define AR531XPLUS_PCI_HOST_IN_EN (AR531XPLUS_PCI + 0x0800) +#define AR531XPLUS_PCI_HOST_IN_DIS (AR531XPLUS_PCI + 0x0804) +#define AR531XPLUS_PCI_HOST_IN_PTR (AR531XPLUS_PCI + 0x0810) +#define AR531XPLUS_PCI_HOST_OUT_EN (AR531XPLUS_PCI + 0x0900) +#define AR531XPLUS_PCI_HOST_OUT_DIS (AR531XPLUS_PCI + 0x0904) +#define AR531XPLUS_PCI_HOST_OUT_PTR (AR531XPLUS_PCI + 0x0908) + + +/* + * Local Bus Interface Registers + */ +#define AR531XPLUS_LB_CONFIG (AR531XPLUS_LOCAL + 0x0000) +#define AR531XPLUS_LBCONF_OE 0x00000001 /* =1 OE is low-true */ +#define AR531XPLUS_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ +#define AR531XPLUS_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ +#define AR531XPLUS_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ +#define AR531XPLUS_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ +#define AR531XPLUS_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ +#define AR531XPLUS_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ +#define AR531XPLUS_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ +#define AR531XPLUS_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ +#define AR531XPLUS_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ +#define AR531XPLUS_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ +#define AR531XPLUS_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ +#define AR531XPLUS_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ +#define AR531XPLUS_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ +#define AR531XPLUS_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ +#define AR531XPLUS_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ +#define AR531XPLUS_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ +#define AR531XPLUS_LBCONF_INT 0x00020000 /* =1 Intr is low true */ +#define AR531XPLUS_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ +#define AR531XPLUS_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ +#define AR531XPLUS_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ +#define AR531XPLUS_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ +#define AR531XPLUS_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ +#define AR531XPLUS_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ +#define AR531XPLUS_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ + +#define AR531XPLUS_LB_CLKSEL (AR531XPLUS_LOCAL + 0x0004) +#define AR531XPLUS_LBCLK_EXT 0x0001 /* use external clk for lb */ + +#define AR531XPLUS_LB_1MS (AR531XPLUS_LOCAL + 0x0008) +#define AR531XPLUS_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ + +#define AR531XPLUS_LB_MISCCFG (AR531XPLUS_LOCAL + 0x000C) +#define AR531XPLUS_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ +#define AR531XPLUS_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ +#define AR531XPLUS_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ +#define AR531XPLUS_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ +#define AR531XPLUS_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ +#define AR531XPLUS_LBM_TIMEOUT_MASK 0x00FFFF80 +#define AR531XPLUS_LBM_TIMEOUT_SHFT 7 +#define AR531XPLUS_LBM_PORTMUX 0x07000000 + + +#define AR531XPLUS_LB_RXTSOFF (AR531XPLUS_LOCAL + 0x0010) + +#define AR531XPLUS_LB_TX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0100) +#define AR531XPLUS_LB_TXEN_0 0x01 +#define AR531XPLUS_LB_TXEN_1 0x02 +#define AR531XPLUS_LB_TXEN_2 0x04 +#define AR531XPLUS_LB_TXEN_3 0x08 + +#define AR531XPLUS_LB_TX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0104) +#define AR531XPLUS_LB_TX_DESC_PTR (AR531XPLUS_LOCAL + 0x0200) + +#define AR531XPLUS_LB_RX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0400) +#define AR531XPLUS_LB_RXEN 0x01 + +#define AR531XPLUS_LB_RX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0404) +#define AR531XPLUS_LB_RX_DESC_PTR (AR531XPLUS_LOCAL + 0x0408) + +#define AR531XPLUS_LB_INT_STATUS (AR531XPLUS_LOCAL + 0x0500) +#define AR531XPLUS_INT_TX_DESC 0x0001 +#define AR531XPLUS_INT_TX_OK 0x0002 +#define AR531XPLUS_INT_TX_ERR 0x0004 +#define AR531XPLUS_INT_TX_EOF 0x0008 +#define AR531XPLUS_INT_RX_DESC 0x0010 +#define AR531XPLUS_INT_RX_OK 0x0020 +#define AR531XPLUS_INT_RX_ERR 0x0040 +#define AR531XPLUS_INT_RX_EOF 0x0080 +#define AR531XPLUS_INT_TX_TRUNC 0x0100 +#define AR531XPLUS_INT_TX_STARVE 0x0200 +#define AR531XPLUS_INT_LB_TIMEOUT 0x0400 +#define AR531XPLUS_INT_LB_ERR 0x0800 +#define AR531XPLUS_INT_MBOX_WR 0x1000 +#define AR531XPLUS_INT_MBOX_RD 0x2000 + +/* Bit definitions for INT MASK are the same as INT_STATUS */ +#define AR531XPLUS_LB_INT_MASK (AR531XPLUS_LOCAL + 0x0504) + +#define AR531XPLUS_LB_INT_EN (AR531XPLUS_LOCAL + 0x0508) +#define AR531XPLUS_LB_MBOX (AR531XPLUS_LOCAL + 0x0600) + + + +/* + * IR Interface Registers + */ +#define AR531XPLUS_IR_PKTDATA (AR531XPLUS_IR + 0x0000) + +#define AR531XPLUS_IR_PKTLEN (AR531XPLUS_IR + 0x07fc) /* 0 - 63 */ + +#define AR531XPLUS_IR_CONTROL (AR531XPLUS_IR + 0x0800) +#define AR531XPLUS_IRCTL_TX 0x00000000 /* use as tranmitter */ +#define AR531XPLUS_IRCTL_RX 0x00000001 /* use as receiver */ +#define AR531XPLUS_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ +#define AR531XPLUS_IRCTL_SAMPLECLK_SHFT 1 +#define AR531XPLUS_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ +#define AR531XPLUS_IRCTL_OUTPUTCLK_SHFT 14 + +#define AR531XPLUS_IR_STATUS (AR531XPLUS_IR + 0x0804) +#define AR531XPLUS_IRSTS_RX 0x00000001 /* receive in progress */ +#define AR531XPLUS_IRSTS_TX 0x00000002 /* transmit in progress */ + +#define AR531XPLUS_IR_CONFIG (AR531XPLUS_IR + 0x0808) +#define AR531XPLUS_IRCFG_INVIN 0x00000001 /* invert input polarity */ +#define AR531XPLUS_IRCFG_INVOUT 0x00000002 /* invert output polarity */ +#define AR531XPLUS_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ +#define AR531XPLUS_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ +#define AR531XPLUS_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ +#define AR531XPLUS_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ +#define AR531XPLUS_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ +#define AR531XPLUS_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ +#define AR531XPLUS_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ + +/* + * PCI memory constants: Memory area 1 and 2 are the same size - + * (twice the PCI_TLB_PAGE_SIZE). The definition of + * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine + * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size + * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. + */ + +#define CPU_TO_PCI_MEM_BASE1 0xE0000000 +#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) + + +/* TLB attributes for PCI transactions */ + +#define PCI_MMU_PAGEMASK 0x00003FFF +#define MMU_PAGE_UNCACHED 0x00000010 +#define MMU_PAGE_DIRTY 0x00000004 +#define MMU_PAGE_VALID 0x00000002 +#define MMU_PAGE_GLOBAL 0x00000001 +#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\ + MMU_PAGE_VALID|MMU_PAGE_GLOBAL) +#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */ +#define PCI_MEMORY_SPACE1_PHYS 0x80000000 +#define PCI_TLB_PAGE_SIZE 0x01000000 +#define TLB_HI_MASK 0xFFFFE000 +#define TLB_LO_MASK 0x3FFFFFFF +#define PAGEMASK_SHIFT 11 +#define TLB_LO_SHIFT 6 + +#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */ + +#define HOST_PCI_DEV_ID 3 +#define HOST_PCI_MBAR0 0x10000000 +#define HOST_PCI_MBAR1 0x20000000 +#define HOST_PCI_MBAR2 0x30000000 + +#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 +#define PCI_DEVICE_MEM_SPACE 0x800000 + + +typedef unsigned int AR531X_REG; + +#define sysRegRead(phys) \ + (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) + +#define sysRegWrite(phys, val) \ + ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) + + + +/* + * This is board-specific data that is stored in a "fixed" location in flash. + * It is shared across operating systems, so it should not be changed lightly. + * The main reason we need it is in order to extract the ethernet MAC + * address(es). + */ +struct ar531x_boarddata { + u32 magic; /* board data is valid */ +#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ + u16 cksum; /* checksum (starting with BD_REV 2) */ + u16 rev; /* revision of this struct */ +#define BD_REV 4 + char boardName[64]; /* Name of board */ + u16 major; /* Board major number */ + u16 minor; /* Board minor number */ + u32 config; /* Board configuration */ +#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ +#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ +#define BD_UART1 0x00000004 /* UART1 is stuffed */ +#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ +#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ +#define BD_SYSLED 0x00000020 /* System LED stuffed */ +#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ +#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ +#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ +#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ +#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ +#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ +#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ +#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ +#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ +#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ +#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ +#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ + u16 resetConfigGpio; /* Reset factory GPIO pin */ + u16 sysLedGpio; /* System LED GPIO pin */ + + u32 cpuFreq; /* CPU core frequency in Hz */ + u32 sysFreq; /* System frequency in Hz */ + u32 cntFreq; /* Calculated C0_COUNT frequency */ + + u8 wlan0Mac[6]; + u8 enet0Mac[6]; + u8 enet1Mac[6]; + + u16 pciId; /* Pseudo PCIID for common code */ + u16 memCap; /* cap bank1 in MB */ + + /* version 3 */ + u8 wlan1Mac[6]; /* (ar5212) */ +}; + +#endif + +#endif /* AR531X_H */ diff --git a/package/fonera-mp3-drv/src/ar531xlnx.h b/package/fonera-mp3-drv/src/ar531xlnx.h new file mode 100644 index 000000000..fe0333f55 --- /dev/null +++ b/package/fonera-mp3-drv/src/ar531xlnx.h @@ -0,0 +1,140 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. + */ + +/* + * This file contains definitions needed in order to compile + * AR531X products for linux. Definitions that are largely + * AR531X-specific and independent of operating system belong + * in ar531x.h rather than this file. + */ +#ifndef __AR531XLNX_H +#define __AR531XLNX_H +#include "ar531x.h" + +#define AR531X_HIGH_PRIO 0x10 +#define AR531X_MISC_IRQ_BASE 0x20 +#define AR531X_GPIO_IRQ_BASE 0x30 + +/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ +#ifndef CONFIG_AR531X_COBRA +#define CONFIG_AR531X_COBRA 0 +#endif + +#if CONFIG_AR531X_COBRA +#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 +#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ +#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ +#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ +#define AR531X_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ +#define AR531X_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ +#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ +#else +#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 +#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ +#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ +#define AR531X_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ +#define AR531X_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ +#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ +#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ +#endif + +/* Miscellaneous interrupts, which share IP6 or IP2 */ +#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 +#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 +#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 +#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 +#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 +#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 +#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 +#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 +#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 +#define AR531X_MISC_IRQ_COUNT 9 + +/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ +#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0 +#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1 +#define AR531X_GPIO_IRQ_COUNT 9 + +#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr) +//#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr) +#define UNMAPPED_TO_PHYS(vaddr) PHYSADDR(vaddr) +#define IS_UNMAPPED_VADDR(vaddr) \ + ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1)) + +/* IOCTL commands for /proc/ar531x */ +#define AR531X_CTRL_DO_BREAKPOINT 1 +#define AR531X_CTRL_DO_MADWIFI 2 + +/* + * Definitions for operating system portability. + * These are vxWorks-->Linux translations. + */ +#define LOCAL static +#define BOOL int +#define TRUE 1 +#define FALSE 0 +#define UINT8 u8 +#define UINT16 u16 +#define UINT32 u32 +#define PRINTF printk +#if /* DEBUG */ 1 +#define DEBUG_PRINTF printk +#define printf printk +#define INLINE +#else +DEBUG_PRINTF while (0) printk +#define INLINE inline +#endif +#define sysUDelay(usecs) udelay(usecs) +#define sysMsDelay(msecs) mdelay(msecs) +typedef volatile UINT8 *VIRT_ADDR; +#define MALLOC(sz) kmalloc(sz, GFP_KERNEL) +#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC) +#define FREE(ptr) kfree((void *)ptr) +#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0) +#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0) +#define ASSERT(x) BSP_BUG_ON(!(x)) + +extern struct ar531x_boarddata *ar531x_board_configuration; +extern char *ar531x_radio_configuration; +extern char *enet_mac_address_get(int MACUnit); + +extern void kgdbInit(void); +extern int kgdbEnabled(void); +extern void breakpoint(void); +extern int kgdbInterrupt(void); +extern unsigned int ar531x_cpu_frequency(void); +extern unsigned int ar531x_sys_frequency(void); + +/* GPIO support */ +extern struct irqaction spurious_gpio; +extern unsigned int gpioIntMask; +extern void ar531x_gpio_intr_init(int irq_base); +extern void ar531x_gpio_ctrl_output(int gpio); +extern void ar531x_gpio_ctrl_input(int gpio); +extern void ar531x_gpio_set(int gpio, int val); +extern int ar531x_gpio_get(int gpio); +extern void ar531x_gpio_intr_enable(unsigned int irq); +extern void ar531x_gpio_intr_disable(unsigned int irq); + +/* Watchdog Timer support */ +extern int watchdog_start(unsigned int milliseconds); +extern int watchdog_stop(void); +extern int watchdog_is_enabled(void); +extern unsigned int watchdog_min_timer_reached(void); +extern void watchdog_notify_alive(void); + +#define A_DATA_CACHE_INVAL(start, length) \ + dma_cache_inv((UINT32)(start),(length)) + +#define sysWbFlush() mb() + +#define intDisable(x) cli() +#define intEnable(x) sti() + +#endif /* __AR531XLNX_H */ diff --git a/package/fonera-mp3-drv/src/mp3_drv.c b/package/fonera-mp3-drv/src/mp3_drv.c new file mode 100644 index 000000000..f2c0dd166 --- /dev/null +++ b/package/fonera-mp3-drv/src/mp3_drv.c @@ -0,0 +1,308 @@ +/* +* a.lp_mp3 - VS1011B driver for Fonera +* Copyright (c) 2007 phrozen.org - John Crispin <john@phrozen.org> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA +* +* Feedback, Bugs... john@phrozen.org +* +*/ + + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/genhd.h> + +// do we want debuging info ? +#if 0 +#define DBG(x) x +#else +#define DBG(x) +#endif + +#define MP3_CHUNK_SIZE 4096 +#define MP3_BUFFERING 0 +#define MP3_PLAYING 1 +#define MP3_BUFFER_FINISHED 2 +#define MP3_PLAY_FINISHED 3 +typedef struct _MP3_DATA{ + unsigned char mp3[MP3_CHUNK_SIZE]; + unsigned char state; +} MP3_DATA; + +#define IOCTL_MP3_INIT 0x01 +#define IOCTL_MP3_RESET 0x02 +#define IOCTL_MP3_SETVOLUME 0x03 +#define IOCTL_MP3_GETVOLUME 0x04 + +typedef struct _AUDIO_DATA{ + unsigned int bitrate; + unsigned int sample_rate; + unsigned char is_stereo; +}AUDIO_DATA; +#define IOCTL_MP3_GETAUDIODATA 0x05 +#define IOCTL_MP3_CLEARBUFFER 0x06 +#define IOCTL_MP3_PLAY 0x07 + +typedef struct _MP3_BEEP{ + unsigned char freq; + unsigned int ms; +} MP3_BEEP; +#define IOCTL_MP3_BEEP 0x08 +#define IOCTL_MP3_END_REACHED 0x09 +#define IOCTL_MP3_BASS 0x10 + +#define CRYSTAL12288 0x9800 +#define CRYSTAL24576 0x0 + +#define DEV_NAME "mp3" +#define DEV_MAJOR 196 +#define MAX_MP3_COUNT 1 + +typedef struct _mp3_inf{ + unsigned char is_open; +} mp3_inf; +static mp3_inf mp3_info[MAX_MP3_COUNT]; + +#define MP3_BUFFER_SIZE (128 * 1024) +unsigned char mp3_buffer[MP3_BUFFER_SIZE]; + +static unsigned long int mp3_buffer_offset_write = 0; +static unsigned long int mp3_buffer_offset_read = 0; +static unsigned char mp3_buffering_status = MP3_BUFFERING; +static unsigned long int mp3_data_in_buffer = 0; +static int mp3_thread = 0; +unsigned int crystal_freq; + +#include "vs10xx.c" + +static wait_queue_head_t wq; +static DECLARE_COMPLETION(mp3_exit); + +static int mp3_playback_thread(void *data){ + int j; + unsigned long timeout; + printk("started kthread\n"); + daemonize("kmp3"); + while(mp3_buffering_status != MP3_PLAY_FINISHED){ + if((mp3_buffering_status == MP3_PLAYING) || (mp3_buffering_status == MP3_BUFFER_FINISHED)){ + while(VS1011_NEEDS_DATA){ + if(mp3_buffer_offset_read == MP3_BUFFER_SIZE){ + mp3_buffer_offset_read = 0; + } + + if(mp3_data_in_buffer == 0){ + if(mp3_buffering_status == MP3_BUFFER_FINISHED){ + printk("mp3_drv.ko : finished playing\n"); + mp3_buffering_status = MP3_PLAY_FINISHED; + } else { + printk("mp3_drv.ko : buffer empty ?\n"); + if(mp3_buffering_status != MP3_PLAY_FINISHED){ + } + } + } else { + for(j = 0; j < 32; j++){ + VS1011_send_SDI(mp3_buffer[mp3_buffer_offset_read + j]); + } + mp3_buffer_offset_read += 32; + mp3_data_in_buffer -= 32; + } + } + } + timeout = 1; + timeout = wait_event_interruptible_timeout(wq, (timeout==0), timeout); + } + complete_and_exit(&mp3_exit, 0); +} + +static ssize_t module_write(struct file * file, const char * buffer, size_t count, loff_t *offset){ + MP3_DATA mp3_data; + + copy_from_user((char*) &mp3_data, buffer, sizeof(MP3_DATA)); + + if(mp3_data.state == MP3_BUFFER_FINISHED){ + mp3_buffering_status = MP3_BUFFER_FINISHED; + DBG(printk("mp3_drv.ko : file end reached\n")); + return 1; + } + + if(mp3_data.state == MP3_PLAY_FINISHED){ + mp3_buffering_status = MP3_PLAY_FINISHED; + mp3_data_in_buffer = 0; + DBG(printk("mp3_drv.ko : stop playing\n")); + return 1; + } + + if(mp3_data_in_buffer + MP3_CHUNK_SIZE >= MP3_BUFFER_SIZE){ + DBG(printk("mp3_drv.ko : buffer is full? %ld\n", mp3_data_in_buffer);) + return 0; + } + + if(mp3_buffer_offset_write == MP3_BUFFER_SIZE){ + mp3_buffer_offset_write = 0; + } + + memcpy(&mp3_buffer[mp3_buffer_offset_write], mp3_data.mp3, MP3_CHUNK_SIZE); + mp3_buffer_offset_write += MP3_CHUNK_SIZE; + mp3_buffering_status = mp3_data.state; + mp3_data_in_buffer += MP3_CHUNK_SIZE; + return 1; +} + +static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){ + unsigned int retval = 0; + AUDIO_DATA audio_data; + MP3_BEEP mp3_beep; + DBG(printk("mp3_drv.ko : Ioctl Called (cmd=%d)\n", cmd );) + switch (cmd) { + case IOCTL_MP3_INIT: + crystal_freq = arg; + VS1011_init(crystal_freq, 1); + VS1011_print_registers(); + break; + + case IOCTL_MP3_RESET: + DBG(printk("mp3_drv.ko : doing a sw reset\n");) + VS1011_init(crystal_freq, 0); + VS1011_print_registers(); + VS1011_send_zeros(0x20); + break; + + case IOCTL_MP3_SETVOLUME: + DBG(printk("mp3_drv.ko : setting volume to : %lu\n", arg&0xffff);) + VS1011_set_volume(arg); + break; + + case IOCTL_MP3_GETVOLUME: + retval = VS1011_get_volume(); + DBG(printk("mp3_drv.ko : read volume : %d\n", retval);) + break; + + case IOCTL_MP3_GETAUDIODATA: + DBG(printk("mp3_drv.ko : read audio data\n");) + VS1011_get_audio_data(&audio_data); + copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA)); + break; + + case IOCTL_MP3_CLEARBUFFER: + DBG(printk("mp3_drv.ko : clearing buffer\n");) + mp3_buffer_offset_read = 0; + mp3_buffer_offset_write = 0; + mp3_buffering_status = MP3_PLAY_FINISHED; + mp3_data_in_buffer = 0; + break; + + case IOCTL_MP3_PLAY: + mp3_thread = kernel_thread(mp3_playback_thread, NULL, CLONE_KERNEL); + break; + + case IOCTL_MP3_BEEP: + copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP)); + VS1011_sine(1,mp3_beep.freq); + msDelay(mp3_beep.ms); + VS1011_sine(0,0); + break; + + case IOCTL_MP3_END_REACHED: + if(mp3_buffering_status == MP3_PLAY_FINISHED){ + retval = 1; + } + break; + + case IOCTL_MP3_BASS: + VS1011_set_bass(arg); + break; + + default: + printk("mp3_drv.ko : unknown ioctl\n"); + break; + + } + return retval; +} + +static int module_open(struct inode *inode, struct file *file){ + unsigned int dev_minor = MINOR(inode->i_rdev); + if(dev_minor != 0){ + printk("mp3_drv.ko : trying to access unknown minor device -> %d\n", dev_minor); + return -ENODEV; + } + if(mp3_info[dev_minor].is_open) { + printk("mp3_drv.ko : Device with minor ID %d already in use\n", dev_minor); + return -EBUSY; + } + mp3_info[dev_minor].is_open = 1; + + mp3_buffering_status = MP3_PLAY_FINISHED; + printk("mp3_drv.ko : Minor %d has been opened\n", dev_minor); + return 0; +} + +static int module_close(struct inode * inode, struct file * file){ + unsigned int dev_minor = MINOR(inode->i_rdev); + mp3_info[dev_minor].is_open = 0; + printk("mp3_drv.ko : Minor %d has been closed\n", dev_minor); + mp3_buffering_status = MP3_PLAY_FINISHED; + return 0; +} + +struct file_operations modulemp3_fops = { + write: module_write, + ioctl: module_ioctl, + open: module_open, + release: module_close +}; + +static int __init mod_init(void){ + printk("mp3_drv.ko : VS1011b Driver\n"); + printk("mp3_drv.ko : Made by John '2B|!2B' Crispin (john@phrozen.org)\n"); + printk("mp3_drv.ko : Starting ...\n"); + + if(register_chrdev(DEV_MAJOR, DEV_NAME, &modulemp3_fops)) { + printk( "mp3_drv.ko : Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR); + return( -ENODEV ); + } + + mp3_info[0].is_open = 0; + printk("mp3_drv.ko : Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR); + crystal_freq = CRYSTAL12288; + VS1011_init(crystal_freq, 1); + VS1011_print_registers(); + printk("end of init\n"); + init_waitqueue_head(&wq); + printk("wait queue started\n"); + return 0; +} + +static void __exit mod_exit(void){ + printk( "mp3_drv.ko : Cleanup\n" ); + unregister_chrdev(DEV_MAJOR, DEV_NAME); +} + +module_init (mod_init); +module_exit (mod_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("K. John '2B|!2B' Crispin"); +MODULE_DESCRIPTION("vs1011 Driver for Fox Board"); + + + diff --git a/package/fonera-mp3-drv/src/vs10xx.c b/package/fonera-mp3-drv/src/vs10xx.c new file mode 100644 index 000000000..e7b7f68c1 --- /dev/null +++ b/package/fonera-mp3-drv/src/vs10xx.c @@ -0,0 +1,328 @@ +/* + * a.lp_mp3 - VS1011B driver for Fonera + * Copyright (c) 2007 phrozen.org - John Crispin <john@phrozen.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA + * + * Feedback, Bugs.... mail john@phrozen.org + * + */ + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/system.h> +#include <asm/irq.h> +#include "ar531xlnx.h" + +#define AR5315_DSLBASE 0xB1000000 +#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088) +#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090) +#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098) +#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0) + +#define GPIO_0 1<<0 +#define GPIO_1 1<<1 +#define GPIO_2 1<<2 +#define GPIO_3 1<<3 +#define GPIO_4 1<<4 +#define GPIO_6 1<<6 +#define GPIO_7 1<<7 + +#define DREQ ((unsigned int)GPIO_7) +#define SCK ((unsigned int)GPIO_1) +#define SI ((unsigned int)GPIO_4) +#define BSYNC ((unsigned int)GPIO_3) +#define CS ((unsigned int)GPIO_0) +#define SO ((unsigned int)GPIO_6) +#define RES ((unsigned int)GPIO_2) + +#define REG_MODE 0x0 +#define REG_STATUS 0x1 +#define REG_BASS 0x2 +#define REG_CLOCKF 0x3 +#define REG_DECODETIME 0x4 +#define REG_AUDATA 0x5 +#define REG_WRAM 0x6 +#define REG_WRAMADDR 0x7 +#define REG_HDAT0 0x8 +#define REG_HDAT1 0x9 +#define REG_A1ADDR 0xa +#define REG_VOL 0xb +#define REG_A1CTRL0 0xc +#define REG_A1CTRL1 0xd +#define REG_A1CTRL2 0xe + +#define VS1011_NEEDS_DATA spi_get_bit(DREQ) +#define VS1011_NEEDS_NO_DATA (spi_get_bit(DREQ)== 0x00) +#define VS1011_WHILE_NEEDS_NO_DATA while(spi_get_bit(DREQ)== 0x00){} + +#define VS_CS_LO spi_clear_bit(CS) +#define VS_CS_HI spi_set_bit(CS) + +#define VS_BSYNC_LO spi_clear_bit(BSYNC) +#define VS_BSYNC_HI spi_set_bit(BSYNC) + +#define VS_RESET_LO spi_clear_bit(RES) +#define VS_RESET_HI spi_set_bit(RES) + +#define VS1011_READ SPI_io_vs1011b(0x03) +#define VS1011_WRITE SPI_io_vs1011b(0x02) + +void msDelay(int ms) { + int i,a; + int delayvar=10; + + for (a=0;a<ms;a++) { + for (i=0;i<33084;i++) { + delayvar*=2; + delayvar/=2; + } + } +} + +int spi_get_bit(unsigned int pin){ + return ((sysRegRead(AR5315_GPIO_DI)&pin)?(1):(0)); +} + +void spi_set_bit(unsigned int pin){ + sysRegWrite(AR5315_GPIO_DO, (sysRegRead(AR5315_GPIO_DO) | pin)); +} + +void spi_clear_bit(unsigned int pin){ + sysRegWrite(AR5315_GPIO_DO, (sysRegRead(AR5315_GPIO_DO) & ~pin)); +} + +void SPI_clock_vs1011b(void){ + spi_clear_bit(SCK); + spi_set_bit(SCK); +} + +unsigned char SPI_io_vs1011b(unsigned char byte){ + int i; + unsigned char this_bit; + unsigned char byte_out = 0; + for(i = 7; i>=0; i--){ + if(byte & (1<<i)){ + this_bit = 1; + } else { + this_bit = 0; + } + if(this_bit){ + spi_set_bit(SI); + } else { + spi_clear_bit(SI); + } + SPI_clock_vs1011b(); + byte_out += spi_get_bit(SO)<<i; + } + return byte_out; +} + +void SPI_init_vs1011(void){ + sysRegWrite(AR5315_GPIO_CR, (sysRegRead(AR5315_GPIO_CR) | SI | SCK | CS | BSYNC | RES) & ~(SO|DREQ)); + spi_clear_bit(SCK); + spi_clear_bit(SI); + VS_CS_HI; + VS_BSYNC_HI; +} + +void VS1011_send_SCI(unsigned char reg, unsigned int data){ + VS_CS_LO; + VS1011_WRITE; + SPI_io_vs1011b(reg); + SPI_io_vs1011b((data>>8)&0xff); + SPI_io_vs1011b(data&0xff); + VS_CS_HI; +} + +unsigned int VS1011_read_SCI(unsigned char reg){ + unsigned int data; + VS_CS_LO; + VS1011_READ; + SPI_io_vs1011b(reg); + data = 0; + data = SPI_io_vs1011b(0x00); + data <<= 8; + data += SPI_io_vs1011b(0x00); + VS_CS_HI; + return data; +} + +void VS1011_send_SDI(unsigned char byte){ + int i; + VS_BSYNC_LO; + for(i = 7; i>=0; i--){ + if(byte & (1<<i)){ + spi_set_bit(SI); + + } else { + spi_clear_bit(SI); + } + spi_clear_bit(SCK); + spi_set_bit(SCK); + } + VS_BSYNC_HI; +} + +void VS1011_send_SDI_32(unsigned char* data){ + int i; + VS1011_WHILE_NEEDS_NO_DATA; + for(i=0; i<32; i++){ + VS1011_send_SDI(data[i]); + } +} + +void VS1011_send_zeros(unsigned char count){ + do{ + VS1011_send_SDI(0x0); + count--; + }while(count); +} + +void VS1011_set_volume(unsigned int vol){ + VS1011_send_SCI(REG_VOL, vol); +} + +void VS1011_SW_reset(unsigned int _crystal_freq){ + unsigned int regval = 0x0804; + unsigned long int i = 0; + msDelay(100); + VS1011_send_zeros(32); + VS1011_send_SCI(REG_MODE, regval); + msDelay(10); + while((VS1011_NEEDS_NO_DATA) && (i++<0xffff)){}; + VS1011_send_SCI(REG_CLOCKF, _crystal_freq); + VS1011_send_zeros(16); + VS1011_set_volume(0x00); +} + +void VS1011_HW_reset(void){ + + VS_RESET_LO; + msDelay(1); + VS_RESET_HI; + msDelay(1); +} + +void VS1011_init(unsigned int _crystal_freq, unsigned char hw){ + if(hw){ + SPI_init_vs1011(); + } + printk("mp3_drv.ko : Init start\n"); + if(hw){ + VS1011_HW_reset(); + } + VS1011_SW_reset(_crystal_freq); + printk("mp3_drv.ko : init_ok\n"); +} + +void VS1011_sine(unsigned char state, unsigned char freq){ + VS1011_send_zeros(16); + if(state == 0x01){ + VS1011_send_SDI(0x53); + VS1011_send_SDI(0xEF); + VS1011_send_SDI(0x6E); + VS1011_send_SDI(freq); + VS1011_send_zeros(0x04); + } else { + VS1011_send_SDI(0x45); + VS1011_send_SDI(0x78); + VS1011_send_SDI(0x69); + VS1011_send_SDI(0x74); + VS1011_send_zeros(0x04); + } +} + +unsigned int VS1011_get_volume(void){ + return VS1011_read_SCI(REG_VOL); +} + +unsigned int VS1011_get_decode_time(void){ + return VS1011_read_SCI(REG_DECODETIME); +} + +const unsigned int sample_rate_values[] = {0, 44100, 48000, 32000, 22050, 24000, 16000, 11025, 12000, 8000}; + +void VS1011_get_audio_data(AUDIO_DATA* audio){ + unsigned int audata = VS1011_read_SCI(REG_AUDATA); + audio->sample_rate = sample_rate_values[(audata&0x1E00)>>9]; + audio->bitrate = audata&0x1FF; + audio->is_stereo = (audata&0x8000)>>15; +} + +void VS1011_print_registers(void){ + unsigned char i; + for(i = 0; i< 14; i++){ + unsigned int regval = VS1011_read_SCI(i); + printk("mp3_drv.ko : %d \n", regval); + } +} + +void VS1011_volume(unsigned char left, unsigned char right){ + unsigned int regval = left; + regval <<=8; + regval += right; + VS1011_send_SCI(REG_VOL, regval); +} + +void VS1011_set_bass(unsigned int regval){ + VS1011_send_SCI(REG_BASS, regval); +} + +void VS1011_set_reg(unsigned int reg, unsigned int regval){ + VS1011_send_SCI(reg, regval); +} + +/* +int vs_test(void) { + SPI_init_vs1011(); + printk("%u\n", *R_GEN_CONFIG); + VS1001_init(_crystal_freq); + VS1001_print_registers(); + VS1001_volume(0x30, 0x30); + msDelay(1000); + VS1001_sine(1, 0x30); + msDelay(1000); + VS1001_sine(0, 0); + VS1001_send_zeros(0x20); + msDelay(1000); + VS1001_sine(1, 0x30); + msDelay(1000); + VS1001_sine(0, 0); + VS1001_send_zeros(0x20); + msDelay(1000); + VS1001_sine(1, 0x30); + msDelay(1000); + VS1001_sine(0, 0); + + AUDIO_DATA a; + VS1001_get_audio_data(&a); + printk("mp3_drv.ko : rate : %d, bit : %d, stereo : %d \n", a.sample_rate, a.bitrate, a.is_stereo); + VS1001_SW_reset(_crystal_freq); + return 0; +}*/ + |