1 files changed, 0 insertions, 119 deletions
diff --git a/package/comgt/files-old/3g.sh b/package/comgt/files-old/3g.sh
deleted file mode 100644
index 616beec4c..000000000
--- a/package/comgt/files-old/3g.sh
+++ /dev/null
@@ -1,119 +0,0 @@
-set_3g_led() {
-	# set on WRT54G3G only
-	[ -f /proc/diag/model ] || return 0
-	grep -q "WRT54G3G" /proc/diag/model >/dev/null || return 0
-	echo "$1" > /proc/diag/led/3g_green
-	echo "$2" > /proc/diag/led/3g_blue
-	grep -q "WRT54G3G$" /proc/diag/model >/dev/null || return 0
-	echo "$3" > /proc/diag/led/3g_blink
-}
-
-scan_3g() {
-	local device
-	config_get device "$1" device
-
-	# try to figure out the device if it's invalid
-	[ -n "$device" -a -e "$device" ] || {
-		for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
-			[ -e "$device" ] && {
-				config_set "$1" device "$device"
-				break
-			}
-		done
-	}
-
-	# enable 3G with the 3G button by default
-	local button
-	config_get button "$1" button
-	[ -z "$button" ] && {
-		config_set "$1" button 1
-	}
-}
-
-stop_interface_3g() {
-	stop_interface_ppp "$1"
-	set_3g_led 0 0 0
-	killall gcom >/dev/null 2>/dev/null
-}
-
-setup_interface_3g() {
-	local iface="$1"
-	local config="$2"
-	local chat="/etc/chatscripts/3g.chat"
-
-	local device
-	config_get device "$config" device
-
-	local maxwait
-	config_get maxwait "$config" maxwait
-	maxwait=${maxwait:-20}
-	while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
-		maxwait=$(($maxwait - 1))
-		sleep 1
-	done
-
-	for module in slhc ppp_generic ppp_async; do
-		/sbin/insmod $module 2>&- >&-
-	done
-
-	local apn
-	config_get apn "$config" apn
-
-	local service
-	config_get service "$config" service
-
-	local pincode
-	config_get pincode "$config" pincode
-
-	local mtu
-	config_get mtu "$config" mtu
-
-	set_3g_led 1 0 1
-
-	# figure out hardware specific commands for the card
-	case "$service" in
-		cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
-	*)
-		cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
-		if echo "$cardinfo" | grep Novatel; then
-			case "$service" in
-				umts_only) CODE=2;;
-				gprs_only) CODE=1;;
-				*) CODE=0;;
-			esac
-			mode="AT\$NWRAT=${CODE},2"
-		elif echo "$cardinfo" | grep Option; then
-			case "$service" in
-				umts_only) CODE=1;;
-				gprs_only) CODE=0;;
-				*) CODE=3;;
-			esac
-			mode="AT_OPSYS=${CODE}"
-		fi
-		# Don't assume Option to be default as it breaks with Huawei Cards/Sticks
-
-		test -z "$pincode" || {
-			PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-				echo "$config(3g): Failed to set the PIN code."
-				set_3g_led 0 0 0
-				return 1
-			}
-		}
-		test -z "$mode" || {
-			MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
-		}
-	esac
-	set_3g_led 1 0 0
-
-	config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
-	start_pppd "$config" \
-		noaccomp \
-		nopcomp \
-		novj \
-		nobsdcomp \
-		noauth \
-		lock \
-		crtscts \
-		${mtu:+mtu $mtu mru $mtu} \
-		115200 "$device"
-}