diff options
Diffstat (limited to 'openwrt/target')
30 files changed, 5456 insertions, 1 deletions
diff --git a/openwrt/target/linux/package/Makefile b/openwrt/target/linux/package/Makefile index f34ad9a8a..adce4d4ee 100644 --- a/openwrt/target/linux/package/Makefile +++ b/openwrt/target/linux/package/Makefile @@ -5,10 +5,17 @@ package-$(BR2_PACKAGE_KMOD_FUSE) += fuse package-$(BR2_PACKAGE_KMOD_MINI_FO) += mini_fo package-$(BR2_PACKAGE_KMOD_SHFS) += shfs package-$(BR2_PACKAGE_KMOD_OPENSWAN) += openswan + +ifeq ($(BOARD),brcm) +package-y += nvram openwrt + ifeq ($(LINUX_VERSION),2.4.30) package-$(BR2_PACKAGE_KMOD_WLCOMPAT) += wlcompat endif +nvram-compile: openwrt-compile +endif + all: compile install clean: $(patsubst %,%-clean,$(package-) $(package-y) $(package-m)) compile: $(patsubst %,%-compile,$(package-y) $(package-m)) diff --git a/openwrt/target/linux/package/nvram/Makefile b/openwrt/target/linux/package/nvram/Makefile new file mode 100644 index 000000000..da67ffa7f --- /dev/null +++ b/openwrt/target/linux/package/nvram/Makefile @@ -0,0 +1,33 @@ +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=nvram +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME) + +include $(TOPDIR)/package/rules.mk + +BR2_PACKAGE_NVRAM:=y # does not depend on menuconfig +$(eval $(call PKG_template,NVRAM,nvram,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH))) + +$(PKG_BUILD_DIR)/.prepared: + mkdir -p $(PKG_BUILD_DIR) + cp -a ./src/* $(PKG_BUILD_DIR) + touch $@ + +$(PKG_BUILD_DIR)/.built: + $(MAKE) -C $(PKG_BUILD_DIR) \ + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS) -I $(STAGING_DIR)/usr/include" + touch $@ + +$(IPKG_NVRAM): + mkdir -p $(IDIR_NVRAM)/usr/lib + cp $(PKG_BUILD_DIR)/*.so $(IDIR_NVRAM)/usr/lib + mkdir -p $(IDIR_NVRAM)/usr/sbin + cp $(PKG_BUILD_DIR)/nvram $(IDIR_NVRAM)/usr/sbin + $(RSTRIP) $(IDIR_NVRAM) + $(IPKG_BUILD) $(IDIR_NVRAM) $(PACKAGE_DIR) + diff --git a/openwrt/target/linux/package/nvram/ipkg/nvram.control b/openwrt/target/linux/package/nvram/ipkg/nvram.control new file mode 100644 index 000000000..bb2581303 --- /dev/null +++ b/openwrt/target/linux/package/nvram/ipkg/nvram.control @@ -0,0 +1,7 @@ +Package: nvram +Priority: optional +Section: sys +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: NVRAM utility and libraries for Broadcom hardware + diff --git a/openwrt/target/linux/package/nvram/src/Makefile b/openwrt/target/linux/package/nvram/src/Makefile new file mode 100644 index 000000000..376c2b7de --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/Makefile @@ -0,0 +1,22 @@ +# $Id$ + +EXTRA_CFLAGS := -c -I. -I../include +LIBSHARED_OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o +LIBNVRAM_OBJS := nvram_linux.o nvram_convert.o + +all: libshared.so libnvram.so nvram + +%.o: %.c + $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $^ + +libshared.so: $(LIBSHARED_OBJS) + $(CC) -shared -o $@ $^ + +libnvram.so: $(LIBNVRAM_OBJS) + $(CC) -shared -o $@ $^ + +nvram: main.o + $(CC) -o $@ $^ -L. -lnvram + +clean: + rm -f *.o *.so nvram diff --git a/openwrt/target/linux/package/nvram/src/bcmtimer.h b/openwrt/target/linux/package/nvram/src/bcmtimer.h new file mode 100644 index 000000000..3db9e624f --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/bcmtimer.h @@ -0,0 +1,42 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Low resolution timer interface. Timer handlers may be called + * in a deferred manner in a different task context after the + * timer expires or in the task context from which the timer + * was created, depending on the implementation. + * + * $Id$ + */ +#ifndef __bcmtimer_h__ +#define __bcmtimer_h__ + +/* ANSI headers */ +#include <time.h> + +/* timer ID */ +typedef unsigned int bcm_timer_module_id; +typedef unsigned int bcm_timer_id; + +/* timer callback */ +typedef void (*bcm_timer_cb)(bcm_timer_id id, int data); + +/* OS-independant interfaces, applications should call these functions only */ +int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id); +int bcm_timer_module_cleanup(bcm_timer_module_id module_id); +int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable); +int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id); +int bcm_timer_delete(bcm_timer_id timer_id); +int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value); +int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value); +int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data); +int bcm_timer_cancel(bcm_timer_id timer_id); +int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec); + +#endif /* #ifndef __bcmtimer_h__ */ diff --git a/openwrt/target/linux/package/nvram/src/defaults.c b/openwrt/target/linux/package/nvram/src/defaults.c new file mode 100644 index 000000000..119eaac72 --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/defaults.c @@ -0,0 +1,179 @@ +/* + * Router default NVRAM values + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <epivers.h> +#include <string.h> +#include <bcmnvram.h> +#include <typedefs.h> +#include <wlioctl.h> + +#define XSTR(s) STR(s) +#define STR(s) #s + +struct nvram_tuple router_defaults[] = { + /* OS parameters */ + { "os_name", "", 0 }, /* OS name string */ + { "os_version", EPI_VERSION_STR, 0 }, /* OS revision */ + { "os_date", __DATE__, 0 }, /* OS date */ + + /* Miscellaneous parameters */ + { "timer_interval", "3600", 0 }, /* Timer interval in seconds */ + { "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */ + { "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */ + { "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */ + { "upnp_enable", "0", 0 }, /* Start UPnP */ + { "ezc_enable", "1", 0 }, /* Enable EZConfig updates */ + { "ezc_version", "1", 0 }, /* EZConfig version */ + { "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/ + { "os_server", "", 0 }, /* URL for getting upgrades */ + { "stats_server", "", 0 }, /* URL for posting stats */ + { "console_loglevel", "1", 0 }, /* Kernel panics only */ + + /* Big switches */ + { "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */ + { "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */ + + { "log_ipaddr", "", 0 }, /* syslog recipient */ + + /* LAN H/W parameters */ + { "lan_ifname", "", 0 }, /* LAN interface name */ + { "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */ + { "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */ + { "lan_hwaddr", "", 0 }, /* LAN interface MAC address */ + + /* LAN TCP/IP parameters */ + { "lan_proto", "dhcp", 0 }, /* [static|dhcp] */ + { "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */ + { "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */ + { "lan_stp", "0", 0 }, /* LAN spanning tree protocol */ + { "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ + { "lan_domain", "", 0 }, /* LAN domain name */ + { "lan_lease", "86400", 0 }, /* LAN lease time in seconds */ + + /* WAN H/W parameters */ + { "wan_ifname", "", 0 }, /* WAN interface name */ + { "wan_ifnames", "", 0 }, /* WAN interface names */ + { "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */ + { "wan_hwaddr", "", 0 }, /* WAN interface MAC address */ + + /* WAN TCP/IP parameters */ + { "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */ + { "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */ + { "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */ + { "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */ + { "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */ + { "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ + { "wan_hostname", "", 0 }, /* WAN hostname */ + { "wan_domain", "", 0 }, /* WAN domain name */ + { "wan_lease", "86400", 0 }, /* WAN lease time in seconds */ + + /* PPPoE parameters */ + { "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */ + { "wan_pppoe_username", "", 0 }, /* PPP username */ + { "wan_pppoe_passwd", "", 0 }, /* PPP password */ + { "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */ + { "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */ + { "wan_pppoe_demand", "0", 0 }, /* Dial on demand */ + { "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */ + { "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */ + { "wan_pppoe_service", "", 0 }, /* PPPoE service name */ + { "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */ + + /* Misc WAN parameters */ + { "wan_desc", "", 0 }, /* WAN connection description */ + { "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */ + { "wan_primary", "0", 0 }, /* Primary wan connection */ + + { "wan_unit", "0", 0 }, /* Last configured connection */ + + /* Filters */ + { "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ + { "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ + { "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */ + + /* Port forwards */ + { "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */ + { "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */ + { "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */ + + /* DHCP server parameters */ + { "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */ + { "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */ + { "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */ + { "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */ + + /* Web server parameters */ + { "http_username", "", 0 }, /* Username */ + { "http_passwd", "admin", 0 }, /* Password */ + { "http_wanport", "", 0 }, /* WAN port to listen on */ + { "http_lanport", "80", 0 }, /* LAN port to listen on */ + + /* Wireless parameters */ + { "wl_ifname", "", 0 }, /* Interface name */ + { "wl_hwaddr", "", 0 }, /* MAC address */ + { "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */ + { "wl_corerev", "", 0 }, /* Current core revision */ + { "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */ + { "wl_radioids", "", 0 }, /* List of radio IDs */ + { "wl_ssid", "OpenWrt", 0 }, /* Service set ID (network name) */ + { "wl_country", "", 0 }, /* Country (default obtained from driver) */ + { "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */ + { "wl_closed", "0", 0 }, /* Closed (hidden) network */ + { "wl_ap_isolate", "0", 0 }, /* AP isolate mode */ + { "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */ + { "wl_lazywds", "0", 0 }, /* Enable "lazy" WDS mode (0|1) */ + { "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ + { "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */ + { "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */ + { "wl_key", "1", 0 }, /* Current WEP key */ + { "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ + { "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ + { "wl_channel", "11", 0 }, /* Channel number */ + { "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */ + { "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */ + { "wl_frag", "2346", 0 }, /* Fragmentation threshold */ + { "wl_rts", "2347", 0 }, /* RTS threshold */ + { "wl_dtim", "1", 0 }, /* DTIM period */ + { "wl_bcn", "100", 0 }, /* Beacon interval */ + { "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */ + { "wl_net_mode", "mixed", 0 }, /* 54g mode */ + { "wl_gmode", "6", 0 }, /* 54g mode */ + { "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */ + { "wl_afterburner", "auto", 0 }, /* AfterBurner */ + { "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */ + { "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */ + { "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */ + + /* WPA parameters */ + { "security_mode", "open", 0 }, + { "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */ + { "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */ + { "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */ + { "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */ + { "wl_radius_key", "", 0 }, /* RADIUS shared secret */ + { "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */ + { "wl_crypto", "tkip", 0 }, /* WPA data encryption */ + + + { "wl_unit", "0", 0 }, /* Last configured interface */ + + /* Restore defaults */ + { "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */ + + { 0, 0, 0 } +}; diff --git a/openwrt/target/linux/package/nvram/src/linux_timer.c b/openwrt/target/linux/package/nvram/src/linux_timer.c new file mode 100644 index 000000000..0402e4437 --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/linux_timer.c @@ -0,0 +1,738 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Low resolution timer interface linux specific implementation. + * + * $Id$ + */ + +/* +* debug facilities +*/ +#define TIMER_DEBUG 0 +#if TIMER_DEBUG +#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args) +#else +#define TIMERDBG(fmt, args...) +#endif + + +/* + * POSIX timer support for Linux. Taken from linux_timer.c in upnp + */ + +#define __USE_GNU + + +#include <stdlib.h> // for malloc, free, etc. +#include <string.h> // for memset, strncasecmp, etc. +#include <assert.h> // for assert, of course. +#include <signal.h> // for sigemptyset, etc. +#include <stdio.h> // for printf, etc. +#include <sys/time.h> +#include <time.h> + +/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are. + For each expiring timer the code will print the expected time interval and the actual time interval. +#define TIMER_PROFILE +*/ +#undef TIMER_PROFILE + +/* +timer_cancel( ) - cancel a timer +timer_connect( ) - connect a user routine to the timer signal +timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX) +timer_delete( ) - remove a previously created timer (POSIX) +timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX) +timer_getoverrun( ) - return the timer expiration overrun (POSIX) +timer_settime( ) - set the time until the next expiration and arm timer (POSIX) +nanosleep( ) - suspend the current task until the time interval elapses (POSIX) +*/ + +#define MS_PER_SEC 1000 +#define US_PER_SEC 1000000 +#define US_PER_MS 1000 +#define UCLOCKS_PER_SEC 1000000 + +typedef void (*event_callback_t)(timer_t, int); + +#ifndef TIMESPEC_TO_TIMEVAL +# define TIMESPEC_TO_TIMEVAL(tv, ts) { \ + (tv)->tv_sec = (ts)->tv_sec; \ + (tv)->tv_usec = (ts)->tv_nsec / 1000; \ +} +#endif + +#ifndef TIMEVAL_TO_TIMESPEC +# define TIMEVAL_TO_TIMESPEC(tv, ts) { \ + (ts)->tv_sec = (tv)->tv_sec; \ + (ts)->tv_nsec = (tv)->tv_usec * 1000; \ +} +#endif + +#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y)) + +#define timerroundup(t,g) \ + do { \ + if (!timerisset(t)) (t)->tv_usec=1; \ + if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \ + } while (0) + +typedef long uclock_t; + +#define TFLAG_NONE 0 +#define TFLAG_CANCELLED (1<<0) +#define TFLAG_DELETED (1<<1) + +struct event { + struct timeval it_interval; + struct timeval it_value; + event_callback_t func; + int arg; + unsigned short flags; + struct event *next; +#ifdef TIMER_PROFILE + uint expected_ms; + uclock_t start; +#endif +}; + +void timer_cancel(timer_t timerid); + +static void alarm_handler(int i); +static void check_event_queue(); +static void print_event_queue(); +static void check_timer(); +#if THIS_FINDS_USE +static int count_queue(struct event *); +#endif +static int timer_change_settime(timer_t timer_id, const struct itimerspec *timer_spec); +void block_timer(); +void unblock_timer(); + +static struct event *event_queue = NULL; +static struct event *event_freelist; +static uint g_granularity; +static int g_maxevents = 0; + +uclock_t uclock() +{ + struct timeval tv; + + gettimeofday(&tv, NULL); + return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec); +} + + +void init_event_queue(int n) +{ + int i; + struct itimerval tv; + + g_maxevents = n; + event_freelist = (struct event *) malloc(n * sizeof(struct event)); + memset(event_freelist, 0, n * sizeof(struct event)); + + for (i = 0; i < (n-1); i++) + event_freelist[i].next = &event_freelist[i+1]; + + event_freelist[i].next = NULL; + + tv.it_interval.tv_sec = 0; + tv.it_interval.tv_usec = 1; + tv.it_value.tv_sec = 0; + tv.it_value.tv_usec = 0; + setitimer (ITIMER_REAL, &tv, 0); + setitimer (ITIMER_REAL, 0, &tv); + g_granularity = tv.it_interval.tv_usec; + + signal(SIGALRM, alarm_handler); +} + + +int clock_gettime( + clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ + struct timespec * tp /* where to store current time */ +) +{ + struct timeval tv; + int n; + + + n = gettimeofday(&tv, NULL); + TIMEVAL_TO_TIMESPEC(&tv, tp); + + return n; +} + + +int timer_create( + clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ + struct sigevent * evp, /* user event handler */ + timer_t * pTimer /* ptr to return value */ +) +{ + struct event *event; + + if (clock_id != CLOCK_REALTIME) { + TIMERDBG("timer_create can only support clock id CLOCK_REALTIME"); + exit(1); + } + + if (evp != NULL) { + if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) { + TIMERDBG("timer_create can only support signalled alarms using SIGALRM"); + exit(1); + } + } + + event = event_freelist; + if (event == NULL) { + print_event_queue(); + } + assert(event != NULL); + + event->flags = TFLAG_NONE; + + event_freelist = event->next; + event->next = NULL; + + check_event_queue(); + + *pTimer = (timer_t) event; + + return 0; +} + +int timer_delete( + timer_t timerid /* timer ID */ +) +{ + struct event *event = (struct event *) timerid; + + if (event->flags & TFLAG_DELETED) { + TIMERDBG("Cannot delete a deleted event"); + return 1; + } + + timer_cancel(timerid); + + event->flags |= TFLAG_DELETED; + + event->next = event_freelist; + event_freelist = event; + + return 0; +} + +int timer_connect +( + timer_t timerid, /* timer ID */ + void (*routine)(timer_t, int), /* user routine */ + int arg /* user argument */ +) +{ + struct event *event = (struct event *) timerid; + + assert(routine != NULL); + event->func = routine; + event->arg = arg; + + return 0; +} + +/* + * Please Call this function only from the call back functions of the alarm_handler. + * This is just a hack +*/ +int timer_change_settime +( + timer_t timerid, /* timer ID */ + const struct itimerspec * value /* time to be set */ +) +{ + struct event *event = (struct event *) timerid; + + TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); + TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); + + return 1; +} + +int timer_settime +( + timer_t timerid, /* timer ID */ + int flags, /* absolute or relative */ + const struct itimerspec * value, /* time to be set */ + struct itimerspec * ovalue /* previous time set (NULL=no result) */ +) +{ + struct itimerval itimer; + struct event *event = (struct event *) timerid; + struct event **ppevent; + + TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); + TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); + + /* if .it_value is zero, the timer is disarmed */ + if (!timerisset(&event->it_value)) { + timer_cancel(timerid); + return 0; + } + + block_timer(); + +#ifdef TIMER_PROFILE + event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); + event->start = uclock(); +#endif + if (event->next) { + TIMERDBG("calling timer_settime with a timer that is already on the queue."); + } + + + /* We always want to make sure that the event at the head of the + queue has a timeout greater than the itimer granularity. + Otherwise we end up with the situation that the time remaining + on an itimer is greater than the time at the head of the queue + in the first place. */ + timerroundup(&event->it_value, g_granularity); + + timerclear(&itimer.it_value); + getitimer(ITIMER_REAL, &itimer); + if (timerisset(&itimer.it_value)) { + // reset the top timer to have an interval equal to the remaining interval + // when the timer was cancelled. + if (event_queue) { + if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { + // it is an error if the amount of time remaining is more than the amount of time + // requested by the top event. + // + TIMERDBG("timer_settime: TIMER ERROR!"); + + } else { + // some portion of the top event has already expired. + // Reset the interval of the top event to remaining + // time left in that interval. + // + event_queue->it_value = itimer.it_value; + + // if we were the earliest timer before now, we are still the earliest timer now. + // we do not need to reorder the list. + } + } + } + + // Now, march down the list, decrementing the new timer by the + // current it_value of each event on the queue. + ppevent = &event_queue; + while (*ppevent) { + if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { + // if the proposed event will trigger sooner than the next event + // in the queue, we will insert the new event just before the next one. + // + // we also need to adjust the delta value to the next event. + timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); + break; + } + // subtract the interval of the next event from the proposed interval. + timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); + + ppevent = &((*ppevent)->next); + } + + // we have found our proper place in the queue, + // link our new event into the pending event queue. + event->next = *ppevent; + *ppevent = event; + + check_event_queue(); + + // if our new event ended up at the front of the queue, reissue the timer. + if (event == event_queue) { + timerroundup(&event_queue->it_value, g_granularity); + timerclear(&itimer.it_interval); + itimer.it_value = event_queue->it_value; + + // we want to be sure to never turn off the timer completely, + // so if the next interval is zero, set it to some small value. + if (!timerisset(&(itimer.it_value))) + itimer.it_value = (struct timeval) { 0, 1 }; + + assert(!timerisset(&itimer.it_interval)); + assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); + assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); + setitimer(ITIMER_REAL, &itimer, NULL); + check_timer(); + } + + event->flags &= ~TFLAG_CANCELLED; + + unblock_timer(); + + return 0; +} + +static void check_timer() +{ + struct itimerval itimer; + + getitimer(ITIMER_REAL, &itimer); + if (timerisset(&itimer.it_interval)) { + TIMERDBG("ERROR timer interval is set."); + } + if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { + TIMERDBG("ERROR timer expires later than top event."); + } +} + + +static void check_event_queue() +{ + struct timeval sum; + struct event *event; + int i = 0; + +#ifdef notdef + int nfree = 0; + struct event *p; + for (p = event_freelist; p; p = p->next) + nfree++; + printf("%d free events\n", nfree); +#endif + + timerclear(&sum); + for (event = event_queue; event; event = event->next) { + if (i > g_maxevents) { + TIMERDBG("timer queue looks like it loops back on itself!"); + print_event_queue(); + exit(1); + } + i++; + } +} + +#if THIS_FINDS_USE +/* The original upnp version has this unused function, so I left it in + to maintain the resemblance. */ +static int count_queue(struct event *event_queue) +{ + struct event *event; + int i = 0; + for (event = event_queue; event; event = event->next) + i++; + return i; +} +#endif + +static void print_event_queue() +{ + struct event *event; + int i = 0; + + for (event = event_queue; event; event = event->next) { + printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n", + i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func); + if (i > g_maxevents) { + printf("...(giving up)\n"); + break; + } + } +} + +// The top element of the event queue must have expired. +// Remove that element, run its function, and reset the timer. +// if there is no interval, recycle the event structure. +static void alarm_handler(int i) +{ + struct event *event, **ppevent; + struct itimerval itimer; + struct timeval small_interval = { 0, g_granularity/2 }; +#ifdef TIMER_PROFILE + uint junk; + uclock_t end; + uint actual; +#endif + + block_timer(); + + // Loop through the event queue and remove the first event plus any + // subsequent events that will expire very soon thereafter (within 'small_interval'}. + // + do { + // remove the top event. + event = event_queue; + event_queue = event_queue->next; + event->next = NULL; + +#ifdef TIMER_PROFILE + end = uclock(); + actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)); + if (actual < 0) + junk = end; + TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000))); +#endif + + // call the event callback function + (*(event->func))((timer_t) event, (int)event->arg); + + /* If the event has been cancelled, do NOT put it back on the queue. */ + if ( !(event->flags & TFLAG_CANCELLED) ) { + + // if the event is a recurring event, reset the timer and + // find its correct place in the sorted list of events. + // + if (timerisset(&event->it_interval)) { + // event is recurring... + // + event->it_value = event->it_interval; +#ifdef TIMER_PROFILE + event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); + event->start = uclock(); +#endif + timerroundup(&event->it_value, g_granularity); + + // Now, march down the list, decrementing the new timer by the + // current delta of each event on the queue. + ppevent = &event_queue; + while (*ppevent) { + if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { + // if the proposed event will trigger sooner than the next event + // in the queue, we will insert the new event just before the next one. + // + // we also need to adjust the delta value to the next event. + timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); + break; + } + timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); + ppevent = &((*ppevent)->next); + } + + // we have found our proper place in the queue, + // link our new event into the pending event queue. + event->next = *ppevent; + *ppevent = event; + } else { + // there is no interval, so recycle the event structure. + //timer_delete((timer_t) event); + } + } + + check_event_queue(); + + } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <)); + + // re-issue the timer... + if (event_queue) { + timerroundup(&event_queue->it_value, g_granularity); + + timerclear(&itimer.it_interval); + itimer.it_value = event_queue->it_value; + // we want to be sure to never turn off the timer completely, + // so if the next interval is zero, set it to some small value. + if (!timerisset(&(itimer.it_value))) + itimer.it_value = (struct timeval) { 0, 1 }; + + setitimer(ITIMER_REAL, &itimer, NULL); + check_timer(); + } else { + TIMERDBG("There are no events in the queue - timer not reset."); + } + + unblock_timer(); +} + +static int block_count = 0; + +void block_timer() +{ + sigset_t set; + + if (block_count++ == 0) { + sigemptyset(&set); + sigaddset(&set, SIGALRM); + sigprocmask(SIG_BLOCK, &set, NULL); + } +} + +void unblock_timer() +{ + sigset_t set; + + if (--block_count == 0) { + sigemptyset(&set); + sigaddset(&set, SIGALRM); + sigprocmask(SIG_UNBLOCK, &set, NULL); + } +} + +void timer_cancel_all() +{ + struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; + struct event *event; + struct event **ppevent; + + setitimer(ITIMER_REAL, &timeroff, NULL); + + ppevent = &event_queue; + while (*ppevent) { + event = *ppevent; + *ppevent = event->next; + event->next = NULL; + } +} + + + +void timer_cancel(timer_t timerid) +{ + struct itimerval itimer; + struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; + struct event *event = (struct event *) timerid; + struct event **ppevent; + + if (event->flags & TFLAG_CANCELLED) { + TIMERDBG("Cannot cancel a cancelled event"); + return; + } + + block_timer(); + + ppevent = &event_queue; + while (*ppevent) { + if ( *ppevent == event ) { + + /* RACE CONDITION - if the alarm goes off while we are in + this loop, and if the timer we want to cancel is the + next to expire, the alarm will end up firing + after this routine is complete, causing it to go off early. */ + + /* If the cancelled timer is the next to expire, + we need to do something special to clean up correctly. */ + if (event == event_queue && event->next != NULL) { + timerclear(&itimer.it_value); + getitimer(ITIMER_REAL, &itimer); + + /* subtract the time that has already passed while waiting for this timer... */ + timersub(&(event->it_value), &(itimer.it_value), &(event->it_value)); + + /* and add any remainder to the next timer in the list */ + timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value)); + } + + *ppevent = event->next; + event->next = NULL; + + if (event_queue) { + timerroundup(&event_queue->it_value, g_granularity); + timerclear(&itimer.it_interval); + itimer.it_value = event_queue->it_value; + + /* We want to be sure to never turn off the timer + completely if there are more events on the queue, + so if the next interval is zero, set it to some + small value. */ + + if (!timerisset(&(itimer.it_value))) + itimer.it_value = (struct timeval) { 0, 1 }; + + assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); + assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); + setitimer(ITIMER_REAL, &itimer, NULL); + check_timer(); + } else { + setitimer(ITIMER_REAL, &timeroff, NULL); + } + break; + } + ppevent = &((*ppevent)->next); + } + + event->flags |= TFLAG_CANCELLED; + + unblock_timer(); +} + +/* +* timer related headers +*/ +#include "bcmtimer.h" + +/* +* locally used global variables and constants +*/ + +/* +* Initialize internal resources used in the timer module. It must be called +* before any other timer function calls. The param 'timer_entries' is used +* to pre-allocate fixed number of timer entries. +*/ +int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id) +{ + init_event_queue(timer_entries); + *module_id = (bcm_timer_module_id)event_freelist; + return 0; +} + +/* +* Cleanup internal resources used by this timer module. It deletes all +* pending timer entries from the backend timer system as well. +*/ +int bcm_timer_module_cleanup(bcm_timer_module_id module_id) +{ + module_id = 0; + return 0; +} + +/* Enable/Disable timer module */ +int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable) +{ + if (enable) + unblock_timer(); + else + block_timer(); + return 0; +} + +int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id) +{ + module_id = 0; + return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id); +} + +int bcm_timer_delete(bcm_timer_id timer_id) +{ + return timer_delete((timer_t)timer_id); +} + +int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec) +{ + return -1; +} + +int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) +{ + return timer_settime((timer_t)timer_id, 0, timer_spec, NULL); +} + +int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data) +{ + return timer_connect((timer_t)timer_id, (void *)func, data); +} + +int bcm_timer_cancel(bcm_timer_id timer_id) +{ + timer_cancel((timer_t)timer_id); + return 0; +} +int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) +{ + timer_change_settime((timer_t)timer_id, timer_spec); + return 1; +} diff --git a/openwrt/target/linux/package/nvram/src/main.c b/openwrt/target/linux/package/nvram/src/main.c new file mode 100644 index 000000000..a64430f7b --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/main.c @@ -0,0 +1,78 @@ +/* + * Frontend command-line utility for Linux NVRAM layer + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#include <typedefs.h> +#include <bcmnvram.h> + +static void +usage(void) +{ + fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n"); + exit(0); +} + +/* NVRAM utility */ +int +main(int argc, char **argv) +{ + char *name, *value, buf[NVRAM_SPACE]; + int size; + + /* Skip program name */ + --argc; + ++argv; + + if (!*argv) + usage(); + + /* Process the remaining arguments. */ + for (; *argv; argv++) { + if (!strncmp(*argv, "get", 3)) { + if (*++argv) { + if ((value = nvram_get(*argv))) + puts(value); + } + } + else if (!strncmp(*argv, "set", 3)) { + if (*++argv) { + strncpy(value = buf, *argv, sizeof(buf)); + name = strsep(&value, "="); + nvram_set(name, value); + } + } + else if (!strncmp(*argv, "unset", 5)) { + if (*++argv) + nvram_unset(*argv); + } + else if (!strncmp(*argv, "commit", 5)) { + nvram_commit(); + } + else if (!strncmp(*argv, "show", 4) || + !strncmp(*argv, "getall", 6)) { + nvram_getall(buf, sizeof(buf)); + for (name = buf; *name; name += strlen(name) + 1) + puts(name); + size = sizeof(struct nvram_header) + (int) name - (int) buf; + fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size); + } + if (!*argv) + break; + } + + return 0; +} diff --git a/openwrt/target/linux/package/nvram/src/nvram_convert.c b/openwrt/target/linux/package/nvram/src/nvram_convert.c new file mode 100644 index 000000000..485909026 --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/nvram_convert.c @@ -0,0 +1,77 @@ + +#define WL(a) "wl_"a +#define WL0(a) "wl0_"a +#define D11G(a) "d11g_"a + +#define PPP(a) "ppp_"a +#define PPPOE(a) "pppoe_"a + +struct nvram_convert { + char *name; // for WEB + char *wl0_name; // for driver + char *d11g_name; // for old nv name +}; + +struct nvram_convert nvram_converts[] = { + // Bellow change from 3.11.48.7 + { WL("ssid"), WL0("ssid"), ""}, + { WL("radio"), WL0("mode"), ""}, + { WL("mode"), WL0("mode"), ""}, + { WL("wds"), WL0("wds"), ""}, + { WL("auth"), WL0("auth"), ""}, + { WL("key"), WL0("key"), ""}, + { WL("key1"), WL0("key1"), ""}, + { WL("key2"), WL0("key2"), ""}, + { WL("key3"), WL0("key3"), ""}, + { WL("key4"), WL0("key4"), ""}, + { WL("maclist"), WL0("maclist"), ""}, + { WL("channel"), WL0("channel"), D11G("channel")}, + { WL("rateset"), WL0("rateset"), D11G("rateset")}, + { WL("rts"), WL0("rts"), D11G("rts")}, + { WL("bcn"), WL0("bcn"), D11G("bcn")}, + { WL("gmode"), WL0("gmode"), "d11g_mode"}, + { WL("unit"), WL0("unit"), ""}, + { WL("ifname"), WL0("ifname"), ""}, + { WL("phytype"), WL0("phytype"), ""}, + { WL("country"), WL0("country"), ""}, + { WL("closed"), WL0("closed"), ""}, + { WL("lazywds"), WL0("lazywds"), ""}, + { WL("wep"), WL0("wep"), ""}, + { WL("macmode"), WL0("macmode"), ""}, + { WL("rate"), WL0("rate"), D11G("rate")}, + { WL("frag"), WL0("frag"), D11G("frag")}, + { WL("dtim"), WL0("dtim"), D11G("dtim")}, + { WL("plcphdr"), WL0("plcphdr"), ""}, + { WL("gmode_protection"), WL0("gmode_protection"), ""}, + { WL("radio"), WL0("radio"), ""}, + // Bellow change from 3.21.9.0 + { WL("auth_mode"), WL0("auth_mode"), ""}, + { WL("radius_ipaddr"), WL0("radius_ipaddr"), ""}, + { WL("radius_port"), WL0("radius_port"), ""}, + { WL("radius_key"), WL0("radius_key"), ""}, + { WL("wpa_psk"), WL0("wpa_psk"), ""}, + { WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""}, + { WL("frameburst"), WL0("frameburst"), ""}, + { WL("crypto"), WL0("crypto"), ""}, + { WL("ap_isolate"), WL0("ap_isolate"), ""}, + { WL("afterburner"), WL0("afterburner"), ""}, + // for PPPoE + { PPP("username"), PPPOE("username"), ""}, + { PPP("passwd"), PPPOE("passwd"), ""}, + { PPP("idletime"), PPPOE("idletime"), ""}, + { PPP("keepalive"), PPPOE("keepalive"), ""}, + { PPP("demand"), PPPOE("demand"), ""}, + { PPP("service"), PPPOE("service"), ""}, + { PPP("ac"), PPPOE("ac"), ""}, + { PPP("static"), PPPOE("static"), ""}, + { PPP("static_ip"), PPPOE("static_ip"), ""}, + { PPP("username_1"), PPPOE("username_1"), ""}, + { PPP("passwd_1"), PPPOE("passwd_1"), ""}, + { PPP("idletime_1"), PPPOE("idletime_1"), ""}, + { PPP("keepalive_1"), PPPOE("keepalive_1"), ""}, + { PPP("demand_1"), PPPOE("demand_1"), ""}, + { PPP("service_1"), PPPOE("service_1"), ""}, + { PPP("ac_1"), PPPOE("ac_1"), ""}, + + { 0, 0, 0}, +}; diff --git a/openwrt/target/linux/package/nvram/src/nvram_convert.h b/openwrt/target/linux/package/nvram/src/nvram_convert.h new file mode 100644 index 000000000..70e12327d --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/nvram_convert.h @@ -0,0 +1,7 @@ + +struct nvram_convert { + char *name; + char *wl0_name; + char *d11g_name; +}; + diff --git a/openwrt/target/linux/package/nvram/src/nvram_linux.c b/openwrt/target/linux/package/nvram/src/nvram_linux.c new file mode 100644 index 000000000..c41e32118 --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/nvram_linux.c @@ -0,0 +1,320 @@ +/* + * NVRAM variable manipulation (Linux user mode half) + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <errno.h> +#include <error.h> +#include <string.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <sys/mman.h> + +#include <typedefs.h> +#include <bcmnvram.h> +#include <nvram_convert.h> +#include <shutils.h> +#include <utils.h> + +#define PATH_DEV_NVRAM "/dev/nvram" + +/* Globals */ +static int nvram_fd = -1; +static char *nvram_buf = NULL; +int check_action(void); +int file_to_buf(char *path, char *buf, int len); + +int +nvram_init(void *unused) +{ + if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0) + goto err; + + /* Map kernel string buffer into user space */ + if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) { + close(nvram_fd); + nvram_fd = -1; + goto err; + } + + return 0; + + err: + perror(PATH_DEV_NVRAM); + return errno; +} + +char * +nvram_get(const char *name) +{ + size_t count = strlen(name) + 1; + char tmp[100], *value; + unsigned long *off = (unsigned long *) tmp; + + if (nvram_fd < 0) + if (nvram_init(NULL)) + return NULL; + + if (count > sizeof(tmp)) { + if (!(off = malloc(count))) + return NULL; + } + + /* Get offset into mmap() space */ + strcpy((char *) off, name); + + count = read(nvram_fd, off, count); + + if (count == sizeof(unsigned long)) + value = &nvram_buf[*off]; + else + value = NULL; + + if (count < 0) + perror(PATH_DEV_NVRAM); + + if (off != (unsigned long *) tmp) + free(off); + + return value; +} + +int +nvram_getall(char *buf, int count) +{ + int ret; + + if (nvram_fd < 0) + if ((ret = nvram_init(NULL))) + return ret; + + if (count == 0) + return 0; + + /* Get all variables */ + *buf = '\0'; + + ret = read(nvram_fd, buf, count); + + if (ret < 0) + perror(PATH_DEV_NVRAM); + + return (ret == count) ? 0 : ret; +} + +static int +_nvram_set(const char *name, const char *value) +{ + size_t count = strlen(name) + 1; + char tmp[100], *buf = tmp; + int ret; + + if (nvram_fd < 0) + if ((ret = nvram_init(NULL))) + return ret; + + /* Unset if value is NULL */ + if (value) + count += strlen(value) + 1; + + if (count > sizeof(tmp)) { + if (!(buf = malloc(count))) + return -ENOMEM; + } + + if (value) + sprintf(buf, "%s=%s", name, value); + else + strcpy(buf, name); + + ret = write(nvram_fd, buf, count); + + if (ret < 0) + perror(PATH_DEV_NVRAM); + + if (buf != tmp) + free(buf); + + return (ret == count) ? 0 : ret; +} + +int +nvram_set(const char *name, const char *value) +{ + extern struct nvram_convert nvram_converts[]; + struct nvram_convert *v; + int ret; + + ret = _nvram_set(name, value); + + for(v = nvram_converts ; v->name ; v++) { + if(!strcmp(v->name, name)){ + if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value); + if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value); + } + } + + return ret; +} + +int +nvram_unset(const char *name) +{ + return _nvram_set(name, NULL); +} + +int +nvram_commit(void) +{ + int ret; + + cprintf("nvram_commit(): start\n"); + + if((check_action() == ACT_IDLE) || + (check_action() == ACT_SW_RESTORE) || + (check_action() == ACT_HW_RESTORE)){ + if (nvram_fd < 0) + if ((ret = nvram_init(NULL))) + return ret; + + ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL); + + if (ret < 0) + perror(PATH_DEV_NVRAM); + + cprintf("nvram_commit(): end\n"); + } + else + cprintf("nvram_commit(): nothing to do...\n"); + + return ret; +} + +int file2nvram(char *filename, char *varname) { + FILE *fp; + int c,count; + int i=0,j=0; + char mem[10000],buf[30000]; + + if ( !(fp=fopen(filename,"rb") )) + return 0; + + count=fread(mem,1,sizeof(mem),fp); + fclose(fp); + for (j=0;j<count;j++) { + if (i > sizeof(buf)-3 ) + break; + c=mem[j]; + if (c >= 32 && c <= 126 && c != '\\' && c != '~') { + buf[i++]=(unsigned char) c; + } else if (c==0) { + buf[i++]='~'; + } else { + buf[i++]='\\'; + sprintf(buf+i,"%02X",c); + i+=2; + } + } + if (i==0) return 0; + buf[i]=0; + //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf); + nvram_set(varname,buf); + //nvram_commit(); //Barry adds for test +} + +int nvram2file(char *varname, char *filename) { + FILE *fp; + int c,tmp; + int i=0,j=0; + char *buf; + char mem[10000]; + + if ( !(fp=fopen(filename,"wb") )) + return 0; + + buf=strdup(nvram_safe_get(varname)); + //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf); + while ( buf[i] && j < sizeof(mem)-3 ) { + if (buf[i] == '\\') { + i++; + tmp=buf[i+2]; + buf[i+2]=0; + sscanf(buf+i,"%02X",&c); + buf[i+2]=tmp; + i+=2; + mem[j]=c;j++; + } else if (buf[i] == '~') { + mem[j]=0;j++; + i++; + } else { + mem[j]=buf[i];j++; + i++; + } + } + if (j<=0) return j; + j=fwrite(mem,1,j,fp); + fclose(fp); + free(buf); + return j; +} + +int +check_action(void) +{ + char buf[80] = ""; + + if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){ + if(!strcmp(buf, "ACT_TFTP_UPGRADE")){ + cprintf("Upgrading from tftp now, quiet exit....\n"); + return ACT_TFTP_UPGRADE; + } + else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){ + cprintf("Upgrading from web (https) now, quiet exit....\n"); + return ACT_WEBS_UPGRADE; + } + else if(!strcmp(buf, "ACT_WEB_UPGRADE")){ + cprintf("Upgrading from web (http) now, quiet exit....\n"); + return ACT_WEB_UPGRADE; + } + else if(!strcmp(buf, "ACT_SW_RESTORE")){ + cprintf("Receive restore command from web, quiet exit....\n"); + return ACT_SW_RESTORE; + } + else if(!strcmp(buf, "ACT_HW_RESTORE")){ + cprintf("Receive restore commond from resetbutton, quiet exit....\n"); + return ACT_HW_RESTORE; + } + } + //fprintf(stderr, "Waiting for upgrading....\n"); + return ACT_IDLE; +} + +int +file_to_buf(char *path, char *buf, int len) +{ + FILE *fp; + + memset(buf, 0 , len); + + if ((fp = fopen(path, "r"))) { + fgets(buf, len, fp); + fclose(fp); + return 1; + } + + return 0; +} diff --git a/openwrt/target/linux/package/nvram/src/shutils.c b/openwrt/target/linux/package/nvram/src/shutils.c new file mode 100644 index 000000000..49ad41af8 --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/shutils.c @@ -0,0 +1,329 @@ +/* + * Shell-like utility functions + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <errno.h> +#include <error.h> +#include <fcntl.h> +#include <limits.h> +#include <unistd.h> +#include <signal.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/wait.h> +#include <termios.h> +#include <sys/ioctl.h> +#include <sys/time.h> +#include <net/ethernet.h> + +#include <shutils.h> + +/* + * Reads file and returns contents + * @param fd file descriptor + * @return contents of file or NULL if an error occurred + */ +char * +fd2str(int fd) +{ + char *buf = NULL; + size_t count = 0, n; + + do { + buf = realloc(buf, count + 512); + n = read(fd, buf + count, 512); + if (n < 0) { + free(buf); + buf = NULL; + } + count += n; + } while (n == 512); + + close(fd); + if (buf) + buf[count] = '\0'; + return buf; +} + +/* + * Reads file and returns contents + * @param path path to file + * @return contents of file or NULL if an error occurred + */ +char * +file2str(const char *path) +{ + int fd; + + if ((fd = open(path, O_RDONLY)) == -1) { + perror(path); + return NULL; + } + + return fd2str(fd); +} + +/* + * Waits for a file descriptor to change status or unblocked signal + * @param fd file descriptor + * @param timeout seconds to wait before timing out or 0 for no timeout + * @return 1 if descriptor changed status or 0 if timed out or -1 on error + */ +int +waitfor(int fd, int timeout) +{ + fd_set rfds; + struct timeval tv = { timeout, 0 }; + + FD_ZERO(&rfds); + FD_SET(fd, &rfds); + return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL); +} + +/* + * Concatenates NULL-terminated list of arguments into a single + * commmand and executes it + * @param argv argument list + * @param path NULL, ">output", or ">>output" + * @param timeout seconds to wait before timing out or 0 for no timeout + * @param ppid NULL to wait for child termination or pointer to pid + * @return return value of executed command or errno + */ +int +_eval(char *const argv[], char *path, int timeout, int *ppid) +{ + pid_t pid; + int status; + int fd; + int flags; + int sig; + char buf[254]=""; + int i; + + switch (pid = fork()) { + case -1: /* error */ + perror("fork"); + return errno; + case 0: /* child */ + /* Reset signal handlers set for parent process */ + for (sig = 0; sig < (_NSIG-1); sig++) + signal(sig, SIG_DFL); + + /* Clean up */ + ioctl(0, TIOCNOTTY, 0); + close(STDIN_FILENO); + close(STDOUT_FILENO); + close(STDERR_FILENO); + setsid(); + + /* We want to check the board if exist UART? , add by honor 2003-12-04 */ + if ((fd = open("/dev/console", O_RDWR)) < 0) { + (void) open("/dev/null", O_RDONLY); + (void) open("/dev/null", O_WRONLY); + (void) open("/dev/null", O_WRONLY); + } + else{ + close(fd); + (void) open("/dev/console", O_RDONLY); + (void) open("/dev/console", O_WRONLY); + (void) open("/dev/console", O_WRONLY); + } + + /* Redirect stdout to <path> */ + if (path) { + flags = O_WRONLY | O_CREAT; + if (!strncmp(path, ">>", 2)) { + /* append to <path> */ + flags |= O_APPEND; + path += 2; + } else if (!strncmp(path, ">", 1)) { + /* overwrite <path> */ + flags |= O_TRUNC; + path += 1; + } + if ((fd = open(path, flags, 0644)) < 0) + perror(path); + else { + dup2(fd, STDOUT_FILENO); + close(fd); + } + } + + /* execute command */ + for(i=0 ; argv[i] ; i++) + snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]); + dprintf("cmd=[%s]\n", buf); + setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1); + alarm(timeout); + execvp(argv[0], argv); + perror(argv[0]); + exit(errno); + default: /* parent */ + if (ppid) { + *ppid = pid; + return 0; + } else { + waitpid(pid, &status, 0); + if (WIFEXITED(status)) + return WEXITSTATUS(status); + else + return status; + } + } +} + +/* + * Concatenates NULL-terminated list of arguments into a single + * commmand and executes it + * @param argv argument list + * @return stdout of executed command or NULL if an error occurred + */ +char * +_backtick(char *const argv[]) +{ + int filedes[2]; + pid_t pid; + int status; + char *buf = NULL; + + /* create pipe */ + if (pipe(filedes) == -1) { + perror(argv[0]); + return NULL; + } + + switch (pid = fork()) { + case -1: /* error */ + return NULL; + case 0: /* child */ + close(filedes[0]); /* close read end of pipe */ + dup2(filedes[1], 1); /* redirect stdout to write end of pipe */ + close(filedes[1]); /* close write end of pipe */ + execvp(argv[0], argv); + exit(errno); + break; + default: /* parent */ + close(filedes[1]); /* close write end of pipe */ + buf = fd2str(filedes[0]); + waitpid(pid, &status, 0); + break; + } + + return buf; +} + +/* + * Kills process whose PID is stored in plaintext in pidfile + * @param pidfile PID file + * @return 0 on success and errno on failure + */ +int +kill_pidfile(char *pidfile) +{ + FILE *fp = fopen(pidfile, "r"); + char buf[256]; + + if (fp && fgets(buf, sizeof(buf), fp)) { + pid_t pid = strtoul(buf, NULL, 0); + fclose(fp); + return kill(pid, SIGTERM); + } else + return errno; +} + +/* + * fread() with automatic retry on syscall interrupt + * @param ptr location to store to + * @param size size of each element of data + * @param nmemb number of elements + * @param stream file stream + * @return number of items successfully read + */ +int +safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream) +{ + size_t ret = 0; + + do { + clearerr(stream); + ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream); + } while (ret < nmemb && ferror(stream) && errno == EINTR); + + return ret; +} + +/* + * fwrite() with automatic retry on syscall interrupt + * @param ptr location to read from + * @param size size of each element of data + * @param nmemb number of elements + * @param stream file stream + * @return number of items successfully written + */ +int +safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream) +{ + size_t ret = 0; + + do { + clearerr(stream); + ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream); + } while (ret < nmemb && ferror(stream) && errno == EINTR); + + return ret; +} + +/* + * Convert Ethernet address string representation to binary data + * @param a string in xx:xx:xx:xx:xx:xx notation + * @param e binary data + * @return TRUE if conversion was successful and FALSE otherwise + */ +int +ether_atoe(const char *a, unsigned char *e) +{ + char *c = (char *) a; + int i = 0; + + memset(e, 0, ETHER_ADDR_LEN); + for (;;) { + e[i++] = (unsigned char) strtoul(c, &c, 16); + if (!*c++ || i == ETHER_ADDR_LEN) + break; + } + return (i == ETHER_ADDR_LEN); +} + +/* + * Convert Ethernet address binary data to string representation + * @param e binary data + * @param a string in xx:xx:xx:xx:xx:xx notation + * @return a + */ +char * +ether_etoa(const unsigned char *e, char *a) +{ + char *c = a; + int i; + + for (i = 0; i < ETHER_ADDR_LEN; i++) { + if (i) + *c++ = ':'; + c += sprintf(c, "%02X", e[i] & 0xff); + } + return a; +} diff --git a/openwrt/target/linux/package/nvram/src/wl.c b/openwrt/target/linux/package/nvram/src/wl.c new file mode 100644 index 000000000..f09317ad0 --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/wl.c @@ -0,0 +1,86 @@ +/* + * Wireless network adapter utilities + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ +#include <string.h> + +#include <typedefs.h> +#include <wlutils.h> + +int +wl_probe(char *name) +{ + int ret, val; + + /* Check interface */ + if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val)))) + return ret; + if (val != WLC_IOCTL_MAGIC) + return -1; + if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val)))) + return ret; + if (val > WLC_IOCTL_VERSION) + return -1; + + return ret; +} + +int +wl_set_val(char *name, char *var, void *val, int len) +{ + char buf[128]; + int buf_len; + + /* check for overflow */ + if ((buf_len = strlen(var)) + 1 + len > sizeof(buf)) + return -1; + + strcpy(buf, var); + buf_len += 1; + + /* append int value onto the end of the name string */ + memcpy(&buf[buf_len], val, len); + buf_len += len; + + return wl_ioctl(name, WLC_SET_VAR, buf, buf_len); +} + +int +wl_get_val(char *name, char *var, void *val, int len) +{ + char buf[128]; + int ret; + + /* check for overflow */ + if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf)) + return -1; + + strcpy(buf, var); + if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf)))) + return ret; + + memcpy(val, buf, len); + return 0; +} + +int +wl_set_int(char *name, char *var, int val) +{ + return wl_set_val(name, var, &val, sizeof(val)); +} + +int +wl_get_int(char *name, char *var, int *val) +{ + return wl_get_val(name, var, val, sizeof(*val)); +} + diff --git a/openwrt/target/linux/package/nvram/src/wl_linux.c b/openwrt/target/linux/package/nvram/src/wl_linux.c new file mode 100644 index 000000000..126a40b4b --- /dev/null +++ b/openwrt/target/linux/package/nvram/src/wl_linux.c @@ -0,0 +1,77 @@ +/* + * Wireless network adapter utilities (linux-specific) + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <stdio.h> +#include <unistd.h> +#include <string.h> +#include <errno.h> +#include <sys/ioctl.h> +#include <net/if.h> + +#include <typedefs.h> +#include <wlioctl.h> +#include <wlutils.h> + +int +wl_ioctl(char *name, int cmd, void *buf, int len) +{ + struct ifreq ifr; + wl_ioctl_t ioc; + int ret = 0; + int s; + + /* open socket to kernel */ + if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + perror("socket"); + return errno; + } + + /* do it */ + ioc.cmd = cmd; + ioc.buf = buf; + ioc.len = len; + strncpy(ifr.ifr_name, name, IFNAMSIZ); + ifr.ifr_data = (caddr_t) &ioc; + if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0) + if (cmd != WLC_GET_MAGIC) + perror(ifr.ifr_name); + + /* cleanup */ + close(s); + return ret; +} + +int +wl_hwaddr(char *name, unsigned char *hwaddr) +{ + struct ifreq ifr; + int ret = 0; + int s; + + /* open socket to kernel */ + if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + perror("socket"); + return errno; + } + + /* do it */ + strncpy(ifr.ifr_name, name, IFNAMSIZ); + if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0) + memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN); + + /* cleanup */ + close(s); + return ret; +} + diff --git a/openwrt/target/linux/package/openwrt/Makefile b/openwrt/target/linux/package/openwrt/Makefile new file mode 100644 index 000000000..ee38f75a1 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/Makefile @@ -0,0 +1,34 @@ +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME := openwrt-utils +PKG_RELEASE := 2 +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) + +include $(TOPDIR)/package/rules.mk + +BR2_PACKAGE_OPENWRT:=y # ignore menuconfig +$(eval $(call PKG_template,OPENWRT,openwrt-utils,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH))) + + +$(PKG_BUILD_DIR)/.prepared: + mkdir -p $(PKG_BUILD_DIR) + touch $@ + +$(PKG_BUILD_DIR)/jffs2root: jffs2root.c + $(TARGET_CC) -o $@ $< + +$(PKG_BUILD_DIR)/.built: $(PKG_BUILD_DIR)/jffs2root + touch $@ + +$(IPKG_OPENWRT): + mkdir -p $(IDIR_OPENWRT)/sbin + cp $(PKG_BUILD_DIR)/jffs2root $(IDIR_OPENWRT)/sbin + $(RSTRIP) $(IDIR_OPENWRT) + $(IPKG_BUILD) $(IDIR_OPENWRT) $(PACKAGE_DIR) + +compile: install-dev +install-dev: + mkdir -p $(STAGING_DIR)/usr/include + cp -a ./include/* $(STAGING_DIR)/usr/include/ diff --git a/openwrt/target/linux/package/openwrt/include/bcmnvram.h b/openwrt/target/linux/package/openwrt/include/bcmnvram.h new file mode 100644 index 000000000..3c452634e --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/bcmnvram.h @@ -0,0 +1,148 @@ +/* + * NVRAM variable manipulation + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _bcmnvram_h_ +#define _bcmnvram_h_ + +#ifndef _LANGUAGE_ASSEMBLY + +#include <typedefs.h> + +struct nvram_header { + uint32 magic; + uint32 len; + uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */ + uint32 config_refresh; /* 0:15 config, 16:31 refresh */ + uint32 config_ncdl; /* ncdl values for memc */ +}; + +struct nvram_tuple { + char *name; + char *value; + struct nvram_tuple *next; +}; + +/* + * Initialize NVRAM access. May be unnecessary or undefined on certain + * platforms. + */ +extern int nvram_init(void *sbh); + +/* + * Disable NVRAM access. May be unnecessary or undefined on certain + * platforms. + */ +extern void nvram_exit(void); + +/* + * Get the value of an NVRAM variable. The pointer returned may be + * invalid after a set. + * @param name name of variable to get + * @return value of variable or NULL if undefined + */ +extern char * nvram_get(const char *name); + +/* + * Get the value of an NVRAM variable. + * @param name name of variable to get + * @return value of variable or NUL if undefined + */ +#define nvram_safe_get(name) (nvram_get(name) ? : "") + +#define nvram_safe_unset(name) ({ \ + if(nvram_get(name)) \ + nvram_unset(name); \ +}) + +#define nvram_safe_set(name, value) ({ \ + if(!nvram_get(name) || strcmp(nvram_get(name), value)) \ + nvram_set(name, value); \ +}) + +/* + * Match an NVRAM variable. + * @param name name of variable to match + * @param match value to compare against value of variable + * @return TRUE if variable is defined and its value is string equal + * to match or FALSE otherwise + */ +static INLINE int +nvram_match(char *name, char *match) { + const char *value = nvram_get(name); + return (value && !strcmp(value, match)); +} + +/* + * Inversely match an NVRAM variable. + * @param name name of variable to match + * @param match value to compare against value of variable + * @return TRUE if variable is defined and its value is not string + * equal to invmatch or FALSE otherwise + */ +static INLINE int +nvram_invmatch(char *name, char *invmatch) { + const char *value = nvram_get(name); + return (value && strcmp(value, invmatch)); +} + +/* + * Set the value of an NVRAM variable. The name and value strings are + * copied into private storage. Pointers to previously set values + * may become invalid. The new value may be immediately + * retrieved but will not be permanently stored until a commit. + * @param name name of variable to set + * @param value value of variable + * @return 0 on success and errno on failure + */ +extern int nvram_set(const char *name, const char *value); + +/* + * Unset an NVRAM variable. Pointers to previously set values + * remain valid until a set. + * @param name name of variable to unset + * @return 0 on success and errno on failure + * NOTE: use nvram_commit to commit this change to flash. + */ +extern int nvram_unset(const char *name); + +/* + * Commit NVRAM variables to permanent storage. All pointers to values + * may be invalid after a commit. + * NVRAM values are undefined after a commit. + * @return 0 on success and errno on failure + */ +extern int nvram_commit(void); + +/* + * Get all NVRAM variables (format name=value\0 ... \0\0). + * @param buf buffer to store variables + * @param count size of buffer in bytes + * @return 0 on success and errno on failure + */ +extern int nvram_getall(char *buf, int count); + +extern int file2nvram(char *filename, char *varname); +extern int nvram2file(char *varname, char *filename); + +#endif /* _LANGUAGE_ASSEMBLY */ + +#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ +#define NVRAM_VERSION 1 +#define NVRAM_HEADER_SIZE 20 +#define NVRAM_SPACE 0x8000 +#define FLASH_BASE 0xbfc00000 /* Extif core */ +#define FLASH_MIN 0x00100000 /* Minimum flash size */ +#define FLASH_MAX 0x00400000 /* Maximum flash size with extif */ + +#endif /* _bcmnvram_h_ */ diff --git a/openwrt/target/linux/package/openwrt/include/bcmutils.h b/openwrt/target/linux/package/openwrt/include/bcmutils.h new file mode 100644 index 000000000..05ad41d9d --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/bcmutils.h @@ -0,0 +1,157 @@ +/* + * Misc useful os-independent macros and functions. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _bcmutils_h_ +#define _bcmutils_h_ + +#ifndef MIN +#define MIN(a, b) (((a)<(b))?(a):(b)) +#endif + +#ifndef MAX +#define MAX(a, b) (((a)>(b))?(a):(b)) +#endif + +#define CEIL(x, y) (((x) + ((y)-1)) / (y)) +#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y)) +#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0) +#define ISPOWEROF2(x) ((((x)-1)&(x))==0) +#define OFFSETOF(type, member) ((uint) &((type *)0)->member) +#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) + +/* bit map related macros */ +#ifndef setbit +#define NBBY 8 /* 8 bits per byte */ +#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) +#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) +#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) +#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) +#endif + +#define NBITS(type) (sizeof (type) * 8) + +#define _BCM_U 0x01 /* upper */ +#define _BCM_L 0x02 /* lower */ +#define _BCM_D 0x04 /* digit */ +#define _BCM_C 0x08 /* cntrl */ +#define _BCM_P 0x10 /* punct */ +#define _BCM_S 0x20 /* white space (space/lf/tab) */ +#define _BCM_X 0x40 /* hex digit */ +#define _BCM_SP 0x80 /* hard space (0x20) */ + +extern unsigned char bcm_ctype[]; +#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) + +#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) +#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) +#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) +#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) +#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) +#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) +#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) +#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) +#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) +#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) +#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) + +/* + * Spin at most 'us' microseconds while 'exp' is true. + * Caller should explicitly test 'exp' when this completes + * and take appropriate error action if 'exp' is still true. + */ +#define SPINWAIT(exp, us) { \ + uint countdown = (us) + 9; \ + while ((exp) && (countdown >= 10)) {\ + OSL_DELAY(10); \ + countdown -= 10; \ + } \ +} + +/* generic osl packet queue */ +struct pktq { + void *head; /* first packet to dequeue */ + void *tail; /* last packet to dequeue */ + uint len; /* number of queued packets */ + uint maxlen; /* maximum number of queued packets */ + bool priority; /* enqueue by packet priority */ +}; +#define DEFAULT_QLEN 128 + +#define pktq_len(q) ((q)->len) +#define pktq_avail(q) ((q)->maxlen - (q)->len) +#define pktq_head(q) ((q)->head) +#define pktq_full(q) ((q)->len >= (q)->maxlen) + +/* crc defines */ +#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ +#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ +#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ +#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ +#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ + +/* tag_ID/length/value_buffer tuple */ +typedef struct bcm_tlv { + uint8 id; + uint8 len; + uint8 data[1]; +} bcm_tlv_t; + +/* Check that bcm_tlv_t fits into the given buflen */ +#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (buflen) >= 2 + (elt)->len) + +/* buffer length for ethernet address from bcm_ether_ntoa() */ +#define ETHER_ADDR_STR_LEN 18 + +/* +* load 32-bit value from unaligned byte array +*/ +#ifdef IL_BIGENDIAN +#define load32_ua(a) ((((uint8 *)(a))[0] << 24) + (((uint8 *)(a))[1] << 16) + \ + (((uint8 *)(a))[2] << 8) + ((uint8 *)(a))[3]) +#else +#define load32_ua(a) ((((uint8 *)(a))[3] << 24) + (((uint8 *)(a))[2] << 16) + \ + (((uint8 *)(a))[1] << 8) + ((uint8 *)(a))[0]) +#endif + +/* externs */ +extern uint bcm_atoi(char *s); +extern uchar bcm_toupper(uchar c); +extern ulong bcm_strtoul(char *cp, char **endp, uint base); +extern void deadbeef(char *p, uint len); +extern void prhex(char *msg, uchar *buf, uint len); +extern void prpkt(char *msg, void *drv, void *p0); +extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf); +extern uint pkttotlen(void *drv, void *); +extern uchar *bcm_ether_ntoa(char *ea, char *buf); +extern int bcm_ether_atoe(char *p, char *ea); +extern void bcm_mdelay(uint ms); +extern char *getvar(char *vars, char *name); +extern int getintvar(char *vars, char *name); +extern char *bcmstrstr(char *haystack, char *needle); + +extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc); +extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc); +extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc); +extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); +extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); +extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); +extern void pktq_init(struct pktq *q, uint maxlen, bool priority); +extern bool pktenq(struct pktq *q, void *p, bool lifo); +extern void *pktdeq(struct pktq *q); + +#define bcmlog(fmt, a1, a2) +#define bcmdumplog(buf, size) *buf = '\0' +#define bcmdumplogent(buf, idx) -1 + +#endif /* _bcmutils_h_ */ diff --git a/openwrt/target/linux/package/openwrt/include/cy_conf.h b/openwrt/target/linux/package/openwrt/include/cy_conf.h new file mode 100644 index 000000000..dbe387b83 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/cy_conf.h @@ -0,0 +1,69 @@ + +#define DNSMASQ_SUPPORT 1 +#define CONFIG_DNSMASQ y +#define UDHCPD_SUPPORT 1 +#define CONFIG_UDHCPD y +#define UDHCPC_SUPPORT 1 +#define CONFIG_UDHCPC y +#define PPPOE_SUPPORT 1 +#define CONFIG_PPPOE y +#define PPTP_SUPPORT 1 +#define CONFIG_PPTP y +#define L2TP_SUPPORT 1 +#define CONFIG_L2TP y +#define PPPD_SUPPORT 1 +#define CONFIG_PPPD y +#define ZEBRA_SUPPORT 1 +#define CONFIG_ZEBRA y +#define TFTPD_SUPPORT 1 +#define CONFIG_TFTPD y +#define DDNS_SUPPORT 1 +#define CONFIG_DDNS y +#define CRON_SUPPORT 1 +#define CONFIG_CRON y +#define HTTPD_SUPPORT 1 +#define CONFIG_HTTPD y +#define GET_POST_SUPPORT 1 +#define CONFIG_GET_POST y + +#if 1 +#define HEARTBEAT_SUPPORT 1 +#define CONFIG_HEARTBEAT y +#define MULTICAST_SUPPORT 1 +#define CONFIG_MULTICAST y +#define SETUP_WIZARD_SUPPORT 1 +#define CONFIG_SETUP_WIZARD y +#define PARENTAL_CONTROL_SUPPORT 1 +#define CONFIG_PARENTAL_CONTROL y +#define HTTPS_SUPPORT 1 +#define CONFIG_HTTPS y +#define EOU_SUPPORT 1 +#define CONFIG_EOU y +#define EZC_SUPPORT 1 +#define CONFIG_EZC y +#define WRITE_MAC_SUPPORT 1 +#define CONFIG_WRITE_MAC y +#define DIAG_SUPPORT 1 +#define CONFIG_DIAG y +#endif + +#define SPEED_BOOSTER_SUPPORT 1 +#define CONFIG_SPEED_BOOSTER y +#define XBOX_SUPPORT 1 +#define CONFIG_XBOX y + +#if 0 +#define MPPPOE_SUPPORT 1 +#define CONFIG_MPPPOE y +#define UNNUMBERIP_SUPPORT 1 +#define CONFIG_UNNUMBERIP y +#endif + +#define WL_STA_SUPPORT 1 +#define CONFIG_WL_STA y +#define BACKUP_RESTORE_SUPPORT 1 +#define CONFIG_BACKUP_RESTORE y +#define PORT_TRIGGER_SUPPORT 1 +#define CONFIG_PORT_TRIGGER y +#define HW_QOS_SUPPORT 1 +#define CONFIG_HW_QOS y diff --git a/openwrt/target/linux/package/openwrt/include/epivers.h b/openwrt/target/linux/package/openwrt/include/epivers.h new file mode 100644 index 000000000..e174fb50d --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/epivers.h @@ -0,0 +1,69 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + * +*/ + +#ifndef _epivers_h_ +#define _epivers_h_ + +#ifdef linux +#include <linux/config.h> +#endif + +/* Vendor Name, ASCII, 32 chars max */ +#ifdef COMPANYNAME +#define HPNA_VENDOR COMPANYNAME +#else +#define HPNA_VENDOR "Broadcom Corporation" +#endif + +/* Driver Date, ASCII, 32 chars max */ +#define HPNA_DRV_BUILD_DATE __DATE__ + +/* Hardware Manufacture Date, ASCII, 32 chars max */ +#define HPNA_HW_MFG_DATE "Not Specified" + +/* See documentation for Device Type values, 32 values max */ +#ifndef HPNA_DEV_TYPE + +#if defined(CONFIG_BRCM_VJ) +#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } + +#elif defined(CONFIG_BCRM_93725) +#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } + +#else +#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } + +#endif + +#endif /* !HPNA_DEV_TYPE */ + + +#define EPI_MAJOR_VERSION 3 + +#define EPI_MINOR_VERSION 60 + +#define EPI_RC_NUMBER 13 + +#define EPI_INCREMENTAL_NUMBER 0 + +#define EPI_BUILD_NUMBER 0 + +#define EPI_VERSION 3,60,13,0 + +#define EPI_VERSION_NUM 0x033c0d00 + +/* Driver Version String, ASCII, 32 chars max */ +#define EPI_VERSION_STR "3.60.13.0" +#define EPI_ROUTER_VERSION_STR "3.61.13.0" + +#endif /* _epivers_h_ */ diff --git a/openwrt/target/linux/package/openwrt/include/proto/802.11.h b/openwrt/target/linux/package/openwrt/include/proto/802.11.h new file mode 100644 index 000000000..ea57850ce --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/proto/802.11.h @@ -0,0 +1,852 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Fundamental types and constants relating to 802.11 + * + * $Id$ + */ + +#ifndef _802_11_H_ +#define _802_11_H_ + +#ifndef _TYPEDEFS_H_ +#include <typedefs.h> +#endif + +#ifndef _NET_ETHERNET_H_ +#include <proto/ethernet.h> +#endif + +/* enable structure packing */ +#if !defined(__GNUC__) +#pragma pack(1) +#endif + +/* some platforms require stronger medicine */ +#if defined(__GNUC__) +#define PACKED __attribute__((packed)) +#else +#define PACKED +#endif + + +#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ + +/* Generic 802.11 frame constants */ +#define DOT11_A3_HDR_LEN 24 +#define DOT11_A4_HDR_LEN 30 +#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN +#define DOT11_FCS_LEN 4 +#define DOT11_ICV_LEN 4 +#define DOT11_ICV_AES_LEN 8 +#define DOT11_QOS_LEN 2 + +#define DOT11_KEY_INDEX_SHIFT 6 +#define DOT11_IV_LEN 4 +#define DOT11_IV_TKIP_LEN 8 +#define DOT11_IV_AES_OCB_LEN 4 +#define DOT11_IV_AES_CCM_LEN 8 + +/* Includes MIC */ +#define DOT11_MAX_MPDU_BODY_LEN 2304 +/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */ +#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \ + DOT11_QOS_LEN + \ + DOT11_IV_AES_CCM_LEN + \ + DOT11_MAX_MPDU_BODY_LEN + \ + DOT11_ICV_LEN + \ + DOT11_FCS_LEN) + +#define DOT11_MAX_SSID_LEN 32 + +/* dot11RTSThreshold */ +#define DOT11_DEFAULT_RTS_LEN 2347 +#define DOT11_MAX_RTS_LEN 2347 + +/* dot11FragmentationThreshold */ +#define DOT11_MIN_FRAG_LEN 256 +#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ +#define DOT11_DEFAULT_FRAG_LEN 2346 + +/* dot11BeaconPeriod */ +#define DOT11_MIN_BEACON_PERIOD 1 +#define DOT11_MAX_BEACON_PERIOD 0xFFFF + +/* dot11DTIMPeriod */ +#define DOT11_MIN_DTIM_PERIOD 1 +#define DOT11_MAX_DTIM_PERIOD 0xFF + +/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ +#define DOT11_LLC_SNAP_HDR_LEN 8 +#define DOT11_OUI_LEN 3 +struct dot11_llc_snap_header { + uint8 dsap; /* always 0xAA */ + uint8 ssap; /* always 0xAA */ + uint8 ctl; /* always 0x03 */ + uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 + Bridge-Tunnel: 0x00 0x00 0xF8 */ + uint16 type; /* ethertype */ +} PACKED; + +/* RFC1042 header used by 802.11 per 802.1H */ +#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) + +/* Generic 802.11 MAC header */ +/* + * N.B.: This struct reflects the full 4 address 802.11 MAC header. + * The fields are defined such that the shorter 1, 2, and 3 + * address headers just use the first k fields. + */ +struct dot11_header { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr a1; /* address 1 */ + struct ether_addr a2; /* address 2 */ + struct ether_addr a3; /* address 3 */ + uint16 seq; /* sequence control */ + struct ether_addr a4; /* address 4 */ +} PACKED; + +/* Control frames */ + +struct dot11_rts_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ + struct ether_addr ta; /* transmitter address */ +} PACKED; +#define DOT11_RTS_LEN 16 + +struct dot11_cts_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ +} PACKED; +#define DOT11_CTS_LEN 10 + +struct dot11_ack_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ +} PACKED; +#define DOT11_ACK_LEN 10 + +struct dot11_ps_poll_frame { + uint16 fc; /* frame control */ + uint16 durid; /* AID */ + struct ether_addr bssid; /* receiver address, STA in AP */ + struct ether_addr ta; /* transmitter address */ +} PACKED; +#define DOT11_PS_POLL_LEN 16 + +struct dot11_cf_end_frame { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr ra; /* receiver address */ + struct ether_addr bssid; /* transmitter address, STA in AP */ +} PACKED; +#define DOT11_CS_END_LEN 16 + +/* Management frame header */ +struct dot11_management_header { + uint16 fc; /* frame control */ + uint16 durid; /* duration/ID */ + struct ether_addr da; /* receiver address */ + struct ether_addr sa; /* transmitter address */ + struct ether_addr bssid; /* BSS ID */ + uint16 seq; /* sequence control */ +} PACKED; +#define DOT11_MGMT_HDR_LEN 24 + +/* Management frame payloads */ + +struct dot11_bcn_prb { + uint32 timestamp[2]; + uint16 beacon_interval; + uint16 capability; +} PACKED; +#define DOT11_BCN_PRB_LEN 12 + +struct dot11_auth { + uint16 alg; /* algorithm */ + uint16 seq; /* sequence control */ + uint16 status; /* status code */ +} PACKED; +#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ + +struct dot11_assoc_req { + uint16 capability; /* capability information */ + uint16 listen; /* listen interval */ +} PACKED; + +struct dot11_assoc_resp { + uint16 capability; /* capability information */ + uint16 status; /* status code */ + uint16 aid; /* association ID */ +} PACKED; + +struct dot11_action_measure { + uint8 category; + uint8 action; + uint8 token; + uint8 data[1]; +} PACKED; +#define DOT11_ACTION_MEASURE_LEN 3 + +/************** + 802.11h related definitions. +**************/ +typedef struct { + uint8 id; + uint8 len; + uint8 power; +} dot11_power_cnst_t; + +typedef struct { + uint8 min; + uint8 max; +} dot11_power_cap_t; + +typedef struct { + uint8 id; + uint8 len; + uint8 tx_pwr; + uint8 margin; +} dot11_tpc_rep_t; +#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ + +typedef struct { + uint8 id; + uint8 len; + uint8 first_channel; + uint8 num_channels; +} dot11_supp_channels_t; + +struct dot11_channel_switch { + uint8 id; + uint8 len; + uint8 mode; + uint8 channel; + uint8 count; +} PACKED; +typedef struct dot11_channel_switch dot11_channel_switch_t; + +/* 802.11h Measurement Request/Report IEs */ +/* Measurement Type field */ +#define DOT11_MEASURE_TYPE_BASIC 0 +#define DOT11_MEASURE_TYPE_CCA 1 +#define DOT11_MEASURE_TYPE_RPI 2 + +/* Measurement Mode field */ + +/* Measurement Request Modes */ +#define DOT11_MEASURE_MODE_ENABLE (1<<1) +#define DOT11_MEASURE_MODE_REQUEST (1<<2) +#define DOT11_MEASURE_MODE_REPORT (1<<3) +/* Measurement Report Modes */ +#define DOT11_MEASURE_MODE_LATE (1<<0) +#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) +#define DOT11_MEASURE_MODE_REFUSED (1<<2) +/* Basic Measurement Map bits */ +#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) +#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) +#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) +#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) +#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) + +typedef struct { + uint8 id; + uint8 len; + uint8 token; + uint8 mode; + uint8 type; + uint8 channel; + uint8 start_time[8]; + uint16 duration; +} dot11_meas_req_t; +#define DOT11_MNG_IE_MREQ_LEN 14 +/* length of Measure Request IE data not including variable len */ +#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 + +struct dot11_meas_rep { + uint8 id; + uint8 len; + uint8 token; + uint8 mode; + uint8 type; + union + { + struct { + uint8 channel; + uint8 start_time[8]; + uint16 duration; + uint8 map; + } PACKED basic; + uint8 data[1]; + } PACKED rep; +} PACKED; +typedef struct dot11_meas_rep dot11_meas_rep_t; + +/* length of Measure Report IE data not including variable len */ +#define DOT11_MNG_IE_MREP_FIXED_LEN 3 + +struct dot11_meas_rep_basic { + uint8 channel; + uint8 start_time[8]; + uint16 duration; + uint8 map; +} PACKED; +typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; +#define DOT11_MEASURE_BASIC_REP_LEN 12 + +struct dot11_quiet { + uint8 id; + uint8 len; + uint8 count; /* TBTTs until beacon interval in quiet starts */ + uint8 period; /* Beacon intervals between periodic quiet periods ? */ + uint16 duration;/* Length of quiet period, in TU's */ + uint16 offset; /* TU's offset from TBTT in Count field */ +} PACKED; +typedef struct dot11_quiet dot11_quiet_t; + +typedef struct { + uint8 channel; + uint8 map; +} chan_map_tuple_t; + +typedef struct { + uint8 id; + uint8 len; + uint8 eaddr[ETHER_ADDR_LEN]; + uint8 interval; + chan_map_tuple_t map[1]; +} dot11_ibss_dfs_t; + +/* WME Elements */ +#define WME_OUI "\x00\x50\xf2" +#define WME_VER 1 +#define WME_TYPE 2 +#define WME_SUBTYPE_IE 0 /* Information Element */ +#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */ +#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */ + +/* WME Access Category Indices (ACIs) */ +#define AC_BE 0 /* Best Effort */ +#define AC_BK 1 /* Background */ +#define AC_VI 2 /* Video */ +#define AC_VO 3 /* Voice */ +#define AC_MAX 4 + +/* WME Information Element (IE) */ +struct wme_ie { + uint8 oui[3]; + uint8 type; + uint8 subtype; + uint8 version; + uint8 acinfo; +} PACKED; +typedef struct wme_ie wme_ie_t; +#define WME_IE_LEN 7 + +struct wme_acparam { + uint8 ACI; + uint8 ECW; + uint16 TXOP; /* stored in network order (ls octet first) */ +} PACKED; +typedef struct wme_acparam wme_acparam_t; + +/* WME Parameter Element (PE) */ +struct wme_params { + uint8 oui[3]; + uint8 type; + uint8 subtype; + uint8 version; + uint8 acinfo; + uint8 rsvd; + wme_acparam_t acparam[4]; +} PACKED; +typedef struct wme_params wme_params_t; +#define WME_PARAMS_IE_LEN 24 + +/* acinfo */ +#define WME_COUNT_MASK 0x0f +/* ACI */ +#define WME_AIFS_MASK 0x0f +#define WME_ACM_MASK 0x10 +#define WME_ACI_MASK 0x60 +#define WME_ACI_SHIFT 5 +/* ECW */ +#define WME_CWMIN_MASK 0x0f +#define WME_CWMAX_MASK 0xf0 +#define WME_CWMAX_SHIFT 4 + +#define WME_TXOP_UNITS 32 + +/* WME Traffic Specification (TSPEC) element */ +#define WME_SUBTYPE_TSPEC 2 +#define WME_TSPEC_HDR_LEN 2 +#define WME_TSPEC_BODY_OFF 2 +struct wme_tspec { + uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */ + uint8 type; /* WME_TYPE */ + uint8 subtype; /* WME_SUBTYPE_TSPEC */ + uint8 version; /* WME_VERSION */ + uint16 ts_info; /* TS Info */ + uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */ + uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */ + uint32 min_service_interval; /* Minimum Service Interval (us) */ + uint32 max_service_interval; /* Maximum Service Interval (us) */ + uint32 inactivity_interval; /* Inactivity Interval (us) */ + uint32 service_start; /* Service Start Time (us) */ + uint32 min_rate; /* Minimum Data Rate (bps) */ + uint32 mean_rate; /* Mean Data Rate (bps) */ + uint32 max_burst_size; /* Maximum Burst Size (bytes) */ + uint32 min_phy_rate; /* Minimum PHY Rate (bps) */ + uint32 peak_rate; /* Peak Data Rate (bps) */ + uint32 delay_bound; /* Delay Bound (us) */ + uint16 surplus_bandwidth; /* Surplus Bandwidth Allowance Factor */ + uint16 medium_time; /* Medium Time (32 us/s periods) */ +} PACKED; +typedef struct wme_tspec wme_tspec_t; +#define WME_TSPEC_LEN 56 /* not including 2-byte header */ + +/* ts_info */ +/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */ +#define TS_INFO_PRIO_SHIFT_HI 11 +#define TS_INFO_PRIO_MASK_HI (0x7 << TS_INFO_PRIO_SHIFT_HI) +#define TS_INFO_PRIO_SHIFT_LO 1 +#define TS_INFO_PRIO_MASK_LO (0x7 << TS_INFO_PRIO_SHIFT_LO) +#define TS_INFO_CONTENTION_SHIFT 7 +#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) +#define TS_INFO_DIRECTION_SHIFT 5 +#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) +#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) +#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) +#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) + +/* nom_msdu_size */ +#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */ +#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */ + +/* surplus_bandwidth */ +/* Represented as 3 bits of integer, binary point, 13 bits fraction */ +#define INTEGER_SHIFT 13 +#define FRACTION_MASK 0x1FFF + +/* Management Notification Frame */ +struct dot11_management_notification { + uint8 category; /* DOT11_ACTION_NOTIFICATION */ + uint8 action; + uint8 token; + uint8 status; + uint8 data[1]; /* Elements */ +} PACKED; +#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */ + +/* WME Action Codes */ +#define WME_SETUP_REQUEST 0 +#define WME_SETUP_RESPONSE 1 +#define WME_TEARDOWN 2 + +/* WME Setup Response Status Codes */ +#define WME_ADMISSION_ACCEPTED 0 +#define WME_INVALID_PARAMETERS 1 +#define WME_ADMISSION_REFUSED 3 + +/* Macro to take a pointer to a beacon or probe response + * header and return the char* pointer to the SSID info element + */ +#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) + +/* Authentication frame payload constants */ +#define DOT11_OPEN_SYSTEM 0 +#define DOT11_SHARED_KEY 1 +#define DOT11_CHALLENGE_LEN 128 + +/* Frame control macros */ +#define FC_PVER_MASK 0x3 +#define FC_PVER_SHIFT 0 +#define FC_TYPE_MASK 0xC +#define FC_TYPE_SHIFT 2 +#define FC_SUBTYPE_MASK 0xF0 +#define FC_SUBTYPE_SHIFT 4 +#define FC_TODS 0x100 +#define FC_TODS_SHIFT 8 +#define FC_FROMDS 0x200 +#define FC_FROMDS_SHIFT 9 +#define FC_MOREFRAG 0x400 +#define FC_MOREFRAG_SHIFT 10 +#define FC_RETRY 0x800 +#define FC_RETRY_SHIFT 11 +#define FC_PM 0x1000 +#define FC_PM_SHIFT 12 +#define FC_MOREDATA 0x2000 +#define FC_MOREDATA_SHIFT 13 +#define FC_WEP 0x4000 +#define FC_WEP_SHIFT 14 +#define FC_ORDER 0x8000 +#define FC_ORDER_SHIFT 15 + +/* sequence control macros */ +#define SEQNUM_SHIFT 4 +#define FRAGNUM_MASK 0xF + +/* Frame Control type/subtype defs */ + +/* FC Types */ +#define FC_TYPE_MNG 0 +#define FC_TYPE_CTL 1 +#define FC_TYPE_DATA 2 + +/* Management Subtypes */ +#define FC_SUBTYPE_ASSOC_REQ 0 +#define FC_SUBTYPE_ASSOC_RESP 1 +#define FC_SUBTYPE_REASSOC_REQ 2 +#define FC_SUBTYPE_REASSOC_RESP 3 +#define FC_SUBTYPE_PROBE_REQ 4 +#define FC_SUBTYPE_PROBE_RESP 5 +#define FC_SUBTYPE_BEACON 8 +#define FC_SUBTYPE_ATIM 9 +#define FC_SUBTYPE_DISASSOC 10 +#define FC_SUBTYPE_AUTH 11 +#define FC_SUBTYPE_DEAUTH 12 +#define FC_SUBTYPE_ACTION 13 + +/* Control Subtypes */ +#define FC_SUBTYPE_PS_POLL 10 +#define FC_SUBTYPE_RTS 11 +#define FC_SUBTYPE_CTS 12 +#define FC_SUBTYPE_ACK 13 +#define FC_SUBTYPE_CF_END 14 +#define FC_SUBTYPE_CF_END_ACK 15 + +/* Data Subtypes */ +#define FC_SUBTYPE_DATA 0 +#define FC_SUBTYPE_DATA_CF_ACK 1 +#define FC_SUBTYPE_DATA_CF_POLL 2 +#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 +#define FC_SUBTYPE_NULL 4 +#define FC_SUBTYPE_CF_ACK 5 +#define FC_SUBTYPE_CF_POLL 6 +#define FC_SUBTYPE_CF_ACK_POLL 7 +#define FC_SUBTYPE_QOS_DATA 8 +#define FC_SUBTYPE_QOS_NULL 12 + +/* type-subtype combos */ +#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) + +#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) + +#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) +#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) +#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) +#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) +#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) +#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) +#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) +#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) +#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) +#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) +#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) + +#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) +#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) +#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) +#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) +#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) +#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) + +#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) +#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) +#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) +#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA) +#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL) + +/* QoS Control Field */ + +/* 802.1D Tag */ +#define QOS_PRIO_SHIFT 0 +#define QOS_PRIO_MASK 0x0007 +#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT) + +/* Ack Policy (0 means Acknowledge) */ +#define QOS_ACK_SHIFT 5 +#define QOS_ACK_MASK 0x0060 +#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT) + +/* Management Frames */ + +/* Management Frame Constants */ + +/* Fixed fields */ +#define DOT11_MNG_AUTH_ALGO_LEN 2 +#define DOT11_MNG_AUTH_SEQ_LEN 2 +#define DOT11_MNG_BEACON_INT_LEN 2 +#define DOT11_MNG_CAP_LEN 2 +#define DOT11_MNG_AP_ADDR_LEN 6 +#define DOT11_MNG_LISTEN_INT_LEN 2 +#define DOT11_MNG_REASON_LEN 2 +#define DOT11_MNG_AID_LEN 2 +#define DOT11_MNG_STATUS_LEN 2 +#define DOT11_MNG_TIMESTAMP_LEN 8 + +/* DUR/ID field in assoc resp is 0xc000 | AID */ +#define DOT11_AID_MASK 0x3fff + +/* Reason Codes */ +#define DOT11_RC_RESERVED 0 +#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ +#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ +#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is + leaving (or has left) IBSS or ESS */ +#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ +#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle + all currently associated stations */ +#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from + nonauthenticated station */ +#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from + nonassociated station */ +#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is + leaving (or has left) BSS */ +#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is + not authenticated with responding station */ +#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ + +/* Status Codes */ +#define DOT11_STATUS_SUCCESS 0 /* Successful */ +#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ +#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities + in the Capability Information field */ +#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to + confirm that association exists */ +#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside + the scope of this standard */ +#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the + specified authentication algorithm */ +#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with + authentication transaction sequence number + out of expected sequence */ +#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ +#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting + for next frame in sequence */ +#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to + handle additional associated stations */ +#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station + not supporting all of the data rates in the + BSSBasicRateSet parameter */ +#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station + not supporting the Short Preamble option */ +#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station + not supporting the PBCC Modulation option */ +#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station + not supporting the Channel Agility option */ +#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management + capability is required. */ +#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the + Power Cap element is unacceptable. */ +#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the + Supported Channel element is unacceptable */ +#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station + not supporting the Short Slot Time option */ +#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station + not supporting the ER-PBCC Modulation option */ +#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station + not supporting the DSS-OFDM option */ + +/* Info Elts, length of INFORMATION portion of Info Elts */ +#define DOT11_MNG_DS_PARAM_LEN 1 +#define DOT11_MNG_IBSS_PARAM_LEN 2 + +/* TIM Info element has 3 bytes fixed info in INFORMATION field, + * followed by 1 to 251 bytes of Partial Virtual Bitmap */ +#define DOT11_MNG_TIM_FIXED_LEN 3 +#define DOT11_MNG_TIM_DTIM_COUNT 0 +#define DOT11_MNG_TIM_DTIM_PERIOD 1 +#define DOT11_MNG_TIM_BITMAP_CTL 2 +#define DOT11_MNG_TIM_PVB 3 + +/* TLV defines */ +#define TLV_TAG_OFF 0 +#define TLV_LEN_OFF 1 +#define TLV_HDR_LEN 2 +#define TLV_BODY_OFF 2 + +/* Management Frame Information Element IDs */ +#define DOT11_MNG_SSID_ID 0 +#define DOT11_MNG_RATES_ID 1 +#define DOT11_MNG_FH_PARMS_ID 2 +#define DOT11_MNG_DS_PARMS_ID 3 +#define DOT11_MNG_CF_PARMS_ID 4 +#define DOT11_MNG_TIM_ID 5 +#define DOT11_MNG_IBSS_PARMS_ID 6 +#define DOT11_MNG_COUNTRY_ID 7 +#define DOT11_MNG_HOPPING_PARMS_ID 8 +#define DOT11_MNG_HOPPING_TABLE_ID 9 +#define DOT11_MNG_REQUEST_ID 10 +#define DOT11_MNG_CHALLENGE_ID 16 +#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ +#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ +#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ +#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ +#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ +#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ +#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ +#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ +#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ +#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ +#define DOT11_MNG_ERP_ID 42 +#define DOT11_MNG_NONERP_ID 47 +#define DOT11_MNG_EXT_RATES_ID 50 +#define DOT11_MNG_WPA_ID 221 +#define DOT11_MNG_PROPR_ID 221 + +/* ERP info element bit values */ +#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ +#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ +#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ +#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ + +/* Capability Information Field */ +#define DOT11_CAP_ESS 0x0001 +#define DOT11_CAP_IBSS 0x0002 +#define DOT11_CAP_POLLABLE 0x0004 +#define DOT11_CAP_POLL_RQ 0x0008 +#define DOT11_CAP_PRIVACY 0x0010 +#define DOT11_CAP_SHORT 0x0020 +#define DOT11_CAP_PBCC 0x0040 +#define DOT11_CAP_AGILITY 0x0080 +#define DOT11_CAP_SPECTRUM 0x0100 +#define DOT11_CAP_SHORTSLOT 0x0400 +#define DOT11_CAP_CCK_OFDM 0x2000 + +/* Action Frame Constants */ +#define DOT11_ACTION_CAT_ERR_MASK 0x80 +#define DOT11_ACTION_CAT_SPECT_MNG 0x00 +#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */ + +#define DOT11_ACTION_ID_M_REQ 0 +#define DOT11_ACTION_ID_M_REP 1 +#define DOT11_ACTION_ID_TPC_REQ 2 +#define DOT11_ACTION_ID_TPC_REP 3 +#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 + +/* MLME Enumerations */ +#define DOT11_BSSTYPE_INFRASTRUCTURE 0 +#define DOT11_BSSTYPE_INDEPENDENT 1 +#define DOT11_BSSTYPE_ANY 2 +#define DOT11_SCANTYPE_ACTIVE 0 +#define DOT11_SCANTYPE_PASSIVE 1 + +/* 802.11 A PHY constants */ +#define APHY_SLOT_TIME 9 +#define APHY_SIFS_TIME 16 +#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) +#define APHY_PREAMBLE_TIME 16 +#define APHY_SIGNAL_TIME 4 +#define APHY_SYMBOL_TIME 4 +#define APHY_SERVICE_NBITS 16 +#define APHY_TAIL_NBITS 6 +#define APHY_CWMIN 15 + +/* 802.11 B PHY constants */ +#define BPHY_SLOT_TIME 20 +#define BPHY_SIFS_TIME 10 +#define BPHY_DIFS_TIME 50 +#define BPHY_PLCP_TIME 192 +#define BPHY_PLCP_SHORT_TIME 96 +#define BPHY_CWMIN 31 + +/* 802.11 G constants */ +#define DOT11_OFDM_SIGNAL_EXTENSION 6 + +#define PHY_CWMAX 1023 + +#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ + +/* dot11Counters Table - 802.11 spec., Annex D */ +typedef struct d11cnt { + uint32 txfrag; /* dot11TransmittedFragmentCount */ + uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ + uint32 txfail; /* dot11FailedCount */ + uint32 txretry; /* dot11RetryCount */ + uint32 txretrie; /* dot11MultipleRetryCount */ + uint32 rxdup; /* dot11FrameduplicateCount */ + uint32 txrts; /* dot11RTSSuccessCount */ + uint32 txnocts; /* dot11RTSFailureCount */ + uint32 txnoack; /* dot11ACKFailureCount */ + uint32 rxfrag; /* dot11ReceivedFragmentCount */ + uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ + uint32 rxcrc; /* dot11FCSErrorCount */ + uint32 txfrmsnt; /* dot11TransmittedFrameCount */ + uint32 rxundec; /* dot11WEPUndecryptableCount */ +} d11cnt_t; + +/* BRCM OUI */ +#define BRCM_OUI "\x00\x10\x18" + +/* BRCM info element */ +struct brcm_ie { + uchar id; + uchar len; + uchar oui[3]; + uchar ver; + uchar assoc; /* # of assoc STAs */ + uchar flags; /* misc flags */ +} PACKED; +#define BRCM_IE_LEN 8 +typedef struct brcm_ie brcm_ie_t; +#define BRCM_IE_VER 1 + +/* brcm_ie flags */ +#define BRF_ABCAP 0x1 /* afterburner capable */ +#define BRF_ABRQRD 0x2 /* afterburner requested */ + +/* WPA definitions */ +#define WPA_VERSION 1 +#define WPA_OUI "\x00\x50\xF2" + +#define WPA_OUI_LEN 3 + +/* WPA authentication modes */ +#define WPA_AUTH_NONE 0 /* None */ +#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */ +#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */ +#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */ + +#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \ + (auth) == WPA_AUTH_UNSPECIFIED || \ + (auth) == WPA_AUTH_PSK) + + +/* Key related defines */ +#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */ +#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ +#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ +#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ + +#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ +#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ +#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ +#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ +#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ +#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ +#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ +#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ +#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ +#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ +#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ +#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ +#define AES_KEY_SIZE 16 /* size of AES key */ + +#undef PACKED +#if !defined(__GNUC__) +#pragma pack() +#endif + +#endif /* _802_11_H_ */ diff --git a/openwrt/target/linux/package/openwrt/include/proto/ethernet.h b/openwrt/target/linux/package/openwrt/include/proto/ethernet.h new file mode 100644 index 000000000..173464af6 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/proto/ethernet.h @@ -0,0 +1,179 @@ +/******************************************************************************* + * $Id$ + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. + ******************************************************************************/ + +#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ +#define _NET_ETHERNET_H_ + +#ifndef _TYPEDEFS_H_ +#include "typedefs.h" +#endif + +#if defined(__GNUC__) +#define PACKED __attribute__((packed)) +#else +#define PACKED +#endif + +/* + * The number of bytes in an ethernet (MAC) address. + */ +#ifndef ETHER_ADDR_LEN +#define ETHER_ADDR_LEN 6 +#endif + +/* + * The number of bytes in the type field. + */ +#ifndef ETHER_TYPE_LEN +#define ETHER_TYPE_LEN 2 +#endif + +/* + * The number of bytes in the trailing CRC field. + */ +#ifndef ETHER_CRC_LEN +#define ETHER_CRC_LEN 4 +#endif + +/* + * The length of the combined header. + */ +#ifndef ETHER_HDR_LEN +#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) +#endif + +/* + * The minimum packet length. + */ +#ifndef ETHER_MIN_LEN +#define ETHER_MIN_LEN 64 +#endif + +/* + * The minimum packet user data length. + */ +#ifndef ETHER_MIN_DATA +#define ETHER_MIN_DATA 46 +#endif + +/* + * The maximum packet length. + */ +#ifndef ETHER_MAX_LEN +#define ETHER_MAX_LEN 1518 +#endif + +/* + * The maximum packet user data length. + */ +#define ETHER_MAX_DATA 1500 + +/* + * Used to uniquely identify a 802.1q VLAN-tagged header. + */ +#define VLAN_TAG 0x8100 + +/* + * Located after dest & src address in ether header. + */ +#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) + +/* + * 4 bytes of vlan field info. + */ +#define VLAN_FIELDS_SIZE 4 + +/* location of bits in 16-bit vlan fields */ +#define VLAN_PRI_SHIFT 13 /* user priority */ +#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */ + +/* 3 bits of priority */ +#define VLAN_PRI_MASK 7 +/* 12 bits of vlan identfier (VID) */ +#define VLAN_VID_MASK 0xFFF /* VLAN identifier (VID) field */ + +struct vlan_tags { + uint16 tag_type; /* 0x8100 for VLAN */ + uint16 tag_control; /* prio | cfi | vid */ +} PACKED ; + +/* 802.1X ethertype */ + +#define ETHER_TYPE_IP 0x0800 /* IP */ +#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */ +#define ETHER_TYPE_802_1X 0x888e /* 802.1x */ + +#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4byte subtype follows ethertype */ +#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */ + +/* + * A macro to validate a length with + */ +#define ETHER_IS_VALID_LEN(foo) \ + ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) + +#ifndef __NET_ETHERNET_H +#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ +/* + * Structure of a 10Mb/s Ethernet header. + */ +struct ether_header { + uint8 ether_dhost[ETHER_ADDR_LEN]; + uint8 ether_shost[ETHER_ADDR_LEN]; + uint16 ether_type; +} PACKED ; + +/* + * Structure of a 48-bit Ethernet address. + */ +struct ether_addr { + uint8 octet[ETHER_ADDR_LEN]; +} PACKED ; +#endif +#endif + +/* + * Takes a pointer, returns true if a 48-bit multicast address + * (including broadcast, since it is all ones) + */ +#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) + +/* + * Takes a pointer, returns true if a 48-bit broadcast (all ones) + */ +#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ + ((uint8 *)(ea))[1] & \ + ((uint8 *)(ea))[2] & \ + ((uint8 *)(ea))[3] & \ + ((uint8 *)(ea))[4] & \ + ((uint8 *)(ea))[5]) == 0xff) + +static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; + +/* + * Takes a pointer, returns true if a 48-bit null address (all zeros) + */ +#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ + ((uint8 *)(ea))[1] | \ + ((uint8 *)(ea))[2] | \ + ((uint8 *)(ea))[3] | \ + ((uint8 *)(ea))[4] | \ + ((uint8 *)(ea))[5]) == 0) + +/* Differentiated Services Codepoint - lower 6 bits of tos in iphdr */ +#define DSCP_PRI_MASK 0x3F /* bits 0-6 */ +#define DSCP_WME_PRI_MASK 0x38 /* bits 3-6 */ +#define DSCP_WME_PRI_SHIFT 3 + +#undef PACKED + +#endif /* _NET_ETHERNET_H_ */ diff --git a/openwrt/target/linux/package/openwrt/include/shutils.h b/openwrt/target/linux/package/openwrt/include/shutils.h new file mode 100644 index 000000000..783ee9ede --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/shutils.h @@ -0,0 +1,200 @@ +/* + * Shell-like utility functions + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _shutils_h_ +#define _shutils_h_ +#include <string.h> +/* + * Reads file and returns contents + * @param fd file descriptor + * @return contents of file or NULL if an error occurred + */ +extern char * fd2str(int fd); + +/* + * Reads file and returns contents + * @param path path to file + * @return contents of file or NULL if an error occurred + */ +extern char * file2str(const char *path); + +/* + * Waits for a file descriptor to become available for reading or unblocked signal + * @param fd file descriptor + * @param timeout seconds to wait before timing out or 0 for no timeout + * @return 1 if descriptor changed status or 0 if timed out or -1 on error + */ +extern int waitfor(int fd, int timeout); + +/* + * Concatenates NULL-terminated list of arguments into a single + * commmand and executes it + * @param argv argument list + * @param path NULL, ">output", or ">>output" + * @param timeout seconds to wait before timing out or 0 for no timeout + * @param ppid NULL to wait for child termination or pointer to pid + * @return return value of executed command or errno + */ +extern int _eval(char *const argv[], char *path, int timeout, pid_t *ppid); + +/* + * Concatenates NULL-terminated list of arguments into a single + * commmand and executes it + * @param argv argument list + * @return stdout of executed command or NULL if an error occurred + */ +extern char * _backtick(char *const argv[]); + +/* + * Kills process whose PID is stored in plaintext in pidfile + * @param pidfile PID file + * @return 0 on success and errno on failure + */ +extern int kill_pidfile(char *pidfile); + +/* + * fread() with automatic retry on syscall interrupt + * @param ptr location to store to + * @param size size of each element of data + * @param nmemb number of elements + * @param stream file stream + * @return number of items successfully read + */ +extern int safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream); + +/* + * fwrite() with automatic retry on syscall interrupt + * @param ptr location to read from + * @param size size of each element of data + * @param nmemb number of elements + * @param stream file stream + * @return number of items successfully written + */ +extern int safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream); + +/* + * Convert Ethernet address string representation to binary data + * @param a string in xx:xx:xx:xx:xx:xx notation + * @param e binary data + * @return TRUE if conversion was successful and FALSE otherwise + */ +extern int ether_atoe(const char *a, unsigned char *e); + +/* + * Convert Ethernet address binary data to string representation + * @param e binary data + * @param a string in xx:xx:xx:xx:xx:xx notation + * @return a + */ +extern char * ether_etoa(const unsigned char *e, char *a); + +/* + * Concatenate two strings together into a caller supplied buffer + * @param s1 first string + * @param s2 second string + * @param buf buffer large enough to hold both strings + * @return buf + */ +static inline char * strcat_r(const char *s1, const char *s2, char *buf) +{ + strcpy(buf, s1); + strcat(buf, s2); + return buf; +} + +/* Check for a blank character; that is, a space or a tab */ +#define isblank(c) ((c) == ' ' || (c) == '\t') + +/* Strip trailing CR/NL from string <s> */ +#define chomp(s) ({ \ + char *c = (s) + strlen((s)) - 1; \ + while ((c > (s)) && (*c == '\n' || *c == '\r' || *c == ' ')) \ + *c-- = '\0'; \ + s; \ +}) + +/* Simple version of _backtick() */ +#define backtick(cmd, args...) ({ \ + char *argv[] = { cmd, ## args, NULL }; \ + _backtick(argv); \ +}) + +/* Simple version of _eval() (no timeout and wait for child termination) */ +#define eval(cmd, args...) ({ \ + char *argv[] = { cmd, ## args, NULL }; \ + _eval(argv, ">/dev/console", 0, NULL); \ +}) + +/* Copy each token in wordlist delimited by space into word */ +#define foreach(word, wordlist, next) \ + for (next = &wordlist[strspn(wordlist, " ")], \ + strncpy(word, next, sizeof(word)), \ + word[strcspn(word, " ")] = '\0', \ + word[sizeof(word) - 1] = '\0', \ + next = strchr(next, ' '); \ + strlen(word); \ + next = next ? &next[strspn(next, " ")] : "", \ + strncpy(word, next, sizeof(word)), \ + word[strcspn(word, " ")] = '\0', \ + word[sizeof(word) - 1] = '\0', \ + next = strchr(next, ' ')) + +/* Return NUL instead of NULL if undefined */ +#define safe_getenv(s) (getenv(s) ? : "") + +/* Print directly to the console */ +#define cprintf(fmt, args...) do { \ + FILE *fp = fopen("/dev/console", "w"); \ + if (fp) { \ + fprintf(fp, fmt, ## args); \ + fclose(fp); \ + } \ +} while (0) + +/* Debug print */ +#ifdef DEBUG +#define dprintf(fmt, args...) cprintf("%s: " fmt, __FUNCTION__, ## args) +#else +#define dprintf(fmt, args...) +#endif + +#ifdef vxworks + +#include <inetLib.h> +#define inet_aton(a, n) ((inet_aton((a), (n)) == ERROR) ? 0 : 1) +#define inet_ntoa(n) ({ char a[INET_ADDR_LEN]; inet_ntoa_b ((n), a); a; }) + +#include <typedefs.h> +#include <bcmutils.h> +#define ether_atoe(a, e) bcm_ether_atoe((a), (e)) +#define ether_etoa(e, a) bcm_ether_ntoa((e), (a)) + +/* These declarations are not available where you would expect them */ +extern int vsnprintf (char *, size_t, const char *, va_list); +extern int snprintf(char *str, size_t count, const char *fmt, ...); +extern char *strdup(const char *); +extern char *strsep(char **stringp, char *delim); +extern int strcasecmp(const char *s1, const char *s2); +extern int strncasecmp(const char *s1, const char *s2, size_t n); + +/* Neither are socket() and connect() */ +#include <sockLib.h> + +#ifdef DEBUG +#undef dprintf +#define dprintf printf +#endif +#endif + +#endif /* _shutils_h_ */ diff --git a/openwrt/target/linux/package/openwrt/include/typedefs.h b/openwrt/target/linux/package/openwrt/include/typedefs.h new file mode 100644 index 000000000..6b0c25e04 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/typedefs.h @@ -0,0 +1,293 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _TYPEDEFS_H_ +#define _TYPEDEFS_H_ + + +/* Define 'SITE_TYPEDEFS' in the compile to include a site specific + * typedef file "site_typedefs.h". + * + * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" + * section of this file makes inferences about the compile environment + * based on defined symbols and possibly compiler pragmas. + * + * Following these two sections is the "Default Typedefs" + * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is + * defined. This section has a default set of typedefs and a few + * proprocessor symbols (TRUE, FALSE, NULL, ...). + */ + +#ifdef SITE_TYPEDEFS + +/******************************************************************************* + * Site Specific Typedefs + *******************************************************************************/ + +#include "site_typedefs.h" + +#else + +/******************************************************************************* + * Inferred Typedefs + *******************************************************************************/ + +/* Infer the compile environment based on preprocessor symbols and pramas. + * Override type definitions as needed, and include configuration dependent + * header files to define types. + */ + +#ifdef __cplusplus + +#define TYPEDEF_BOOL +#ifndef FALSE +#define FALSE false +#endif +#ifndef TRUE +#define TRUE true +#endif + +#else /* ! __cplusplus */ + +/* for Windows build, define bool as a uchar instead of the default int */ +#if defined(_WIN32) + +#define TYPEDEF_BOOL +typedef unsigned char bool; + +#endif /* _WIN32 */ + +#endif /* ! __cplusplus */ + +#ifdef _MSC_VER /* Microsoft C */ +#define TYPEDEF_INT64 +#define TYPEDEF_UINT64 +typedef signed __int64 int64; +typedef unsigned __int64 uint64; +#endif + +#if defined(MACOSX) && defined(KERNEL) +#define TYPEDEF_BOOL +#endif + + +#if defined(linux) +#define TYPEDEF_UINT +#define TYPEDEF_USHORT +#define TYPEDEF_ULONG +#endif + +#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) +#define TYPEDEF_UINT +#define TYPEDEF_USHORT +#endif + + +/* Do not support the (u)int64 types with strict ansi for GNU C */ +#if defined(__GNUC__) && defined(__STRICT_ANSI__) +#define TYPEDEF_INT64 +#define TYPEDEF_UINT64 +#endif + +/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode + * for singned or unsigned */ +#if defined(__ICL) + +#define TYPEDEF_INT64 + +#if defined(__STDC__) +#define TYPEDEF_UINT64 +#endif + +#endif /* __ICL */ + + +#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) + +/* pick up ushort & uint from standard types.h */ +#if defined(linux) && defined(__KERNEL__) + +#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */ + +#else + +#include <sys/types.h> + +#endif + +#endif /* !_WIN32 && !PMON && !_CFE_ */ + +#if defined(MACOSX) && defined(KERNEL) +#include <IOKit/IOTypes.h> +#endif + + +/* use the default typedefs in the next section of this file */ +#define USE_TYPEDEF_DEFAULTS + +#endif /* SITE_TYPEDEFS */ + + +/******************************************************************************* + * Default Typedefs + *******************************************************************************/ + +#ifdef USE_TYPEDEF_DEFAULTS +#undef USE_TYPEDEF_DEFAULTS + +#ifndef TYPEDEF_BOOL +typedef int bool; +#endif + +/*----------------------- define uchar, ushort, uint, ulong ----------------*/ + +#ifndef TYPEDEF_UCHAR +typedef unsigned char uchar; +#endif + +#ifndef TYPEDEF_USHORT +typedef unsigned short ushort; +#endif + +#ifndef TYPEDEF_UINT +typedef unsigned int uint; +#endif + +#ifndef TYPEDEF_ULONG +typedef unsigned long ulong; +#endif + +/*----------------------- define [u]int8/16/32/64 --------------------------*/ + +#ifndef TYPEDEF_UINT8 +typedef unsigned char uint8; +#endif + +#ifndef TYPEDEF_UINT16 +typedef unsigned short uint16; +#endif + +#ifndef TYPEDEF_UINT32 +typedef unsigned int uint32; +#endif + +#ifndef TYPEDEF_UINT64 +typedef unsigned long long uint64; +#endif + +#ifndef TYPEDEF_INT8 +typedef signed char int8; +#endif + +#ifndef TYPEDEF_INT16 +typedef signed short int16; +#endif + +#ifndef TYPEDEF_INT32 +typedef signed int int32; +#endif + +#ifndef TYPEDEF_INT64 +typedef signed long long int64; +#endif + +/*----------------------- define float32/64, float_t -----------------------*/ + +#ifndef TYPEDEF_FLOAT32 +typedef float float32; +#endif + +#ifndef TYPEDEF_FLOAT64 +typedef double float64; +#endif + +/* + * abstracted floating point type allows for compile time selection of + * single or double precision arithmetic. Compiling with -DFLOAT32 + * selects single precision; the default is double precision. + */ + +#ifndef TYPEDEF_FLOAT_T + +#if defined(FLOAT32) +typedef float32 float_t; +#else /* default to double precision floating point */ +typedef float64 float_t; +#endif + +#endif /* TYPEDEF_FLOAT_T */ + +/*----------------------- define macro values -----------------------------*/ + +#ifndef FALSE +#define FALSE 0 +#endif + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef NULL +#define NULL 0 +#endif + +#ifndef OFF +#define OFF 0 +#endif + +#ifndef ON +#define ON 1 +#endif + +/*----------------------- define PTRSZ, INLINE ----------------------------*/ + +#ifndef PTRSZ +#define PTRSZ sizeof (char*) +#endif + +#ifndef INLINE + +#ifdef _MSC_VER + +#define INLINE __inline + +#elif __GNUC__ + +#define INLINE __inline__ + +#else + +#define INLINE + +#endif /* _MSC_VER */ + +#endif /* INLINE */ + +#undef TYPEDEF_BOOL +#undef TYPEDEF_UCHAR +#undef TYPEDEF_USHORT +#undef TYPEDEF_UINT +#undef TYPEDEF_ULONG +#undef TYPEDEF_UINT8 +#undef TYPEDEF_UINT16 +#undef TYPEDEF_UINT32 +#undef TYPEDEF_UINT64 +#undef TYPEDEF_INT8 +#undef TYPEDEF_INT16 +#undef TYPEDEF_INT32 +#undef TYPEDEF_INT64 +#undef TYPEDEF_FLOAT32 +#undef TYPEDEF_FLOAT64 +#undef TYPEDEF_FLOAT_T + +#endif /* USE_TYPEDEF_DEFAULTS */ + +#endif /* _TYPEDEFS_H_ */ diff --git a/openwrt/target/linux/package/openwrt/include/utils.h b/openwrt/target/linux/package/openwrt/include/utils.h new file mode 100644 index 000000000..b8d1cdb7b --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/utils.h @@ -0,0 +1,131 @@ +#include <cy_conf.h> + +extern int diag_led(int type, int act); +extern int C_led(int i); +extern int get_single_ip(char *ipaddr, int which); +extern char *get_mac_from_ip(char *ip); +extern struct dns_lists *get_dns_list(int no); +extern int dns_to_resolv(void); +extern char *get_wan_face(void); +extern int check_wan_link(int num); +extern char *get_complete_lan_ip(char *ip); +extern int get_int_len(int num); +extern int file_to_buf(char *path, char *buf, int len); +extern int buf_to_file(char *path, char *buf); +extern pid_t* find_pid_by_name( char* pidName); +extern int find_pid_by_ps(char* pidName); +extern int *find_all_pid_by_ps(char* pidName); +extern char *find_name_by_proc(int pid); +extern int get_ppp_pid(char *file); +extern long convert_ver(char *ver); +extern int check_flash(void); +extern int check_action(void); +extern int check_now_boot(void); +extern int check_hw_type(void); +extern int is_exist(char *filename); +extern void set_ip_forward(char c); +struct mtu_lists *get_mtu(char *proto); +extern void set_host_domain_name(void); + +extern void encode(char *buf, int len); +extern void decode(char *buf, int len); + +extern int sys_netdev_ioctl(int family, int socket, char *if_name, int cmd, struct ifreq *ifr); + +int ct_openlog(const char *ident, int option, int facility, char *log_name); +void ct_syslog(int level, int enable, const char *fmt,...); +void ct_logger(int level, const char *fmt,...); +struct wl_assoc_mac * get_wl_assoc_mac(int *c); + + + +enum { DMZ, SESSION, DIAG , WL}; + +enum { START_LED, STOP_LED }; + +typedef enum { ACT_IDLE, + ACT_TFTP_UPGRADE, + ACT_WEB_UPGRADE, + ACT_WEBS_UPGRADE, + ACT_SW_RESTORE, + ACT_HW_RESTORE } ACTION; + +enum { UNKNOWN_BOOT = -1, PMON_BOOT, CFE_BOOT }; + +enum { BCM4702_CHIP, BCM4712_CHIP, BCM5325E_CHIP }; + +enum { FIRST, SECOND }; + +enum { SYSLOG_LOG=1, SYSLOG_DEBUG, CONSOLE_ONLY, LOG_CONSOLE, DEBUG_CONSOLE }; + +#define ACTION(cmd) buf_to_file(ACTION_FILE, cmd) + +struct dns_lists { + int num_servers; + char dns_server[4][16]; +}; + +#define NOT_USING 0 +#define USING 1 + +struct wl_assoc_mac +{ + char mac[18]; +}; + +struct mtu_lists { + char *proto; /* protocol */ + char *min; /* min mtu */ + char *max; /* max mtu */ +}; + + +#define PPP_PSEUDO_IP "10.64.64.64" +#define PPP_PSEUDO_NM "255.255.255.255" +#define PPP_PSEUDO_GW "10.112.112.112" + +#define PING_TMP "/tmp/ping.log" +#define TRACEROUTE_TMP "/tmp/traceroute.log" +#define MAX_BUF_LEN 254 + +#define RESOLV_FILE "/tmp/resolv.conf" +#define HOSTS_FILE "/tmp/hosts" + +#define LOG_FILE "/var/log/mess" + +#define ACTION_FILE "/tmp/action" + + +#define split(word, wordlist, next, delim) \ + for (next = wordlist, \ + strncpy(word, next, sizeof(word)), \ + word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \ + next = next ? next + sizeof(delim) - 1 : NULL ; \ + strlen(word); \ + next = next ? : "", \ + strncpy(word, next, sizeof(word)), \ + word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \ + next = next ? next + sizeof(delim) - 1 : NULL) + +#define STRUCT_LEN(name) sizeof(name)/sizeof(name[0]) + +#define printHEX(str,len) { \ + int i; \ + for (i=0 ; i<len ; i++) { \ + printf("%02X ", (unsigned char)*(str+i)); \ + if(((i+1)%16) == 0) printf("- "); \ + if(((i+1)%32) == 0) printf("\n"); \ + } \ + printf("\n\n"); \ +} + + +#define printASC(str,len) { \ + int i; \ + for (i=0 ; i<len ; i++) { \ + printf("%c", (unsigned char)*(str+i)); \ + if(((i+1)%16) == 0) printf("- "); \ + if(((i+1)%32) == 0) printf("\n"); \ + } \ + printf("\n\n"); \ +} diff --git a/openwrt/target/linux/package/openwrt/include/wlcompat.h b/openwrt/target/linux/package/openwrt/include/wlcompat.h new file mode 100644 index 000000000..a4fc13439 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/wlcompat.h @@ -0,0 +1,36 @@ +/* + * wlcompat.h + * + * Copyright (C) 2005 Felix Fietkau <nbd@vd-s.ath.cx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * $Id$ + */ +#include <linux/wireless.h> + +#ifndef WLCOMPAT_H +#define WLCOMPAT_H + +#define WLCOMPAT_SET_MONITOR SIOCIWFIRSTPRIV + 0 +#define WLCOMPAT_GET_MONITOR SIOCIWFIRSTPRIV + 1 +#define WLCOMPAT_SET_TXPWR_LIMIT SIOCIWFIRSTPRIV + 2 +#define WLCOMPAT_GET_TXPWR_LIMIT SIOCIWFIRSTPRIV + 3 +#define WLCOMPAT_SET_ANTDIV SIOCIWFIRSTPRIV + 4 +#define WLCOMPAT_GET_ANTDIV SIOCIWFIRSTPRIV + 5 +#define WLCOMPAT_SET_TXANT SIOCIWFIRSTPRIV + 6 +#define WLCOMPAT_GET_TXANT SIOCIWFIRSTPRIV + 7 + +#endif diff --git a/openwrt/target/linux/package/openwrt/include/wlioctl.h b/openwrt/target/linux/package/openwrt/include/wlioctl.h new file mode 100644 index 000000000..d5ef11f9e --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/wlioctl.h @@ -0,0 +1,1094 @@ +/* + * Custom OID/ioctl definitions for + * Broadcom 802.11abg Networking Device Driver + * + * Definitions subject to change without notice. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _wlioctl_h_ +#define _wlioctl_h_ + +#include <typedefs.h> +#include <proto/ethernet.h> +#include <proto/802.11.h> + +#if defined(__GNUC__) +#define PACKED __attribute__((packed)) +#else +#define PACKED +#endif + +#define WLC_ESSID_MAX_SIZE 32 + +#define WL_NUMRATES 255 /* max # of rates in a rateset */ + +typedef struct wl_rateset { + uint32 count; /* # rates in this set */ + uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ +} wl_rateset_t; + +#define WL_CHANSPEC_CHAN_MASK 0x0fff +#define WL_CHANSPEC_BAND_MASK 0xf000 +#define WL_CHANSPEC_BAND_SHIFT 12 +#define WL_CHANSPEC_BAND_A 0x1000 +#define WL_CHANSPEC_BAND_B 0x2000 + +/* + * Per-bss information structure. + */ + +#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ +#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ + +typedef struct wl_bss_info106 { + uint version; /* version field */ + struct ether_addr BSSID; + uint8 SSID_len; + uint8 SSID[32]; + uint8 Privacy; /* 0=No WEP, 1=Use WEP */ + int16 RSSI; /* receive signal strength (in dBm) */ + uint16 beacon_period; /* units are Kusec */ + uint16 atim_window; /* units are Kusec */ + uint8 channel; /* Channel no. */ + int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ + struct { + uint count; /* # rates in this set */ + uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ + } rateset; /* supported rates */ + uint8 dtim_period; /* DTIM period */ + int8 phy_noise; /* noise right after tx (in dBm) */ + uint16 capability; /* Capability information */ + struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ + uint16 prb_len; /* probe response frame length (ioctl na) */ + struct { + uint8 supported; /* wpa supported */ + uint8 multicast; /* multicast cipher */ + uint8 ucount; /* count of unicast ciphers */ + uint8 unicast[4]; /* unicast ciphers */ + uint8 acount; /* count of auth modes */ + uint8 auth[4]; /* Authentication modes */ + } wpa; +} wl_bss_info106_t; + +typedef struct wl_bss_info { + uint32 version; /* version field */ + uint32 length; /* byte length of data in this record, starting at version and including IEs */ + struct ether_addr BSSID; + uint16 beacon_period; /* units are Kusec */ + uint16 capability; /* Capability information */ + uint8 SSID_len; + uint8 SSID[32]; + struct { + uint count; /* # rates in this set */ + uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ + } rateset; /* supported rates */ + uint8 channel; /* Channel no. */ + uint16 atim_window; /* units are Kusec */ + uint8 dtim_period; /* DTIM period */ + int16 RSSI; /* receive signal strength (in dBm) */ + int8 phy_noise; /* noise (in dBm) */ + uint32 ie_length; /* byte length of Information Elements */ + /* variable length Information Elements */ +} wl_bss_info_t; + +typedef struct wlc_ssid { + uint32 SSID_len; + uchar SSID[32]; +} wlc_ssid_t; + +typedef struct wl_scan_params { + wlc_ssid_t ssid; /* default is {0, ""} */ + struct ether_addr bssid;/* default is bcast */ + int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ + int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */ + int32 nprobes; /* -1 use default, number of probes per channel */ + int32 active_time; /* -1 use default, dwell time per channel for active scanning */ + int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */ + int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */ + int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */ + uint16 channel_list[1]; /* list of chanspecs */ +} wl_scan_params_t; +/* size of wl_scan_params not including variable length array */ +#define WL_SCAN_PARAMS_FIXED_SIZE 64 + +typedef struct wl_scan_results { + uint32 buflen; + uint32 version; + uint32 count; + wl_bss_info_t bss_info[1]; +} wl_scan_results_t; +/* size of wl_scan_results not including variable length array */ +#define WL_SCAN_RESULTS_FIXED_SIZE 12 + +/* uint32 list */ +typedef struct wl_uint32_list { + /* in - # of elements, out - # of entries */ + uint32 count; + /* variable length uint32 list */ + uint32 element[1]; +} wl_uint32_list_t; + +#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ + +typedef struct wl_channels_in_country { + uint32 buflen; + uint32 band; + char country_abbrev[WLC_CNTRY_BUF_SZ]; + uint32 count; + uint32 channel[1]; +} wl_channels_in_country_t; + +typedef struct wl_country_list { + uint32 buflen; + uint32 band_set; + uint32 band; + uint32 count; + char country_abbrev[1]; +} wl_country_list_t; + +#define WL_RM_TYPE_BASIC 1 +#define WL_RM_TYPE_CCA 2 +#define WL_RM_TYPE_RPI 3 + +#define WL_RM_FLAG_PARALLEL (1<<0) + +#define WL_RM_FLAG_LATE (1<<1) +#define WL_RM_FLAG_INCAPABLE (1<<2) +#define WL_RM_FLAG_REFUSED (1<<3) + +typedef struct wl_rm_req_elt { + int8 type; + int8 flags; + uint16 chanspec; + uint32 token; /* token for this measurement */ + uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ + uint32 tsf_l; /* TSF low 32-bits */ + uint32 dur; /* TUs */ +} wl_rm_req_elt_t; + +typedef struct wl_rm_req { + uint32 token; /* overall measurement set token */ + uint32 count; /* number of measurement reqests */ + wl_rm_req_elt_t req[1]; /* variable length block of requests */ +} wl_rm_req_t; +#define WL_RM_REQ_FIXED_LEN 8 + +typedef struct wl_rm_rep_elt { + int8 type; + int8 flags; + uint16 chanspec; + uint32 token; /* token for this measurement */ + uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ + uint32 tsf_l; /* TSF low 32-bits */ + uint32 dur; /* TUs */ + uint32 len; /* byte length of data block */ + uint8 data[1]; /* variable length data block */ +} wl_rm_rep_elt_t; +#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ + +#define WL_RPI_REP_BIN_NUM 8 +typedef struct wl_rm_rpi_rep { + uint8 rpi[WL_RPI_REP_BIN_NUM]; + int8 rpi_max[WL_RPI_REP_BIN_NUM]; +} wl_rm_rpi_rep_t; + +typedef struct wl_rm_rep { + uint32 token; /* overall measurement set token */ + uint32 len; /* length of measurement report block */ + wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ +} wl_rm_rep_t; +#define WL_RM_REP_FIXED_LEN 8 + + +#define WLC_MAX_KEY_SIZE 32 /* max size of any key */ +#define WLC_MAX_IV_SIZE 16 /* max size of any IV */ +#define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ +#define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */ +#define WLC_MAX_KEYS 54 /* Max # of WEP keys */ +#define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */ +#define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ +#define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */ +#define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ +#define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */ +#define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ +#define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ +#define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */ +#define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ +#define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ +#define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ +#define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ +#define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */ +#define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */ +#define WLC_AES_KEY_SIZE 16 /* size of AES key */ + + +typedef enum sup_auth_status { + WLC_SUP_DISCONNECTED = 0, + WLC_SUP_CONNECTING, + WLC_SUP_IDREQUIRED, + WLC_SUP_AUTHENTICATING, + WLC_SUP_AUTHENTICATED, + WLC_SUP_KEYXCHANGE, + WLC_SUP_KEYED +} sup_auth_status_t; + +/* Enumerate crypto algorithms */ +#define CRYPTO_ALGO_OFF 0 +#define CRYPTO_ALGO_WEP1 1 +#define CRYPTO_ALGO_TKIP 2 +#define CRYPTO_ALGO_WEP128 3 +#define CRYPTO_ALGO_AES_CCM 4 +#define CRYPTO_ALGO_AES_OCB_MSDU 5 +#define CRYPTO_ALGO_AES_OCB_MPDU 6 +#define CRYPTO_ALGO_NALG 7 + +#define WSEC_GEN_MIC_ERROR 0x0001 +#define WSEC_GEN_REPLAY 0x0002 + +#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ +#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ +#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ +#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ + + +typedef struct wlc_tkip_info { + uint16 phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */ + uint8 phase2[WLC_TKIP_P2_KEY_SIZE]; /* tkhash phase2 result */ + uint32 micl; + uint32 micr; +} tkip_info_t; + +typedef struct _wsec_iv { + uint32 hi; /* upper 32 bits of IV */ + uint16 lo; /* lower 16 bits of IV */ +} wsec_iv_t; + +typedef struct wsec_key { + uint32 index; /* key index */ + uint32 len; /* key length */ + uint8 data[WLC_MAX_KEY_SIZE]; /* key data */ + tkip_info_t tkip_tx; /* tkip transmit state */ + tkip_info_t tkip_rx; /* tkip receive state */ + uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + uint32 flags; /* misc flags */ + uint32 algo_hw; /* cache for hw register*/ + uint32 aes_mode; /* cache for hw register*/ + int iv_len; /* IV length */ + int iv_initialized; /* has IV been initialized already? */ + int icv_len; /* ICV length */ + wsec_iv_t rxiv; /* Rx IV */ + wsec_iv_t txiv; /* Tx IV */ + struct ether_addr ea; /* per station */ +} wsec_key_t; + + + +typedef struct wl_wsec_key { + uint32 index; /* key index */ + uint32 len; /* key length */ + uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ + uint32 pad_1[18]; + uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + uint32 flags; /* misc flags */ + uint32 pad_2[2]; + int pad_3; + int iv_initialized; /* has IV been initialized already? */ + int pad_4; + /* Rx IV */ + struct { + uint32 hi; /* upper 32 bits of IV */ + uint16 lo; /* lower 16 bits of IV */ + } rxiv; + uint32 pad_5[2]; + struct ether_addr ea; /* per station */ +} wl_wsec_key_t; + +/* For use with wlc_wep_key.flags */ +#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ +#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */ + +#define WSEC_MIN_PSK_LEN 8 +#define WSEC_MAX_PSK_LEN 64 + +/* Flag for key material needing passhash'ing */ +#define WSEC_PASSPHRASE (1<<0) + +/* recepticle for WLC_SET_WSEC_PMK parameter */ +typedef struct { + ushort key_len; /* octets in key material */ + ushort flags; /* key handling qualification */ + uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ +} wsec_pmk_t; + +/* wireless security bitvec */ +#define WEP_ENABLED 1 +#define TKIP_ENABLED 2 +#define AES_ENABLED 4 +#define WSEC_SWFLAG 8 + +#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) +#define WSEC_HW(wsec) (!WSEC_SW(wsec)) +#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) +#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) +#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) +#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) + + +/* wireless authentication bit vector */ +#define WPA_ENABLED 1 +#define PSK_ENABLED 2 + +#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED) +#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED) +#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED)) + +/* group/mcast cipher */ +#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \ + ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \ + WPA_CIPHER_NONE) + + +typedef struct wl_led_info { + uint32 index; /* led index */ + uint32 behavior; + bool activehi; +} wl_led_info_t; + +/* + * definitions for driver messages passed from WL to NAS. + */ +/* Use this to recognize wpa and 802.1x driver messages. */ +static const uint8 wl_wpa_snap_template[] = + { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; + +#define WL_WPA_MSG_IFNAME_MAX 16 + +/* WPA driver message */ +typedef struct wl_wpa_header { + struct ether_header eth; + struct dot11_llc_snap_header snap; + uint8 version; + uint8 type; + /* version 2 additions */ + char ifname[WL_WPA_MSG_IFNAME_MAX]; + /* version specific data */ + /* uint8 data[1]; */ +} wl_wpa_header_t PACKED; + +/* + * definitions for 802.2 messages passed from WL to NAS. + */ +/* This seems not to be defined outside the kernel on linux. */ +#ifndef ETH_P_802_2 +#define ETH_P_802_2 4 +#endif + +#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) + +/* WPA driver message ethertype - private between wlc and nas */ +#define WL_WPA_ETHER_TYPE 0x9999 + +/* WPA driver message current version */ +#define WL_WPA_MSG_VERSION 2 + +/* Type field values for the 802.2 driver messages for WPA. */ +#define WLC_ASSOC_MSG 1 +#define WLC_DISASSOC_MSG 2 +#define WLC_PTK_MIC_MSG 3 +#define WLC_GTK_MIC_MSG 4 + +/* Use this to recognize 802.2 driver messages. */ +static const uint8 wpa_snap_template[] = + { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; + + +/* 802.1x driver message */ +typedef struct wl_eapol_header { + struct ether_header eth; + struct dot11_llc_snap_header snap; + uint8 version; + uint8 reserved; + char ifname[WL_WPA_MSG_IFNAME_MAX]; + /* version specific data */ + /* uint8 802_1x_msg[1]; */ +} wl_eapol_header_t PACKED; + +#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) + +/* 802.1x driver message ethertype - private between wlc and nas */ +#define WL_EAPOL_ETHER_TYPE 0x999A + +/* 802.1x driver message current version */ +#define WL_EAPOL_MSG_VERSION 1 + +/* srom read/write struct passed through ioctl */ +typedef struct { + uint byteoff; /* byte offset */ + uint nbytes; /* number of bytes */ + uint16 buf[1]; +} srom_rw_t; + +/* R_REG and W_REG struct passed through ioctl */ +typedef struct { + uint32 byteoff; /* byte offset of the field in d11regs_t */ + uint32 val; /* read/write value of the field */ + uint32 size; /* sizeof the field */ +} rw_reg_t; + +/* Structure used by GET/SET_ATTEN ioctls */ +typedef struct { + uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ + uint16 bb; /* Baseband attenuation */ + uint16 radio; /* Radio attenuation */ + uint16 txctl1; /* Radio TX_CTL1 value */ +} atten_t; + +/* Used to get specific STA parameters */ +typedef struct { + uint32 val; + struct ether_addr ea; +} scb_val_t; + +/* callback registration data types */ + +typedef struct _mac_event_params { + uint msg; + struct ether_addr *addr; + uint result; + uint status; + uint auth_type; +} mac_event_params_t; + +typedef struct _mic_error_params { + struct ether_addr *ea; + bool group; + bool flush_txq; +} mic_error_params_t; + +typedef enum _wl_callback { + WL_MAC_EVENT_CALLBACK = 0, + WL_LINK_UP_CALLBACK, + WL_LINK_DOWN_CALLBACK, + WL_MIC_ERROR_CALLBACK, + WL_LAST_CALLBACK +} wl_callback_t; + +typedef struct _callback { + void (*fn)(void *, void *); + void *context; +} callback_t; + +typedef struct _scan_callback { + void (*fn)(void *); + void *context; +} scan_callback_t; + +/* used to register an arbitrary callback via the IOCTL interface */ +typedef struct _set_callback { + int index; + callback_t callback; +} set_callback_t; + + + +/* Event data type */ +typedef struct { + uint msg; /* Message (see below) */ + struct ether_addr *addr; /* Station address (if applicable) */ + uint status; /* Status code (see below) */ + uint reason; /* Reason code (if applicable) */ + uint auth_type; /* WLC_E_AUTH */ + bool link; /* WLC_E_LINK */ + bool group; /* WLC_E_MIC_ERROR */ + bool flush_txq; /* WLC_E_MIC_ERROR */ +} wlc_event_t; + +typedef struct { + uint16 ver; /* version of this struct */ + uint16 cap; /* sta's advertized capabilities */ + uint32 flags; /* flags defined below */ + uint32 idle; /* time since data pkt rx'd from sta */ + struct ether_addr ea; /* Station address */ + wl_rateset_t rateset; /* rateset in use */ +} sta_info_t; + +#define WL_STA_INFO_LEN 300 +#define WL_STA_VER 1 + +/* flags fields */ +#define WL_STA_BRCM 0x01 +#define WL_STA_WME 0x02 +#define WL_STA_ABCAP 0x04 +#define WL_STA_AUTHE 0x08 +#define WL_STA_ASSOC 0x10 +#define WL_STA_AUTHO 0x20 + +/* Event messages */ +#define WLC_E_SET_SSID 1 +#define WLC_E_JOIN 2 +#define WLC_E_START 3 +#define WLC_E_AUTH 4 +#define WLC_E_AUTH_IND 5 +#define WLC_E_DEAUTH 6 +#define WLC_E_DEAUTH_IND 7 +#define WLC_E_ASSOC 8 +#define WLC_E_ASSOC_IND 9 +#define WLC_E_REASSOC 10 +#define WLC_E_REASSOC_IND 11 +#define WLC_E_DISASSOC 12 +#define WLC_E_DISASSOC_IND 13 +#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */ +#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */ +#define WLC_E_GOT_BEACONS 16 +#define WLC_E_LINK 17 /* Link indication */ +#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */ +#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */ +#define WLC_E_ROAM 20 +#define WLC_E_LAST 21 + +/* Event status codes */ +#define WLC_E_STATUS_SUCCESS 0 +#define WLC_E_STATUS_FAIL 1 +#define WLC_E_STATUS_TIMEOUT 2 +#define WLC_E_STATUS_NO_NETWORKS 3 +#define WLC_E_STATUS_ABORT 4 + +typedef struct wlc_event_cb { + uint msg; /* Event message or 0 for all */ + void (*fn)(void *, wlc_event_t *); /* Callback function */ + void *context; /* Passed to callback function */ + struct wlc_event_cb *next; /* Next in the chain */ +} wlc_event_cb_t; + +/* + * Country locale determines which channels are available to us. + */ +typedef enum _wlc_locale { + WLC_WW = 0, /* Worldwide */ + WLC_THA, /* Thailand */ + WLC_ISR, /* Israel */ + WLC_JDN, /* Jordan */ + WLC_PRC, /* China */ + WLC_JPN, /* Japan */ + WLC_FCC, /* USA */ + WLC_EUR, /* Europe */ + WLC_USL, /* US Low Band only */ + WLC_JPH, /* Japan High Band only */ + WLC_ALL, /* All the channels in this band */ + WLC_11D, /* Represents locale recieved by 11d beacons */ + WLC_LAST_LOCALE, + WLC_UNDEFINED_LOCALE = 0xf +} wlc_locale_t; + +/* channel encoding */ +typedef struct channel_info { + int hw_channel; + int target_channel; + int scan_channel; +} channel_info_t; + +/* For ioctls that take a list of MAC addresses */ +struct maclist { + uint count; /* number of MAC addresses */ + struct ether_addr ea[1]; /* variable length array of MAC addresses */ +}; + +/* get pkt count struct passed through ioctl */ +typedef struct get_pktcnt { + uint rx_good_pkt; + uint rx_bad_pkt; + uint tx_good_pkt; + uint tx_bad_pkt; +} get_pktcnt_t; + +/* Linux network driver ioctl encoding */ +typedef struct wl_ioctl { + uint cmd; /* common ioctl definition */ + void *buf; /* pointer to user buffer */ + uint len; /* length of user buffer */ + bool set; /* get or set request (optional) */ + uint used; /* bytes read or written (optional) */ + uint needed; /* bytes needed (optional) */ +} wl_ioctl_t; + +/* + * Structure for passing hardware and software + * revision info up from the driver. + */ +typedef struct wlc_rev_info { + uint vendorid; /* PCI vendor id */ + uint deviceid; /* device id of chip */ + uint radiorev; /* radio revision */ + uint chiprev; /* chip revision */ + uint corerev; /* core revision */ + uint boardid; /* board identifier (usu. PCI sub-device id) */ + uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ + uint boardrev; /* board revision */ + uint driverrev; /* driver version */ + uint ucoderev; /* microcode version */ + uint bus; /* bus type */ + uint chipnum; /* chip number */ +} wlc_rev_info_t; + +/* check this magic number */ +#define WLC_IOCTL_MAGIC 0x14e46c77 + +/* bump this number if you change the ioctl interface */ +#define WLC_IOCTL_VERSION 1 + +/* maximum length buffer required */ +#define WLC_IOCTL_MAXLEN 8192 + +/* common ioctl definitions */ +#define WLC_GET_MAGIC 0 +#define WLC_GET_VERSION 1 +#define WLC_UP 2 +#define WLC_DOWN 3 +#define WLC_GET_LOOP 4 +#define WLC_SET_LOOP 5 +#define WLC_DUMP 6 +#define WLC_GET_MSGLEVEL 7 +#define WLC_SET_MSGLEVEL 8 +#define WLC_GET_PROMISC 9 +#define WLC_SET_PROMISC 10 +#define WLC_OBSOLETE 11 +#define WLC_GET_RATE 12 +#define WLC_SET_RATE 13 +#define WLC_GET_INSTANCE 14 +#define WLC_GET_FRAG 15 +#define WLC_SET_FRAG 16 +#define WLC_GET_RTS 17 +#define WLC_SET_RTS 18 +#define WLC_GET_INFRA 19 +#define WLC_SET_INFRA 20 +#define WLC_GET_AUTH 21 +#define WLC_SET_AUTH 22 +#define WLC_GET_BSSID 23 +#define WLC_SET_BSSID 24 +#define WLC_GET_SSID 25 +#define WLC_SET_SSID 26 +#define WLC_RESTART 27 +#define WLC_DUMP_SCB 28 +#define WLC_GET_CHANNEL 29 +#define WLC_SET_CHANNEL 30 +#define WLC_GET_SRL 31 +#define WLC_SET_SRL 32 +#define WLC_GET_LRL 33 +#define WLC_SET_LRL 34 +#define WLC_GET_PLCPHDR 35 +#define WLC_SET_PLCPHDR 36 +#define WLC_GET_RADIO 37 +#define WLC_SET_RADIO 38 +#define WLC_GET_PHYTYPE 39 +#define WLC_DUMP_RATE 40 +#define WLC_SET_RATE_PARAMS 41 +#define WLC_GET_WEP 42 +#define WLC_SET_WEP 43 +#define WLC_GET_KEY 44 +#define WLC_SET_KEY 45 +#define WLC_GET_REGULATORY 46 +#define WLC_SET_REGULATORY 47 +#define WLC_GET_PASSIVE 48 /* added by nbd */ +#define WLC_SET_PASSIVE 49 /* added by nbd */ +#define WLC_SCAN 50 +#define WLC_SCAN_RESULTS 51 +#define WLC_DISASSOC 52 +#define WLC_REASSOC 53 +#define WLC_GET_ROAM_TRIGGER 54 +#define WLC_SET_ROAM_TRIGGER 55 +#define WLC_GET_ROAM_DELTA 56 +#define WLC_SET_ROAM_DELTA 57 +#define WLC_GET_ROAM_SCAN_PERIOD 58 +#define WLC_SET_ROAM_SCAN_PERIOD 59 +#define WLC_EVM 60 +#define WLC_GET_TXANT 61 +#define WLC_SET_TXANT 62 +#define WLC_GET_ANTDIV 63 +#define WLC_SET_ANTDIV 64 +#define WLC_GET_TXPWR 65 +#define WLC_SET_TXPWR 66 +#define WLC_GET_CLOSED 67 +#define WLC_SET_CLOSED 68 +#define WLC_GET_MACLIST 69 +#define WLC_SET_MACLIST 70 +#define WLC_GET_RATESET 71 +#define WLC_SET_RATESET 72 +#define WLC_GET_LOCALE 73 +#define WLC_SET_LOCALE 74 +#define WLC_GET_BCNPRD 75 +#define WLC_SET_BCNPRD 76 +#define WLC_GET_DTIMPRD 77 +#define WLC_SET_DTIMPRD 78 +#define WLC_GET_SROM 79 +#define WLC_SET_SROM 80 +#define WLC_GET_WEP_RESTRICT 81 +#define WLC_SET_WEP_RESTRICT 82 +#define WLC_GET_COUNTRY 83 +#define WLC_SET_COUNTRY 84 +#define WLC_GET_PM 85 +#define WLC_SET_PM 86 +#define WLC_GET_WAKE 87 +#define WLC_SET_WAKE 88 +#define WLC_GET_D11CNTS 89 +#define WLC_GET_FORCELINK 90 /* ndis only */ +#define WLC_SET_FORCELINK 91 /* ndis only */ +#define WLC_FREQ_ACCURACY 92 +#define WLC_CARRIER_SUPPRESS 93 +#define WLC_GET_PHYREG 94 +#define WLC_SET_PHYREG 95 +#define WLC_GET_RADIOREG 96 +#define WLC_SET_RADIOREG 97 +#define WLC_GET_REVINFO 98 +#define WLC_GET_UCANTDIV 99 +#define WLC_SET_UCANTDIV 100 +#define WLC_R_REG 101 +#define WLC_W_REG 102 +#define WLC_DIAG_LOOPBACK 103 +#define WLC_RESET_D11CNTS 104 +#define WLC_GET_MACMODE 105 +#define WLC_SET_MACMODE 106 +#define WLC_GET_MONITOR 107 /* added by nbd */ +#define WLC_SET_MONITOR 108 /* added by nbd */ +#define WLC_GET_GMODE 109 +#define WLC_SET_GMODE 110 +#define WLC_GET_LEGACY_ERP 111 +#define WLC_SET_LEGACY_ERP 112 +#define WLC_GET_RX_ANT 113 +#define WLC_GET_CURR_RATESET 114 /* current rateset */ +#define WLC_GET_SCANSUPPRESS 115 +#define WLC_SET_SCANSUPPRESS 116 +#define WLC_GET_AP 117 +#define WLC_SET_AP 118 +#define WLC_GET_EAP_RESTRICT 119 +#define WLC_SET_EAP_RESTRICT 120 +#define WLC_SCB_AUTHORIZE 121 +#define WLC_SCB_DEAUTHORIZE 122 +#define WLC_GET_WDSLIST 123 +#define WLC_SET_WDSLIST 124 +#define WLC_GET_ATIM 125 +#define WLC_SET_ATIM 126 +#define WLC_GET_RSSI 127 +#define WLC_GET_PHYANTDIV 128 +#define WLC_SET_PHYANTDIV 129 +#define WLC_AP_RX_ONLY 130 +#define WLC_GET_TX_PATH_PWR 131 +#define WLC_SET_TX_PATH_PWR 132 +#define WLC_GET_WSEC 133 +#define WLC_SET_WSEC 134 +#define WLC_GET_PHY_NOISE 135 +#define WLC_GET_BSS_INFO 136 +#define WLC_GET_PKTCNTS 137 +#define WLC_GET_LAZYWDS 138 +#define WLC_SET_LAZYWDS 139 +#define WLC_GET_BANDLIST 140 +#define WLC_GET_BAND 141 +#define WLC_SET_BAND 142 +#define WLC_SCB_DEAUTHENTICATE 143 +#define WLC_GET_SHORTSLOT 144 +#define WLC_GET_SHORTSLOT_OVERRIDE 145 +#define WLC_SET_SHORTSLOT_OVERRIDE 146 +#define WLC_GET_SHORTSLOT_RESTRICT 147 +#define WLC_SET_SHORTSLOT_RESTRICT 148 +#define WLC_GET_GMODE_PROTECTION 149 +#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 +#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 +#define WLC_UPGRADE 152 +#define WLC_GET_MRATE 153 +#define WLC_SET_MRATE 154 +#define WLC_GET_IGNORE_BCNS 155 +#define WLC_SET_IGNORE_BCNS 156 +#define WLC_GET_SCB_TIMEOUT 157 +#define WLC_SET_SCB_TIMEOUT 158 +#define WLC_GET_ASSOCLIST 159 +#define WLC_GET_CLK 160 +#define WLC_SET_CLK 161 +#define WLC_GET_UP 162 +#define WLC_OUT 163 +#define WLC_GET_WPA_AUTH 164 +#define WLC_SET_WPA_AUTH 165 +#define WLC_GET_UCFLAGS 166 +#define WLC_SET_UCFLAGS 167 +#define WLC_GET_PWRIDX 168 +#define WLC_SET_PWRIDX 169 +#define WLC_GET_TSSI 170 +#define WLC_GET_SUP_RATESET_OVERRIDE 171 +#define WLC_SET_SUP_RATESET_OVERRIDE 172 +#define WLC_SET_FAST_TIMER 173 +#define WLC_GET_FAST_TIMER 174 +#define WLC_SET_SLOW_TIMER 175 +#define WLC_GET_SLOW_TIMER 176 +#define WLC_DUMP_PHYREGS 177 +#define WLC_GET_GMODE_PROTECTION_CONTROL 178 +#define WLC_SET_GMODE_PROTECTION_CONTROL 179 +#define WLC_GET_PHYLIST 180 +#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ +#define WLC_DECRYPT_STATUS 182 /* ndis only */ +#define WLC_GET_KEY_SEQ 183 +#define WLC_GET_SCAN_CHANNEL_TIME 184 +#define WLC_SET_SCAN_CHANNEL_TIME 185 +#define WLC_GET_SCAN_UNASSOC_TIME 186 +#define WLC_SET_SCAN_UNASSOC_TIME 187 +#define WLC_GET_SCAN_HOME_TIME 188 +#define WLC_SET_SCAN_HOME_TIME 189 +#define WLC_GET_SCAN_PASSES 190 +#define WLC_SET_SCAN_PASSES 191 +#define WLC_GET_PRB_RESP_TIMEOUT 192 +#define WLC_SET_PRB_RESP_TIMEOUT 193 +#define WLC_GET_ATTEN 194 +#define WLC_SET_ATTEN 195 +#define WLC_GET_SHMEM 196 /* diag */ +#define WLC_SET_SHMEM 197 /* diag */ +#define WLC_GET_GMODE_PROTECTION_CTS 198 +#define WLC_SET_GMODE_PROTECTION_CTS 199 +#define WLC_SET_TKIP_MIC_FLAG 200 +#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 +#define WLC_TKIP_COUNTERMEASURES 202 +#define WLC_GET_PIOMODE 203 +#define WLC_SET_PIOMODE 204 +#define WLC_SET_LED 209 +#define WLC_GET_LED 210 +#define WLC_GET_INTERFERENCE_MODE 211 +#define WLC_SET_INTERFERENCE_MODE 212 +#define WLC_GET_CHANNEL_QA 213 +#define WLC_START_CHANNEL_QA 214 +#define WLC_GET_CHANNEL_SEL 215 +#define WLC_START_CHANNEL_SEL 216 +#define WLC_GET_VALID_CHANNELS 217 +#define WLC_GET_FAKEFRAG 218 +#define WLC_SET_FAKEFRAG 219 +#define WLC_GET_PWROUT_PERCENTAGE 220 +#define WLC_SET_PWROUT_PERCENTAGE 221 +#define WLC_SET_BAD_FRAME_PREEMPT 222 +#define WLC_GET_BAD_FRAME_PREEMPT 223 +#define WLC_SET_LEAP_LIST 224 +#define WLC_GET_LEAP_LIST 225 +#define WLC_GET_CWMIN 226 +#define WLC_SET_CWMIN 227 +#define WLC_GET_CWMAX 228 +#define WLC_SET_CWMAX 229 +#define WLC_GET_WET 230 +#define WLC_SET_WET 231 +#define WLC_GET_KEY_PRIMARY 235 +#define WLC_SET_KEY_PRIMARY 236 +#define WLC_SCAN_WITH_CALLBACK 240 +#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */ +#define WLC_SET_CS_SCAN_TIMER 248 +#define WLC_GET_CS_SCAN_TIMER 249 +#define WLC_CURRENT_PWR 256 +#define WLC_GET_CHANNELS_IN_COUNTRY 260 +#define WLC_GET_COUNTRY_LIST 261 +#define WLC_GET_VAR 262 /* get value of named variable */ +#define WLC_SET_VAR 263 /* set named variable to value */ +#define WLC_NVRAM_GET 264 +#define WLC_NVRAM_SET 265 +#define WLC_SET_WSEC_PMK 268 +#define WLC_GET_AUTH_MODE 269 +#define WLC_SET_AUTH_MODE 270 +#define WLC_LAST 273 /* do not change - use get_var/set_var */ + +/* + * Minor kludge alert: + * Duplicate a few definitions that irelay requires from epiioctl.h here + * so caller doesn't have to include this file and epiioctl.h . + * If this grows any more, it would be time to move these irelay-specific + * definitions out of the epiioctl.h and into a separate driver common file. + */ +#ifndef EPICTRL_COOKIE +#define EPICTRL_COOKIE 0xABADCEDE +#endif + +/* vx wlc ioctl's offset */ +#define CMN_IOCTL_OFF 0x180 + +/* + * custom OID support + * + * 0xFF - implementation specific OID + * 0xE4 - first byte of Broadcom PCI vendor ID + * 0x14 - second byte of Broadcom PCI vendor ID + * 0xXX - the custom OID number + */ + +/* begin 0x1f values beyond the start of the ET driver range. */ +#define WL_OID_BASE 0xFFE41420 + +/* NDIS overrides */ +#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) +#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK) +#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK) +#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH) +#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS) + +#define WL_DECRYPT_STATUS_SUCCESS 1 +#define WL_DECRYPT_STATUS_FAILURE 2 +#define WL_DECRYPT_STATUS_UNKNOWN 3 + +/* allows user-mode app to poll the status of USB image upgrade */ +#define WLC_UPGRADE_SUCCESS 0 +#define WLC_UPGRADE_PENDING 1 + +/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ +#define WL_RADIO_SW_DISABLE (1<<0) +#define WL_RADIO_HW_DISABLE (1<<1) + +/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ +#define WL_TXPWR_OVERRIDE (1<<31) + + +/* Bus types */ +#define WL_SB_BUS 0 /* Silicon Backplane */ +#define WL_PCI_BUS 1 /* PCI target */ +#define WL_PCMCIA_BUS 2 /* PCMCIA target */ + +/* band types */ +#define WLC_BAND_AUTO 0 /* auto-select */ +#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ +#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ + +/* MAC list modes */ +#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ +#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ +#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ + + +/* 54g modes (basic bits may still be overridden) */ +#define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */ + /* Preamble: Long */ + /* Shortslot: Off */ +#define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ + /* Extended Rateset: 6, 9, 12, 48 */ + /* Preamble: Long */ + /* Shortslot: Auto */ +#define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */ + /* Extended Rateset: 6b, 9, 12b, 48 */ + /* Preamble: Short required */ + /* Shortslot: Auto */ +#define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ + /* Extended Rateset: 6, 9, 12, 48 */ + /* Preamble: Long */ + /* Shortslot: On */ +#define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */ + /* Preamble: Short required */ + /* Shortslot: On and required */ +#define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */ + /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */ + /* Preamble: Long */ + /* Shortslot: Auto */ +#define GMODE_MAX 6 + + +/* values for PLCPHdr_override */ +#define WLC_PLCP_AUTO -1 +#define WLC_PLCP_SHORT 0 +#define WLC_PLCP_LONG 1 + +/* values for g_protection_override */ +#define WLC_G_PROTECTION_AUTO -1 +#define WLC_G_PROTECTION_OFF 0 +#define WLC_G_PROTECTION_ON 1 + +/* values for g_protection_control */ +#define WLC_G_PROTECTION_CTL_OFF 0 +#define WLC_G_PROTECTION_CTL_LOCAL 1 +#define WLC_G_PROTECTION_CTL_OVERLAP 2 + +/* Values for PM */ +#define PM_OFF 0 +#define PM_MAX 1 +#define PM_FAST 2 + +/* interference mitigation options */ +#define INTERFERE_NONE 0 /* off */ +#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ +#define WLAN_MANUAL 2 /* ACI: no auto detection */ +#define WLAN_AUTO 3 /* ACI: auto - detact */ + +/* Message levels */ +#define WL_ERROR_VAL 0x0001 +#define WL_TRACE_VAL 0x0002 +#define WL_PRHDRS_VAL 0x0004 +#define WL_PRPKT_VAL 0x0008 +#define WL_INFORM_VAL 0x0010 +#define WL_TMP_VAL 0x0020 +#define WL_OID_VAL 0x0040 +#define WL_RATE_VAL 0x0080 +#define WL_ASSOC_VAL 0x0100 +#define WL_PRUSR_VAL 0x0200 +#define WL_PS_VAL 0x0400 +#define WL_TXPWR_VAL 0x0800 +#define WL_GMODE_VAL 0x1000 +#define WL_DUAL_VAL 0x2000 +#define WL_WSEC_VAL 0x4000 +#define WL_WSEC_DUMP_VAL 0x8000 +#define WL_LOG_VAL 0x10000 +#define WL_NRSSI_VAL 0x20000 +#define WL_LOFT_VAL 0x40000 +#define WL_REGULATORY_VAL 0x80000 +#define WL_ACI_VAL 0x100000 + + +/* 802.11h enforcement levels */ +#define SPECT_MNGMT_OFF 0 /* 11h disabled */ +#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */ + /* when 11h is enabled */ +#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */ + + + +/* max # of leds supported by GPIO (gpio pin# == led index#) */ +#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ + +/* led per-pin behaviors */ +#define WL_LED_OFF 0 /* always off */ +#define WL_LED_ON 1 /* always on */ +#define WL_LED_ACTIVITY 2 /* activity */ +#define WL_LED_RADIO 3 /* radio enabled */ +#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ +#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ +#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ +#define WL_LED_WI1 7 +#define WL_LED_WI2 8 +#define WL_LED_WI3 9 +#define WL_LED_ASSOC 10 /* associated state indicator */ +#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ +#define WL_LED_NUMBEHAVIOR 12 + +/* led behavior numeric value format */ +#define WL_LED_BEH_MASK 0x7f /* behavior mask */ +#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ + + +/* maximum channels */ +#define WL_NUMCHANNELS 64 /* max # of channels in the band */ + +/* rate check */ +#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \ + ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \ + ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \ + ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108) + +/* WDS link local endpoint WPA role */ +#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ +#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ +#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ + +/* afterburner_override */ +#define ABO_AUTO -1 /* auto - no override */ +#define ABO_OFF 0 /* force afterburner off */ +#define ABO_ON 1 /* force afterburner on */ + +#define GMODE_AFTERBURNER 6 + +#undef PACKED + +#endif /* _wlioctl_h_ */ diff --git a/openwrt/target/linux/package/openwrt/include/wlutils.h b/openwrt/target/linux/package/openwrt/include/wlutils.h new file mode 100644 index 000000000..07e2536ca --- /dev/null +++ b/openwrt/target/linux/package/openwrt/include/wlutils.h @@ -0,0 +1,59 @@ +/* + * Broadcom wireless network adapter utility functions + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _wlutils_h_ +#define _wlutils_h_ + +#include <typedefs.h> +#include <wlioctl.h> + +/* + * Pass a wlioctl request to the specified interface. + * @param name interface name + * @param cmd WLC_GET_MAGIC <= cmd < WLC_LAST + * @param buf buffer for passing in and/or receiving data + * @param len length of buf + * @return >= 0 if successful or < 0 otherwise + */ +extern int wl_ioctl(char *name, int cmd, void *buf, int len); + +/* + * Get the MAC (hardware) address of the specified interface. + * @param name interface name + * @param hwaddr 6-byte buffer for receiving address + * @return >= 0 if successful or < 0 otherwise + */ +extern int wl_hwaddr(char *name, unsigned char *hwaddr); + +/* + * Probe the specified interface. + * @param name interface name + * @return >= 0 if a Broadcom wireless device or < 0 otherwise + */ +extern int wl_probe(char *name); + +/* + * Set/Get named variable. + * @param name interface name + * @param var variable name + * @param val variable value/buffer + * @param len variable value/buffer length + * @return success == 0, failure != 0 + */ +extern int wl_set_val(char *name, char *var, void *val, int len); +extern int wl_get_val(char *name, char *var, void *val, int len); +extern int wl_set_int(char *name, char *var, int val); +extern int wl_get_int(char *name, char *var, int *val); + +#endif /* _wlutils_h_ */ diff --git a/openwrt/target/linux/package/openwrt/ipkg/openwrt-utils.control b/openwrt/target/linux/package/openwrt/ipkg/openwrt-utils.control new file mode 100644 index 000000000..37ef63276 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/ipkg/openwrt-utils.control @@ -0,0 +1,9 @@ +Package: openwrt-utils +Priority: optional +Section: sys +Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> +Source: buildroot internal +Description: Basic OpenWrt utilities + This package contains: + mtd: Tool for modifying the flash chip + jffs2root: Expands the jffs2 root partition diff --git a/openwrt/target/linux/package/openwrt/jffs2root.c b/openwrt/target/linux/package/openwrt/jffs2root.c new file mode 100644 index 000000000..36b928ff4 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/jffs2root.c @@ -0,0 +1,123 @@ +/* + * jffs2root.c + * + * Copyright (C) 2005 Mike Baker + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * $Id$ + * + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stddef.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <string.h> + +#include <sys/ioctl.h> +#include <linux/mtd/mtd.h> + +#define FILENAME "/dev/mtdblock/1" + +struct trx_header { + unsigned magic; /* "HDR0" */ + unsigned len; /* Length of file including header */ + unsigned crc32; /* 32-bit CRC from flag_version to end of file */ + unsigned flag_version; /* 0:15 flags, 16:31 version */ + unsigned offsets[3]; /* Offsets of partitions from start of header */ +}; + +unsigned long *crc32; + +void init_crc32() +{ + unsigned long crc; + unsigned long poly = 0xEDB88320L; + int n, bit; + if ((crc32 = (unsigned long *) malloc(256 * sizeof(unsigned long))) == (void *)-1) { + perror("malloc"); + exit(1); + } + for (n = 0; n < 256; n++) { + crc = (unsigned long) n; + for (bit = 0; bit < 8; bit++) + crc = (crc & 1) ? (poly ^ (crc >> 1)) : (crc >> 1); + crc32[n] = crc; + } +} + +unsigned int crc32buf(char *buf, size_t len) +{ + unsigned int crc = 0xFFFFFFFF; + for (; len; len--, buf++) + crc = crc32[(crc ^ *buf) & 0xff] ^ (crc >> 8); + return crc; +} + +int main(int argc, char **argv) +{ + int fd; + struct mtd_info_user mtdInfo; + unsigned long len; + struct trx_header *ptr; + + if (((fd = open(FILENAME, O_RDWR)) < 0) + || ((len = lseek(fd, 0, SEEK_END)) < 0) + || ((ptr = (struct trx_header *) mmap(0, len, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1)) + || (ptr->magic != 0x30524448)) { + printf("Error reading trx info\n"); + exit(-1); + } + close (fd); + + if (((fd = open("/dev/mtd/1", O_RDWR)) < 0) + || (ioctl(fd, MEMGETINFO, &mtdInfo))) { + fprintf(stderr, "Could not get MTD device info from %s\n", FILENAME); + close(fd); + exit(1); + } + close(fd); + + if (argc > 1 && !strcmp(argv[1],"--move")) { + if (ptr->offsets[2] >= ptr->len) { + printf("Partition already moved outside trx\n"); + } else { + init_crc32(); + ptr->offsets[2] += (mtdInfo.erasesize - 1); + ptr->offsets[2] &= ~(mtdInfo.erasesize - 1); + ptr->len = ptr->offsets[2]; + ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version)); + msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE); + printf("Partition moved; please reboot\n"); + } + } else { + int x; + printf(" erase: 0x%08x\n",mtdInfo.erasesize); + printf("=== trx ===\n"); + printf("mapped: 0x%08x\n", (unsigned)ptr); + printf(" magic: 0x%08x\n", ptr->magic); + printf(" len: 0x%08x\n", ptr->len); + printf(" crc: 0x%08x\n", ptr->crc32); + for (x = 0; x < 3; x++) + printf(" offset[%d]: 0x%08x\n", x, ptr->offsets[x]); + } + + munmap((void *) ptr, len); + return 0; +} diff --git a/openwrt/target/linux/package/wlcompat/Makefile b/openwrt/target/linux/package/wlcompat/Makefile index 419b4d2f5..55f05bf9f 100644 --- a/openwrt/target/linux/package/wlcompat/Makefile +++ b/openwrt/target/linux/package/wlcompat/Makefile @@ -17,7 +17,7 @@ endif WLCOMPAT_FLAGS:=$(TARGET_CFLAGS) -D__KERNEL__ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ -mno-abicalls -fno-pic -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 \ -Wa,-mips32 -Wa,--trap -DMODULE -mlong-calls -fno-common -I. -I linux-2.4 -funsigned-char -nostdinc \ - -iwithprefix include -I$(KERNEL_DIR)/include -I$(KERNEL_DIR)/include/asm/gcc -I$(TOPDIR)/package/openwrt/include -c + -iwithprefix include -I$(KERNEL_DIR)/include -I$(KERNEL_DIR)/include/asm/gcc -I../openwrt/include -c $(PKG_BUILD_DIR)/.prepared: mkdir -p $(PKG_BUILD_DIR) |