diff options
Diffstat (limited to 'openwrt/target/linux/package/diag')
| -rw-r--r-- | openwrt/target/linux/package/diag/Config.in | 7 | ||||
| -rw-r--r-- | openwrt/target/linux/package/diag/Makefile | 31 | ||||
| -rw-r--r-- | openwrt/target/linux/package/diag/diag_led.c | 268 | ||||
| -rw-r--r-- | openwrt/target/linux/package/diag/ipkg/kmod-diag.control | 4 |
4 files changed, 0 insertions, 310 deletions
diff --git a/openwrt/target/linux/package/diag/Config.in b/openwrt/target/linux/package/diag/Config.in deleted file mode 100644 index 70f726c5b..000000000 --- a/openwrt/target/linux/package/diag/Config.in +++ /dev/null @@ -1,7 +0,0 @@ -config BR2_PACKAGE_KMOD_DIAG - prompt "kmod-diag......................... Driver for router LEDs and Buttons" - tristate - depends BR2_LINUX_2_4_BRCM - default y - help - Driver for router LEDs and Buttons diff --git a/openwrt/target/linux/package/diag/Makefile b/openwrt/target/linux/package/diag/Makefile deleted file mode 100644 index 3329ee985..000000000 --- a/openwrt/target/linux/package/diag/Makefile +++ /dev/null @@ -1,31 +0,0 @@ -# Makefile for the diag module -# -# $Id$ - -include $(TOPDIR)/rules.mk - -PKG_NAME := kmod-diag -PKG_RELEASE := 1 -PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) - -include $(TOPDIR)/package/rules.mk - -$(eval $(call PKG_template,KMOD_DIAG,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)))) - -DIAG_FLAGS:=$(TARGET_CFLAGS) -D__KERNEL__ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ - -mno-abicalls -fno-pic -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 \ - -Wa,-mips32 -Wa,--trap -Wstrict-prototypes -Wno-trigraphs -DMODULE -mlong-calls -fno-common -I. -I linux-2.4 -nostdinc \ - -iwithprefix include -I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/asm/gcc -c -I$(LINUX_DIR)/arch/mips/bcm947xx/include -DBCMDRIVER - -$(PKG_BUILD_DIR)/.prepared: - mkdir -p $(PKG_BUILD_DIR) - touch $@ - -$(PKG_BUILD_DIR)/.built: - $(TARGET_CC) $(DIAG_FLAGS) -o $(PKG_BUILD_DIR)/diag.o diag_led.c - touch $@ - -$(IPKG_KMOD_DIAG): - mkdir -p $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION) - $(CP) $(PKG_BUILD_DIR)/diag.o $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)/ - $(IPKG_BUILD) $(IDIR_KMOD_DIAG) $(PACKAGE_DIR) diff --git a/openwrt/target/linux/package/diag/diag_led.c b/openwrt/target/linux/package/diag/diag_led.c deleted file mode 100644 index 6ad7ff102..000000000 --- a/openwrt/target/linux/package/diag/diag_led.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * diag_led.c - replacement diag module - * - * Copyright (C) 2004 Mike Baker, - * Imre Kaloz <kaloz@dune.hu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * $Id$ - */ - -/* - * ChangeLog: - * 2004/03/28 initial release - * 2004/08/26 asus & buffalo support added - * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added - * 2005/04/13 added licensing informations - * 2005/04/18 base reset polarity off initial readings - * 2006/02/07 motorola wa840g/we800g support added - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sysctl.h> -#include <asm/io.h> -#include <typedefs.h> -#include <osl.h> -#include <bcmdevs.h> -#include <sbutils.h> - -extern char * nvram_get(const char *name); -static void *sbh; - -// v2.x - - - - - -#define DIAG_GPIO (1<<1) -#define DMZ_GPIO (1<<7) - -static void set_gpio(uint32 mask, uint32 value) { - sb_gpiocontrol(sbh,mask, 0, GPIO_DRV_PRIORITY); - sb_gpioouten(sbh,mask,mask,GPIO_DRV_PRIORITY); - sb_gpioout(sbh,mask,value,GPIO_DRV_PRIORITY); -} - -static void v2_set_diag(u8 state) { - set_gpio(DIAG_GPIO,state); -} -static void v2_set_dmz(u8 state) { - set_gpio(DMZ_GPIO,state); -} - -// v1.x - - - - - -#define LED_DIAG 0x13 -#define LED_DMZ 0x12 - -static void v1_set_diag(u8 state) { - if (!state) { - *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; - } else { - *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); - } -} -static void v1_set_dmz(u8 state) { - if (!state) { - *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; - } else { - *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); - } -} - -static void wap1_set_diag(u8 state) { - set_gpio(1<<3,state); -} -static void wap1_set_dmz(u8 state) { - set_gpio(1<<4,state); -} - -// - - - - - -static void ignore(u8 ignored) {}; - -// - - - - - -#define BIT_DMZ 0x01 -#define BIT_DIAG 0x04 - -void (*set_diag)(u8 state); -void (*set_dmz)(u8 state); - -static unsigned int diag = 0; - -static void diag_change() -{ - set_diag(0xFF); // off - set_dmz(0xFF); // off - - if(diag & BIT_DIAG) - set_diag(0x00); // on - if(diag & BIT_DMZ) - set_dmz(0x00); // on -} - -static int proc_diag(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp) -{ - int r; - r = proc_dointvec(table, write, filp, buffer, lenp); - if (write && !r) { - diag_change(); - } - return r; -} - -// - - - - - -static unsigned char reset_gpio = 0; -static unsigned char reset_polarity = 0; -static unsigned int reset = 0; - -static int proc_reset(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp) -{ - - if (reset_gpio) { - sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY); - sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY); - reset=!(sb_gpioin(sbh)&reset_gpio); - - if (reset_polarity) reset=!reset; - } else { - reset=0; - } - - return proc_dointvec(table, write, filp, buffer, lenp); -} - -// - - - - - -static struct ctl_table_header *diag_sysctl_header; - -static ctl_table sys_diag[] = { - { - ctl_name: 2000, - procname: "diag", - data: &diag, - maxlen: sizeof(diag), - mode: 0644, - proc_handler: proc_diag - }, - { - ctl_name: 2001, - procname: "reset", - data: &reset, - maxlen: sizeof(reset), - mode: 0444, - proc_handler: proc_reset - }, - { 0 } -}; - -static int __init diag_init() -{ - char *buf; - u32 board_type; - sbh = sb_kattach(); - sb_gpiosetcore(sbh); - - board_type = sb_boardtype(sbh); - printk(KERN_INFO "diag boardtype: %08x\n",board_type); - - set_diag=ignore; - set_dmz=ignore; - - buf=nvram_get("pmon_ver") ?: ""; - if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) { - buf=nvram_get("boardtype")?:""; - if (!strncmp(buf,"bcm94710dev",11)) { - buf=nvram_get("boardnum")?:""; - if (!strcmp(buf,"42")) { - // wrt54g v1.x - set_diag=v1_set_diag; - set_dmz=v1_set_dmz; - reset_gpio=(1<<6); - } - if (simple_strtoul(buf, NULL, 0) == 2) { - // wap54g v1.0 - // do not use strcmp as PMON v5.3.22 has some built-in nvram - // defaults with trailing \r - set_diag=wap1_set_diag; - // no dmz led on wap54g, used green led - // labeled "WLAN Link" instead - set_dmz=wap1_set_dmz; - reset_gpio=(1<<0); - } - if (!strcmp(buf,"asusX")) { - //asus wl-500g - reset_gpio=(1<<6); - } - if (!strcmp(buf,"2")) { - //wa840g v1 / we800g v1 - reset_gpio=(1<<0); - } - } - if (!strcmp(buf,"bcm94710ap")) { - buf=nvram_get("boardnum")?:""; - if (!strcmp(buf,"42")) { - // buffalo - set_dmz=v2_set_dmz; - reset_gpio=(1<<4); - } - if (!strcmp(buf,"44")) { - //dell truemobile - set_dmz=v2_set_dmz; - reset_gpio=(1<<0); - } - } - } else { - buf=nvram_get("boardnum")?:""; - if (!strcmp(buf,"42")) { - //linksys - set_diag=v2_set_diag; - set_dmz=v2_set_dmz; - reset_gpio=(1<<6); - } - if (!strcmp(buf,"44")) { - //motorola - reset_gpio=(1<<5); - } - if (!strcmp(buf,"00")) { - //buffalo - reset_gpio=(1<<7); - } - if (!strcmp(buf,"45")) { - //wl-500g deluxe - reset_gpio=(1<<6); - } - } - - - sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY); - sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY); - reset_polarity=!(sb_gpioin(sbh)&reset_gpio); - - diag_sysctl_header = register_sysctl_table(sys_diag, 0); - diag_change(); - - return 0; -} - -static void __exit diag_exit() -{ - unregister_sysctl_table(diag_sysctl_header); -} - -EXPORT_NO_SYMBOLS; -MODULE_AUTHOR("openwrt.org"); -MODULE_LICENSE("GPL"); - -module_init(diag_init); -module_exit(diag_exit); diff --git a/openwrt/target/linux/package/diag/ipkg/kmod-diag.control b/openwrt/target/linux/package/diag/ipkg/kmod-diag.control deleted file mode 100644 index 9c93926b3..000000000 --- a/openwrt/target/linux/package/diag/ipkg/kmod-diag.control +++ /dev/null @@ -1,4 +0,0 @@ -Package: kmod-diag -Priority: essential -Section: sys -Description: Driver for Router LEDs and Buttons |