diff options
Diffstat (limited to 'openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d')
| -rwxr-xr-x | openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram | 66 | ||||
| -rwxr-xr-x | openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig | 108 |
2 files changed, 0 insertions, 174 deletions
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram deleted file mode 100755 index 4de124735..000000000 --- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S04nvram +++ /dev/null @@ -1,66 +0,0 @@ -#!/bin/sh -# NVRAM setup -# -# This file handles the NVRAM quirks of various hardware. - -# WGT634u -grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit - -alias debug=${DEBUG:-:} - -nvram_default() { - [ -z "$(nvram get $1)" ] && nvram set "$1=$2" -} - -nvram_set() { # for the linksys fixup part - [ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || { - COMMIT=1 - /usr/sbin/nvram set "$1=$2" - } -} - -# work around braindead CFE defaults in linksys routers -boardtype=$(nvram get boardtype) -boardnum=$(nvram get boardnum) -boardflags=$(($(nvram get boardflags))) -adm_switch="$(( ($boardflags & 0x80) >> 7 ))" - -case "$(( $boardtype ))" in - "1800") #0x708 - if [ "$adm_switch" = 0 ]; then - nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" - [ "$COMMIT" = 1 ] && { - nvram_set sdram_config 0x0062 - nvram_set clkfreq 216 - nvram_set sdram_ncdl 0x0 - nvram_set pa0itssit 62 - nvram_set pa0b0 0x15eb - nvram_set pa0b1 0xfa82 - nvram_set pa0b2 0xfe66 - nvram_set pa0maxpwr 0x4e - } - fi - ;; - "1127") #0x467 - nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" - [ "$COMMIT" = 1 ] && { - nvram_set sdram_config 0x0062 - nvram_set sdram_ncdl 0x0 - nvram_set pa0itssit 62 - nvram_set pa0b0 0x168b - nvram_set pa0b1 0xfabf - nvram_set pa0b2 0xfeaf - nvram_set pa0maxpwr 0x4e - } - ;; -esac -[ "$COMMIT" = "1" ] && nvram commit - -# hack for some motorola routers -nvram unset wl0gpio0 - -[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && { - # if default wifi mac, set two higher than the lan mac - nvram set il0macaddr=$(nvram get et0macaddr| - awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}') -} diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig deleted file mode 100755 index 6a626f54a..000000000 --- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig +++ /dev/null @@ -1,108 +0,0 @@ -#!/bin/sh -[ -e /etc/config/network ] && exit 0 - -mkdir -p /etc/config - -( - if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then - # WGT634u - echo boardtype=wgt634u - else - strings /dev/mtdblock/3 - fi -) | awk ' -function p(name) { - if (c[name] != "") print name "=\"" c[name] "\"" -} - -BEGIN { - FS="=" - c["lan_ifname"]="br0" - c["lan_ifnames"]="vlan0 eth1" - c["wan_proto"]="none" - c["wan_ifname"]="vlan1" - c["vlan0ports"]="1 2 3 4 5*" - c["vlan1ports"]="0 5" -} - -($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") { - nvram[$1] = $2 -} - -END { - # v1 hardware - if (nvram["boardtype"] == "bcm94710dev") { - # Linksys WRT54G v1.x - if (nvram["boardnum"] == "42") { - c["vlan0ports"]="" - c["vlan1ports"]="" - c["lan_ifnames"]="vlan2 eth2" - } - - # Asus WL-500g - if (nvram["boardnum"] == "asusX") { - c["lan_ifnames"]="eth0 eth1 eth2" # FIXME - # wan_ifname=eth1 - } - } - if (nvram["boardtype"] == "wgt634u") { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - c["lan_ifnames"] = "vlan0 ath0" - } - if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - } - - # WAP54G - if ((nvram["boardnum"] == "2") || \ - (nvram["boardnum"] == "1024")) { - c["lan_ifnames"]="eth0 eth1" - c["wan_ifname"]="" - } - - print "#### VLAN configuration " - print "vlan0hwname=et0" - print "vlan1hwname=et0" - p("vlan0ports") - p("vlan1ports") - print "" - print "" - - print "#### LAN configuration" - print "lan_proto=\"static\"" - p("lan_ifname") - p("lan_ifnames") - print "lan_ipaddr=\"192.168.1.1\"" - print "lan_netmask=\"255.255.255.0\"" - print "# lan_dns=\"192.168.1.1\"" - print "# lan_gateway=\"192.168.1.1\"" - - print "" - print "" - - print "#### WAN configuration" - print "# wan_proto: WAN protocol, available protocols:" - print "# none: disable" - print "# dhcp: DHCP" - print "# static: Static IP" - print "# pppoe: PPP over Ethernet" - print "# pptp: Point-to-Point tunneling Protocol" - print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\"" - print "" - print "wan_proto=dhcp" - p("wan_ifname") - print "wan_device=\"" c["wan_ifname"] "\"" - print "# wan_ipaddr=\"192.168.0.2\"" - print "# wan_netmask=\"255.255.255.0\"" - print "# wan_gateway=\"192.168.0.1\"" - print "# wan_dns=\"192.168.0.1\"" - print "" - print "## PPP over Ethernet and PPTP" - print "# wan_ifname=\"ppp0\"" - print "# ppp_username=\"my_username\"" - print "# ppp_passwd=\"my_password\"" - print "# pptp_server_ip=\"192.168.0.1\"" -} -' > /etc/config/network |