diff options
Diffstat (limited to 'openwrt/package/linux/kernel-source/include/linuxver.h')
-rw-r--r-- | openwrt/package/linux/kernel-source/include/linuxver.h | 392 |
1 files changed, 0 insertions, 392 deletions
diff --git a/openwrt/package/linux/kernel-source/include/linuxver.h b/openwrt/package/linux/kernel-source/include/linuxver.h deleted file mode 100644 index ed8909784..000000000 --- a/openwrt/package/linux/kernel-source/include/linuxver.h +++ /dev/null @@ -1,392 +0,0 @@ -/* - * Linux-specific abstractions to gain some independence from linux kernel versions. - * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#ifndef _linuxver_h_ -#define _linuxver_h_ - -#include <linux/config.h> -#include <linux/version.h> - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) -/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ -#ifdef __UNDEF_NO_VERSION__ -#undef __NO_VERSION__ -#else -#define __NO_VERSION__ -#endif -#endif - -#if defined(MODULE) && defined(MODVERSIONS) -#include <linux/modversions.h> -#endif - -/* linux/malloc.h is deprecated, use linux/slab.h instead. */ -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) -#include <linux/malloc.h> -#else -#include <linux/slab.h> -#endif - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/netdevice.h> -#include <asm/io.h> - -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) -#include <linux/workqueue.h> -#else -#include <linux/tqueue.h> -#define work_struct tq_struct -#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) -#define schedule_work(_work) schedule_task((_work)) -#define flush_scheduled_work() flush_scheduled_tasks() -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) -/* Some distributions have their own 2.6.x compatibility layers */ -#ifndef IRQ_NONE -typedef void irqreturn_t; -#define IRQ_NONE -#define IRQ_HANDLED -#define IRQ_RETVAL(x) -#endif -#endif - -#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) - -#include <pcmcia/version.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/cisreg.h> -#include <pcmcia/ds.h> - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69)) -/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which - * does this, but it's not in 2.4 so we do our own for now. */ -static inline void -cs_error(client_handle_t handle, int func, int ret) -{ - error_info_t err = { func, ret }; - CardServices(ReportError, handle, &err); -} -#endif - -#endif /* CONFIG_PCMCIA */ - -#ifndef __exit -#define __exit -#endif -#ifndef __devexit -#define __devexit -#endif -#ifndef __devinit -#define __devinit __init -#endif -#ifndef __devinitdata -#define __devinitdata -#endif -#ifndef __devexit_p -#define __devexit_p(x) x -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) - -#define pci_get_drvdata(dev) (dev)->sysdata -#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) - -/* - * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration - */ - -struct pci_device_id { - unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ - unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ - unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ - unsigned long driver_data; /* Data private to the driver */ -}; - -struct pci_driver { - struct list_head node; - char *name; - const struct pci_device_id *id_table; /* NULL if wants all devices */ - int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ - void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ - void (*suspend)(struct pci_dev *dev); /* Device suspended */ - void (*resume)(struct pci_dev *dev); /* Device woken up */ -}; - -#define MODULE_DEVICE_TABLE(type, name) -#define PCI_ANY_ID (~0) - -/* compatpci.c */ -#define pci_module_init pci_register_driver -extern int pci_register_driver(struct pci_driver *drv); -extern void pci_unregister_driver(struct pci_driver *drv); - -#endif /* PCI registration */ - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) -#ifdef MODULE -#define module_init(x) int init_module(void) { return x(); } -#define module_exit(x) void cleanup_module(void) { x(); } -#else -#define module_init(x) __initcall(x); -#define module_exit(x) __exitcall(x); -#endif -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) -#define list_for_each(pos, head) \ - for (pos = (head)->next; pos != (head); pos = pos->next) -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) -#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) -#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) -#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) -#define pci_enable_device(dev) do { } while (0) -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) -#define net_device device -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) - -/* - * DMA mapping - * - * See linux/Documentation/DMA-mapping.txt - */ - -#ifndef PCI_DMA_TODEVICE -#define PCI_DMA_TODEVICE 1 -#define PCI_DMA_FROMDEVICE 2 -#endif - -typedef u32 dma_addr_t; - -/* Pure 2^n version of get_order */ -static inline int get_order(unsigned long size) -{ - int order; - - size = (size-1) >> (PAGE_SHIFT-1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - -static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, - dma_addr_t *dma_handle) -{ - void *ret; - int gfp = GFP_ATOMIC | GFP_DMA; - - ret = (void *)__get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_bus(ret); - } - return ret; -} -static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - free_pages((unsigned long)vaddr, get_order(size)); -} -#ifdef ILSIM -extern uint pci_map_single(void *dev, void *va, uint size, int direction); -extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); -#else -#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) -#define pci_unmap_single(cookie, address, size, dir) -#endif - -#endif /* DMA mapping */ - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) - -#define dev_kfree_skb_any(a) dev_kfree_skb(a) -#define netif_down(dev) do { (dev)->start = 0; } while(0) - -/* pcmcia-cs provides its own netdevice compatibility layer */ -#ifndef _COMPAT_NETDEVICE_H - -/* - * SoftNet - * - * For pre-softnet kernels we need to tell the upper layer not to - * re-enter start_xmit() while we are in there. However softnet - * guarantees not to enter while we are in there so there is no need - * to do the netif_stop_queue() dance unless the transmit queue really - * gets stuck. This should also improve performance according to tests - * done by Aman Singla. - */ - -#define dev_kfree_skb_irq(a) dev_kfree_skb(a) -#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) -#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) - -static inline void netif_start_queue(struct net_device *dev) -{ - dev->tbusy = 0; - dev->interrupt = 0; - dev->start = 1; -} - -#define netif_queue_stopped(dev) (dev)->tbusy -#define netif_running(dev) (dev)->start - -#endif /* _COMPAT_NETDEVICE_H */ - -#define netif_device_attach(dev) netif_start_queue(dev) -#define netif_device_detach(dev) netif_stop_queue(dev) - -/* 2.4.x renamed bottom halves to tasklets */ -#define tasklet_struct tq_struct -static inline void tasklet_schedule(struct tasklet_struct *tasklet) -{ - queue_task(tasklet, &tq_immediate); - mark_bh(IMMEDIATE_BH); -} - -static inline void tasklet_init(struct tasklet_struct *tasklet, - void (*func)(unsigned long), - unsigned long data) -{ - tasklet->next = NULL; - tasklet->sync = 0; - tasklet->routine = (void (*)(void *))func; - tasklet->data = (void *)data; -} -#define tasklet_kill(tasklet) {do{} while(0);} - -/* 2.4.x introduced del_timer_sync() */ -#define del_timer_sync(timer) del_timer(timer) - -#else - -#define netif_down(dev) - -#endif /* SoftNet */ - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) - -/* - * Emit code to initialise a tq_struct's routine and data pointers - */ -#define PREPARE_TQUEUE(_tq, _routine, _data) \ - do { \ - (_tq)->routine = _routine; \ - (_tq)->data = _data; \ - } while (0) - -/* - * Emit code to initialise all of a tq_struct - */ -#define INIT_TQUEUE(_tq, _routine, _data) \ - do { \ - INIT_LIST_HEAD(&(_tq)->list); \ - (_tq)->sync = 0; \ - PREPARE_TQUEUE((_tq), (_routine), (_data)); \ - } while (0) - -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) - -/* Power management related routines */ - -static inline int -pci_save_state(struct pci_dev *dev, u32 *buffer) -{ - int i; - if (buffer) { - for (i = 0; i < 16; i++) - pci_read_config_dword(dev, i * 4,&buffer[i]); - } - return 0; -} - -static inline int -pci_restore_state(struct pci_dev *dev, u32 *buffer) -{ - int i; - - if (buffer) { - for (i = 0; i < 16; i++) - pci_write_config_dword(dev,i * 4, buffer[i]); - } - /* - * otherwise, write the context information we know from bootup. - * This works around a problem where warm-booting from Windows - * combined with a D3(hot)->D0 transition causes PCI config - * header data to be forgotten. - */ - else { - for (i = 0; i < 6; i ++) - pci_write_config_dword(dev, - PCI_BASE_ADDRESS_0 + (i * 4), - pci_resource_start(dev, i)); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - return 0; -} - -#endif /* PCI power management */ - -/* Old cp0 access macros deprecated in 2.4.19 */ -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) -#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) -#endif - -/* Module refcount handled internally in 2.6.x */ -#ifndef SET_MODULE_OWNER -#define SET_MODULE_OWNER(dev) do {} while (0) -#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT -#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT -#else -#define OLD_MOD_INC_USE_COUNT do {} while (0) -#define OLD_MOD_DEC_USE_COUNT do {} while (0) -#endif - -#ifndef SET_NETDEV_DEV -#define SET_NETDEV_DEV(net, pdev) do {} while (0) -#endif - -#ifndef HAVE_FREE_NETDEV -#define free_netdev(dev) kfree(dev) -#endif - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) -/* struct packet_type redefined in 2.6.x */ -#define af_packet_priv data -#endif - -#endif /* _linuxver_h_ */ |