diff options
Diffstat (limited to 'openwrt/package/linux/kernel-source/include/bcmenet47xx.h')
| -rw-r--r-- | openwrt/package/linux/kernel-source/include/bcmenet47xx.h | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/openwrt/package/linux/kernel-source/include/bcmenet47xx.h b/openwrt/package/linux/kernel-source/include/bcmenet47xx.h deleted file mode 100644 index 22d7ee26d..000000000 --- a/openwrt/package/linux/kernel-source/include/bcmenet47xx.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Hardware-specific definitions for - * Broadcom BCM47XX 10/100 Mbps Ethernet cores. - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * $Id$ - */ - -#ifndef _bcmenet_47xx_h_ -#define _bcmenet_47xx_h_ - -#include <bcmdevs.h> -#include <hnddma.h> - -#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */ -#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */ -#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */ -#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */ - -/* power management event wakeup pattern constants */ -#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */ -#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */ -#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */ -#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */ -#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */ - -/* cpp contortions to concatenate w/arg prescan */ -#ifndef PAD -#define _PADLINE(line) pad ## line -#define _XSTR(line) _PADLINE(line) -#define PAD _XSTR(__LINE__) -#endif /* PAD */ - -/* sometimes you just need the enet mib definitions */ -#include <bcmenetmib.h> - -/* - * Host Interface Registers - */ -typedef volatile struct _bcmenettregs { - /* Device and Power Control */ - uint32 devcontrol; - uint32 PAD[2]; - uint32 biststatus; - uint32 wakeuplength; - uint32 PAD[3]; - - /* Interrupt Control */ - uint32 intstatus; - uint32 intmask; - uint32 gptimer; - uint32 PAD[23]; - - /* Ethernet MAC Address Filtering Control */ - uint32 PAD[2]; - uint32 enetftaddr; - uint32 enetftdata; - uint32 PAD[2]; - - /* Ethernet MAC Control */ - uint32 emactxmaxburstlen; - uint32 emacrxmaxburstlen; - uint32 emaccontrol; - uint32 emacflowcontrol; - - uint32 PAD[20]; - - /* DMA Lazy Interrupt Control */ - uint32 intrecvlazy; - uint32 PAD[63]; - - /* DMA engine */ - dmaregs_t dmaregs; - dmafifo_t dmafifo; - uint32 PAD[116]; - - /* EMAC Registers */ - uint32 rxconfig; - uint32 rxmaxlength; - uint32 txmaxlength; - uint32 PAD; - uint32 mdiocontrol; - uint32 mdiodata; - uint32 emacintmask; - uint32 emacintstatus; - uint32 camdatalo; - uint32 camdatahi; - uint32 camcontrol; - uint32 enetcontrol; - uint32 txcontrol; - uint32 txwatermark; - uint32 mibcontrol; - uint32 PAD[49]; - - /* EMAC MIB counters */ - bcmenetmib_t mib; - - uint32 PAD[585]; - - /* Sonics SiliconBackplane config registers */ - sbconfig_t sbconfig; -} bcmenetregs_t; - -/* device control */ -#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */ -#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */ -#define DC_ER ((uint32)1 << 15) /* ephy reset */ -#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */ -#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */ -#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */ -#define DC_PA_SHIFT 18 - -/* wakeup length */ -#define WL_P0_MASK 0x7f /* pattern 0 */ -#define WL_D0 ((uint32)1 << 7) -#define WL_P1_MASK 0x7f00 /* pattern 1 */ -#define WL_P1_SHIFT 8 -#define WL_D1 ((uint32)1 << 15) -#define WL_P2_MASK 0x7f0000 /* pattern 2 */ -#define WL_P2_SHIFT 16 -#define WL_D2 ((uint32)1 << 23) -#define WL_P3_MASK 0x7f000000 /* pattern 3 */ -#define WL_P3_SHIFT 24 -#define WL_D3 ((uint32)1 << 31) - -/* intstatus and intmask */ -#define I_PME ((uint32)1 << 6) /* power management event */ -#define I_TO ((uint32)1 << 7) /* general purpose timeout */ -#define I_PC ((uint32)1 << 10) /* descriptor error */ -#define I_PD ((uint32)1 << 11) /* data error */ -#define I_DE ((uint32)1 << 12) /* descriptor protocol error */ -#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */ -#define I_RO ((uint32)1 << 14) /* receive fifo overflow */ -#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */ -#define I_RI ((uint32)1 << 16) /* receive interrupt */ -#define I_XI ((uint32)1 << 24) /* transmit interrupt */ -#define I_EM ((uint32)1 << 26) /* emac interrupt */ -#define I_MW ((uint32)1 << 27) /* mii write */ -#define I_MR ((uint32)1 << 28) /* mii read */ - -/* emaccontrol */ -#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */ -#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */ -#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */ -#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */ -#define EMC_LC_SHIFT 5 - -/* emacflowcontrol */ -#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */ -#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */ - -/* interrupt receive lazy */ -#define IRL_TO_MASK 0x00ffffff /* timeout */ -#define IRL_FC_MASK 0xff000000 /* frame count */ -#define IRL_FC_SHIFT 24 /* frame count */ - -/* emac receive config */ -#define ERC_DB ((uint32)1 << 0) /* disable broadcast */ -#define ERC_AM ((uint32)1 << 1) /* accept all multicast */ -#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */ -#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */ -#define ERC_LE ((uint32)1 << 4) /* loopback enable */ -#define ERC_FE ((uint32)1 << 5) /* enable flow control */ -#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */ -#define ERC_RF ((uint32)1 << 7) /* reject filter */ - -/* emac mdio control */ -#define MC_MF_MASK 0x7f /* mdc frequency */ -#define MC_PE ((uint32)1 << 7) /* mii preamble enable */ - -/* emac mdio data */ -#define MD_DATA_MASK 0xffff /* r/w data */ -#define MD_TA_MASK 0x30000 /* turnaround value */ -#define MD_TA_SHIFT 16 -#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */ -#define MD_RA_MASK 0x7c0000 /* register address */ -#define MD_RA_SHIFT 18 -#define MD_PMD_MASK 0xf800000 /* physical media device */ -#define MD_PMD_SHIFT 23 -#define MD_OP_MASK 0x30000000 /* opcode */ -#define MD_OP_SHIFT 28 -#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */ -#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */ -#define MD_SB_MASK 0xc0000000 /* start bits */ -#define MD_SB_SHIFT 30 -#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */ - -/* emac intstatus and intmask */ -#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */ -#define EI_MIB ((uint32)1 << 1) /* mib interrupt */ -#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */ - -/* emac cam data high */ -#define CD_V ((uint32)1 << 16) /* valid bit */ - -/* emac cam control */ -#define CC_CE ((uint32)1 << 0) /* cam enable */ -#define CC_MS ((uint32)1 << 1) /* mask select */ -#define CC_RD ((uint32)1 << 2) /* read */ -#define CC_WR ((uint32)1 << 3) /* write */ -#define CC_INDEX_MASK 0x3f0000 /* index */ -#define CC_INDEX_SHIFT 16 -#define CC_CB ((uint32)1 << 31) /* cam busy */ - -/* emac ethernet control */ -#define EC_EE ((uint32)1 << 0) /* emac enable */ -#define EC_ED ((uint32)1 << 1) /* emac disable */ -#define EC_ES ((uint32)1 << 2) /* emac soft reset */ -#define EC_EP ((uint32)1 << 3) /* external phy select */ - -/* emac transmit control */ -#define EXC_FD ((uint32)1 << 0) /* full duplex */ -#define EXC_FM ((uint32)1 << 1) /* flowmode */ -#define EXC_SB ((uint32)1 << 2) /* single backoff enable */ -#define EXC_SS ((uint32)1 << 3) /* small slottime */ - -/* emac mib control */ -#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */ - -/* sometimes you just need the enet rxheader definitions */ -#include <bcmenetrxh.h> - -#endif /* _bcmenet_47xx_h_ */ |