move package/linux into target/linux, use wbx' new kernel code. support building images with more than one kernel, split kernel module parts off of packages that use their own kernel modules (fuse, shfs, openswan). some cleanup in the image building process in target/. image builder is disabled for now, needs some fixing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1085 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 229 deletions

diff --git a/openwrt/package/linux/kernel-source/include/bcmenet47xx.h b/openwrt/package/linux/kernel-source/include/bcmenet47xx.h
deleted file mode 100644
index 22d7ee26d..000000000
--- a/openwrt/package/linux/kernel-source/include/bcmenet47xx.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Hardware-specific definitions for
- * Broadcom BCM47XX 10/100 Mbps Ethernet cores.
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id$
- */
-
-#ifndef	_bcmenet_47xx_h_
-#define	_bcmenet_47xx_h_
-
-#include <bcmdevs.h>
-#include <hnddma.h>
-
-#define	BCMENET_NFILTERS	64		/* # ethernet address filter entries */
-#define	BCMENET_MCHASHBASE	0x200		/* multicast hash filter base address */
-#define	BCMENET_MCHASHSIZE	256		/* multicast hash filter size in bytes */
-#define	BCMENET_MAX_DMA		4096		/* chip has 12 bits of DMA addressing */
-
-/* power management event wakeup pattern constants */
-#define	BCMENET_NPMP		4		/* chip supports 4 wakeup patterns */
-#define	BCMENET_PMPBASE		0x400		/* wakeup pattern base address */
-#define	BCMENET_PMPSIZE		0x80		/* 128bytes each pattern */
-#define	BCMENET_PMMBASE		0x600		/* wakeup mask base address */
-#define	BCMENET_PMMSIZE		0x10		/* 128bits each mask */
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define	_PADLINE(line)	pad ## line
-#define	_XSTR(line)	_PADLINE(line)
-#define	PAD		_XSTR(__LINE__)
-#endif	/* PAD */
-
-/* sometimes you just need the enet mib definitions */
-#include <bcmenetmib.h>
-
-/*
- * Host Interface Registers
- */
-typedef volatile struct _bcmenettregs {
-	/* Device and Power Control */
-	uint32	devcontrol;
-	uint32	PAD[2];
-	uint32	biststatus;
-	uint32	wakeuplength;
-	uint32	PAD[3];
-	
-	/* Interrupt Control */
-	uint32	intstatus;
-	uint32	intmask;
-	uint32	gptimer;
-	uint32	PAD[23];
-
-	/* Ethernet MAC Address Filtering Control */
-	uint32	PAD[2];
-	uint32	enetftaddr;
-	uint32	enetftdata;
-	uint32	PAD[2];
-
-	/* Ethernet MAC Control */
-	uint32	emactxmaxburstlen;
-	uint32	emacrxmaxburstlen;
-	uint32	emaccontrol;
-	uint32	emacflowcontrol;
-
-	uint32	PAD[20];
-
-	/* DMA Lazy Interrupt Control */
-	uint32	intrecvlazy;
-	uint32	PAD[63];
-
-	/* DMA engine */
-	dmaregs_t	dmaregs;
-	dmafifo_t	dmafifo;
-	uint32	PAD[116];
-
-	/* EMAC Registers */
-	uint32 rxconfig;
-	uint32 rxmaxlength;
-	uint32 txmaxlength;
-	uint32 PAD;
-	uint32 mdiocontrol;
-	uint32 mdiodata;
-	uint32 emacintmask;
-	uint32 emacintstatus;
-	uint32 camdatalo;
-	uint32 camdatahi;
-	uint32 camcontrol;
-	uint32 enetcontrol;
-	uint32 txcontrol;
-	uint32 txwatermark;
-	uint32 mibcontrol;
-	uint32 PAD[49];
-
-	/* EMAC MIB counters */
-	bcmenetmib_t	mib;
-
-	uint32	PAD[585];
-
-	/* Sonics SiliconBackplane config registers */
-	sbconfig_t	sbconfig;
-} bcmenetregs_t;
-
-/* device control */
-#define	DC_PM		((uint32)1 << 7)	/* pattern filtering enable */
-#define	DC_IP		((uint32)1 << 10)	/* internal ephy present (rev >= 1) */
-#define	DC_ER		((uint32)1 << 15)	/* ephy reset */
-#define	DC_MP		((uint32)1 << 16)	/* mii phy mode enable */
-#define	DC_CO		((uint32)1 << 17)	/* mii phy mode: enable clocks */
-#define	DC_PA_MASK	0x7c0000		/* mii phy mode: mdc/mdio phy address */
-#define	DC_PA_SHIFT	18
-
-/* wakeup length */
-#define	WL_P0_MASK	0x7f			/* pattern 0 */
-#define	WL_D0		((uint32)1 << 7)
-#define	WL_P1_MASK	0x7f00			/* pattern 1 */
-#define	WL_P1_SHIFT	8
-#define	WL_D1		((uint32)1 << 15)
-#define	WL_P2_MASK	0x7f0000		/* pattern 2 */
-#define	WL_P2_SHIFT	16
-#define	WL_D2		((uint32)1 << 23)
-#define	WL_P3_MASK	0x7f000000		/* pattern 3 */
-#define	WL_P3_SHIFT	24
-#define	WL_D3		((uint32)1 << 31)
-
-/* intstatus and intmask */
-#define	I_PME		((uint32)1 << 6)	/* power management event */
-#define	I_TO		((uint32)1 << 7)	/* general purpose timeout */
-#define	I_PC		((uint32)1 << 10)	/* descriptor error */
-#define	I_PD		((uint32)1 << 11)	/* data error */
-#define	I_DE		((uint32)1 << 12)	/* descriptor protocol error */
-#define	I_RU		((uint32)1 << 13)	/* receive descriptor underflow */
-#define	I_RO		((uint32)1 << 14)	/* receive fifo overflow */
-#define	I_XU		((uint32)1 << 15)	/* transmit fifo underflow */
-#define	I_RI		((uint32)1 << 16)	/* receive interrupt */
-#define	I_XI		((uint32)1 << 24)	/* transmit interrupt */
-#define	I_EM		((uint32)1 << 26)	/* emac interrupt */
-#define	I_MW		((uint32)1 << 27)	/* mii write */
-#define	I_MR		((uint32)1 << 28)	/* mii read */
-
-/* emaccontrol */
-#define	EMC_CG		((uint32)1 << 0)	/* crc32 generation enable */
-#define	EMC_EP		((uint32)1 << 2)	/* onchip ephy: powerdown (rev >= 1) */
-#define	EMC_ED		((uint32)1 << 3)	/* onchip ephy: energy detected (rev >= 1) */
-#define	EMC_LC_MASK	0xe0			/* onchip ephy: led control (rev >= 1) */
-#define	EMC_LC_SHIFT	5
-
-/* emacflowcontrol */
-#define	EMF_RFH_MASK	0xff			/* rx fifo hi water mark */
-#define	EMF_PG		((uint32)1 << 15)	/* enable pause frame generation */
-
-/* interrupt receive lazy */
-#define	IRL_TO_MASK	0x00ffffff		/* timeout */
-#define	IRL_FC_MASK	0xff000000		/* frame count */
-#define	IRL_FC_SHIFT	24			/* frame count */
-
-/* emac receive config */
-#define	ERC_DB		((uint32)1 << 0)	/* disable broadcast */
-#define	ERC_AM		((uint32)1 << 1)	/* accept all multicast */
-#define	ERC_RDT		((uint32)1 << 2)	/* receive disable while transmitting */
-#define	ERC_PE		((uint32)1 << 3)	/* promiscuous enable */
-#define	ERC_LE		((uint32)1 << 4)	/* loopback enable */
-#define	ERC_FE		((uint32)1 << 5)	/* enable flow control */
-#define	ERC_UF		((uint32)1 << 6)	/* accept unicast flow control frame */
-#define	ERC_RF		((uint32)1 << 7)	/* reject filter */
-
-/* emac mdio control */
-#define	MC_MF_MASK	0x7f			/* mdc frequency */
-#define	MC_PE		((uint32)1 << 7)	/* mii preamble enable */
-
-/* emac mdio data */
-#define	MD_DATA_MASK	0xffff			/* r/w data */
-#define	MD_TA_MASK	0x30000			/* turnaround value */
-#define	MD_TA_SHIFT	16
-#define	MD_TA_VALID	(2 << MD_TA_SHIFT)	/* valid ta */
-#define	MD_RA_MASK	0x7c0000		/* register address */
-#define	MD_RA_SHIFT	18
-#define	MD_PMD_MASK	0xf800000		/* physical media device */
-#define	MD_PMD_SHIFT	23
-#define	MD_OP_MASK	0x30000000		/* opcode */
-#define	MD_OP_SHIFT	28
-#define	MD_OP_WRITE	(1 << MD_OP_SHIFT)	/* write op */
-#define	MD_OP_READ	(2 << MD_OP_SHIFT)	/* read op */
-#define	MD_SB_MASK	0xc0000000		/* start bits */
-#define	MD_SB_SHIFT	30
-#define	MD_SB_START	(0x1 << MD_SB_SHIFT)	/* start of frame */
-
-/* emac intstatus and intmask */
-#define	EI_MII		((uint32)1 << 0)	/* mii mdio interrupt */
-#define	EI_MIB		((uint32)1 << 1)	/* mib interrupt */
-#define	EI_FLOW		((uint32)1 << 2)	/* flow control interrupt */
-
-/* emac cam data high */
-#define	CD_V		((uint32)1 << 16)	/* valid bit */
-
-/* emac cam control */
-#define	CC_CE		((uint32)1 << 0)	/* cam enable */
-#define	CC_MS		((uint32)1 << 1)	/* mask select */
-#define	CC_RD		((uint32)1 << 2)	/* read */
-#define	CC_WR		((uint32)1 << 3)	/* write */
-#define	CC_INDEX_MASK	0x3f0000		/* index */
-#define	CC_INDEX_SHIFT	16
-#define	CC_CB		((uint32)1 << 31)	/* cam busy */
-
-/* emac ethernet control */
-#define	EC_EE		((uint32)1 << 0)	/* emac enable */
-#define	EC_ED		((uint32)1 << 1)	/* emac disable */
-#define	EC_ES		((uint32)1 << 2)	/* emac soft reset */
-#define	EC_EP		((uint32)1 << 3)	/* external phy select */
-
-/* emac transmit control */
-#define	EXC_FD		((uint32)1 << 0)	/* full duplex */
-#define	EXC_FM		((uint32)1 << 1)	/* flowmode */
-#define	EXC_SB		((uint32)1 << 2)	/* single backoff enable */
-#define	EXC_SS		((uint32)1 << 3)	/* small slottime */
-
-/* emac mib control */
-#define	EMC_RZ		((uint32)1 << 0)	/* autoclear on read */
-
-/* sometimes you just need the enet rxheader definitions */
-#include <bcmenetrxh.h>
-
-#endif	/* _bcmenet_47xx_h_ */