diff options
Diffstat (limited to 'openwrt/package/busybox/config')
19 files changed, 0 insertions, 4338 deletions
diff --git a/openwrt/package/busybox/config/Config.in b/openwrt/package/busybox/config/Config.in deleted file mode 100644 index eedb4ba40..000000000 --- a/openwrt/package/busybox/config/Config.in +++ /dev/null @@ -1,406 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - - -config BUSYBOX_HAVE_DOT_CONFIG - bool - default y - -menu "Busybox Settings" - -menu "General Configuration" - -choice - prompt "Buffer allocation policy" - default BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK - help - There are 3 ways BusyBox can handle buffer allocations: - - Use malloc. This costs code size for the call to xmalloc. - - Put them on stack. For some very small machines with limited stack - space, this can be deadly. For most folks, this works just fine. - - Put them in BSS. This works beautifully for computers with a real - MMU (and OS support), but wastes runtime RAM for uCLinux. This - behavior was the only one available for BusyBox versions 0.48 and - earlier. - -config BUSYBOX_CONFIG_FEATURE_BUFFERS_USE_MALLOC - bool "Allocate with Malloc" - -config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK - bool "Allocate on the Stack" - -config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_IN_BSS - bool "Allocate in the .bss section" - -endchoice - -config BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE - bool "Show verbose applet usage messages" - default y - help - All BusyBox applets will show more verbose help messages when - busybox is invoked with --help. This will add a lot of text to the - busybox binary. In the default configuration, this will add about - 13k, but it can add much more depending on your configuration. - -config BUSYBOX_CONFIG_FEATURE_INSTALLER - bool "Support --install [-s] to install applet links at runtime" - default n - help - Enable 'busybox --install [-s]' support. This will allow you to use - busybox at runtime to create hard links or symlinks for all the - applets that are compiled into busybox. This feature requires the - /proc filesystem. - -config BUSYBOX_CONFIG_LOCALE_SUPPORT - bool "Enable locale support (system needs locale for this to work)" - default n - help - Enable this if your system has locale support and you would like - busybox to support locale settings. - -config BUSYBOX_CONFIG_FEATURE_DEVFS - bool "Support for devfs" - default y - help - Enable if you want BusyBox to work with devfs. - -config BUSYBOX_CONFIG_FEATURE_DEVPTS - bool "Use the devpts filesystem for Unix98 PTYs" - default y if BUSYBOX_CONFIG_FEATURE_DEVFS - help - Enable if you want BusyBox to use Unix98 PTY support. If enabled, - busybox will use /dev/ptmx for the master side of the pseudoterminal - and /dev/pts/<number> for the slave side. Otherwise, BSD style - /dev/ttyp<number> will be used. To use this option, you should have - devpts or devfs mounted. - -config BUSYBOX_CONFIG_FEATURE_CLEAN_UP - bool "Clean up all memory before exiting (usually not needed)" - default n - help - As a size optimization, busybox normally exits without explicitly - freeing dynamically allocated memory or closing files. This saves - space since the OS will clean up for us, but it can confuse debuggers - like valgrind, which report tons of memory and resource leaks. - - Don't enable this unless you have a really good reason to clean - things up manually. - -config BUSYBOX_CONFIG_FEATURE_SUID - bool "Support for SUID/SGID handling" - default y - help - Support SUID and SGID binaries. - -config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG - bool "Runtime SUID/SGID configuration via /etc/busybox.conf" - default n if BUSYBOX_CONFIG_FEATURE_SUID - depends on BUSYBOX_CONFIG_FEATURE_SUID - help - Allow the SUID / SGID state of an applet to be determined runtime by - checking /etc/busybox.conf. The format of this file is as follows: - - <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>) - - An example might help: - - [SUID] - su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0 - su = ssx # exactly the same - - mount = sx- root.disk # applet mount can be run by root and members of group disk - # and runs with euid=0 - - cp = --- # disable applet cp for everyone - - The file has to be owned by user root, group root and has to be - writeable only by root: - (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf) - The busybox executable has to be owned by user root, group - root and has to be setuid root for this to work: - (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox) - - Robert 'sandman' Griebl has more information here: - <url: http://www.softforge.de/bb/suid.html >. - -config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG_QUIET - bool "Suppress warning message if /etc/busybox.conf is not readable" - default n - depends on BUSYBOX_CONFIG_FEATURE_SUID_CONFIG - help - /etc/busybox.conf should be readable by the user needing the SUID, check - this option to avoid users to be notified about missing permissions. - -config BUSYBOX_CONFIG_SELINUX - bool "Support NSA Security Enhanced Linux" - default n - help - Enable support for SE Linux in applets ls, ps, and id. Also provide - the option of compiling in SE Linux applets. - - If you do not have a complete SE Linux Full Userland installed, this - stuff will not compile. Go visit - http://www.nsa.gov/selinux/index.html - to download the necessary stuff to allow busybox to compile with this - option enabled. - - Most people will leave this set to 'N'. - -endmenu - -menu 'Build Options' - -config BUSYBOX_CONFIG_STATIC - bool "Build BusyBox as a static binary (no shared libs)" - default n - help - If you want to build a static BusyBox binary, which does not - use or require any shared libraries, then enable this option. - This can cause BusyBox to be considerably larger, so you should - leave this option false unless you have a good reason (i.e. - your target platform does not support shared libraries, or - you are building an initrd which doesn't need anything but - BusyBox, etc). - - Most people will leave this set to 'N'. - -# The busybox shared library feature is there so make standalone can produce -# smaller applets. Since make standalone isn't in yet, there's nothing using -# this yet, and so it's disabled. -config BUSYBOX_CONFIG_DISABLE_SHARED - bool - default n - -config BUSYBOX_CONFIG_BUILD_LIBBUSYBOX - bool "Build shared libbusybox" - default n - depends on BUSYBOX_CONFIG_DISABLE_SHARED - help - Build a shared library libbusybox.so which contains all - libraries used inside busybox. - -config BUSYBOX_CONFIG_FEATURE_FULL_LIBBUSYBOX - bool "Feature-complete libbusybox" - default n if !CONFIG_FEATURE_SHARED_BUSYBOX - depends on BUSYBOX_CONFIG_BUILD_LIBBUSYBOX - help - Build a libbusybox with the complete feature-set, disregarding - the actually selected config. - - Normally, libbusybox will only contain the features which are - used by busybox itself. If you plan to write a separate - standalone application which uses libbusybox say 'Y'. - - Note: libbusybox is GPL, not LGPL, and exports no stable API that - might act as a copyright barrier. We can and will modify the - exported function set between releases (even minor version number - changes), and happily break out-of-tree features. - - Say 'N' if in doubt. - -config BUSYBOX_CONFIG_FEATURE_SHARED_BUSYBOX - bool "Use shared libbusybox for busybox" - default n if BUSYBOX_CONFIG_BUILD_LIBBUSYBOX - depends on !CONFIG_STATIC && BUSYBOX_CONFIG_BUILD_LIBBUSYBOX - help - Use libbusybox.so also for busybox itself. - You need to have a working dynamic linker to use this variant. - -config BUSYBOX_CONFIG_LFS - bool - default y - select BUSYBOX_FDISK_SUPPORT_LARGE_DISKS - help - If you want to build BusyBox with large file support, then enable - this option. This will have no effect if your kernel or your C - library lacks large file support for large files. Some of the - programs that can benefit from large file support include dd, gzip, - cp, mount, tar, and many others. If you want to access files larger - than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'. - -config BUSYBOX_USING_CROSS_COMPILER - bool - default y - help - Do you want to build BusyBox with a Cross Compiler? If so, - then enable this option. Otherwise leave it set to 'N'. - -config BUSYBOX_CROSS_COMPILER_PREFIX - string - default "mipsel-uclibc-" - depends on BUSYBOX_USING_CROSS_COMPILER - help - If you want to build BusyBox with a cross compiler, then you - will need to set this to the cross-compiler prefix. For example, - if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc - then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here, - which will ensure the correct compiler is used. - -config BUSYBOX_EXTRA_CFLAGS_OPTIONS - string - default "-Os " - help - Do you want to pass any extra CFLAGS options to the compiler as - you build BusyBox? If so, this is the option for you... For example, - if you want to add some simple compiler switches (like -march=i686), - or check for warnings using -Werror, just those options here. - -config BUSYBOX_CONFIG_BUILD_AT_ONCE - bool "Compile all sources at once" - default n - help - Normally each source-file is compiled with one invocation of - the compiler. - If you set this option, all sources are compiled at once. - This gives the compiler more opportunities to optimize which can - result in smaller and/or faster binaries. - - Setting this option will consume alot of memory, e.g. if you - enable all applets with all features, gcc uses more than 300MB - RAM during compilation of busybox. - - This option is most likely only beneficial for newer compilers - such as gcc-4.1 and above. - - Say 'N' unless you know what you are doing. - -endmenu - -menu 'Debugging Options' - -config BUSYBOX_CONFIG_DEBUG - bool "Build BusyBox with Debugging symbols" - default n - help - Say Y here if you wish to compile BusyBox with debugging symbols. - This will allow you to use a debugger to examine BusyBox internals - while applets are running. This increases the size of the binary - considerably and should only be used when doing development. - If you are doing development and want to debug BusyBox, answer Y. - - Most people should answer N. - -choice - prompt "Additional debugging library" - default BUSYBOX_CONFIG_NO_DEBUG_LIB - depends on BUSYBOX_CONFIG_DEBUG - help - Using an additional debugging library will make BusyBox become - considerable larger and will cause it to run more slowly. You - should always leave this option disabled for production use. - - dmalloc support: - ---------------- - This enables compiling with dmalloc ( http://dmalloc.com/ ) - which is an excellent public domain mem leak and malloc problem - detector. To enable dmalloc, before running busybox you will - want to properly set your environment, for example: - export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile - The 'debug=' value is generated using the following command - dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \ - -p check-fence -p check-heap -p check-lists -p check-blank \ - -p check-funcs -p realloc-copy -p allow-free-null - - Electric-fence support: - ----------------------- - This enables compiling with Electric-fence support. Electric - fence is another very useful malloc debugging library which uses - your computer's virtual memory hardware to detect illegal memory - accesses. This support will make BusyBox be considerable larger - and run slower, so you should leave this option disabled unless - you are hunting a hard to find memory problem. - - -config BUSYBOX_CONFIG_NO_DEBUG_LIB - bool "None" - -config BUSYBOX_CONFIG_DMALLOC - bool "Dmalloc" - -config BUSYBOX_CONFIG_EFENCE - bool "Electric-fence" - -endchoice - -config BUSYBOX_CONFIG_DEBUG_YANK_SUSv2 - bool "Disable obsolete features removed before SUSv3?" - default y - help - This option will disable backwards compatability with SuSv2, - specifically, old-style numeric options ('command -1 <file>') - will not be supported in head, tail, and fold. (Note: should - yank from renice too.) - -endmenu - -menu 'Installation Options' - -config BUSYBOX_CONFIG_INSTALL_NO_USR - bool "Don't use /usr" - default n - help - Disable use of /usr. Don't activate this option if you don't know - that you really want this behaviour. - -choice - prompt "Applets links" - default BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS - help - Choose how you install applets links. - -config BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS - bool "as soft-links" - help - Install applets as soft-links to the busybox binary. This needs some - free inodes on the filesystem, but might help with filesystem - generators that can't cope with hard-links. - -config BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS - bool "as hard-links" - help - Install applets as hard-links to the busybox binary. This might count - on a filesystem with few inodes. - -config BUSYBOX_CONFIG_INSTALL_APPLET_DONT - bool - prompt "not installed" - depends on BUSYBOX_CONFIG_FEATURE_INSTALLER || BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL - help - Do not install applets links. Usefull when using the -install feature - or a standalone shell for rescue pruposes. - -endchoice - -config BUSYBOX_PREFIX - string - default "./_install" - help - Define your directory to install BusyBox files/subdirs in. - -endmenu - -source package/busybox/config/libbb/Config.in - -endmenu - -comment "Applets" - -source package/busybox/config/archival/Config.in -source package/busybox/config/coreutils/Config.in -source package/busybox/config/console-tools/Config.in -source package/busybox/config/debianutils/Config.in -source package/busybox/config/editors/Config.in -source package/busybox/config/findutils/Config.in -source package/busybox/config/init/Config.in -source package/busybox/config/loginutils/Config.in -source package/busybox/config/e2fsprogs/Config.in -source package/busybox/config/modutils/Config.in -source package/busybox/config/util-linux/Config.in -source package/busybox/config/miscutils/Config.in -source package/busybox/config/networking/Config.in -source package/busybox/config/procps/Config.in -source package/busybox/config/shell/Config.in -source package/busybox/config/sysklogd/Config.in diff --git a/openwrt/package/busybox/config/archival/Config.in b/openwrt/package/busybox/config/archival/Config.in deleted file mode 100644 index bd5c4b140..000000000 --- a/openwrt/package/busybox/config/archival/Config.in +++ /dev/null @@ -1,308 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Archival Utilities" - -config BUSYBOX_CONFIG_AR - bool "ar" - default n - help - ar is an archival utility program used to create, modify, and - extract contents from archives. An archive is a single file holding - a collection of other files in a structure that makes it possible to - retrieve the original individual files (called archive members). - The original files' contents, mode (permissions), timestamp, owner, - and group are preserved in the archive, and can be restored on - extraction. - - The stored filename is limited to 15 characters. (for more information - see long filename support). - ar has 60 bytes of overheads for every stored file. - - This implementation of ar can extract archives, it cannot create or - modify them. - On an x86 system, the ar applet adds about 1K. - - Unless you have a specific application which requires ar, you should - probably say N here. - -config BUSYBOX_CONFIG_FEATURE_AR_LONG_FILENAMES - bool " Enable support for long filenames (not need for debs)" - default n - depends on BUSYBOX_CONFIG_AR - help - By default the ar format can only store the first 15 characters of the - filename, this option removes that limitation. - It supports the GNU ar long filename method which moves multiple long - filenames into a the data section of a new ar entry. - -config BUSYBOX_CONFIG_BUNZIP2 - bool "bunzip2" - default y - help - bunzip2 is a compression utility using the Burrows-Wheeler block - sorting text compression algorithm, and Huffman coding. Compression - is generally considerably better than that achieved by more - conventional LZ77/LZ78-based compressors, and approaches the - performance of the PPM family of statistical compressors. - - The BusyBox bunzip2 applet is limited to de-compression only. - On an x86 system, this applet adds about 11K. - - Unless you have a specific application which requires bunzip2, you - should probably say N here. - -config BUSYBOX_CONFIG_CPIO - bool "cpio" - default n - help - cpio is an archival utility program used to create, modify, and extract - contents from archives. - cpio has 110 bytes of overheads for every stored file. - - This implementation of cpio can extract cpio archives created in the - "newc" or "crc" format, it cannot create or modify them. - - Unless you have a specific application which requires cpio, you should - probably say N here. - -config BUSYBOX_CONFIG_DPKG - bool "dpkg" - default n - help - dpkg is a medium-level tool to install, build, remove and manage Debian packages. - - This implementation of dpkg has a number of limitations, you should use the - official dpkg if possible. - -config BUSYBOX_CONFIG_DPKG_DEB - bool "dpkg_deb" - default n - help - dpkg-deb packs, unpacks and provides information about Debian archives. - - This implementation of dpkg-deb cannot pack archives. - - Unless you have a specific application which requires dpkg-deb, you should - probably say N here. - -config BUSYBOX_CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY - bool " extract only (-x)" - default n - depends on BUSYBOX_CONFIG_DPKG_DEB - help - This reduces dpkg-deb to the equivalent of "ar -p <deb> data.tar.gz | tar -zx". - However it saves space as none of the extra dpkg-deb, ar or tar options are - needed, they are linked to internally. - -config BUSYBOX_CONFIG_GUNZIP - bool "gunzip" - default y - help - gunzip is used to decompress archives created by gzip. - You can use the `-t' option to test the integrity of - an archive, without decompressing it. - -config BUSYBOX_CONFIG_FEATURE_GUNZIP_UNCOMPRESS - bool " Uncompress support" - default y - depends on BUSYBOX_CONFIG_GUNZIP - help - Enable if you want gunzip to have the ability to decompress - archives created by the program compress (not much - used anymore). - -config BUSYBOX_CONFIG_GZIP - bool "gzip" - default y - help - gzip is used to compress files. - It's probably the most widely used UNIX compression program. - -config BUSYBOX_CONFIG_IPKG - bool "ipkg" - default y - select BUSYBOX_CONFIG_MD5SUM - select BUSYBOX_CONFIG_WGET - help - ipkg is the itsy package management system. - -config BUSYBOX_CONFIG_RPM2CPIO - bool "rpm2cpio" - default n - help - Converts an RPM file into a CPIO archive. - -config BUSYBOX_CONFIG_RPM - bool "rpm" - default n - help - Mini RPM applet - queries and extracts - -config BUSYBOX_CONFIG_TAR - bool "tar" - default y - help - tar is an archiving program. It's commonly used with gzip to - create compressed archives. It's probably the most widely used - UNIX archive program. - -config BUSYBOX_CONFIG_FEATURE_TAR_CREATE - bool " Enable archive creation" - default y - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option you'll be able to create - tar archives using the `-c' option. - -config BUSYBOX_CONFIG_FEATURE_TAR_BZIP2 - bool " Enable -j option to handle .tar.bz2 files" - default y - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option you'll be able to extract - archives compressed with bzip2. - -config BUSYBOX_CONFIG_FEATURE_TAR_LZMA - bool " Enable -a option to handle .tar.lzma files" - default n - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option you'll be able to extract - archives compressed with lzma. - -config BUSYBOX_CONFIG_FEATURE_TAR_FROM - bool " Enable -X (exclude from) and -T (include from) options)" - default y - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option you'll be able to specify - a list of files to include or exclude from an archive. - -config BUSYBOX_CONFIG_FEATURE_TAR_GZIP - bool " Enable -z option" - default y - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option tar will be able to call gzip, - when creating or extracting tar gziped archives. - -config BUSYBOX_CONFIG_FEATURE_TAR_COMPRESS - bool " Enable -Z option" - default n - depends on BUSYBOX_CONFIG_TAR - help - If you enable this option tar will be able to call uncompress, - when extracting .tar.Z archives. - -config BUSYBOX_CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY - bool " Enable support for old tar header format" - default n - depends on BUSYBOX_CONFIG_TAR - help - This option is required to unpack archives created in - the old GNU format; help to kill this old format by - repacking your ancient archives with the new format. - -config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS - bool " Enable support for some GNU tar extensions" - default y - depends on BUSYBOX_CONFIG_TAR - help - With this option busybox supports GNU long filenames and - linknames. - -config BUSYBOX_CONFIG_FEATURE_TAR_LONG_OPTIONS - bool " Enable long options" - default n - depends on BUSYBOX_CONFIG_TAR - help - Enable use of long options, increases size by about 400 Bytes - -config BUSYBOX_CONFIG_UNCOMPRESS - bool "uncompress" - default n - help - uncompress is used to decompress archives created by compress. - Not much used anymore, replaced by gzip/gunzip. - -config BUSYBOX_CONFIG_UNLZMA - bool "unlzma" - default n - help - unlzma is a compression utility using the Lempel-Ziv-Markov chain - compression algorithm, and range coding. Compression - is generally considerably better than that achieved by the bzip2 - compressors. - - The BusyBox unlzma applet is limited to de-compression only. - On an x86 system, this applet adds about 4K. - - Unless you have a specific application which requires unlzma, you - should probably say N here. - -config BUSYBOX_CONFIG_FEATURE_LZMA_FAST - bool " Optimze unlzma for speed" - default n - depends on BUSYBOX_CONFIG_UNLZMA - help - This option reduce decompression time by about 33% at the cost of - a 2K bigger binary. - -config BUSYBOX_CONFIG_UNZIP - bool "unzip" - default n - help - unzip will list or extract files from a ZIP archive, - commonly found on DOS/WIN systems. The default behavior - (with no options) is to extract the archive into the - current directory. Use the `-d' option to extract to a - directory of your choice. - -comment "Common options for cpio and tar" - depends on BUSYBOX_CONFIG_CPIO || BUSYBOX_CONFIG_TAR - -config BUSYBOX_CONFIG_FEATURE_UNARCHIVE_TAPE - bool " Enable tape drive support" - default n - depends on BUSYBOX_CONFIG_CPIO || BUSYBOX_CONFIG_TAR - help - I don't think this is needed anymore. - -comment "Common options for dpkg and dpkg_deb" - depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB - -config BUSYBOX_CONFIG_FEATURE_DEB_TAR_GZ - bool " gzip debian packages (normal)" - default n if BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB - depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB - help - This is the default compression method inside the debian ar file. - - If you want compatibility with standard .deb's you should say yes here. - -config BUSYBOX_CONFIG_FEATURE_DEB_TAR_BZ2 - bool " bzip2 debian packages" - default n - depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB - help - This allows dpkg and dpkg-deb to extract deb's that are compressed internally - with bzip2 instead of gzip. - - You only want this if you are creating your own custom debian packages that - use an internal control.tar.bz2 or data.tar.bz2. - -config BUSYBOX_CONFIG_FEATURE_DEB_TAR_LZMA - bool " lzma debian packages" - default n - depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB - help - This allows dpkg and dpkg-deb to extract deb's that are compressed - internally with lzma instead of gzip. - - You only want this if you are creating your own custom debian - packages that use an internal control.tar.lzma or data.tar.lzma. - -endmenu diff --git a/openwrt/package/busybox/config/console-tools/Config.in b/openwrt/package/busybox/config/console-tools/Config.in deleted file mode 100644 index 4faaeb44b..000000000 --- a/openwrt/package/busybox/config/console-tools/Config.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Console Utilities" - -config BUSYBOX_CONFIG_CHVT - bool "chvt" - default n - help - This program is used to change to another terminal. - Example: chvt 4 (change to terminal /dev/tty4) - -config BUSYBOX_CONFIG_CLEAR - bool "clear" - default y - help - This program clears the terminal screen. - -config BUSYBOX_CONFIG_DEALLOCVT - bool "deallocvt" - default n - help - This program deallocates unused virtual consoles. - -config BUSYBOX_CONFIG_DUMPKMAP - bool "dumpkmap" - default n - help - This program dumps the kernel's keyboard translation table to - stdout, in binary format. You can then use loadkmap to load it. - -config BUSYBOX_CONFIG_LOADFONT - bool "loadfont" - default n - help - This program loads a console font from standard input. - -config BUSYBOX_CONFIG_LOADKMAP - bool "loadkmap" - default n - help - This program loads a keyboard translation table from - standard input. - -config BUSYBOX_CONFIG_OPENVT - bool "openvt" - default n - help - This program is used to start a command on an unused - virtual terminal. - -config BUSYBOX_CONFIG_RESET - bool "reset" - default y - help - This program is used to reset the terminal screen, if it - gets messed up. - -config BUSYBOX_CONFIG_SETCONSOLE - bool "setconsole" - default n - help - This program redirects the system console to another device, - like the current tty while logged in via telnet. - -config BUSYBOX_CONFIG_SETKEYCODES - bool "setkeycodes" - default n - help - This program loads entries into the kernel's scancode-to-keycode - map, allowing unusual keyboards to generate usable keycodes. - -endmenu diff --git a/openwrt/package/busybox/config/coreutils/Config.in b/openwrt/package/busybox/config/coreutils/Config.in deleted file mode 100644 index 53984e395..000000000 --- a/openwrt/package/busybox/config/coreutils/Config.in +++ /dev/null @@ -1,679 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Coreutils" - -config BUSYBOX_CONFIG_BASENAME - bool "basename" - default y - help - basename is used to strip the directory and suffix from filenames, - leaving just the filename itself. Enable this option if you wish - to enable the 'basename' utility. - -config BUSYBOX_CONFIG_CAL - bool "cal" - default n - help - cal is used to display a monthly calender. - -config BUSYBOX_CONFIG_CAT - bool "cat" - default y - help - cat is used to concatenate files and print them to the standard - output. Enable this option if you wish to enable the 'cat' utility. - -config BUSYBOX_CONFIG_CHGRP - bool "chgrp" - default y - help - chgrp is used to change the group ownership of files. - -config BUSYBOX_CONFIG_CHMOD - bool "chmod" - default y - help - chmod is used to change the access permission of files. - -config BUSYBOX_CONFIG_CHOWN - bool "chown" - default y - help - chown is used to change the user and/or group ownership - of files. - -config BUSYBOX_CONFIG_CHROOT - bool "chroot" - default y - help - chroot is used to change the root directory and run a command. - The default command is `/bin/sh'. - -config BUSYBOX_CONFIG_CMP - bool "cmp" - default n - help - cmp is used to compare two files and returns the result - to standard output. - -config BUSYBOX_CONFIG_COMM - bool "comm" - default n - help - comm is used to compare two files line by line and return - a three-column output. - -config BUSYBOX_CONFIG_CP - bool "cp" - default y - help - cp is used to copy files and directories. - -config BUSYBOX_CONFIG_CUT - bool "cut" - default y - help - cut is used to print selected parts of lines from - each file to stdout. - -config BUSYBOX_CONFIG_DATE - bool "date" - default y - help - date is used to set the system date or display the - current time in the given format. - -config BUSYBOX_CONFIG_FEATURE_DATE_ISOFMT - bool " Enable ISO date format output (-I)" - default y - depends on BUSYBOX_CONFIG_DATE - help - Enable option (-I) to output an ISO-8601 compliant - date/time string. - -config BUSYBOX_CONFIG_DD - bool "dd" - default y - help - dd copies a file (from standard input to standard output, - by default) using specific input and output blocksizes, - while optionally performing conversions on it. - -config BUSYBOX_CONFIG_DF - bool "df" - default y - help - df reports the amount of disk space used and available - on filesystems. - -config BUSYBOX_CONFIG_DIRNAME - bool "dirname" - default y - help - dirname is used to strip a non-directory suffix from - a file name. - -config BUSYBOX_CONFIG_DOS2UNIX - bool "dos2unix/unix2dos" - default n - help - dos2unix is used to convert a text file from DOS format to - UNIX format, and vice versa. - -config BUSYBOX_CONFIG_UNIX2DOS - bool - default n - depends on BUSYBOX_CONFIG_DOS2UNIX - -config BUSYBOX_CONFIG_DU - bool "du (default blocksize of 512 bytes)" - default y - help - du is used to report the amount of disk space used - for specified files. - -config BUSYBOX_CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K - bool " Use a default blocksize of 1024 bytes (1K)" - default y - depends on BUSYBOX_CONFIG_DU - help - Use a blocksize of (1K) instead of the default 512b. - -config BUSYBOX_CONFIG_ECHO - bool "echo (basic SuSv3 version taking no options)" - default y - help - echo is used to print a specified string to stdout. - -# this entry also appears in shell/Config.in, next to the echo builtin -config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO - bool " Enable echo options (-n and -e)" - default y - depends on BUSYBOX_CONFIG_ECHO - help - This adds options (-n and -e) to echo. - -config BUSYBOX_CONFIG_ENV - bool "env" - default y - help - env is used to set an environment variable and run - a command; without options it displays the current - environment. - -config BUSYBOX_CONFIG_EXPR - bool "expr" - default y - help - expr is used to calculate numbers and print the result - to standard output. - -config BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64 - bool " Extend Posix numbers support to 64 bit" - default n - depends on BUSYBOX_CONFIG_EXPR - help - Enable 64-bit math support in the expr applet. This will make - the applet slightly larger, but will allow computation with very - large numbers. - -config BUSYBOX_CONFIG_FALSE - bool "false" - default y - help - false returns an exit code of FALSE (1). - -config BUSYBOX_CONFIG_FOLD - bool "fold" - default n - help - Wrap text to fit a specific width. - -config BUSYBOX_CONFIG_HEAD - bool "head" - default y - help - head is used to print the first specified number of lines - from files. - -config BUSYBOX_CONFIG_FEATURE_FANCY_HEAD - bool " Enable head options (-c, -q, and -v)" - default y - depends on BUSYBOX_CONFIG_HEAD - help - This enables the head options (-c, -q, and -v). - -config BUSYBOX_CONFIG_HOSTID - bool "hostid" - default y - help - hostid prints the numeric identifier (in hexadecimal) for - the current host. - -config BUSYBOX_CONFIG_ID - bool "id" - default y - help - id displays the current user and group ID names. - -config BUSYBOX_CONFIG_INSTALL - bool "install" - default n - help - Copy files and set attributes. - -config BUSYBOX_CONFIG_LENGTH - bool "length" - default y - help - length is used to print out the length of a specified string. - -config BUSYBOX_CONFIG_LN - bool "ln" - default y - help - ln is used to create hard or soft links between files. - -config BUSYBOX_CONFIG_LOGNAME - bool "logname" - default n - help - logname is used to print the current user's login name. - -config BUSYBOX_CONFIG_LS - bool "ls" - default y - help - ls is used to list the contents of directories. - -config BUSYBOX_CONFIG_FEATURE_LS_FILETYPES - bool " Enable filetyping options (-p and -F)" - default y - depends on BUSYBOX_CONFIG_LS - help - Enable the ls options (-p and -F). - -config BUSYBOX_CONFIG_FEATURE_LS_FOLLOWLINKS - bool " Enable symlinks dereferencing (-L)" - default y - depends on BUSYBOX_CONFIG_LS - help - Enable the ls option (-L). - -config BUSYBOX_CONFIG_FEATURE_LS_RECURSIVE - bool " Enable recursion (-R)" - default y - depends on BUSYBOX_CONFIG_LS - help - Enable the ls option (-R). - -config BUSYBOX_CONFIG_FEATURE_LS_SORTFILES - bool " Sort the file names" - default y - depends on BUSYBOX_CONFIG_LS - help - Allow ls to sort file names alphabetically. - -config BUSYBOX_CONFIG_FEATURE_LS_TIMESTAMPS - bool " Show file timestamps" - default y - depends on BUSYBOX_CONFIG_LS - help - Allow ls to display timestamps for files. - -config BUSYBOX_CONFIG_FEATURE_LS_USERNAME - bool " Show username/groupnames" - default y - depends on BUSYBOX_CONFIG_LS - help - Allow ls to display username/groupname for files. - -config BUSYBOX_CONFIG_FEATURE_LS_COLOR - bool " Allow use of color to identify file types" - default y - depends on BUSYBOX_CONFIG_LS - help - This enables the --color option to ls. - -config BUSYBOX_CONFIG_FEATURE_LS_COLOR_IS_DEFAULT - bool " Produce colored ls output by default" - default y - depends on BUSYBOX_CONFIG_FEATURE_LS_COLOR - help - Saying yes here will turn coloring on by default, - even if no "--color" option is given to the ls command. - This is not recommended, since the colors are not - configurable, and the output may not be legible on - many output screens. - -config BUSYBOX_CONFIG_MD5SUM - bool "md5sum" - default y - help - md5sum is used to print or check MD5 checksums. - -config BUSYBOX_CONFIG_MKDIR - bool "mkdir" - default y - help - mkdir is used to create directories with the specified names. - -config BUSYBOX_CONFIG_MKFIFO - bool "mkfifo" - default y - help - mkfifo is used to create FIFOs (named pipes). - The `mknod' program can also create FIFOs. - -config BUSYBOX_CONFIG_MKNOD - bool "mknod" - default n - help - mknod is used to create FIFOs or block/character special - files with the specified names. - -config BUSYBOX_CONFIG_MV - bool "mv" - default y - help - mv is used to move or rename files or directories. - -config BUSYBOX_CONFIG_NICE - bool "nice" - default n - help - nice runs a program with modified scheduling priority. - -config BUSYBOX_CONFIG_NOHUP - bool "nohup" - default n - help - run a command immune to hangups, with output to a non-tty. - -config BUSYBOX_CONFIG_OD - bool "od" - default n - help - od is used to dump binary files in octal and other formats. - -config BUSYBOX_CONFIG_PRINTENV - bool "printenv" - default n - help - printenv is used to print all or part of environment. - -config BUSYBOX_CONFIG_PRINTF - bool "printf" - default y - help - printf is used to format and print specified strings. - It's similar to `echo' except it has more options. - -config BUSYBOX_CONFIG_PWD - bool "pwd" - default y - help - pwd is used to print the current directory. - -config BUSYBOX_CONFIG_REALPATH - bool "realpath" - default n - help - Return the canonicalized absolute pathname. - This isn't provided by GNU shellutils, but where else does it belong. - -config BUSYBOX_CONFIG_RM - bool "rm" - default y - help - rm is used to remove files or directories. - -config BUSYBOX_CONFIG_RMDIR - bool "rmdir" - default y - help - rmdir is used to remove empty directories. - -config BUSYBOX_CONFIG_SEQ - bool "seq" - default y - help - print a sequence of numbers - -config BUSYBOX_CONFIG_SHA1SUM - bool "sha1sum" - default n - help - Compute and check SHA1 message digest - -config BUSYBOX_CONFIG_SLEEP - bool "sleep (single integer arg with no suffix)" - default y - help - sleep is used to pause for a specified number of seconds, - -config BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP - bool " Enable multiple integer args and optional time suffixes" - default y - depends on BUSYBOX_CONFIG_SLEEP - help - Allow sleep to pause for specified minutes, hours, and days. - -config BUSYBOX_CONFIG_SORT - bool "sort" - default y - help - sort is used to sort lines of text in specified files. - -config BUSYBOX_CONFIG_FEATURE_SORT_BIG - bool " full SuSv3 compliant sort (Support -ktcsbdfiozgM)" - default n - depends on BUSYBOX_CONFIG_SORT - help - Without this, sort only supports -r, -u, and an integer version - of -n. Selecting this adds sort keys, floating point support, and - more. This adds a little over 3k to a nonstatic build on x86. - - The SuSv3 sort standard is available at: - http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html - -config BUSYBOX_CONFIG_STAT - bool "stat" - default n - help - display file or filesystem status. - -config BUSYBOX_CONFIG_FEATURE_STAT_FORMAT - bool " Enable custom formats (-c)" - default n - depends on BUSYBOX_CONFIG_STAT - help - Without this, stat will not support the '-c format' option where - users can pass a custom format string for output. This adds about - 7k to a nonstatic build on amd64. - -config BUSYBOX_CONFIG_STTY - bool "stty" - default n - help - stty is used to change and print terminal line settings. - -config BUSYBOX_CONFIG_SUM - bool "sum" - default n - help - checksum and count the blocks in a file - -config BUSYBOX_CONFIG_SYNC - bool "sync" - default y - help - sync is used to flush filesystem buffers. - -config BUSYBOX_CONFIG_TAIL - bool "tail" - default y - help - tail is used to print the last specified number of lines - from files. - -config BUSYBOX_CONFIG_FEATURE_FANCY_TAIL - bool " Enable extra tail options (-q, -s, and -v)" - default y - depends on BUSYBOX_CONFIG_TAIL - help - The options (-q, -s, and -v) are provided by GNU tail, but - are not specific in the SUSv3 standard. - -config BUSYBOX_CONFIG_TEE - bool "tee" - default y - help - tee is used to read from standard input and write - to standard output and files. - -config BUSYBOX_CONFIG_FEATURE_TEE_USE_BLOCK_IO - bool " Enable block i/o (larger/faster) instead of byte i/o." - default y - depends on BUSYBOX_CONFIG_TEE - help - Enable this option for a faster tee, at expense of size. - -config BUSYBOX_CONFIG_TEST - bool "test" - default y - help - test is used to check file types and compare values, - returning an appropriate exit code. The shells (ash - and bash) have test builtin. - -config BUSYBOX_CONFIG_FEATURE_TEST_64 - bool " Extend test to 64 bit" - default n - depends on BUSYBOX_CONFIG_TEST - help - Enable 64-bit support in test. - -config BUSYBOX_CONFIG_TOUCH - bool "touch" - default y - help - touch is used to create or change the access and/or - modification timestamp of specified files. - -config BUSYBOX_CONFIG_TR - bool "tr" - default y - help - tr is used to squeeze, and/or delete characters from standard - input, writing to standard output. - -config BUSYBOX_CONFIG_FEATURE_TR_CLASSES - bool " Enable character classes (such as [:upper:])" - default n - depends on BUSYBOX_CONFIG_TR - help - Enable character classes, enabling commands such as: - tr [:upper:] [:lower:] to convert input into lowercase. - -config BUSYBOX_CONFIG_FEATURE_TR_EQUIV - bool " Enable equivalence classes" - default n - depends on BUSYBOX_CONFIG_TR - help - Enable equivalence classes, which essentially add the enclosed - character to the current set. For instance, tr [=a=] xyz would - replace all instances of 'a' with 'xyz'. This option is mainly - useful for cases when no other way of expressing a character - is possible. - -config BUSYBOX_CONFIG_TRUE - bool "true" - default y - help - true returns an exit code of TRUE (0). - -config BUSYBOX_CONFIG_TTY - bool "tty" - default n - help - tty is used to print the name of the current terminal to - standard output. - -config BUSYBOX_CONFIG_UNAME - bool "uname" - default y - help - uname is used to print system information. - -config BUSYBOX_CONFIG_UNIQ - bool "uniq" - default y - help - uniq is used to remove duplicate lines from a sorted file. - -config BUSYBOX_CONFIG_USLEEP - bool "usleep" - default n - help - usleep is used to pause for a specified number of microseconds. - -config BUSYBOX_CONFIG_UUDECODE - bool "uudecode" - default n - help - uudecode is used to decode a uuencoded file. - -config BUSYBOX_CONFIG_UUENCODE - bool "uuencode" - default n - help - uuencode is used to uuencode a file. - -config BUSYBOX_CONFIG_WATCH - bool "watch" - default n - select BUSYBOX_CONFIG_DATE - help - watch is used to execute a program periodically, showing - output to the screen. - -config BUSYBOX_CONFIG_WC - bool "wc" - default y - help - wc is used to print the number of bytes, words, and lines, - in specified files. - -config BUSYBOX_CONFIG_WHO - bool "who" - default n - select BUSYBOX_CONFIG_FEATURE_UTMP - help - who is used to show who is logged on. - -config BUSYBOX_CONFIG_WHOAMI - bool "whoami" - default n - help - whoami is used to print the username of the current - user id (same as id -un). - -config BUSYBOX_CONFIG_YES - bool "yes" - default y - help - yes is used to repeatedly output a specific string, or - the default string `y'. - -comment "Common options for cp and mv" - depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV - -config BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS - bool " Preserve hard links" - default y - depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV - help - Allow cp and mv to preserve hard links. - -comment "Common options for ls, more and telnet" - depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET - -config BUSYBOX_CONFIG_FEATURE_AUTOWIDTH - bool " Calculate terminal & column widths" - default y - depends on BUSYBOX_CONFIG_LS || BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TELNET - help - This option allows utilities such as 'ls', 'more' and 'telnet' - to determine the width of the screen, which can allow them to - display additional text or avoid wrapping text onto the next line. - If you leave this disabled, your utilities will be especially - primitive and will be unable to determine the current screen width. - -comment "Common options for df, du, ls" - depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS - -config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE - bool " Support for human readable output (example 13k, 23M, 235G)" - default y - depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS - help - Allow df, du, and ls to have human readable output. - -comment "Common options for md5sum, sha1sum" - depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM - -config BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK - bool " Enable -c, -s and -w options" - default y - depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM - help - Enabling the -c options allows files to be checked - against pre-calculated hash values. - - -s and -w are useful options when verifying checksums. - -endmenu diff --git a/openwrt/package/busybox/config/debianutils/Config.in b/openwrt/package/busybox/config/debianutils/Config.in deleted file mode 100644 index 71f2bf38a..000000000 --- a/openwrt/package/busybox/config/debianutils/Config.in +++ /dev/null @@ -1,65 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Debian Utilities" - -config BUSYBOX_CONFIG_MKTEMP - bool "mktemp" - default y - help - mktemp is used to create unique temporary files - -config BUSYBOX_CONFIG_PIPE_PROGRESS - bool "pipe_progress" - default n - help - Display a dot to indicate pipe activity. - -config BUSYBOX_CONFIG_READLINK - bool "readlink" - default n - help - This program reads a symbolic link and returns the name - of the file it points to - -config BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW - bool " Enable canonicalization by following all symlinks (-f)" - default n - depends on BUSYBOX_CONFIG_READLINK - help - Enable the readlink option (-f). - -config BUSYBOX_CONFIG_RUN_PARTS - bool "run-parts" - default n - help - run-parts is a utility designed to run all the scripts in a directory. - - It is useful to set up a directory like cron.daily, where you need to - execute all the scripts in that directory. - - In this implementation of run-parts some features (such as report mode) - are not implemented. - - Unless you know that run-parts is used in some of your scripts - you can safely say N here. - -config BUSYBOX_CONFIG_START_STOP_DAEMON - bool "start-stop-daemon" - default n - help - start-stop-daemon is used to control the creation and - termination of system-level processes, usually the ones - started during the startup of the system. - -config BUSYBOX_CONFIG_WHICH - bool "which" - default y - help - which is used to find programs in your PATH and - print out their pathnames. - -endmenu - diff --git a/openwrt/package/busybox/config/e2fsprogs/Config.in b/openwrt/package/busybox/config/e2fsprogs/Config.in deleted file mode 100644 index e9ef3dc04..000000000 --- a/openwrt/package/busybox/config/e2fsprogs/Config.in +++ /dev/null @@ -1,67 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Ext2 FS Progs" - -config BUSYBOX_CONFIG_CHATTR - bool "chattr" - default n - help - chattr changes the file attributes on a second extended file system. - -config BUSYBOX_CONFIG_E2FSCK - bool "e2fsck" - default n - help - e2fsck is used to check Linux second extended file systems (ext2fs). - e2fsck also supports ext2 filesystems countaining a journal (ext3). - The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also - provided. - -config BUSYBOX_CONFIG_FSCK - bool "fsck" - default n - help - fsck is used to check and optionally repair one or more filesystems. - In actuality, fsck is simply a front-end for the various file system - checkers (fsck.fstype) available under Linux. - -config BUSYBOX_CONFIG_LSATTR - bool "lsattr" - default n - help - lsattr lists the file attributes on a second extended file system. - -config BUSYBOX_CONFIG_MKE2FS - bool "mke2fs" - default n - help - mke2fs is used to create an ext2/ext3 filesystem. The normal compat - symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided. - -config BUSYBOX_CONFIG_TUNE2FS - bool "tune2fs" - default n - help - tune2fs allows the system administrator to adjust various tunable - filesystem parameters on Linux ext2/ext3 filesystems. - -config BUSYBOX_CONFIG_E2LABEL - bool "e2label" - default n - depends on BUSYBOX_CONFIG_TUNE2FS - help - e2label will display or change the filesystem label on the ext2 - filesystem located on device. - -config BUSYBOX_CONFIG_FINDFS - bool "findfs" - default n - depends on BUSYBOX_CONFIG_TUNE2FS - help - findfs will search the disks in the system looking for a filesystem - which has a label matching label or a UUID equal to uuid. - -endmenu diff --git a/openwrt/package/busybox/config/editors/Config.in b/openwrt/package/busybox/config/editors/Config.in deleted file mode 100644 index 85074b333..000000000 --- a/openwrt/package/busybox/config/editors/Config.in +++ /dev/null @@ -1,123 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Editors" - -config BUSYBOX_CONFIG_AWK - bool "awk" - default y - help - Awk is used as a pattern scanning and processing language. This is - the BusyBox implementation of that programming language. - -config BUSYBOX_CONFIG_FEATURE_AWK_MATH - bool " Enable math functions (requires libm)" - default y - depends on BUSYBOX_CONFIG_AWK - help - Enable math functions of the Awk programming language. - NOTE: This will require libm to be present for linking. - -config BUSYBOX_CONFIG_PATCH - bool "patch" - default n - help - Apply a unified diff formatted patch. - -config BUSYBOX_CONFIG_SED - bool "sed" - default y - help - sed is used to perform text transformations on a file - or input from a pipeline. - -config BUSYBOX_CONFIG_VI - bool "vi" - default y - help - 'vi' is a text editor. More specifically, it is the One True - text editor <grin>. It does, however, have a rather steep - learning curve. If you are not already comfortable with 'vi' - you may wish to use something else. - -config BUSYBOX_CONFIG_FEATURE_VI_COLON - bool " Enable \":\" colon commands (no \"ex\" mode)" - default y - depends on BUSYBOX_CONFIG_VI - help - Enable a limited set of colon commands for vi. This does not - provide an "ex" mode. - -config BUSYBOX_CONFIG_FEATURE_VI_YANKMARK - bool " Enable yank/put commands and mark cmds" - default y - depends on BUSYBOX_CONFIG_VI - help - This will enable you to use yank and put, as well as mark in - busybox vi. - -config BUSYBOX_CONFIG_FEATURE_VI_SEARCH - bool " Enable search and replace cmds" - default y - depends on BUSYBOX_CONFIG_VI - help - Select this if you wish to be able to do search and replace in - busybox vi. - -config BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS - bool " Catch signals" - default y - depends on BUSYBOX_CONFIG_VI - help - Selecting this option will make busybox vi signal aware. This will - make busybox vi support SIGWINCH to deal with Window Changes, catch - Ctrl-Z and Ctrl-C and alarms. - -config BUSYBOX_CONFIG_FEATURE_VI_DOT_CMD - bool " Remember previous cmd and \".\" cmd" - default y - depends on BUSYBOX_CONFIG_VI - help - Make busybox vi remember the last command and be able to repeat it. - -config BUSYBOX_CONFIG_FEATURE_VI_READONLY - bool " Enable -R option and \"view\" mode" - default y - depends on BUSYBOX_CONFIG_VI - help - Enable the read-only command line option, which allows the user to - open a file in read-only mode. - -config BUSYBOX_CONFIG_FEATURE_VI_SETOPTS - bool " Enable set-able options, ai ic showmatch" - default y - depends on BUSYBOX_CONFIG_VI - help - Enable the editor to set some (ai, ic, showmatch) options. - -config BUSYBOX_CONFIG_FEATURE_VI_SET - bool " Support for :set" - default y - depends on BUSYBOX_CONFIG_VI - help - Support for ":set". - -config BUSYBOX_CONFIG_FEATURE_VI_WIN_RESIZE - bool " Handle window resize" - default y - depends on BUSYBOX_CONFIG_VI - help - Make busybox vi behave nicely with terminals that get resized. - -config BUSYBOX_CONFIG_FEATURE_VI_OPTIMIZE_CURSOR - bool " Optimize cursor movement" - default y - depends on BUSYBOX_CONFIG_VI - help - This will make the cursor movement faster, but requires more memory - and it makes the applet a tiny bit larger. - -endmenu - diff --git a/openwrt/package/busybox/config/findutils/Config.in b/openwrt/package/busybox/config/findutils/Config.in deleted file mode 100644 index 9667bfba8..000000000 --- a/openwrt/package/busybox/config/findutils/Config.in +++ /dev/null @@ -1,149 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Finding Utilities" - -config BUSYBOX_CONFIG_FIND - bool "find" - default y - help - find is used to search your system to find specified files. - -config BUSYBOX_CONFIG_FEATURE_FIND_MTIME - bool " Enable modified time matching (-mtime) option" - default n - depends on BUSYBOX_CONFIG_FIND - help - Allow searching based on the modification time of - files, in days. - -config BUSYBOX_CONFIG_FEATURE_FIND_MMIN - bool " Enable modified time matching (-min) option" - default n - depends on BUSYBOX_CONFIG_FIND - help - Allow searching based on the modification time of - files, in minutes. - -config BUSYBOX_CONFIG_FEATURE_FIND_PERM - bool " Enable permissions matching (-perm) option" - default y - depends on BUSYBOX_CONFIG_FIND - help - Enable searching based on file permissions. - -config BUSYBOX_CONFIG_FEATURE_FIND_TYPE - bool " Enable filetype matching (-type) option" - default y - depends on BUSYBOX_CONFIG_FIND - help - Enable searching based on file type (file, - directory, socket, device, etc.). - -config BUSYBOX_CONFIG_FEATURE_FIND_XDEV - bool " Enable stay in filesystem (-xdev) option" - default y - depends on BUSYBOX_CONFIG_FIND - help - This option will allow find to restrict searches to a single - filesystem. - -config BUSYBOX_CONFIG_FEATURE_FIND_NEWER - bool " Enable -newer option for comparing file mtimes" - default n - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -newer' option for finding any files which have - a modified time that is more recent than the specified FILE. - -config BUSYBOX_CONFIG_FEATURE_FIND_INUM - bool " Enable inode number matching (-inum) option" - default n - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -inum' option for searching by inode number. - -config BUSYBOX_CONFIG_FEATURE_FIND_EXEC - bool " Enable (-exec) option allowing execution of commands" - default y - depends on BUSYBOX_CONFIG_FIND - help - Support the 'find -exec' option for executing commands based upon - the files matched. - -config BUSYBOX_CONFIG_GREP - bool "grep" - default y - help - grep is used to search files for a specified pattern. - -config BUSYBOX_CONFIG_FEATURE_GREP_EGREP_ALIAS - bool " Support extended regular expressions (egrep & grep -E)" - default y - depends on BUSYBOX_CONFIG_GREP - help - Enabled support for extended regular expressions. Extended - regular expressions allow for alternation (foo|bar), grouping, - and various repetition operators. - -config BUSYBOX_CONFIG_FEATURE_GREP_FGREP_ALIAS - bool " Alias fgrep to grep -F" - default y - depends on BUSYBOX_CONFIG_GREP - help - fgrep sees the search pattern as a normal string rather than - regular expressions. - grep -F is always builtin, this just creates the fgrep alias. - -config BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT - bool " Enable before and after context flags (-A, -B and -C)" - default y - depends on BUSYBOX_CONFIG_GREP - help - Print the specified number of leading (-B) and/or trailing (-A) - context surrounding our matching lines. - Print the specified number of context lines (-C). - -config BUSYBOX_CONFIG_XARGS - bool "xargs" - default y - help - xargs is used to execute a specified command on - every item from standard input. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION - bool " Enable prompt and confirmation option -p" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Support prompt the user about whether to run each command - line and read a line from the terminal. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_QUOTES - bool " Enable support single and double quotes and backslash" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Default xargs unsupport single and double quotes - and backslash for can use aruments with spaces. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT - bool " Enable support options -x" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Enable support exit if the size (see the -s or -n option) - is exceeded. - -config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM - bool " Enable options -0" - default y - depends on BUSYBOX_CONFIG_XARGS - help - Enable input filenames are terminated by a null character - instead of by whitespace, and the quotes and backslash - are not special. - -endmenu diff --git a/openwrt/package/busybox/config/init/Config.in b/openwrt/package/busybox/config/init/Config.in deleted file mode 100644 index 88dcaca2d..000000000 --- a/openwrt/package/busybox/config/init/Config.in +++ /dev/null @@ -1,80 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Init Utilities" - -config BUSYBOX_CONFIG_INIT - bool "init" - default y - help - init is the first program run when the system boots. - -config BUSYBOX_CONFIG_FEATURE_USE_INITTAB - bool " Support reading an inittab file" - default y - depends on BUSYBOX_CONFIG_INIT - help - Allow init to read an inittab file when the system boot. - -config BUSYBOX_CONFIG_FEATURE_INIT_SCTTY - bool " Support running commands with a controlling-tty" - default n - depends on BUSYBOX_CONFIG_INIT - help - If this option is enabled a command starting with hyphen (-) - is run in its own session (setsid(2)) and possibly with a - controlling tty (TIOCSCTTY). This is not the traditional init - behavour, but is often what you want in an embedded system where - the console is only accessed during development or for maintenance. - -config BUSYBOX_CONFIG_FEATURE_EXTRA_QUIET - bool " Be _extra_ quiet on boot" - default n - depends on BUSYBOX_CONFIG_INIT - help - Prevent init from logging some messages to the console during boot. - -config BUSYBOX_CONFIG_FEATURE_INIT_COREDUMPS - bool " Support dumping core for child processes (debugging only)" - default n - depends on BUSYBOX_CONFIG_INIT - help - If this option is enabled and the file /.init_enable_core - exists, then init will call setrlimit() to allow unlimited - core file sizes. If this option is disabled, processes - will not generate any core files. - - - -config BUSYBOX_CONFIG_FEATURE_INITRD - bool " Support running init from within an initrd (not initramfs)" - default n - depends on BUSYBOX_CONFIG_INIT - help - Legacy support for running init under the old-style initrd. Allows - the name linuxrc to act as init, and it doesn't assume init is PID 1. - - This does not apply to initramfs, which runs /init as PID 1 and - requires no special support. - -config BUSYBOX_CONFIG_HALT - bool "poweroff, halt, and reboot" - default y - help - Stop all processes and either halt, reboot, or power off the system. - -config BUSYBOX_CONFIG_MESG - bool "mesg" - default y - help - Mesg controls access to your terminal by others. It is typically - used to allow or disallow other users to write to your terminal - - default y - help - Stop all processes and (try to) power off the system. - -endmenu - diff --git a/openwrt/package/busybox/config/libbb/Config.in b/openwrt/package/busybox/config/libbb/Config.in deleted file mode 100644 index 7d84a7596..000000000 --- a/openwrt/package/busybox/config/libbb/Config.in +++ /dev/null @@ -1,22 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Busybox Library Tuning" - -config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED - int " MD5: Trade Bytes for Speed" - default 2 - range 0 3 - help - Trade binary size versus speed for the md5sum algorithm. - Approximate values running uClibc and hashing - linux-2.4.4.tar.bz2 were: - user times (sec) text size (386) - 0 (fastest) 1.1 6144 - 1 1.4 5392 - 2 3.0 5088 - 3 (smallest) 5.1 4912 - -endmenu diff --git a/openwrt/package/busybox/config/loginutils/Config.in b/openwrt/package/busybox/config/loginutils/Config.in deleted file mode 100644 index 621d57643..000000000 --- a/openwrt/package/busybox/config/loginutils/Config.in +++ /dev/null @@ -1,163 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Login/Password Management Utilities" - -config BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS - bool "Support for shadow passwords" - default n - help - Build support for shadow password in /etc/shadow. This file is only - readable by root and thus the encrypted passwords are no longer - publicly readable. - -config BUSYBOX_CONFIG_USE_BB_SHADOW - bool #" Use busybox shadow password functions" - default n - depends on BUSYBOX_CONFIG_USE_BB_PWD_GRP && BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS - help - If you leave this disabled, busybox will use the system's shadow - password handling functions. And if you are using the GNU C library - (glibc), you will then need to install the /etc/nsswitch.conf - configuration file and the required /lib/libnss_* libraries in - order for the shadow password functions to work. This generally - makes your embedded system quite a bit larger. - - Enabling this option will cause busybox to directly access the - system's /etc/shadow file when handling shadow passwords. This - makes your system smaller and I will get fewer emails asking about - how glibc NSS works). When this option is enabled, you will not be - able to use PAM to access shadow passwords from remote LDAP - password servers and whatnot. - -config BUSYBOX_CONFIG_USE_BB_PWD_GRP - bool "Use internal password and group functions rather than system functions" - default n - help - If you leave this disabled, busybox will use the system's password - and group functions. And if you are using the GNU C library - (glibc), you will then need to install the /etc/nsswitch.conf - configuration file and the required /lib/libnss_* libraries in - order for the password and group functions to work. This generally - makes your embedded system quite a bit larger. - - Enabling this option will cause busybox to directly access the - system's /etc/password, /etc/group files (and your system will be - smaller, and I will get fewer emails asking about how glibc NSS - works). When this option is enabled, you will not be able to use - PAM to access remote LDAP password servers and whatnot. And if you - want hostname resolution to work with glibc, you still need the - /lib/libnss_* libraries. - - If you enable this option, it will add about 1.5k to busybox. - -config BUSYBOX_CONFIG_ADDGROUP - bool "addgroup" - default n - help - Utility for creating a new group account. - -config BUSYBOX_CONFIG_DELGROUP - bool "delgroup" - default n - help - Utility for deleting a group account. - -config BUSYBOX_CONFIG_ADDUSER - bool "adduser" - default n - help - Utility for creating a new user account. - -config BUSYBOX_CONFIG_DELUSER - bool "deluser" - default n - help - Utility for deleting a user account. - -config BUSYBOX_CONFIG_GETTY - bool "getty" - default n - help - getty lets you log in on a tty, it is normally invoked by init. - -config BUSYBOX_CONFIG_FEATURE_UTMP - bool " Support utmp file" - depends on BUSYBOX_CONFIG_GETTY || BUSYBOX_CONFIG_LOGIN || BUSYBOX_CONFIG_SU || BUSYBOX_CONFIG_WHO - default n - help - The file /var/run/utmp is used to track who is currently logged in. - -config BUSYBOX_CONFIG_FEATURE_WTMP - bool " Support wtmp file" - depends on BUSYBOX_CONFIG_GETTY || BUSYBOX_CONFIG_LOGIN || BUSYBOX_CONFIG_SU || BUSYBOX_CONFIG_LAST - default n - select BUSYBOX_CONFIG_FEATURE_UTMP - help - The file /var/run/wtmp is used to track when user's have logged into - and logged out of the system. - -config BUSYBOX_CONFIG_LOGIN - bool "login" - default n - select BUSYBOX_CONFIG_FEATURE_SUID - help - login is used when signing onto a system. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_FEATURE_SECURETTY - bool " Support for /etc/securetty" - default n - depends on BUSYBOX_CONFIG_LOGIN - help - The file /etc/securetty is used by (some versions of) login(1). - The file contains the device names of tty lines (one per line, - without leading /dev/) on which root is allowed to login. - -config BUSYBOX_CONFIG_PASSWD - bool "passwd" - default y - select BUSYBOX_CONFIG_FEATURE_SUID - help - passwd changes passwords for user and group accounts. A normal user - may only change the password for his/her own account, the super user - may change the password for any account. The administrator of a group - may change the password for the group. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_SU - bool "su" - default n - select BUSYBOX_CONFIG_FEATURE_SUID - help - su is used to become another user during a login session. - Invoked without a username, su defaults to becoming the super user. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_SULOGIN - bool "sulogin" - default n - help - sulogin is invoked when the system goes into single user - mode (this is done through an entry in inittab). - -config BUSYBOX_CONFIG_VLOCK - bool "vlock" - default n - select BUSYBOX_CONFIG_FEATURE_SUID - help - Build the "vlock" applet which allows you to lock (virtual) terminals. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -endmenu - diff --git a/openwrt/package/busybox/config/miscutils/Config.in b/openwrt/package/busybox/config/miscutils/Config.in deleted file mode 100644 index 404170188..000000000 --- a/openwrt/package/busybox/config/miscutils/Config.in +++ /dev/null @@ -1,312 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Miscellaneous Utilities" - -config BUSYBOX_CONFIG_ADJTIMEX - bool "adjtimex" - default n - help - Adjtimex reads and optionally sets adjustment parameters for - the Linux clock adjustment algorithm. - -config BUSYBOX_CONFIG_BBCONFIG - bool "bbconfig" - default n - help - The bbconfig applet will print the config file with which - busybox was built. - -config BUSYBOX_CONFIG_CROND - bool "crond" - default y - select BUSYBOX_CONFIG_FEATURE_SUID - help - Crond is a background daemon that parses individual crontab - files and executes commands on behalf of the users in question. - This is a port of dcron from slackware. It uses files of the - format /var/spool/cron/crontabs/<username> files, for example: - $ cat /var/spool/cron/crontabs/root - # Run daily cron jobs at 4:40 every day: - 40 4 * * * /etc/cron/daily > /dev/null 2>&1 - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL - bool " Using /usr/sbin/sendmail?" - default n - depends on BUSYBOX_CONFIG_CROND - help - Support calling /usr/sbin/sendmail for send cmd outputs. - -config BUSYBOX_CONFIG_CRONTAB - bool "crontab" - default y - select BUSYBOX_CONFIG_FEATURE_SUID - help - Crontab manipulates the crontab for a particular user. Only - the superuser may specify a different user and/or crontab directory. - -config BUSYBOX_CONFIG_DC - bool "dc" - default n - help - Dc is a reverse-polish desk calculator which supports unlimited - precision arithmetic. - -config BUSYBOX_CONFIG_DEVFSD - bool "devfsd" - default n - help - Provides compatibility with old device names on a devfs systems. - You should set it to true if you have devfs enabled. - The following keywords in devsfd.conf are supported: - "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE", - "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", - "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". - - But only if they are written UPPERCASE!!!!!!!! - -config BUSYBOX_CONFIG_DEVFSD_MODLOAD - bool "Adds support for MODLOAD keyword in devsfd.conf" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - This actually doesn't work with busybox modutils but needs the real modutils. - -config BUSYBOX_CONFIG_DEVFSD_FG_NP - bool "Enables the -fg and -np options" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - -fg Run the daemon in the foreground. - -np Exit after parsing the configuration file. Do not poll for events. - -config BUSYBOX_CONFIG_DEVFSD_VERBOSE - bool "Increases logging (and size)" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - Increases logging to stderr or syslog. - -config BUSYBOX_CONFIG_EJECT - bool "eject" - default n - help - Used to eject cdroms. (defaults to /dev/cdrom) - -config BUSYBOX_CONFIG_LAST - bool "last" - default n - select BUSYBOX_CONFIG_FEATURE_WTMP - help - 'last' displays a list of the last users that logged into the system. - -config BUSYBOX_CONFIG_LESS - bool "less" - default n - help - 'less' is a pager, meaning that it displays text files. It possesses - a wide array of features, and is an improvement over 'more'. - -config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS - bool " Enable bracket searching" - default n - depends on BUSYBOX_CONFIG_LESS - help - This option adds the capability to search for matching left and right - brackets, facilitating programming. - -config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS - bool " Enable extra flags" - default n - depends on BUSYBOX_CONFIG_LESS - help - The extra flags provided do the following: - - The -M flag enables a more sophisticated status line. - The -m flag enables a simpler status line with a percentage. - -config BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS - bool " Enable flag changes" - default n - depends on BUSYBOX_CONFIG_LESS - help - This enables the ability to change command-line flags within - less itself. - -config BUSYBOX_CONFIG_FEATURE_LESS_MARKS - bool " Enable marks" - default n - depends on BUSYBOX_CONFIG_LESS - help - Marks enable positions in a file to be stored for easy reference. - -config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP - bool " Enable regular expressions" - default n - depends on BUSYBOX_CONFIG_LESS - help - Enable regular expressions, allowing complex file searches. - -config BUSYBOX_CONFIG_HDPARM - bool "hdparm" - default n - help - Get/Set hard drive parameters. Primarily intended for ATA - drives. Adds about 13k (or around 30k if you enable the - BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY option).... - -config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY - bool " Support obtaining detailed information directly from drives" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the -I and -Istdin options to obtain detailed information - directly from drives about their capabilities and supported ATA - feature set. Enabling this option will add about 16k... - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF - bool " Register an IDE interface (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -R' option to register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF - bool " Un-register an IDE interface (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -U' option to un-register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET - bool " perform device reset (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -w' option to perform a device reset. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF - bool " tristate device for hotswap (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -x' option to tristate device for hotswap, - and the '-b' option to get/set bus state. This is dangerous - stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA - bool " get/set using_dma flag (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -d' option to get/set using_dma flag. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_LOCK - bool "lock" - default y - help - Small utility for using locks in scripts - -config BUSYBOX_CONFIG_MAKEDEVS - bool "makedevs" - default n - help - 'makedevs' is a utility used to create a batch of devices with - one command. - . - There are two choices for command line behaviour, the interface - as used by LEAF/Linux Router Project, or a device table file. - . - 'leaf' is traditionally what busybox follows, it allows multiple - devices of a particluar type to be created per command. - e.g. /dev/hda[0-9] - Device properties are passed as command line arguments. - . - 'table' reads device properties from a file or stdin, allowing - a batch of unrelated devices to be makde with one command. - User/group names are allowed as an alternative to uid/gid. - -choice - prompt "Choose makedevs behaviour" - depends BUSYBOX_CONFIG_MAKEDEVS - default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE - -config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF - bool "leaf" - -config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE - bool "table" - -endchoice - -config BUSYBOX_CONFIG_MOUNTPOINT - bool "mountpoint" - default n - help - mountpoint checks if the directory is a mountpoint. - -config BUSYBOX_CONFIG_MT - bool "mt" - default n - help - mt is used to control tape devices. You can use the mt utility - to advance or rewind a tape past a specified number of archive - files on the tape. - -config BUSYBOX_CONFIG_RUNLEVEL - bool "runlevel" - default n - help - find the current and previous system runlevel. - - This applet uses utmp but does not rely on busybox supporing - utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc. - -config BUSYBOX_CONFIG_RX - bool "rx" - default n - help - Receive files using the Xmodem protocol. - -config BUSYBOX_CONFIG_STRINGS - bool "strings" - default y - help - strings prints the printable character sequences for each file - specified. - -config BUSYBOX_CONFIG_SETSID - bool "setsid" - default n - help - setsid runs a program in a new session - -config BUSYBOX_CONFIG_TIME - bool "time" - default y - help - The time command runs the specified program with the given arguments. - When the command finishes, time writes a message to standard output - giving timing statistics about this program run. - -config BUSYBOX_CONFIG_WATCHDOG - bool "watchdog" - default y - help - The watchdog utility is used with hardware or software watchdog - device drivers. It opens the specified watchdog device special file - and periodically writes a magic character to the device. If the - watchdog applet ever fails to write the magic character within a - certain amount of time, the watchdog device assumes the system has - hung, and will cause the hardware to reboot. - -endmenu - diff --git a/openwrt/package/busybox/config/modutils/Config.in b/openwrt/package/busybox/config/modutils/Config.in deleted file mode 100644 index 7c9f50f16..000000000 --- a/openwrt/package/busybox/config/modutils/Config.in +++ /dev/null @@ -1,147 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Module Utilities" - -config BUSYBOX_CONFIG_INSMOD - bool "insmod" - default y - help - insmod is used to load specified modules in the running kernel. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_VERSION_CHECKING - bool "Module version checking" - default n - depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES - help - Support checking of versions for modules. This is used to - ensure that the kernel and module are made for each other. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS - bool "Add module symbols to kernel symbol table" - default n - depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES - help - By adding module symbols to the kernel symbol table, Oops messages - occuring within kernel modules can be properly debugged. By enabling - this feature, module symbols will always be added to the kernel symbol - table for properly debugging support. If you are not interested in - Oops messages from kernel modules, say N. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_LOADINKMEM - bool "In kernel memory optimization (uClinux only)" - default n - depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES - help - This is a special uClinux only memory optimization that lets insmod - load the specified kernel module directly into kernel space, reducing - memory usage by preventing the need for two copies of the module - being loaded into memory. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP - bool "Enable load map (-m) option" - default n - depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES - help - Enabling this, one would be able to get a load map - output on stdout. This makes kernel module debugging - easier. - If you don't plan to debug kernel modules, you - don't need this option. - -config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL - bool "Symbols in load map" - default n - depends on BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP - help - Without this option, -m will only output section - load map. With this option, -m will also output - symbols load map. - -config BUSYBOX_CONFIG_RMMOD - bool "rmmod" - default y - help - rmmod is used to unload specified modules from the kernel. - -config BUSYBOX_CONFIG_LSMOD - bool "lsmod" - default y - help - lsmod is used to display a list of loaded modules. - -config BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT - bool "lsmod pretty output for 2.6.x Linux kernels " - default n - depends on BUSYBOX_CONFIG_LSMOD - help - This option makes output format of lsmod adjusted to - the format of module-init-tools for Linux kernel 2.6. - -config BUSYBOX_CONFIG_MODPROBE - bool "modprobe" - default n - help - Handle the loading of modules, and their dependancies on a high - level. - - Note that in the state, modprobe does not understand multiple - module options from the configuration file. See option below. - -config BUSYBOX_CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS - bool "Multiple options parsing" - default n - depends on BUSYBOX_CONFIG_MODPROBE - help - Allow modprobe to understand more than one option to pass to - modules. - - This is a WIP, while waiting for a common argument parsing - common amongst all BB applets (shell, modprobe, etc...) and - adds around 600 bytes on x86, 700 bytes on ARM. The code is - biggish and uggly, but just works. - - Saying Y here is not a bad idea if you're not that short - on storage capacity. - -comment "Options common to multiple modutils" - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_LSMOD - -config BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE - # Simulate indentation - bool " Support tainted module checking with new kernels" - default n - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_LSMOD - help - Support checking for tainted modules. These are usually binary - only modules that will make the linux-kernel list ignore your - support request. - This option is required to support GPLONLY modules. - -config BUSYBOX_CONFIG_FEATURE_2_4_MODULES - # Simulate indentation - bool " Support version 2.2.x to 2.4.x Linux kernels" - default y - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD - help - Support module loading for 2.2.x and 2.4.x Linux kernels. - -config BUSYBOX_CONFIG_FEATURE_2_6_MODULES - # Simulate indentation - bool " Support version 2.6.x Linux kernels" - default y - depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE - help - Support module loading for newer 2.6.x Linux kernels. - - -config BUSYBOX_CONFIG_FEATURE_QUERY_MODULE_INTERFACE - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_2_4_MODULES && !CONFIG_FEATURE_2_6_MODULES - - -endmenu - diff --git a/openwrt/package/busybox/config/networking/Config.in b/openwrt/package/busybox/config/networking/Config.in deleted file mode 100644 index 7e280b76e..000000000 --- a/openwrt/package/busybox/config/networking/Config.in +++ /dev/null @@ -1,711 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Networking Utilities" - -config BUSYBOX_CONFIG_FEATURE_IPV6 - bool "Enable IPv6 support" - default y - help - Enable IPv6 support to busybox. This makes applets that talk IP - able to work with IPv6. - -config BUSYBOX_CONFIG_ARPING - bool "arping" - default y - help - Ping hosts by ARP packets - -config BUSYBOX_CONFIG_DNSD - bool "dnsd" - default n - help - Small and static DNS server deamon. - -config BUSYBOX_CONFIG_ETHER_WAKE - bool "ether-wake" - default n - help - Send a magic packet to wake up sleeping machines. - -config BUSYBOX_CONFIG_FAKEIDENTD - bool "fakeidentd" - default n - help - fakeidentd listens to the ident port and returns a set fake - value whatever it gets. - -config BUSYBOX_CONFIG_FTPGET - bool "ftpget" - default n - help - Retrieve a remote file via FTP. - -config BUSYBOX_CONFIG_FTPPUT - bool "ftpput" - default n - help - Store a remote file via FTP. - -config BUSYBOX_CONFIG_HOSTNAME - bool "hostname" - default n - help - Show or set the system's host name - -config BUSYBOX_CONFIG_HTTPD - bool "httpd" - default y - help - Serve web pages via an HTTP server. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY - bool " Support using httpd only from inetd" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option disables uid and port options for the httpd applet - but requires inetd server daemon. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - bool " Enable Basic http Authentication" - default y - depends on BUSYBOX_CONFIG_HTTPD - help - Utilizes password settings from /etc/httpd.conf for basic - authentication on a per url basis. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 - bool " Support MD5 crypted passwords for http Authentication" - default y - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - help - Enables basic per url authentication from /etc/httpd.conf - using md5 passwords. - -if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY -config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP - bool " Support reloading the global config file using hup signal" - default y - depends on BUSYBOX_CONFIG_HTTPD - help - This option enables processing of SIGHUP to reload cached - configuration settings. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID - bool " Enable support -u <user> option" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows the server to run as a specific user - rather than defaulting to the user that starts the server. - Use of this option requires special privileges to change to a - different user. -endif - -config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES - bool " Support loading additional MIME types at run-time" - default y - depends on BUSYBOX_CONFIG_HTTPD - help - This option enables support for additional MIME types at - run-time to be specified in the configuration file. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - bool " Support Common Gateway Interface (CGI)" - default y - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows scripts and executables to be invoked - when specific urls are requested. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool " Enable support for running scripts through an interpreter" - default n - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - help - This option enables support for running scripts through an - interpreter. Turn this on, if you want PHP scripts to work - properly. You need to supply an addition line in your httpd - config file: - *.php:/path/to/your/php - -config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV - bool " Support the REMOTE_PORT environment variable for CGI" - default y - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - help - Use of this option can assist scripts in generating - references that contain a unique port number. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR - bool " Enable the -e option for shell script CGI simplification." - default y - depends on BUSYBOX_CONFIG_HTTPD - help - After set, this option allows html encoding arbitrary - strings for display of the browser. Output goes to stdout. - For example, httpd -e "<Hello World>" as - "<Hello World>". - -config BUSYBOX_CONFIG_IFCONFIG - bool "ifconfig" - default y - help - Ifconfig is used to configure the kernel-resident network interfaces. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS - bool " Enable status reporting output (+7k)" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - If ifconfig is called with no arguments it will display the status - of the currently active interfaces. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP - bool " Enable slip-specific options \"keepalive\" and \"outfill\"" - default n - depends on BUSYBOX_CONFIG_IFCONFIG - help - Allow "keepalive" and "outfill" support for SLIP. If you're not - planning on using serial lines, leave this unchecked. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ - bool " Enable options \"mem_start\", \"io_addr\", and \"irq\"" - default n - depends on BUSYBOX_CONFIG_IFCONFIG - help - Allow the start address for shared memory, start address for I/O, - and/or the interrupt line used by the specified device. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW - bool " Enable option \"hw\" (ether only)" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' - class. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS - bool " Set the broadcast automatically" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - Setting this will make ifconfig attempt to find the broadcast - automatically if the value '+' is used. - -config BUSYBOX_CONFIG_IFUPDOWN - bool "ifupdown" - default n - select BUSYBOX_CONFIG_RUN_PARTS - help - Activate or deactivate the specified interfaces. This applet makes - use of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want - to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable - BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options. Of - course you could use non-busybox versions of these programs, so - against my better judgement (since this will surely result in plenty - of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either - "ifconfig" and "route" or the "ip" command, either via busybox or via - standalone utilities. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - bool " Use ip applet" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - Use the iproute "ip" command to implement "ifup" and "ifdown", rather - than the default of using the older 'ifconfig' and 'route' utilities. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN - bool " Use busybox ip applet" - default n - depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_IP - select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - select BUSYBOX_CONFIG_FEATURE_IP_LINK - select BUSYBOX_CONFIG_FEATURE_IP_ROUTE - help - Use the busybox iproute "ip" applet to implement "ifupdown". - - If leave this disabled, you must install the full-blown iproute2 - utility or the "ifup" and "ifdown" applets will not work. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN - bool " Use busybox ifconfig and route applets" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_IFCONFIG - select BUSYBOX_CONFIG_ROUTE - help - Use the busybox iproute "ifconfig" and "route" applets to - implement the "ifup" and "ifdown" utilities. - - If leave this disabled, you must install the full-blown ifconfig - and route utilities, or the "ifup" and "ifdown" applets will not - work. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 - bool " Enable support for IPv4" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - If you want busybox to talk IPv4, leave this on. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 - bool " Enable support for IPv6" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - If you need support for IPv6, turn this option on. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX - bool " Enable support for IPX" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - If this option is selected you can use busybox to work with IPX - networks. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING - bool " Enable mapping support" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - This enables support for the "mapping" stanza, unless you have - a weird network setup you don't need it. - -config BUSYBOX_CONFIG_INETD - bool "inetd" - default n - help - Internet superserver daemon - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO - bool " Support echo service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Echo received data internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD - bool " Support discard service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Internet /dev/null internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME - bool " Support time service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Return 32 bit time since 1900 internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME - bool " Support daytime service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Return human-readable time internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN - bool " Support chargen service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Familiar character generator internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_RPC - bool " Support RPC services" - default n - depends on BUSYBOX_CONFIG_INETD - help - Suuport Sun-RPC based services - - -config BUSYBOX_CONFIG_IP - bool "ip" - default n - help - The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with - TCP/IP. - -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPADDR - config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - default n - comment " address (forced enabled for ipaddr)" -endif -if ! (CONFIG_IP && BUSYBOX_CONFIG_IPADDR) - config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - bool " address" - default n - depends on BUSYBOX_CONFIG_IP - help - Address manipulation support for the "ip" applet. -endif - -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPLINK - config BUSYBOX_CONFIG_FEATURE_IP_LINK - default n - comment " link (forced enabled for iplink)" -endif -if !(CONFIG_IP && BUSYBOX_CONFIG_IPLINK) - config BUSYBOX_CONFIG_FEATURE_IP_LINK - bool " link" - default n - depends on BUSYBOX_CONFIG_IP - help - Configure network devices with "ip". -endif - -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPROUTE - config BUSYBOX_CONFIG_FEATURE_IP_ROUTE - default n - comment " route (forced enabled for iproute)" -endif -if !(CONFIG_IP && BUSYBOX_CONFIG_IPROUTE) - config BUSYBOX_CONFIG_FEATURE_IP_ROUTE - bool " route" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for routing table management to "ip". -endif - -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL - config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - default n - comment " tunnel (forced enabled for iptunnel)" -endif -if !(CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL) - config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - bool " tunnel" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for tunneling commands to "ip". -endif - -config BUSYBOX_CONFIG_IPCALC - bool "ipcalc" - default n - help - ipcalc takes an IP address and netmask and calculates the - resulting broadcast, network, and host range. - -config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY - bool " Fancy IPCALC, more options, adds 1 kbyte" - default n - depends on BUSYBOX_CONFIG_IPCALC - help - Adds the options hostname, prefix and silent to the output of "ipcalc". - -config BUSYBOX_CONFIG_IPADDR - bool "ipaddr" - default n - help - Equivalent to selecting address support to "ip", above. - -config BUSYBOX_CONFIG_IPLINK - bool "iplink" - default n - help - Equivalent to selecting link support to "ip", above. - -config BUSYBOX_CONFIG_IPROUTE - bool "iproute" - default n - help - Equivalent to selecting route support to "ip", above. - -config BUSYBOX_CONFIG_IPTUNNEL - bool "iptunnel" - default n - help - Equivalent to selecting tunnel support to "ip", above. - -config BUSYBOX_CONFIG_NAMEIF - bool "nameif" - default n - help - nameif is used to rename network interface by its MAC address. - Renamed interfaces MUST be in the down state. - It is possible to use a file (default: /etc/mactab) - with list of new interface names and MACs. - Maximum interface name length: IF_NAMESIZE = 16 - File fields are separated by space or tab. - File format: - # Comment - new_interface_name XX:XX:XX:XX:XX:XX - -config BUSYBOX_CONFIG_NC - bool "nc" - default y - help - A simple Unix utility which reads and writes data across network - connections. - -config BUSYBOX_CONFIG_NETMSG - bool "netmsg" - default y - help - simple program for sending udp broadcast messages - -config BUSYBOX_CONFIG_NC_GAPING_SECURITY_HOLE - bool "gaping security hole" - default n - depends on BUSYBOX_CONFIG_NC - help - Add support for executing a program after making or receiving a - successful connection (-e option). - -config BUSYBOX_CONFIG_NETSTAT - bool "netstat" - default y - help - netstat prints information about the Linux networking subsystem. - -config BUSYBOX_CONFIG_NSLOOKUP - bool "nslookup" - default y - help - nslookup is a tool to query Internet name servers. - -config BUSYBOX_CONFIG_PING - bool "ping" - default y - help - ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to - elicit an ICMP ECHO_RESPONSE from a host or gateway. - -config BUSYBOX_CONFIG_FEATURE_FANCY_PING - bool " Enable fancy ping output" - default y - depends on BUSYBOX_CONFIG_PING - help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. - -config BUSYBOX_CONFIG_PING6 - bool "ping6" - default y - depends on BUSYBOX_CONFIG_FEATURE_IPV6 - help - This will give you a ping that can talk IPv6. - -config BUSYBOX_CONFIG_FEATURE_FANCY_PING6 - bool " Enable fancy ping6 output" - default y - depends on BUSYBOX_CONFIG_PING6 - help - Make the output from the ping6 applet include statistics, and at the - same time provide full support for ICMP packets. - -config BUSYBOX_CONFIG_ROUTE - bool "route" - default y - help - Route displays or manipulates the kernel's IP routing tables. - -config BUSYBOX_CONFIG_TELNET - bool "telnet" - default y - help - Telnet is an interface to the TELNET protocol, but is also commonly - used to test other simple protocols. - -config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE - bool " Pass TERM type to remote host" - default y - depends on BUSYBOX_CONFIG_TELNET - help - Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that - things like ANSI colors and other control sequences behave. - -config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN - bool " Pass USER type to remote host" - default n - depends on BUSYBOX_CONFIG_TELNET - help - Setting this option will forward the USER environment variable to the - remote host you are connecting to. This is useful when you need to - log into a machine without telling the username (autologin). This - option enables `-a' and `-l USER' arguments. - -config BUSYBOX_CONFIG_TELNETD - bool "telnetd" - default y - help - A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a - more secure alternative, you should seriously consider installing the - very small Dropbear SSH daemon instead: - http://matt.ucc.asn.au/dropbear/dropbear.html - - Note that for busybox telnetd to work you need several things: - First of all, your kernel needs: - BUSYBOX_CONFIG_UNIX98_PTYS=y - BUSYBOX_CONFIG_DEVPTS_FS=y - - Next, you need a /dev/pts directory on your root filesystem: - - $ ls -ld /dev/pts - drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ - - Next you need the pseudo terminal master multiplexer /dev/ptmx: - - $ ls -la /dev/ptmx - crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx - - Any /dev/ttyp[0-9]* files you may have can be removed. - Next, you need to mount the devpts filesystem on /dev/pts using: - - mount -t devpts devpts /dev/pts - - You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and - BUSYBOX_CONFIG_FEATURE_SUID enabled. And finally, you should make - certain that Busybox has been installed setuid root: - - chown root.root /bin/busybox - chmod 4755 /bin/busybox - - with all that done, telnetd _should_ work.... - - -config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD - bool " Support call from inetd only" - default n - depends on BUSYBOX_CONFIG_TELNETD - help - Selecting this will make telnetd only callable from inetd, - removing the standalone support. - -config BUSYBOX_CONFIG_TFTP - bool "tftp" - default n - help - This enables the Trivial File Transfer Protocol client program. TFTP - is usually used for simple, small transfers such as a root image - for a network-enabled bootloader. - -config BUSYBOX_CONFIG_FEATURE_TFTP_GET - bool " Enable \"get\" command" - default n - depends on BUSYBOX_CONFIG_TFTP - help - Add support for the GET command within the TFTP client. This allows - a client to retrieve a file from a TFTP server. - -config BUSYBOX_CONFIG_FEATURE_TFTP_PUT - bool " Enable \"put\" command" - default n - depends on BUSYBOX_CONFIG_TFTP - help - Add support for the PUT command within the TFTP client. This allows - a client to transfer a file to a TFTP server. - -config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - bool " Enable \"blocksize\" command" - default n - depends on BUSYBOX_CONFIG_TFTP - help - Allow the client to specify the desired block size for transfers. - -config BUSYBOX_CONFIG_FEATURE_TFTP_DEBUG - bool " Enable debug" - default n - depends on BUSYBOX_CONFIG_TFTP - help - Enable debug settings for tftp. This is useful if you're running - into problems with tftp as the protocol doesn't help you much when - you run into problems. - -config BUSYBOX_CONFIG_TRACEROUTE - bool "traceroute" - default y - help - Utility to trace the route of IP packets - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE - bool " Enable verbose output" - default y - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add some verbosity to traceroute. This includes amongst other things - hostnames and ICMP response types. - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE - bool " Enable loose source route" - default n - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add option to specify a loose source route gateway - (8 maximum). - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP - bool " Use ICMP instead of UDP" - default n - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add feature to allow for ICMP ECHO instead of UDP datagrams. - - -config BUSYBOX_CONFIG_VCONFIG - bool "vconfig" - default y - help - Creates, removes, and configures VLAN interfaces - -config BUSYBOX_CONFIG_WGET - bool "wget" - default y - help - wget is a utility for non-interactive download of files from HTTP, - HTTPS, and FTP servers. - -config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR - bool " Enable a nifty process meter (+2k)" - default y - depends on BUSYBOX_CONFIG_WGET - help - Enable the transfer progress bar for wget transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION - bool " Enable HTTP authentication" - default y - depends on BUSYBOX_CONFIG_WGET - help - Support authenticated HTTP transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL - bool " Enable IPv6 literal addresses" - default y - depends on BUSYBOX_CONFIG_WGET - help - Support IPv6 address literal notation in URLs. - -source package/busybox/config/networking/udhcp/Config.in - -config BUSYBOX_CONFIG_ZCIP - bool "zcip" - default n - help - ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. - It's a daemon that allocates and defends a dynamically assigned - address on the 169.254/16 network, requiring no system administrator. - - See http://www.zeroconf.org for further details, and "zcip.script" - in the busybox examples. - -endmenu - diff --git a/openwrt/package/busybox/config/networking/udhcp/Config.in b/openwrt/package/busybox/config/networking/udhcp/Config.in deleted file mode 100644 index d15128ce3..000000000 --- a/openwrt/package/busybox/config/networking/udhcp/Config.in +++ /dev/null @@ -1,62 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "udhcp Server/Client" - -config BUSYBOX_CONFIG_UDHCPD - bool "udhcp Server (udhcpd)" - default n - help - uDHCPd is a DHCP server geared primarily toward embedded systems, - while striving to be fully functional and RFC compliant. - - See http://udhcp.busybox.net for further details. - -config BUSYBOX_CONFIG_UDHCPC - bool "udhcp Client (udhcpc)" - default y - help - uDHCPc is a DHCP client geared primarily toward embedded systems, - while striving to be fully functional and RFC compliant. - - The udhcp client negotiates a lease with the DHCP server and - notifies a set of scripts when a lease is obtained or lost. - - See http://udhcp.busybox.net for further details. - -config BUSYBOX_CONFIG_DUMPLEASES - bool "Lease display utility (dumpleases)" - default n - depends on BUSYBOX_CONFIG_UDHCPD - help - dumpleases displays the leases written out by the udhcpd server. - Lease times are stored in the file by time remaining in lease, or - by the absolute time that it expires in seconds from epoch. - - See http://udhcp.busybox.net for further details. - -config BUSYBOX_CONFIG_FEATURE_UDHCP_SYSLOG - bool " Log udhcp messages to syslog (instead of stdout)" - default n - depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC - help - If selected, udhcpd will log all its messages to syslog, otherwise, - it will attempt to log them to stdout. - - See http://udhcp.busybox.net for further details. - -config BUSYBOX_CONFIG_FEATURE_UDHCP_DEBUG - bool " Compile udhcp with noisy debugging messages" - default n - depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC - help - If selected, udhcpd will output extra debugging output. If using - this option, compile uDHCP with "-g", and do not fork the daemon to - the background. - - See http://udhcp.busybox.net for further details. - -endmenu - diff --git a/openwrt/package/busybox/config/procps/Config.in b/openwrt/package/busybox/config/procps/Config.in deleted file mode 100644 index b94632b46..000000000 --- a/openwrt/package/busybox/config/procps/Config.in +++ /dev/null @@ -1,121 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Process Utilities" - -config BUSYBOX_CONFIG_FREE - bool "free" - default y - help - free displays the total amount of free and used physical and swap - memory in the system, as well as the buffers used by the kernel. - The shared memory column should be ignored; it is obsolete. - -config BUSYBOX_CONFIG_FUSER - bool "fuser" - default n - help - fuser lists all PIDs (Process IDs) that currently have a given - file open. fuser can also list all PIDs that have a given network - (TCP or UDP) port open. - -config BUSYBOX_CONFIG_KILL - bool "kill" - default y - help - The command kill sends the specified signal to the specified - process or process group. If no signal is specified, the TERM - signal is sent. - -config BUSYBOX_CONFIG_KILLALL - bool "killall" - default y - depends on BUSYBOX_CONFIG_KILL - help - killall sends a signal to all processes running any of the - specified commands. If no signal name is specified, SIGTERM is - sent. - -config BUSYBOX_CONFIG_KILLALL5 - bool "killall5" - default y - depends on BUSYBOX_CONFIG_KILL - -config BUSYBOX_CONFIG_PIDOF - bool "pidof" - default y - help - Pidof finds the process id's (pids) of the named programs. It prints - those id's on the standard output. - -config BUSYBOX_CONFIG_FEATURE_PIDOF_SINGLE - bool " Enable argument for single shot (-s)" - default n - depends on BUSYBOX_CONFIG_PIDOF - help - Support argument '-s' for returning only the first pid found. - -config BUSYBOX_CONFIG_FEATURE_PIDOF_OMIT - bool " Enable argument for omitting pids (-o)" - default n - depends on BUSYBOX_CONFIG_PIDOF - help - Support argument '-o' for omitting the given pids in output. - The special pid %PPID can be used to name the parent process - of the pidof, in other words the calling shell or shell script. - -config BUSYBOX_CONFIG_PS - bool "ps" - default y - help - ps gives a snapshot of the current processes. - -config BUSYBOX_CONFIG_FEATURE_PS_WIDE - bool " Enable argument for wide output (-w)" - default n - depends on BUSYBOX_CONFIG_PS - help - Support argument 'w' for wide output. - If given once, 132 chars are printed and given more than - one, the length is unlimited. - -config BUSYBOX_CONFIG_RENICE - bool "renice" - default n - help - Renice alters the scheduling priority of one or more running - processes. - -config BUSYBOX_CONFIG_BB_SYSCTL - bool "sysctl" - default y - help - Configure kernel parameters at runtime. - -config BUSYBOX_CONFIG_TOP - bool "top" - default y - help - The top program provides a dynamic real-time view of a running - system. - -config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE - bool " Support showing CPU usage percentage (add 2k bytes)" - default y - depends on BUSYBOX_CONFIG_TOP - help - Make top display CPU usage. - -config BUSYBOX_CONFIG_UPTIME - bool "uptime" - default y - help - uptime gives a one line display of the current time, how long - the system has been running, how many users are currently logged - on, and the system load averages for the past 1, 5, and 15 minutes. - - -endmenu - diff --git a/openwrt/package/busybox/config/shell/Config.in b/openwrt/package/busybox/config/shell/Config.in deleted file mode 100644 index b9a1b4d7a..000000000 --- a/openwrt/package/busybox/config/shell/Config.in +++ /dev/null @@ -1,288 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Shells" - -choice - prompt "Choose your default shell" - default BUSYBOX_CONFIG_FEATURE_SH_IS_ASH - help - Choose a shell. The ash shell is the most bash compatible - and full featured one. - -config BUSYBOX_CONFIG_FEATURE_SH_IS_ASH - select BUSYBOX_CONFIG_ASH - bool "ash" - -config BUSYBOX_CONFIG_FEATURE_SH_IS_HUSH - select BUSYBOX_CONFIG_HUSH - bool "hush" - -config BUSYBOX_CONFIG_FEATURE_SH_IS_LASH - select BUSYBOX_CONFIG_LASH - bool "lash" - -config BUSYBOX_CONFIG_FEATURE_SH_IS_MSH - select BUSYBOX_CONFIG_MSH - bool "msh" - -config BUSYBOX_CONFIG_FEATURE_SH_IS_NONE - bool "none" - -endchoice - -config BUSYBOX_CONFIG_ASH - bool "ash" - default y - select BUSYBOX_CONFIG_TEST - help - Tha 'ash' shell adds about 60k in the default configuration and is - the most complete and most pedantically correct shell included with - busybox. This shell is actually a derivative of the Debian 'dash' - shell (by Herbert Xu), which was created by porting the 'ash' shell - (written by Kenneth Almquist) from NetBSD. - -comment "Ash Shell Options" - depends on BUSYBOX_CONFIG_ASH - -config BUSYBOX_CONFIG_ASH_JOB_CONTROL - bool " Enable Job control" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable job control in the ash shell. - -config BUSYBOX_CONFIG_ASH_READ_NCHARS - bool " Enable 'read -n N' and 'read -s' support" - default n - depends on BUSYBOX_CONFIG_ASH - help - 'read -n N' will return a value after N characters have been read. - 'read -s' will read without echoing the user's input. - -config BUSYBOX_CONFIG_ASH_READ_TIMEOUT - bool " Enable 'read -t S' support." - default y - depends on BUSYBOX_CONFIG_ASH - help - 'read -t S' will return a value after S seconds have passed. - This implementation will allow fractional seconds, expressed - as a decimal fraction, e.g. 'read -t 2.5 foo'. - -config BUSYBOX_CONFIG_ASH_ALIAS - bool " Enable alias support" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable alias support in the ash shell. - -config BUSYBOX_CONFIG_ASH_MATH_SUPPORT - bool " Enable Posix math support" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable math support in the ash shell. - -config BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64 - bool " Extend Posix math support to 64 bit" - default n - depends on BUSYBOX_CONFIG_ASH_MATH_SUPPORT - help - Enable 64-bit math support in the ash shell. This will make - the shell slightly larger, but will allow computation with very - large numbers. - -config BUSYBOX_CONFIG_ASH_GETOPTS - bool " Enable getopts builtin to parse positional parameters" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable getopts builtin in the ash shell. - -config BUSYBOX_CONFIG_ASH_CMDCMD - bool " Enable cmdcmd to override shell builtins" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable support for the ash 'command' builtin, which allows - you to run the specified command with the specified arguments, - even when there is an ash builtin command with the same name. - -config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO - bool " Enable builtin version of 'echo'" - default y - depends on BUSYBOX_CONFIG_ASH - help - Enable support for echo, built in to ash. - -# this entry also appears in coreutils/Config.in, next to the echo applet -config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO - bool " Enable echo options (-n and -e)" - default y - depends on BUSYBOX_CONFIG_ASH_BUILTIN_ECHO - help - This adds options (-n and -e) to echo. - -config BUSYBOX_CONFIG_ASH_MAIL - bool " Check for new mail on interactive shells" - default n - depends on BUSYBOX_CONFIG_ASH - help - Enable "check for new mail" in the ash shell. - -config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE - bool " Optimize for size instead of speed" - default y - depends on BUSYBOX_CONFIG_ASH - help - Compile ash for reduced size at the price of speed. - -config BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT - bool " Enable pseudorandom generator and variable $RANDOM" - default n - depends on BUSYBOX_CONFIG_ASH - help - Enable pseudorandom generator and dynamic variable "$RANDOM". - Each read of "$RANDOM" will generate a new pseudorandom value. - You can reset the generator by using a specified start value. - After "unset RANDOM" then generator will switch off and this - variable will no longer have special treatment. - -config BUSYBOX_CONFIG_ASH_EXPAND_PRMT - bool " Expand prompt string" - default n - depends on BUSYBOX_CONFIG_ASH - help - "PS#" may be contain volatile content, such as backquote commands. - This option recreates the prompt string from the environment - variable each time it is displayed. - -config BUSYBOX_CONFIG_HUSH - bool "hush" - default n - select BUSYBOX_CONFIG_TRUE - select BUSYBOX_CONFIG_FALSE - select BUSYBOX_CONFIG_TEST - help - hush is a very small shell (just 18k) and it has fairly complete - Bourne shell grammar. It even handles all the normal flow control - options such as if/then/elif/else/fi, for/in/do/done, while loops, - etc. - - It does not handle case/esac, select, function, here documents ( << - word ), arithmetic expansion, aliases, brace expansion, tilde - expansion, &> and >& redirection of stdout+stderr, etc. - - -config BUSYBOX_CONFIG_LASH - bool "lash" - default n - select BUSYBOX_CONFIG_TRUE - select BUSYBOX_CONFIG_FALSE - select BUSYBOX_CONFIG_TEST - help - lash is the very smallest shell (adds just 10k) and it is quite - usable as a command prompt, but it is not suitable for any but the - most trivial scripting (such as an initrd that calls insmod a few - times) since it does not understand any Bourne shell grammar. It - does handle pipes, redirects, and job control though. Adding in - command editing makes it a very nice lightweight command prompt. - - -config BUSYBOX_CONFIG_MSH - bool "msh" - default n - select BUSYBOX_CONFIG_TRUE - select BUSYBOX_CONFIG_FALSE - select BUSYBOX_CONFIG_TEST - help - The minix shell (adds just 30k) is quite complete and handles things - like for/do/done, case/esac and all the things you expect a Bourne - shell to do. It is not always pedantically correct about Bourne - shell grammar (try running the shell testscript "tests/sh.testcases" - on it and compare vs bash) but for most things it works quite well. - It also uses only vfork, so it can be used on uClinux systems. - -comment "Bourne Shell Options" - depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH - -config BUSYBOX_CONFIG_FEATURE_SH_EXTRA_QUIET - bool "Hide message on interactive shell startup" - default n - depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH - help - Remove the busybox introduction when starting a shell. - -config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL - bool "Standalone shell" - default n - depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH - help - This option causes the selected busybox shell to use busybox applets - in preference to executables in the PATH whenever possible. For - example, entering the command 'ifconfig' into the shell would cause - busybox to use the ifconfig busybox applet. Specifying the fully - qualified executable name, such as '/sbin/ifconfig' will still - execute the /sbin/ifconfig executable on the filesystem. This option - is generally used when creating a statically linked version of busybox - for use as a rescue shell, in the event that you screw up your system. - - Note that when using this option, the shell will attempt to directly - run '/bin/busybox'. If you do not have the busybox binary sitting in - that exact location with that exact name, this option will not work at - all. - -config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING - bool "command line editing" - default y - depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH - help - Enable command editing in shell. - -config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING_VI - bool "vi-style line editing commands" - default n - depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING - help - Enable vi-style line editing in the shell. This mode can be - turned on and off with "set -o vi" and "set +o vi". - -config BUSYBOX_CONFIG_FEATURE_COMMAND_HISTORY - int "history size" - default 15 - depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING - help - Specify command history size in shell. - -config BUSYBOX_CONFIG_FEATURE_COMMAND_SAVEHISTORY - bool "history saving" - default n - depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING - help - Enable history saving in ash shell. - -config BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION - bool "tab completion" - default y - depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING - help - Enable tab completion in shell. - -config BUSYBOX_CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION - bool "username completion" - default n - depends on BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION - help - Enable username completion in shell. - -config BUSYBOX_CONFIG_FEATURE_SH_FANCY_PROMPT - bool "Fancy shell prompts" - default y - depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING - help - Setting this option allows for prompts to use things like \w and - \$ and also using escape codes. - -endmenu diff --git a/openwrt/package/busybox/config/sysklogd/Config.in b/openwrt/package/busybox/config/sysklogd/Config.in deleted file mode 100644 index 209bdff05..000000000 --- a/openwrt/package/busybox/config/sysklogd/Config.in +++ /dev/null @@ -1,109 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "System Logging Utilities" - -config BUSYBOX_CONFIG_SYSLOGD - bool "syslogd" - default y - help - The syslogd utility is used to record logs of all the - significant events that occur on a system. Every - message that is logged records the date and time of the - event, and will generally also record the name of the - application that generated the message. When used in - conjunction with klogd, messages from the Linux kernel - can also be recorded. This is terribly useful, - especially for finding what happened when something goes - wrong. And something almost always will go wrong if - you wait long enough.... - -config BUSYBOX_CONFIG_FEATURE_ROTATE_LOGFILE - bool " Rotate message files" - default y - depends on BUSYBOX_CONFIG_SYSLOGD - help - This enables syslogd to rotate the message files - on his own. No need to use an external rotatescript. - -config BUSYBOX_CONFIG_FEATURE_REMOTE_LOG - bool " Remote Log support" - default y - depends on BUSYBOX_CONFIG_SYSLOGD - help - When you enable this feature, the syslogd utility can - be used to send system log messages to another system - connected via a network. This allows the remote - machine to log all the system messages, which can be - terribly useful for reducing the number of serial - cables you use. It can also be a very good security - measure to prevent system logs from being tampered with - by an intruder. - -config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG - bool " Circular Buffer support" - default y - depends on BUSYBOX_CONFIG_SYSLOGD - help - When you enable this feature, the syslogd utility will - use a circular buffer to record system log messages. - When the buffer is filled it will continue to overwrite - the oldest messages. This can be very useful for - systems with little or no permanent storage, since - otherwise system logs can eventually fill up your - entire filesystem, which may cause your system to - break badly. - -config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE - int " Circular buffer size in Kbytes (minimum 4KB)" - default 16 - depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG - help - This option sets the size of the circular buffer - used to record system log messages. - -config BUSYBOX_CONFIG_LOGREAD - bool " logread" - default y - depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG - help - If you enabled Circular Buffer support, you almost - certainly want to enable this feature as well. This - utility will allow you to read the messages that are - stored in the syslogd circular buffer. - -config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING - bool " logread double buffering" - default n - depends on BUSYBOX_CONFIG_LOGREAD - help - 'logread' ouput to slow serial terminals can have - side effects on syslog because of the semaphore. - This option make logread to double buffer copy - from circular buffer, minimizing semaphore - contention at some minor memory expense. - -config BUSYBOX_CONFIG_KLOGD - bool "klogd" - default y - depends on BUSYBOX_CONFIG_SYSLOGD - help - klogd is a utility which intercepts and logs all - messages from the Linux kernel and sends the messages - out to the 'syslogd' utility so they can be logged. If - you wish to record the messages produced by the kernel, - you should enable this option. - -config BUSYBOX_CONFIG_LOGGER - bool "logger" - default y - help - The logger utility allows you to send arbitrary text - messages to the system log (i.e. the 'syslogd' utility) so - they can be logged. This is generally used to help locate - problems that occur within programs and scripts. - -endmenu - diff --git a/openwrt/package/busybox/config/util-linux/Config.in b/openwrt/package/busybox/config/util-linux/Config.in deleted file mode 100644 index 474ef02f0..000000000 --- a/openwrt/package/busybox/config/util-linux/Config.in +++ /dev/null @@ -1,451 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux System Utilities" - -config BUSYBOX_CONFIG_DMESG - bool "dmesg" - default y - help - dmesg is used to examine or control the kernel ring buffer. When the - Linux kernel prints messages to the system log, they are stored in - the kernel ring buffer. You can use dmesg to print the kernel's ring - buffer, clear the kernel ring buffer, change the size of the kernel - ring buffer, and change the priority level at which kernel messages - are also logged to the system console. Enable this option if you - wish to enable the 'dmesg' utility. - -config BUSYBOX_CONFIG_FBSET - bool "fbset" - default n - help - fbset is used to show or change the settings of a Linux frame buffer - device. The frame buffer device provides a simple and unique - interface to access a graphics display. Enable this option - if you wish to enable the 'fbset' utility. - -config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY - bool " Turn on extra fbset options" - default n - depends on BUSYBOX_CONFIG_FBSET - help - This option enables extended fbset options, allowing one to set the - framebuffer size, color depth, etc. interface to access a graphics - display. Enable this option if you wish to enable extended fbset - options. - -config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE - bool " Turn on fbset readmode support" - default n - depends on BUSYBOX_CONFIG_FBSET - help - This option allows fbset to read the video mode database stored by - default n /etc/fb.modes, which can be used to set frame buffer - device to pre-defined video modes. - -config BUSYBOX_CONFIG_FDFLUSH - bool "fdflush" - default n - help - fdflush is only needed when changing media on slightly-broken - removable media drives. It is used to make Linux believe that a - hardware disk-change switch has been actuated, which causes Linux to - forget anything it has cached from the previous media. If you have - such a slightly-broken drive, you will need to run fdflush every time - you change a disk. Most people have working hardware and can safely - leave this disabled. - -config BUSYBOX_CONFIG_FDFORMAT - bool "fdformat" - default n - help - fdformat is used to low-level format a floppy disk. - -config BUSYBOX_CONFIG_FDISK - bool "fdisk" - default n - help - The fdisk utility is used to divide hard disks into one or more - logical disks, which are generally called partitions. This utility - can be used to list and edit the set of partitions or BSD style - 'disk slices' that are defined on a hard drive. - -config BUSYBOX_FDISK_SUPPORT_LARGE_DISKS - bool - default y - depends on BUSYBOX_CONFIG_FDISK - help - Enable this option to support large disks > 4GB. - -config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - bool " Write support" - default n - depends on BUSYBOX_CONFIG_FDISK - help - Enabling this option allows you to create or change a partition table - and write those changes out to disk. If you leave this option - disabled, you will only be able to view the partition table. - -config BUSYBOX_CONFIG_FEATURE_AIX_LABEL - bool " Support AIX disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change AIX disklabels. - Most people can safely leave this option disabled. - -config BUSYBOX_CONFIG_FEATURE_SGI_LABEL - bool " Support SGI disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SGI disklabels. - Most people can safely leave this option disabled. - -config BUSYBOX_CONFIG_FEATURE_SUN_LABEL - bool " Support SUN disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SUN disklabels. - Most people can safely leave this option disabled. - -config BUSYBOX_CONFIG_FEATURE_OSF_LABEL - bool " Support BSD disklabels" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change BSD disklabels - and define and edit BSD disk slices. - -config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED - bool " Support expert mode" - default n - depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to do terribly unsafe things like - define arbitrary drive geometry, move the beginning of data in a - partition, and similarly evil things. Unless you have a very good - reason you would be wise to leave this disabled. - -config BUSYBOX_CONFIG_FREERAMDISK - bool "freeramdisk" - default n - help - Linux allows you to create ramdisks. This utility allows you to - delete them and completely free all memory that was used for the - ramdisk. For example, if you boot Linux into a ramdisk and later - pivot_root, you may want to free the memory that is allocated to the - ramdisk. If you have no use for freeing memory from a ramdisk, leave - this disabled. - -config BUSYBOX_CONFIG_FSCK_MINIX - bool "fsck_minix" - default n - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. It is not a journaling filesystem however and - can experience corruption if it is not properly unmounted or if the - power goes off in the middle of a write. This utility allows you to - check for and attempt to repair any corruption that occurs to a minix - filesystem. - -config BUSYBOX_CONFIG_MKFS_MINIX - bool "mkfs_minix" - default n - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. If you wish to be able to create minix filesystems - this utility will do the job for you. - -comment "Minix filesystem support" - depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX - -config BUSYBOX_CONFIG_FEATURE_MINIX2 - bool " Support Minix fs v2 (fsck_minix/mkfs_minix)" - default n - depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX - help - If you wish to be able to create version 2 minix filesystems, enable this. - If you enabled 'mkfs_minix' then you almost certainly want to be using the - version 2 filesystem support. - -config BUSYBOX_CONFIG_GETOPT - bool "getopt" - default n - help - The getopt utility is used to break up (parse) options in command - lines to make it easy to write complex shell scripts that also check - for legal (and illegal) options. If you want to write horribly - complex shell scripts, or use some horribly complex shell script - written by others, this utility may be for you. Most people will - wisely leave this disabled. - -config BUSYBOX_CONFIG_HEXDUMP - bool "hexdump" - default y - help - The hexdump utility is used to display binary data in a readable - way that is comparable to the output from most hex editors. - -config BUSYBOX_CONFIG_HWCLOCK - bool "hwclock" - default n - help - The hwclock utility is used to read and set the hardware clock - on a system. This is primarily used to set the current time on - shutdown in the hardware clock, so the hardware will keep the - correct time when Linux is _not_ running. - -config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONGOPTIONS - bool " Support long options (--hctosys,...)" - default n - depends on BUSYBOX_CONFIG_HWCLOCK - help - By default, the hwclock utility only uses short options. If you - are overly fond of its long options, such as --hctosys, --utc, etc) - then enable this option. - -config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS - bool " Use FHS /var/lib/hwclock/adjtime" - default n - depends on BUSYBOX_CONFIG_HWCLOCK - help - Starting with FHS 2.3, the adjtime state file is supposed to exist - at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish - to use the FHS behavior, answer Y here, otherwise answer N for the - classic /etc/adjtime path. - - http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO - -config BUSYBOX_CONFIG_IPCRM - bool "ipcrm" - default n - select BUSYBOX_CONFIG_FEATURE_SUID - help - The ipcrm utility allows the removal of System V interprocess - communication (IPC) objects and the associated data structures - from the system. - -config BUSYBOX_CONFIG_IPCS - bool "ipcs" - default n - select BUSYBOX_CONFIG_FEATURE_SUID - help - The ipcs utility is used to provide information on the currently - allocated System V interprocess (IPC) objects in the system. - -config BUSYBOX_CONFIG_LOSETUP - bool "losetup" - default n - help - losetup is used to associate or detach a loop device with a regular - file or block device, and to query the status of a loop device. This - version does not currently support enabling data encryption. - -config BUSYBOX_CONFIG_MDEV - bool "mdev" - default n - help - mdev is a mini-udev implementation: call it with -s to populate - /dev from /sys, then "echo /sbin/mdev > /proc/sys/kernel/hotplug" to - have it handle hotplug events afterwards. Device names are taken - from sysfs. - -config BUSYBOX_CONFIG_FEATURE_MDEV_CONF - bool " Support /etc/mdev.conf" - default n - depends on BUSYBOX_CONFIG_MDEV - help - The mdev config file contains lines that look like: - - hd[a-z][0-9]* 0:3 660 - - That's device name (with regex match), uid:gid, and permissions. - - Optionally, that can be followed (on the same line) by an asterisk - and a command line to run after creating the corresponding device(s), - ala: - - hdc root:cdrom 660 *ln -s hdc cdrom - - Config file parsing stops on the first matching line. If no config - entry is matched, devices are created with default 0:0 660. (Make - the last line match .* to override this.) - -config BUSYBOX_CONFIG_MKSWAP - bool "mkswap" - default n - help - The mkswap utility is used to configure a file or disk partition as - Linux swap space. This allows Linux to use the entire file or - partition as if it were additional RAM, which can greatly increase - the capability of low-memory machines. This additional memory is - much slower than real RAM, but can be very helpful at preventing your - applications being killed by the Linux out of memory (OOM) killer. - Once you have created swap space using 'mkswap' you need to enable - the swap space using the 'swapon' utility. - -config BUSYBOX_CONFIG_MORE - bool "more" - default y - help - more is a simple utility which allows you to read text one screen - sized page at a time. If you want to read text that is larger than - the screen, and you are using anything faster than a 300 baud modem, - you will probably find this utility very helpful. If you don't have - any need to reading text files, you can leave this disabled. - -config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS - bool " Use termios to manipulate the screen" - default y - depends on BUSYBOX_CONFIG_MORE - help - This option allows utilities such as 'more' and 'top' to determine - the size of the screen. If you leave this disabled, your utilities - that display things on the screen will be especially primitive and - will be unable to determine the current screen size, and will be - unable to move the cursor. - -config BUSYBOX_CONFIG_MOUNT - bool "mount" - default y - help - All files and filesystems in Unix are arranged into one big directory - tree. The 'mount' utility is used to graft a filesystem onto a - particular part of the tree. A filesystem can either live on a block - device, or it can be accessible over the network, as is the case with - NFS filesystems. Most people using BusyBox will also want to enable - the 'mount' utility. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS - bool " Support mounting NFS file systems" - default y - depends on BUSYBOX_CONFIG_MOUNT - help - Enable mounting of NFS file systems. - -config BUSYBOX_CONFIG_PIVOT_ROOT - bool "pivot_root" - default y - help - The pivot_root utility swaps the mount points for the root filesystem - with some other mounted filesystem. This allows you to do all sorts - of wild and crazy things with your Linux system and is far more - powerful than 'chroot'. - - Note: This is for initrd in linux 2.4. Under initramfs (introduced - in linux 2.6) use switch_root instead. - -config BUSYBOX_CONFIG_RDATE - bool "rdate" - default y - help - The rdate utility allows you to synchronize the date and time of your - system clock with the date and time of a remote networked system using - the RFC868 protocol, which is built into the inetd daemon on most - systems. - -config BUSYBOX_CONFIG_READPROFILE - bool "readprofile" - default n - help - This allows you to parse /proc/profile for basic profiling. - -config BUSYBOX_CONFIG_SETARCH - bool "setarch" - default n - help - The linux32 utility is used to create a 32bit environment for the - specified program (usually a shell). It only makes sense to have - this util on a system that supports both 64bit and 32bit userland - (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...). - -config BUSYBOX_CONFIG_SWAPONOFF - bool "swaponoff" - default n - help - This option enables both the 'swapon' and the 'swapoff' utilities. - Once you have created some swap space using 'mkswap', you also need - to enable your swap space with the 'swapon' utility. The 'swapoff' - utility is used, typically at system shutdown, to disable any swap - space. If you are not using any swap space, you can leave this - option disabled. - -config BUSYBOX_CONFIG_SWITCH_ROOT - bool "switch_root" - default y - help - The switch_root utility is used from initramfs to select a new - root device. Under initramfs, you have to use this instead of - pivot_root. (Stop reading here if you don't care why.) - - Booting with initramfs extracts a gzipped cpio archive into rootfs - (which is a variant of ramfs/tmpfs). Because rootfs can't be moved - or unmounted*, pivot_root will not work from initramfs. Instead, - switch_root deletes everything out of rootfs (including itself), - does a mount --move that overmounts rootfs with the new root, and - then execs the specified init program. - - * Because the Linux kernel uses rootfs internally as the starting - and ending point for searching through the kernel's doubly linked - list of active mount points. That's why. - -config BUSYBOX_CONFIG_UMOUNT - bool "umount" - default y - help - When you want to remove a mounted filesystem from its current mount point, - for example when you are shutting down the system, the 'umount' utility is - the tool to use. If you enabled the 'mount' utility, you almost certainly - also want to enable 'umount'. - -config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL - bool " umount -a option" - default y - depends on BUSYBOX_CONFIG_UMOUNT - help - Support -a option to unmount all currently mounted filesystems. - -comment "Common options for mount/umount" - depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT - -config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP - bool " Support loopback mounts" - default y - depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT - help - Enabling this feature allows automatic mounting of files (containing - filesystem images) via the linux kernel's loopback devices. The mount - command will detect you are trying to mount a file instead of a block - device, and transparently associate the file with a loopback device. - The umount command will also free that loopback device. - - You can still use the 'losetup' utility (to manually associate files - with loop devices) if you need to do something advanced, such as - specify an offset or cryptographic options to the loopback device. - (If you don't want umount to free the loop device, use "umount -D".) - -config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT - bool " Support for the old /etc/mtab file" - default n - depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT - help - Historically, Unix systems kept track of the currently mounted - partitions in the file "/etc/mtab". These days, the kernel exports - the list of currently mounted partitions in "/proc/mounts", rendering - the old mtab file obsolete. (In modern systems, /etc/mtab should be - a symlink to /proc/mounts.) - - The only reason to have mount maintain an /etc/mtab file itself is if - your stripped-down embedded system does not have a /proc directory. - If you must use this, keep in mind it's inherently brittle (for - example a mount under chroot won't update it), can't handle modern - features like separate per-process filesystem namespaces, requires - that your /etc directory be writeable, tends to get easily confused - by --bind or --move mounts, and so on. (In brief: avoid.) - -endmenu - |