diff options
Diffstat (limited to 'openwrt/docs')
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt | 97 | ||||
| -rw-r--r-- | openwrt/docs/hardware/linksys/wrt54g_v20/info.txt | 3 |
2 files changed, 99 insertions, 1 deletions
diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt new file mode 100644 index 000000000..83b60125f --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt @@ -0,0 +1,97 @@ +PU revision is: 00029007 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005 +Determined physical RAM map: + memory: 02000000 @ 00000000 (usable) +On node 0 totalpages: 8192 +zone(0): 8192 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4712 rev 1 at 200 MHz +Using 100.000 MHz high precision timer. +Calibrating delay loop... 199.47 BogoMIPS +Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem) +Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) +Inode cache hash table entries: 2048 (order: 2, 16384 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 8192 (order: 3, 32768 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Disabled +PCI: Fixing up bus 0 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +ttyS00 at 0xb8000300 (irq = 3) is a 16550A +ttyS01 at 0xb8000400 (irq = 0) is a 16550A +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 +Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 +cfi_cmdset_0001: Erase suspend on write enabled +0: offset=0x0,size=0x2000,blocks=8 +1: offset=0x10000,size=0x10000,blocks=63 +Using word write method +Flash device: 0x400000 at 0x1c000000 +Creating 4 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000f0000-0x003f0000 : "rootfs" +0x003f0000-0x00400000 : "nvram" +sflash: found no supported devices +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 2048 bind 4096) +ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> +All bugs added by David S. Miller <davem@redhat.com> +VFS: Mounted root (jffs2 filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 88k freed +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 00000101 +using v2 hardware +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +5325E VLAN programming for BCM5325E-MDIO I/F switch +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:01.0 to 64 +eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan0: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +br0: port 2(eth1) entering learning state +br0: port 1(vlan0) entering learning state +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan0) entering forwarding state +br0: topology change detected, propagating +vlan1: Setting MAC address to 00 0a 48 06 82 50. +vlan1: add 01:00:5e:00:00:01 mcast address to master interface +device br0 entered promiscuous mode +device br0 left promiscuous mode +device br0 entered promiscuous mode +device br0 left promiscuous mode + diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt index 513692c58..8278e098e 100644 --- a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt +++ b/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt @@ -4,7 +4,7 @@ Online Description from Linksys: http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 CPU: BCM4712 at 200 MHz -RAM: 16 MB +RAM: 16 MB (32MB on the XH models, please check http://openwrt.org/forum/viewtopic.php?t=731) Flash: 4 MB 1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller 1 Broadcom BCM4320 802.11 Wireless Controller @@ -16,3 +16,4 @@ nvram.txt: contents of NVRAM after OpenWRT upgrade cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) ifconfig.txt: output of ifconfig (2.4.29) pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg (XH model, 2.4.29) |