summaryrefslogtreecommitdiffstats
path: root/obsolete-buildroot/sources
diff options
context:
space:
mode:
Diffstat (limited to 'obsolete-buildroot/sources')
-rw-r--r--obsolete-buildroot/sources/busybox-openwrt-120-udhcp.patch129
-rw-r--r--obsolete-buildroot/sources/cramfs.patch1269
-rw-r--r--obsolete-buildroot/sources/device_table.txt163
-rw-r--r--obsolete-buildroot/sources/dnsmasq1-openwrt.patch219
-rw-r--r--obsolete-buildroot/sources/kernel-patches/001-patch-2.4.26-pre5.bz2bin729361 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/006-ieee1394-hotplug.bz2bin339 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/007-scsi_add_remove_single.bz2bin2990 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/008-ieee1394-fix.bz2bin390 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/009-always-inline.bz2bin468 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/010-optimize-for-size.bz2bin1186 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/012-x86-check_gcc.bz2bin329 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/017-printk.bz2bin336 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/018-slab-loop-init.bz2bin268 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/041-changeloop.patch.bz2bin2783 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/042-loopfixes.patch.bz2bin640 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/044-streaming_io.bz2bin1743 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/062-silence-blk-queue.bz2bin382 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/063-silence.kbd.patch.bz2bin506 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/064-shutup-md.bz2bin501 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/079-jiffies64.bz2bin5066 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/089-no-touch-makedep.bz2bin858 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/kernel-patches/100_VERSION.bz2bin236 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/linux.config877
-rw-r--r--obsolete-buildroot/sources/openwrt/busybox/busybox.config (renamed from obsolete-buildroot/sources/busybox.config)0
-rw-r--r--obsolete-buildroot/sources/openwrt/busybox/patches/100-killall5.patch (renamed from obsolete-buildroot/sources/busybox-openwrt-100-killall5.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/busybox/patches/110-telnetd.patch (renamed from obsolete-buildroot/sources/busybox-openwrt-110-telnetd.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/busybox/patches/130-resetmon.patch (renamed from obsolete-buildroot/sources/busybox-openwrt-130-resetmon.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.conffiles (renamed from obsolete-buildroot/sources/openssh.client.conffiles)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.control (renamed from obsolete-buildroot/sources/openssh.client.control)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.ex.control (renamed from obsolete-buildroot/sources/openssh.client.ex.control)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.preinst (renamed from obsolete-buildroot/sources/openssh.client.preinst)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.ssh_config (renamed from obsolete-buildroot/sources/openssh.client.ssh_config)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.patch (renamed from obsolete-buildroot/sources/openssh.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.S50sshd-ipk (renamed from obsolete-buildroot/sources/openssh.server.S50sshd-ipk)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.conffiles (renamed from obsolete-buildroot/sources/openssh.server.conffiles)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.control (renamed from obsolete-buildroot/sources/openssh.server.control)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.postinst (renamed from obsolete-buildroot/sources/openssh.server.postinst)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.preinst (renamed from obsolete-buildroot/sources/openssh.server.preinst)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.sshd_config (renamed from obsolete-buildroot/sources/openssh.server.sshd_config)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.sftp-client.control (renamed from obsolete-buildroot/sources/openssh.sftp-client.control)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.sftp-server.control (renamed from obsolete-buildroot/sources/openssh.sftp-server.control)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssl/control (renamed from obsolete-buildroot/sources/openssl.control)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/openssl/openssl.patch (renamed from obsolete-buildroot/sources/openssl.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/conffiles (renamed from obsolete-buildroot/sources/pppoecd.conffiles)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/control (renamed from obsolete-buildroot/sources/pppoecd.control)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/postrm (renamed from obsolete-buildroot/sources/pppoecd.postrm)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/prerm5
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/pppoecd/pppoecd-pathnames.patch (renamed from obsolete-buildroot/sources/pppoecd-pathnames.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/pppoecd/pppoecd.patch (renamed from obsolete-buildroot/sources/pppoecd.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/pppoecd/root/etc/ppp/ip-up (renamed from obsolete-buildroot/sources/pppoecd.ip-up)0
-rw-r--r--obsolete-buildroot/sources/openwrt/ipkg/zlib/control10
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/compressed-20040531.tar.bz2 (renamed from obsolete-buildroot/sources/compressed-20040531.tar.bz2)bin10970 -> 10970 bytes
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/diag.c (renamed from obsolete-buildroot/sources/openwrt-diag.c)0
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/linux.config (renamed from obsolete-buildroot/sources/openwrt-wrt54g-linux.config)20
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/patches/100-revert_netfilter.patch (renamed from obsolete-buildroot/sources/openwrt-linux-netfilter.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/patches/110-sch_htb.patch (renamed from obsolete-buildroot/sources/openwrt-linux-sch_htb.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/patches/120-openwrt.patch (renamed from obsolete-buildroot/sources/openwrt-wrt54g-linux.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/patches/130-nfsswap.patch (renamed from obsolete-buildroot/sources/openwrt-wrt54g-nfsswap.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/kernel/patches/140-ebtables-brnf-5.patch (renamed from obsolete-buildroot/sources/ebtables-brnf-5.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/patches/wrt54g-router.patch (renamed from obsolete-buildroot/sources/openwrt-wrt54g-router.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/patches/wrt54g-shared.patch (renamed from obsolete-buildroot/sources/openwrt-wrt54g-shared.patch)0
-rw-r--r--obsolete-buildroot/sources/openwrt/tools/addpattern.c (renamed from obsolete-buildroot/sources/addpattern.c)0
-rw-r--r--obsolete-buildroot/sources/openwrt/tools/trx.c316
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/TZ1
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/fstab8
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/group10
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/hostname1
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/hosts1
-rwxr-xr-xobsolete-buildroot/sources/target_skeleton/etc/init.d/S20urandom44
-rwxr-xr-xobsolete-buildroot/sources/target_skeleton/etc/init.d/S40network35
-rwxr-xr-xobsolete-buildroot/sources/target_skeleton/etc/init.d/rcS27
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/inittab47
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/inputrc44
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/issue4
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/network/interfaces4
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/passwd13
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/profile48
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/protocols31
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/random-seedbin512 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/resolv.conf2
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/securetty12
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/services302
-rw-r--r--obsolete-buildroot/sources/target_skeleton/etc/shadow12
-rw-r--r--obsolete-buildroot/sources/target_skeleton/root/.bash_history0
-rw-r--r--obsolete-buildroot/sources/target_skeleton/root/.bash_logout7
-rw-r--r--obsolete-buildroot/sources/target_skeleton/root/.bash_profile15
-rw-r--r--obsolete-buildroot/sources/target_skeleton/root/.bashrc48
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/a/ansibin1450 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/d/dumbbin308 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/l/linuxbin1551 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/r/rxvtbin1627 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screenbin1318 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screen-wbin1334 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/sunbin1019 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt100bin1143 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt220bin975 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt52bin461 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xtermbin1366 -> 0 bytes
-rw-r--r--obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xterm-xfree86bin1840 -> 0 bytes
-rwxr-xr-xobsolete-buildroot/sources/target_skeleton/usr/share/udhcpc/default.script39
100 files changed, 351 insertions, 3412 deletions
diff --git a/obsolete-buildroot/sources/busybox-openwrt-120-udhcp.patch b/obsolete-buildroot/sources/busybox-openwrt-120-udhcp.patch
deleted file mode 100644
index f8e8d33b3..000000000
--- a/obsolete-buildroot/sources/busybox-openwrt-120-udhcp.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-diff -urN busybox-dist/networking/udhcp/dumpleases.c busybox/networking/udhcp/dumpleases.c
---- busybox-dist/networking/udhcp/dumpleases.c 2004-03-15 02:29:00.000000000 -0600
-+++ busybox/networking/udhcp/dumpleases.c 2004-03-16 09:52:32.000000000 -0600
-@@ -42,7 +42,7 @@
- #endif
- {
- FILE *fp;
-- int i, c, mode = REMAINING;
-+ int i, c, mode = ABSOLUTE;
- long expires;
- const char *file = LEASES_FILE;
- struct dhcpOfferedAddr lease;
-@@ -73,7 +73,7 @@
-
- fp = xfopen(file, "r");
-
-- printf("Mac Address IP-Address Expires %s\n", mode == REMAINING ? "in" : "at");
-+ printf("Mac Address IP-Address Hostname Expires %s\n", mode == REMAINING ? "in" : "at");
- /* "00:00:00:00:00:00 255.255.255.255 Wed Jun 30 21:49:08 1993" */
- while (fread(&lease, sizeof(lease), 1, fp)) {
-
-@@ -84,7 +84,8 @@
- addr.s_addr = lease.yiaddr;
- printf(" %-15s", inet_ntoa(addr));
- expires = ntohl(lease.expires);
-- printf(" ");
-+ //expires = lease.expires;
-+ printf(" %-15s ",lease.hostname);
- if (mode == REMAINING) {
- if (!expires) printf("expired\n");
- else {
-diff -urN busybox-dist/networking/udhcp/files.c busybox/networking/udhcp/files.c
---- busybox-dist/networking/udhcp/files.c 2004-03-15 02:29:00.000000000 -0600
-+++ busybox/networking/udhcp/files.c 2004-03-16 09:50:04.000000000 -0600
-@@ -281,7 +281,7 @@
- if (lease.yiaddr >= server_config.start && lease.yiaddr <= server_config.end) {
- lease.expires = ntohl(lease.expires);
- if (!server_config.remaining) lease.expires -= time(0);
-- if (!(add_lease(lease.chaddr, lease.yiaddr, lease.expires))) {
-+ if (!(add_lease(lease.hostname, lease.chaddr, lease.yiaddr, lease.expires))) {
- LOG(LOG_WARNING, "Too many leases while loading %s\n", file);
- break;
- }
-diff -urN busybox-dist/networking/udhcp/leases.c busybox/networking/udhcp/leases.c
---- busybox-dist/networking/udhcp/leases.c 2004-03-15 02:29:00.000000000 -0600
-+++ busybox/networking/udhcp/leases.c 2004-03-16 09:50:04.000000000 -0600
-@@ -35,7 +35,7 @@
-
-
- /* add a lease into the table, clearing out any old ones */
--struct dhcpOfferedAddr *add_lease(uint8_t *chaddr, uint32_t yiaddr, unsigned long lease)
-+struct dhcpOfferedAddr *add_lease(uint8_t *hostname, uint8_t *chaddr, uint32_t yiaddr, unsigned long lease)
- {
- struct dhcpOfferedAddr *oldest;
-
-@@ -45,6 +45,13 @@
- oldest = oldest_expired_lease();
-
- if (oldest) {
-+ if (hostname) {
-+ uint8_t length = *(hostname-1);
-+ if (length>15) length=15;
-+ memcpy(oldest->hostname,hostname,length);
-+ oldest->hostname[length]=0;
-+ }
-+
- memcpy(oldest->chaddr, chaddr, 16);
- oldest->yiaddr = yiaddr;
- oldest->expires = time(0) + lease;
-@@ -112,7 +119,7 @@
- temp.s_addr = addr;
- LOG(LOG_INFO, "%s belongs to someone, reserving it for %ld seconds",
- inet_ntoa(temp), server_config.conflict_time);
-- add_lease(blank_chaddr, addr, server_config.conflict_time);
-+ add_lease(blank_chaddr, blank_chaddr, addr, server_config.conflict_time);
- return 1;
- } else return 0;
- }
-diff -urN busybox-dist/networking/udhcp/leases.h busybox/networking/udhcp/leases.h
---- busybox-dist/networking/udhcp/leases.h 2004-01-30 17:45:12.000000000 -0600
-+++ busybox/networking/udhcp/leases.h 2004-03-16 09:50:04.000000000 -0600
-@@ -4,6 +4,7 @@
-
-
- struct dhcpOfferedAddr {
-+ uint8_t hostname[16];
- uint8_t chaddr[16];
- uint32_t yiaddr; /* network order */
- uint32_t expires; /* host order */
-@@ -12,7 +13,7 @@
- extern uint8_t blank_chaddr[];
-
- void clear_lease(uint8_t *chaddr, uint32_t yiaddr);
--struct dhcpOfferedAddr *add_lease(uint8_t *chaddr, uint32_t yiaddr, unsigned long lease);
-+struct dhcpOfferedAddr *add_lease(uint8_t *hostname, uint8_t *chaddr, uint32_t yiaddr, unsigned long lease);
- int lease_expired(struct dhcpOfferedAddr *lease);
- struct dhcpOfferedAddr *oldest_expired_lease(void);
- struct dhcpOfferedAddr *find_lease_by_chaddr(uint8_t *chaddr);
-diff -urN busybox-dist/networking/udhcp/serverpacket.c busybox/networking/udhcp/serverpacket.c
---- busybox-dist/networking/udhcp/serverpacket.c 2004-03-15 02:29:01.000000000 -0600
-+++ busybox/networking/udhcp/serverpacket.c 2004-03-16 09:51:36.000000000 -0600
-@@ -29,6 +29,7 @@
- #include "dhcpd.h"
- #include "options.h"
- #include "common.h"
-+#include "files.h"
-
- /* send a packet to giaddr using the kernel ip stack */
- static int send_packet_to_relay(struct dhcpMessage *payload)
-@@ -152,7 +153,7 @@
- return -1;
- }
-
-- if (!add_lease(packet.chaddr, packet.yiaddr, server_config.offer_time)) {
-+ if (!add_lease(get_option(oldpacket, DHCP_HOST_NAME), packet.chaddr, packet.yiaddr, server_config.offer_time)) {
- LOG(LOG_WARNING, "lease pool is full -- OFFER abandoned");
- return -1;
- }
-@@ -233,7 +234,9 @@
- if (send_packet(&packet, 0) < 0)
- return -1;
-
-- add_lease(packet.chaddr, packet.yiaddr, lease_time_align);
-+ add_lease(get_option(oldpacket, DHCP_HOST_NAME), packet.chaddr, packet.yiaddr, lease_time_align);
-+
-+ write_leases();
-
- return 0;
- }
diff --git a/obsolete-buildroot/sources/cramfs.patch b/obsolete-buildroot/sources/cramfs.patch
deleted file mode 100644
index 884eb8cb8..000000000
--- a/obsolete-buildroot/sources/cramfs.patch
+++ /dev/null
@@ -1,1269 +0,0 @@
---- cramfs-1.1.orig/cramfsck.c 2002-02-22 17:00:42.000000000 -0700
-+++ cramfs-1.1/cramfsck.c 2002-12-21 01:25:17.000000000 -0700
-@@ -51,10 +51,11 @@
- #include <utime.h>
- #include <sys/ioctl.h>
- #define _LINUX_STRING_H_
--#include <linux/fs.h>
--#include <linux/cramfs_fs.h>
-+#include "linux/cramfs_fs.h"
- #include <zlib.h>
-
-+#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
-+
- /* Exit codes used by fsck-type programs */
- #define FSCK_OK 0 /* No errors */
- #define FSCK_NONDESTRUCT 1 /* File system errors corrected */
-@@ -75,7 +76,7 @@
- static int opt_verbose = 0; /* 1 = verbose (-v), 2+ = very verbose (-vv) */
- #ifdef INCLUDE_FS_TESTS
- static int opt_extract = 0; /* extract cramfs (-x) */
--static char *extract_dir = "root"; /* extraction directory (-x) */
-+static char *extract_dir = "/"; /* extraction directory (-x) */
- static uid_t euid; /* effective UID */
-
- /* (cramfs_super + start) <= start_dir < end_dir <= start_data <= end_data */
-@@ -155,7 +156,7 @@
- }
-
- if (*length < sizeof(struct cramfs_super)) {
-- die(FSCK_UNCORRECTED, 0, "file length too short");
-+ die(FSCK_UNCORRECTED, 0, "filesystem smaller than a cramfs superblock!");
- }
-
- /* find superblock */
-@@ -190,7 +191,8 @@
- die(FSCK_UNCORRECTED, 0, "zero file count");
- }
- if (*length < super.size) {
-- die(FSCK_UNCORRECTED, 0, "file length too short");
-+ die(FSCK_UNCORRECTED, 0, "file length too short, %lu is smaller than %lu",
-+ *length, super.size);
- }
- else if (*length > super.size) {
- fprintf(stderr, "warning: file extends past end of filesystem\n");
-@@ -267,11 +269,11 @@
- #ifdef INCLUDE_FS_TESTS
- static void print_node(char type, struct cramfs_inode *i, char *name)
- {
-- char info[10];
-+ char info[11];
-
- if (S_ISCHR(i->mode) || (S_ISBLK(i->mode))) {
- /* major/minor numbers can be as high as 2^12 or 4096 */
-- snprintf(info, 10, "%4d,%4d", major(i->size), minor(i->size));
-+ snprintf(info, 11, "%4d,%4d", major(i->size), minor(i->size));
- }
- else {
- /* size be as high as 2^24 or 16777216 */
-@@ -445,8 +447,10 @@
- }
- /* TODO: Do we need to check end_dir for empty case? */
- memcpy(newpath, path, pathlen);
-- newpath[pathlen] = '/';
-- pathlen++;
-+ if (pathlen > 1) {
-+ newpath[pathlen] = '/';
-+ pathlen++;
-+ }
- if (opt_verbose) {
- print_node('d', i, path);
- }
---- cramfs-1.1.orig/device_table.txt 1969-12-31 17:00:00.000000000 -0700
-+++ cramfs-1.1/device_table.txt 2003-01-01 05:13:44.000000000 -0700
-@@ -0,0 +1,129 @@
-+# When building a target filesystem, it is desirable to not have to
-+# become root and then run 'mknod' a thousand times. Using a device
-+# table you can create device nodes and directories "on the fly".
-+#
-+# This is a sample device table file for use with mkcramfs. You can
-+# do all sorts of interesting things with a device table file. For
-+# example, if you want to adjust the permissions on a particular file
-+# you can just add an entry like:
-+# /sbin/foobar f 2755 0 0 - - - - -
-+# and (assuming the file /sbin/foobar exists) it will be made setuid
-+# root (regardless of what its permissions are on the host filesystem.
-+# Furthermore, you can use a single table entry to create a many device
-+# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-+# I could just use the following two table entries:
-+# /dev/hda b 640 0 0 3 0 0 0 -
-+# /dev/hda b 640 0 0 3 1 1 1 15
-+#
-+# Device table entries take the form of:
-+# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+# where name is the file name, type can be one of:
-+# f A regular file
-+# d Directory
-+# c Character special device file
-+# b Block special device file
-+# p Fifo (named pipe)
-+# uid is the user id for the target file, gid is the group id for the
-+# target file. The rest of the entries (major, minor, etc) apply only
-+# to device special files.
-+
-+# Have fun
-+# -Erik Andersen <andersen@codepoet.org>
-+#
-+
-+#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+/dev d 755 0 0 - - - - -
-+/dev/mem c 640 0 0 1 1 0 0 -
-+/dev/kmem c 640 0 0 1 2 0 0 -
-+/dev/null c 640 0 0 1 3 0 0 -
-+/dev/zero c 640 0 0 1 5 0 0 -
-+/dev/random c 640 0 0 1 8 0 0 -
-+/dev/urandom c 640 0 0 1 9 0 0 -
-+/dev/tty c 666 0 0 5 0 0 0 -
-+/dev/tty c 666 0 0 4 0 0 1 6
-+/dev/console c 640 0 0 5 1 0 0 -
-+/dev/ram b 640 0 0 1 1 0 0 -
-+/dev/ram b 640 0 0 1 0 0 1 4
-+/dev/loop b 640 0 0 7 0 0 1 2
-+/dev/ptmx c 666 0 0 5 2 0 0 -
-+#/dev/ttyS c 640 0 0 4 64 0 1 4
-+#/dev/psaux c 640 0 0 10 1 0 0 -
-+#/dev/rtc c 640 0 0 10 135 0 0 -
-+
-+# Adjust permissions on some normal files
-+#/etc/shadow f 600 0 0 - - - - -
-+#/bin/tinylogin f 4755 0 0 - - - - -
-+
-+# User-mode Linux stuff
-+/dev/ubda b 640 0 0 98 0 0 0 -
-+/dev/ubda b 640 0 0 98 1 1 1 15
-+
-+# IDE Devices
-+/dev/hda b 640 0 0 3 0 0 0 -
-+/dev/hda b 640 0 0 3 1 1 1 15
-+/dev/hdb b 640 0 0 3 64 0 0 -
-+/dev/hdb b 640 0 0 3 65 1 1 15
-+#/dev/hdc b 640 0 0 22 0 0 0 -
-+#/dev/hdc b 640 0 0 22 1 1 1 15
-+#/dev/hdd b 640 0 0 22 64 0 0 -
-+#/dev/hdd b 640 0 0 22 65 1 1 15
-+#/dev/hde b 640 0 0 33 0 0 0 -
-+#/dev/hde b 640 0 0 33 1 1 1 15
-+#/dev/hdf b 640 0 0 33 64 0 0 -
-+#/dev/hdf b 640 0 0 33 65 1 1 15
-+#/dev/hdg b 640 0 0 34 0 0 0 -
-+#/dev/hdg b 640 0 0 34 1 1 1 15
-+#/dev/hdh b 640 0 0 34 64 0 0 -
-+#/dev/hdh b 640 0 0 34 65 1 1 15
-+
-+# SCSI Devices
-+#/dev/sda b 640 0 0 8 0 0 0 -
-+#/dev/sda b 640 0 0 8 1 1 1 15
-+#/dev/sdb b 640 0 0 8 16 0 0 -
-+#/dev/sdb b 640 0 0 8 17 1 1 15
-+#/dev/sdc b 640 0 0 8 32 0 0 -
-+#/dev/sdc b 640 0 0 8 33 1 1 15
-+#/dev/sdd b 640 0 0 8 48 0 0 -
-+#/dev/sdd b 640 0 0 8 49 1 1 15
-+#/dev/sde b 640 0 0 8 64 0 0 -
-+#/dev/sde b 640 0 0 8 65 1 1 15
-+#/dev/sdf b 640 0 0 8 80 0 0 -
-+#/dev/sdf b 640 0 0 8 81 1 1 15
-+#/dev/sdg b 640 0 0 8 96 0 0 -
-+#/dev/sdg b 640 0 0 8 97 1 1 15
-+#/dev/sdh b 640 0 0 8 112 0 0 -
-+#/dev/sdh b 640 0 0 8 113 1 1 15
-+#/dev/sg c 640 0 0 21 0 0 1 15
-+#/dev/scd b 640 0 0 11 0 0 1 15
-+#/dev/st c 640 0 0 9 0 0 1 8
-+#/dev/nst c 640 0 0 9 128 0 1 8
-+#/dev/st c 640 0 0 9 32 1 1 4
-+#/dev/st c 640 0 0 9 64 1 1 4
-+#/dev/st c 640 0 0 9 96 1 1 4
-+
-+# Floppy disk devices
-+#/dev/fd b 640 0 0 2 0 0 1 2
-+#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-+#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-+#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-+#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-+#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-+#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-+#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-+#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-+
-+# All the proprietary cdrom devices in the world
-+#/dev/aztcd b 640 0 0 29 0 0 0 -
-+#/dev/bpcd b 640 0 0 41 0 0 0 -
-+#/dev/capi20 c 640 0 0 68 0 0 1 2
-+#/dev/cdu31a b 640 0 0 15 0 0 0 -
-+#/dev/cdu535 b 640 0 0 24 0 0 0 -
-+#/dev/cm206cd b 640 0 0 32 0 0 0 -
-+#/dev/sjcd b 640 0 0 18 0 0 0 -
-+#/dev/sonycd b 640 0 0 15 0 0 0 -
-+#/dev/gscd b 640 0 0 16 0 0 0 -
-+#/dev/sbpcd b 640 0 0 25 0 0 0 -
-+#/dev/sbpcd b 640 0 0 25 0 0 1 4
-+#/dev/mcd b 640 0 0 23 0 0 0 -
-+#/dev/optcd b 640 0 0 17 0 0 0 -
-+
---- cramfs-1.1.orig/mkcramfs.c 2002-02-20 01:03:32.000000000 -0700
-+++ cramfs-1.1/mkcramfs.c 2002-12-21 01:25:17.000000000 -0700
-@@ -1,3 +1,4 @@
-+/* vi: set sw=8 ts=8: */
- /*
- * mkcramfs - make a cramfs file system
- *
-@@ -16,12 +17,21 @@
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Added device table support (code taken from mkfs.jffs2.c, credit to
-+ * Erik Andersen <andersen@codepoet.org>) as well as an option to squash
-+ * permissions. - Russ Dill <Russ.Dill@asu.edu> September 2002
-+ *
-+ * Reworked, cleaned up, and updated for cramfs-1.1, December 2002
-+ * - Erik Andersen <andersen@codepoet.org>
-+ *
- */
-
- /*
- * If you change the disk format of cramfs, please update fs/cramfs/README.
- */
-
-+#define _GNU_SOURCE
- #include <sys/types.h>
- #include <stdio.h>
- #include <sys/stat.h>
-@@ -33,8 +43,15 @@
- #include <errno.h>
- #include <string.h>
- #include <stdarg.h>
-+#include <libgen.h>
-+#include <ctype.h>
-+#include <assert.h>
-+#include <getopt.h>
- #include <linux/cramfs_fs.h>
- #include <zlib.h>
-+#ifdef DMALLOC
-+#include <dmalloc.h>
-+#endif
-
- /* Exit codes used by mkfs-type programs */
- #define MKFS_OK 0 /* No errors */
-@@ -71,11 +88,17 @@
- + (1 << CRAMFS_SIZE_WIDTH) - 1 /* filesize */ \
- + (1 << CRAMFS_SIZE_WIDTH) * 4 / PAGE_CACHE_SIZE /* block pointers */ )
-
-+
-+/* The kernel assumes PAGE_CACHE_SIZE as block size. */
-+#define PAGE_CACHE_SIZE (4096)
-+
-+
- static const char *progname = "mkcramfs";
- static unsigned int blksize = PAGE_CACHE_SIZE;
- static long total_blocks = 0, total_nodes = 1; /* pre-count the root node */
- static int image_length = 0;
-
-+
- /*
- * If opt_holes is set, then mkcramfs can create explicit holes in the
- * data, which saves 26 bytes per hole (which is a lot smaller a
-@@ -91,10 +114,12 @@
- static int opt_holes = 0;
- static int opt_pad = 0;
- static int opt_verbose = 0;
-+static int opt_squash = 0;
- static char *opt_image = NULL;
- static char *opt_name = NULL;
-
- static int warn_dev, warn_gid, warn_namelen, warn_skip, warn_size, warn_uid;
-+static const char *const memory_exhausted = "memory exhausted";
-
- /* In-core version of inode / directory entry. */
- struct entry {
-@@ -123,7 +148,7 @@
- {
- FILE *stream = status ? stderr : stdout;
-
-- fprintf(stream, "usage: %s [-h] [-e edition] [-i file] [-n name] dirname outfile\n"
-+ fprintf(stream, "usage: %s [-h] [-e edition] [-i file] [-n name] [-D file] dirname outfile\n"
- " -h print this help\n"
- " -E make all warnings errors (non-zero exit status)\n"
- " -e edition set edition number (part of fsid)\n"
-@@ -133,39 +158,157 @@
- " -s sort directory entries (old option, ignored)\n"
- " -v be more verbose\n"
- " -z make explicit holes (requires >= 2.3.39)\n"
-- " dirname root of the directory tree to be compressed\n"
-+ " -D Use the named FILE as a device table file\n"
-+ " -q squash permissions (make everything owned by root)\n"
-+ " dirname root of the filesystem to be compressed\n"
- " outfile output file\n", progname, PAD_SIZE);
-
- exit(status);
- }
-
--static void die(int status, int syserr, const char *fmt, ...)
-+static void verror_msg(const char *s, va_list p)
-+{
-+ fflush(stdout);
-+ fprintf(stderr, "mkcramfs: ");
-+ vfprintf(stderr, s, p);
-+}
-+
-+static void vperror_msg(const char *s, va_list p)
-+{
-+ int err = errno;
-+
-+ if (s == 0)
-+ s = "";
-+ verror_msg(s, p);
-+ if (*s)
-+ s = ": ";
-+ fprintf(stderr, "%s%s\n", s, strerror(err));
-+}
-+
-+static void perror_msg(const char *s, ...)
-+{
-+ va_list p;
-+
-+ va_start(p, s);
-+ vperror_msg(s, p);
-+ va_end(p);
-+}
-+
-+static void error_msg_and_die(const char *s, ...)
-+{
-+ va_list p;
-+
-+ va_start(p, s);
-+ verror_msg(s, p);
-+ va_end(p);
-+ putc('\n', stderr);
-+ exit(MKFS_ERROR);
-+}
-+
-+static void perror_msg_and_die(const char *s, ...)
-+{
-+ va_list p;
-+
-+ va_start(p, s);
-+ vperror_msg(s, p);
-+ va_end(p);
-+ exit(MKFS_ERROR);
-+}
-+#ifndef DMALLOC
-+extern char *xstrdup(const char *s)
-+{
-+ char *t;
-+
-+ if (s == NULL)
-+ return NULL;
-+ t = strdup(s);
-+ if (t == NULL)
-+ error_msg_and_die(memory_exhausted);
-+ return t;
-+}
-+
-+extern void *xmalloc(size_t size)
-+{
-+ void *ptr = malloc(size);
-+
-+ if (ptr == NULL && size != 0)
-+ error_msg_and_die(memory_exhausted);
-+ return ptr;
-+}
-+
-+extern void *xcalloc(size_t nmemb, size_t size)
-+{
-+ void *ptr = calloc(nmemb, size);
-+
-+ if (ptr == NULL && nmemb != 0 && size != 0)
-+ error_msg_and_die(memory_exhausted);
-+ return ptr;
-+}
-+
-+extern void *xrealloc(void *ptr, size_t size)
-+{
-+ ptr = realloc(ptr, size);
-+ if (ptr == NULL && size != 0)
-+ error_msg_and_die(memory_exhausted);
-+ return ptr;
-+}
-+#endif
-+
-+static FILE *xfopen(const char *path, const char *mode)
- {
-- va_list arg_ptr;
-- int save = errno;
-+ FILE *fp;
-+
-+ if ((fp = fopen(path, mode)) == NULL)
-+ perror_msg_and_die("%s", path);
-+ return fp;
-+}
-
-- fflush(0);
-- va_start(arg_ptr, fmt);
-- fprintf(stderr, "%s: ", progname);
-- vfprintf(stderr, fmt, arg_ptr);
-- if (syserr) {
-- fprintf(stderr, ": %s", strerror(save));
-+extern int xopen(const char *pathname, int flags, mode_t mode)
-+{
-+ int ret;
-+
-+ if (flags & O_CREAT)
-+ ret = open(pathname, flags, mode);
-+ else
-+ ret = open(pathname, flags);
-+ if (ret == -1) {
-+ perror_msg_and_die("%s", pathname);
- }
-- fprintf(stderr, "\n");
-- va_end(arg_ptr);
-- exit(status);
-+ return ret;
- }
-
-+extern char *xreadlink(const char *path)
-+{
-+ static const int GROWBY = 80; /* how large we will grow strings by */
-+
-+ char *buf = NULL;
-+ int bufsize = 0, readsize = 0;
-+
-+ do {
-+ buf = xrealloc(buf, bufsize += GROWBY);
-+ readsize = readlink(path, buf, bufsize); /* 1st try */
-+ if (readsize == -1) {
-+ perror_msg("%s:%s", progname, path);
-+ return NULL;
-+ }
-+ }
-+ while (bufsize < readsize + 1);
-+
-+ buf[readsize] = '\0';
-+
-+ return buf;
-+}
-+
- static void map_entry(struct entry *entry)
- {
- if (entry->path) {
- entry->fd = open(entry->path, O_RDONLY);
- if (entry->fd < 0) {
-- die(MKFS_ERROR, 1, "open failed: %s", entry->path);
-+ error_msg_and_die("open failed: %s", entry->path);
- }
- entry->uncompressed = mmap(NULL, entry->size, PROT_READ, MAP_PRIVATE, entry->fd, 0);
- if (entry->uncompressed == MAP_FAILED) {
-- die(MKFS_ERROR, 1, "mmap failed: %s", entry->path);
-+ error_msg_and_die("mmap failed: %s", entry->path);
- }
- }
- }
-@@ -174,8 +317,9 @@
- {
- if (entry->path) {
- if (munmap(entry->uncompressed, entry->size) < 0) {
-- die(MKFS_ERROR, 1, "munmap failed: %s", entry->path);
-+ error_msg_and_die("munmap failed: %s", entry->path);
- }
-+ entry->uncompressed=NULL;
- close(entry->fd);
- }
- }
-@@ -204,7 +348,8 @@
- find_identical_file(orig->next, newfile));
- }
-
--static void eliminate_doubles(struct entry *root, struct entry *orig) {
-+static void eliminate_doubles(struct entry *root, struct entry *orig)
-+{
- if (orig) {
- if (orig->size && (orig->path || orig->uncompressed))
- find_identical_file(root, orig);
-@@ -232,10 +377,7 @@
-
- /* Set up the path. */
- /* TODO: Reuse the parent's buffer to save memcpy'ing and duplication. */
-- path = malloc(len + 1 + MAX_INPUT_NAMELEN + 1);
-- if (!path) {
-- die(MKFS_ERROR, 1, "malloc failed");
-- }
-+ path = xmalloc(len + 1 + MAX_INPUT_NAMELEN + 1);
- memcpy(path, name, len);
- endpath = path + len;
- *endpath = '/';
-@@ -245,7 +387,7 @@
- dircount = scandir(name, &dirlist, 0, cramsort);
-
- if (dircount < 0) {
-- die(MKFS_ERROR, 1, "scandir failed: %s", name);
-+ error_msg_and_die("scandir failed: %s", name);
- }
-
- /* process directory */
-@@ -269,25 +411,20 @@
- }
- namelen = strlen(dirent->d_name);
- if (namelen > MAX_INPUT_NAMELEN) {
-- die(MKFS_ERROR, 0,
-- "very long (%u bytes) filename found: %s\n"
-- "please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile",
-+ error_msg_and_die(
-+ "Very long (%u bytes) filename `%s' found.\n"
-+ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n",
- namelen, dirent->d_name);
- }
- memcpy(endpath, dirent->d_name, namelen + 1);
-
- if (lstat(path, &st) < 0) {
-+ perror(endpath);
- warn_skip = 1;
- continue;
- }
-- entry = calloc(1, sizeof(struct entry));
-- if (!entry) {
-- die(MKFS_ERROR, 1, "calloc failed");
-- }
-- entry->name = strdup(dirent->d_name);
-- if (!entry->name) {
-- die(MKFS_ERROR, 1, "strdup failed");
-- }
-+ entry = xcalloc(1, sizeof(struct entry));
-+ entry->name = xstrdup(dirent->d_name);
- /* truncate multi-byte UTF-8 filenames on character boundary */
- if (namelen > CRAMFS_MAXPATHLEN) {
- namelen = CRAMFS_MAXPATHLEN;
-@@ -297,24 +434,25 @@
- namelen--;
- /* are we reasonably certain it was UTF-8 ? */
- if (entry->name[namelen] < 0x80 || !namelen) {
-- die(MKFS_ERROR, 0, "cannot truncate filenames not encoded in UTF-8");
-+ error_msg_and_die("cannot truncate filenames not encoded in UTF-8");
- }
- }
- entry->name[namelen] = '\0';
- }
- entry->mode = st.st_mode;
- entry->size = st.st_size;
-- entry->uid = st.st_uid;
-+ entry->uid = opt_squash ? 0 : st.st_uid;
- if (entry->uid >= 1 << CRAMFS_UID_WIDTH)
- warn_uid = 1;
-- entry->gid = st.st_gid;
-- if (entry->gid >= 1 << CRAMFS_GID_WIDTH)
-+ entry->gid = opt_squash ? 0 : st.st_gid;
-+ if (entry->gid >= 1 << CRAMFS_GID_WIDTH) {
- /* TODO: We ought to replace with a default
- gid instead of truncating; otherwise there
- are security problems. Maybe mode should
- be &= ~070. Same goes for uid once Linux
- supports >16-bit uids. */
- warn_gid = 1;
-+ }
- size = sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
- *fslen_ub += size;
- if (S_ISDIR(st.st_mode)) {
-@@ -325,21 +463,15 @@
- warn_skip = 1;
- continue;
- }
-- entry->path = strdup(path);
-- if (!entry->path) {
-- die(MKFS_ERROR, 1, "strdup failed");
-- }
-+ entry->path = xstrdup(path);
- if ((entry->size >= 1 << CRAMFS_SIZE_WIDTH)) {
- warn_size = 1;
- entry->size = (1 << CRAMFS_SIZE_WIDTH) - 1;
- }
- }
- } else if (S_ISLNK(st.st_mode)) {
-- entry->uncompressed = malloc(entry->size);
-+ entry->uncompressed = xreadlink(path);
- if (!entry->uncompressed) {
-- die(MKFS_ERROR, 1, "malloc failed");
-- }
-- if (readlink(path, entry->uncompressed, entry->size) < 0) {
- warn_skip = 1;
- continue;
- }
-@@ -351,7 +483,7 @@
- if (entry->size & -(1<<CRAMFS_SIZE_WIDTH))
- warn_dev = 1;
- } else {
-- die(MKFS_ERROR, 0, "bogus file type: %s", entry->name);
-+ error_msg_and_die("bogus file type: %s", entry->name);
- }
-
- if (S_ISREG(st.st_mode) || S_ISLNK(st.st_mode)) {
-@@ -378,7 +510,9 @@
- struct cramfs_super *super = (struct cramfs_super *) base;
- unsigned int offset = sizeof(struct cramfs_super) + image_length;
-
-- offset += opt_pad; /* 0 if no padding */
-+ if (opt_pad) {
-+ offset += opt_pad; /* 0 if no padding */
-+ }
-
- super->magic = CRAMFS_MAGIC;
- super->flags = CRAMFS_FLAG_FSID_VERSION_2 | CRAMFS_FLAG_SORTED_DIRS;
-@@ -414,10 +548,10 @@
- struct cramfs_inode *inode = (struct cramfs_inode *) (base + entry->dir_offset);
-
- if ((offset & 3) != 0) {
-- die(MKFS_ERROR, 0, "illegal offset of %lu bytes", offset);
-+ error_msg_and_die("illegal offset of %lu bytes", offset);
- }
- if (offset >= (1 << (2 + CRAMFS_OFFSET_WIDTH))) {
-- die(MKFS_ERROR, 0, "filesystem too big");
-+ error_msg_and_die("filesystem too big");
- }
- inode->offset = (offset >> 2);
- }
-@@ -429,7 +563,7 @@
- */
- static void print_node(struct entry *e)
- {
-- char info[10];
-+ char info[12];
- char type = '?';
-
- if (S_ISREG(e->mode)) type = 'f';
-@@ -442,11 +576,11 @@
-
- if (S_ISCHR(e->mode) || (S_ISBLK(e->mode))) {
- /* major/minor numbers can be as high as 2^12 or 4096 */
-- snprintf(info, 10, "%4d,%4d", major(e->size), minor(e->size));
-+ snprintf(info, 11, "%4d,%4d", major(e->size), minor(e->size));
- }
- else {
- /* size be as high as 2^24 or 16777216 */
-- snprintf(info, 10, "%9d", e->size);
-+ snprintf(info, 11, "%9d", e->size);
- }
-
- printf("%c %04o %s %5d:%-3d %s\n",
-@@ -462,17 +596,9 @@
- {
- int stack_entries = 0;
- int stack_size = 64;
-- struct entry **entry_stack;
--
-- entry_stack = malloc(stack_size * sizeof(struct entry *));
-- if (!entry_stack) {
-- die(MKFS_ERROR, 1, "malloc failed");
-- }
--
-- if (opt_verbose) {
-- printf("root:\n");
-- }
-+ struct entry **entry_stack = NULL;
-
-+ entry_stack = xmalloc(stack_size * sizeof(struct entry *));
- for (;;) {
- int dir_start = stack_entries;
- while (entry) {
-@@ -506,10 +632,7 @@
- if (entry->child) {
- if (stack_entries >= stack_size) {
- stack_size *= 2;
-- entry_stack = realloc(entry_stack, stack_size * sizeof(struct entry *));
-- if (!entry_stack) {
-- die(MKFS_ERROR, 1, "realloc failed");
-- }
-+ entry_stack = xrealloc(entry_stack, stack_size * sizeof(struct entry *));
- }
- entry_stack[stack_entries] = entry;
- stack_entries++;
-@@ -543,7 +666,7 @@
-
- set_data_offset(entry, base, offset);
- if (opt_verbose) {
-- printf("%s:\n", entry->name);
-+ printf("'%s':\n", entry->name);
- }
- entry = entry->child;
- }
-@@ -553,16 +676,21 @@
-
- static int is_zero(char const *begin, unsigned len)
- {
-- /* Returns non-zero iff the first LEN bytes from BEGIN are all NULs. */
-- return (len-- == 0 ||
-- (begin[0] == '\0' &&
-- (len-- == 0 ||
-- (begin[1] == '\0' &&
-- (len-- == 0 ||
-- (begin[2] == '\0' &&
-- (len-- == 0 ||
-- (begin[3] == '\0' &&
-- memcmp(begin, begin + 4, len) == 0))))))));
-+ if (opt_holes)
-+ /* Returns non-zero iff the first LEN bytes from BEGIN are
-+ all NULs. */
-+ return (len-- == 0 ||
-+ (begin[0] == '\0' &&
-+ (len-- == 0 ||
-+ (begin[1] == '\0' &&
-+ (len-- == 0 ||
-+ (begin[2] == '\0' &&
-+ (len-- == 0 ||
-+ (begin[3] == '\0' &&
-+ memcmp(begin, begin + 4, len) == 0))))))));
-+ else
-+ /* Never create holes. */
-+ return 0;
- }
-
- /*
-@@ -575,37 +703,34 @@
- * Note that size > 0, as a zero-sized file wouldn't ever
- * have gotten here in the first place.
- */
--static unsigned int do_compress(char *base, unsigned int offset, char const *name, char *uncompressed, unsigned int size)
-+static unsigned int do_compress(char *base, unsigned int offset, struct entry *entry)
- {
-+ unsigned int size = entry->size;
- unsigned long original_size = size;
- unsigned long original_offset = offset;
- unsigned long new_size;
- unsigned long blocks = (size - 1) / blksize + 1;
- unsigned long curr = offset + 4 * blocks;
- int change;
-+ char *uncompressed = entry->uncompressed;
-
-- total_blocks += blocks;
-+ total_blocks += blocks;
-
- do {
- unsigned long len = 2 * blksize;
- unsigned int input = size;
-- int err;
--
- if (input > blksize)
- input = blksize;
- size -= input;
-- if (!(opt_holes && is_zero (uncompressed, input))) {
-- err = compress2(base + curr, &len, uncompressed, input, Z_BEST_COMPRESSION);
-- if (err != Z_OK) {
-- die(MKFS_ERROR, 0, "compression error: %s", zError(err));
-- }
-+ if (!is_zero (uncompressed, input)) {
-+ compress(base + curr, &len, uncompressed, input);
- curr += len;
- }
- uncompressed += input;
-
- if (len > blksize*2) {
- /* (I don't think this can happen with zlib.) */
-- die(MKFS_ERROR, 0, "AIEEE: block \"compressed\" to > 2*blocklength (%ld)", len);
-+ error_msg_and_die("AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n", len);
- }
-
- *(u32 *) (base + offset) = curr;
-@@ -618,10 +743,12 @@
- st_blocks * 512. But if you say that then perhaps
- administrative data should also be included in both. */
- change = new_size - original_size;
-- if (opt_verbose > 1) {
-- printf("%6.2f%% (%+d bytes)\t%s\n",
-- (change * 100) / (double) original_size, change, name);
-+#if 0
-+ if (opt_verbose) {
-+ printf("%6.2f%% (%+d bytes)\t%s\n",
-+ (change * 100) / (double) original_size, change, entry->name);
- }
-+#endif
-
- return curr;
- }
-@@ -644,7 +771,7 @@
- set_data_offset(entry, base, offset);
- entry->offset = offset;
- map_entry(entry);
-- offset = do_compress(base, offset, entry->name, entry->uncompressed, entry->size);
-+ offset = do_compress(base, offset, entry);
- unmap_entry(entry);
- }
- }
-@@ -660,13 +787,10 @@
- int fd;
- char *buf;
-
-- fd = open(file, O_RDONLY);
-- if (fd < 0) {
-- die(MKFS_ERROR, 1, "open failed: %s", file);
-- }
-+ fd = xopen(file, O_RDONLY, 0);
- buf = mmap(NULL, image_length, PROT_READ, MAP_PRIVATE, fd, 0);
- if (buf == MAP_FAILED) {
-- die(MKFS_ERROR, 1, "mmap failed");
-+ error_msg_and_die("mmap failed");
- }
- memcpy(base + offset, buf, image_length);
- munmap(buf, image_length);
-@@ -679,6 +803,328 @@
- return (offset + image_length);
- }
-
-+static struct entry *find_filesystem_entry(struct entry *dir, char *name, mode_t type)
-+{
-+ struct entry *e = dir;
-+
-+ if (S_ISDIR(dir->mode)) {
-+ e = dir->child;
-+ }
-+ while (e) {
-+ /* Only bother to do the expensive strcmp on matching file types */
-+ if (type == (e->mode & S_IFMT) && e->name) {
-+ if (S_ISDIR(e->mode)) {
-+ int len = strlen(e->name);
-+
-+ /* Check if we are a parent of the correct path */
-+ if (strncmp(e->name, name, len) == 0) {
-+ /* Is this an _exact_ match? */
-+ if (strcmp(name, e->name) == 0) {
-+ return (e);
-+ }
-+ /* Looks like we found a parent of the correct path */
-+ if (name[len] == '/') {
-+ if (e->child) {
-+ return (find_filesystem_entry (e, name + len + 1, type));
-+ } else {
-+ return NULL;
-+ }
-+ }
-+ }
-+ } else {
-+ if (strcmp(name, e->name) == 0) {
-+ return (e);
-+ }
-+ }
-+ }
-+ e = e->next;
-+ }
-+ return (NULL);
-+}
-+
-+void modify_entry(char *full_path, unsigned long uid, unsigned long gid,
-+ unsigned long mode, unsigned long rdev, struct entry *root, loff_t *fslen_ub)
-+{
-+ char *name, *path, *full;
-+ struct entry *curr, *parent, *entry, *prev;
-+
-+ full = xstrdup(full_path);
-+ path = xstrdup(dirname(full));
-+ name = full_path + strlen(path) + 1;
-+ free(full);
-+ if (strcmp(path, "/") == 0) {
-+ parent = root;
-+ name = full_path + 1;
-+ } else {
-+ if (!(parent = find_filesystem_entry(root, path+1, S_IFDIR)))
-+ error_msg_and_die("%s/%s: could not find parent\n", path, name);
-+ }
-+ if ((entry = find_filesystem_entry(parent, name, (mode & S_IFMT)))) {
-+ /* its there, just modify permissions */
-+ entry->mode = mode;
-+ entry->uid = uid;
-+ entry->gid = gid;
-+ } else { /* make a new entry */
-+
-+ /* code partially replicated from parse_directory() */
-+ size_t namelen;
-+ if (S_ISREG(mode)) {
-+ error_msg_and_die("%s: regular file from device_table file must exist on disk!", full_path);
-+ }
-+
-+ namelen = strlen(name);
-+ if (namelen > MAX_INPUT_NAMELEN) {
-+ error_msg_and_die(
-+ "Very long (%u bytes) filename `%s' found.\n"
-+ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n",
-+ namelen, name);
-+ }
-+ entry = xcalloc(1, sizeof(struct entry));
-+ entry->name = xstrdup(name);
-+ /* truncate multi-byte UTF-8 filenames on character boundary */
-+ if (namelen > CRAMFS_MAXPATHLEN) {
-+ namelen = CRAMFS_MAXPATHLEN;
-+ warn_namelen = 1;
-+ /* the first lost byte must not be a trail byte */
-+ while ((entry->name[namelen] & 0xc0) == 0x80) {
-+ namelen--;
-+ /* are we reasonably certain it was UTF-8 ? */
-+ if (entry->name[namelen] < 0x80 || !namelen) {
-+ error_msg_and_die("cannot truncate filenames not encoded in UTF-8");
-+ }
-+ }
-+ entry->name[namelen] = '\0';
-+ }
-+ entry->mode = mode;
-+ entry->uid = uid;
-+ entry->gid = gid;
-+ entry->size = 0;
-+ if (S_ISBLK(mode) || S_ISCHR(mode)) {
-+ entry->size = rdev;
-+ if (entry->size & -(1<<CRAMFS_SIZE_WIDTH))
-+ warn_dev = 1;
-+ }
-+
-+ /* ok, now we have to backup and correct the size of all the entries above us */
-+ *fslen_ub += sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
-+ parent->size += sizeof(struct cramfs_inode) + ((namelen + 3) & ~3);
-+
-+ /* alright, time to link us in */
-+ curr = parent->child;
-+ prev = NULL;
-+ while (curr && strcmp(name, curr->name) > 0) {
-+ prev = curr;
-+ curr = curr->next;
-+ }
-+ if (!prev) parent->child = entry;
-+ else prev->next = entry;
-+ entry->next = curr;
-+ entry->child = NULL;
-+ }
-+ if (entry->uid >= 1 << CRAMFS_UID_WIDTH)
-+ warn_uid = 1;
-+ if (entry->gid >= 1 << CRAMFS_GID_WIDTH) {
-+ /* TODO: We ought to replace with a default
-+ gid instead of truncating; otherwise there
-+ are security problems. Maybe mode should
-+ be &= ~070. Same goes for uid once Linux
-+ supports >16-bit uids. */
-+ warn_gid = 1;
-+ }
-+ free(path);
-+}
-+
-+/* the GNU C library has a wonderful scanf("%as", string) which will
-+ allocate the string with the right size, good to avoid buffer overruns.
-+ the following macros use it if available or use a hacky workaround...
-+ */
-+
-+#ifdef __GNUC__
-+#define SCANF_PREFIX "a"
-+#define SCANF_STRING(s) (&s)
-+#define GETCWD_SIZE 0
-+#else
-+#define SCANF_PREFIX "511"
-+#define SCANF_STRING(s) (s = xmalloc(512))
-+#define GETCWD_SIZE -1
-+inline int snprintf(char *str, size_t n, const char *fmt, ...)
-+{
-+ int ret;
-+ va_list ap;
-+
-+ va_start(ap, fmt);
-+ ret = vsprintf(str, fmt, ap);
-+ va_end(ap);
-+ return ret;
-+}
-+#endif
-+
-+/* device table entries take the form of:
-+ <path> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+ /dev/mem c 640 0 0 1 1 0 0 -
-+
-+ type can be one of:
-+ f A regular file
-+ d Directory
-+ c Character special device file
-+ b Block special device file
-+ p Fifo (named pipe)
-+
-+ I don't bother with symlinks (permissions are irrelevant), hard
-+ links (special cases of regular files), or sockets (why bother).
-+
-+ Regular files must exist in the target root directory. If a char,
-+ block, fifo, or directory does not exist, it will be created.
-+*/
-+
-+static int interpret_table_entry(char *line, struct entry *root, loff_t *fslen_ub)
-+{
-+ char type, *name = NULL;
-+ unsigned long mode = 0755, uid = 0, gid = 0, major = 0, minor = 0;
-+ unsigned long start = 0, increment = 1, count = 0;
-+
-+ if (sscanf (line, "%" SCANF_PREFIX "s %c %lo %lu %lu %lu %lu %lu %lu %lu",
-+ SCANF_STRING(name), &type, &mode, &uid, &gid, &major, &minor,
-+ &start, &increment, &count) < 0)
-+ {
-+ return 1;
-+ }
-+
-+ if (!strcmp(name, "/")) {
-+ error_msg_and_die("Device table entries require absolute paths");
-+ }
-+
-+ switch (type) {
-+ case 'd':
-+ mode |= S_IFDIR;
-+ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
-+ break;
-+ case 'f':
-+ mode |= S_IFREG;
-+ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
-+ break;
-+ case 'p':
-+ mode |= S_IFIFO;
-+ modify_entry(name, uid, gid, mode, 0, root, fslen_ub);
-+ break;
-+ case 'c':
-+ case 'b':
-+ mode |= (type == 'c') ? S_IFCHR : S_IFBLK;
-+ if (count > 0) {
-+ char *buf;
-+ unsigned long i;
-+ dev_t rdev;
-+
-+ for (i = start; i < count; i++) {
-+ asprintf(&buf, "%s%lu", name, i);
-+ rdev = makedev(major, minor + (i * increment - start));
-+ modify_entry(buf, uid, gid, mode, rdev, root, fslen_ub);
-+ free(buf);
-+ }
-+ } else {
-+ dev_t rdev = makedev(major, minor);
-+ modify_entry(name, uid, gid, mode, rdev, root, fslen_ub);
-+ }
-+ break;
-+ default:
-+ error_msg_and_die("Unsupported file type");
-+ }
-+ free(name);
-+ return 0;
-+}
-+
-+static int parse_device_table(FILE *file, struct entry *root, loff_t *fslen_ub)
-+{
-+ char *line;
-+ int status = 0;
-+ size_t length = 0;
-+
-+ /* Turn off squash, since we must ensure that values
-+ * entered via the device table are not squashed */
-+ opt_squash = 0;
-+
-+ /* Looks ok so far. The general plan now is to read in one
-+ * line at a time, check for leading comment delimiters ('#'),
-+ * then try and parse the line as a device table. If we fail
-+ * to parse things, try and help the poor fool to fix their
-+ * device table with a useful error msg... */
-+ line = NULL;
-+ while (getline(&line, &length, file) != -1) {
-+ /* First trim off any whitespace */
-+ int len = strlen(line);
-+
-+ /* trim trailing whitespace */
-+ while (len > 0 && isspace(line[len - 1]))
-+ line[--len] = '\0';
-+ /* trim leading whitespace */
-+ memmove(line, &line[strspn(line, " \n\r\t\v")], len);
-+
-+ /* How long are we after trimming? */
-+ len = strlen(line);
-+
-+ /* If this is NOT a comment line, try to interpret it */
-+ if (len && *line != '#') {
-+ if (interpret_table_entry(line, root, fslen_ub))
-+ status = 1;
-+ }
-+
-+ free(line);
-+ line = NULL;
-+ }
-+ free(line);
-+ fclose(file);
-+
-+ return status;
-+}
-+
-+void traverse(struct entry *entry, int depth)
-+{
-+ struct entry *curr = entry;
-+ int i;
-+
-+ while (curr) {
-+ for (i = 0; i < depth; i++) putchar(' ');
-+ printf("%s: size=%d mode=%d same=%p\n",
-+ (curr->name)? (char*)curr->name : "/",
-+ curr->size, curr->mode, curr->same);
-+ if (curr->child) traverse(curr->child, depth + 4);
-+ curr = curr->next;
-+ }
-+}
-+
-+static void free_filesystem_entry(struct entry *dir)
-+{
-+ struct entry *e = dir, *last;
-+
-+ if (S_ISDIR(dir->mode)) {
-+ e = dir->child;
-+ }
-+ while (e) {
-+ if (e->name)
-+ free(e->name);
-+ if (e->path)
-+ free(e->path);
-+ if (e->uncompressed)
-+ free(e->uncompressed);
-+ last = e;
-+ if (e->child) {
-+ free_filesystem_entry(e);
-+ }
-+ e = e->next;
-+ free(last);
-+ }
-+}
-+
-+
-+/*
-+ * Usage:
-+ *
-+ * mkcramfs directory-name outfile
-+ *
-+ * where "directory-name" is simply the root of the directory
-+ * tree that we want to generate a compressed filesystem out
-+ * of.
-+ */
- int main(int argc, char **argv)
- {
- struct stat st; /* used twice... */
-@@ -692,6 +1138,7 @@
- u32 crc;
- int c; /* for getopt */
- char *ep; /* for strtoul */
-+ FILE *devtable = NULL;
-
- total_blocks = 0;
-
-@@ -699,7 +1146,7 @@
- progname = argv[0];
-
- /* command line options */
-- while ((c = getopt(argc, argv, "hEe:i:n:psvz")) != EOF) {
-+ while ((c = getopt(argc, argv, "hEe:i:n:psvzD:q")) != EOF) {
- switch (c) {
- case 'h':
- usage(MKFS_OK);
-@@ -715,7 +1162,7 @@
- case 'i':
- opt_image = optarg;
- if (lstat(opt_image, &st) < 0) {
-- die(MKFS_ERROR, 1, "lstat failed: %s", opt_image);
-+ error_msg_and_die("lstat failed: %s", opt_image);
- }
- image_length = st.st_size; /* may be padded later */
- fslen_ub += (image_length + 3); /* 3 is for padding */
-@@ -736,6 +1183,16 @@
- case 'z':
- opt_holes = 1;
- break;
-+ case 'q':
-+ opt_squash = 1;
-+ break;
-+ case 'D':
-+ devtable = xfopen(optarg, "r");
-+ if (fstat(fileno(devtable), &st) < 0)
-+ perror_msg_and_die(optarg);
-+ if (st.st_size < 10)
-+ error_msg_and_die("%s: not a proper device table file\n", optarg);
-+ break;
- }
- }
-
-@@ -745,25 +1202,23 @@
- outfile = argv[optind + 1];
-
- if (stat(dirname, &st) < 0) {
-- die(MKFS_USAGE, 1, "stat failed: %s", dirname);
-- }
-- fd = open(outfile, O_WRONLY | O_CREAT | O_TRUNC, 0666);
-- if (fd < 0) {
-- die(MKFS_USAGE, 1, "open failed: %s", outfile);
-+ error_msg_and_die("stat failed: %s", dirname);
- }
-+ fd = xopen(outfile, O_WRONLY | O_CREAT | O_TRUNC, 0666);
-
-- root_entry = calloc(1, sizeof(struct entry));
-- if (!root_entry) {
-- die(MKFS_ERROR, 1, "calloc failed");
-- }
-+ root_entry = xcalloc(1, sizeof(struct entry));
- root_entry->mode = st.st_mode;
- root_entry->uid = st.st_uid;
- root_entry->gid = st.st_gid;
-
- root_entry->size = parse_directory(root_entry, dirname, &root_entry->child, &fslen_ub);
-
-+ if (devtable) {
-+ parse_device_table(devtable, root_entry, &fslen_ub);
-+ }
-+
- /* always allocate a multiple of blksize bytes because that's
-- what we're going to write later on */
-+ what we're going to write later on */
- fslen_ub = ((fslen_ub - 1) | (blksize - 1)) + 1;
-
- if (fslen_ub > MAXFSLEN) {
-@@ -790,7 +1245,7 @@
- rom_image = mmap(NULL, fslen_ub?fslen_ub:1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-
- if (rom_image == MAP_FAILED) {
-- die(MKFS_ERROR, 1, "mmap failed");
-+ error_msg_and_die("mmap failed");
- }
-
- /* Skip the first opt_pad bytes for boot loader code */
-@@ -807,6 +1262,7 @@
- }
-
- offset = write_directory_structure(root_entry->child, rom_image, offset);
-+ if (opt_verbose)
- printf("Directory data: %d bytes\n", offset);
-
- offset = write_data(root_entry, rom_image, offset);
-@@ -814,30 +1270,38 @@
- /* We always write a multiple of blksize bytes, so that
- losetup works. */
- offset = ((offset - 1) | (blksize - 1)) + 1;
-+ if (opt_verbose)
- printf("Everything: %d kilobytes\n", offset >> 10);
-
- /* Write the superblock now that we can fill in all of the fields. */
- write_superblock(root_entry, rom_image+opt_pad, offset);
-+ if (opt_verbose)
- printf("Super block: %d bytes\n", sizeof(struct cramfs_super));
-
- /* Put the checksum in. */
- crc = crc32(0L, Z_NULL, 0);
- crc = crc32(crc, (rom_image+opt_pad), (offset-opt_pad));
- ((struct cramfs_super *) (rom_image+opt_pad))->fsid.crc = crc;
-+ if (opt_verbose)
- printf("CRC: %x\n", crc);
-
- /* Check to make sure we allocated enough space. */
- if (fslen_ub < offset) {
-- die(MKFS_ERROR, 0, "not enough space allocated for ROM image (%Ld allocated, %d used)", fslen_ub, offset);
-+ error_msg_and_die("not enough space allocated for ROM "
-+ "image (%Ld allocated, %d used)", fslen_ub, offset);
- }
-
- written = write(fd, rom_image, offset);
- if (written < 0) {
-- die(MKFS_ERROR, 1, "write failed");
-+ error_msg_and_die("write failed");
- }
- if (offset != written) {
-- die(MKFS_ERROR, 0, "ROM image write failed (wrote %d of %d bytes)", written, offset);
-+ error_msg_and_die("ROM image write failed (wrote %d of %d bytes)", written, offset);
- }
-+
-+ /* Free up memory */
-+ free_filesystem_entry(root_entry);
-+ free(root_entry);
-
- /* (These warnings used to come at the start, but they scroll off the
- screen too quickly.) */
diff --git a/obsolete-buildroot/sources/device_table.txt b/obsolete-buildroot/sources/device_table.txt
deleted file mode 100644
index 75d806835..000000000
--- a/obsolete-buildroot/sources/device_table.txt
+++ /dev/null
@@ -1,163 +0,0 @@
-# When building a target filesystem, it is desirable to not have to
-# become root and then run 'mknod' a thousand times. Using a device
-# table you can create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs. You can
-# do all sorts of interesting things with a device table file. For
-# example, if you want to adjust the permissions on a particular file
-# you can just add an entry like:
-# /sbin/foobar f 2755 0 0 - - - - -
-# and (assuming the file /sbin/foobar exists) it will be made setuid
-# root (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-# I could just use the following two table entries:
-# /dev/hda b 640 0 0 3 0 0 0 -
-# /dev/hda b 640 0 0 3 1 1 1 15
-#
-# Device table entries take the form of:
-# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-# where name is the file name, type can be one of:
-# f A regular file
-# d Directory
-# c Character special device file
-# b Block special device file
-# p Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the
-# target file. The rest of the entries (major, minor, etc) apply only
-# to device special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/dev d 755 0 0 - - - - -
-/dev d 755 0 0 - - - - -
-/dev/pts d 755 0 0 - - - - -
-/tmp d 1777 0 0 - - - - -
-/etc d 755 0 0 - - - - -
-/home/default d 2755 1000 1000 - - - - -
-/etc/network/if-up.d d 755 0 0 - - - - -
-/etc/network/if-pre-up.d d 755 0 0 - - - - -
-/etc/network/if-down.d d 755 0 0 - - - - -
-/etc/network/if-post-down.d d 755 0 0 - - - - -
-# Adjust permissions on some normal files
-/etc/shadow f 600 0 0 - - - - -
-/etc/passwd f 644 0 0 - - - - -
-/bin/busybox f 4755 0 0 - - - - -
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
-
-# Normal system devices
-/dev/mem c 640 0 0 1 1 0 0 -
-/dev/kmem c 640 0 0 1 2 0 0 -
-/dev/null c 666 0 0 1 3 0 0 -
-/dev/zero c 666 0 0 1 5 0 0 -
-/dev/random c 666 0 0 1 8 0 0 -
-/dev/urandom c 666 0 0 1 9 0 0 -
-/dev/ram b 640 0 0 1 1 0 0 -
-/dev/ram b 640 0 0 1 0 0 1 4
-/dev/loop b 640 0 0 7 0 0 1 2
-/dev/rtc c 640 0 0 10 135 - - -
-/dev/console c 666 0 0 5 1 - - -
-/dev/tty c 666 0 0 5 0 - - -
-/dev/tty c 666 0 0 4 0 0 1 8
-/dev/ttyp c 666 0 0 3 0 0 1 10
-/dev/ptyp c 666 0 0 2 0 0 1 10
-/dev/ptmx c 666 0 0 5 2 - - -
-/dev/ttyP c 666 0 0 57 0 0 1 4
-/dev/ttyS c 666 0 0 4 64 0 1 4
-/dev/fb c 640 0 5 29 0 0 32 4
-#/dev/ttySA c 666 0 0 204 5 0 1 3
-/dev/psaux c 666 0 0 10 1 0 0 -
-#/dev/ppp c 666 0 0 108 0 - - -
-
-# MTD stuff
-/dev/mtd c 640 0 0 90 0 0 2 4
-/dev/mtdblock b 640 0 0 31 0 0 1 4
-
-#Tun/tap driver
-/dev/net d 755 0 0 - - - - -
-/dev/net/tun c 660 0 0 10 200 - - -
-
-# Audio stuff
-#/dev/audio c 666 0 29 14 4 - - -
-#/dev/audio1 c 666 0 29 14 20 - - -
-#/dev/dsp c 666 0 29 14 3 - - -
-#/dev/dsp1 c 666 0 29 14 19 - - -
-#/dev/sndstat c 666 0 29 14 6 - - -
-
-# User-mode Linux stuff
-/dev/ubda b 640 0 0 98 0 0 0 -
-/dev/ubda b 640 0 0 98 1 1 1 15
-
-# IDE Devices
-/dev/hda b 640 0 0 3 0 0 0 -
-/dev/hda b 640 0 0 3 1 1 1 15
-/dev/hdb b 640 0 0 3 64 0 0 -
-/dev/hdb b 640 0 0 3 65 1 1 15
-#/dev/hdc b 640 0 0 22 0 0 0 -
-#/dev/hdc b 640 0 0 22 1 1 1 15
-#/dev/hdd b 640 0 0 22 64 0 0 -
-#/dev/hdd b 640 0 0 22 65 1 1 15
-#/dev/hde b 640 0 0 33 0 0 0 -
-#/dev/hde b 640 0 0 33 1 1 1 15
-#/dev/hdf b 640 0 0 33 64 0 0 -
-#/dev/hdf b 640 0 0 33 65 1 1 15
-#/dev/hdg b 640 0 0 34 0 0 0 -
-#/dev/hdg b 640 0 0 34 1 1 1 15
-#/dev/hdh b 640 0 0 34 64 0 0 -
-#/dev/hdh b 640 0 0 34 65 1 1 15
-
-# SCSI Devices
-#/dev/sda b 640 0 0 8 0 0 0 -
-#/dev/sda b 640 0 0 8 1 1 1 15
-#/dev/sdb b 640 0 0 8 16 0 0 -
-#/dev/sdb b 640 0 0 8 17 1 1 15
-#/dev/sdc b 640 0 0 8 32 0 0 -
-#/dev/sdc b 640 0 0 8 33 1 1 15
-#/dev/sdd b 640 0 0 8 48 0 0 -
-#/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
-#/dev/sg c 640 0 0 21 0 0 1 15
-#/dev/scd b 640 0 0 11 0 0 1 15
-#/dev/st c 640 0 0 9 0 0 1 8
-#/dev/nst c 640 0 0 9 128 0 1 8
-#/dev/st c 640 0 0 9 32 1 1 4
-#/dev/st c 640 0 0 9 64 1 1 4
-#/dev/st c 640 0 0 9 96 1 1 4
-
-# Floppy disk devices
-#/dev/fd b 640 0 0 2 0 0 1 2
-#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd b 640 0 0 29 0 0 0 -
-#/dev/bpcd b 640 0 0 41 0 0 0 -
-#/dev/capi20 c 640 0 0 68 0 0 1 2
-#/dev/cdu31a b 640 0 0 15 0 0 0 -
-#/dev/cdu535 b 640 0 0 24 0 0 0 -
-#/dev/cm206cd b 640 0 0 32 0 0 0 -
-#/dev/sjcd b 640 0 0 18 0 0 0 -
-#/dev/sonycd b 640 0 0 15 0 0 0 -
-#/dev/gscd b 640 0 0 16 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 1 4
-#/dev/mcd b 640 0 0 23 0 0 0 -
-#/dev/optcd b 640 0 0 17 0 0 0 -
-
diff --git a/obsolete-buildroot/sources/dnsmasq1-openwrt.patch b/obsolete-buildroot/sources/dnsmasq1-openwrt.patch
deleted file mode 100644
index e1741a28a..000000000
--- a/obsolete-buildroot/sources/dnsmasq1-openwrt.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-diff -x CVS -urN dnsmasq-1.18/dhcp.c dnsmasq.old/dhcp.c
---- dnsmasq-1.18/dhcp.c 2003-11-05 08:30:20.000000000 -0600
-+++ dnsmasq.old/dhcp.c 2004-01-05 23:40:11.000000000 -0600
-@@ -15,14 +15,20 @@
-
- #include "dnsmasq.h"
-
--static int next_token (char *token, int buffsize, FILE * fp);
-+struct dhcpOfferedAddr {
-+ u_int8_t hostname[16];
-+ u_int8_t chaddr[16];
-+ u_int32_t yiaddr; /* network order */
-+ u_int32_t expires; /* host order */
-+};
-
- void load_dhcp(char *file, char *suffix, time_t now, char *hostname)
- {
-- char token[MAXTOK], *dot;
-+ char *dot;
- struct all_addr host_address;
-- time_t ttd, tts;
-+ time_t ttd;
- FILE *fp = fopen (file, "r");
-+ struct dhcpOfferedAddr lease;
-
- if (!fp)
- {
-@@ -34,154 +40,45 @@
-
- /* remove all existing DHCP cache entries */
- cache_unhash_dhcp();
--
-- while ((next_token(token, MAXTOK, fp)))
-- {
-- if (strcmp(token, "lease") == 0)
-- {
-- hostname[0] = '\0';
-- ttd = tts = (time_t)(-1);
--#ifdef HAVE_IPV6
-- if (next_token(token, MAXTOK, fp) &&
-- inet_pton(AF_INET, token, &host_address))
--#else
-- if (next_token(token, MAXTOK, fp) &&
-- (host_address.addr4.s_addr = inet_addr(token)) != (in_addr_t) -1)
--#endif
-- {
-- if (next_token(token, MAXTOK, fp) && *token == '{')
-- {
-- while (next_token(token, MAXTOK, fp) && *token != '}')
-+
-+ while (fread(&lease, sizeof(lease), 1, fp)) {
-+ host_address.addr.addr4.s_addr = lease.yiaddr;
-+
-+ strcpy(hostname,lease.hostname);
-+ if (lease.expires>(unsigned)now)
-+ ttd = lease.expires;
-+ else
-+ ttd = -1;
-+ dot = strchr(hostname, '.');
-+ if (suffix)
- {
-- if ((strcmp(token, "client-hostname") == 0) ||
-- (strcmp(token, "hostname") == 0))
-- {
-- if (next_token(hostname, MAXDNAME, fp))
-- if (!canonicalise(hostname))
-- {
-- *hostname = 0;
-- syslog(LOG_ERR, "bad name in %s", file);
-- }
-- }
-- else if ((strcmp(token, "ends") == 0) ||
-- (strcmp(token, "starts") == 0))
-- {
-- struct tm lease_time;
-- int is_ends = (strcmp(token, "ends") == 0);
-- if (next_token(token, MAXTOK, fp) && /* skip weekday */
-- next_token(token, MAXTOK, fp) && /* Get date from lease file */
-- sscanf (token, "%d/%d/%d",
-- &lease_time.tm_year,
-- &lease_time.tm_mon,
-- &lease_time.tm_mday) == 3 &&
-- next_token(token, MAXTOK, fp) &&
-- sscanf (token, "%d:%d:%d:",
-- &lease_time.tm_hour,
-- &lease_time.tm_min,
-- &lease_time.tm_sec) == 3)
-- {
-- /* There doesn't seem to be a universally available library function
-- which converts broken-down _GMT_ time to seconds-in-epoch.
-- The following was borrowed from ISC dhcpd sources, where
-- it is noted that it might not be entirely accurate for odd seconds.
-- Since we're trying to get the same answer as dhcpd, that's just
-- fine here. */
-- static int months [11] = { 31, 59, 90, 120, 151, 181,
-- 212, 243, 273, 304, 334 };
-- time_t time = ((((((365 * (lease_time.tm_year - 1970) + /* Days in years since '70 */
-- (lease_time.tm_year - 1969) / 4 + /* Leap days since '70 */
-- (lease_time.tm_mon > 1 /* Days in months this year */
-- ? months [lease_time.tm_mon - 2]
-- : 0) +
-- (lease_time.tm_mon > 2 && /* Leap day this year */
-- !((lease_time.tm_year - 1972) & 3)) +
-- lease_time.tm_mday - 1) * 24) + /* Day of month */
-- lease_time.tm_hour) * 60) +
-- lease_time.tm_min) * 60) + lease_time.tm_sec;
-- if (is_ends)
-- ttd = time;
-- else
-- tts = time; }
-+ if (dot)
-+ { /* suffix and lease has ending: must match */
-+ if (strcmp(dot+1, suffix) != 0)
-+ syslog(LOG_WARNING,
-+ "Ignoring DHCP lease for %s because it has an illegal domain part", hostname);
-+ else
-+ cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
- }
-- }
--
-- /* missing info? */
-- if (!*hostname)
-- continue;
-- if (ttd == (time_t)(-1))
-- continue;
--
-- /* infinite lease to is represented by -1 */
-- /* This makes is to the lease file as
-- start time one less than end time. */
-- /* We use -1 as infinite in ttd */
-- if ((tts != -1) && (ttd == tts - 1))
-- ttd = (time_t)(-1);
-- else if (ttd < now)
-- continue;
--
-- dot = strchr(hostname, '.');
-- if (suffix)
-- {
-- if (dot)
-- { /* suffix and lease has ending: must match */
-- if (strcmp(dot+1, suffix) != 0)
-- syslog(LOG_WARNING,
-- "Ignoring DHCP lease for %s because it has an illegal domain part", hostname);
-- else
-- cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-- }
-- else
-- { /* suffix exists but lease has no ending - add lease and lease.suffix */
-- cache_add_dhcp_entry(hostname, &host_address, ttd, 0);
-- strncat(hostname, ".", MAXDNAME);
-- strncat(hostname, suffix, MAXDNAME);
-- hostname[MAXDNAME-1] = 0; /* in case strncat hit limit */
-- /* Make FQDN canonical for reverse lookups */
-- cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-- }
-- }
-- else
-- { /* no suffix */
-- if (dot) /* no lease ending allowed */
-- syslog(LOG_WARNING,
-- "Ignoring DHCP lease for %s because it has a domain part", hostname);
-- else
-- cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-- }
-- }
-- }
-- }
-- }
-+ else
-+ { /* suffix exists but lease has no ending - add lease and lease.suffix */
-+ cache_add_dhcp_entry(hostname, &host_address, ttd, 0);
-+ strncat(hostname, ".", MAXDNAME);
-+ strncat(hostname, suffix, MAXDNAME);
-+ hostname[MAXDNAME-1] = 0; /* in case strncat hit limit */
-+ /* Make FQDN canonical for reverse lookups */
-+ cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-+ }
-+ }
-+ else
-+ { /* no suffix */
-+ if (dot) /* no lease ending allowed */
-+ syslog(LOG_WARNING,
-+ "Ignoring DHCP lease for %s because it has a domain part", hostname);
-+ else
-+ cache_add_dhcp_entry(hostname, &host_address, ttd, F_REVERSE);
-+ }
-+ }
- fclose(fp);
-
- }
--
--static int next_token (char *token, int buffsize, FILE * fp)
--{
-- int c, count = 0;
-- char *cp = token;
--
-- while((c = getc(fp)) != EOF)
-- {
-- if (c == '#')
-- do { c = getc(fp); } while (c != '\n' && c != EOF);
--
-- if (c == ' ' || c == '\t' || c == '\n' || c == ';')
-- {
-- if (count)
-- break;
-- }
-- else if ((c != '"') && (count<buffsize-1))
-- {
-- *cp++ = c;
-- count++;
-- }
-- }
--
-- *cp = 0;
-- return count ? 1 : 0;
--}
--
--
--
diff --git a/obsolete-buildroot/sources/kernel-patches/001-patch-2.4.26-pre5.bz2 b/obsolete-buildroot/sources/kernel-patches/001-patch-2.4.26-pre5.bz2
deleted file mode 100644
index aa934c5a7..000000000
--- a/obsolete-buildroot/sources/kernel-patches/001-patch-2.4.26-pre5.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/006-ieee1394-hotplug.bz2 b/obsolete-buildroot/sources/kernel-patches/006-ieee1394-hotplug.bz2
deleted file mode 100644
index b8361ba35..000000000
--- a/obsolete-buildroot/sources/kernel-patches/006-ieee1394-hotplug.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/007-scsi_add_remove_single.bz2 b/obsolete-buildroot/sources/kernel-patches/007-scsi_add_remove_single.bz2
deleted file mode 100644
index 0d2ee20a9..000000000
--- a/obsolete-buildroot/sources/kernel-patches/007-scsi_add_remove_single.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/008-ieee1394-fix.bz2 b/obsolete-buildroot/sources/kernel-patches/008-ieee1394-fix.bz2
deleted file mode 100644
index d88f25134..000000000
--- a/obsolete-buildroot/sources/kernel-patches/008-ieee1394-fix.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/009-always-inline.bz2 b/obsolete-buildroot/sources/kernel-patches/009-always-inline.bz2
deleted file mode 100644
index 0838fedd6..000000000
--- a/obsolete-buildroot/sources/kernel-patches/009-always-inline.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/010-optimize-for-size.bz2 b/obsolete-buildroot/sources/kernel-patches/010-optimize-for-size.bz2
deleted file mode 100644
index 68c19d4bb..000000000
--- a/obsolete-buildroot/sources/kernel-patches/010-optimize-for-size.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/012-x86-check_gcc.bz2 b/obsolete-buildroot/sources/kernel-patches/012-x86-check_gcc.bz2
deleted file mode 100644
index f645dc1aa..000000000
--- a/obsolete-buildroot/sources/kernel-patches/012-x86-check_gcc.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/017-printk.bz2 b/obsolete-buildroot/sources/kernel-patches/017-printk.bz2
deleted file mode 100644
index da9997616..000000000
--- a/obsolete-buildroot/sources/kernel-patches/017-printk.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/018-slab-loop-init.bz2 b/obsolete-buildroot/sources/kernel-patches/018-slab-loop-init.bz2
deleted file mode 100644
index dfba2bae5..000000000
--- a/obsolete-buildroot/sources/kernel-patches/018-slab-loop-init.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/041-changeloop.patch.bz2 b/obsolete-buildroot/sources/kernel-patches/041-changeloop.patch.bz2
deleted file mode 100644
index 9e64eca6b..000000000
--- a/obsolete-buildroot/sources/kernel-patches/041-changeloop.patch.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/042-loopfixes.patch.bz2 b/obsolete-buildroot/sources/kernel-patches/042-loopfixes.patch.bz2
deleted file mode 100644
index 456ee6145..000000000
--- a/obsolete-buildroot/sources/kernel-patches/042-loopfixes.patch.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/044-streaming_io.bz2 b/obsolete-buildroot/sources/kernel-patches/044-streaming_io.bz2
deleted file mode 100644
index 4f453e182..000000000
--- a/obsolete-buildroot/sources/kernel-patches/044-streaming_io.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/062-silence-blk-queue.bz2 b/obsolete-buildroot/sources/kernel-patches/062-silence-blk-queue.bz2
deleted file mode 100644
index 84a9a05c7..000000000
--- a/obsolete-buildroot/sources/kernel-patches/062-silence-blk-queue.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/063-silence.kbd.patch.bz2 b/obsolete-buildroot/sources/kernel-patches/063-silence.kbd.patch.bz2
deleted file mode 100644
index 04c56d62b..000000000
--- a/obsolete-buildroot/sources/kernel-patches/063-silence.kbd.patch.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/064-shutup-md.bz2 b/obsolete-buildroot/sources/kernel-patches/064-shutup-md.bz2
deleted file mode 100644
index 944b12ace..000000000
--- a/obsolete-buildroot/sources/kernel-patches/064-shutup-md.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/079-jiffies64.bz2 b/obsolete-buildroot/sources/kernel-patches/079-jiffies64.bz2
deleted file mode 100644
index 1b6873d3e..000000000
--- a/obsolete-buildroot/sources/kernel-patches/079-jiffies64.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/089-no-touch-makedep.bz2 b/obsolete-buildroot/sources/kernel-patches/089-no-touch-makedep.bz2
deleted file mode 100644
index 2e413ccaf..000000000
--- a/obsolete-buildroot/sources/kernel-patches/089-no-touch-makedep.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/kernel-patches/100_VERSION.bz2 b/obsolete-buildroot/sources/kernel-patches/100_VERSION.bz2
deleted file mode 100644
index 54d2e6571..000000000
--- a/obsolete-buildroot/sources/kernel-patches/100_VERSION.bz2
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/linux.config b/obsolete-buildroot/sources/linux.config
deleted file mode 100644
index e33656a9f..000000000
--- a/obsolete-buildroot/sources/linux.config
+++ /dev/null
@@ -1,877 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_X86=y
-# CONFIG_SBUS is not set
-CONFIG_UID16=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor type and features
-#
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-CONFIG_MELAN=y
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_X86_L1_CACHE_SHIFT=4
-CONFIG_X86_USE_STRING_486=y
-CONFIG_X86_ALIGNMENT_16=y
-CONFIG_X86_F00F_WORKS_OK=y
-# CONFIG_X86_MCE is not set
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_MATH_EMULATION=y
-CONFIG_MTRR=y
-# CONFIG_SMP is not set
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_UP_IOAPIC is not set
-# CONFIG_X86_TSC_DISABLE is not set
-
-#
-# General setup
-#
-CONFIG_NET=y
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_ISA=y
-CONFIG_PCI_NAMES=y
-CONFIG_EISA=y
-CONFIG_MCA=y
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=m
-CONFIG_CARDBUS=y
-CONFIG_TCIC=y
-CONFIG_I82092=y
-CONFIG_I82365=y
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-CONFIG_PM=y
-CONFIG_APM=y
-# CONFIG_APM_IGNORE_USER_SUSPEND is not set
-CONFIG_APM_DO_ENABLE=y
-# CONFIG_APM_CPU_IDLE is not set
-# CONFIG_APM_DISPLAY_BLANK is not set
-CONFIG_APM_RTC_IS_GMT=y
-CONFIG_APM_ALLOW_INTS=y
-CONFIG_APM_REAL_MODE_POWER_OFF=y
-
-#
-# ACPI Support
-#
-# CONFIG_ACPI is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_PS2 is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_INET_ECN=y
-# CONFIG_SYN_COOKIES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_TFTP=y
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-CONFIG_IP_NF_MATCH_UNCLEAN=y
-CONFIG_IP_NF_MATCH_OWNER=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_MIRROR=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_NAT_LOCAL=y
-CONFIG_IP_NF_NAT_SNMP_BASIC=y
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_TARGET_ULOG=y
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-CONFIG_SCTP_HMAC_SHA1=y
-# CONFIG_SCTP_HMAC_MD5 is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-
-#
-#
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_CSZ=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_CLS_RSVP=y
-CONFIG_NET_CLS_RSVP6=y
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_IDEDISK_STROKE=y
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDEDMA_PCI_WIP=y
-# CONFIG_BLK_DEV_ADMA100 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_HPT34X_AUTODMA is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_PDC202XX_BURST is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_DMA_NONPCI is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_SKMC is not set
-# CONFIG_NE2_MCA is not set
-# CONFIG_IBMLANA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_HOSTAP=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOSTAP_PCI is not set
-
-#
-# Wireless Pcmcia cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_HOSTAP_CS=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-CONFIG_AMD_RNG=y
-# CONFIG_INTEL_RNG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_PCMCIA_SERIAL_CS is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_MWAVE is not set
-# CONFIG_OBMOUSE is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=y
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Console drivers
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_VIDEO_SELECT is not set
-# CONFIG_MDA_CONSOLE is not set
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_OPTIMIZE_FOR_SIZE=y
-CONFIG_CRC32=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_FW_LOADER is not set
diff --git a/obsolete-buildroot/sources/busybox.config b/obsolete-buildroot/sources/openwrt/busybox/busybox.config
index 2d7c51fb3..2d7c51fb3 100644
--- a/obsolete-buildroot/sources/busybox.config
+++ b/obsolete-buildroot/sources/openwrt/busybox/busybox.config
diff --git a/obsolete-buildroot/sources/busybox-openwrt-100-killall5.patch b/obsolete-buildroot/sources/openwrt/busybox/patches/100-killall5.patch
index 161b7e6f2..161b7e6f2 100644
--- a/obsolete-buildroot/sources/busybox-openwrt-100-killall5.patch
+++ b/obsolete-buildroot/sources/openwrt/busybox/patches/100-killall5.patch
diff --git a/obsolete-buildroot/sources/busybox-openwrt-110-telnetd.patch b/obsolete-buildroot/sources/openwrt/busybox/patches/110-telnetd.patch
index e95757ee4..e95757ee4 100644
--- a/obsolete-buildroot/sources/busybox-openwrt-110-telnetd.patch
+++ b/obsolete-buildroot/sources/openwrt/busybox/patches/110-telnetd.patch
diff --git a/obsolete-buildroot/sources/busybox-openwrt-130-resetmon.patch b/obsolete-buildroot/sources/openwrt/busybox/patches/130-resetmon.patch
index b41315e1f..b41315e1f 100644
--- a/obsolete-buildroot/sources/busybox-openwrt-130-resetmon.patch
+++ b/obsolete-buildroot/sources/openwrt/busybox/patches/130-resetmon.patch
diff --git a/obsolete-buildroot/sources/openssh.client.conffiles b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.conffiles
index cb3c639ba..cb3c639ba 100644
--- a/obsolete-buildroot/sources/openssh.client.conffiles
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.conffiles
diff --git a/obsolete-buildroot/sources/openssh.client.control b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.control
index 358525098..358525098 100644
--- a/obsolete-buildroot/sources/openssh.client.control
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.control
diff --git a/obsolete-buildroot/sources/openssh.client.ex.control b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.ex.control
index 5eb808a97..5eb808a97 100644
--- a/obsolete-buildroot/sources/openssh.client.ex.control
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.ex.control
diff --git a/obsolete-buildroot/sources/openssh.client.preinst b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.preinst
index 029c78978..029c78978 100644
--- a/obsolete-buildroot/sources/openssh.client.preinst
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.preinst
diff --git a/obsolete-buildroot/sources/openssh.client.ssh_config b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.ssh_config
index 2692e8913..2692e8913 100644
--- a/obsolete-buildroot/sources/openssh.client.ssh_config
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.client.ssh_config
diff --git a/obsolete-buildroot/sources/openssh.patch b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.patch
index 7d85a0400..7d85a0400 100644
--- a/obsolete-buildroot/sources/openssh.patch
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.patch
diff --git a/obsolete-buildroot/sources/openssh.server.S50sshd-ipk b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.S50sshd-ipk
index 6f77ad9b1..6f77ad9b1 100644
--- a/obsolete-buildroot/sources/openssh.server.S50sshd-ipk
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.S50sshd-ipk
diff --git a/obsolete-buildroot/sources/openssh.server.conffiles b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.conffiles
index 5877b3bdb..5877b3bdb 100644
--- a/obsolete-buildroot/sources/openssh.server.conffiles
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.conffiles
diff --git a/obsolete-buildroot/sources/openssh.server.control b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.control
index 943da932d..943da932d 100644
--- a/obsolete-buildroot/sources/openssh.server.control
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.control
diff --git a/obsolete-buildroot/sources/openssh.server.postinst b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.postinst
index 16d2bf4d7..16d2bf4d7 100644
--- a/obsolete-buildroot/sources/openssh.server.postinst
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.postinst
diff --git a/obsolete-buildroot/sources/openssh.server.preinst b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.preinst
index 029c78978..029c78978 100644
--- a/obsolete-buildroot/sources/openssh.server.preinst
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.preinst
diff --git a/obsolete-buildroot/sources/openssh.server.sshd_config b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.sshd_config
index 22e5dc212..22e5dc212 100644
--- a/obsolete-buildroot/sources/openssh.server.sshd_config
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.server.sshd_config
diff --git a/obsolete-buildroot/sources/openssh.sftp-client.control b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.sftp-client.control
index 12949f18f..12949f18f 100644
--- a/obsolete-buildroot/sources/openssh.sftp-client.control
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.sftp-client.control
diff --git a/obsolete-buildroot/sources/openssh.sftp-server.control b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.sftp-server.control
index 45f5c9aae..45f5c9aae 100644
--- a/obsolete-buildroot/sources/openssh.sftp-server.control
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssh/openssh.sftp-server.control
diff --git a/obsolete-buildroot/sources/openssl.control b/obsolete-buildroot/sources/openwrt/ipkg/openssl/control
index cc679a656..cc679a656 100644
--- a/obsolete-buildroot/sources/openssl.control
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssl/control
diff --git a/obsolete-buildroot/sources/openssl.patch b/obsolete-buildroot/sources/openwrt/ipkg/openssl/openssl.patch
index 2e8d50f1c..2e8d50f1c 100644
--- a/obsolete-buildroot/sources/openssl.patch
+++ b/obsolete-buildroot/sources/openwrt/ipkg/openssl/openssl.patch
diff --git a/obsolete-buildroot/sources/pppoecd.conffiles b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/conffiles
index 7ebe1156e..7ebe1156e 100644
--- a/obsolete-buildroot/sources/pppoecd.conffiles
+++ b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/conffiles
diff --git a/obsolete-buildroot/sources/pppoecd.control b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/control
index 6996b8eca..6996b8eca 100644
--- a/obsolete-buildroot/sources/pppoecd.control
+++ b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/control
diff --git a/obsolete-buildroot/sources/pppoecd.postrm b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/postrm
index 0d53d99f0..0d53d99f0 100644
--- a/obsolete-buildroot/sources/pppoecd.postrm
+++ b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/postrm
diff --git a/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/prerm b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/prerm
new file mode 100644
index 000000000..092bf0064
--- /dev/null
+++ b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/CONTROL/prerm
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+killall pppoecd
+sleep 3
+killall -9 pppoecd \ No newline at end of file
diff --git a/obsolete-buildroot/sources/pppoecd-pathnames.patch b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/pppoecd-pathnames.patch
index e6c109967..e6c109967 100644
--- a/obsolete-buildroot/sources/pppoecd-pathnames.patch
+++ b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/pppoecd-pathnames.patch
diff --git a/obsolete-buildroot/sources/pppoecd.patch b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/pppoecd.patch
index 4fa4afc25..4fa4afc25 100644
--- a/obsolete-buildroot/sources/pppoecd.patch
+++ b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/pppoecd.patch
diff --git a/obsolete-buildroot/sources/pppoecd.ip-up b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/root/etc/ppp/ip-up
index da432949e..da432949e 100644
--- a/obsolete-buildroot/sources/pppoecd.ip-up
+++ b/obsolete-buildroot/sources/openwrt/ipkg/pppoecd/root/etc/ppp/ip-up
diff --git a/obsolete-buildroot/sources/openwrt/ipkg/zlib/control b/obsolete-buildroot/sources/openwrt/ipkg/zlib/control
new file mode 100644
index 000000000..608176d81
--- /dev/null
+++ b/obsolete-buildroot/sources/openwrt/ipkg/zlib/control
@@ -0,0 +1,10 @@
+Package: zlib
+Priority: optional
+Version: 1.1.4-1
+Architecture: mipsel
+Maintainer: below0
+Section: libs
+Source: Embedded in the main OpenWrt buildroot
+Description: zlib is a library implementing the 'deflate' compression system used by many programs.
+
+
diff --git a/obsolete-buildroot/sources/compressed-20040531.tar.bz2 b/obsolete-buildroot/sources/openwrt/kernel/compressed-20040531.tar.bz2
index c8e06b8a9..c8e06b8a9 100644
--- a/obsolete-buildroot/sources/compressed-20040531.tar.bz2
+++ b/obsolete-buildroot/sources/openwrt/kernel/compressed-20040531.tar.bz2
Binary files differ
diff --git a/obsolete-buildroot/sources/openwrt-diag.c b/obsolete-buildroot/sources/openwrt/kernel/diag.c
index 6d93542f8..6d93542f8 100644
--- a/obsolete-buildroot/sources/openwrt-diag.c
+++ b/obsolete-buildroot/sources/openwrt/kernel/diag.c
diff --git a/obsolete-buildroot/sources/openwrt-wrt54g-linux.config b/obsolete-buildroot/sources/openwrt/kernel/linux.config
index 2c80db7c4..69e7c6e7e 100644
--- a/obsolete-buildroot/sources/openwrt-wrt54g-linux.config
+++ b/obsolete-buildroot/sources/openwrt/kernel/linux.config
@@ -351,6 +351,7 @@ CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_STRING=m
# CONFIG_IP_NF_MATCH_OWNER is not set
+CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_NETLINK=m
@@ -432,6 +433,25 @@ CONFIG_VLAN_8021Q=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=y
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_IPF=m
+CONFIG_BRIDGE_EBT_ARPF=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_VLANF=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_MARKF=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
diff --git a/obsolete-buildroot/sources/openwrt-linux-netfilter.patch b/obsolete-buildroot/sources/openwrt/kernel/patches/100-revert_netfilter.patch
index 4d8b0a1f6..4d8b0a1f6 100644
--- a/obsolete-buildroot/sources/openwrt-linux-netfilter.patch
+++ b/obsolete-buildroot/sources/openwrt/kernel/patches/100-revert_netfilter.patch
diff --git a/obsolete-buildroot/sources/openwrt-linux-sch_htb.patch b/obsolete-buildroot/sources/openwrt/kernel/patches/110-sch_htb.patch
index f74168aee..f74168aee 100644
--- a/obsolete-buildroot/sources/openwrt-linux-sch_htb.patch
+++ b/obsolete-buildroot/sources/openwrt/kernel/patches/110-sch_htb.patch
diff --git a/obsolete-buildroot/sources/openwrt-wrt54g-linux.patch b/obsolete-buildroot/sources/openwrt/kernel/patches/120-openwrt.patch
index 37c1dd34f..37c1dd34f 100644
--- a/obsolete-buildroot/sources/openwrt-wrt54g-linux.patch
+++ b/obsolete-buildroot/sources/openwrt/kernel/patches/120-openwrt.patch
diff --git a/obsolete-buildroot/sources/openwrt-wrt54g-nfsswap.patch b/obsolete-buildroot/sources/openwrt/kernel/patches/130-nfsswap.patch
index bf848c129..bf848c129 100644
--- a/obsolete-buildroot/sources/openwrt-wrt54g-nfsswap.patch
+++ b/obsolete-buildroot/sources/openwrt/kernel/patches/130-nfsswap.patch
diff --git a/obsolete-buildroot/sources/ebtables-brnf-5.patch b/obsolete-buildroot/sources/openwrt/kernel/patches/140-ebtables-brnf-5.patch
index 707919e2b..707919e2b 100644
--- a/obsolete-buildroot/sources/ebtables-brnf-5.patch
+++ b/obsolete-buildroot/sources/openwrt/kernel/patches/140-ebtables-brnf-5.patch
diff --git a/obsolete-buildroot/sources/openwrt-wrt54g-router.patch b/obsolete-buildroot/sources/openwrt/patches/wrt54g-router.patch
index 4098f792e..4098f792e 100644
--- a/obsolete-buildroot/sources/openwrt-wrt54g-router.patch
+++ b/obsolete-buildroot/sources/openwrt/patches/wrt54g-router.patch
diff --git a/obsolete-buildroot/sources/openwrt-wrt54g-shared.patch b/obsolete-buildroot/sources/openwrt/patches/wrt54g-shared.patch
index f357885bc..f357885bc 100644
--- a/obsolete-buildroot/sources/openwrt-wrt54g-shared.patch
+++ b/obsolete-buildroot/sources/openwrt/patches/wrt54g-shared.patch
diff --git a/obsolete-buildroot/sources/addpattern.c b/obsolete-buildroot/sources/openwrt/tools/addpattern.c
index dbf8ed690..dbf8ed690 100644
--- a/obsolete-buildroot/sources/addpattern.c
+++ b/obsolete-buildroot/sources/openwrt/tools/addpattern.c
diff --git a/obsolete-buildroot/sources/openwrt/tools/trx.c b/obsolete-buildroot/sources/openwrt/tools/trx.c
new file mode 100644
index 000000000..5ec53fdcb
--- /dev/null
+++ b/obsolete-buildroot/sources/openwrt/tools/trx.c
@@ -0,0 +1,316 @@
+/*
+ * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* July 29, 2004
+ *
+ * This is a hacked replacement for the 'trx' utility used to create
+ * wrt54g .trx firmware files. It isn't pretty, but it does the job
+ * for me.
+ *
+ * As an extension, you can specify a larger maximum length for the
+ * .trx file using '-m'. It will be rounded up to be a multiple of 4K.
+ * NOTE: This space will be malloc()'d.
+ *
+ * TODO: Support '-b' option to specify offsets for each file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+
+uint32_t crc32buf(char *buf, size_t len);
+
+/**********************************************************************/
+/* from trxhdr.h */
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_VERSION 1
+#define TRX_MAX_LEN 0x3A0000
+#define TRX_NO_HEADER 1 /* Do not write TRX header */
+
+struct trx_header {
+ uint32_t magic; /* "HDR0" */
+ uint32_t len; /* Length of file including header */
+ uint32_t crc32; /* 32-bit CRC from flag_version to end of file */
+ uint32_t flag_version; /* 0:15 flags, 16:31 version */
+ uint32_t offsets[3]; /* Offsets of partitions from start of header */
+};
+
+/**********************************************************************/
+
+void usage(void) __attribute__ (( __noreturn__ ));
+
+void usage(void)
+{
+ fprintf(stderr, "Usage: trx [-o outfile] [-m maxlen] file [file [file]]\n");
+ exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+ FILE *out = stdout;
+ FILE *in;
+ char *ofn = NULL;
+ char *buf;
+ char *e;
+ int c, i;
+ size_t n;
+ unsigned long maxlen = TRX_MAX_LEN;
+ struct trx_header *p;
+
+ fprintf(stderr, "mjn3's trx replacement - v0.80\n");
+
+ while ((c = getopt(argc, argv, "o:m:")) != -1) {
+ switch (c) {
+ case 'o':
+ ofn = optarg;
+ break;
+ case 'm':
+ errno = 0;
+ maxlen = strtoul(optarg, &e, 0);
+ if (errno || (e == optarg) || *e) {
+ fprintf(stderr, "illegal numeric string\n");
+ usage();
+ }
+#undef ROUND
+#define ROUND 0x1000
+ if (maxlen & (ROUND-1)) {
+ maxlen += (ROUND - (maxlen & (ROUND-1)));
+ }
+ if (maxlen < ROUND) {
+ fprintf(stderr, "maxlen too small (or wrapped)\n");
+ usage();
+ }
+ break;
+ default:
+ usage();
+ }
+ }
+
+ if (ofn && !(out = fopen(ofn, "w"))) {
+ fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
+ usage();
+ }
+
+ if (optind == argc) {
+ fprintf(stderr, "we require at least one arg\n");
+ usage();
+ }
+
+ if (argc - optind > 3) {
+ fprintf(stderr, "too many args: %d > 3\n", argc - optind);
+ usage();
+ }
+
+ if (maxlen > TRX_MAX_LEN) {
+ fprintf(stderr, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n");
+ }
+
+ if (!(buf = malloc(maxlen))) {
+ fprintf(stderr, "malloc failed\n");
+ return EXIT_FAILURE;
+ }
+
+ p = (struct trx_header *) buf;
+
+ p->magic = TRX_MAGIC;
+ p->len = sizeof(struct trx_header);
+ p->flag_version = (TRX_VERSION << 16);
+
+ i = 0;
+
+ while (optind < argc) {
+ p->offsets[i++] = p->len;
+
+ if (!(in = fopen(argv[optind], "r"))) {
+ fprintf(stderr, "can not open \"%s\" for reading\n", argv[optind]);
+ usage();
+ }
+
+ n = fread(buf + p->len, 1, maxlen - p->len, in);
+ if (!feof(in)) {
+ fprintf(stderr, "fread failure or file \"%s\" too large\n",
+ argv[optind]);
+ fclose(in);
+ return EXIT_FAILURE;
+ }
+
+ fclose(in);
+
+ ++optind;
+
+ if (optind < argc) {
+#undef ROUND
+#define ROUND 4
+ if (n & (ROUND-1)) {
+ memset(buf + p->len + n, 0, ROUND - (n & (ROUND-1)));
+ n += ROUND - (n & (ROUND-1));
+ }
+ }
+
+ p->len += n;
+ }
+
+#undef ROUND
+#define ROUND 0x1000
+ n = p->len & (ROUND-1);
+ if (n) {
+ memset(buf + p->len, 0, ROUND - n);
+ p->len += ROUND - n;
+ }
+
+ p->crc32 = crc32buf((char *) &p->flag_version,
+ p->len - offsetof(struct trx_header, flag_version));
+
+ if (!fwrite(buf, p->len, 1, out) || fflush(out)) {
+ fprintf(stderr, "fwrite failed\n");
+ return EXIT_FAILURE;
+ }
+
+ fclose(out);
+
+ return EXIT_SUCCESS;
+}
+
+/**********************************************************************/
+/* The following was grabbed and tweaked from the old snippets collection
+ * of public domain C code. */
+
+/**********************************************************************\
+|* Demonstration program to compute the 32-bit CRC used as the frame *|
+|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *|
+|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *|
+|* protocol). The 32-bit FCS was added via the Federal Register, *|
+|* 1 June 1982, p.23798. I presume but don't know for certain that *|
+|* this polynomial is or will be included in CCITT V.41, which *|
+|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *|
+|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *|
+|* errors by a factor of 10^-5 over 16-bit FCS. *|
+\**********************************************************************/
+
+/* Copyright (C) 1986 Gary S. Brown. You may use this program, or
+ code or tables extracted from it, as desired without restriction.*/
+
+/* First, the polynomial itself and its table of feedback terms. The */
+/* polynomial is */
+/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
+/* Note that we take it "backwards" and put the highest-order term in */
+/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
+/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
+/* the MSB being 1. */
+
+/* Note that the usual hardware shift register implementation, which */
+/* is what we're using (we're merely optimizing it by doing eight-bit */
+/* chunks at a time) shifts bits into the lowest-order term. In our */
+/* implementation, that means shifting towards the right. Why do we */
+/* do it this way? Because the calculated CRC must be transmitted in */
+/* order from highest-order term to lowest-order term. UARTs transmit */
+/* characters in order from LSB to MSB. By storing the CRC this way, */
+/* we hand it to the UART in the order low-byte to high-byte; the UART */
+/* sends each low-bit to hight-bit; and the result is transmission bit */
+/* by bit from highest- to lowest-order term without requiring any bit */
+/* shuffling on our part. Reception works similarly. */
+
+/* The feedback terms table consists of 256, 32-bit entries. Notes: */
+/* */
+/* 1. The table can be generated at runtime if desired; code to do so */
+/* is shown later. It might not be obvious, but the feedback */
+/* terms simply represent the results of eight shift/xor opera- */
+/* tions for all combinations of data and CRC register values. */
+/* */
+/* 2. The CRC accumulation logic is the same for all CRC polynomials, */
+/* be they sixteen or thirty-two bits wide. You simply choose the */
+/* appropriate table. Alternatively, because the table can be */
+/* generated at runtime, you can start by generating the table for */
+/* the polynomial in question and use exactly the same "updcrc", */
+/* if your application needn't simultaneously handle two CRC */
+/* polynomials. (Note, however, that XMODEM is strange.) */
+/* */
+/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */
+/* of course, 32-bit entries work OK if the high 16 bits are zero. */
+/* */
+/* 4. The values must be right-shifted by eight bits by the "updcrc" */
+/* logic; the shift must be unsigned (bring in zeroes). On some */
+/* hardware you could probably optimize the shift in assembler by */
+/* using byte-swap instructions. */
+
+static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
+0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
+0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
+0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
+0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
+0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
+0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
+0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
+0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
+0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
+0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
+0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
+0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
+0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
+0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
+0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
+0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
+0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
+0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
+};
+
+#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
+
+uint32_t crc32buf(char *buf, size_t len)
+{
+ uint32_t crc;
+
+ crc = 0xFFFFFFFF;
+
+ for ( ; len; --len, ++buf)
+ {
+ crc = UPDC32(*buf, crc);
+ }
+
+ return crc;
+}
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/TZ b/obsolete-buildroot/sources/target_skeleton/etc/TZ
deleted file mode 100644
index 9fcb2a3c5..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/TZ
+++ /dev/null
@@ -1 +0,0 @@
-MST7MDT
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/fstab b/obsolete-buildroot/sources/target_skeleton/etc/fstab
deleted file mode 100644
index 6d33629a7..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/fstab
+++ /dev/null
@@ -1,8 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt> <type> <options> <dump> <pass>
-/dev/root / ext2 rw,noauto 0 1
-proc /proc proc defaults 0 0
-devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
-tmpfs /tmp tmpfs defaults 0 0
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/group b/obsolete-buildroot/sources/target_skeleton/etc/group
deleted file mode 100644
index a21ef0f76..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/group
+++ /dev/null
@@ -1,10 +0,0 @@
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-utmp:x:43:
-staff:x:50:
-default:x:1000:
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/hostname b/obsolete-buildroot/sources/target_skeleton/etc/hostname
deleted file mode 100644
index 52e67d68a..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/hostname
+++ /dev/null
@@ -1 +0,0 @@
-uclibc
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/hosts b/obsolete-buildroot/sources/target_skeleton/etc/hosts
deleted file mode 100644
index ba712fe03..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/hosts
+++ /dev/null
@@ -1 +0,0 @@
-127.0.0.1 localhost
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/init.d/S20urandom b/obsolete-buildroot/sources/target_skeleton/etc/init.d/S20urandom
deleted file mode 100755
index 433fafee4..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/init.d/S20urandom
+++ /dev/null
@@ -1,44 +0,0 @@
-#! /bin/sh
-#
-# urandom This script saves the random seed between reboots.
-# It is called from the boot, halt and reboot scripts.
-#
-# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl
-#
-
-[ -c /dev/urandom ] || exit 0
-#. /etc/default/rcS
-
-case "$1" in
- start|"")
- if [ "$VERBOSE" != no ]
- then
- echo -n "Initializing random number generator... "
- fi
- # Load and then save 512 bytes,
- # which is the size of the entropy pool
- if [ -f /etc/random-seed ]
- then
- cat /etc/random-seed >/dev/urandom
- fi
- rm -f /etc/random-seed
- umask 077
- dd if=/dev/urandom of=/etc/random-seed count=1 \
- >/dev/null 2>&1 || echo "urandom start: failed."
- umask 022
- [ "$VERBOSE" != no ] && echo "done."
- ;;
- stop)
- # Carry a random seed from shut-down to start-up;
- # see documentation in linux/drivers/char/random.c
- [ "$VERBOSE" != no ] && echo -n "Saving random seed... "
- umask 077
- dd if=/dev/urandom of=/etc/random-seed count=1 \
- >/dev/null 2>&1 || echo "urandom stop: failed."
- [ "$VERBOSE" != no ] && echo "done."
- ;;
- *)
- echo "Usage: urandom {start|stop}" >&2
- exit 1
- ;;
-esac
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/init.d/S40network b/obsolete-buildroot/sources/target_skeleton/etc/init.d/S40network
deleted file mode 100755
index d835d9c72..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/init.d/S40network
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# Start the network....
-#
-
-start() {
- echo "Starting network..."
- /sbin/ifup -a
-}
-stop() {
- echo -n "Stopping network..."
- /sbin/ifdown -a
-}
-restart() {
- stop
- start
-}
-
-case "$1" in
- start)
- start
- ;;
- stop)
- stop
- ;;
- restart|reload)
- restart
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart}"
- exit 1
-esac
-
-exit $?
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/init.d/rcS b/obsolete-buildroot/sources/target_skeleton/etc/init.d/rcS
deleted file mode 100755
index de411534d..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/init.d/rcS
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
- # Ignore dangling symlinks (if any).
- [ ! -f "$i" ] && continue
-
- case "$i" in
- *.sh)
- # Source shell script for speed.
- (
- trap - INT QUIT TSTP
- set start
- . $i
- )
- ;;
- *)
- # No sh extension, so fork subprocess.
- $i start
- ;;
- esac
-done
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/inittab b/obsolete-buildroot/sources/target_skeleton/etc/inittab
deleted file mode 100644
index a6c014e75..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/inittab
+++ /dev/null
@@ -1,47 +0,0 @@
-# /etc/inittab
-#
-# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
-#
-# Note: BusyBox init doesn't support runlevels. The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use
-# sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action == one of sysinit, respawn, askfirst, wait, and once
-# process == program to run
-
-# Startup the system
-null::sysinit:/bin/mount -o remount,rw /
-null::sysinit:/bin/mount -t proc proc /proc
-null::sysinit:/bin/mount -a
-null::sysinit:/bin/hostname -F /etc/hostname
-null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
-null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
-# now run any rc scripts
-::sysinit:/etc/init.d/rcS
-
-# Set up a couple of getty's
-tty1::respawn:/sbin/getty 38400 tty1
-tty2::respawn:/sbin/getty 38400 tty2
-
-# Put a getty on the serial port
-#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
-# Logging junk
-null::sysinit:/bin/touch /var/log/messages
-null::respawn:/sbin/syslogd -n -m 0
-null::respawn:/sbin/klogd -n
-tty3::respawn:/usr/bin/tail -f /var/log/messages
-
-# Stuff to do for the 3-finger salute
-::ctrlaltdel:/sbin/reboot
-
-# Stuff to do before rebooting
-null::shutdown:/usr/bin/killall klogd
-null::shutdown:/usr/bin/killall syslogd
-null::shutdown:/bin/umount -a -r
-null::shutdown:/sbin/swapoff -a
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/inputrc b/obsolete-buildroot/sources/target_skeleton/etc/inputrc
deleted file mode 100644
index 2f1cb601a..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/inputrc
+++ /dev/null
@@ -1,44 +0,0 @@
-# /etc/inputrc - global inputrc for libreadline
-# See readline(3readline) and `info readline' for more information.
-
-# Be 8 bit clean.
-set input-meta on
-set output-meta on
-set bell-style visible
-
-# To allow the use of 8bit-characters like the german umlauts, comment out
-# the line below. However this makes the meta key not work as a meta key,
-# which is annoying to those which don't need to type in 8-bit characters.
-
-# set convert-meta off
-
-"\e0d": backward-word
-"\e0c": forward-word
-"\e[h": beginning-of-line
-"\e[f": end-of-line
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-#"\e[5~": beginning-of-history
-#"\e[6~": end-of-history
-"\e[3~": delete-char
-"\e[2~": quoted-insert
-
-# Common standard keypad and cursor
-# (codes courtsey Werner Fink, <werner@suse.de>)
-#"\e[1~": history-search-backward
-"\e[2~": yank
-"\e[3~": delete-char
-#"\e[4~": set-mark
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-# Normal keypad and cursor of xterm
-"\e[F": end-of-line
-"\e[H": beginning-of-line
-# Application keypad and cursor of xterm
-"\eOA": previous-history
-"\eOC": forward-char
-"\eOB": next-history
-"\eOD": backward-char
-"\eOF": end-of-line
-"\eOH": beginning-of-line
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/issue b/obsolete-buildroot/sources/target_skeleton/etc/issue
deleted file mode 100644
index f24b862c9..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/issue
+++ /dev/null
@@ -1,4 +0,0 @@
-
-
-Welcome to the Erik's uClibc development environment.
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/network/interfaces b/obsolete-buildroot/sources/target_skeleton/etc/network/interfaces
deleted file mode 100644
index 218b82cde..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/network/interfaces
+++ /dev/null
@@ -1,4 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/passwd b/obsolete-buildroot/sources/target_skeleton/etc/passwd
deleted file mode 100644
index e0f473fc7..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/passwd
+++ /dev/null
@@ -1,13 +0,0 @@
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/profile b/obsolete-buildroot/sources/target_skeleton/etc/profile
deleted file mode 100644
index cc2e0beb8..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/profile
+++ /dev/null
@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- alias ll='/bin/ls --color=tty -laFh'
- alias ls='/bin/ls --color=tty -F'
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/protocols b/obsolete-buildroot/sources/target_skeleton/etc/protocols
deleted file mode 100644
index 98f9f2d30..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/protocols
+++ /dev/null
@@ -1,31 +0,0 @@
-# /etc/protocols:
-# $Id$
-#
-# Internet (IP) protocols
-#
-# from: @(#)protocols 5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip 0 IP # internet protocol, pseudo protocol number
-icmp 1 ICMP # internet control message protocol
-igmp 2 IGMP # Internet Group Management
-ggp 3 GGP # gateway-gateway protocol
-ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
-st 5 ST # ST datagram mode
-tcp 6 TCP # transmission control protocol
-egp 8 EGP # exterior gateway protocol
-pup 12 PUP # PARC universal packet protocol
-udp 17 UDP # user datagram protocol
-hmp 20 HMP # host monitoring protocol
-xns-idp 22 XNS-IDP # Xerox NS IDP
-rdp 27 RDP # "reliable datagram" protocol
-iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4
-xtp 36 XTP # Xpress Tranfer Protocol
-ddp 37 DDP # Datagram Delivery Protocol
-idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport
-rspf 73 RSPF #Radio Shortest Path First.
-vmtp 81 VMTP # Versatile Message Transport
-ospf 89 OSPFIGP # Open Shortest Path First IGP
-ipip 94 IPIP # Yet Another IP encapsulation
-encap 98 ENCAP # Yet Another IP encapsulation
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/random-seed b/obsolete-buildroot/sources/target_skeleton/etc/random-seed
deleted file mode 100644
index fbc7352fb..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/random-seed
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/resolv.conf b/obsolete-buildroot/sources/target_skeleton/etc/resolv.conf
deleted file mode 100644
index 71a86dd76..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/resolv.conf
+++ /dev/null
@@ -1,2 +0,0 @@
-domain dev.null
-nameserver 127.0.0.1
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/securetty b/obsolete-buildroot/sources/target_skeleton/etc/securetty
deleted file mode 100644
index 81616f38e..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/securetty
+++ /dev/null
@@ -1,12 +0,0 @@
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/services b/obsolete-buildroot/sources/target_skeleton/etc/services
deleted file mode 100644
index 13718ef3d..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/services
+++ /dev/null
@@ -1,302 +0,0 @@
-# /etc/services:
-# $Id$
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
-# are included, only the more common ones.
-
-tcpmux 1/tcp # TCP port service multiplexer
-echo 7/tcp
-echo 7/udp
-discard 9/tcp sink null
-discard 9/udp sink null
-systat 11/tcp users
-daytime 13/tcp
-daytime 13/udp
-netstat 15/tcp
-qotd 17/tcp quote
-msp 18/tcp # message send protocol
-msp 18/udp # message send protocol
-chargen 19/tcp ttytst source
-chargen 19/udp ttytst source
-ftp-data 20/tcp
-ftp 21/tcp
-fsp 21/udp fspd
-ssh 22/tcp # SSH Remote Login Protocol
-ssh 22/udp # SSH Remote Login Protocol
-telnet 23/tcp
-# 24 - private
-smtp 25/tcp mail
-# 26 - unassigned
-time 37/tcp timserver
-time 37/udp timserver
-rlp 39/udp resource # resource location
-nameserver 42/tcp name # IEN 116
-whois 43/tcp nicname
-re-mail-ck 50/tcp # Remote Mail Checking Protocol
-re-mail-ck 50/udp # Remote Mail Checking Protocol
-domain 53/tcp nameserver # name-domain server
-domain 53/udp nameserver
-mtp 57/tcp # deprecated
-bootps 67/tcp # BOOTP server
-bootps 67/udp
-bootpc 68/tcp # BOOTP client
-bootpc 68/udp
-tftp 69/udp
-gopher 70/tcp # Internet Gopher
-gopher 70/udp
-rje 77/tcp netrjs
-finger 79/tcp
-www 80/tcp http # WorldWideWeb HTTP
-www 80/udp # HyperText Transfer Protocol
-link 87/tcp ttylink
-kerberos 88/tcp kerberos5 krb5 # Kerberos v5
-kerberos 88/udp kerberos5 krb5 # Kerberos v5
-supdup 95/tcp
-# 100 - reserved
-hostnames 101/tcp hostname # usually from sri-nic
-iso-tsap 102/tcp tsap # part of ISODE.
-csnet-ns 105/tcp cso-ns # also used by CSO name server
-csnet-ns 105/udp cso-ns
-# unfortunately the poppassd (Eudora) uses a port which has already
-# been assigned to a different service. We list the poppassd as an
-# alias here. This should work for programs asking for this service.
-# (due to a bug in inetd the 3com-tsmux line is disabled)
-#3com-tsmux 106/tcp poppassd
-#3com-tsmux 106/udp poppassd
-rtelnet 107/tcp # Remote Telnet
-rtelnet 107/udp
-pop-2 109/tcp postoffice # POP version 2
-pop-2 109/udp
-pop-3 110/tcp # POP version 3
-pop-3 110/udp
-sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP
-sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP
-auth 113/tcp authentication tap ident
-sftp 115/tcp
-uucp-path 117/tcp
-nntp 119/tcp readnews untp # USENET News Transfer Protocol
-ntp 123/tcp
-ntp 123/udp # Network Time Protocol
-netbios-ns 137/tcp # NETBIOS Name Service
-netbios-ns 137/udp
-netbios-dgm 138/tcp # NETBIOS Datagram Service
-netbios-dgm 138/udp
-netbios-ssn 139/tcp # NETBIOS session service
-netbios-ssn 139/udp
-imap2 143/tcp # Interim Mail Access Proto v2
-imap2 143/udp
-snmp 161/udp # Simple Net Mgmt Proto
-snmp-trap 162/udp snmptrap # Traps for SNMP
-cmip-man 163/tcp # ISO mgmt over IP (CMOT)
-cmip-man 163/udp
-cmip-agent 164/tcp
-cmip-agent 164/udp
-xdmcp 177/tcp # X Display Mgr. Control Proto
-xdmcp 177/udp
-nextstep 178/tcp NeXTStep NextStep # NeXTStep window
-nextstep 178/udp NeXTStep NextStep # server
-bgp 179/tcp # Border Gateway Proto.
-bgp 179/udp
-prospero 191/tcp # Cliff Neuman's Prospero
-prospero 191/udp
-irc 194/tcp # Internet Relay Chat
-irc 194/udp
-smux 199/tcp # SNMP Unix Multiplexer
-smux 199/udp
-at-rtmp 201/tcp # AppleTalk routing
-at-rtmp 201/udp
-at-nbp 202/tcp # AppleTalk name binding
-at-nbp 202/udp
-at-echo 204/tcp # AppleTalk echo
-at-echo 204/udp
-at-zis 206/tcp # AppleTalk zone information
-at-zis 206/udp
-qmtp 209/tcp # The Quick Mail Transfer Protocol
-qmtp 209/udp # The Quick Mail Transfer Protocol
-z3950 210/tcp wais # NISO Z39.50 database
-z3950 210/udp wais
-ipx 213/tcp # IPX
-ipx 213/udp
-imap3 220/tcp # Interactive Mail Access
-imap3 220/udp # Protocol v3
-ulistserv 372/tcp # UNIX Listserv
-ulistserv 372/udp
-https 443/tcp # MCom
-https 443/udp # MCom
-snpp 444/tcp # Simple Network Paging Protocol
-snpp 444/udp # Simple Network Paging Protocol
-saft 487/tcp # Simple Asynchronous File Transfer
-saft 487/udp # Simple Asynchronous File Transfer
-npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS
-npmp-local 610/udp dqs313_qmaster # npmp-local / DQS
-npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS
-npmp-gui 611/udp dqs313_execd # npmp-gui / DQS
-hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS
-hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS
-#
-# UNIX specific services
-#
-exec 512/tcp
-biff 512/udp comsat
-login 513/tcp
-who 513/udp whod
-shell 514/tcp cmd # no passwords used
-syslog 514/udp
-printer 515/tcp spooler # line printer spooler
-talk 517/udp
-ntalk 518/udp
-route 520/udp router routed # RIP
-timed 525/udp timeserver
-tempo 526/tcp newdate
-courier 530/tcp rpc
-conference 531/tcp chat
-netnews 532/tcp readnews
-netwall 533/udp # -for emergency broadcasts
-uucp 540/tcp uucpd # uucp daemon
-afpovertcp 548/tcp # AFP over TCP
-afpovertcp 548/udp # AFP over TCP
-remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
-klogin 543/tcp # Kerberized `rlogin' (v5)
-kshell 544/tcp krcmd # Kerberized `rsh' (v5)
-kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
-#
-webster 765/tcp # Network dictionary
-webster 765/udp
-#
-# From ``Assigned Numbers'':
-#
-#> The Registered Ports are not controlled by the IANA and on most systems
-#> can be used by ordinary user processes or programs executed by ordinary
-#> users.
-#
-#> Ports are used in the TCP [45,106] to name the ends of logical
-#> connections which carry long term conversations. For the purpose of
-#> providing services to unknown callers, a service contact port is
-#> defined. This list specifies the port used by the server process as its
-#> contact port. While the IANA can not control uses of these ports it
-#> does register or list uses of these ports as a convienence to the
-#> community.
-#
-nfsdstatus 1110/tcp
-nfsd-keepalive 1110/udp
-
-ingreslock 1524/tcp
-ingreslock 1524/udp
-prospero-np 1525/tcp # Prospero non-privileged
-prospero-np 1525/udp
-datametrics 1645/tcp old-radius # datametrics / old radius entry
-datametrics 1645/udp old-radius # datametrics / old radius entry
-sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry
-sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry
-radius 1812/tcp # Radius
-radius 1812/udp # Radius
-radacct 1813/tcp # Radius Accounting
-radacct 1813/udp # Radius Accounting
-nfsd 2049/tcp nfs
-nfsd 2049/udp nfs
-cvspserver 2401/tcp # CVS client/server operations
-cvspserver 2401/udp # CVS client/server operations
-mysql 3306/tcp # MySQL
-mysql 3306/udp # MySQL
-rfe 5002/tcp # Radio Free Ethernet
-rfe 5002/udp # Actually uses UDP only
-cfengine 5308/tcp # CFengine
-cfengine 5308/udp # CFengine
-bbs 7000/tcp # BBS service
-#
-#
-# Kerberos (Project Athena/MIT) services
-# Note that these are for Kerberos v4, and are unofficial. Sites running
-# v4 should uncomment these and comment out the v5 entries above.
-#
-kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp
-kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp
-kerberos_master 751/udp # Kerberos authentication
-kerberos_master 751/tcp # Kerberos authentication
-passwd_server 752/udp # Kerberos passwd server
-krb_prop 754/tcp # Kerberos slave propagation
-krbupdate 760/tcp kreg # Kerberos registration
-kpasswd 761/tcp kpwd # Kerberos "passwd"
-kpop 1109/tcp # Pop with Kerberos
-knetd 2053/tcp # Kerberos de-multiplexor
-zephyr-srv 2102/udp # Zephyr server
-zephyr-clt 2103/udp # Zephyr serv-hm connection
-zephyr-hm 2104/udp # Zephyr hostmanager
-eklogin 2105/tcp # Kerberos encrypted rlogin
-#
-# Unofficial but necessary (for NetBSD) services
-#
-supfilesrv 871/tcp # SUP server
-supfiledbg 1127/tcp # SUP debugging
-#
-# Datagram Delivery Protocol services
-#
-rtmp 1/ddp # Routing Table Maintenance Protocol
-nbp 2/ddp # Name Binding Protocol
-echo 4/ddp # AppleTalk Echo Protocol
-zip 6/ddp # Zone Information Protocol
-#
-# Services added for the Debian GNU/Linux distribution
-poppassd 106/tcp # Eudora
-poppassd 106/udp # Eudora
-mailq 174/tcp # Mailer transport queue for Zmailer
-mailq 174/tcp # Mailer transport queue for Zmailer
-omirr 808/tcp omirrd # online mirror
-omirr 808/udp omirrd # online mirror
-rmtcfg 1236/tcp # Gracilis Packeten remote config server
-xtel 1313/tcp # french minitel
-coda_opcons 1355/udp # Coda opcons (Coda fs)
-coda_venus 1363/udp # Coda venus (Coda fs)
-coda_auth 1357/udp # Coda auth (Coda fs)
-coda_udpsrv 1359/udp # Coda udpsrv (Coda fs)
-coda_filesrv 1361/udp # Coda filesrv (Coda fs)
-codacon 1423/tcp venus.cmu # Coda Console (Coda fs)
-coda_aux1 1431/tcp # coda auxiliary service (Coda fs)
-coda_aux1 1431/udp # coda auxiliary service (Coda fs)
-coda_aux2 1433/tcp # coda auxiliary service (Coda fs)
-coda_aux2 1433/udp # coda auxiliary service (Coda fs)
-coda_aux3 1435/tcp # coda auxiliary service (Coda fs)
-coda_aux3 1435/udp # coda auxiliary service (Coda fs)
-cfinger 2003/tcp # GNU Finger
-afbackup 2988/tcp # Afbackup system
-afbackup 2988/udp # Afbackup system
-icp 3130/tcp # Internet Cache Protocol (Squid)
-icp 3130/udp # Internet Cache Protocol (Squid)
-postgres 5432/tcp # POSTGRES
-postgres 5432/udp # POSTGRES
-fax 4557/tcp # FAX transmission service (old)
-hylafax 4559/tcp # HylaFAX client-server protocol (new)
-noclog 5354/tcp # noclogd with TCP (nocol)
-noclog 5354/udp # noclogd with UDP (nocol)
-hostmon 5355/tcp # hostmon uses TCP (nocol)
-hostmon 5355/udp # hostmon uses TCP (nocol)
-ircd 6667/tcp # Internet Relay Chat
-ircd 6667/udp # Internet Relay Chat
-webcache 8080/tcp # WWW caching service
-webcache 8080/udp # WWW caching service
-tproxy 8081/tcp # Transparent Proxy
-tproxy 8081/udp # Transparent Proxy
-mandelspawn 9359/udp mandelbrot # network mandelbrot
-amanda 10080/udp # amanda backup services
-amandaidx 10082/tcp # amanda backup services
-amidxtape 10083/tcp # amanda backup services
-isdnlog 20011/tcp # isdn logging system
-isdnlog 20011/udp # isdn logging system
-vboxd 20012/tcp # voice box system
-vboxd 20012/udp # voice box system
-binkp 24554/tcp # Binkley
-binkp 24554/udp # Binkley
-asp 27374/tcp # Address Search Protocol
-asp 27374/udp # Address Search Protocol
-tfido 60177/tcp # Ifmail
-tfido 60177/udp # Ifmail
-fido 60179/tcp # Ifmail
-fido 60179/udp # Ifmail
-
-# Local services
-
diff --git a/obsolete-buildroot/sources/target_skeleton/etc/shadow b/obsolete-buildroot/sources/target_skeleton/etc/shadow
deleted file mode 100644
index 4941a1ac5..000000000
--- a/obsolete-buildroot/sources/target_skeleton/etc/shadow
+++ /dev/null
@@ -1,12 +0,0 @@
-root::10933:0:99999:7:::
-bin:*:10933:0:99999:7:::
-daemon:*:10933:0:99999:7:::
-adm:*:10933:0:99999:7:::
-lp:*:10933:0:99999:7:::
-sync:*:10933:0:99999:7:::
-shutdown:*:10933:0:99999:7:::
-halt:*:10933:0:99999:7:::
-uucp:*:10933:0:99999:7:::
-operator:*:10933:0:99999:7:::
-nobody:*:10933:0:99999:7:::
-default::10933:0:99999:7:::
diff --git a/obsolete-buildroot/sources/target_skeleton/root/.bash_history b/obsolete-buildroot/sources/target_skeleton/root/.bash_history
deleted file mode 100644
index e69de29bb..000000000
--- a/obsolete-buildroot/sources/target_skeleton/root/.bash_history
+++ /dev/null
diff --git a/obsolete-buildroot/sources/target_skeleton/root/.bash_logout b/obsolete-buildroot/sources/target_skeleton/root/.bash_logout
deleted file mode 100644
index 77ef1f950..000000000
--- a/obsolete-buildroot/sources/target_skeleton/root/.bash_logout
+++ /dev/null
@@ -1,7 +0,0 @@
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
- /dev/tty[0-9]*) clear
-esac
diff --git a/obsolete-buildroot/sources/target_skeleton/root/.bash_profile b/obsolete-buildroot/sources/target_skeleton/root/.bash_profile
deleted file mode 100644
index 27bf14953..000000000
--- a/obsolete-buildroot/sources/target_skeleton/root/.bash_profile
+++ /dev/null
@@ -1,15 +0,0 @@
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
- source ~/.bashrc
-fi
diff --git a/obsolete-buildroot/sources/target_skeleton/root/.bashrc b/obsolete-buildroot/sources/target_skeleton/root/.bashrc
deleted file mode 100644
index d13c8f902..000000000
--- a/obsolete-buildroot/sources/target_skeleton/root/.bashrc
+++ /dev/null
@@ -1,48 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias ll='/bin/ls --color=tty -laFh'
- alias ls='/bin/ls --color=tty -F'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/a/ansi b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/a/ansi
deleted file mode 100644
index d1e14008c..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/a/ansi
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/d/dumb b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/d/dumb
deleted file mode 100644
index ffdc8acf3..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/d/dumb
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/l/linux b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/l/linux
deleted file mode 100644
index e9ec115d5..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/l/linux
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/r/rxvt b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/r/rxvt
deleted file mode 100644
index ba6987a1a..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/r/rxvt
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screen b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screen
deleted file mode 100644
index 8f4206c81..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screen
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screen-w b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screen-w
deleted file mode 100644
index 965601433..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/screen-w
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/sun b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/sun
deleted file mode 100644
index 47c0d66fa..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/s/sun
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt100 b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt100
deleted file mode 100644
index 5cc9a88bb..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt100
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt220 b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt220
deleted file mode 100644
index cefb7b358..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt220
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt52 b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt52
deleted file mode 100644
index d55932876..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/v/vt52
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xterm b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xterm
deleted file mode 100644
index 89da67d08..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xterm
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xterm-xfree86 b/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xterm-xfree86
deleted file mode 100644
index eeac9d8d3..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/terminfo/x/xterm-xfree86
+++ /dev/null
Binary files differ
diff --git a/obsolete-buildroot/sources/target_skeleton/usr/share/udhcpc/default.script b/obsolete-buildroot/sources/target_skeleton/usr/share/udhcpc/default.script
deleted file mode 100755
index a52a7f812..000000000
--- a/obsolete-buildroot/sources/target_skeleton/usr/share/udhcpc/default.script
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-
-[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
-
-RESOLV_CONF="/etc/resolv.conf"
-[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
-[ -n "$subnet" ] && NETMASK="netmask $subnet"
-
-case "$1" in
- deconfig)
- /sbin/ifconfig $interface 0.0.0.0
- ;;
-
- renew|bound)
- /sbin/ifconfig $interface $ip $BROADCAST $NETMASK
-
- if [ -n "$router" ] ; then
- echo "deleting routers"
- while route del default gw 0.0.0.0 dev $interface ; do
- :
- done
-
- for i in $router ; do
- route add default gw $i dev $interface
- done
- fi
-
- echo -n > $RESOLV_CONF
- [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
- for i in $dns ; do
- echo adding dns $i
- echo nameserver $i >> $RESOLV_CONF
- done
- ;;
-esac
-
-exit 0