diff options
| -rwxr-xr-x | target/linux/ramips/base-files/etc/uci-defaults/02_network | 2 | ||||
| -rw-r--r-- | target/linux/ramips/dts/FREESTATION5.dts | 45 | ||||
| -rw-r--r-- | target/linux/ramips/rt305x/profiles/freestation5.mk | 2 |
3 files changed, 45 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 41907bf1d..fe81899e7 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -129,7 +129,6 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "0t 5" ;; - freestation5 | \ wcr-150gn) ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1" ;; @@ -255,6 +254,7 @@ ramips_setup_macs() all0239-3g | \ carambola | \ + freestation5 | \ w502u | \ wnce2001) lan_mac=$(mtd_get_mac_binary factory 40) diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts index 7b7d2d0af..a3cc8fc97 100644 --- a/target/linux/ramips/dts/FREESTATION5.dts +++ b/target/linux/ramips/dts/FREESTATION5.dts @@ -3,13 +3,25 @@ /include/ "rt3050.dtsi" / { - compatible = "FREESTATION5", "ralink,rt3052-soc"; + compatible = "FREESTATION5", "ralink,rt3050-soc"; model = "ARC FreeStation5"; chosen { bootargs = "console=ttyS0,115200"; }; + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; @@ -49,7 +61,7 @@ esw@10110000 { status = "okay"; - ralink,portmap = <0x3e>; + ralink,portmap = <0x01>; }; wmac@10180000 { @@ -59,4 +71,33 @@ otg@101c0000 { status = "okay"; }; + + gpio-export { + compatible = "gpio-export"; + // Used to enable power-over-ethernet passthrough from port0 to port1. + // Disable passthrough by default to prevent accidental equipment damage. + poe { + gpio-export,name = "poe-passthrough"; + gpio-export,output = <1>; // OUT_INIT_HIGH + gpios = <&gpio0 11 1>; // GPIO 11, ACTIVE_LOW + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + // The following leds are defined in the ArcOS firmware, but reportedly + // not present in the Freestation5 device. + wifi { + label = "freestation:unknown:wifi"; + gpios = <&gpio0 7 1>; + }; + powerg { + label = "freestation:unknown:powerg"; + gpios = <&gpio0 9 1>; + }; + usb { + label = "freestation:unknown:usb"; + gpios = <&gpio0 14 1>; + }; + }; }; diff --git a/target/linux/ramips/rt305x/profiles/freestation5.mk b/target/linux/ramips/rt305x/profiles/freestation5.mk index 6da1e68c2..a3c105b95 100644 --- a/target/linux/ramips/rt305x/profiles/freestation5.mk +++ b/target/linux/ramips/rt305x/profiles/freestation5.mk @@ -12,7 +12,7 @@ define Profile/FREESTATION5 endef define Profile/FREESTATION5/Description - Package set for ARC Flex FreeStation5 + Package set for ARC FreeStation, Flex mARC, iFlex, and SplitStation endef $(eval $(call Profile,FREESTATION5)) |