diff options
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c | 25 |
1 files changed, 22 insertions, 3 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c index 15dc7529c..fd8e5fce8 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c @@ -10,7 +10,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> - +#include <linux/platform_device.h> +#include <linux/rtl8366rb.h> #include <asm/mach-ar71xx/ar71xx.h> #include "machtype.h" @@ -29,6 +30,9 @@ #define TL_WR1043ND_GPIO_BTN_RESET 3 #define TL_WR1043ND_GPIO_BTN_QSS 7 +#define TL_WR1043ND_GPIO_RTL8366_SDA 18 +#define TL_WR1043ND_GPIO_RTL8366_SCK 19 + #define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20 #ifdef CONFIG_MTD_PARTITIONS @@ -104,6 +108,19 @@ static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = { } }; +static struct rtl8366rb_platform_data tl_wr1043nd_rtl8366rb_data = { + .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, + .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, +}; + +static struct platform_device tl_wr1043nd_rtl8366rb_device = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &tl_wr1043nd_rtl8366rb_data, + } +}; + static void __init tl_wr1043nd_setup(void) { u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); @@ -111,8 +128,7 @@ static void __init tl_wr1043nd_setup(void) ar71xx_set_mac_base(mac); - ar71xx_add_device_mdio(0x0); - + ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth0_data.phy_mask = 0x0; ar71xx_eth0_data.speed = SPEED_1000; @@ -128,9 +144,12 @@ static void __init tl_wr1043nd_setup(void) ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), tl_wr1043nd_leds_gpio); + platform_device_register(&tl_wr1043nd_rtl8366rb_device); + ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL, ARRAY_SIZE(tl_wr1043nd_gpio_buttons), tl_wr1043nd_gpio_buttons); + ar913x_add_device_wmac(eeprom, mac); } |