diff options
10 files changed, 596 insertions, 596 deletions
diff --git a/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings.h b/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings.h index cecd279b3..3a4b1350e 100644 --- a/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings.h +++ b/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings.h @@ -1,50 +1,50 @@ -/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA03
-#define MC_DC21_VALUE 0x1d00
-#define MC_DC22_VALUE 0x1d1d
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* was 0x7f */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA03 +#define MC_DC21_VALUE 0x1d00 +#define MC_DC22_VALUE 0x1d1d +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* was 0x7f */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings_r111.h b/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings_r111.h index 385f7e4e5..fd155973e 100644 --- a/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings_r111.h +++ b/package/uboot-ifxmips/files/board/ifx/danube/ddr_settings_r111.h @@ -1,50 +1,50 @@ -/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1200
-#define MC_DC22_VALUE 0x1212
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1200 +#define MC_DC22_VALUE 0x1212 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h index cecd279b3..3a4b1350e 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings.h @@ -1,50 +1,50 @@ -/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA03
-#define MC_DC21_VALUE 0x1d00
-#define MC_DC22_VALUE 0x1d1d
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* was 0x7f */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA03 +#define MC_DC21_VALUE 0x1d00 +#define MC_DC22_VALUE 0x1d1d +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* was 0x7f */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h index 385f7e4e5..fd155973e 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h +++ b/package/uboot-lantiq/files/board/infineon/easy50712/ddr_settings_r111.h @@ -1,50 +1,50 @@ -/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1200
-#define MC_DC22_VALUE 0x1212
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */ +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x300 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1200 +#define MC_DC22_VALUE 0x1212 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x2d89 +#define MC_DC30_VALUE 0x8300 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/infineon/easy50812/ar9_ddr196_settings.h b/package/uboot-lantiq/files/board/infineon/easy50812/ar9_ddr196_settings.h index b00177e0a..45daa188d 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50812/ar9_ddr196_settings.h +++ b/package/uboot-lantiq/files/board/infineon/easy50812/ar9_ddr196_settings.h @@ -1,51 +1,51 @@ -/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Samsung DDR K4H561638H Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
-
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x306
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x80B
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xD02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0x144 /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xF
-#define MC_DC18_VALUE 0x301
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1200
-#define MC_DC22_VALUE 0x1212
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x66 /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x5FB
-#define MC_DC29_VALUE 0x35DF
-#define MC_DC30_VALUE 0x99E9
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x600
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+/* Settings for Denali DDR SDRAM controller */ +/* Optimise for Samsung DDR K4H561638H Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */ + +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x306 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x80B +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xD02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0x144 /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xF +#define MC_DC18_VALUE 0x301 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1200 +#define MC_DC22_VALUE 0x1212 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x66 /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x5FB +#define MC_DC29_VALUE 0x35DF +#define MC_DC30_VALUE 0x99E9 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x600 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h index 4235086d5..9d5c9bf95 100644 --- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h +++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h @@ -1,49 +1,49 @@ -#ifndef _LINUX_ETRAXI2C_H
-#define _LINUX_ETRAXI2C_H
-
-/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */
-
-#define ETRAXI2C_IOCTYPE 44
-
-/* supported ioctl _IOC_NR's */
-
-/* in write operations, the argument contains both i2c
- * slave, register and value.
- */
-
-#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))
-#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))
-
-#define I2C_ARGSLAVE(arg) ((arg) >> 16)
-#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)
-#define I2C_ARGVALUE(arg) ((arg) & 0xff)
-
-#define I2C_WRITEREG 0x1 /* write to an I2C register */
-#define I2C_READREG 0x2 /* read from an I2C register */
-
-/*
-EXAMPLE usage:
-
- i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
- ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
-
- i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
- val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
-
-*/
-
-/* Extended part */
-#define I2C_READ 0x4 /* reads from I2C device */
-#define I2C_WRITE 0x3 /* writes to I2C device */
-#define I2C_WRITEREAD 0x5 /* writes to I2C device where to start reading */
-
-typedef struct _I2C_DATA
-{
- unsigned char slave; /* I2C address (8-bit representation) of slave device */
- unsigned char wbuf[256]; /* Write buffer (length = 256 bytes) */
- unsigned int wlen; /* Number of bytes to write from wbuf[] */
- unsigned char rbuf[256]; /* Read buffer (length = 256 bytes) */
- unsigned int rlen; /* Number of bytes to read into rbuf[] */
-} I2C_DATA;
-
-#endif
+#ifndef _LINUX_ETRAXI2C_H +#define _LINUX_ETRAXI2C_H + +/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */ + +#define ETRAXI2C_IOCTYPE 44 + +/* supported ioctl _IOC_NR's */ + +/* in write operations, the argument contains both i2c + * slave, register and value. + */ + +#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value)) +#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8)) + +#define I2C_ARGSLAVE(arg) ((arg) >> 16) +#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff) +#define I2C_ARGVALUE(arg) ((arg) & 0xff) + +#define I2C_WRITEREG 0x1 /* write to an I2C register */ +#define I2C_READREG 0x2 /* read from an I2C register */ + +/* +EXAMPLE usage: + + i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val); + ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg); + + i2c_arg = I2C_READARG(STA013_READ_ADDR, reg); + val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); + +*/ + +/* Extended part */ +#define I2C_READ 0x4 /* reads from I2C device */ +#define I2C_WRITE 0x3 /* writes to I2C device */ +#define I2C_WRITEREAD 0x5 /* writes to I2C device where to start reading */ + +typedef struct _I2C_DATA +{ + unsigned char slave; /* I2C address (8-bit representation) of slave device */ + unsigned char wbuf[256]; /* Write buffer (length = 256 bytes) */ + unsigned int wlen; /* Number of bytes to write from wbuf[] */ + unsigned char rbuf[256]; /* Read buffer (length = 256 bytes) */ + unsigned int rlen; /* Number of bytes to read into rbuf[] */ +} I2C_DATA; + +#endif diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h index 7de4ad62c..ddd99b0e5 100644 --- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h +++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h @@ -1,20 +1,20 @@ -#ifndef _I2C_ERRNO_H
-#define _I2C_ERRNO_H
-
-#define EI2CNOERRORS 0 /* All fine */
-#define EI2CBUSNFREE 1 /* I2C bus not free */
-#define EI2CWADDRESS 2 /* Address write failed */
-#define EI2CRADDRESS 3 /* Address read failed */
-#define EI2CSENDDATA 4 /* Sending data failed */
-#define EI2CRECVDATA 5 /* Receiving data failed */
-#define EI2CSTRTCOND 6 /* Start condition failed */
-#define EI2CRSTACOND 7 /* Repeated start condition failed */
-#define EI2CSTOPCOND 8 /* Stop condition failed */
-#define EI2CNOSNDBYT 9 /* Number of send bytes is 0, while there's a send buffer defined */
-#define EI2CNOSNDBUF 10 /* No send buffer defined, while number of send bytes is not 0 */
-#define EI2CNORCVBYT 11 /* Number of receive bytes is 0, while there's a receive buffer defined */
-#define EI2CNORCVBUF 12 /* No receive buffer defined, while number of receive bytes is not 0 */
-#define EI2CNOACKNLD 13 /* No acknowledge received from slave */
-#define EI2CNOMNUMBR 14 /* No MAJOR number received from kernel while registering the device */
-
-#endif /* _I2C_ERRNO_H */
+#ifndef _I2C_ERRNO_H +#define _I2C_ERRNO_H + +#define EI2CNOERRORS 0 /* All fine */ +#define EI2CBUSNFREE 1 /* I2C bus not free */ +#define EI2CWADDRESS 2 /* Address write failed */ +#define EI2CRADDRESS 3 /* Address read failed */ +#define EI2CSENDDATA 4 /* Sending data failed */ +#define EI2CRECVDATA 5 /* Receiving data failed */ +#define EI2CSTRTCOND 6 /* Start condition failed */ +#define EI2CRSTACOND 7 /* Repeated start condition failed */ +#define EI2CSTOPCOND 8 /* Stop condition failed */ +#define EI2CNOSNDBYT 9 /* Number of send bytes is 0, while there's a send buffer defined */ +#define EI2CNOSNDBUF 10 /* No send buffer defined, while number of send bytes is not 0 */ +#define EI2CNORCVBYT 11 /* Number of receive bytes is 0, while there's a receive buffer defined */ +#define EI2CNORCVBUF 12 /* No receive buffer defined, while number of receive bytes is not 0 */ +#define EI2CNOACKNLD 13 /* No acknowledge received from slave */ +#define EI2CNOMNUMBR 14 /* No MAJOR number received from kernel while registering the device */ + +#endif /* _I2C_ERRNO_H */ diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h index e4d4d2c7f..cac2d4689 100644 --- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h +++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h @@ -1,30 +1,30 @@ -#ifndef _I2C_H
-#define _I2C_H
-
-int i2c_init(void);
-
-/* High level I2C actions */
-int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
-unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
-
-/* Low level I2C */
-int i2c_start(void);
-int i2c_stop(void);
-int i2c_outbyte(unsigned char x);
-unsigned char i2c_inbyte(void);
-int i2c_getack(void);
-void i2c_sendack(void);
-void i2c_sendnack(void);
-
-/**GVC**/
-/* New low level I2C functions */
-int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen );
-int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen );
-int i2c_writeread( unsigned char slave
- , unsigned char* wbuf
- , unsigned char wlen
- , unsigned char* rbuf
- , unsigned char rlen
- );
-/**END GVC**/
-#endif /* _I2C_H */
+#ifndef _I2C_H +#define _I2C_H + +int i2c_init(void); + +/* High level I2C actions */ +int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); +unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg); + +/* Low level I2C */ +int i2c_start(void); +int i2c_stop(void); +int i2c_outbyte(unsigned char x); +unsigned char i2c_inbyte(void); +int i2c_getack(void); +void i2c_sendack(void); +void i2c_sendnack(void); + +/**GVC**/ +/* New low level I2C functions */ +int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen ); +int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen ); +int i2c_writeread( unsigned char slave + , unsigned char* wbuf + , unsigned char wlen + , unsigned char* rbuf + , unsigned char rlen + ); +/**END GVC**/ +#endif /* _I2C_H */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile index 9b4132985..90f36e63c 100644 --- a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile @@ -1,42 +1,42 @@ -#
-# linux/arch/mips/boot/compressed/Makefile
-#
-# create a compressed zImage from the original vmlinux
-#
-
-targets := zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o
-
-OBJS := $(obj)/head.o $(obj)/misc.o
-
-LD_ARGS := -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic
-OBJCOPY_ARGS := -O elf32-tradlittlemips
-
-ENTRY := $(obj)/../tools/entry
-FILESIZE := $(obj)/../tools/filesize
-
-drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-strip-flags = $(addprefix --remove-section=,$(drop-sections))
-
-
-$(obj)/vmlinux.bin.gz: vmlinux
- rm -f $(obj)/vmlinux.bin.gz
- $(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin
- gzip -v9f $(obj)/vmlinux.bin
-
-$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux
- $(CC) $(KBUILD_AFLAGS) \
- -DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \
- -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \
- -DLOADADDR=$(loadaddr) \
- -c -o $(obj)/head.o $<
-
-$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o
- $(OBJCOPY) \
- --add-section=.image=$(obj)/vmlinux.bin.gz \
- --set-section-flags=.image=contents,alloc,load,readonly,data \
- $(obj)/dummy.o $(obj)/piggy.o
- $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o
- $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
-
-zImage: $(obj)/vmlinuz
- $(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage
+# +# linux/arch/mips/boot/compressed/Makefile +# +# create a compressed zImage from the original vmlinux +# + +targets := zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o + +OBJS := $(obj)/head.o $(obj)/misc.o + +LD_ARGS := -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic +OBJCOPY_ARGS := -O elf32-tradlittlemips + +ENTRY := $(obj)/../tools/entry +FILESIZE := $(obj)/../tools/filesize + +drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options +strip-flags = $(addprefix --remove-section=,$(drop-sections)) + + +$(obj)/vmlinux.bin.gz: vmlinux + rm -f $(obj)/vmlinux.bin.gz + $(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin + gzip -v9f $(obj)/vmlinux.bin + +$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux + $(CC) $(KBUILD_AFLAGS) \ + -DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \ + -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \ + -DLOADADDR=$(loadaddr) \ + -c -o $(obj)/head.o $< + +$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o + $(OBJCOPY) \ + --add-section=.image=$(obj)/vmlinux.bin.gz \ + --set-section-flags=.image=contents,alloc,load,readonly,data \ + $(obj)/dummy.o $(obj)/piggy.o + $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o + $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap + +zImage: $(obj)/vmlinuz + $(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage diff --git a/tools/firmware-utils/src/nand_ecc.c b/tools/firmware-utils/src/nand_ecc.c index e270480d7..b1e930515 100644 --- a/tools/firmware-utils/src/nand_ecc.c +++ b/tools/firmware-utils/src/nand_ecc.c @@ -1,204 +1,204 @@ -/*
- * calculate ecc code for nand flash
- *
- * Copyright (C) 2008 yajin <yajin@vm-kernel.org>
- * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <fcntl.h>
-#include <stdio.h>
-
-#define DEF_NAND_PAGE_SIZE 2048
-#define DEF_NAND_OOB_SIZE 64
-#define DEF_NAND_ECC_OFFSET 0x28
-
-static int page_size = DEF_NAND_PAGE_SIZE;
-static int oob_size = DEF_NAND_OOB_SIZE;
-static int ecc_offset = DEF_NAND_ECC_OFFSET;
-
-/*
- * Pre-calculated 256-way 1 byte column parity
- */
-static const uint8_t nand_ecc_precalc_table[] = {
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
-};
-
-/**
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block
- * @dat: raw data
- * @ecc_code: buffer for ECC
- */
-int nand_calculate_ecc(const uint8_t *dat,
- uint8_t *ecc_code)
-{
- uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
- int i;
-
- /* Initialize variables */
- reg1 = reg2 = reg3 = 0;
-
- /* Build up column parity */
- for(i = 0; i < 256; i++) {
- /* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[*dat++];
- reg1 ^= (idx & 0x3f);
-
- /* All bit XOR = 1 ? */
- if (idx & 0x40) {
- reg3 ^= (uint8_t) i;
- reg2 ^= ~((uint8_t) i);
- }
- }
-
- /* Create non-inverted ECC code from line parity */
- tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */
- tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
- tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
- tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
- tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
- tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
- tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
- tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
-
- tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */
- tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
- tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
- tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
- tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
- tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
- tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
- tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
-
- /* Calculate final ECC code */
-#ifdef CONFIG_MTD_NAND_ECC_SMC
- ecc_code[0] = ~tmp2;
- ecc_code[1] = ~tmp1;
-#else
- ecc_code[0] = ~tmp1;
- ecc_code[1] = ~tmp2;
-#endif
- ecc_code[2] = ((~reg1) << 2) | 0x03;
-
- return 0;
-}
-
-/*
- * usage: bb-nandflash-ecc start_address size
- */
-void usage(const char *prog)
-{
- fprintf(stderr, "Usage: %s [options] <input> <output>\n"
- "Options:\n"
- " -p <pagesize> NAND page size (default: %d)\n"
- " -o <oobsize> NAND OOB size (default: %d)\n"
- " -e <offset> NAND ECC offset (default: %d)\n"
- "\n", prog, DEF_NAND_PAGE_SIZE, DEF_NAND_OOB_SIZE,
- DEF_NAND_ECC_OFFSET);
- exit(1);
-}
-
-/*start_address/size does not include oob
- */
-int main(int argc, char **argv)
-{
- uint8_t *page_data = NULL;
- uint8_t *ecc_data;
- int infd = -1, outfd = -1;
- int ret = 1;
- ssize_t bytes;
- int ch;
-
- while ((ch = getopt(argc, argv, "e:o:p:")) != -1) {
- switch(ch) {
- case 'p':
- page_size = strtoul(optarg, NULL, 0);
- break;
- case 'o':
- oob_size = strtoul(optarg, NULL, 0);
- break;
- case 'e':
- ecc_offset = strtoul(optarg, NULL, 0);
- break;
- default:
- usage(argv[0]);
- }
- }
- argc -= optind;
- if (argc < 2)
- usage(argv[0]);
-
- argv += optind;
-
- infd = open(argv[0], O_RDONLY, 0);
- if (infd < 0) {
- perror("open input file");
- goto out;
- }
-
- outfd = open(argv[1], O_WRONLY|O_CREAT|O_TRUNC, 0644);
- if (outfd < 0) {
- perror("open output file");
- goto out;
- }
-
- page_data = malloc(page_size + oob_size);
-
- while ((bytes = read(infd, page_data, page_size)) == page_size) {
- int j;
-
- ecc_data = page_data + page_size + ecc_offset;
- for (j = 0; j < page_size / 256; j++)
- {
- nand_calculate_ecc(page_data + j * 256, ecc_data);
- ecc_data += 3;
- }
- write(outfd, page_data, page_size + oob_size);
- }
-
- ret = 0;
-out:
- if (infd >= 0)
- close(infd);
- if (outfd >= 0)
- close(outfd);
- if (page_data)
- free(page_data);
- return ret;
-}
-
+/* + * calculate ecc code for nand flash + * + * Copyright (C) 2008 yajin <yajin@vm-kernel.org> + * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> +#include <stdlib.h> +#include <stdint.h> +#include <fcntl.h> +#include <stdio.h> + +#define DEF_NAND_PAGE_SIZE 2048 +#define DEF_NAND_OOB_SIZE 64 +#define DEF_NAND_ECC_OFFSET 0x28 + +static int page_size = DEF_NAND_PAGE_SIZE; +static int oob_size = DEF_NAND_OOB_SIZE; +static int ecc_offset = DEF_NAND_ECC_OFFSET; + +/* + * Pre-calculated 256-way 1 byte column parity + */ +static const uint8_t nand_ecc_precalc_table[] = { + 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00, + 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, + 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, + 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, + 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, + 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, + 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, + 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, + 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, + 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, + 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, + 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, + 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, + 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, + 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, + 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 +}; + +/** + * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block + * @dat: raw data + * @ecc_code: buffer for ECC + */ +int nand_calculate_ecc(const uint8_t *dat, + uint8_t *ecc_code) +{ + uint8_t idx, reg1, reg2, reg3, tmp1, tmp2; + int i; + + /* Initialize variables */ + reg1 = reg2 = reg3 = 0; + + /* Build up column parity */ + for(i = 0; i < 256; i++) { + /* Get CP0 - CP5 from table */ + idx = nand_ecc_precalc_table[*dat++]; + reg1 ^= (idx & 0x3f); + + /* All bit XOR = 1 ? */ + if (idx & 0x40) { + reg3 ^= (uint8_t) i; + reg2 ^= ~((uint8_t) i); + } + } + + /* Create non-inverted ECC code from line parity */ + tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */ + tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */ + tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */ + tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */ + tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */ + tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */ + tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */ + tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */ + + tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */ + tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */ + tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */ + tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */ + tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */ + tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */ + tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */ + tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */ + + /* Calculate final ECC code */ +#ifdef CONFIG_MTD_NAND_ECC_SMC + ecc_code[0] = ~tmp2; + ecc_code[1] = ~tmp1; +#else + ecc_code[0] = ~tmp1; + ecc_code[1] = ~tmp2; +#endif + ecc_code[2] = ((~reg1) << 2) | 0x03; + + return 0; +} + +/* + * usage: bb-nandflash-ecc start_address size + */ +void usage(const char *prog) +{ + fprintf(stderr, "Usage: %s [options] <input> <output>\n" + "Options:\n" + " -p <pagesize> NAND page size (default: %d)\n" + " -o <oobsize> NAND OOB size (default: %d)\n" + " -e <offset> NAND ECC offset (default: %d)\n" + "\n", prog, DEF_NAND_PAGE_SIZE, DEF_NAND_OOB_SIZE, + DEF_NAND_ECC_OFFSET); + exit(1); +} + +/*start_address/size does not include oob + */ +int main(int argc, char **argv) +{ + uint8_t *page_data = NULL; + uint8_t *ecc_data; + int infd = -1, outfd = -1; + int ret = 1; + ssize_t bytes; + int ch; + + while ((ch = getopt(argc, argv, "e:o:p:")) != -1) { + switch(ch) { + case 'p': + page_size = strtoul(optarg, NULL, 0); + break; + case 'o': + oob_size = strtoul(optarg, NULL, 0); + break; + case 'e': + ecc_offset = strtoul(optarg, NULL, 0); + break; + default: + usage(argv[0]); + } + } + argc -= optind; + if (argc < 2) + usage(argv[0]); + + argv += optind; + + infd = open(argv[0], O_RDONLY, 0); + if (infd < 0) { + perror("open input file"); + goto out; + } + + outfd = open(argv[1], O_WRONLY|O_CREAT|O_TRUNC, 0644); + if (outfd < 0) { + perror("open output file"); + goto out; + } + + page_data = malloc(page_size + oob_size); + + while ((bytes = read(infd, page_data, page_size)) == page_size) { + int j; + + ecc_data = page_data + page_size + ecc_offset; + for (j = 0; j < page_size / 256; j++) + { + nand_calculate_ecc(page_data + j * 256, ecc_data); + ecc_data += 3; + } + write(outfd, page_data, page_size + oob_size); + } + + ret = 0; +out: + if (infd >= 0) + close(infd); + if (outfd >= 0) + close(outfd); + if (page_data) + free(page_data); + return ret; +} + |