diff options
3 files changed, 14 insertions, 14 deletions
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h index 64918fe4d..1ba553555 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h @@ -61,15 +61,15 @@ #define CHIP_ID_ID_SHIFT 8 #define CHIP_ID_REV_MASK 0xff -#define SYSTEM_CONFIG_CPUCLK_SHIFT 18 -#define SYSTEM_CONFIG_CPUCLK_MASK 0x1 -#define SYSTEM_CONFIG_CPUCLK_320 0x0 -#define SYSTEM_CONFIG_CPUCLK_384 0x1 -#define SYSTEM_CONFIG_SRAM_CS0_MODE_SHIFT 2 -#define SYSTEM_CONFIG_SRAM_CS0_MODE_MASK 0x3 -#define SYSTEM_CONFIG_SRAM_CS0_MODE_NORMAL 0 -#define SYSTEM_CONFIG_SRAM_CS0_MODE_WDT 1 -#define SYSTEM_CONFIG_SRAM_CS0_MODE_BTCOEX 2 +#define RT305X_SYSCFG_CPUCLK_SHIFT 18 +#define RT305X_SYSCFG_CPUCLK_MASK 0x1 +#define RT305X_SYSCFG_CPUCLK_LOW 0x0 +#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 +#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2 +#define RT305X_SYSCFG_SRAM_CS0_MODE_MASK 0x3 +#define RT305X_SYSCFG_SRAM_CS0_MODE_NORMAL 0 +#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 1 +#define RT305X_SYSCFG_SRAM_CS0_MODE_BTCOEX 2 #define RT305X_GPIO_MODE_I2C BIT(0) #define RT305X_GPIO_MODE_SPI BIT(1) diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/clock.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/clock.c index dff3738d3..522bb4463 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/clock.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/clock.c @@ -33,13 +33,13 @@ void __init rt305x_clocks_init(void) u32 t; t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); - t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); + t = ((t >> RT305X_SYSCFG_CPUCLK_SHIFT) & RT305X_SYSCFG_CPUCLK_MASK); switch (t) { - case SYSTEM_CONFIG_CPUCLK_320: + case RT305X_SYSCFG_CPUCLK_LOW: rt305x_cpu_clk.rate = 320000000; break; - case SYSTEM_CONFIG_CPUCLK_384: + case RT305X_SYSCFG_CPUCLK_HIGH: rt305x_cpu_clk.rate = 384000000; break; } diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c index a162515c0..60e571179 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c @@ -229,8 +229,8 @@ void __init rt305x_register_wdt(void) /* enable WDT reset output on pin SRAM_CS_N */ t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); - t |= SYSTEM_CONFIG_SRAM_CS0_MODE_WDT << - SYSTEM_CONFIG_SRAM_CS0_MODE_SHIFT; + t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT << + RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT; rt305x_sysc_wr(t, SYSC_REG_SYSTEM_CONFIG); platform_device_register(&rt305x_wdt_device); |